Related
So i just followed the guide. I am happy to say that i just successfully rooted my phone. Took me a few tries but finally was able to do it.
So now what? I am down to GB 2.2 and now have to figure out how to get to GB 2.3.
In terms of ROMS what can i use to make sure not to brick my phone and do i just install them on my sdcard and use clockworkrecovery to load them or do i have to install them to romzip and use Ace Hack It.
Thanks guys for your support in development. I am looking forward to using a rooted Andriod.
This thread would probably be better off in Q&A, but at any rate. Yes you just put the zip for the rom on your sd card and flash it with CWM, no need to use the hack kit. Any ROM in the dev section should work well for you without bricking your phone. It's just a matter of what you want from your ROM.
Welcome, new rooted user
There are a few GB ROMs out there and here are a few located in the Dev section...
Leedroid
Coredroid
Android Revolution
All are quick and stable it is just personal preference on what you want. Simply download the ROM to your computer and place it on the root of your SD card, and then boot into clockwork and wipe your device clean...
1. Factory Reset
2 Advanced-Wipe dalvik cache
3. Install from sd card and choose your ROM
Very simple if you have any other question feel free to ask.
CHeck this video out
http://www.youtube.com/watch?v=A9yrg9W6X9U
thanks a ton for that video! made me 100% comfortable flashing my first rom
Sent from my Desire HD using XDA App
If you want a rom that looks stock but runs great, I would recommend rum runner. Also, welcome to the addiction. I flash a new rom at least once a week.
Sent from my Inspire 4G using Tapatalk
I've tried a bunch of different roms, and the one I like the most as of now is CoreDroid V8.1
Back when i first rooted my phone I tried ARHD, Leedroid, and a few others and stuck with ARHD until I ran upon CM7. Started with the nightlies because they were the only ones that could run Netflix at the time and have been stuck on CM7 since.
Try a few and figure out the style you want (stock looking or AOSP) because themes can be done for all of them.
I'm on cm7, and love it.. I can now tether, and be a hot spot without changing my plan...
Sent by my CyanogenMod 7
Add Ninja to a list of ROMS to try as well, very stable, fast and good on the battery.
If you wan to jump from 2.2 to 3.5, I'd recommend RCMix3D Runny.
Hello,
Ever since the latest update from HTC to Desire S I have been thinking about unlocking, rooting and flashing custom a ROM into my Desire S. I have been reading in this forum to get information if its possible after the last update and also if it would be worth it. It would seem that the easiest way is to unlock the bootloader with HTCdev.com and then continue with the backup and flashing of a new ROM. Can anyone confirm this method?
I've of course heard the arguments that the custom ROMs use less battery and are more stable but when I read through the forum I always manage to find people having problems with connectivity and battery life, even in the latest CyanogenMod ROMs. This makes me a bit hesitant to make the step into a life of custom ROMs since I dont want to get there and realising that my original phone worked better. So can someone confirm that they custom ROMs actually are better in any of the following critera:
- Stability
- Speed
- Battery efficiency
Secondly I would like some tips about good ROMs for the Desire S. Of what I've managed to find out CynaogenMod seems like a good choice. MIUI seems to look to much like iOS for my taste. And I'm not sure that I want or need a Sense ROM, I am currently having a hard time figuring out why sense is something I should use. How stable are the latest Sense 3.5 ROMs vs. CynaogenMod?
I will be very grateful for any thoughts and tips, especially if you are a noob like me. I have only ever jailbroken an iPhone 3G and that process was extremely easy and seems to differ quite a bit from unlocking, rooting and flashing an Android phone.
Thanks,
Andreas
edit: Is there any big difference between the nightly build and the "stable" build of CynaogenMod?
thebiffman said:
Hello,
Ever since the latest update from HTC to Desire S I have been thinking about unlocking, rooting and flashing custom a ROM into my Desire S. I have been reading in this forum to get information if its possible after the last update and also if it would be worth it. It would seem that the easiest way is to unlock the bootloader with HTCdev.com and then continue with the backup and flashing of a new ROM. Can anyone confirm this method?
I've of course heard the arguments that the custom ROMs use less battery and are more stable but when I read through the forum I always manage to find people having problems with connectivity and battery life, even in the latest CyanogenMod ROMs. This makes me a bit hesitant to make the step into a life of custom ROMs since I dont want to get there and realising that my original phone worked better. So can someone confirm that they custom ROMs actually are better in any of the following critera:
- Stability
- Speed
- Battery efficiency
Secondly I would like some tips about good ROMs for the Desire S. Of what I've managed to find out CynaogenMod seems like a good choice. MIUI seems to look to much like iOS for my taste. And I'm not sure that I want or need a Sense ROM, I am currently having a hard time figuring out why sense is something I should use. How stable are the latest Sense 3.5 ROMs vs. CynaogenMod?
I will be very grateful for any thoughts and tips, especially if you are a noob like me. I have only ever jailbroken an iPhone 3G and that process was extremely easy and seems to differ quite a bit from unlocking, rooting and flashing an Android phone.
Thanks,
Andreas
edit: Is there any big difference between the nightly build and the "stable" build of CynaogenMod?
Click to expand...
Click to collapse
The best advice I can give you is, try it yourself
After unlocking the bootloader and flashing a custom recovery, you can backup your current rom, to revert back to it whenever you want.
Most (if not even all) custom roms are faster and have a lighter battery consumption then the stock. The stability depends on how "fresh" a rom is. But all 3 creteria are not carved in stone, battery drain is often deppending on which user you are. As poweruser you won't see much difference, cause the battery cosumption advantage is at idle.
Stability is in most common more or less only depending on the rom, but if you use root apps in beta or alpha state there also can be freezes or reboots.
When it comes to speed, the question is, do you want to overclock it or maybe underclock,...
You see there are many possibilities^^
I personaly like cyanogen most, it's fast, stable and has no bloat, but it's not as eyecandy as sense and the standard apps are unfortunatly not as handy as the sense ones, but there are many replacments at the market^^
The difference between Stable and nightly is that the stable release is tested, the nightly rolls out almost every day and is build by an bot. They are released after building it, the tests for them are made by people like me who want to have the latest source with latest features^^
Regards
EDIT:
Maybe this [GUIDE] Complete tutorial for beginners... and this [GUIDE] Maximum Battery - Maximizing your battery life with CM7 ROM could be interesting for you, also take a look at the [INDEX][02 NOV 11] ROMS/RECOVERY/ROOT/HBOOT/RADIOS/TWEAKS/GUIDES/etc thread.
Have to agree with Tectas there... there is no perfect ROM. If there was, everybody would be using the same ROM and there wouldn't be so many different ROMs out there. Your personal opinion about a ROM will bias you towards it eventually, but to get to that stage you have to try out a couple of different platforms to allow you to make a mental picture of what you want in a ROM and which ROMs give you that...
If you want suggestions, then you should try out at least 5 categories of ROMs:
1. AOSP : Stock gingerbread. Vanilla UI. No bells and whistles, just the OS the way google built it.
2. CyanogenMod. No introductions required here. Google is your friend. (And YouTube)
3. MIUI (its looks very different from both the other builds, but you can skin it to death and it has a pretty big fan community behind it). Minus all the bloatware, fast and good battery life...and possibly the best stock music player of the lot - except maybe the Sense 3.5 player with beats audio(untouched).
Again, personal tastes - apples and oranges.
4. Sense 3 Official ported ROMs : Most popular ones currently are by Lowveld and Proxuser, tweaked to perfection. Stock pre-rooted ROMs are also available, but then there's nothing custom about them. Excellent lockscreen, beautiful animations and transitions, smooth UI and groundbreaking social network integration throughout the OS. The most functional, bug free and battery friendly one is Hyperion. (personal opinion). Added bonus is that the customer support is awesome!! (general opinion)
5. Sense 3.5 Official ported ROMs : The latest addition to our phone, skimmed off the newer HTC devices like the Sensation XL (aka Runnymede) and Bliss. These are the best looking (subjective) and have amazing functionality and built in widgets. The most notable here, with absolutely no issues at all is the Endymion ROM, by lowveld. Proxuser also has a Runny port for the Desire S, but there are unresolved issues on that one. Prox is a great developer and i'm sure he'll come around to solving them soon.
Why you would buy a HTC phone if you don't want Sense is something that completely eludes my tiny brain. But for those that want a non-sense ROM (has a ring to it, doesn't it) there's AOSP, and MIUI, Cyanogen. In the Sense corner, are the Official HTC ROM ports, both Sense 3 and 3.5.
You'll have to try them out on your own to see what tickles you in the right way...
DISCLAIMER: I am human. I have opinions. They may be wrong.
I have answered this question at length for the benefit of those looking for opinions, and speaking the universal truth is beyond my capabilities. So please don't be offended by any comments about any ROMs above. In their own little way, each is a little better than the other. It's called choice. We all have it... (Well, at least the ROOTED ones!! )
EDIT: Info corrected. Thanks to Tectas.
enigmaamit said:
Why you would buy a HTC phone if you don't want Sense is something that completely eludes my tiny brain. But for those that want a non-sense ROM (has a ring to it, doesn't it) there's AOSP, and MIUI. In the Sense corner, are CyanogenMod, and the Official HTC ROM ports, both Sense 3 and 3.5.
Click to expand...
Click to collapse
Sry, but cyanogen got nothing to do with sense, it's pure aosp
And why someone uses it, cause it's damn fast and the first official place to get updates or are there any sense roms with gingerbread 2.3.7 ?
And you can also set the hell out of it.
Ah and btw miui is based on cyanogen
Swyped from my HTC Desire S
Tectas said:
Sry, but cyanogen got nothing to do with sense, it's pure aosp
And why someone uses it, cause it's damn fast and the first official place to get updates or are there any sense roms with gingerbread 2.3.7 ?
And you can also set the hell out of it.
Ah and btw miui is based on cyanogen
Swyped from my HTC Desire S
Click to expand...
Click to collapse
Thank you Tectas. Post edited.
Like i said. Opinions... i could be wrong.
enigmaamit said:
Why you would buy a HTC phone if you don't want Sense is something that completely eludes my tiny brain. But for those that want a non-sense ROM (has a ring to it, doesn't it) there's AOSP, and MIUI, Cyanogen. In the Sense corner, are the Official HTC ROM ports, both Sense 3 and 3.5.
Click to expand...
Click to collapse
Because HTC have the best build quality and they're damn sexy
Thanks all for the answers. I have now tried to flash a custom ROM, the stable version of CynaogenMod to be more precise.
I say "tried" since it didnt work. I managed to unlock the bootloader with HTCDev.com. I also managed to install Clockworkmod and root the phone. And made a backup. And it all worked. But when I installed the ROM I got stuck on the HTC logo. So I restored the backup. And it worked.
So Im happy that the phone works but Im irritated that I couldn't install the ROM. I read something about HTCDev not unlocking kernel, only system partition, can that be the case? I will just make a list of all the steps I have taken and maybe someone can help me figure out what I did wrong =)
1. Unlock bootloader with HTCDev. It says unlocked. I still have HBOOT 2.00.0002. Is that a problem?
2. Used fastboot to install ClockworkMod. Worked great.
3. Used ClockworkMod recovery to install SuperUser I believe its called. The icon showed up in the apps drawer.
4. Used ClockworkMod "install zip from sd card" to install the CynaogenMod zip. Like described on CynMods wiki. No error that I remember.
5. Reboot and stuck on HTC logo. Does not show up when using "adb devices" and charging light does not light up when connecting the phone to the charger.
6. Press and hold Volume up + Volume Down + Power to reboot/shutdown phone and pulled battery when it went black.
7. Power down + Power to boot into recovery. Restore backup.
8. Rooted again since backup was taken before root. Superuser is back in the app drawer.
9. Wut should I dooo? =)
Thanks for any help. Its hard to find the right answers sometimes even using google and forums search.
edit: HTC seems to make pretty solid and affordable phones. With a UI thats at least okey. Thats why I bought it =) But Im a tech guy and likes to try new things (and also hates that skins does not work on latest Desire S update) so now Im venturing into the dark lands of custom ROMs... =))
When toy flash a new ROM you have to wipe data and cache. Especially when the ROM is as different as the cyanogen from the previous one
Swyped from my HTC Desire S
I have wiped Data and Cache. I have not touched the "dalvik cache" or whatever it is called.
This is the text I followed:
"Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
Select Choose zip from sdcard.
Select the CyanogenMod update.zip."
It would seem that the HTCDev.com unlock is not as good as the revolutionary version... Seems a couple of other guys have had the same problem.
Dalvik is the virtual machine where the Android apps run in.
Ok, damn. Sry I have no experience with the the htcdev unlocking procedure, I used xtc-clip, cause when I got mine there even were no possibility to unlock with revolutionary^^ Maybe try revolutionary or a custom sense ROM, but without the advantage of a custom kernel your experience could be the half.
Edit: I'm just wondering, cause only system can't be true, recovery has also it own partition.
Swyped from my HTC Desire S
The revolutionary method is not viable for me since I have HBOOT 2.<something> from the latest Desire S update. I tried a method from another trhead about EVO that was supposed to make flashing work after unlocking with HTCDev but with the same result: just showing the HTC logo. I am now restoring my backup again.
And I dont really know if I should clear dalvik cache since the guides dont mention that.
The tip I tried was in this thread:
http://forum.xda-developers.com/showpost.php?p=17219728&postcount=292
You can downgrade your hboot to use revolutionary, it works with htcdev unlocked, the thread is also somewhere here.
You can try to wipe Dalvik cache, but a cache wipe should also include that.
Edit: The downgrade guide is at the index thread i linked before
Swyped from my HTC Desire S
Tectas said:
You can downgrade your hboot to use revolutionary, it works with htcdev unlocked, the thread is also somewhere here.
You can try to wipe Dalvik cache, but a cache wipe should also include that.
Edit: The downgrade guide is at the index thread i linked before
Swyped from my HTC Desire S
Click to expand...
Click to collapse
May have to try that out, wouldn't feel right to give up this fast. Have a good backup ready Found the thread. Will check it out.
Thanks =)
edit: For anyone finding this thread with similar problems, the following thread is trying to figure it out:
http://forum.xda-developers.com/showthread.php?t=1330400&page=3
from what i read on the forum it seems that those with htc-dev unlock are having problems with flashing custom roms.
THIS might help
HTCDev.com unlock is not as good as the revolutionary ?
I have wiped Data and Cache. I have not touched the "dalvik cache" or whatever it is called.
This is the text I followed:
"Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
Select Choose zip from sdcard.
Select the CyanogenMod update.zip."
It would seem that the HTCDev.com unlock is not as good as the revolutionary version... Seems a couple of other guys have had the same problem.
Your Device Still S-On and you have to Get S-Off Procedure because HTCDev.com just unlock boot loader i believe
Edit Take A Look
Why is my security still on (S-On) after I have unlocked my bootloader?
Your device is shipped with Security on (S-ON) to protect your system software configuration (such as the bootloader, radio, boot, recovery, system and others). After you have unlocked the bootloader, however, you will have lifted the restrictions on boot, recovery and system. This means you can customize boot, recovery and system images on your phone as you desire. You can easily see that you have successfully unlocked the bootloader by looking at the top of the screen when entering the bootloader screen. Security is left on to protect things like the radio, and SIM lock.
i hope this helps You
Hi there, my friend is coming round soon and I was planning to give it a custom rom
Now, I've done this type of stuff before (on my nexus) I just want to see how you would do it for this samsung phone
Now, what recoveries can you get? I use 4EXT on mine
And, can anybody send me to a stable and up-to-date rom that can be used everyday and has nearly no issues? I need one without all the samsung stuff, just a normal default android one
And, how would I go by rooting the phone?
On mine, I used the zergrush exploit, does it work for this phone??
If you want one with everything working, then use the Froyo roms. CM7 is under development. The major bugs are bluetooth and youtube hq. Leaving that, even thats useable. It's even better than Froyo.
I suggest you to try either Kyorarom or Kyrillos v9.6. Both of them are froyo based, pre-rooted, and have other mods to make it even more faster than a stock one.
Happy flashing!
ak700 said:
If you want one with everything working, then use the Froyo roms. CM7 is under development. The major bugs are bluetooth and youtube hq. Leaving that, even thats useable. It's even better than Froyo.
I suggest you to try either Kyorarom or Kyrillos v9.6. Both of them are froyo based, pre-rooted, and have other mods to make it even more faster than a stock one.
Happy flashing!
Click to expand...
Click to collapse
Thanks, and how do I go about flashing the rom, would I have to root it first?
No need.
This is something to good to read http://forum.xda-developers.com/showthread.php?t=1372414
BTW to root the phone use super one click root (or sth like that )
Ah, I get it now, thanks
Just one more question, does ODIN delete the phones data before installing the rom?
You have to wipe all your data after flashing(or not if from Froyo to Froyo)
I mean from recovery. ODIN don't delete user data
I exactly I don't know the working of odin, but after flashing you are directly taken to the recovery and advised to wipe data and factory reset.
I have TWRP installed on my One X and fully backed up my current settings through the Backup function in TWRP as well as Titanium backup, just to be safe.
I want to install MIUI so I've downloaded the zip. Is the best method to wipe the phone and then install the zip, or is it to restore to factory settings and then install the zip?
Also, if I want to go back to my current rom (HTC Sense - that came with the phone) how would I restore the TWRP backup that was created? Also how solid is the TWRP backup? Will I have problems restoring from that with random things like market associations or settings?
Thanks for all the help everyone.
TWRP backups back up EVERYTING (I mean kernel, system, app apks) except for sdcard data. Restoring a backup will look exactly like the moment you backed up the ROM.
In order to flash a new ROM, do this:
1. Back up your apps using some application (Titanium Backup, Ultimate Backup, etc)
2. Create a new TWRP backup
3. Factory Reset
4. Install the ZIP
5. Boot into your ROM and download whatever app you downloaded in step 1
6. Restore your apps from step 1
Enjoy
im looking for a good rom as well but im new.
my att one x was on 1.85 before i rooted it and unlocked the bootloader.
now im just looking for a senseless rom like Jdroids or CM9 that will work with my situation.
id love to get jdroids exodized revoultion, does that work with att? or do i have to wait for an att version to come out?
any suggestions. thnx
veyg said:
im looking for a good rom as well but im new.
my att one x was on 1.85 before i rooted it and unlocked the bootloader.
now im just looking for a senseless rom like Jdroids or CM9 that will work with my situation.
id love to get jdroids exodized revoultion, does that work with att? or do i have to wait for an att version to come out?
any suggestions. thnx
Click to expand...
Click to collapse
Don't flash anything that isn't actually in our dev forum unless you want a buggy POS (best case), a massive bootloop (slightly worse case), a beautiful paperweight (pretty bad), or your phone exploding (yeah that's probably the worst).
I made that last one up, but who knows.
As for Sense-less roms, look for AOKP or CM9. CleamROM DE/Dev Edition is pretty much Sense-less, but it retains some backend Sense things to ensure everything still works properly. It's as close to AOSP as you're gonna get without actually being AOSP.
stnguyen09 said:
Don't flash anything that isn't actually in our dev forum unless you want a buggy POS (best case), a massive bootloop (slightly worse case), a beautiful paperweight (pretty bad), or your phone exploding (yeah that's probably the worst).
I made that last one up, but who knows.
As for Sense-less roms, look for AOKP or CM9. CleamROM DE/Dev Edition is pretty much Sense-less, but it retains some backend Sense things to ensure everything still works properly. It's as close to AOSP as you're gonna get without actually being AOSP.
Click to expand...
Click to collapse
Hello can you help me? i have a paper weight because i installed the wrong rom and i flashed it when i had 20% battery now y one x wont turn on or charge please help
mr.5106411 said:
Hello can you help me? i have a paper weight because i installed the wrong rom and i flashed it when i had 20% battery now y one x wont turn on or charge please help
Click to expand...
Click to collapse
Well there's another lesson in there. Don't flash unless you have sufficient battery (I never do it under 50%....best to do it when fully charged though)
So you're not getting the led indicator to light up when you plug it in? What rom did you flash?
Hi!
I flashed pac-rom but it keeps my phone awake 24hrs even when i am sleeping therefore 70% battery consumption when i am sleeping and everyday i have been posting in that thread for help or update but dev has left,and this was a stable version with never ending problems for me.So i want to remove this and see if the other rom also behaves like this or not.
I want to remove this rom and gapps as well but i am a newbie and never did this before.I will be really grateful if someone guide me step by step in this.
Please reply soon coz i am not able to live a normal life as battery is creating problems for me.Thanks a lot in advance
LG P500 rooted,pac-rom,aokp 4.2.2,stock kernel
Read the sticky thread!
Here it is.. http://forum.xda-developers.com/showthread.php?t=1152306
Sent from my LG-P500 using xda premium
I know that dear
kunnaliskinng said:
Read the sticky thread!
Here it is.. http://forum.xda-developers.com/showthread.php?t=1152306
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
As i said i am newbie things are not clear to me and what i asked in the question is not mentioned clearly and exactly.And since 7 days i am stuck in this esp last three days coz either the rom is a problem or need to be reflashed.And how to remove gapps etc that is not clear dear.Anyone who has a helping nature would write few lines or steps if he wants to help.My head is screwed up with this rom,nothing is working properly and all the time i am busy with my phone.Can't even open my eyes now as i have been continously looking at small screen.
Do not know if i have to reset the phone again or what,how to remove gapps as i do not have google store,gmail and maps in that. I always try to help a newbie coz i know he will not understand things clearly and can screw up,and in my case an experience person can tell if it is some thing else i should do along with that i.e if he would be concerned.
You are the king man so you would not know these small petty things.
Anyway thanks for whatever best you could do.
@kitu34: The procedure for flashing a new ROM is always the same:
1. Download the ROM, put it on your SD card (I recommend creating a folder in your SD card for your ROMs, kernels, etc., so that they're all in one place, but that's just a suggestion, not a requirement. Optional: Download the recommended GAPPS package for the ROM (if the ROM comes with built-in GAPPS, no need to download this).
2. Boot into recovery. You should be able to reboot into recovery simply by pressing power button > reboot > recovery. If not, then shutdown the phone and press & hold power+volume down+home.
3. In recovery, perform a factory reset (wipe data & cache), wipe dalvik-cache, and wipe system.
4. In recovery, flash the zip of the ROM you want to install (the procedure for this depends on your custom recovery; just browse around the menus for the option to flash a zip). If the ROM has a separate GAPPS package, you can also flash it here. Note: Always flash the GAPPS after you flash the ROM, not before.
5. Reboot system.
Flashing a custom kernel uses the same procedure, except you only wipe cache & dalvik-cache in step 3.
____________________
Sent from the moon.
____________________Sent from the moon.[/QUOTE]
Thanks.Ok it is exactly the same.And what if i just have to update the rom,in case i need?
(Two times thanks due to moon from a man just living on earth hhehehe)
Flashing a custom kernel uses the same procedure, except you only wipe cache & dalvik-cache in step 3.
____________________
Sent from the moon.[/QUOTE]
Just confused whether to reflash pac rom or flash either rashed's 10.1 or Jenkin's.Maybe first flashing went wrong coz i am having lots of problems and the phone is awake 24hrs.I want a good rom but battery friendly
kitu34 said:
Thanks.Ok it is exactly the same.And what if i just have to update the rom,in case i need?
(Two times thanks due to moon from a man just living on earth hhehehe)
Click to expand...
Click to collapse
Update the ROM? Do you mean flashing a newer version of the same ROM? Some ROMs can be updated by simply wiping cache, dalvik, & system (no need to wipe data), then flashing the new version. Personally, I advise doing a clean install every time when installing a new ROM, even if it's just an update. That means a full wipe: data, cache, dalvik-cache, & system. A clean install helps you avoid potential errors.
____________________
Sent from the moon.
Syd_M said:
Update the ROM? Do you mean flashing a newer version of the same ROM? Some ROMs can be updated by simply wiping cache, dalvik, & system (no need to wipe data), then flashing the new version. Personally, I advise doing a clean install every time when installing a new ROM, even if it's just an update. That means a full wipe: data, cache, dalvik-cache, & system. A clean install helps you avoid potential errors.
____________________
Sent from the moon.
Click to expand...
Click to collapse
Thanks a lot, but any advise on those three roms? and i need a stable one
kitu34 said:
Thanks a lot, but any advise on those three roms? and i need a stable one
Click to expand...
Click to collapse
If you want good battery life, then I suggest staying away from Jelly Bean ROMs for now -- the battery drain is huge. If you want to try a stable JB ROM, then the latest Jenkins build is good, as long as you don't mind battery drain and a couple of relatively major bugs (those being bluetooth A2DP not working and wifi hotspot reboot).
If you want a relatively more stable, but still high-end, ROM, then stick with ICS. Hephappy's CM9 is good (check the thread in the General LG-P500 forum), or if you want a tweaked & modded ICS, then get neko95's ICySNAP.
That said, the king of battery life still is Gingerbread. I'm personally using the latest unofficial CM7.2 build by FitAmp; it's stable and with good battery life, better than ICS or JB.
____________________
Sent from the moon.
Syd_M said:
If you want good battery life, then I suggest staying away from Jelly Bean ROMs for now -- the battery drain is huge. If you want to try a stable JB ROM, then the latest Jenkins build is good, as long as you don't mind battery drain and a couple of relatively major bugs (those being bluetooth A2DP not working and wifi hotspot reboot).
If you want a relatively more stable, but still high-end, ROM, then stick with ICS. Hephappy's CM9 is good (check the thread in the General LG-P500 forum), or if you want a tweaked & modded ICS, then get neko95's ICySNAP.
That said, the king of battery life still is Gingerbread. I'm personally using the latest unofficial CM7.2 build by FitAmp; it's stable and with good battery life, better than ICS or JB.
____________________
Sent from the moon.
Click to expand...
Click to collapse
ok then for now i will try jenkin's coz that was the first rom i downloaded on my pc but did not flash.actually i have serious battery and other issues that is why i am just getting rid of this now and then read about the roms you mentioned.after fashing i will tell you how it goes and if that also has a battery issue then the next...so kind of you to help as there are very few people here who really want to help.(the other day grgtm from cebu really helped me when my phone went in fastboot,cebu guys are damn good hehe)thanks a lot
4. In recovery, flash the zip of the ROM you want to install (the procedure for this depends on your custom recovery; just browse around the menus for the option to flash a zip). If the ROM has a separate GAPPS package, you can also flash it here. Note: Always flash the GAPPS after you flash the ROM, not before.
I am doing with jenkins as i already have but it does not have gapps as i am not flashing the very last update which has gapps with it.\So is it ok to use rashed's cm10's mini gapps?
kitu34 said:
I am doing with jenkins as i already have but it does not have gapps as i am not flashing the very last update which has gapps with it.\So is it ok to use rashed's cm10's mini gapps?
Click to expand...
Click to collapse
Yes, Rashed's mini gapps is for all cm10.x roms, including the Jenkins builds.
Edit: By the way, grgtm is from Romania, not Cebu (Philippines). You probably got him mixed up with someone else.
____________________
Sent from the moon.
Syd_M said:
Yes, Rashed's mini gapps is for all cm10.x roms, including the Jenkins builds.
Edit: By the way, grgtm is from Romania, not Cebu (Philippines). You probably got him mixed up with someone else.
____________________
Sent from the moon.
Click to expand...
Click to collapse
Hahaha you are right it was you who is from cebu and i was asking him if it is night time in phillipines then he told me he is from Romania.My mistake.
Ok listen i did that and just wanted to check but the home button is not responding,any ideas? Thanks
BUT WHEN SCREEN IS OFF I CAN WAKE UP WITH THE HOME BUTTON AND I DOWNLOADED WHATSAPP BUT THE USUAL NOTIFICATION IN THE NOTIFICATION BAR DID NOT COME.I think have to reflash again
kitu34 said:
Hahaha you are right it was you who is from cebu and i was asking him if it is night time in phillipines then he told me he is from Romania.My mistake.
Ok listen i did that and just wanted to check but the home button is not responding,any ideas? Thanks
BUT WHEN SCREEN IS OFF I CAN WAKE UP WITH THE HOME BUTTON AND I DOWNLOADED WHATSAPP BUT THE USUAL NOTIFICATION IN THE NOTIFICATION BAR DID NOT COME.I think have to reflash again
Click to expand...
Click to collapse
The home button not working is a result of a GAPPS error when the system partition is too full. You'll need to trim the ROM prior to flashing (search the cm10 thread; it's too complicated for me to explain here) or download the version of cm10.1 with built-in GAPPS. The fact of the matter is, our phones has a very small system partition, hence why we have to go to all this trouble when using JB.
____________________
Sent from the moon.
Syd_M said:
The home button not working is a result of a GAPPS error when the system partition is too full. You'll need to trim the ROM prior to flashing (search the cm10 thread; it's too complicated for me to explain here) or download the version of cm10.1 with built-in GAPPS. The fact of the matter is, our phones has a very small system partition, hence why we have to go to all this trouble when using JB.
____________________
Sent from the moon.
Click to expand...
Click to collapse
Thanks,but first i am trying to reflash coz in the first time i wiped even cache partition and now i will try without that coz i did not yet get an answer to how to trim
You're seriously going to need to learn how to help yourself, @kitu34. Instead of asking for step-by-step instructions all the time, try looking for them yourself; simply using the "search this thread" function and running a search for "trim" in Rashed's thread would give you what you need. In fact, here's the link to the program used to trim ROMs: http://forum.xda-developers.com/showpost.php?p=33349661 -- that link was in the first post of Rashed's thread, labeled (and in very big letters) CLICK ME. The instructions for using the program is also in the thread, and the program's interface is so simple that simply browsing around should tell you what to do.
____________________
Sent from the moon.
Syd_M said:
You're seriously going to need to learn how to help yourself, @kitu34. Instead of asking for step-by-step instructions all the time, try looking for them yourself; simply using the "search this thread" function and running a search for "trim" in Rashed's thread would give you what you need. In fact, here's the link to the program used to trim ROMs: http://forum.xda-developers.com/showpost.php?p=33349661 -- that link was in the first post of Rashed's thread, labeled (and in very big letters) CLICK ME. The instructions for using the program is also in the thread, and the program's interface is so simple that simply browsing around should tell you what to do.
____________________
Sent from the moon.
Click to expand...
Click to collapse
Thanks,i did search the thread by the relevant keywords but was not clear that i simply have to remove apps after flashing or before or what and the link you gave did not strike me would be for trimming.Now i know as someone told me to use titanium but the link i have not read fully but it is helpfull and will read now.Thanks again
Just for your info
kitu34 said:
Thanks,i did search the thread by the relevant keywords but was not clear that i simply have to remove apps after flashing or before or what and the link you gave did not strike me would be for trimming.Now i know as someone told me to use titanium but the link i have not read fully but it is helpfull and will read now.Thanks again
Click to expand...
Click to collapse
That link to the website is closed,i mean the website is closed.Bye
I tried Jenkins with rashed's mini gapps and worked perfectly(except battery drain), instead using an tool for rom editing, use an app like root uninstaller to get read of unnecessary apps to free some space on internal memory or use an d2ext script(but it got some strange behavior from my phone, you need a really fast sd card, an class 10 for that, and a reliable brand, mine is class 4, so in the final, sd card will worth half price of the phone)
grigtm said:
I tried Jenkins with rashed's mini gapps and worked perfectly(except battery drain), instead using an tool for rom editing, use an app like root uninstaller to get read of unnecessary apps to free some space on internal memory or use an d2ext script(but it got some strange behavior from my phone, you need a really fast sd card, an class 10 for that, and a reliable brand, mine is class 4, so in the final, sd card will worth half price of the phone)
Click to expand...
Click to collapse
Thanks,i have both titanium and es explorer,can i do with that by simply uninstalling system app? Actually someone told me not to this way and instead trim the rom.Even i am confused what is the difference.Either it creates problems or the amount of space we get by uninstalling with titanium is less compared to trimming the rom.
I will later what i did later.