so i just got my asus TF and when i saw the 3.1 leaked i immediately updated..
but now i wanna try to run the supposed stable 1.6 overlock kernal
did i jump the gun? or is there still a way to root my android device and get this accomplished?
Jumped the gun. No custom kernels are compatible with the 3.1 update yet since they'll need to kernel source for it.
While no kernel yet. You should have root with old firmware than update to 3.1 with the rooted 3.1 rom. Custom kernel for 3.1 probably in a week or two max.
I'm using 3.1 right and have no reason to actually overclock. Once it's a available i'll do so but it's so smooth that there is no need.
b1ackplague said:
I'm using 3.1 right and have no reason to actually overclock. Once it's a available i'll do so but it's so smooth that there is no need.
Click to expand...
Click to collapse
ye, 3.1 is much more silky smooth than 1.4G @ 3.0
Hmmm, the only thing now is no cifs included...
Did anyone get this working ready? Was wondering if I could stream 720p mkv's now
And is the sleep of death back? It was fixed for me with the netformer custom kernel..
dagrim1 said:
Hmmm, the only thing now is no cifs included...
Did anyone get this working ready? Was wondering if I could stream 720p mkv's now
Click to expand...
Click to collapse
[INFO] Cifs on leaked 3.1
Mixed reports of it working.
Related
i have a rooted tf and i was just wondering what is the best stable/not buggy rom to flash onto my device
Quick reply:
1. If you're rooted go with Prime 1.5 great rom everything you need.
2. Wrong spot to post, if I were you report this post before you get flamed at by the "trolls".
well im a sorta noob lol dont get to pissed
There aren't really that many mods out yet since we don't have the source code. All the Rome now are just customized 3.1 roms. I'd say prime 1.5 is the best with magnus supreme and clemsyns roms being based off of them.
Read my sig,i think thats whats best.
prime 1.5 is a great ROM, but Clemsyn has OC kernel that I find to be awesome.
djgerbavore said:
prime 1.5 is a great ROM, but Clemsyn has OC kernel that I find to be awesome.
Click to expand...
Click to collapse
ok, stupidly i installed madaco rom v7 and i hate it is there a way to install prime over this?
I am using Revolver 0.2 and loving it so far! It is a fast ROM that just seems to work out-of-box. Wth other ROMS I have had issues that needed fixing after flashing the ROM but with Revolver things just seem to work out-of-box. Very happy with Revolver.
just installed my first custom rom and decided to go for the clemsys one
for me it just rocks, stable, fast and with the battery profiling in combination with pimpmycpu, this thing just flies when it needs to and powersaves when it doesn't
im with prime 1.6 its do 3300 on smartbench productive test no OC
games score is 2300
I went with Revolver 1.0.1 on top of a stock rooted 3.1 and I'm quite happy. Easy to do, worked the first time, OC'd and not too much mucked with. Just the way I like it.
Hi guys,
Im on a rooted 3.1 in UK with regular 3.1 update from Motorola.
I am just looking for a Kernel n not a rom hence dont prefer the Hammerhead rom
Will Launchpad 1.3.0 kernel work for me?
many thanks
If its not a 3g model then it would work. Make sure you grab the appropriate kernel for HC 3.1
Sent from my MZ601 using Tapatalk
rndinit0 said:
If its not a 3g model then it would work. Make sure you grab the appropriate kernel for HC 3.1
Sent from my MZ601 using Tapatalk
Click to expand...
Click to collapse
thanks for your reply fella,
it is the 3g version (MZ601)
Any kernel suggestion for this model??
cheers
I have used Tiamat Kernel, the older 1.4.4 works fine with 3.1 EU ROM. Have this running a few hours and no problems yet. Can also mount my USB stick and external HDD, works fine so far.
If im not mistaking there's a 2.x tiamat kernel for 3.1 as well.
I have a 3g xoom euro as well. Its running 3.2 though.
Sent from my GT-I9100 using Tapatalk
Lupus77 said:
I have used Tiamat Kernel, the older 1.4.4 works fine with 3.1 EU ROM. Have this running a few hours and no problems yet. Can also mount my USB stick and external HDD, works fine so far.
Click to expand...
Click to collapse
Mate from this link do i Just use the kernel download http://www.xoomforums.com/forum/tea...ernel-tiamat-1-4-4-3-1-only-new-6-2-11-a.html
Tiamat 1.4.4- http://www.android.net/forum/downloa...?do=file&id=74
I downloaded the kernel here: http://bigrushmods.com/tiamat.html ( Tiamat 1.4.4 1.7Ghz )
Lupus77 said:
I downloaded the kernel here: http://bigrushmods.com/tiamat.html ( Tiamat 1.4.4 1.7Ghz )
Click to expand...
Click to collapse
cheers mate, i downloaded the Tiamat 1.4.4 1.7Ghz w/ ocGPU n it works well
Hi, im use my Infuse to watch netflix over HDMI, im currently on stock as you can see, my questionits... the HDMI working depends on the kernel? o what component?
I would be happy to overclock but dont know if that will break my HDMI.
Also... unrelated question.... ive been meaning to change the boot animation... yest i do not find " bootanimation.zip anywhere oly the samsungbootanim.qmg on /system/media
I read on some thread that i could change the boot anim by renaming the bootanimation.zip i donload into a "sanim.zip"... yet i cant get it to work...
tnks
koriotto said:
Hi, im use my Infuse to watch netflix over HDMI, im currently on stock as you can see, my questionits... the HDMI working depends on the kernel? o what component?
I would be happy to overclock but dont know if that will break my HDMI.
Also... unrelated question.... ive been meaning to change the boot animation... yest i do not find " bootanimation.zip anywhere oly the samsungbootanim.qmg on /system/media
I read on some thread that i could change the boot anim by renaming the bootanimation.zip i donload into a "sanim.zip"... yet i cant get it to work...
tnks
Click to expand...
Click to collapse
Check out Infuse 1.6 and Refuse ROM's. You can still OC with Bedwa's Infusion Froyo Kernel. I think.
EricNagel said:
Check out Infuse 1.6 and Refuse ROM's. You can still OC with Bedwa's Infusion Froyo Kernel. I think.
Click to expand...
Click to collapse
As previously mentioned...I need to keep the HDMI working thats why i flashed back to stock.... and any custom ROM currently will break the HDMI capability
but tnks
koriotto said:
As previously mentioned...I need to keep the HDMI working thats why i flashed back to stock.... and any custom ROM currently will break the HDMI capability
but tnks
Click to expand...
Click to collapse
I thought Froyo Roms kept HDMI? All GB roms lose HDMI, but I'm not telling you to look at GB roms. Infused 1.6 and Refuse are Froyo.
EricNagel said:
I thought Froyo Roms kept HDMI? All GB roms lose HDMI, but I'm not telling you to look at GB roms. Infused 1.6 and Refuse are Froyo.
Click to expand...
Click to collapse
Hm.... imteresting... maybe im missinformed... ill give infused 1.6 a try then
It's kernel and userland.
The Rogers kernel and userland (Gingerbread) are both missing HDMI support. We added back what we could on the kernel side but it wasn't enough.
The AT&T Froyo kernel and userland, along with anything built from the Froyo source code (custom ROMs and kernels), does have HDMI.
Alright tnks for all the info!
Sent from my SAMSUNG-SGH-I997 using XDA App
Hi all,
Well, i want to install a costom ROM+Kenel in my Transformer.
I currently have Honeycomb 3.2.1 and Kernel 2.6.36.1.
Anyone knows what might be the best ROM+Kernel? I've seen Prime V.2.05 and Netformer.
Just to be sure i don't something stupid: first i need to install CWM, then install ROM and kernel, right?
Thank you!
i have revolver and blades 2 and its FAST
Sent from my Transformer TF101 using xda premium
Pete2R said:
Hi all,
Well, i want to install a costom ROM+Kenel in my Transformer.
I currently have Honeycomb 3.2.1 and Kernel 2.6.36.1.
Anyone knows what might be the best ROM+Kernel? I've seen Prime V.2.05 and Netformer.
Just to be sure i don't something stupid: first i need to install CWM, then install ROM and kernel, right?
Thank you!
Click to expand...
Click to collapse
Actually first you need to find out if your TF is even rootable.
If rootable than yes root, install CWM than flash ROM + kernel
megacoolrock said:
i have revolver and blades 2 and its FAST
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
me too. i have tried every rom, but went back to revolver.
I didn't know this tablets could run custom roms
Perfect Question! I have owned my TF for less than a week. Figured out how to root and install CWM thanks to some nice detailed posts. I am currently running PRIME 2.0.5 with Clemsyns 22 OC kernel at 1424 max.
Why I chose PRIME? I saw a Youtube video on it. So I have read and read multiple threads on ROMs here. Looks like the choice of three. So far this is very stable and seems fast. I have had no fc's or issues like that.
I am interested as well as which ROM people prefer and why? I know a lot comes down to personal preference. I'm looking for stability, speed, compatibility, updates.
Sent from my Transformer TF101 using Tapatalk
Thank you all for your replies!
Yesterday I finally decided to go with Prime 1.6 and netformer OC 1.6ghz.
Well, one thing is sure, it's clearly faster now...
Now I get 6000+ on antutu benchmark!
Wow, you're lucky you have one that can go that high. Some tf cannot be OC to 1.6. Mine, for example, can only be OC to 1.4 before it freezes and crash.
hey I'm rooted on revolver 3.9.3,but when I go to download a kernel or a theme on the app it only downloads 576kb of it. any suggestions?
you may find it there:
http://www.gnufabio.com/revolver/dls/
michadreyer said:
you may find it there:
http://www.gnufabio.com/revolver/dls/
Click to expand...
Click to collapse
thanx
michadreyer said:
you may find it there:
http://www.gnufabio.com/revolver/dls/
Click to expand...
Click to collapse
btw cuz i just rooted the other day wat is the best kernal tht i should use
gnufabo suggests stock but i think blades 2 is the best
With the latest firmware update, all custom kernels have become unstable, including blades. People have reported their TF locking up with custom kernels. The only custom kernel that isn't unstable is clemsyn v21. Unfortunately, there's a battery drain of the dock with this kernel.
For now, until the kernel devs figure out what the hell is going on, the best thing for yout to do is use the stock kernel.
I havent had issue one with Roach's overclock kernel set at 1.4
thebadfrog said:
I havent had issue one with Roach's overclock kernel set at 1.4
Click to expand...
Click to collapse
This is certainly good news. What's happening is that different people are reporting different results.
goodintentions said:
With the latest firmware update, all custom kernels have become unstable, including blades. People have reported their TF locking up with custom kernels. The only custom kernel that isn't unstable is clemsyn v21. Unfortunately, there's a battery drain of the dock with this kernel.
For now, until the kernel devs figure out what the hell is going on, the best thing for yout to do is use the stock kernel.
Click to expand...
Click to collapse
I'm using Clem's v22a, just as always, and I am not having any issues whatsoever.
philburkhardt said:
I'm using Clem's v22a, just as always, and I am not having any issues whatsoever.
Click to expand...
Click to collapse
I think blades 2 is OK haven't had problems but I'm just gonna go back to stock ;-)
Using Prime v2.0.6 kernel since Monday and it is stellar. No problems whatsoever. 3300 on Quadrant too!
I've actually been just fine with the Blades 2 kernel... No issues whatsoever - not even any excessive battery drain. OC'd to 1540.