Hi,
I just bought the Desire S and it comes with an 8GB SD card. When I plug my phone into the computer to browse the SD card, the SD card doesn't show up in My Computer. I've tried USB storage ON and OFF, debugging Mode and nothing works.
When I go to Computer Management -> Disk Management, the SD card shows up as "Unallocated". I cannot assign a drive letter to it as well.
I took the SD card out of the phone and plugged it into the computer using a card reader and it showed up in My Computer and was working fine. I put it back into the phone and plugged the phone to the computer and selected SD card storage option on the phone and I can't browse the SD card any more.
I've already formatted the card as FAT32 using Windows 7 before putting it into the phone.
I can browse the SD card just fine using a file explorer on the phone.
What could be the problem? why isn't the SD card showing up when I plug the phone into the computer?
I'm running MIUI 1.9.30 ROM, but the problem was also present with the original HTC ROM as well.
maybe you should try to format it through phone's settings, even better if you try to use a sense rom
Do you have htc usb drivers on your pc? Not sure if this they are required to browse the sdcard whilst in the phone, but they maybe?
The best you can do, you must format your SD card (all partitions) with your recovery (Ext3 or Ext4).
If you have used 4EXTRecovery or CWM, it's easier. (I prefer 4EXTRecovery )
At the end I think it will be ok
chris5s said:
Do you have htc usb drivers on your pc? Not sure if this they are required to browse the sdcard whilst in the phone, but they maybe?
Click to expand...
Click to collapse
I downloaded the "HTC Sync" tool and installed it but it doesn't recognize the phone probably because MIUI is installed on the phone.
Does anyone else have MIUI installed and managed to get it to work? Or is there some USB drivers I need to install?
philos64 said:
The best you can do, you must format your SD card (all partitions) with your recovery (Ext3 or Ext4).
If you have used 4EXTRecovery or CWM, it's easier. (I prefer 4EXTRecovery )
At the end I think it will be ok
Click to expand...
Click to collapse
But Windows doesn't recognize Ext3 or Ext4, so I still won't be able to browse my SD card on the computer.
456456 said:
But Windows doesn't recognize Ext3 or Ext4, so I still won't be able to browse my SD card on the computer.
Click to expand...
Click to collapse
Indeed, except if you use Droid Explorer on your PC (you can read all partitions from your phone with).
Except your SD partition who's must be in Fat32, all the parttions must be in Ext3 or Ext4.
That's why I'm write that's you can format your Sd card with your recovery.
For exemple, mine is:
System => ext4 => capacity :549 MB => free: 101MB
data => ext4 => capacity :1156 MB => free: 427MB
cache => ext4 => capacity :142 MB => free: 138MB
sd ext => ext4 => capacity :0 MB MB => free: 0 MB
sdcard => fat32 => capacity :29543 MB => free: 15369MB
In my pc, the only partition that I can read is sdcard
I tried Droid Explorer but it is buggy, incomplete, very slow, and overall crap.
I tried RCMix3D 1.5 ROM with Sense 3.5 and Android 2.3.5, and still the SD card doesn't show up on the computer. I have HTC Sync installed, but it crashes when I plug the phone in.
The SD card is formatted as FAT32.
Is there anything else I can do to browse the SD card on my PC? What did you guys do to get your SD card to show up on the PC for the first time?
Thanks for your help.
456456 said:
I tried Droid Explorer but it is buggy, incomplete, very slow, and overall crap.
I tried RCMix3D 1.5 ROM with Sense 3.5 and Android 2.3.5, and still the SD card doesn't show up on the computer. I have HTC Sync installed, but it crashes when I plug the phone in.
The SD card is formatted as FAT32.
Is there anything else I can do to browse the SD card on my PC? What did you guys do to get your SD card to show up on the PC for the first time?
Thanks for your help.
Click to expand...
Click to collapse
Some daft questions:
Did the SD function fine ever, eg with stock ROM when you first got the phone?
Have you tried an alternate SD card in the same phone?
Have you tried a different USB lead?
Have you tried on a different PC?
Have you tried another USB cabel?
Swyped from my Desire S
[Solved]
I found out what the problem was. After having a look at My computer -> Properties -> Device Manager, I found that two of the USB Controllers were not working properly and the SD card was detected as an "Unknown Device".
I uninstalled HTC Sync, fast boot drivers, and anything related to Android or HTC from my computer.
I then uninstalled the USB controller drivers by right-clicking on each and selecting Uninstall, and the same for the "Unknown Device". After a restart Windows started scanning for drivers for these devices and they started working perfectly again.
The SD card now shows up in My Computer when I plug the phone in, without the help of any HTC drivers.
I hope that helps others who come across this problem. Thanks to everyone who tried to help me with this problem. I appreciate your help guys.
i had that too.... i formatted it wiht my desire hd and it worked
Great to hear that this is resolved.
Best to edit your opening post #1 (using Advanced edit) and prefix the title of the post with [SOLVED] so as to note it's resolved.
Related
Hi
Just wondered how i completely wipe all my data from this disk?
I can boot into clockworkmod restore factory defaults and clear cache. I just need to know how to wipe the SD card.
Trying to revert the phone to the beginning.
Sent from my HTC Desire HD using XDA App
Settings/ sd card/ unmount sd/ format sd card!...
Sent from my HTC Vision
This worked to some degree.
Once I unmounted it and erased the SD card I couldn't mount or format the card again :/. Nothing I did worked.
I tried formatting my SD card when connecting the phone to my windows laptop but couldn't do it either.
I have clockworkmod installed on my phone and think I have found a solution.
Keep your phone connected to your laptop. If you reboot into recovery on your phone and go to "mounts and storage menu", then "mount USB storage". On your windows platform it should popup something like "need to format this drive before you can access it". so I formatted the drive, fat32, allocated unit size 32kb, check "quick format". Start.
once it's done in windows, select in clockworkmod "format /sdcard" and then "mount /sdcard" and reboot.
It should work.
In case this helps you along the way - this program seems to come recommended for formatting SD cards.
http://www.sdcard.org/consumers/formatter/
Grant Barker said:
In case this helps you along the way - this program seems to come recommended for formatting SD cards.
http://www.sdcard.org/consumers/formatter/
Click to expand...
Click to collapse
I tried that a couple of days ago. Formatted my new 32GB microsdhc card fine. But XP Pro (with SP3) couldn't see it on my desktop so couldn't drop all my data onto it. In the end I formatted the card with my Nokia E71, mounted it as a 'disk' on the PC and all was fine.
(Didn't do it on the DHD 'cos I didn't want to tie it up for 7 hours copying all my music across)!
Dave
II have ordered 16 GB card and what steps should I follow to move my 8 GB stock SD apps to new one?
1) Format new card............
2) ..................
3)
Cant u just connect it to the PC in USB mode and format from windows?
in reference to wiping SD cards, i want to know if i can format my sd card or is CWM, CM or anything else has essential files on the SD card (i dont install apps to the SD)
thanks
eozen81 said:
II have ordered 16 GB card and what steps should I follow to move my 8 GB stock SD apps to new one?
1) Format new card............
2) ..................
3)
Click to expand...
Click to collapse
1) Format new card............
2) Copy everything from old card to PC
3) Copy everything from PC to new card
If your PC environment is Windows based, you may want to think about using SyncBack Freeware. It will ensure that every file has been moved. I've been using this to move large folders/directories for many years.
to lee droid hello.
i am a "silent admirer". i have a rooted desire and i use only leedroid roms for more then a year. as always i never had any problems with any of the roms and install them all without wipe at all.
about a month ago i installes v. 2.3.
today i saw the thread about the new version 3.0 gb and downloaded the following files: 1. 3.0 gb leedroid rom.
2. the new radio ...56....
3. the ext3 file.
after downloading i checked the md5 of the first two files and found it OK.
i backed up my 16 gb sd and tried to install the 3.0 tom via rom manager.
the thing is that i believe that the rom was install OK but the rom did not go up and my desire got stuck with the dumb green "htc".
thereafter i restored the system which went well and tried again - this time with file and cach wipe.
again - all seems to go well but did not load.
tried to install the ext3 file - went ok but did not load.
from that moment i got really worried but nothing i tried (deleating the sd card and copying from backup) or thought i know didnt work and now i am the proud owner of stupid green "htc" screen.
please help
erezinna
p.s. i couldt read all the 53 pages of your thread so if anybody already got an answer - please send me there.
I had this same issue.
It seems that although I originally partitioned my SD card as ext3 at some point without me knowing the partition got changed to ext4 I really can't explain how as I never messed with partitions after I initially set them up.
if the EXT3 fix is not working for you try booting into gparted and checking the partition there. as soon as I did that and realized it had been changed to ext4 I deleted the partition and made a new ext3 patition and it worked flawlessly after that.
"try booting into gparted and checking the partition there"
where? when? who?
can you you be more gentle? i booted milion times and never heard of "gpart" (it is a secret socaity)?
it's a live cd that you boot into on your PC to partition the SD card with a ext3 partition.
just google gparted live cd
You need to verify that the second partition on your sd card is in fact ext3 or leedriod will not load
i have to burn it or ghost-burn it or just download it and transfer to my desire?
like i said in my previous post you need to boot into on your PC.
I have to ask how did you originaly partition your SD card?
dear larkspeed:
i did all you have suggested but the gparted (or the regular win 7) was unable to recognize the sd card at all.
i did recognize all the other harddisks on my computer. it is probably because of the ext4 and now i cannot delete it. (also i hardly can operate the phone - only basic functions).
what sould i do now?
Windows will not see ext4 at all but it will see the partition itself so you can delete and remake it.
Gparted should have seen it just fine and let you reformat it to ext3
However if neither windows or gparted can see the partitions on the card then it's very possible the card itself has a fault.
Stupid question but when you loaded gparted you did use the drop down in the upper right corner of the window to actually select your sd card right?
if not then you were looking at primary hard drive only
yes i did several times. you have to move with "tab" and keboard because the mouse does not work there.
if the sd card have a fault, should i format it or erase it totally or something?
if you are totaly sure you have a ext partition on that card you will need to delete that partition either with windows **** manager or gparted
if you just format the card it will only format the partition it can see which will be the fat32 partition.
Now I assume you are putting the micro sd into some kind of adapter to plug it into the PC.
Now I have 2 options for this a USB stick that the micro sd plugs into or a micro sd to sd adapter plugged into an internal card reader which plugs into a USB header on my motherboard.
both of these systems work fine for me.
if gparted is not seeing the card at all then I would think whatever system you are using to plug the card into your PC is not supported.
I have to ask when you plug the card in when in windows what size does it say the "removable drive" is?
1. i gparted the sd card into main fat 32 partition about 12 gb and 1.6 gb ext3 partition
2. i cloesd the program after compleating that and the device informed me that the sd card is damaged and needs formating
3. i formated it and moved the leedroid 3.0.
4. it refused to go into recovery because lacking .update.zip file so i copied that too.
5. i installed the 3.0 but i won't go.
6. what to do? give it up?
all I can suggest is to try a different SD card and see if it works then.
Well, after getting a blue screen on my PC I then tried what most suggested: DELETE/UNINSTALL any LG driver and re-plug phone to install drivers again.
I went to uninstall programs and got rid of the LG driver there, then plugged my phone up and apparently installed two out of three files successfully. I rebooted my pc and now I plug my phone to it and two things:
1. My computer does not see the sdcard
2. My phone does not see my sd card
When I try to go with phone file manager to SD card it says.... SD card not mounted.
What to do now?
Is it mounted in the Settings > Sd card & Storage menu?
Nope...
I'm running cm7 and in the storage menu there are 3 breaks:
the first one for the SD card, second one for internal and third one to show you how much space is left in the SD card...
Well, in the 1st slot there is not card mounted but in the last one it does show how much space is left/used.... very weird if you ask me!
I will check if the sdcard is not bricked now with a sdcard reader...
well, I think the SDcard is bricked.... I put in the SD reader and connected to my pc and it is not being recognized!
UPDATE: Bought a new sdcard and I still can't mount my card to the pc? WTF!!
wIIse said:
UPDATE: Bought a new sdcard and I still can't mount my card to the pc? WTF!!
Click to expand...
Click to collapse
Have you reinstalled the LG drivers? Your PC cannot access even the SD card without those drivers.
This is why, once I upgraded past G1, I decided to not root anymore. 2.2 with a strong phone works great. I focus on being a "power user" and not a modder because, quite frankly, it takes way too much effort and the risk of messing up my phone is too great. I just don't understanding stepping out on that ice all the time, when the phone works so well without modding it beyond the user experience.
download from LG site
Hi,
Have you tried downloading and installing the latest drivers from LG website?
I couldn't connect to SD at first until I used the downloaded drivers.
No problems anymore here.
grtz,
Pfeffa-rah
UPDATE: I have went back to eagleblood's rom and now I am able to mount my internal and external sdcards to my pc *HAPPY*
I plan on going back to CM7 and hopefully I am able to mount the cards again without the BSOD!
UPDATE: as stated earlier... I went back to CM7 and now all my f'ng drivers are messed up again...not able to mount/unmount SDcard!!
CM7 should look into this.
I have a faves pad 10.1 model yx10a03, and i'm having trouble with storage.
When I go to settings and storage it says I have total space 0.00, even with an 8gb msd card installed. so I'm thinking the tab has lost all its mount points.
I have tried 6 different micro sd cards as well and none of them seem to be recognized, I get a message " preparing sd card then nothing registers.
What do I do? I can get apps to install , but anything that needs more space like google earth etc fails during install.
Some one help...I can't find a firmware update or a custom rom from anywhere.
Iv'e tried factory data reset, no joy. I need a total system reset but not sure how.
Scott
When you connect to your computer or using something like Astro can you see or navigate to the "external" memory card drive?
If I connect it without a Micro sd card inserted I get nothing.
But if I connect the pad to my P.C via usb cable with a Micro sd card in it, it registers as external 8gb drive which I can send files to etc.
If I use astro, it sees that the sd card as a mount but nothing inside. Also doesn't show any size or storage available.
I could do with rooting method and put a custom rom on it but can't find anything about it.
theyam_yam said:
If I connect it without a Micro sd card inserted I get nothing.
Click to expand...
Click to collapse
Phone/Tablet inits the device but it's OS (drivers?) can't read the format.
But if I connect the pad to my P.C via usb cable with a Micro sd card in it, it registers as external 8gb drive which I can send files to etc.
Click to expand...
Click to collapse
PC recognized the mounted initialized device and can R/W to the (fat32?) format.
If I use astro, it sees that the sd card as a mount but nothing inside. Also doesn't show any size or storage available.
Click to expand...
Click to collapse
Astro (AFAIK) ques the device's I/O system for file spec and info. It (again AFAIK) just sends commands through the Tablet's OS. Kinda like running LS might in IRIX or some other unix.
I could do with rooting method and put a custom rom on it but can't find anything about it.
Click to expand...
Click to collapse
I have no idea and I'm a total n00b but... I wonder if the Tablet uses a proprietary/virtual FS on the SD card instead of the direct embedded card driver?
Is there anything in the instructions about formatting the card? Did you try to format the card in the tablet yet?
So this would be like when I format an SD card on my Mac... It can no longer be read by any other device until it's re-formatted by a non-mac device... But if mounted by said external device acting as a "card-reader" then the connected Mac can perform I/O normally. Only in this case your tablet is like the mac in that situation. Errr, if that made any sense.
Anyway, try to format the card on your tablet and see if that works.
So I had this 8gb micro Sdcard that came with my phone and for Christmas I got a 16gb one. I had a lot of precious stuff on the older 8gb, so I put it into an adapter and connected it to my PC, planning to backup the contents and then put it on the 16gb. But when i connected it in, it said "This card needs to be formated before using". I first i thought the adapter was broken, so I put the micro sdcard back into my android phone so I could connect my phone to the computer and do it that way but when it turned on it said "Sdcard ready to remove". The phone wouldn't recognise it either!
I have already put other micro sdcards in the adapter and they work perfectly.
I have a lot of precious stuff on the micro sdcard so if there is a way to fix it without wiping everything, I'd be really happy to hear it.
Will give the person who answered best thanks in all of their last 15 posts.
Maybe try disk manager on your PC and see what format is says the card is..
otherwise try the phone again and again hopefully it will work. Ive had that before and a combination of playing with disk manager and the phone I managed to get the stuff off my card
Nooby Arc S User said:
So I had this 8gb micro Sdcard that came with my phone and for Christmas I got a 16gb one. I had a lot of precious stuff on the older 8gb, so I put it into an adapter and connected it to my PC, planning to backup the contents and then put it on the 16gb. But when i connected it in, it said "This card needs to be formated before using". I first i thought the adapter was broken, so I put the micro sdcard back into my android phone so I could connect my phone to the computer and do it that way but when it turned on it said "Sdcard ready to remove". The phone wouldn't recognise it either!
I have already put other micro sdcards in the adapter and they work perfectly.
I have a lot of precious stuff on the micro sdcard so if there is a way to fix it without wiping everything, I'd be really happy to hear it.
Will give the person who answered best thanks in all of their last 15 posts.
Click to expand...
Click to collapse
i would try inserting it into your phone several times to try to get it to catch..also reboot phone while card is inserted..if you have to format the card you can still get everything off of it by using a program like "recuva" .. ive used it many times and it works like a charm..nothing is ever erased on a sd card..its only overwritten..so as long as you havent overwritten anything on the card you can easily get it back..formatting will not overwrite anything
Connect your card to pc, open mini partition tool wizard. Click on your memory in program and next open.
I tried putting the sdcard back into my phone several times and always didn't work . I went onto diskmanager and see screenshot below for info (it's g/ drive). I then tried formatting with various settings and always got a failure see second screenshot.
http://s6.postimage.org/bn9mepk01/New_Bitmap_Image.png
http://s6.postimage.org/jvg5dg1a9/New_Bitmap_Image_2.png
Format exfat next fat32. BUT first try use http://download.cnet.com/MiniTool-Partition-Wizard-Home-Edition/3000-2094_4-10962200.html,Install and open with this program your sd. I had this same problem, i opened sd in partition manager and i didn`t have to format. Do you have ex or swap partition on this card?
sonymanw said:
Format exfat next fat32. BUT first try use http://download.cnet.com/MiniTool-Partition-Wizard-Home-Edition/3000-2094_4-10962200.html,Install and open with this program your sd. I had this same problem, i opened sd in partition manager and i didn`t have to format. Do you have ex or swap partition on this card?
Click to expand...
Click to collapse
very handy tool,thanks for posting that.
sonymanw said:
Format exfat next fat32. BUT first try use http://download.cnet.com/MiniTool-Partition-Wizard-Home-Edition/3000-2094_4-10962200.html,Install and open with this program your sd. I had this same problem, i opened sd in partition manager and i didn`t have to format. Do you have ex or swap partition on this card?
Click to expand...
Click to collapse
Hey. Thanks for the reply, I installed that program but it confuses me. How do i access my sdcard with it?
My sdcard is not partitioned or used for swap or anything.
Oh and I've tried formatting with exfat, fat, fat32 and NFTS and always fails
Do you see your sd card in this program? If yes try wipe volume
I checked your screens and your card is RAW- file system is broken or is unknown to the windows , try this:
1
close ALL your programs, insert your sd card to your computer and ONLY WAIT,(15 min.) do nothing, dont touch mouse (weird? yes but your computer will try to repair file system, fot 2gb is less 5-10 minutes, but your is 8 gb class???, that wait more)
2 (optional, but you should try 3 point)
Format your sd with windows installerr (format it during window installation using windows setup disc) you can cancell instalation after format without probles
3
If still nothing (after 25 minutes) try this program http://panasonic.jp/support/global/cs/sd/download/index.html - IT IS LAST OPTION WITHOUT SPEND MONEY
Tell me if it worked.