I've seen devs mention to flash a radio from Hboot and Fast boot before. Are these terms synonymous? Fast boot is accessed from Hboot correct? I've flashed a radio a few times, but never understood the terminology. A PD98IMG is always flashed the same way from what I understand.
More or less correct. HBoot flashing is done with the PD98IMG.zip on the SDcard. PD98IMG.zip can contain any number of images to be flashed. Fastboot flashing is done using the fastboot.exe and can flash a single image.
Gene Poole said:
More or less correct. HBoot flashing is done with the PD98IMG.zip on the SDcard. PD98IMG.zip can contain any number of images to be flashed. Fastboot flashing is done using the fastboot.exe and can flash a single image.
Click to expand...
Click to collapse
I've never quite understood what the advantage is to fastboot flashing. Then again, I've never truly understood fastboot in general.
Something I definitely need to do more reading on.
I've tried several times, and several methods to flash my radio to the 12.54.60.25_26.09.04.11_M2 radio img. And nothing seems to be working. My best guess is its user error. I'm a noob and trying to learn how to flash my radio. I currently have the 12.39.30.19P-26.06.04_M with the TPGB-Ninja_0618 ROM and [email protected] #28 kernel.
I've done the method where i go into adb to access bootloader, then i flash the radio.img then reboot the phone and that doesnt work. I've tried running the radio.img though CWM and that didn't work.
If I power off my phone and then hold power and -vol down to get into the bootloader it automatically will go into hboot and start to run through the PD98IMG.zip. I'm wondering.
Do I need that .zip folder on my sdcard forever or can I get rid of it?
Also, can I just switch out radio.img in the PD98IMG.zip with the new radio.img?
Can I do the above question without having all the other .img 's in the .zip folder?
I've done some research, but haven't found my answers, or was able to fix my problem.
So hopefully someone can help me.
Please be gentle with me, I'm new to this type of thing, but a fast learner.
Thanks in advance
shugga101 said:
I've tried several times, and several methods to flash my radio to the 12.54.60.25_26.09.04.11_M2 radio img. And nothing seems to be working. My best guess is its user error. I'm a noob and trying to learn how to flash my radio. I currently have the0 12.39.30.19P-26.06.04_M with the TPGB-Ninja_0618 ROM and [email protected] #28 kernel.
I've done the method where i go into adb to access bootloader, then i flash the radio.img then reboot the phone and that doesnt work. I've tried running the radio.img though CWM and that didn't work.
If I power off my phone and then hold power and -vol down to get into the bootloader it automatically will go into hboot and start to run through the PD98IMG.zip. I'm wondering.
Do I need that .zip folder on my sdcard forever or can I get rid of it?
Also, can I just switch out radio.img in the PD98IMG.zip with the new radio.img?
Can I do the above question without having all the other .img 's in the .zip folder?
I've done some research, but haven't found my answers, or was able to fix my problem.
So hopefully someone can help me.
Please be gentle with me, I'm new to this type of thing, but a fast learner.
Thanks in advance
Click to expand...
Click to collapse
Assuming the PD98IMG.zip containing the radio flashes properly, you can remove it afterwards.
Have you checked out the inspire only radio thread in the dev section, yet?
There's already a ready-to-flash PD98IMG.zip for the radio you want to flash on that thread.
Download it from that thread, verify the MD5 checksum, plop it in the root directory of your SD card, reboot into hboot/bootloader, once it finds the PD98IMG.zip, confirm the update, and away you go.
Ok I'll try that as soon as I get to my computer. Thanks for the reply and I'll let you know how it goes.
Sent from my Inspire 4G using XDA App
shugga101 said:
Ok I'll try that as soon as I get to my computer. Thanks for the reply and I'll let you know how it goes.
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
Just don't forget to check that MD5. I have had incomplete (meaning...BAD) radio downloads on a solid WiFi connection, so it DOES happen from time to time.
Scott_S said:
Just don't forget to check that MD5. I have had incomplete (meaning...BAD) radio downloads on a solid WiFi connection, so it DOES happen from time to time.
Click to expand...
Click to collapse
I was able to flash the radio, but all that work for nothing. I actually got worse data. But then again I could of done something wrong again.
shugga101 said:
I was able to flash the radio, but all that work for nothing. I actually got worse data. But then again I could of done something wrong again.
Click to expand...
Click to collapse
Couple of things. 1) Be sure to give the radio long enough to "warm up"...I'ave had it take several hours after flashing before I started getting decent speeds from a radio I know works. 2) It is usually recommended to keep a copy of your radio flash on your SD card in case you need it (GPS fail, etc., ) so you can reflash if you are away from a PC, but not keep it in the root of your SD. It's very possible to end up in a continuous boot loop until you somehow either get the file off your root (SD card reader) or fool the phone into thinking it isn't there by pulling the SD card when you pull the battery to recover (I've only heard the last trick works)...
shugga101 said:
I was able to flash the radio, but all that work for nothing. I actually got worse data. But then again I could of done something wrong again.
Click to expand...
Click to collapse
You've also made sure you have the appropriate RIL for the new radio you flashed, correct? That radio thread also has the RILs + info about them, as well.
Also try rebooting more than once after flashing a radio/ril, just for good measure.
When I first flashed the 04_11_M2 radio, I had only rebooted once, as a result of the flashing process. Once my phone was done loading up, I received my first call with it, the caller couldn't hear me, but I could hear them. Caller tried calling back. Same thing. I decided to give it another flash and reboot. I called that person back, and it was working, never experienced that since.
Coincidence? Who knows? But radios are weird, quirky things that seem to need a little "voodoo" type flashing/rebooting to kick them in, I suspect.
Well I think I found out why I'm getting these speeds. My radio has a "P" and not a "U" like in meiguoguizi's sig. I have the same radio as that (number wise) but he has a "U" and not a "P".
The radios that I can flash have an "x" in that place so won't that just mean it will switch to whatever letter my data is running on?
I think I found out why I am having this problem.
I can flash the radio.
I can flash the RIL.
But I have a "P" where the "U" is supposed to be to represent the HSUPA speeds.
If thats the the reason then I don't know.
shugga101 said:
Well I think I found out why I'm getting these speeds. My radio has a "P" and not a "U" like in meiguoguizi's sig. I have the same radio as that (number wise) but he has a "U" and not a "P".
The radios that I can flash have an "x" in that place so won't that just mean it will switch to whatever letter my data is runningo on?
Click to expand...
Click to collapse
I think that U/P thing is determined by one of the settings in the build.prop file. I know it's been discussed before, I just don't recall the details. If you visit the "editing the build.prop file" thread in the dev section, or possibly amongst the comments in the inspire radio thread, I think you might find the specifics in one of those places.
Or browse through henrybravo's posts, I think I remember him explaining it to someone.
Bottom line is that you have the same radio, it's just a setting that's determining the connection type and as a result, that letter changes, depending on that setting.
LeeDroid
Today I flashed the 09.04.11_M2 that is suggested on for LeeDroid 3.2.1 and now I have lost all notification sounds, lockscreen sounds, and keyboard sound feedbacks. Can anyone help?
blippy said:
Today I flashed the 09.04.11_M2 that is suggested on for LeeDroid 3.2.1 and now I have lost all notification sounds, lockscreen sounds, and keyboard sound feedbacks. Can anyone help?
Click to expand...
Click to collapse
First, try another re-flash of the radio.
I did a full wipe and restore and got all the sounds back. Reloaded the RIL and everything works fine.
Sent from my Desire HD using XDA App
Yes the x is a placeholder (remember your algebra).
Open he's right. You have to flash the Riley that goes with the radio and then reboot twice. Make sure you are using the best radio for your Rome.
Sent from my Desire HD using XDA App
Pick_A_Name said:
Yes the x is a placeholder (remember your algebra).
Open he's right. You have to flash the Riley that goes with the radio and then reboot twice. Make sure you are using the best radio for your Rome.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Lol. Autocorrect really has the hots for you.
Lol sorry I was on my mobile and left too much to swift key X. I'll proof read next time!
Pick_A_Name said:
Yes the x is a placeholder (remember your algebra).
Open he's right. You have to flash the Riley that goes with the radio and then reboot twice. Make sure you are using the best radio for your Rome.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Rileys and Romes....I can dig it
Related
BE EXTREMELY CAREFUL WHEN FLASHING OR MODIFYING THE RADIO.IMG AS THIS IS THE EASIEST WAY TO BRICK YOUR PHONE
All of the update.zips work 100% of the time. There has been no report of brick and i have used all of them at least once. if you dont like a new radio flash the old one. Good luck!
the stock radio.img is from the 1.56 RUU for the SPRINT CDMA HERO
There are three Radios here. stock, 2.41.04.02.03, and 2.42.00.03.10. they are in order from release date. high number=newer. radios are risky so i suggest sticking with one. they almost never cause worse performance. if you TRULY feel your signal has degraded i put the stock in here for you to return to.
Update!2 ok so with the new release of 2.42.01.04.27 i was kinda on the ehhh bar with it. i never like new releases because they will always take something from you.
so in this case they have taken the ability to use data with a .27 kernel. so if you flash this radio, you will not get data with any rom that has .27. including the fresh toast 1.1 and all 1.5's. so its up to you. i didnt gain one thing from this radio. battery life and signal stay 100% the same. i did lose data though.
so personally i would stick with 2.42.00.03.10
Please refer to this forum for troubleshooting.
http://forum.xda-developers.com/showthread.php?t=643796&page=10
and refer to this for instructions
http://geekfor.me/faq/flash-radio/
thanks to flipz and co for releasing the new radios.
I'm gonna wait for someone else to try this first
Avalaunchmods said:
BE EXTREMELY CAREFUL WHEN FLASHING OR MODIFYING THE RADIO.IMG AS THIS IS THE EASIEST WAY TO BRICK YOUR PHONE
Here is the stock radio.img
The new radio.img from flipz baseband 2.41.04.02.03
also both update.zip for stock and new.
Please refer to this forum for troubleshooting.
http://forum.xda-developers.com/showthread.php?t=643796&page=10
and refer to this for instructions
http://geekfor.me/faq/flash-radio/
thanks to flipz and co for releasing the new radio.
i do not claim any responsibility for damage done.
Click to expand...
Click to collapse
Just to be sure ... I am only asking this as a precaution as I do not want to brick my phone. These are for the SPRINT CDMA HERO correct? And when you say STOCK you mean the Radio that was originally installed on the SPRINT CDMA HERO like "out of box" so to speak?... Again I'm asking to clear up assumptions. a.k.a. (Click happy readers)
Is this for 1.5 as well or is this to be used only on fresh 2.0b
danimal_01 said:
Just to be sure ... I am only asking this as a precaution as I do not want to brick my phone. These are for the SPRINT CDMA HERO correct? And when you say STOCK you mean the Radio that was originally installed on the SPRINT CDMA HERO like "out of box" so to speak?... Again I'm asking to clear up assumptions. a.k.a. (Click happy readers)
Click to expand...
Click to collapse
this is in the cdma hero forums. so yes sprint hero i believe it has also worked for other cdma heros. the img is the stock radio from phones "with google" on the back.
thanks i wasnt too specific up top i guess i didnt re read lol
H4k3r4r34l said:
Is this for 1.5 as well or is this to be used only on fresh 2.0b
Click to expand...
Click to collapse
only tested on 2.0b but as i have said 1 million times before nandroid runs separate from the ROM. so it shouldnt matter. but it has only been tested on 2.0b
if you would like to test please do and post the results
I updated the radio to 2.41.04.02.02 earlier today and saw my download speeds decrease by about 50%. So I finally tried to flash back the Stock radio posted here. The good news it didn't brick my phone but it also didn't work. My phone still shows version 2.41.04.02.02. When I did the flash of the Stock radio file I never saw any error message and I didn't see the message about extracting radio file. Any ideas? Thanks
rjj1976 said:
I updated the radio to 2.41.04.02.02 earlier today and saw my download speeds decrease by about 50%. So I finally tried to flash back the Stock radio posted here. The good news it didn't brick my phone but it also didn't work. My phone still shows version 2.41.04.02.02. When I did the flash of the Stock radio file I never saw any error message and I didn't see the message about extracting radio file. Any ideas? Thanks
Click to expand...
Click to collapse
did you download the stock radio signed one? only that one will flash right.
justinisyoung said:
did you download the stock radio signed one? only that one will flash right.
Click to expand...
Click to collapse
Yes, that is the one I used.
that's weird.
hey, Avalaunchmods, when you reapplied the stock radio, did you check if it went back to the 1.0.xxxxxx version?
rjj1976 said:
Yes, that is the one I used.
Click to expand...
Click to collapse
hm that is weird. i checked and my baseband changed. ill have to look into it again. just use the stock img and flash it using instructions in the other forum i linked to.
Avalaunchmods said:
hm that is weird. i checked and my baseband changed. ill have to look into it again. just use the stock img and flash it using instructions in the other forum i linked to.
Click to expand...
Click to collapse
Do you mean the instructions on geekforme? If so, that is how I was trying to do it with the stock signed img. Thanks
rjj1976 said:
Do you mean the instructions on geekforme? If so, that is how I was trying to do it with the stock signed img. Thanks
Click to expand...
Click to collapse
well i just retried it with the attached signed stock radio.img and it worked correctly. you may want to double check that in nandroid you are selecting the stock one not the 2.41.04.02.03-signed.zip one
Just tried to restore stock radio, all it says it "Install from SDCard Complete", and baseband is still 2.blahblah..any tips?
scriz said:
Just tried to restore stock radio, all it says it "Install from SDCard Complete", and baseband is still 2.blahblah..any tips?
Click to expand...
Click to collapse
ok i think i know what caused this. although it says its still 2.blahblah its rlly the stock. the manifest isnt right so i guess it didnt apply. ill have a fix up but for right now your set with the stock radio.
It was the Stock img because is was the last one in the list to select. Are you using the instructions from geekforme to do the flash. That is what I was following.
rjj1976 said:
It was the Stock img because is was the last one in the list to select. Are you using the instructions from geekforme to do the flash. That is what I was following.
Click to expand...
Click to collapse
yes you did it right. it should have worked although it still shows the old baseband. you now have the old radio. its not updating that for some reason i will fix once i find out why
Can anyone else confirm decreased data speeds?
I'll do a quick little test in the mean time...
Avalaunchmods said:
yes you did it right. it should have worked although it still shows the old baseband. you now have the old radio. its not updating that for some reason i will fix once i find out why
Click to expand...
Click to collapse
Are you saying that my phone is now using the stock radio ver 1? If you are, I don't think it is because my download speeds are still way slower then before I did the ver 2 update.
Speedtest.net app available in market:
Phone was reset, then ATK was run killing all open apps. Test run at 12:30am so shouldn't be too much tower traffic, although my speeds never fall below 1000kbps
FACTORY RADIO
Test 1 (4/6 bars):
2239kbps down 671kbps up 285ms ping
Test 2 (5/6 bars):
1716kbps down 766kbps up 326ms ping
Test 3 (5/6 bars):
2199kbps down 617kbps up 342ms ping
UPDATED RADIO:
Speedtest.net app on phone.
Test 1 (4/6 bars):
2026kbps down 510kbps up 175ms ping
Test 2 (5/6 bars):
1671kbps down 715kbps up 183ms ping
Test 3 (5/6 bars):
1847kbps down 751kbps up 174ms ping
The decreased ping time is very obvious. Web sites start loading just a hair bit faster. The results are obvious ping times were cut in half!
I just installed Gingbreadman on my phone.
I need some help on doing this.
thanks!
try this:
http://wiki.cyanogenmod.com/index.php?title=HTC_Ace:_Recovery,_Radio_and_CyanogenMod
If you don't understand it or can't figured it out pm me and I can probably help.
P00t said:
I just installed Gingbreadman on my phone.
I need some help on doing this.
thanks!
Click to expand...
Click to collapse
Choose the right radio from here http://forum.xda-developers.com/showthread.php?t=877295
Follow these instructions to flash the radio: http://forum.xda-developers.com/showthread.php?t=896597
How do you know which radio to flash?
Focustom said:
How do you know which radio to flash?
Click to expand...
Click to collapse
If you're on a gingerbread Rom, you flash a gingerbread radio. Otherwise you flash a Cingular radio.
Sent from outer space using XDA App
Focustom said:
How do you know which radio to flash?
Click to expand...
Click to collapse
You don't really, I would go look in the section for whatever rom you flashed. I'm assuming you did rc mix, and then flash a radio from someone who has that same rom and isn't having any problems with it. Thats your best bet.
I'm running Leedroid right now. Does have the best radio for ATT in the US?
Thanks
Newb
Focustom said:
I'm running Leedroid right now. Does have the best radio for ATT in the US?
Thanks
Newb
Click to expand...
Click to collapse
The radio is completely independent of the rom..
ok so the stock radio my best bet? I'm completely lost with radios lol
what does RADIO FLASH DO?
make your wifi connection stronger?
P00t said:
what does RADIO FLASH DO?
make your wifi connection stronger?
Click to expand...
Click to collapse
Looks like you have some reading to do.
rwon said:
Looks like you have some reading to do.
Click to expand...
Click to collapse
Can't you just explain it for us?
Focustom said:
Can't you just explain it for us?
Click to expand...
Click to collapse
Sure, but you will understand it better if you read it your self. Basically flashing a radio can do a few things, one being to enable HSUPA, this can also be accomplished just by flashing certain roms. Also it helps with WIFI, calling(signal, speed etc) problems in some cases. This is all going to depend on which rom you have, the area, the cell provider(i'm assuming your all on ATT like me) and also it varies. I ran the "telus" radio for a long time with RC mix, but with the latest builds of the rom started having problems with the call not connecting when i pressed "call" and failing. I have since switched to the Cyanogen mod rom and am on the latest radio which is listed in my sig. This has improved call quality, battery life(from the rom and radio as a combo), and also call reliability(no dropped calls, calls failing etc) Hope that helps you guys
Is there away to go back to the stock radio if something goes wrong?
If you don't have problems with the stock radio then just stick with it. There's more risk than reward when flashing radio.
Sent from my Desire HD using XDA App
Yeah I have to agree. If you mess up somehow while flashing the radio, your phone will become a paper weight. If its not giving you problems, then no need to flash the radio.
Sent from outer space using XDA App
rwon said:
Sure, but you will understand it better if you read it your self. Basically flashing a radio can do a few things, one being to enable HSUPA, this can also be accomplished just by flashing certain roms. Also it helps with WIFI, calling(signal, speed etc) problems in some cases. This is all going to depend on which rom you have, the area, the cell provider(i'm assuming your all on ATT like me) and also it varies. I ran the "telus" radio for a long time with RC mix, but with the latest builds of the rom started having problems with the call not connecting when i pressed "call" and failing. I have since switched to the Cyanogen mod rom and am on the latest radio which is listed in my sig. This has improved call quality, battery life(from the rom and radio as a combo), and also call reliability(no dropped calls, calls failing etc) Hope that helps you guys
Click to expand...
Click to collapse
Flashing the radio does not enable HSUPA on the Inspire 4G. From what I know, the Captivate requires to flash a different radio to enable HSUPA.
Editing the build.prop enables HSUPA.
modified from Kirk's old post
1. Download this file http://www.megaupload.com/?d=BX5GV1CJ
this is a zip file containing two files. one is radio.img from ATT stock radio, dont touch the other file.
you need to remove this img file and replace with the Gingerbread radio.img
from here http://www.multiupload.com/BE0V4H8QQY
extract the radio.img and zip into the PD98IMG.zip with the other file already in the PD981img.zip. (two files)
2. Place the PD98IMG.zip radio file on the root of your SD card.
3. Power the phone off, remove and reinsert the battery.
4. Hold the volume button down and press power on.
5. The phone will boot into Hboot then Bootloader, It should see the PD98IMG.zip and ask if you want to apply the zip.
6. Use the volume up button to select "yes"
7. Once its done flashing, reboot the phone and you should have flashed the radio.
I hope I get some credit from my post. Lol
Sent from outer space using XDA App
kirk123 said:
I hope I get some credit from my post. Lol
Sent from outer space using XDA App
Click to expand...
Click to collapse
Credits go to you Kirk! thanks
your method can flash any radio
I flashed my radio to (baseband version):
12.41.60.19U_26.06.04.14_M
I'm having severe issues with my connection.
I have 0 bars on some locations, where as an iPhone, or a non-smartphone, has 3+, or full bars at the same location.
Is this the radio issue, or is this the physical antenna of the phone being bad?
what rom you have?
I use that radio with saga and I get great reception. With stock I was getting -90 to -100 at home. I get - 70 now.
Sent from my Inspire 4G using XDA Premium App
Did you flash the corresponding ril?
I use that radio and got an average of 6 db better signal than I did with the stocker in south Florida USA.. I also use a gingerbread Rom. Btw never use bars to determine signal strength, its subjective at best. Go to menu,about phone,network to see signal strength.
I recommend reading the radio thread in the sticky under development. It's a great thread. Good luck to you.
Sent from my Desire HD using XDA App
Junsuo said:
what rom you have?
Click to expand...
Click to collapse
My apologies. I'm using RCMixHD v5.3.5.
mj0528 said:
I use that radio with saga and I get great reception
Click to expand...
Click to collapse
Yea, that's the general consensus, which is why I decided to flash my radio, but I'm getting terrible service everywhere... "NO SERVICE" or "LIMITED SERVICE" message on my screen, while an iPhone or a messaging phone has several bars.
stickbo said:
Did you flash the corresponding ril?
Click to expand...
Click to collapse
I did:
pollux1151 said:
simplest way for radio flashing
modified from Kirk's old post
1. Download this file http://www.megaupload.com/?d=BX5GV1CJ
this is a zip file containing two files. one is radio.img from ATT stock radio, dont touch the other file (android-info).
you need to remove this img file and replace with the Gingerbread radio.img
from here http://www.multiupload.com/BE0V4H8QQY
extract the radio.img and zip into the PD98IMG.zip with the other file (android-info) already in the PD981img.zip. (two files)
2. Place the PD98IMG.zip radio file on the root of your SD card.
3. Power the phone off, remove and reinsert the battery.
4. Hold the volume button down and press power on.
5. The phone will boot into Hboot then Bootloader, It should see the PD98IMG.zip and ask if you want to apply the zip.
6. Use the volume up button to select "yes"
7. Once its done flashing, reboot the phone and you should have flashed the radio.
Click to expand...
Click to collapse
try the stock radio with RCMix HD (12.39.60.19_26.06.04.06_M) i use this radio when i have installed RCMix rom
I tried this without luck something about invalid image it scrolls by too fast to read. It is the first thing I have tried on my new inspire. I have been having major signal issues.
Help.
Thanks!
wshealy said:
I tried this without luck something about invalid image it scrolls by too fast to read. It is the first thing I have tried on my new inspire. I have been having major signal issues.
Help.
Thanks!
Click to expand...
Click to collapse
Try reflashing your radio using this method:
http://forum.xda-developers.com/showthread.php?t=1002226
I've had major issues with my GPS and from what I've been reading, reflashing the radio could help. I dl'ed the pd98img, placed it on the root of SD, booted to hboot but it never finds the file.
Any ideas as to what might he goin on? Fwiw, it takes about 10 minutes to go through all the steps till I can reboot back to os.
Halp,
Tx
this has gotton significantly worse....is there any fix to this? Im currently stock. Does rooting fix? plz help
This is due to the radio on your phone, it's really bad in up here in Canada from what I have read, if you root your phone and use KB3 it will quit doing that, at lease it has stopped on both of my phones, seems it only happens in bad service areas.
What search button bug?
I got my Nexus from Canada and had the same problem.
Like the other dude said, rooting and flashing a ROM is the only way around it. You won't have any problems after that.
Sent from my MB860 using XDA App
well i like the stock rom on the nexus do you think i could root and then just disable the search button to do nothing? ALso, i'd love to do a new radio but i screwed up my first phone that i had once by doing something wrong and now i have somehwat of a fear of flashing radios.
JGAGNON10 said:
well i like the stock rom on the nexus do you think i could root and then just disable the search button to do nothing? ALso, i'd love to do a new radio but i screwed up my first phone that i had once by doing something wrong and now i have somehwat of a fear of flashing radios.
Click to expand...
Click to collapse
Can't disable that button, the radio is fairly safe to flash on this phone. I do it lots, best thing to do is download the radio, and get the md5 hash and if that matches you're golden.
Sent from my *****'n Nexus S.
Oh ya, when you root you don't have to change from your stock rom.
Sent from my *****'n Nexus S.
ok i plan on rooting tonight....and i guess ill do the radio.... im a total noob at this so can you point me in a very dumbed down version on how to flash the radio and also which radio to flash? Any help is greatly appreciated
http://forum.xda-developers.com/showpost.php?p=14564429&postcount=1
[RADIO/GUIDE] Radio JK1, KB1, KB2, KB3, KD1 and UCKD1
You want to get kb3 that one seems to fix it. You will flash it with clockwork after you root.
Sent from my *****'n Nexus S.
Edit, link didn't work out from the app.
ok so just to be very clear, first i root the phone (no new rom). Then i just put the zip file onto the root of the sd card, and go into fast boot or whatever its called, select from sd and flash it? is it as simple as that?
JGAGNON10 said:
ok so just to be very clear, first i root the phone (no new rom). Then i just put the zip file onto the root of the sd card, and go into fast boot or whatever its called, select from sd and flash it? is it as simple as that?
Click to expand...
Click to collapse
You will unlock it with adb, install clockwork mod, then su to root it, then yes, just put the radio on your sdcard and flash it through clockwork mod. Make sure you know the model of your phone to, it's under battery.
This is the md5 hash I get for the KB3 radio under the "Radio for I9020a/I9020T/I9023" heading.
4e9c9cf4d6470be800e00f8508b9c175 Radio Nexus S [XXKB3].zip
Just to double check if your paranoid, download the Radio and a md5 checker and if your numbers match mine your good.
see what you just said there confused the hell outta me lol....what do u mean flash radio with the clockwork mod? And those numbers im not sure what that meant
JGAGNON10 said:
see what you just said there confused the hell outta me lol....what do u mean flash radio with the clockwork mod? And those numbers im not sure what that meant
Click to expand...
Click to collapse
Read the stickies.
Quick primer:
After you get root, you can replace the recovery partition of your phone with clockworkmod. That's the "flash recovery" part. This gives you a pre-boot working environment that lets you flash ZIP files (ROMs, kernels, boot animations, radio images, etc), make backups, wipe data, etc. Using clockwork recovery you can flash a new radio firmware which apparently fixes the problem.
JGAGNON10 said:
see what you just said there confused the hell outta me lol....what do u mean flash radio with the clockwork mod? And those numbers im not sure what that meant
Click to expand...
Click to collapse
Clockwork Mod is the recovery you will install when you go to root your device, the numbers is the md5 hash, when you download a file you can check the md5 to see if it is corrupt in any way.
umm ok i rooted via one click root mechanism....how do i apply zip from sd card now? i dl'd rom manager and flashed clockwork mod. Now what
Shut down your phone, hold up volume and press and hold power button until you see a screen with your phone info, then use volume key to select recovery and hit power button to select it. You should be in clock work then, go to install zip from sd card
Sent from my *****'n Nexus S.
I hate to be the bearer of bad news, but rooting and/or flashing a radio will not solve this issue.
What you are describing is a known issue and it is a hardware defect. The touch buttons sometimes incorrectly register a long-press and execute long-press behavior. It affects different buttons on different phones. On phones where the search button is affected, you see long-press behavior of voice search opening. On my phone, back button is affected, so I see long-press of back button behavior. It seems to stop after ten seconds. And sometimes home button is affected, and I see the "recent apps" screen appear.
You can read about the issue here:
http://www.google.com/support/forum/p/Google+Mobile/thread?hl=en&tid=49e8ca84071d51a4
http://www.google.com/support/forum/p/Google+Mobile/thread?hl=en&tid=455215ff8747658b
Maybe you should do some more reading. The radio will fix it.
Hence my two fixed button freaking phones.
Sent from my *****'n Nexus S.
radio flashed and problem solved thanks for ur help guys
i have a htc inspire 4g i rooted it yesterday and installed cyanogenmod7 when it rebooted it shows htc screen then changed to like a gold and fade to black the screen is lit up but no picture i can even get it to go into recovery or anything when i go to recovery and click on it it does the same as when i power it on does anyone know how to fix this PLEASE HELP not to go with computers or phones
Roehrig1 said:
i have a htc inspire 4g i rooted it yesterday and installed cyanogenmod7 when it rebooted it shows htc screen then changed to like a gold and fade to black the screen is lit up but no picture i can even get it to go into recovery or anything when i go to recovery and click on it it does the same as when i power it on does anyone know how to fix this PLEASE HELP not to go with computers or phones
Click to expand...
Click to collapse
Please search....
There was no reason for you to root without first reading everything. Also there was no reason to root if your not good with phones or computers....just sayin. Please search.
I got your 10 char right here
Wow man best advice is the one given above. I searched for weeks for all issues before I tempted to root. Then days for the issues on custom ROMs. As well as radios. I dont bother with anything else but those. I would say get the rooted ATT ROM (PD98IMG) file, pull battery out of phone then put back, then boot into bootloader by holding volume down and power button at same time. If phone goes to bootloader it will recognize the PD98IMG zip and load it. it will ask if you want to install, just hit volume up for yes and it will do its thing. I couldn't find the page for the ROM so I loaded mine to megaupload it includes the radio -26.10.04.03_M. If you find it in Development Section dont forget to THANK the developer, I TAKE NO CREDIT FO IT. Just place zip file in root of phone micro sd card (not in a folder). (I always use the gold card I made to root the phone). You may have to take card out of phone and use adapter to place zip in itthen put back into phone. AS ALWAYS ON HERE FLASH AT YOUR OWN RISK.
AGAIN AS ADVICED ABOVE " RESEARCH" before anything.
http://www.megaupload.com/?d=Q6YYQFIM
Hope it helps
Heres the page
http://forum.xda-developers.com/showthread.php?t=1191949
If rooted use this method if not rooted try Lordpipa's method below.
PD98IMG is not a ROM, it's a radio file. Incorrectly telling him to flash this may brick his phone. Be sure you know what you're talking about before you post help.
pazzo02 said:
PD98IMG is not a ROM, it's a radio file. Incorrectly telling him to flash this may brick his phone. Be sure you know what you're talking about before you post help.
Click to expand...
Click to collapse
He is talking about the s-on stock method. And yes he could do this and then try the hack kit. Then boot into recovery and flash cm7. Maybe it was a bad flash. But yes he should search, for the above info, but remember this is q/a. We were all noobs, and still have lots to learn.
Sent from my Inspire 4G using xda premium
Here's the link to the s-on method.
http://forum.xda-developers.com/showthread.php?t=1208507 hope this works for you. Tnx to GenePoole for it it has done wonders for me.
Sent from my Inspire 4G using xda premium
pazzo02 said:
PD98IMG is not a ROM, it's a radio file. Incorrectly telling him to flash this may brick his phone. Be sure you know what you're talking about before you post help.
Click to expand...
Click to collapse
Just a fyi...a PD98ING file is not always a radio file. Naming a file that's tells hboot to flash that file.
Splash screen downloads are named that as well. But back to what I said before. Please search.
I got your 10 char right here
cwhitney24 said:
Just a fyi...a PD98ING file is not always a radio file. Naming a file that's tells hboot to flash that file.
Splash screen downloads are named that as well. But back to what I said before. Please search.
I got your 10 char right here
Click to expand...
Click to collapse
What Whitney said, lol.
Sent from my Inspire 4G using xda premium
pazzo02 said:
PD98IMG is not a ROM, it's a radio file. Incorrectly telling him to flash this may brick his phone. Be sure you know what you're talking about before you post help.
Click to expand...
Click to collapse
Dude the PD98 zip file I put up is Pooles rooted ATT ROM with the .03 Radio. I know what I uploaded on here. So when I put something on here I know what Im putting up. I would not tell someone to flash something I dont know what it is. So please as adviced here SEARCH-SEARCH-SEARCH as I did.
Sorry, my bad. I didn't read your post thoroughly, plus I had radio files on the brain.
pazzo02 said:
Sorry, my bad. I didn't read your post thoroughly, plus I had radio files on the brain.
Click to expand...
Click to collapse
No problem