This is a guide for those that are missing Wifi Calling. It seems that after getting s-off via revolutionary, the mid is change to PG58***** (at least for me). And I think that's the reason why the roms don't recognise that it's a T-Mobile Sensation 4g.
Flash the ENG Hboot by copying to the root of your sdcard and reboot into bootloader.
http://81.89.105.12/~bin4ry/hboot/PG58IMG.zip
md5: 75e127836ff2421c3243977ffd625eef
After you flashed the file, reboot in to fastboot and run these commands.
fastboot oem writecid T-MOB010
fastboot oem writemid PG5810000
fastboot reboot-bootloader
Click to expand...
Click to collapse
After it reboots, run these commands and check if it matches.
fastboot getvar cid
fastboot getvar mid
Click to expand...
Click to collapse
After I flashed the hboot, I couldn't get pass the boot screen. So I wiped the device. You can just do factory rest in recovery or flash Super Wipe in recovery.
http://tinyurl.com/6bh9jvc
md5: d49be5127dd3858d1c755254689cf92c
After it reboots back to recovery, you can flash your favorite roms and you should have Wifi Calling.
Credits goes to rahan95 and Bin4ry for the hboot and mike1986 for SuperWipe.
Much easier to just have a wifi calling flashable, no? Feels like there is too much room for error for some of the new users...
Just my opinion...
Sent from my HTC Doubleshot using Tapatalk
cg87 said:
This is a guide for those that are missing Wifi Calling. It seems that after getting s-off via revolutionary, the mid is change to PG58***** (at least for me). And I think that's the reason why the roms don't recognise that it's a T-Mobile Sensation 4g.
Flash the ENG Hboot by copying to the root of your sdcard and reboot into bootloader.
http://81.89.105.12/~bin4ry/hboot/PG58IMG.zip
md5: 75e127836ff2421c3243977ffd625eef
After you flashed the file, reboot in to fastboot and run these commands.
After it reboots, run these commands and check if it matches.
After I flashed the hboot, I couldn't get pass the boot screen. So I wiped the device. You can just do factory rest in recovery or flash Super Wipe in recovery.
http://tinyurl.com/6bh9jvc
md5: d49be5127dd3858d1c755254689cf92c
After it reboots back to recovery, you can flash your favorite roms and you should have Wifi Calling.
Credits goes to rahan95 and Bin4ry for the hboot and mike1986 for SuperWipe.
Click to expand...
Click to collapse
Thanks. Was wondering why the issue with recognizing as an HTC Sensation 4G, but I still had wifi calling working with correct lib files and build.prop edits. BTW, I had no reboot issues. I used the fastbot com
command on the hboot.img directly:
fastboot flash hboot hboot.img
Romanbb said:
Much easier to just have a wifi calling flashable, no? Feels like there is too much room for error for some of the new users...
Just my opinion...
Sent from my HTC Doubleshot using Tapatalk
Click to expand...
Click to collapse
Where can I get a WiFi Calling flashable? The one by xboarder56 no longer works for me. I'm running on CM7 Alpha 7 without WiFi Calling. I have 2 other Sensations that have WiFi Calling, though.
WiFi Calling never came back for me ever since kmobs suggested to deleted the apk in Alpha 1 for those who had problems with WiFi Calling FCing. After I deleted it, I used xboarder56's patch to get the apk back, but now it doesn't work. I've tried wiping and reflashing Alpha 7 to no avail.
The OP seems to have had a different problem losing WiFi Calling and doesn't apply to my case. I only read the thread hoping it would pertain to my problem, but it doesn't. If I can get any help getting WiFi Calling back, that would be very much appreciated.
BTW, my Sensation is already ENG S-OFF since day one.
mutiny said:
Where can I get a WiFi Calling flashable? The one by xboarder56 no longer works for me. I'm running on CM7 Alpha 7 without WiFi Calling. I have 2 other Sensations that have WiFi Calling, though.
WiFi Calling never came back for me ever since kmobs suggested to deleted the apk in Alpha 1 for those who had problems with WiFi Calling FCing. After I deleted it, I used xboarder56's patch to get the apk back, but now it doesn't work. I've tried wiping and reflashing Alpha 7 to no avail.
The OP seems to have had a different problem losing WiFi Calling and doesn't apply to my case. I only read the thread hoping it would pertain to my problem, but it doesn't. If I can get any help getting WiFi Calling back, that would be very much appreciated.
BTW, my Sensation is already ENG S-OFF since day one.
Click to expand...
Click to collapse
If you install Xboarders version 1.0.6 you have to edit the build.prop
After the line that reads:
ro.ril.hsxpa = 3
ADD:
ro.ril.enable.ganlite = 1
After the line that reads:
rild.libpath=/system/lib/libhtc_ril.so
# RilLibPath for Ganlite by Godel_Chen
ADD:
rild.libpath.ganlite=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
rilswitch.ganlibpath=/system/lib/libganril.so
Novembre5 said:
If you install Xboarders version 1.0.6 you have to edit the build.prop
After the line that reads:
ro.ril.hsxpa = 3
ADD:
ro.ril.enable.ganlite = 1
After the line that reads:
rild.libpath=/system/lib/libhtc_ril.so
# RilLibPath for Ganlite by Godel_Chen
ADD:
rild.libpath.ganlite=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
rilswitch.ganlibpath=/system/lib/libganril.so
Click to expand...
Click to collapse
Thanks, I'll try that right now.
I only realized now that 1.0.6 didn't come with a build.prop. Noob moment. :]
mutiny said:
Thanks, I'll try that right now.
I only realized now that 1.0.6 didn't come with a build.prop. Noob moment. :]
Click to expand...
Click to collapse
No problem. Just don't forget to reboot after you edit the build.prop
Novembre5 said:
No problem. Just don't forget to reboot after you edit the build.prop
Click to expand...
Click to collapse
Actually, I just did what you said and put that build.prop into the 1.0.6 zip and flashed it all together. That way I got to wipe cache, Dalvik, etc. and reboot all at once.
---------- Post added at 10:19 AM ---------- Previous post was at 10:13 AM ----------
I just did all that and my phone isn't booting up.
The line:
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
Is it supposed to be that? Or this:
rilswitch.vendorlibpath=/system/lib/libhtc_ril_switch.so
mutiny said:
Actually, I just did what you said and put that build.prop into the 1.0.6 zip and flashed it all together. That way I got to wipe cache, Dalvik, etc. and reboot all at once.
---------- Post added at 10:19 AM ---------- Previous post was at 10:13 AM ----------
I just did all that and my phone isn't booting up.
The line:
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
Is it supposed to be that? Or this:
rilswitch.vendorlibpath=/system/lib/libhtc_ril_switch.so
Click to expand...
Click to collapse
When you added the build.prop did you include the original build.prop info and just add what I told you? Or, did you just put these in the build.prop and not include the original info? If you did not include the original info, then that is your problem, that is why I said to just add that info to the current build.prop, so you did not lose the rest of the info that was in the original build.prop
Novembre5 said:
When you added the build.prop did you include the original build.prop info and just add what I told you? Or, did you just put these in the build.prop and not include the original info? If you did not include the original info, then that is your problem, that is why I said to just add that info to the current build.prop, so you did not lose the rest of the info that was in the original build.prop
Click to expand...
Click to collapse
LOL. Of course I only appended the lines you gave me. The original build.prop is untouched aside from those lines I've added.
just drag the cm7 build.prop in my wifi calling patch v1.0.6 and bam it will work enjoy people
xboarder56 said:
just drag the cm7 build.prop in my wifi calling patch v1.0.6 and bam it will work enjoy people
Click to expand...
Click to collapse
I've actually done that and it didn't work.
I took the build.prop from CM7 Alpha 7, dropped it in /system in your 1.0.6 zip and flashed the patch. No go.
mutiny said:
I've actually done that and it didn't work.
I took the build.prop from CM7 Alpha 7, dropped it in /system in your 1.0.6 zip and flashed the patch. No go.
Click to expand...
Click to collapse
Make sure it is still build.prop and not build.prop.txt
I have made that mistake before.
Novembre5 said:
Make sure it is still build.prop and not build.prop.txt
I have made that mistake before.
Click to expand...
Click to collapse
Lol. As a programmer, I definitely know it's not .txt. Hahaha.
I don't think it has to do anything with the hboot. Just change your cid and mid to fit T-Mobile.
Romanbb said:
Much easier to just have a wifi calling flashable, no? Feels like there is too much room for error for some of the new users...
Just my opinion...
Sent from my HTC Doubleshot using Tapatalk
Click to expand...
Click to collapse
Wow, I didn't even know that there was an apk for it. But you only have to do this once instead of flashing the apk every time you change rom.
blahbl4hblah said:
I don't think it has to do anything with the hboot. Just change your cid and mid to fit T-Mobile.
Click to expand...
Click to collapse
You need the engineering hboot to change the mid.
Again, I think the problem is that the mid was changed when getting s-off via revolutionary. Maybe they should add an option to select the correct version in their program?
this worked awesome for me got wifi calling to work again!
Related
I've seen devs mention to flash a radio from Hboot and Fast boot before. Are these terms synonymous? Fast boot is accessed from Hboot correct? I've flashed a radio a few times, but never understood the terminology. A PD98IMG is always flashed the same way from what I understand.
More or less correct. HBoot flashing is done with the PD98IMG.zip on the SDcard. PD98IMG.zip can contain any number of images to be flashed. Fastboot flashing is done using the fastboot.exe and can flash a single image.
Gene Poole said:
More or less correct. HBoot flashing is done with the PD98IMG.zip on the SDcard. PD98IMG.zip can contain any number of images to be flashed. Fastboot flashing is done using the fastboot.exe and can flash a single image.
Click to expand...
Click to collapse
I've never quite understood what the advantage is to fastboot flashing. Then again, I've never truly understood fastboot in general.
Something I definitely need to do more reading on.
I've tried several times, and several methods to flash my radio to the 12.54.60.25_26.09.04.11_M2 radio img. And nothing seems to be working. My best guess is its user error. I'm a noob and trying to learn how to flash my radio. I currently have the 12.39.30.19P-26.06.04_M with the TPGB-Ninja_0618 ROM and [email protected] #28 kernel.
I've done the method where i go into adb to access bootloader, then i flash the radio.img then reboot the phone and that doesnt work. I've tried running the radio.img though CWM and that didn't work.
If I power off my phone and then hold power and -vol down to get into the bootloader it automatically will go into hboot and start to run through the PD98IMG.zip. I'm wondering.
Do I need that .zip folder on my sdcard forever or can I get rid of it?
Also, can I just switch out radio.img in the PD98IMG.zip with the new radio.img?
Can I do the above question without having all the other .img 's in the .zip folder?
I've done some research, but haven't found my answers, or was able to fix my problem.
So hopefully someone can help me.
Please be gentle with me, I'm new to this type of thing, but a fast learner.
Thanks in advance
shugga101 said:
I've tried several times, and several methods to flash my radio to the 12.54.60.25_26.09.04.11_M2 radio img. And nothing seems to be working. My best guess is its user error. I'm a noob and trying to learn how to flash my radio. I currently have the0 12.39.30.19P-26.06.04_M with the TPGB-Ninja_0618 ROM and [email protected] #28 kernel.
I've done the method where i go into adb to access bootloader, then i flash the radio.img then reboot the phone and that doesnt work. I've tried running the radio.img though CWM and that didn't work.
If I power off my phone and then hold power and -vol down to get into the bootloader it automatically will go into hboot and start to run through the PD98IMG.zip. I'm wondering.
Do I need that .zip folder on my sdcard forever or can I get rid of it?
Also, can I just switch out radio.img in the PD98IMG.zip with the new radio.img?
Can I do the above question without having all the other .img 's in the .zip folder?
I've done some research, but haven't found my answers, or was able to fix my problem.
So hopefully someone can help me.
Please be gentle with me, I'm new to this type of thing, but a fast learner.
Thanks in advance
Click to expand...
Click to collapse
Assuming the PD98IMG.zip containing the radio flashes properly, you can remove it afterwards.
Have you checked out the inspire only radio thread in the dev section, yet?
There's already a ready-to-flash PD98IMG.zip for the radio you want to flash on that thread.
Download it from that thread, verify the MD5 checksum, plop it in the root directory of your SD card, reboot into hboot/bootloader, once it finds the PD98IMG.zip, confirm the update, and away you go.
Ok I'll try that as soon as I get to my computer. Thanks for the reply and I'll let you know how it goes.
Sent from my Inspire 4G using XDA App
shugga101 said:
Ok I'll try that as soon as I get to my computer. Thanks for the reply and I'll let you know how it goes.
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
Just don't forget to check that MD5. I have had incomplete (meaning...BAD) radio downloads on a solid WiFi connection, so it DOES happen from time to time.
Scott_S said:
Just don't forget to check that MD5. I have had incomplete (meaning...BAD) radio downloads on a solid WiFi connection, so it DOES happen from time to time.
Click to expand...
Click to collapse
I was able to flash the radio, but all that work for nothing. I actually got worse data. But then again I could of done something wrong again.
shugga101 said:
I was able to flash the radio, but all that work for nothing. I actually got worse data. But then again I could of done something wrong again.
Click to expand...
Click to collapse
Couple of things. 1) Be sure to give the radio long enough to "warm up"...I'ave had it take several hours after flashing before I started getting decent speeds from a radio I know works. 2) It is usually recommended to keep a copy of your radio flash on your SD card in case you need it (GPS fail, etc., ) so you can reflash if you are away from a PC, but not keep it in the root of your SD. It's very possible to end up in a continuous boot loop until you somehow either get the file off your root (SD card reader) or fool the phone into thinking it isn't there by pulling the SD card when you pull the battery to recover (I've only heard the last trick works)...
shugga101 said:
I was able to flash the radio, but all that work for nothing. I actually got worse data. But then again I could of done something wrong again.
Click to expand...
Click to collapse
You've also made sure you have the appropriate RIL for the new radio you flashed, correct? That radio thread also has the RILs + info about them, as well.
Also try rebooting more than once after flashing a radio/ril, just for good measure.
When I first flashed the 04_11_M2 radio, I had only rebooted once, as a result of the flashing process. Once my phone was done loading up, I received my first call with it, the caller couldn't hear me, but I could hear them. Caller tried calling back. Same thing. I decided to give it another flash and reboot. I called that person back, and it was working, never experienced that since.
Coincidence? Who knows? But radios are weird, quirky things that seem to need a little "voodoo" type flashing/rebooting to kick them in, I suspect.
Well I think I found out why I'm getting these speeds. My radio has a "P" and not a "U" like in meiguoguizi's sig. I have the same radio as that (number wise) but he has a "U" and not a "P".
The radios that I can flash have an "x" in that place so won't that just mean it will switch to whatever letter my data is running on?
I think I found out why I am having this problem.
I can flash the radio.
I can flash the RIL.
But I have a "P" where the "U" is supposed to be to represent the HSUPA speeds.
If thats the the reason then I don't know.
shugga101 said:
Well I think I found out why I'm getting these speeds. My radio has a "P" and not a "U" like in meiguoguizi's sig. I have the same radio as that (number wise) but he has a "U" and not a "P".
The radios that I can flash have an "x" in that place so won't that just mean it will switch to whatever letter my data is runningo on?
Click to expand...
Click to collapse
I think that U/P thing is determined by one of the settings in the build.prop file. I know it's been discussed before, I just don't recall the details. If you visit the "editing the build.prop file" thread in the dev section, or possibly amongst the comments in the inspire radio thread, I think you might find the specifics in one of those places.
Or browse through henrybravo's posts, I think I remember him explaining it to someone.
Bottom line is that you have the same radio, it's just a setting that's determining the connection type and as a result, that letter changes, depending on that setting.
LeeDroid
Today I flashed the 09.04.11_M2 that is suggested on for LeeDroid 3.2.1 and now I have lost all notification sounds, lockscreen sounds, and keyboard sound feedbacks. Can anyone help?
blippy said:
Today I flashed the 09.04.11_M2 that is suggested on for LeeDroid 3.2.1 and now I have lost all notification sounds, lockscreen sounds, and keyboard sound feedbacks. Can anyone help?
Click to expand...
Click to collapse
First, try another re-flash of the radio.
I did a full wipe and restore and got all the sounds back. Reloaded the RIL and everything works fine.
Sent from my Desire HD using XDA App
Yes the x is a placeholder (remember your algebra).
Open he's right. You have to flash the Riley that goes with the radio and then reboot twice. Make sure you are using the best radio for your Rome.
Sent from my Desire HD using XDA App
Pick_A_Name said:
Yes the x is a placeholder (remember your algebra).
Open he's right. You have to flash the Riley that goes with the radio and then reboot twice. Make sure you are using the best radio for your Rome.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Lol. Autocorrect really has the hots for you.
Lol sorry I was on my mobile and left too much to swift key X. I'll proof read next time!
Pick_A_Name said:
Yes the x is a placeholder (remember your algebra).
Open he's right. You have to flash the Riley that goes with the radio and then reboot twice. Make sure you are using the best radio for your Rome.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Rileys and Romes....I can dig it
Okay so i was having wifi issues on Trickdroid 7.0.0 TMOUS.. so i did a little searching and what not and found out i had to flash 2.3.5 parts/radio to get it working. before hand i was getting full bars/4g. After i flashed both 2.3.5 extra partitions, and the 2.3.5 radio i reboot to find out my wifi finally works, then i notice i have no signal.. i tried rebooting, etc didnt work. tried restoring the backup i made through clockwork before i flashed the radio; didnt work. tried taking out my SIM card and putting it back in, didnt work. ive tried flashing miui, trickdroid 8.x.x, a nandroid posted from stock 2.3.5, nothing will bring back my signal. so i thought maybe my SIM card is messed up, i put it in my backup go phone and i get full bars.
also, i tried RUU both 1.5.x and 1.8.x and both give me RUU error 155 after its done "sending files"..
any help would be awesome. could i flash a older radio or something??
edit: im on hboot 1.09 btw
Okay looks like no one knows how to fix this?
tried flashing a older radio and no go, and just flashed RUU 1.84 and no go as well. i flashed the international trickdroid and upon first boot i had signal (no 4g) and i was able to send a text to myself and received it. then i restarted my phone and.. gone that was before i flashed the RUU.
stratax said:
Okay looks like no one knows how to fix this?
tried flashing a older radio and no go, and just flashed RUU 1.84 and no go as well. i flashed the international trickdroid and upon first boot i had signal (no 4g) and i was able to send a text to myself and received it. then i restarted my phone and.. gone that was before i flashed the RUU.
Click to expand...
Click to collapse
Try this.
Originally Posted by ckpv5 View Post
As there are many questions on how to do OTA update & to revert to stock after a device is rooted and bootloader unlocked; I made this simple guide which I hope will help the newbies especially.
NOTE : always do a backup and a nandroid backup before trying any of these.
OTA update:
A) ROM is stock, bootloader unlocked, stock recovery and not rooted.
- just run the OTA update, there is no need to relock the bootloader
B) ROM is stock, bootloader unlocked, CWM recovery and not rooted.
- flash the stock recovery that comes with your RUU, extract the RUU for the stock recovery.
* boot to bootloader
* fastboot flash recovery recovery_signed.img
* fastboot reboot-bootloader
* fastboot erase cache
* fastboot reboot
- run the OTA update
C) ROM is stock, bootloader unlocked, stock recovery and rooted
- download OTA Rootkeeper from Play Store
- run the OTA Rootkeeper and click protect root
- run the OTA update, there is no need to relock bootloader
- Once done, run OTA Rootkeeper and click restore root
D) ROM is stock, bootloader unlocked, CWM recovery and rooted
- download OTA Rootkeeper from Play Store
- run the OTA Rootkeeper and click protect root
- no need to relock bootloader
- boot to bootloader and fastboot flash the stock recovery
- run the OTA update
- Once done, run OTA Rootkeeper and click restore root
E) ROM is custom, bootloader unlocked, CWM recovery and rooted and you have a stock nandroid backup
- flash the stock boot.img if after nandroid restore, you have a bootloop
- flash the stock recovery.img
- relock the bootloader - fastboot oem lock
- boot your device and run the OTA update
F) ROM is custom, bootloader unlocked, CWM recovery and rooted and you don't have a stock nandroid backup
- if you dont have the stock nandroid backup, you need to run RUU
- before you can run the RUU you need to:
* flash the stock recovery.img
* flash the stock boot.img (maybe no need)
* relock the bootloader - fastboot oem lock
* run RUU
- run device setup
- run the OTA update
Flashing RUU to revert to stock or to update your One S after you have a custom ROM installed.
- you must have the correct RUU for your device.
- if you are not sure, download CID Getter from Play Store and run it, it will show your CID.
- with your CID, you may be able to find a correct RUU for your device
then (even though some people may not agree with this, but this will bring no harm and it is noob-proof) do this:
1- flash a stock recovery.img
fastboot flash recovery recovery_signed.img
fastboot reboot-bootloader
fastboot erase cache
2- flash a stock boot.img
fastboot flash boot boot_signed.img
fastboot reboot-bootloader
fastboot erase cache
3- re-lock bootloader
fastboot oem lock
fastboot reboot-bootloader
fastboot erase cache
4- flash RUU
Note : for people with ERROR 155 UNKNOWN ERROR they need to go into HBOOT and select FASTBOOT and run the RUU to revert to stock (thanks Lloir)
And usually:
Error 155 - usually wrong recovery.img /wrong boot.img / unlocked bootloader
Error 140 - wrong bootloader / bootloader unlocked
Error 131 - wrong RUU for your device
Credit to all XDA members that posted all the guides in various forum thread and some from own experience which I compiled here for easy reference.
Click to expand...
Click to collapse
---------- Post added at 09:54 PM ---------- Previous post was at 09:41 PM ----------
stratax said:
Okay so i was having wifi issues on Trickdroid 7.0.0 TMOUS.. so i did a little searching and what not and found out i had to flash 2.3.5 parts/radio to get it working. before hand i was getting full bars/4g. After i flashed both 2.3.5 extra partitions, and the 2.3.5 radio i reboot to find out my wifi finally works, then i notice i have no signal.. i tried rebooting, etc didnt work. tried restoring the backup i made through clockwork before i flashed the radio; didnt work. tried taking out my SIM card and putting it back in, didnt work. ive tried flashing miui, trickdroid 8.x.x, a nandroid posted from stock 2.3.5, nothing will bring back my signal. so i thought maybe my SIM card is messed up, i put it in my backup go phone and i get full bars.
also, i tried RUU both 1.5.x and 1.8.x and both give me RUU error 155 after its done "sending files"..
any help would be awesome. could i flash a older radio or something??
edit: im on hboot 1.09 btw
Click to expand...
Click to collapse
So can you post the link to where you got the "2.3.5 extra partitions" and the radio from. And how did you flash them on your phone?
dc211 said:
Try this.
---------- Post added at 09:54 PM ---------- Previous post was at 09:41 PM ----------
So can you post the link to where you got the "2.3.5 extra partitions" and the radio from. And how did you flash them on your phone?
Click to expand...
Click to collapse
thank you for your reply. this is where i got it. http://forum.xda-developers.com/showthread.php?p=32170653 from "Rsotbiemrptson" i also got the radio update from him, what he posted.. http://forum.xda-developers.com/showthread.php?t=1657831&page=285 look at my quote at the bottom.
stratax said:
thank you for your reply. this is where i got it. http://forum.xda-developers.com/showthread.php?p=32170653 from "Rsotbiemrptson" i also got the radio update from him, what he posted.. http://forum.xda-developers.com/showthread.php?t=1657831&page=285 look at my quote at the bottom.
Click to expand...
Click to collapse
This is a tricky one but I got a few ideas. Need a little bit more info. What version of hboot do you have?
---------- Post added at 11:10 PM ---------- Previous post was at 11:02 PM ----------
dc211 said:
This is a tricky one but I got a few ideas. Need a little bit more info. What version of hboot do you have?
Click to expand...
Click to collapse
Oh i see 1.09 now. I understand why the updated adsp wcnss would fix your wifi but I can't really figure out what broke your radio. You flashed a bunch of different roms so you ruled that out. I would go ahead and try flashing the 2.35 radio again and see if that helps. If not flash an older radio and see.
I know how to undo all the changes you made but lets see what a new radio flash does first. Don't just flash the one you have but re-download it fresh and flash with that.
dc211 said:
This is a tricky one but I got a few ideas. Need a little bit more info. What version of hboot do you have?
---------- Post added at 11:10 PM ---------- Previous post was at 11:02 PM ----------
Oh i see 1.09 now. I understand why the updated adsp wcnss would fix your wifi but I can't really figure out what broke your radio. You flashed a bunch of different roms so you ruled that out. I would go ahead and try flashing the 2.35 radio again and see if that helps. If not flash an older radio and see.
I know how to undo all the changes you made but lets see what a new radio flash does first. Don't just flash the one you have but re-download it fresh and flash with that.
Click to expand...
Click to collapse
okay thank you. i will try a few more things. i really hope its not blacklisted, i really dont think it is though since it happened RIGHT afterwards.
oh other details is i didnt wipe or anything i just flashed both, partition parts/radio then rebooted and wifi worked then had no service.
stratax said:
okay thank you. i will try a few more things. i really hope its not blacklisted, i really dont think it is though since it happened RIGHT afterwards.
oh other details is i didnt wipe or anything i just flashed both, partition parts/radio then rebooted and wifi worked then had no service.
Click to expand...
Click to collapse
Since it just happened after you flashed new stuff that leads me to believe that was the cause. I'm pretty sure I know how to fix. But if it were me I'd start with re-flashing the radio.
I just installed the OTA 2.3.5 update over 1.84 RUU and still no go, im going to try to install the radio through recovery and see if that fixes it.
edit: well that was dumb.. now i have the updated hboot :l
stratax said:
I just installed the OTA 2.3.5 update over 1.84 RUU and still no go, im going to try to install the radio through recovery and see if that fixes it.
edit: well that was dumb.. now i have the updated hboot :l
Click to expand...
Click to collapse
Sorry to hear that! I didn't expect you to try that route. However, it should have resolved your issue the OTA would have overwritten everything you did. You couldn't get a cell signal after the RUU or OTA?
dc211 said:
Sorry to hear that! I didn't expect you to try that route. However, it should have resolved your issue the OTA would have overwritten everything you did. You couldn't get a cell signal after the RUU or OTA?
Click to expand...
Click to collapse
Still a no go.. D: im going to try and install trickdroid 7.0.0 and re-install that radio just to double check.
stratax said:
Still a no go.. D: im going to try and install trickdroid 7.0.0 and re-install that radio just to double check.
Click to expand...
Click to collapse
You can't reinstall the radio, those days are over for you. Sorry to be the bearer of bad news. You're stuck with 2.x RUU's only from now on to change radios.
Since your in this spot you might try the latest CM10 nightly they have implemented the radio firmware into the rom itself. That might allow you to sidestep your problem. Also check under about -> phone and see if your imei matches whats on the box that came with the phone.
Okay, i now know its not blacklisted. I just unlocked it with the unlock .exe and put a extra AT&T SIM card laying around and put in the AT&T APN and everything and still says "disconnected because service is unavailable". sooooo, thats good news! i guess..
im going to try to flash a nightly and see if that works. my brother just told me they are probably working on the 4g towers here and maybe thats why it isnt working on this phone and a few other people.. that would be cool, but frustrating that ive done all this.
edit: with the at&t SIM card it just says "no service" in the notifications bar. With the T-Mobile SIM card it says "Emergency calls only". weird
edit2: Still doesnt work with cyanogenmod 10.
stratax said:
Okay, i now know its not blacklisted. I just unlocked it with the unlock .exe and put a extra AT&T SIM card laying around and put in the AT&T APN and everything and still says "disconnected because service is unavailable". sooooo, thats good news! i guess..
im going to try to flash a nightly and see if that works. my brother just told me they are probably working on the 4g towers here and maybe thats why it isnt working on this phone and a few other people.. that would be cool, but frustrating that ive done all this.
edit: with the at&t SIM card it just says "no service" in the notifications bar. With the T-Mobile SIM card it says "Emergency calls only". weird
edit2: Still doesnt work with cyanogenmod 10.
Click to expand...
Click to collapse
im suck in the same place man i hope someone finds out
Yeah I thought today it might be fixed but its not. It finally finds T-Mobile if I search for it but it won't connect to it. It won't connect to att either when I put my att sim in. So I think its the phone having issues.. I've been seeing a lot of other people having them as well.
When I select any network or even automatic registration it says "can't connect right now. Try again later."
I uploaded two screen shots. It won't even let me call T-Mobile..
Sent from my HTC One S using xda app-developers app
stratax said:
Yeah I thought today it might be fixed but its not. It finally finds T-Mobile if I search for it but it won't connect to it. It won't connect to att either when I put my att sim in. So I think its the phone having issues.. I've been seeing a lot of other people having them as well.
When I select any network or even automatic registration it says "can't connect right now. Try again later."
I uploaded two screen shots. It won't even let me call T-Mobile..
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
yep dude same here that sucks man it happened after i put a rom on too
I'm glad I'm not the only one.. this is probably the last htc I will get. I hear it is happening on the one x as well. Tomorrow I'll call T-Mobile and ask about it.
Sent from my HTC One S using xda app-developers app
Can you check under about -> phone and see if your imei matches whats on the box that came with the phone. If you do can you give me the first 4 or 5 digits
stratax said:
I'm glad I'm not the only one.. this is probably the last htc I will get. I hear it is happening on the one x as well. Tomorrow I'll call T-Mobile and ask about it.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
same here man this sucks now i have to start all over but i didnt get it from t mobile but i went in there to get a sim card to see if that was it and they said they cant do nothing so i guess we are suck with a $600 ipod touch with ICS lol
dc211 said:
Can you check under about -> phone and see if your imei matches whats on the box that came with the phone. If you do can you give me the first 4 or 5 digits
Click to expand...
Click to collapse
I don't have the box, and the sticker on the back is mostly worn since I used the phone for a while without the sim cover (I bought it new without it). but I just looked in my google dashboard, and typed *#06# and it matched and I can see the last three digits on the sticker clearly and they match with both as well. the first 5 digits are: 35990
thanks.
ragin69 said:
same here man this sucks now i have to start all over but i didnt get it from t mobile but i went in there to get a sim card to see if that was it and they said they cant do nothing so i guess we are suck with a $600 ipod touch with ICS lol
Click to expand...
Click to collapse
I didn't get it from tmobile either, I bought it new from somebody. had the stickers and everything on it. I swear, every HTC phone I have ever had, has had at least 1 major issue. well, the g1 didn't.
edit: even people on the one v are having the issues:http://forum.xda-developers.com/showthread.php?t=1679461 serious HTC wtf
PLEASE MAKE A NANDROID BEFORE THAT
Hello XDA-Community,
This is the brand new RUU Radio from the EU 1.08es.50.02.21_10.09c.50.04L.
So here it is: only for HBOOT below 1.13
For Users who want an adventure, you can now downgrade your hboot: http://forum.xda-developers.com/showthread.php?t=1990043)
Downloads
http://d-h.st/fNB
MD5 Sum: c1b965f9db9bdc8425d6278aa4351090
ONLY FOR S4
How to install it:
Place the ZIP file on the root folder of your sdcard
Go to reocvery and then choose the Radio zip you downloaded before.
After the flash process finished, wipe your cache and your dalvik cache.
Boot the phone, or if you are an US Users, install the custom config for this radio below.
CONFIG FOR US USERS
Add this to your build.prob (/system/buld.prob or use the app: build.prob editor)
Code:
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.fast.dormancy.rule=2
ro.ril.radio.svn=5
A little list of improvments and bugs:
BUGS:
On Sense Rom's wifi will go out while screen is off. (Again, but CM10 problems can be fixed by adding US Rules of this Radio on build.prob)
Improvments:
Better receiption
Better switching between modes
Soon i will add an Aroma script with all RUU's
This radio is awesome on tmous in the north east Boston mass area thanks for the share
Sent from my HTC VLE_U using xda premium
pyro43284 said:
This radio is awesome on tmous in the north east Boston mass area thanks for the share
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
1. can you post a screenshot of your settings>about phone>baseband
2. can you copy your system/etc/firmware folder, zip it, and post it?
i keep getting 1.08ts after trying to flash according to instructions in OP, instead of 1.08es as this is supposed to be
tnpapadakos said:
1. can you post a screenshot of your settings>about phone>baseband
2. can you copy your system/etc/firmware folder, zip it, and post it?
i keep getting 1.08ts after trying to flash according to instructions in OP, instead of 1.08es as this is supposed to be
Click to expand...
Click to collapse
Yeah me too, it is because we use AOKP or CM10.
nespresso33 said:
Yeah me too, it is because we use AOKP or CM10.
Click to expand...
Click to collapse
im pretty sure if he posts that system/etc/firmware folder we could manually add it to the rom we use, then flash the rom and have it install that way
anyway, id like to try it
bored here
also, i cant extract the files from the radio.img,... extract.exe stops working every time
tnpapadakos said:
im pretty sure if he posts that system/etc/firmware folder we could manually add it to the rom we use, then flash the rom and have it install that way
anyway, id like to try it
bored here
also, i cant extract the files from the radio.img,... extract.exe stops working every time
Click to expand...
Click to collapse
these are the files extracted from radio.img but i don't not know how to integrate into CM10
https://www.dropbox.com/s/lp8xllp0i8z1gt2/radio.rar
Wait some time, i release thes week a zip file with Sense Radios and one with the CM10 counterparts
arko7123 said:
these are the files extracted from radio.img but i don't not know how to integrate into CM10
https://www.dropbox.com/s/lp8xllp0i8z1gt2/radio.rar
Click to expand...
Click to collapse
cool thanks, but i still want to see pyro43284's folder and screenshot....theres alot of files missing compared to the system/etc/firmware files cm10 has, which is the TMoUS newest radio...or maybe they didnt all extract or maybe this radio just updates these specific files in an already existing EU radio install....so pyro, if youre reading this, id still like to see those
I picked up a One S to keep me until my Nexus 4 arrives.
I love HTC phones OS but I hate the reception! I have had three HTC's, 3 Motorola, 1 Samsung and 1 LG in the last 6 months and the HTC have consistently been the worst for reception.
The current HTC, has this radio on it currently. 1.08ts.50.02.21_10.09c.50.04L. I am trying (unsuccessfully I might add) to flash a different radio (radio-0.16.31501S.17_2_10.23.31501S.10L)
I have tried fastboot, with no success ( I can a have been able to use fastboot on this current phone without issues), I have tried from CWM and have tried with TWP without success.
Here is my setup.
CM 10 (nightly but the lastest, 10-20121108-nightly-ville)
HBoot 1.14.0004
Current radio (however while in fastboot usb mode the radio reads 1.09ts.50.02.04?, why would this be different)
You see by the picture it is dropping the signal consistently.
Any help would be appreciated.
tnpapadakos said:
1. can you post a screenshot of your settings>about phone>baseband
2. can you copy your system/etc/firmware folder, zip it, and post it?
i keep getting 1.08ts after trying to flash according to instructions in OP, instead of 1.08es as this is supposed to be
Click to expand...
Click to collapse
Here's the screen shot... http://db.tt/OVvhQiSC thats the firmware had to make it a zip so I could put it in dropbox just extract it its NOT FLASHABLE
Anything else I can do to help??
Sent from my HTC VLE_U using xda premium
pyro43284 said:
Here's the screen shot... http://db.tt/OVvhQiSC thats the firmware had to make it a zip so I could put it in dropbox just extract it its NOT FLASHABLE
Anything else I can do to help??
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
thanks that great
looks like im gonna wait for tecardo to do his thing
was hoping they would be all the same files, and i was just gonna swap them out, but there are too many differences
http://d-h.st/XBu
This is for sense: ALL RADIOS
Tecardo said:
http://d-h.st/XBu
This is for sense: ALL RADIOS
Click to expand...
Click to collapse
???? It is a large file. If I install a sense rom with this change my radio if I flash it?
I still can't change my radio. I am going to flash the orginal RUU and hope that it will change my radio as it is different than what is on my phone now.
It is a large file. Last ditch effort.....
If I install a sense rom will flashing this change my radio?
thanks
Yes, this only changes radio. It's only avaible with hboot lower than 1.09
Tecardo said:
Yes, this only changes radio. It's only avaible with hboot lower than 1.09
Click to expand...
Click to collapse
Or CM10... dc211 made a flashable zip. Works great in US so far
anyone's speaker get fuzzy from time to time on phone calls? it only happens here and there but it get annoying cause its nice and loud. at first i thought it was other callers but its been happening on almost all my phone calls.
I'll try to re-flash and see if that helps. i always check md5 sum before i flash and follow OP but its weird..
Hey everyone, I found an alternate way of getting wifi to work for those of us who are on hboots 1.13+. All you need to do if flash the attached zip in recovery (I use twrp) and your phone should connect to wifi :highfive:
If for some reason your wifi still doesn't work, you might need to manually transfer the files over to ect/firmware with any file explorer that can go up to root and reboot your phone.
For those of you with an S3, I have now idea if this works as I only have the S4 version, but your more than free to try.
As with any mods, make sure you backup before flashing.
credit goes to virtuous team for their awesome rom
Please post your phone's stats and state whether the fix works or not.
Hopefully, we can narrow the issue down this way.
At the very least post your hboot, radio, cid, kernel and ROM.
Decided to test this. My results:
Trusted review by a RC:
IT WORKS! FOR REAL!
Click to expand...
Click to collapse
Flash this right over any SENSE 4 rom and enjoy wifi.
I flashed Viper 2 from scratch, booted up, tested wifi = nope. Went back into twrp flashed this, rebooted, insta-profit.
Thanks, Slar!
Is this something you created? If its something you found its nice to credit the source
Sent from my HTC VLE_U using xda premium
Spastic909 said:
Is this something you created? If its something you found its nice to credit the source
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
Nah, I'm no good at coding. I just flashed the virtuous jelly bean rom and noticed I had wifi. So I went through all the files related to wifi and saw they had these files added. So i just made a flashable zip with the files and boom! Instant wifi :highfive:
so i guess credit goes to virtuous team for their awesome rom
I m on tmous hboot 1.14.0004. Can somebody please confirm WiFi works with this hboot on viper jb Rom?
Just trying to be verbose here as I don't want to go through the whole process of unlock, root, twrp install, Rom flash, boot.IMG flash, WiFi fix flash (the zip in this thread), to find that WiFi doesn't work for this hboot.
Sent from my HTC VLE_U using xda app-developers app
I can confirm it works as I have the same hboot.
Worked for me.
Sent from my HTC One S using xda app-developers app
Will try in min
Sent from my HTC VLE_U using xda premium
AW: wifi fix for sense based roms
Thanks for the work. We will add our own solution (same way ) to the radio collection with more versions
Whooo hooo finally wifi working thakns alot
Sent from my HTC One S using xda premium
Alaq said:
Decided to test this. My results:
Trusted review by a RC:
Flash this right over any SENSE 4 rom and enjoy wifi.
I flashed Viper 2 from scratch, booted up, tested wifi = nope. Went back into twrp flashed this, rebooted, insta-profit.
Thanks, Slar!
Click to expand...
Click to collapse
I started from scratch with Viper rom 2.0 Erased everything,flashed the ROM then fastboot boot.img then wipped cache. Booted the phone,checked the wi-fi "error" Then went back to recovery,flashed the fix from this thread,rebooted and again "error" Then i copied the whole folder "etc" from the fix to the system,replacing everything,rebooted and again wi-fi "error" I have hboot 2.15 did someone tried with same boot as mine with luck....? I also tried the fix with the "Energy" ROM without luck there to..... Am i doing something wrong or it just ?does not work with hboot 2.15...
I think WiFi should already be working with your hboot with jb roms if I'm not mistaken. The only thing I can think of is that you didn't copy it to the correct destination, bad download, bad flash, or it might not be compatible with that hboot
slar said:
I think WiFi should already be working with your hboot with jb roms if I'm not mistaken. The only thing I can think of is that you didn't copy it to the correct destination, bad download, bad flash, or it might not be compatible with that hboot
Click to expand...
Click to collapse
I did a OTA update when i got my device with JB but i could never get wi-fi to work with Viper or Energy ROMS I might try the Viper 1.2.1 ROM just to see if it works with it. I`ve read that if you have updated OTA the official firmware that there should be no problem with the wi-fi,but they never worked for me with Viper 2.0 ROM and Energy one.Can someone tell me which folder to copy from the zip file in this thread and where exactly should i paste it. I really need the "quick settings" and the "HTC Media Link" application but the roms that have one-they don`t have the other...or maybe there is a rom that has both but i did not found it yet...
Thanks in advance.
You need to go up to root and replace the firmware folder with the one in the zip to etc/firmware and system/etc/firmware
slar said:
You need to go up to root and replace the firmware folder with the one in the zip to etc/firmware and system/etc/firmware
Click to expand...
Click to collapse
OK.so i have to replace files in two places.....aha...will try this now and report in few....
Thanks.
mulderfbi said:
I started from scratch with Viper rom 2.0 Erased everything,flashed the ROM then fastboot boot.img then wipped cache. Booted the phone,checked the wi-fi "error" Then went back to recovery,flashed the fix from this thread,rebooted and again "error" Then i copied the whole folder "etc" from the fix to the system,replacing everything,rebooted and again wi-fi "error" I have hboot 2.15 did someone tried with same boot as mine with luck....? I also tried the fix with the "Energy" ROM without luck there to..... Am i doing something wrong or it just ?does not work with hboot 2.15...
Click to expand...
Click to collapse
It's not supposed to say error. It only says error if the kernel/radio is incorrect or incompatible... (Don't take this for granted, I say this from experience, I could be wrong though)
Alaq said:
It's not supposed to say error. It only says error if the kernel/radio is incorrect or incompatible... (Don't take this for granted, I say this from experience, I could be wrong though)
Click to expand...
Click to collapse
OK...so i did replace the files in etc/firmware and in system/etc/firmware and when i rebooted the wi-fi was "off" Before it was on "error" sign even from the very beginning. I tried to turn it on,but got "error" message again. So i think i have incompatible kernel/radio issue,and since i cannot flash radio with 2.15 hboot there is no cure... My Baseband version is: 1.11.50.05.28_10.27.50.08L Kernel version: 3.4.10-gae8b65e [email protected]#1 SMP PREEMPT Now i will flash the Energy ROM,because there i have wi-fi turning "on" and see all the networks but would`n connect. Hope to have a better luck there....
---------- Post added at 08:05 PM ---------- Previous post was at 07:31 PM ----------
Originally Posted by Alaq
It's not supposed to say error. It only says error if the kernel/radio is incorrect or incompatible... (Don't take this for granted, I say this from experience, I could be wrong though)
Click to expand...
Click to collapse
mulderfbi said:
OK...so i did replace the files in etc/firmware and in system/etc/firmware and when i rebooted the wi-fi was "off" Before it was on "error" sign even from the very beginning. I tried to turn it on,but got "error" message again. So i think i have incompatible kernel/radio issue,and since i cannot flash radio with 2.15 hboot there is no cure... My Baseband version is: 1.11.50.05.28_10.27.50.08L Kernel version: 3.4.10-gae8b65e [email protected]#1 SMP PREEMPT Now i will flash the Energy ROM,because there i have wi-fi turning "on" and see all the networks but would`n connect. Hope to have a better luck there....
Click to expand...
Click to collapse
No luck with the Energy ROM to...Got "Error" again...too bad....
Try the virtuous ROM as that seems to have WiFi working for everyone and if it works. If it works, then I might need to make some changes to the zip file. If your WiFi still doesn't work with it, then I'm out if ideas
You can try changing your radio with tecardo's radio installer http://forum.xda-developers.com/showthread.php?t=1998270
mulderfbi said:
OK...so i did replace the files in etc/firmware and in system/etc/firmware and when i rebooted the wi-fi was "off" Before it was on "error" sign even from the very beginning. I tried to turn it on,but got "error" message again. So i think i have incompatible kernel/radio issue,and since i cannot flash radio with 2.15 hboot there is no cure... My Baseband version is: 1.11.50.05.28_10.27.50.08L Kernel version: 3.4.10-gae8b65e [email protected]#1 SMP PREEMPT Now i will flash the Energy ROM,because there i have wi-fi turning "on" and see all the networks but would`n connect. Hope to have a better luck there....
---------- Post added at 08:05 PM ---------- Previous post was at 07:31 PM ----------
No luck with the Energy ROM to...Got "Error" again...too bad....
Click to expand...
Click to collapse
slar said:
Try the virtuous ROM as that seems to have WiFi working for everyone and if it works. If it works, then I might need to make some changes to the zip file. If your WiFi still doesn't work with it, then I'm out if ideas
You can try changing your radio with tecardo's radio installer http://forum.xda-developers.com/showthread.php?t=1998270
Click to expand...
Click to collapse
I am installing a new radio now. Will see what happens after and if will installs at all.... Then i will try the Virtuous ROM and check again the wi-fi if this does`t work...
mulderfbi said:
I am installing a new radio now. Will see what happens after and if will installs at all.... Then i will try the Virtuous ROM and check again the wi-fi if this does`t work...
Click to expand...
Click to collapse
installed a different radio,but still no luck after applying the fix. When i flashed the viper rom my radio went back to 1.11 ! Now i am flashing the virtuous ville rom to see if there is a wi-fi connection.......
~15 min. later with Virtuous rom i have e perfect wi-fi.....but radio went back again to 1.11 I am staying with this rom for now cos got to go to bed Will see whats the batt. life like....
How to upgrade to latest Radio
Credits:
turge for help with flashable version
Trick Droid testers incl. nobnut, deagleone, hansbert, dunc, hdneuling, ajthescot, tecardo, kiray being happy guinea test pigs here by flashing this stuff with risky commands first
Me for finding the method and being crazy enough to shoot first at my One, lol
We are glad we have our unlocked devices and can happily flash Custom ROM`s, backup and restore nandroids or flash mods. Nevertheless there are still some restrictions, since we still have no S-Off. Last week the latest 1.29.401.12 OTA update arrived and there is an option to upgrade via firmware.zip.
BUT...
this involves a lot of time and effort by relocking, flashing, unlocking and saving / restoring your sd content and needs matching CID.
NOW...
there is a painless,fast and easy way to use latest ROM base with latest Radio without the need of matching CID
What`s the benefit of upgrading a Radio?
The baseband is responsible for:
Signal quality
WiFi and Bluetooth connectivity
GPS / aGPS
Can improve battery due to improved signal quality
Can even improve camera
and more...
Who needs this?
Everyone who flashed first Custom Rom and also wants best possible signal quality.
This is how you can upgrade your RADIO without S-Off
1. Download Radio update.zip below and copy to your SD
2. Only an optional step for those, who want to have a Radio Firmware backup just in case
a) Connect your device via USB in recovery and open cmd in fastboot folder:
adb shell
dd if=/dev/block/mmcblk0p31 of=/sdcard/radio_firmware.img
You will now have current Radio on SD as radio_firmware.img
Expected output:
PHP:
~ # dd if=/dev/block/mmcblk0p31 of=/sdcard/radio_firmware.img
dd if=/dev/block/mmcblk0p31 of=/sdcard/radio_firmware.img
153601+0 records in
153601+0 records out
78643712 bytes (75.0MB) copied, 11.826523 seconds, 5.4MB/s
3. Now just flash the Radio update.zip as usual in recovery, reboot your device and enjoy latest Radio
In case you want / need to restore your current Radio backup:
Either you adjust updater script to radio_recovery.img or just do it via adb in recovery:
dd if=/sdcard/radio_firmware.img of=/dev/block/mmcblk0p31
Download latest Radio from 2.17 base - 4A.16.3250.24_10.38.1150.03L
http://www.androidfilehost.com/?fid=23011596498370919
md5: 608F69629421993278010F5AA1A0A628
Download Radio from 1.29.401.12 WWE OTA - 4A.14.3250.13_10.33.1150.01L
http://www.androidfilehost.com/?fid=22926241640218828
md5: DD6FE84F9FDBD1F33D16703F2712CA38
5 starred
Oh man, were was this yesterday.
Great job, this will make everyone's life a lot easier.
Could someone do a dump of the stock 1.28.401.7 HTC_001 radio for me?
Scrap that saw it's for custom recovery only.
+1 (need to see if it's the new radio or just atmospheric conditions that have murdered my mobile net speed)
Sent from my HTC One using xda app-developers app
That's amazing work! Thanks so much. After flashing, is there a way to tell it's been changed in 'About'? I checked baseband and am unsure what the new radio is??
Is this the latest radio for USA AT&T?
poczynek said:
That's amazing work! Thanks so much. After flashing, is there a way to tell it's been changed in 'About'? I checked baseband and am unsure what the new radio is??
Click to expand...
Click to collapse
+1
grafik2 said:
Is this the latest radio for USA AT&T?
Click to expand...
Click to collapse
Unfortunately it doesnt seen to help the issue. I am still getting the 3g to H flash from the custom Rom.
Sent from my HTC One using xda premium
Ok so i updated and tested but no LTE/4G. I then restored with nandroid and it's LTE/4G in the same exact area i am in now.
just to be sure, I can use this with my German HTC One?
poczynek said:
That's amazing work! Thanks so much. After flashing, is there a way to tell it's been changed in 'About'? I checked baseband and am unsure what the new radio is??
Click to expand...
Click to collapse
I added baseband info to OP.
poczynek said:
Ok so i updated and tested but no LTE/4G. I then restored with nandroid and it's LTE/4G in the same exact area i am in now.
Click to expand...
Click to collapse
Nandroid does not backup or restore your Radio.
he_stheone64 said:
Nandroid does not backup or restore your Radio.
Click to expand...
Click to collapse
Oh god - me = dumb arse. Sorry yes of course it doesn't! Ok so 4G works (tail between legs!)
CID still has to match right?
For us on ATT with cid CWS_001 I would guess this doesnt work still?
emx_o said:
just to be sure, I can use this with my German HTC One?
Click to expand...
Click to collapse
Yes you can - it`s the Radio from WWE OTA.
aimetti said:
CID still has to match right?
For us on ATT with cid CWS_001 I would guess this doesnt work still?
Click to expand...
Click to collapse
This is a radio for the latest 1.29.401.12 firmware. If you are not on this firmware, why would you want to flash it?
This mod will flash the radio regardless of CID. All the more reason to make sure that you are on the correct firmware before flashing this (e.g. if you are updating to a later ROM version but haven't flashed a corresponding firmware zip.
The OP is very clear.
aimetti said:
CID still has to match right?
For us on ATT with cid CWS_001 I would guess this doesnt work still?
Click to expand...
Click to collapse
No it does not need a matching CID, I flashed this WWE version (HTC___001) on my German O2 phone (O2___102).
nobnut said:
This is a radio for the latest 1.29.401.12 firmware. If you are not on this firmware, why would you want to flash it?
This mod will flash the radio regardless of CID. All the more reason to make sure that you are on the correct firmware before flashing this.
The OP is very clear.
Click to expand...
Click to collapse
Dur , completely read it wrong. My bad
poczynek said:
Oh god - me = dumb arse. Sorry yes of course it doesn't! Ok so 4G works (tail between legs!)
Click to expand...
Click to collapse
LOL