Database Info

[Q] Failed upgrading to Simply Honey..

Hi I was using darky's rom gingerbread and tried upgrading to simply honey 5.0 revenge...
I removed voodoo lagfix and went to cwm recovery and tried installing the zip file from there..
installation was successful and booted well but my phone must have failed installing the neccessary apps to run the phone and kept getting errors..
so I went to download mode,
and tried to install the odin way.... now my odin is stuck...
"<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SH_5.0_Odin.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!"
I need help please............

[Q] PIT problems

I'm coming from a Galaxy S 4G I had loaded roms on all the time to an Infuse. I originally tried a heimdall one click that borked half way through. Now the phone won't cut on, but I can still get to download mode.
The problem now is I can't get ODIN to get to pass "Get PIT for mapping..." I got the package from this thread: http://forum.xda-developers.com/showthread.php?t=1705260 which includes the PIT file, but even putting the files in the right slots on ODIN it gets to the same point and hangs indefinitely.
Like I've said, I've done roms in the past and I've bricked and unbricked my old Galaxy S 4G a number of times, but this has got me stumped. I'm looking for suggestions and/or tips.

A little more info: Coming from stock Froyo 2.2.1. ODIN messages up until it hangs:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_UCLB3_root.tar.md5 is valid.
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
So obviously it tries to reset the PIT but when it calls back to it, nothing... The phone also responds to setting the PIT with a small fragment of the progress bar showing up but that's it.

Put the phone in DL mode and use this.......http://forum.xda-developers.com/showthread.php?t=1610374
I picked Option C...and it worked for me...Good luck

[Q] Help - SG2 Not starting

My SG2 has all of a sudden stopped working, It wont boot up, i can put it into Recovery mode, but Clockwork is saying it cannot mount the SD.
If i try a Factory reset/data wipe, It gets stuck on the Formatting section, The same thing happens if i try to flash another firmware (Pure ICS 2.0.1 and CWM recovery / Rouge XM Recovery and the default firmware)
Any Help would be greatly appreciated.
<ID:0/018> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEULP5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
<ID:0/018> Initialzation..
<ID:0/018> Get PIT for mapping..
<ID:0/018> Firmware update start..
<ID:0/018> boot.bin
<ID:0/018> NAND Write Start!!
This is the error i get while trying to put Stock on with Odin.
It stays like this forever.

[Q] I need help with Odin

My phone is in the download mode however everytime I try to use Odin, it won't get past factoryfs.rfs.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_UCKD5.tar.md5 is valid.
<OSM> PHONE_UCKD5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.rfs
This morning I tried it on my friend's laptop and it only went through half of factoryfs.rfs and it would just be stuck. My carrier is Rogers and I've been using GTG_ultimate_unbrick. I've also tried using heindell as well. On Heindell it says that Kernels can not be uploaded. Can anyone help me with this problem?

crazyshin said:
My phone is in the download mode however everytime I try to use Odin, it won't get past factoryfs.rfs.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_UCKD5.tar.md5 is valid.
<OSM> PHONE_UCKD5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.rfs
This morning I tried it on my friend's laptop and it only went through half of factoryfs.rfs and it would just be stuck. My carrier is Rogers and I've been using GTG_ultimate_unbrick. I've also tried using heindell as well. On Heindell it says that Kernels can not be uploaded. Can anyone help me with this problem?
Click to expand...
Click to collapse
different usb cord

I got through the factory.rfs but now I'm stuck on the boot logo

crazyshin said:
I got through the factory.rfs but now I'm stuck on the boot logo
Click to expand...
Click to collapse
3 fingers into recovery; factory reset, reboot?

@crazyshin -
What ROM were you running before attempting your first ODIN flash?
What ODIN package are you attempting to install (provide link if possible)?

[q] help required for bricked samsung gt-s6102

My friend has a Samsung GT-S6102 and he tried to flash a custom firmware without pre-rooting the phone. The phone was stuck in bootloop and he gave the phone to me for repair because I have been flashing phones like my Xperia mini pro and Samsung Monte, etc.
However, this is the first time I had to use Odin to do something like this. As per my experience so far, the most difficult part is to find the right firmware for this phone (I require the Indian firmware). So, after lots of brainstorming in the XDA forum I flashed these files (a) BOOT_S5360DDKK1_REV05.tar (b) torino_1205.pit (c) PDA, Phone and CSC files from S6102_DDMC1_ODDMB1_DDMC1. Now after successfully completing the flash process the phone still goes to bootloop and the Samsung Galaxy logo appears upside down (mirror image). I am attaching the screenshot here for your reference. Moreover, I cannot view the download mode because of white screen when I press volume down+home+power keys. But I can still reflash following the steps as it would if it was normal.
Here's the odin flash log.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S6102_DDMC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_S6102_DDMC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_S6102_ODDMB1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> BcmBoot.img
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.img
<ID:0/008> param.lfs
<ID:0/008> system.img
<ID:0/008> userdata.img
<ID:0/008> BcmCP.img
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response from boot-loader
<ID:0/008> csc.rfs
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Any help would be greatly appreciated. Please note that this phone is not rooted so can't go to CWM either.

So, frustrating... somebody got to have a way to revive this bricked phone.
Can somebody tell me how to root and to flash a custom kernel on an already bricked phone.....?

From the screenshot it shows that the odin version is not correct (Its for galaxy grand)
Try using Odin 3v1.8
For firmwares
Go here
Sent by typing by my fingers

@AMIT
Thank you very much for your reply Amit but I'm afraid that it's not going to work either. I've also used the older version of odin the one that you mentioned but with no luck. My only chances are if I can somehow alter the root permission and flash a custom kernel and then flash a new rom. However, I've searched many forums but nobody knows anything about rooting an already bricked phone.
It's quite easy otherwise to root a phone that's in a working condition. So sad...
Anyways, thanks a lot buddy....

Withe Screen on GT-S6102
Hello people
I'need a little help
I was trying to apply a monster rom to my girlfriend galaxy y duos.
Then it reboot and I could see the Monster boot animation but with the picture all mess up.
Then I enter in to Recovery mode an the menu was also mess up.
finaly I could enter with the odin 3 an flash the CSC_S5360_ODDLK1 pack (3 files)
then After reboot all I have is a with screen.
I can go in recovery menu or download menu, at least that I see, because all I see is a the withe screen
Can somebody help to riveve this brick
Thanks