I Know why you here ??
you bought SuberSonic sc-66g Internet Tv Box but there is no support from this company ,that sad ,i have the same problem .but you know that this box not SuperSonic box ,its actually for company called peal its a German co.
supersonic don't support it .but the manufacture for this box is peal and they sell it by the name of Meteorit MMB-322 HDTV where they support it and and upgrade it ,anyway her is the link for this company
http://www.pearl.de/support/s50t.jsp?query=MMB-22&query_type=1
we will need it when we update the box.
anyway .here we will Root the box and update it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
lets start
Root the box
we need some programs
1-Android SDK should be installed in your PC ,if you don't have it here is the link
http://developer.android.com/sdk/index.html
2-MMB-322 Toolbox =to connect to the box by the box IP ,here is te link
http://www.multiupload.com/CK3COYEOF2
thanks to M1cha in Germany for this tool.
to root it its very simple
1 - you need to know the box IP
2-unzip MMB-322 Toolbox to any folder in your desktop and run MMB322-Toolbox.jar,widow should pop up look like this
http://img52.imageshack.us/img52/1527/infosl.png
3-go tools and hit su install,then superuser.apk install and you can install the market .
the box will reboot after you install the market .
now you rooted
ps . to know the IP for the box .
if you have Verizon go to your browser (chrome or ie ..)and inter this address HTTP://192.168.1.1 ==window pop up ask for username and the password
the default
username =admin the password=password and you will see all connected devices to you you network .
if you have Comcast use HTTP://10.0.0.1 ---and the same way .
UPDATE the Firmware
Note: that the logo will change from supersonic to Meteorit ,but its the same Firmware.
you need
1.7z program ===to change the script
2.MMB-322 Toolbox ===to root it after
3-USB flash drive any size over 256 MB formatted to fat32
4 -the latest Firmware from peal here http://www.pearl.de/support/s50t.jsp?query=MMB-22&query_type=1
the latest is Firmware for PX1534
install
1-download the Firmware =unzip to any folder inside the zip file you have online_upgrade_img folder =open it
2-open emergency_recovery.sh with notepad
change this script from 0 to ?
like this
$0`if [ $0 -eq ? ] to $?`if [ $? -eq ? ] save and close
if you don't do that supersonic box will not update and it will give you this massage infited image i/o error and the update will failed.
3-open ouimg.bin with 7z ==go to folder indep_rootfs =open it =you will find
this file emergency_recovery.sh again with 6 other files end with .sh open them one by one useing notepad and change this script from 0 to ? and make sure
a-you save them after you change each one .
b- 7z manager save the changes .
4-copy the whole folder (online_upgrade_img) to your formatted USB flash drive
5- in the box go settings =system upgrade =local device ,the box will reboot to recovery =insert the USB flash drive and don't worry i take some time .
ps .it it take more than 5 minuets , unplug and keep the USB in the box ,plug it again and restart ,it will take to recovery again .
6-push enter in you remote when you see the update.
7-let it install when it done it reboot ,remove the USB drive and you done
good luck
if you need more info go to .
Meteorit- Wiki
http://meteorit.wikia.com/wiki/Meteorit-_Wiki
factory upgrade instuctions
1st
Unzip the contents of the downloaded zip file into a
any folder on your PC.
2nd
Copy the unzipped folder named
"online_upgrade_img" and its contents to an empty USB memory stick
and plug the USB memory stick and then into the meteorite
TV Box.
3rd
Now select the main menu of the meteorite TV box, select
"Settings" then "System Upgrade" and then "Local
Devices ".
4th
Now select "System Upgrade" and confirm the upgrade
with the "Enter" key on the remote control of the meteorite TV box.
Please disconnect the device during the update process by NOT
Mains! Wait until the process is complete.
Following the installation will start the Android TV Box
automatically before they get you with the improvements from the
Update is available.
Wait about 15 seconds until the WLAN is turned on automatically.
Related
A. TUTORIAL ROOT
TOOLS AND MATERIALS :
Driverhttp://ge.tt/8sELSyg/v/3
Binary Root Toolhttp://www.4shared.com/archive/4-yfGgH3/Root_with_Restore_by_Bin4ry_v1.htm
STEP WORK:
Make sure your phone is in USB Debugging is checked state (settings / development / here)
Source Unknown tick (setting security / Unknown Source)
Make sure the driver is installed correctly in leptop / PC
Extract results donwload Binary file Root Tool then click RunMe.bat
A command prompt will open and you select number 1. Normal, wait until you appear in hp T1E notification, then select restore my data is, then a few moments later your phone will reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After reboot check if superuser app is already available? If he immediately tests with applications that require root privileges. If the application runs, you've survived phone Root well.
B. TUTORIAL INSTALL CWM
TOOLS AND MATERIALS :
Mod Recovery
Driverhttp://ge.tt/8sELSyg/v/3
SP Flahs Toolttp://ge.tt/5Edn9gh?c
STEP WORK:
Download all the above ingredients, make sure leptop / pc has its drivers installed correctly
Then extract Mod Recovery.zip, (boot.img, recovery.img and open the file created Scatter)
Open SP Flash Tool.exe
Then enter the file Scatter file created on the left kollom scatter loading.
Then check BOOTIMG, then click and enter the boot.img file that you have downloaded earlier.
Then check back RECOVERY section and click then enter the recovery file that you have downloaded earlier.
And connect it to the leptop / pc hp are turned off, waiting indication in SP Flash TOOL detect your phone
Then press the Download / F9 in SP Flash Tool, wait until the process is complete.
If all processes are finished, enter cwm do the test in the off state by press the power button + volume up. If successful it will look like this
All credits to Rua1, super-mega brain and MTKdroidTools creator.
=============================================================================================
How Nandroid Backup via CWM?
Enter cwm (phone off using the power button + volume combining up)
Use the navigation on the bottom with volume up + down keys, the enter key to power
Select backup & restore
Then select the backup to internal sdcard, wait until all processes are running without any error
And select reboot system now
if all goes well the process, then there will be a new folder on your sdcard named "ClockworkMod" then in that folder there is a data folder backup your rom. example the folder name 2013-08-06.03.17.56
Great job and wonderful mastah. Very helpful :good:
bacrot78 said:
Great job and wonderful mastah. Very helpful :good:
Click to expand...
Click to collapse
Tqs.... Masta tonk pank :v
Kali on Android
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
By LSP.Yazan
Hi, in this tutorial I will explain how to install kali Linux on Android .
Apps you need :
1.Complete Linux.
2.Terminal emulator.
3.Vnc viewer.
*Note : you must root your device before start, if not rooted .ROOT IT BEFORE YOU START.
Step by step together.
•First install complete Linux installer from store.(external mirror Sourceforge.)
•Turn on USB debugging from developer menu in setting.
if developer menu not found go to About menu and click build number 5 times quickly then developer menu will appear above About menu.
•Open complete Linux installer from the left menu choose install guide.
•Choose Kali Linux, 4 pages will appear. From the page 2 click download image. While downloading download and install terminal and vnc. If you download apps before then play Candy crash or subway surf .
•Uncompressing the file you have download to root folder in your internal/external sdcard(mine external). 2 file will be there (check photo).
•From launch option in the left menu, choose Kali distribution(check photo).
•If you get Waring like this in photo click setting and press edit. Then choose the .IMG file where you extract the files.
•If everything right it must be like this (check photo).
•OK touch "Start Linux".
•Terminal will launch and ask you if you want to check image using md5 file, touch screen and write " n" without quotes. Press enter and wait while booting Kali.
•If booting done successful. you should see "[email protected]:/#" (check photo).
•thing remaining now just get Kali desktop in vnc.
•Run vnc and full text boxes with this:
Nickname (optional) : Loyal-Stars .
Password: "kalilinux" without quotes.
Address: 127.0.0.1 .
Port: 5900 .
Choose color format to 24-bit .
No other options needed.
Touch connect.
Boom and now this Kali Linux desktop.
If this tutorial is hard to understand or you don't get it yet check the full article here.
Just For Fun
Or watch this video :
Kali on Android
Don't forget to click like :angel:.
LSP. Yazan
i tried this before but i got error that the kernel doesn't support loop device
Sent from my Bl4de
!? Are you use official android for your phone ? I don't test Linux on cwm (unofficial kernel).
I tested on stock cm11 kernel & Phantom kernel
Sent from my Bl4de
it says dev/boocl/lopp255 nos such directory
please developer help me
Sent from my GT-P5110 using XDA Free mobile app
Hello guys since the android 6.0 update is out for this phone and many seemed to have issues upgrading it, i wrote down a guide on how to update it . Firstly there are two ways you can update your phone.
1) Via the wireless update app
2) Manually flashing the firmware
Steps:
1) Find the wireless update app on your phone and press check
2) You will be prompted to download the update file
3) Download.Install.Done.
If for some reason the first method does NOT work you can try this
1) Download the firmware file from here https://mega.nz/#!PQVWDaLZ!2ituEPLWpcAkbz9dR6dNk3E3rnl2z8YNELQ7xcYi7t0
2) Download the flash tool from here https://mega.nz/#!7AcjGCLY!5LtavmoUaz8N_GzRwJqhD9tWwRDapplAKu7TMmON7F4
3) Now open the flash tool by double clicking the SPMultiPortFlashDownloadProject.exe file
4) File -> Open Download Agent File and open this file MTK_AllInOne_DA.bin from this folder MDT_V1620_ForUpgrade
5) Click the button Scatter File and select the file MT6735M_Android_scatter which is located in
OUKITEL_K10000_V8.0_20160620 folder
6) Click Scan
7) Long press volume (+) key on your device (phone in power off state) and connect it to your PC. When green bar shows, scan successfully disconnect your phone.
8) Click Stop All and then Start All, when the small window finishes connect again your phone to the PC and the update will start automatically.
9) When the first line goes grey (COM 4 + COM 3) it means its completed.
Voila!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PS: Please let me know if i am allowed to post the download links, if not i will upload them as attachments here!
Thank you.
Bypass Google Account Problem with K10000
Hi
After auto-update my Oukitel K10000 asks for google account I do not have (I have tried every known to me email but nothing happend). I have read all internet, have seen a lot of films - nothing.
1.I cannot enter the developer option (to enable USB) because tapping the build number does not work - ANY sugestions? or step-by-step method
2.I cannot install Quick Shortcut Maker Apk in any mode.
PLEASE help
Flash tool is down.
Edit:
Found alternatives here http://spmdttool.com/category/download
v5 is buggy.
|Tutorial|How to install third party wach faces&apps on android wear connected to ios
Hi everyone
After a lot of research i want to share with you guys the easiest way (in my opinion)to install third party watch faces and apps on your android wear connected to your iphone.
I AM NOT RESPONSIBLE FOR ANY DAMAGE ON YOUR DEVICE
Things you will need for this tutorial
A pc or laptop
Your watch with a usb cable to connet it to your pc/laptop
You have to install adb drivers
You also have to install formatter.here is the ling http://www.mediafire.com/?5a74bjg475er75d
if you have installed all tha above things,you are ready to start .
So now we are going to install Birdie Wear(this app is only an example)(with this method i am going to use now you can also install watch faces)thats just an example
now you have to download your app or watch face as an APK file and save it to your computer.the site i am using and is very good for downloading apks is called apkpure.here is the link https://www.google.gr/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjQ_Yyuk-jNAhXMshQKHT7IDTIQFggcMAA&url=https%3A%2F%2Fapkpure.com%2F&usg=AFQjCNEm8ShV63J8nv4STQxAFVWmBMkK8A&sig2=HxpiMM_9CrwwOBjItS9tJA
then go to your watch and activate developer option.just go to settings-about-find build number and tap it 10 times .then go back.after about on you setting you will see developer options.go there and find ADB debugging and ENABLE IT .connect your watch to your pc and if this the first time you do this a screen will appear with some options .just select ALWAYS TRUST THIS COMPUTER .
After you have done this go on your pc and OPEN the programm called FORMATTER.when you open it choose the apk file you want to install(for me on this thried is Birdie wear )and Set format :.rar .on the name type whatever you want and then click Rename!it should look like that
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After that your apk file now will be converted to a Rar file.open the rar file and go to res folder and after that to raw folder.in the raw folder you will find your apk that you have to install on the watch.copy that to your desktop
after that go to C:\adb(go to hard drive and open adb folder to your pc)then when on this folder press shift and right click to open command
when command is open 1.type: adb devices
then you will see your device name .if it says unothorised just unplug and plug your watch to the pc or laptop and type again adb devices(if you dont do this before after adb devices command go to your watch and select always trust this computer)
then after your device serial number it wiil say Device
then 2.type:adb install " apk file destination".it should look like that adb install C:\Users\BestUserEver\locationofapk\apk.apk
give it some time to install it AND YOU ARE DONE.THATS ALL. IT SEEMS TO BE A BIG THREAD BUT IF YOU DONE THIS ONE TIME IT WILL BE VERY EASY
SORRY FOR MY BAD ENGLISH ,I AM JUST 15 YEARS OLD FROM GREECE AND I HAVE BEEN SEARCHING FOR 3 DAYS TO GET IT DONE WITH MY WATCH.IF YOU HAVE ANY QUESTION JUST ADD A COMMECT HERE.
THANKS
Hi all. Today iam gona show you, how to unbrick softbricked (bootlop etc) HUAWEI MEDIAPAD T3 8 KOB-L09 in HARD WAY(When update from sd and over USB don`t work
WARNING: I AM NOT RESPONSE FOR ANY DAMAGE!!!
Firstable look on this site:
https://4pda.ru/forum/index.php?showtopic=828565
It describes how to do it if update from sd-card and update over usb fully works.
In this post, however, I will describe how to cope when both options do not work (the system does not recognize UPDATE.APP or update over usb does not work, or - after updating- tablet still continues to bootloop).
Ok, let`s start. Warning!!! It will be difficult and cost of money :/
Needed tools:
ADB & FASTBOOT
Additional drivers
DC-Phoenix(PAID!!) https://files.dc-unlocker.com/share.html?v=share/A5ABD248BD6D4FDBABDED15CE5046E64 or Huawei-Update-MultiLoader-Tool (FREE!!! )https://easy-firmware.com/index.php?a=downloads&b=file&id=3850
EF-tools from Easy Firmware to login into site.
Pendrive with at least 4GB freespace and OTG USB cable or SD-CARD.
We gonna also need board software(paid) And full software assined to our device. Thank`s good`s not all is paid
This software - among other things - allows updating via SD-CARD and OTG cable. Unfortunately, it's Chinese.
Uff!!!
How to flash Board Software with DC-PHOENIX?
First: battery at least 70% charged (for safety), but it would be best if it was 100%.
Download and install firmware and drivers for you device.
Buy a credits for DC-Phoenix, witch allow you to doing flash.
Download board software from Easy-Firmware site
Turn phone into fastboot/bootloader mode (powerdown device with long-pressed power key, push VOL- button and connect tablet to PC).
Open DC-Phoenix.
After opening u will see a login window.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enter the username and password, then log in to the server.
After login, u will see window with information, where u can get a tutorial to flash.
Regardless of what you press (yes or no), the program will guide you to main window.
On the right side u may choose update file and customisation file (usually main update file is in root of "dload" folder, and customisation file is in folder inside dload, but in case of "board software" the path-to-file ,after unpacking will be look something like that ~\KOB-L09C500B007\KOB-L09C500B007_降级包 ). In "Update firmware" tab we have two options: standard and advanced. Choose first one, and next in field "Update file" navigate to downloaded board software UPDATE.APP file. File will be loaded, and program will show you list of partitions to flash. Then press update button and wait for process to be end.
Tablet will be flashed with board software and reboot.
It may take a while to start. Do not turn off your tablet under any circumstances. This can result in a hard-to-repair software damage (hardbrick) what can result in the need to return the device to a specialist service. !!!
Well, we've received a tablet with the basic version of Android installed, with several test applications.
We do not need them.
How to flash Board Software with Huawei-Update-MultiLoader-Tool
Download Huawei-Update-MultiLoader-Tool.
Unpack and open it.
Select an UPDATE.APP file.
In next box select Android-Phone-Multi-Upgrade-Config-PCUI.xml file.
Click "Next", and wait until files will be loaded.
You will see another window.
Press together VOL+ and VOL-, then plug your USB cable and connetc device to PC.
Program will recognize device, else click "Scan" button in top of window.
Wait
Prepairng SD-CARD or USB drive
Copy the "dload" folder from the software appropriate for your device to the usb disk or sd-card. Then connect it with an OTG cable to the tablet or plug sd-card to device. Press and hold the power vol up and vol down buttons. The software update screen will appear, and update will start. When finished, the device will restart and you should enjoy "rescued" equipment. Another way is to boot in installed "Board" system, and select "SD upgrade" icon.
Unfortunately, I can not provide board software files because of the ownership rights.
It took me some time to find a way to repair it, so if u want to buy me a beer, that is my account number:
PL 37 1020 4317 0000 5402 0389 9689
IBAN BPKOPLPW
Thanks a lot for your support.
Good luck.
Kirzoczek said:
Hi all. Today iam gona show you, how to unbrick softbricked (bootlop etc) HUAWEI MEDIAPAD T3 8 KOB-L09 in HARD WAY(When update from sd and over USB don`t work
WARNING: I AM NOT RESPONSE FOR ANY DAMAGE!!!
...
Click to expand...
Click to collapse
You're not posting on the right section , learn more here :
https://forum.xda-developers.com/showthread.php?t=961655
Read carefully the forum rules to deal with paid app and stuff
Ok. I will change it asap.