Database Info

[KERNEL] Buzz SENSE for all ace devices 1.2ghz or 1.6ghz

Here is my kernel (over in the desire hd section) all works with inspire 4G on sense as well (audio + video)
1.22Ghz
1.6Ghz
Fetures :-
EXT4
CIFS
TUN
BFQ
CFS
External Speaker Audio Boost
Much More
If you have audio / video bugs it means the rom is using old libs ... wait for rom dev to update this
**********ANYONE WITH AUDIO + VIDEO ISSUES INSTALL THIS VIA CWM AND POST FEEDBACK PLEASE*****************

Apache14 said:
Here is my kernel (over in the desire hd section) all works with inspire 4G on sense as well (audio + video)
1.22Ghz
1.6Ghz
Click to expand...
Click to collapse
so would this work with cm and muiu?

Excellent. I assume I'd use setcpu to overclock?
Sent from my Desire HD using Tapatalk

not for CM but miui will work as far as i know
and yest set cpu

Thanks Apache!!!!

Cant wait to try this out. I thought DHD kernels didnt play so well with the inspire...can't wait. Sound + Video =

Sweet
Getting 2062 or more on Quadrant........ No issues yet! Great Apache thanks for bringing this over for us!!!
BTW using stock rooted rom.

well video still doesnt play well with DHD rom using this kernel. I think they must have different camera/video drivers or something. Its just weird that 2 phone with the same hardware dont 100% play well with each other software and driver wise. I can understand kernel differences but..

what rom are u using ? some are using old libs stock rooted sense should be fine also CM needs some more kernel work ....

also could someone please pull me /proc/config.gz ?
by
"adb pull /proc/config.gz"
and send it to me ? if there are issues they will be config wise

Apache14 said:
what rom are u using ? some are using old libs stock rooted sense should be fine also CM needs some more kernel work ....
Click to expand...
Click to collapse
latest revolution HD rom

yer mike has to update the libs bare with us

is there something I can get my hands on and update??

woo 53 linpack 2274 quadrant

How is the sound?

what OC speeds are you kids using?
my ex-captivate cant go higher than 1.28Gzh

Sound
The sound is fine for me. No tinny sound, same as I had before I flashed it.

r_3 said:
How is the sound?
Click to expand...
Click to collapse
Seems good for me!

Setcpu
Any suggestions on what profile to use for setcpu? First time using it and I want to get the most out of it.

netnerd said:
what OC speeds are you kids using?
my ex-captivate cant go higher than 1.28Gzh
Click to expand...
Click to collapse
I loaded the 1.6 but havent went over 1334 yet... baby steps

possible to root 3.1? - to overclock to 1.6ghz?

so i just got my asus TF and when i saw the 3.1 leaked i immediately updated..
but now i wanna try to run the supposed stable 1.6 overlock kernal
did i jump the gun? or is there still a way to root my android device and get this accomplished?

Jumped the gun. No custom kernels are compatible with the 3.1 update yet since they'll need to kernel source for it.

While no kernel yet. You should have root with old firmware than update to 3.1 with the rooted 3.1 rom. Custom kernel for 3.1 probably in a week or two max.

I'm using 3.1 right and have no reason to actually overclock. Once it's a available i'll do so but it's so smooth that there is no need.

b1ackplague said:
I'm using 3.1 right and have no reason to actually overclock. Once it's a available i'll do so but it's so smooth that there is no need.
Click to expand...
Click to collapse
ye, 3.1 is much more silky smooth than 1.4G @ 3.0

Hmmm, the only thing now is no cifs included...
Did anyone get this working ready? Was wondering if I could stream 720p mkv's now

And is the sleep of death back? It was fixed for me with the netformer custom kernel..

dagrim1 said:
Hmmm, the only thing now is no cifs included...
Did anyone get this working ready? Was wondering if I could stream 720p mkv's now
Click to expand...
Click to collapse
[INFO] Cifs on leaked 3.1
Mixed reports of it working.

[Q] A couple of questions about kernels

I'm on infused 2.2.3 and i currently have Entropy's daily kernel.
I have a few questions about changing it
1) i already know i can just flash over it but, i want a bit faster one, and i wanna try to do that oc stuff... a few things i dont understand from http://forum.xda-developers.com/showthread.php?t=1212485 is that it says only works on Samsung roms and not AOSP roms... firstly would i be ok being on infused? and also what does AOSP even mean?
2) I know it's a stupid question but what is a GB rom and what is the difference between it and other ones?
3)what is voodoo lagfix, voodoo sound and insecure boot?
I think that is all for now
Thanks for any help

First- yes you can flash that kernel with infused.
2nd- GB is gingerbread, its the lastest realses of android system (or soon will be for our infuse)
3rd- voodoo lagfix and sound are a tweek that helps your phone look ,run smoother, quicker, and sound better without a custom kernel but still works with everything.
Big dog Infuse I997 GB KJ4

bignate78 said:
First- yes you can flash that kernel with infused.
2nd- GB is gingerbread, its the lastest realses of android system (or soon will be for our infuse)
3rd- voodoo lagfix and sound are a tweek that helps your phone look ,run smoother, quicker, and sound better without a custom kernel but still works with everything.
Big dog Infuse I997 GB KJ4
Click to expand...
Click to collapse
Ok thanks for that... now which one should i download? Which zip do i download?

joeym11 said:
Ok thanks for that... now which one should i download? Which zip do i download?
Click to expand...
Click to collapse
in the thread you posted, you can pick any of them......Cores A and B just have different clock speeds added.
1.1 of course being the latest, but some have said they prefer 1.0. just flash it with SGS kernel flasher or CWM and you will be good. after doing so, go and get Voltage controller(free) or one of the paid apps(set cpu,Pimp My Cpu) and you will have the option to OC(Over Clock) and UV ( Under volt) that is all really.
no harm no foul, you should not mess anything up. try them out and see which one you like better. i personally liked 1.1 with the Infused Rom.

the2rrell said:
in the thread you posted, you can pick any of them......
1.1 of course being the latest, but some have said they prefer 1.0. just flash it with SGS kernel flasher or CWM and you will be good. after doing so, go and get Voltage controller(free) or one of the paid apps(set cpu,Pimp My Cpu) and you will have the option to OC(Over Clock) and UV ( Under volt) that is all really.
no harm no foul, you should not mess anything up. try them out and see which one you like better. i personally liked 1.1 with the Infused Rom.
Click to expand...
Click to collapse
But it says there's 2 builds to choose from... and there are 4 different downloads

joeym11 said:
But it says there's 2 builds to choose from... and there are 4 different downloads
Click to expand...
Click to collapse
Again
Four DLs
1.1
1.0
core a
core b
STAY away from the different cores, since your just begining with the kernel stuff. EITHER one of the first 2 will be ok for you bruh.

the2rrell said:
Again
Four DLs
1.1
1.0
core a
core b
STAY away from the different cores, since your just begining with the kernel stuff. EITHER one of the first 2 will be ok for you bruh.
Click to expand...
Click to collapse
Alright i think i just bricked it... I went with 1.0 and now it goes from the samsung creen to just a black screen with the 4 bottom buttons lit up, and finally just started up... what happened to the boot animation?
Oh and what should i set my OC to? Like what is a good speed or whatever?

joeym11 said:
Alright i think i just bricked it... I went with 1.0 and now it goes from the samsung creen to just a black screen with the 4 bottom buttons lit up, and finally just started up... what happened to the boot animation?
Oh and what should i set my OC to? Like what is a good speed or whatever?
Click to expand...
Click to collapse
when i was using it i had it stable at 1.6 on xinteractive.
may drain more battery, but thats what undervolting is for.
i dont recall anything about the boot animations.....just reboot again and see if happens again.

the2rrell said:
when i was using it i had it stable at 1.6 on xinteractive.
may drain more battery, but thats what undervolting is for.
i dont recall anything about the boot animations.....just reboot again and see if happens again.
Click to expand...
Click to collapse
How do i undervolt? and what should i undervolt to?

[KERNEL] AT&T Stock-ish 0.3 BLN/USB-OTG/NFS/FUSE/init.d/adb root/boot animation

This is a mostly stock AT&T kernel I've packaged up. Its features include the BLN patch, USB-OTG support and in-kernel NFS and FUSE modules. The ramdisk has been tweaked to support init.d scripts, adb as root and boot animations (on those ROMs that support it - such as my Alien ROM).
I've tried to keep any other changes to a minimum. There is no UV/OC patching, etc as this kernel along with Alien ROM already perform outstanding.
You can grab it here.
Version 0.2 with NLS UTF-8 support is here.
Version 0.3 based on the UCLA3 kernel is here. I recommend you use the UCLA3 modem from here.
If you want to revert to stock AT&T 2.3.6 UCKK1, you can get it here. Thanks to pookieguy for the stock files!
Source is here.

mardos said:
What about for Rogers?
Click to expand...
Click to collapse
Does this forum name start with Rogers?

ouch cold.....blooded.
will there possibly be a version for rogers devices? I know the difference between kernels is minimal. not sure if its negligible. Da G mentions it a bit in his thread.

Thank you sir. Downloading now
Sent from a Red Sonja'ed Sgh I727

romracer said:
Does this forum name start with Rogers?
Click to expand...
Click to collapse
It sure doesn't but definitely includes ROGERS ROMs so maybe the name should change smh
Sent from my SAMSUNG-SGH-I727 using XDA App

Danielk425 said:
Thank you sir. Downloading now
Sent from a Red Sonja'ed Sgh I727
Click to expand...
Click to collapse
Let me know how it works Dan, im still kernel Shy..........from the Force Close shot gun

mardos said:
your a dev and this is how you talk to people who ask simple questions?
Click to expand...
Click to collapse
no rom fo jooooo...!

the2rrell said:
Let me know how it works Dan, im still kernel Shy..........from the Force Close shot gun
Click to expand...
Click to collapse
Will do going to try it when I get home.
Sent from a Red Sonja'ed Sgh I727

Danielk425 said:
Will do going to try it when I get home.
Sent from a Red Sonja'ed Sgh I727
Click to expand...
Click to collapse
Ok so I decided not to wait and everything is silky smooth love not having to look at the stupid att splash screen. Good job romracer, thanks.
Sent from a Red Sonja'ed Sgh I727

Thanks rom racer downloading now. Usb otg is sweet

Very nice! Battery is juiced again! Thank you!
Sent from my SGH-I727 using XDA App

Oh...romracer.....what a beautiful job this is.
Even though I am accustom to zImage kernels and these are forign to me....I am no stranger to source. I have to say good job.
I am currently in the process of repacking a stock kernel, and am having a tremndous amount of trouble. I believe its my repacking scripts and methods....never the less, I am working on a rom release (without a device no less)
And with your permission I would be very pleased to include this kernel with the distrubtion.
May I?
Thanks
Sent from my SAMSUNG-SGH-I897 using Tapatalk

Johnsondr80 said:
Oh...romracer.....what a beautiful job this is.
Even though I am accustom to zImage kernels and these are forign to me....I am no stranger to source. I have to say good job.
I am currently in the process of repacking a stock kernel, and am having a tremndous amount of trouble. I believe its my repacking scripts and methods....never the less, I am working on a rom release (without a device no less)
And with your permission I would be very pleased to include this kernel with the distrubtion.
May I?
Thanks
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Click to expand...
Click to collapse
You may

Flash with cwm?
Sent from my SAMSUNG-SGH-I727 using xda premium

That's how I did it and it works well
Sent from my SAMSUNG-SGH-I727 using XDA App

How its battery life...will it work on skyrocketeer?
Sent via rooted SkyRocket

Battery life is the best I've seen. I'm running this on Skyrocketeer with the conservative governor set and the screen off frequency set at 192. Unlike Da_G's higher performance kernel, this one keeps the 2nd core offline until there is a heavy load, greatly increasing my battery life. I still get a 6400 score on CF-bench, while overclocked to 1.78 on Da_G's I get around 7800.

NM i got it.
Fast...

Will the boot animation support in this kernel allow me to flash a new animation to the rooted stock 2.3.6?
Sent from my SAMSUNG-SGH-I727 using XDA App

Just put a boot animation named sanim.zip in the system/media folder and it will work with this kernel.

[Q] MHL (TV out functionality) not working on Zeus?

My Infuse after being rooted and flashed Zeus 5.1 loses its MHL's functionality. I'm new to Infuse and Zeus so this might be an existing problem. Is there anyway we could get MHL working again?
Thanks, devs!

sipora said:
My Infuse after being rooted and flashed Zeus 5.1 loses its MHL's functionality. I'm new to Infuse and Zeus so this might be an existing problem. Is there anyway we could get MHL working again?
Thanks, devs!
Click to expand...
Click to collapse
MHL does Not work on any recent GB custom roms! This has been stated LONG time ago. Only works on froyo. To get it to work the Devs need an official GB to drop
Big Dogg Infuse I997 ZeusB5 ICS!

bignate78 said:
MHL does Not work on any recent GB custom roms! This has been stated LONG time ago. Only works on froyo. To get it to work the Devs need an official GB to drop
Big Dogg Infuse I997 ZeusB5 ICS!
Click to expand...
Click to collapse
Or flash stock gb leaked rom.
Sent from my SAMSUNG-SGH-I997

jayson94538 said:
Or flash stock gb leaked rom.
Sent from my SAMSUNG-SGH-I997
Click to expand...
Click to collapse
Ummmmmmmmmm........ Moo
Sent from my SAMSUNG-SGH-I997 using Tapatalk

bionix build 3
Sent from my SAMSUNG-SGH-I997 using Tapatalk

sipora said:
My Infuse after being rooted and flashed Zeus 5.1 loses its MHL's functionality. I'm new to Infuse and Zeus so this might be an existing problem. Is there anyway we could get MHL working again?
Thanks, devs!
Click to expand...
Click to collapse
the problem isn't the rom its the kernel. You can use the bionix biui build 3 kernel if You use sgs kernel flasher. You will lose cwm and lagfix. remember to disable lagfix and reboot once before flashing.

Dani897 said:
the problem isn't the rom its the kernel. You can use the bionix biui build 3 kernel if You use sgs kernel flasher. You will lose cwm and lagfix. remember to disable lagfix and reboot once before flashing.
Click to expand...
Click to collapse
Thanks. What is the Bionix BIUI 3 kernel? stock kernel?

sipora said:
Thanks. What is the Bionix BIUI 3 kernel? stock kernel?
Click to expand...
Click to collapse
yes you can pull it out of the kl2 leak as well.

http://www.multiupload.com/PP69TXBEA5
Here is the stock KL2 kernel
Sent from my SAMSUNG-SGH-I997