[Q] Installed cm7 and seeing more 3g data drops? - HTC Sensation

Hey guys,
So I had just recently installed CM7 on my Sensation. One thing I noticed was that I seemed to be losing data a lot more frequently than when I was running the stock rom. Has anyone else ever heard/seen this issue? I'm using a t-mobile unit up in Canada's Wind network.
Any advice would be great,
Thanks!
J

It might be the radio you have installed. Can you tell us what radio you are using?

Hey thanks for the reply!
I think I had flashed the file that was provided in the rooting tutorial: http://forum.xda-developers.com/showthread.php?t=1192300
I was going to flash to the radio recommended on the CM7 thread but I decided not to since I saw both files were named PG58IMG
my current baseband is 10.56.9035.00P_100.14.9035.01_m

ok....so i just tried to update the radio. downloaded the zip from the cm7 thread. updated via booting into bootloader. followed all the steps. phone restarted...and now i'm stuck at htc load screen.
am i screwed?
*** problem fixed. wasn't aware that was the bootloop issue.

Related

[Q] Help. Flashed my Telus Nexus S with ATT firmware, now network type shows GPRS.

I'm (obviously) a bit of a newb when it comes to android, and I was flashing back from cm7 to see how it was done. When I reinstalled GRJ22, everything was working fine. I then downloaded and flashed the OTA update to GRK39C (or so I thought). It turns out it was the update to GRK39F, which apparently is ATT or GPRS specific. My phone now thinks it's on ATT and is trying to use GPRS.
I'm on Telus in canada, and use HSPDA.
The phone was also showing baseband version I9020AXXKF1, it should be I9020AUCKD1.
I've tried restoring from a backup, flashing back to cm7 and to stock fw's, and even tried flashing the radio.
My phone still shows GPRS, and now baseband version shows I9020AXXKD1.
Is there any way to fix this? I hope someone here is knowledgeable about this...
That baseband is associated with the i9020t, or the t-mobile variant. The canadian nexus s is identical to the at&t version.
There is a sticky with all the roms. Use it and get the right rom installed
Unfortunately, the ROM I need seems to be one of the missing ones. Is there any way to backup the radio from my wife's (identical) phone and flash it to mine?
It looks like the file I need is 5282b5b3eb74.signed-sojua-ota-178324.5282b5b3.zip but I'm unable to locate a working link for the file. Can anyone tell me if this is correct and/or provide a live link?
Actually that particular one you want has broken tethering... This is a dump is the 2.3.4 with I9020AUCKD1 radio from my US import i9020a tested and working on SaskTel HSDPA+.
http://dl.dropbox.com/u/7812800/Stock-GRJ22-i9020A-unsigned.zip (will need to be flashed via CWM Recovery)
Thanks! I got it working by flashing the unsigned ROM in the sticky thread, and I'm running cyanogenmod 7.1 RC now. I'll keep the stock ROM on file just in case though...
r.asimi said:
Thanks! I got it working by flashing the unsigned ROM in the sticky thread, and I'm running cyanogenmod 7.1 RC now. I'll keep the stock ROM on file just in case though...
Click to expand...
Click to collapse
Cool... I hope it works out well for you.
btw i got a rooted version of the stock 2.3.4 if you are interested as well.
So, for some reason flashing with your ROM set my phone to UMTS. Can someone refer me to a howto to backup a full ROM image from a phone, since my wife's is working fine and is on the right type of network.

[Q] Desire S loosing signal

Hi all,
A week ago I bought a brand new Desire S and installed latest CM 7.1 stable following the guide on cyanogemod Desire S Wiki using revolutionary 0.4pre4. Everything was smooth and nice, I flashed ROM and GAPPS and my phone is working absolutely perfectly... but there is one little problem...
I am using Desire to fetch my mails from 2 mailservers using IMAP every 30 mins. But when the phone is switching between network modes i.e. HSDPA -> EDGE or EDGE -> GSM or any other way, I am disconnected from operator network for about 10 seconds until the network mode changes and everything is fine after that, until there is another network mode switch.
This happens for me about 10 times a day, so my phone sometimes appears that It is turned off for people who want to call me. Immediately after connecting to network I get a missed call SMS from my operator.
Interesting thing is, that when I disable email fetching, disable background data transfer and disable network data, the phone works fine without "blackouts".
Can someone help me with this problem? Maybe a radio issue?
Some more info:
ROM: Cyanogenmod 7.1.0 Desire S
Recovery: Revolutionary CWM v4.0.1.4
HBOOT: 6.98.1002
Kernel: 2.6.35.14-cyanogenmod+ [email protected] #1
Radio: 20.28I.30.085AU_3805.06.02.03_M
There is a newer radio-file online.
Maybe it's solving your problem.
I'm using MIUI and never had such problems, but i'm interested in flashing CM, so please report if the problem is gone by flashing newer radio!
Which radio version are you using?
Today I am testing 2G only switch so I am on EDGE data only.
Flashing radios is safe......, but a bad radio flash will instantly brick your phone.
You are using 1.47.401.4 radio, try updating to the 2.10.401.5 one.
Thanks for reply.
Shoud I flash something else with the radio?
I have 20.4801.30.0822U_3822.10.08.04 downloaded from cmw.22aaf3.com
Another I have is ftom OTA update zip file OTA_Saga_S_HTC_Europe_2.10.401.8-1.47.401.4_release_225210fmxlt12djw1sr7y5.zip where is one radio.img in formware.zip file too - version unknown
So Which one to flash?
and if so, which method should I use to flash radio? The Android SDK one or the ZIP + Bootloader one?
MyroLM said:
Shoud I flash something else with the radio?
Click to expand...
Click to collapse
no need
MyroLM said:
I have 20.4801.30.0822U_3822.10.08.04 downloaded from cmw.22aaf3.com
Click to expand...
Click to collapse
this file is what ur looking for! check md5-checksum before flashing!
MyroLM said:
and if so, which method should I use to flash radio? The Android SDK one or the ZIP + Bootloader one?
Click to expand...
Click to collapse
Both will work, i'm using method by using bootloader normaly
Strangely I had the same issues as you on Endymion.
Then I updated radio to the latest.
It worked well.
Then I went to CM7. It was fine for a while, but now I'm losing signal with no 3G bars and its not switching automatically to 2G like it should when It has no 3G signal!
EDIT:
After really reading your post, I realise my issue is no way like yours! Yours seems really bad. Update your radio.
-------------------------------
Sent from my HTC Desire S
So, here we go with the results
I flashed 20.4801.30.0822U_3822.10.08.04, md5sum checked OK, update sucess, but phone with no signal...
I flashed 20.48.30.0822U_3822.09.08.20, md5sum checked OK, update sucess, but phone with no signal again...
I flashed 20.28I.30.085AU_3805.06.02.03 back, md5sum checked OK, update sucess, but phone with no signal again...
... what now ... ?
After each flash wiped cache and Dalvik...
in your telephone-info there is shown the new radio after every flash?
do you have removed the batterycover, because there is integrated the antenna of your device!
mouzzza said:
in your telephone-info there is shown the new radio after every flash?
Click to expand...
Click to collapse
Yes, correct number every time.
mouzzza said:
do you have removed the batterycover, because there is integrated the antenna of your device!
Click to expand...
Click to collapse
No, the cover is at its place where it should be. Somehow I did the trick and I am back online with 20.28I.30.085AU_3805.06.02.03 on 2G only for now.
I read somwhere in the forum that ENG HBOOT is required for new radios... Are you sure I dont need to flash eng hboot it before new radio ??
MyroLM said:
Somehow I did the trick and I am back online with 20.28I.30.085AU_3805.06.02.03 on 2G only for now
Click to expand...
Click to collapse
in your area 3g is actually available?
may it helps to go outside, to find your net for the first time!
did you set an accesspoint for 3g?
may you have to set automatic settings, rather than 3g/2g-only?!
MyroLM said:
I read somwhere in the forum that ENG HBOOT is required for new radios... Are you sure I dont need to flash eng hboot it before new radio ??
Click to expand...
Click to collapse
using same hboot as you, never had problems on flashing radio-files!
yes, in my area there is 3g, when I turn off 2g only switch there is a problem described in my first post, so i am on 2g for now just to keep phone connected to network.
main problem is when i am driving and the phone is switching network modes.
so I give 20.4801.30.0822U_3822.10.08.04 today another chance, try to flash if again.
but i am woried about stucking on HTC logo after flash :-( and brick it.
MyroLM said:
but i am woried about stucking on HTC logo after flash :-( and brick it.
Click to expand...
Click to collapse
i already had the problem for several times, and i also pulled out the battery (you shouldn't do that)!
only had to boot into bootloader, start recovery, wipe all partitions, flash rom and was having fun again with my device
this thread could help you, if really stuck on HTC logo
For your real problem on loosing the signal, did you ever tried out using actual stock rom, or another custom one like MIUI?
i used MIUI from 2010-08 till yesterday, now trying out CM7.1 for some days
I have the same or a very similar problem. I have the stock rom.
I already had 3 different desire s motherboard's and 2 different display's.
The first Desire S i had, with android 2.3.3, had a excellent signal. Due some problems i had, the phone bricked and had to go to HTC to repair.
HTC replaced the motherboard and update the version of the android to 2.3.5 and ever since the signal caption, the signal switch was working very bad.
The phone went to a second repair because of this, new phone, and again with android 2.3.5. The problems persisted.
I also tested with different SIM cards, from different mobile operators.
So, my conclusion is either android 2.3.5 or this new versions of Desire S have problems with signal caption and signal switch.
So as you, i need some help with this issue!
mouzzza said:
i already had the problem for several times, and i also pulled out the battery (you shouldn't do that)!
only had to boot into bootloader, start recovery, wipe all partitions, flash rom and was having fun again with my device
this thread could help you, if really stuck on HTC logo
For your real problem on loosing the signal, did you ever tried out using actual stock rom, or another custom one like MIUI?
i used MIUI from 2010-08 till yesterday, now trying out CM7.1 for some days
Click to expand...
Click to collapse
But when I reboot to recovery it will flash the radio again I think.
i hate stock roms, and dont like MIUI design That is why I am using Cyanogen
Anyway if I use 2G only switch, the phone is stable as rock both calls and data transfer.
EDIT: OK, flashed 20.4801.30.0822U_3822.10.08.04 sucessfully, signal OK, I will see what happens whet metwork mode switches
@Green Hawk:
give us more information about your device please, which radio you're using? Did they flash actual radion also?
@MyroLM:
report if the problem is still there or it's gone with flashing the rom
I am still testing new radio, but looks good Give me some days let you know...
Hi All,
I have a similar problem with the latest CM7.1 nightly builds (Reaper, jorgen2009). I never saw this with older CM7.1 versions, e.g. Nexx version, ICS, MIUI oder Endymion.
I have WLAN on and leave my house. Phone switches to 2G/3G..., so far so good. When I return home, The WLan sign in the status bar appears again, everything seems to be fine, but I have no connection. I get no data via WLan until I swicth WLan off and on again.
Radio is the latest from 2.10.401.5.
Best Regards
Wrapp
Had similar problems, upgrading to the latest radio helped. I got stuck on the HTC screen and I went through flashing RUU's and unlocking bootloaders back and forth... when the only thing that needs to be done is to wipe the cache.
Learned a lot about bootloaders though. But my warranty got void because i did the htcdev unlock... (Sorry for OT)

[Q] Rooted Thunderbolt data connecitvity issue. Any idea how to fix?

Hi everyone,
I started having problems with data connectivity after I downgraded and rooted my TB. I succesfully rooted my thunderbolt using the revolucionary method (I had to downgrade to be able to use this method) after that my i was not able to run at 4G speed as usual and it would suddenly lose conection just by looking at it . Or if i was lucky it would drop to 3G or get stuck at 1X. On top of that i started getting annoying OTA updates which i could not install because i was rooted and give error. So i did my homework and found out that the solution to the OTA was to switch to a custom rom. I flashed to "Liquid Gingerbread V3.0 (Version: Liquid.mecha.20111007.150023)" and the OTA stopped, i flushed a new radio MR4 (this it what it says on about phone> phone info> baseband 1.39.0030627r, &?u2.11?) but that did not solve the data problem. I like this rom, but it is very frustrating not having a reliable high speed internet. What can I do ? Did i do some wrong or flashed wrong Radio? Any help is appreciated.
Thanks in advance.

Firmware/Radio MAJOR Issue

Hi all, kind of a newbie, but I've been rooting phones for a few years and have never had this issue. I wanted to upgrade my ROM to Maximus HD 10 and that was a big mistake because it involved going to SuperCID and S-Off. I was successful with both, but I ended up uninstalling due to not getting 3G/4G. Well, plenty of uninstalling and trying new ROMS and still I am left with 2G only. I have flashed the latest T-Mobile US Radio but it doesn't seem to do anything. I'm thinking it is a firmware issue, so I was wondering if there is a firmware I need to flash and do I need to fastboot flash it or recovery flash it? I am tempted to call T-Mobile and just order a new phone in the first place, but I would really like to have 3G/4G back. What firmware do I need and also does installing a new RUU overwrite the CID, firmware, and radio? I would love to back to the T-Mobile CID and the stock rom. Please help, thanks!!!
Keep soff and flash tmob ruu. All ruu contains firmware.zip, so if you flash tmob ruu you will downgrade your hboot and radio. Also make sure you'll wipe sd card from bootloader after ruu.
Sent from my HTC One S
hitzradio said:
Hi all, kind of a newbie, but I've been rooting phones for a few years and have never had this issue. I wanted to upgrade my ROM to Maximus HD 10 and that was a big mistake because it involved going to SuperCID and S-Off. I was successful with both, but I ended up uninstalling due to not getting 3G/4G. Well, plenty of uninstalling and trying new ROMS and still I am left with 2G only. I have flashed the latest T-Mobile US Radio but it doesn't seem to do anything. I'm thinking it is a firmware issue, so I was wondering if there is a firmware I need to flash and do I need to fastboot flash it or recovery flash it? I am tempted to call T-Mobile and just order a new phone in the first place, but I would really like to have 3G/4G back. What firmware do I need and also does installing a new RUU overwrite the CID, firmware, and radio? I would love to back to the T-Mobile CID and the stock rom. Please help, thanks!!!
Click to expand...
Click to collapse
should have searched and read some threads before uninstalling maximusHD. Tons of folks, myself included, had 3G/4G issues after installing MaximusHD. All fixed now.
rgrpark said:
should have searched and read some threads before uninstalling maximusHD. Tons of folks, myself included, had 3G/4G issues after installing MaximusHD. All fixed now.
Click to expand...
Click to collapse
I have drop signal issues, 3g and 4g seems normal but lose complete signal constantly.
i had home button issue when signal drops from 3g to 2g. home button activates itself sometimes when browsing internet and often drop action to homescreen. that must be radio related. and sometimes stock browser loose connection while chrome works. got tired of these things and everything all working perfectly when going back to Viper roms. any ideas ?
Sent from my HTC One S using Tapatalk 4

[SOLVED] [T-Mobile] HTC ONE S (S4) 3G not connecting

Need some help for my device [T-Mobile] HTC ONE S (S4). I'm using in INDIA.
For the past 3 years i have used this phone in 3G network with out any issues. Last week i flashed a new ROM but after that i don't get 3G signal.
I tried a lot of ROM's and Radios but still it is not working. So i flashed the stock ROM and RADIO but still its not working. I understand the bands the T-Mobile uses differs but it was working fine before flashing a different ROM.
I don't know what to do.
So please if any one using the same do upload your ROM and RADIO and other things that influence the phone to work.
P.S: I posted in various threads and asking for help but i don't get any reply hence started a new thread so everyone like me can find it useful.
Thanks.
EDIT:
I flashed the Official T-Mobile JB RUU and my phone started to reboot after showing up the "preparing Phone Storage" (soft bricked)
Finally solved the issue:
I have flashed the official T-Mobile JB RUU after relocking the bootloader, S-ON, change CID- ********(Stock cid , In my case its T-MOB010).
Now i have a brand new phone working good.
Thanks to "xxgummyxx" (http://forum.xda-developers.com/showthread.php?t=1710781&page=2)
xcelent noobs said:
Need some help for my device [T-Mobile] HTC ONE S (S4). I'm using in INDIA.
For the past 3 years i have used this phone in 3G network with out any issues. Last week i flashed a new ROM but after that i don't get 3G signal.
I tried a lot of ROM's and Radios but still it is not working. So i flashed the stock ROM and RADIO but still its not working. I understand the bands the T-Mobile uses differs but it was working fine before flashing a different ROM.
I don't know what to do.
So please if any one using the same do upload your ROM and RADIO and other things that influence the phone to work.
P.S: I posted in various threads and asking for help but i don't get any reply hence started a new thread so everyone like me can find it useful.
Thanks.
Click to expand...
Click to collapse
No replies !!!!!!!
Look for a rom, for you telephone company, in the country you live now.
When you instal wipe everything (except SD card).
null0seven said:
Look for a rom, for you telephone company, in the country you live now.
When you instal wipe everything (except SD card).
Click to expand...
Click to collapse
thanks for the reply,
I tried it and still my radio gets error . voice quality gone to worst.
I tried to install a custom rom again without s-off and i succeded but my phone reboots occasionally and my radio disconnects from the network occasionally and do get it back i need to search for network.
Atleast all other things work good.
Im planning to try to flash my kernel with the official stock kernel downloaded from HTC .
Will post if that works.
Thanks again
Best voice quality is in stock rom!

Categories

Resources