Database Info

(Radio) All radio.img and update.zips Update-2!READ

BE EXTREMELY CAREFUL WHEN FLASHING OR MODIFYING THE RADIO.IMG AS THIS IS THE EASIEST WAY TO BRICK YOUR PHONE
All of the update.zips work 100% of the time. There has been no report of brick and i have used all of them at least once. if you dont like a new radio flash the old one. Good luck!
the stock radio.img is from the 1.56 RUU for the SPRINT CDMA HERO
There are three Radios here. stock, 2.41.04.02.03, and 2.42.00.03.10. they are in order from release date. high number=newer. radios are risky so i suggest sticking with one. they almost never cause worse performance. if you TRULY feel your signal has degraded i put the stock in here for you to return to.
Update!2 ok so with the new release of 2.42.01.04.27 i was kinda on the ehhh bar with it. i never like new releases because they will always take something from you.
so in this case they have taken the ability to use data with a .27 kernel. so if you flash this radio, you will not get data with any rom that has .27. including the fresh toast 1.1 and all 1.5's. so its up to you. i didnt gain one thing from this radio. battery life and signal stay 100% the same. i did lose data though.
so personally i would stick with 2.42.00.03.10
Please refer to this forum for troubleshooting.
http://forum.xda-developers.com/showthread.php?t=643796&page=10
and refer to this for instructions
http://geekfor.me/faq/flash-radio/
thanks to flipz and co for releasing the new radios.

I'm gonna wait for someone else to try this first

Avalaunchmods said:
BE EXTREMELY CAREFUL WHEN FLASHING OR MODIFYING THE RADIO.IMG AS THIS IS THE EASIEST WAY TO BRICK YOUR PHONE
Here is the stock radio.img
The new radio.img from flipz baseband 2.41.04.02.03
also both update.zip for stock and new.
Please refer to this forum for troubleshooting.
http://forum.xda-developers.com/showthread.php?t=643796&page=10
and refer to this for instructions
http://geekfor.me/faq/flash-radio/
thanks to flipz and co for releasing the new radio.
i do not claim any responsibility for damage done.
Click to expand...
Click to collapse
Just to be sure ... I am only asking this as a precaution as I do not want to brick my phone. These are for the SPRINT CDMA HERO correct? And when you say STOCK you mean the Radio that was originally installed on the SPRINT CDMA HERO like "out of box" so to speak?... Again I'm asking to clear up assumptions. a.k.a. (Click happy readers)

Is this for 1.5 as well or is this to be used only on fresh 2.0b

danimal_01 said:
Just to be sure ... I am only asking this as a precaution as I do not want to brick my phone. These are for the SPRINT CDMA HERO correct? And when you say STOCK you mean the Radio that was originally installed on the SPRINT CDMA HERO like "out of box" so to speak?... Again I'm asking to clear up assumptions. a.k.a. (Click happy readers)
Click to expand...
Click to collapse
this is in the cdma hero forums. so yes sprint hero i believe it has also worked for other cdma heros. the img is the stock radio from phones "with google" on the back.
thanks i wasnt too specific up top i guess i didnt re read lol

H4k3r4r34l said:
Is this for 1.5 as well or is this to be used only on fresh 2.0b
Click to expand...
Click to collapse
only tested on 2.0b but as i have said 1 million times before nandroid runs separate from the ROM. so it shouldnt matter. but it has only been tested on 2.0b
if you would like to test please do and post the results

I updated the radio to 2.41.04.02.02 earlier today and saw my download speeds decrease by about 50%. So I finally tried to flash back the Stock radio posted here. The good news it didn't brick my phone but it also didn't work. My phone still shows version 2.41.04.02.02. When I did the flash of the Stock radio file I never saw any error message and I didn't see the message about extracting radio file. Any ideas? Thanks

rjj1976 said:
I updated the radio to 2.41.04.02.02 earlier today and saw my download speeds decrease by about 50%. So I finally tried to flash back the Stock radio posted here. The good news it didn't brick my phone but it also didn't work. My phone still shows version 2.41.04.02.02. When I did the flash of the Stock radio file I never saw any error message and I didn't see the message about extracting radio file. Any ideas? Thanks
Click to expand...
Click to collapse
did you download the stock radio signed one? only that one will flash right.

justinisyoung said:
did you download the stock radio signed one? only that one will flash right.
Click to expand...
Click to collapse
Yes, that is the one I used.

that's weird.
hey, Avalaunchmods, when you reapplied the stock radio, did you check if it went back to the 1.0.xxxxxx version?

rjj1976 said:
Yes, that is the one I used.
Click to expand...
Click to collapse
hm that is weird. i checked and my baseband changed. ill have to look into it again. just use the stock img and flash it using instructions in the other forum i linked to.

Avalaunchmods said:
hm that is weird. i checked and my baseband changed. ill have to look into it again. just use the stock img and flash it using instructions in the other forum i linked to.
Click to expand...
Click to collapse
Do you mean the instructions on geekforme? If so, that is how I was trying to do it with the stock signed img. Thanks

rjj1976 said:
Do you mean the instructions on geekforme? If so, that is how I was trying to do it with the stock signed img. Thanks
Click to expand...
Click to collapse
well i just retried it with the attached signed stock radio.img and it worked correctly. you may want to double check that in nandroid you are selecting the stock one not the 2.41.04.02.03-signed.zip one

Just tried to restore stock radio, all it says it "Install from SDCard Complete", and baseband is still 2.blahblah..any tips?

scriz said:
Just tried to restore stock radio, all it says it "Install from SDCard Complete", and baseband is still 2.blahblah..any tips?
Click to expand...
Click to collapse
ok i think i know what caused this. although it says its still 2.blahblah its rlly the stock. the manifest isnt right so i guess it didnt apply. ill have a fix up but for right now your set with the stock radio.

It was the Stock img because is was the last one in the list to select. Are you using the instructions from geekforme to do the flash. That is what I was following.

rjj1976 said:
It was the Stock img because is was the last one in the list to select. Are you using the instructions from geekforme to do the flash. That is what I was following.
Click to expand...
Click to collapse
yes you did it right. it should have worked although it still shows the old baseband. you now have the old radio. its not updating that for some reason i will fix once i find out why

Can anyone else confirm decreased data speeds?
I'll do a quick little test in the mean time...

Avalaunchmods said:
yes you did it right. it should have worked although it still shows the old baseband. you now have the old radio. its not updating that for some reason i will fix once i find out why
Click to expand...
Click to collapse
Are you saying that my phone is now using the stock radio ver 1? If you are, I don't think it is because my download speeds are still way slower then before I did the ver 2 update.

Speedtest.net app available in market:
Phone was reset, then ATK was run killing all open apps. Test run at 12:30am so shouldn't be too much tower traffic, although my speeds never fall below 1000kbps
FACTORY RADIO
Test 1 (4/6 bars):
2239kbps down 671kbps up 285ms ping
Test 2 (5/6 bars):
1716kbps down 766kbps up 326ms ping
Test 3 (5/6 bars):
2199kbps down 617kbps up 342ms ping
UPDATED RADIO:
Speedtest.net app on phone.
Test 1 (4/6 bars):
2026kbps down 510kbps up 175ms ping
Test 2 (5/6 bars):
1671kbps down 715kbps up 183ms ping
Test 3 (5/6 bars):
1847kbps down 751kbps up 174ms ping
The decreased ping time is very obvious. Web sites start loading just a hair bit faster. The results are obvious ping times were cut in half!

Rooted and no HSUPA? Read this for my theory and a possible fix.

I think some of these rooting programs/routines like Bubby's root are causing the loss of hsupa. See my post here about it: http://forum.xda-developers.com/showpost.php?p=12828255&postcount=2961

I extracted the radio.img from the PD98IMG.zip file in the \ace\tools\dngrd\ folder from the hack kit. I opened it up in a hex editor and found the version - 26.03.02.26
You can download the radio in PD98IMG.zip form from here: http://wiki.cyanogenmod.com/index.php?title=Support_Downloads#HTC_Ace
So now we just need someone whose HSUPA is not working to downgrade to this radio and see if HSUPA comes back. If it does, then you can flash to 26.06.04.14 or 26.08.03.07 from the same link above.

I am thinking you may be onto something..........
I flashed the downgrade radio. Upload speeds still slower than before I flashed the stock radio. Now I am going back to the radio I had before stock and see what happens.

darkside1904 said:
I am thinking you may be onto something..........
I flashed the downgrade radio. Upload speeds still slower than before I flashed the stock radio. Now I am going back to the radio I had before stock and see what happens.
Click to expand...
Click to collapse
This is interesting. Let us know.
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.

Maybe you need to flash the downgraded kernel from the hack kit as well? Does anyone know if that would even work - flashing the downgraded kernel on top of a custom rom like cm7 or mui?

EvoXOhio said:
Maybe you need to flash the downgraded kernel from the hack kit as well? Does anyone know if that would even work - flashing the downgraded kernel on top of a custom rom like cm7 or mui?
Click to expand...
Click to collapse
Not a good idea. Flashing froyo kernel on a gb rom
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.

lrs421 said:
Not a good idea. Flashing froyo kernel on a gb rom
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
Click to expand...
Click to collapse
worst case scenario, wouldnt it just prevent android from booting up? if so, you could always put the correct kernel on the SD cad and reflash it from recovery right?

Per the hack kit thread: http://forum.xda-developers.com/showthread.php?t=952352
I believe the kernel he links to in there is the downgraded Telus kernel: http://forum.xda-developers.com/attachment.php?attachmentid=518730&d=1297824204
EDIT: I believe its the boot.img in the hack kit in he \ace\tools\dngrd\ folder as well.

Before I went back to stock I was Uploading @ 1.50Mbps. Went to stock radio because of the ROM I am on and my Upload speeds won't go over .30Mbps. Using the downgrade radio didn't help. It was a good idea.

darkside1904 said:
Before I went back to stock I was Uploading @ 1500Mbps. Went to stock radio because of the ROM I am on and my Upload speeds won't go over .30Mbps. Using the downgrade radio didn't help. It was a good idea.
Click to expand...
Click to collapse
I had the exact same issue. Like I said re-rooting fixed the issue for me. I was thinking that loading the downgraded radio would fix it, but maybe you need the downgraded kernel as well?
did you confirm it was the downgraded radio in "about phone"

Yeah, that was the first thing I did. Check to make sure the radio flashed correctly. I have to go put the kids in bed now. I am pretty bummed about my new slow upload speed.

darkside1904 said:
Yeah, that was the first thing I did. Check to make sure the radio flashed correctly. I have to go put the kids in bed now. I am pretty bummed about my new slow upload speed.
Click to expand...
Click to collapse
You'll have to flash back to stock and reroot to get it back
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.

lrs421 said:
You'll have to flash back to stock and reroot to get it back
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
Click to expand...
Click to collapse
There has to be an easier way. I can confirm that HSUPA came back for me after the downgrade, before I rooted or flashed another ROM. I've looked through the hack kit and what gets pushed to the phone during the downgrade, there's not a lot of files in there:
android-info.txt
boot.img
hboot_7230_0.85.0007_101011.nb0
radio.img
rcdata.img
recovery.img
splash1.nb0
splash2.nb0
system.img
tp_ACE_SYN3KT0108.img
tp_ACE_SYN3KW020B.img
tp_atmel224_20aa.img
tp_atmelc12_20aa.img
userdata.img
We've tried radio.img and that didn't do it, m next guess would be boot.img, which is the kernel if I'm not mistaken. I am not sure what all the other files do specifically.

I like your dedication. We'll figure this out...
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.

So this guy claims to have fixed the HSUPA issue simply by reflashing the downgraded radio: http://forum.xda-developers.com/showpost.php?p=11847379&postcount=17
Maybe it's because he flashed radio.img directly instead of the PD98IMG.zip method?

I see we are still trying to figure this out???

darkside1904 said:
Yeah, that was the first thing I did. Check to make sure the radio flashed correctly. I have to go put the kids in bed now. I am pretty bummed about my new slow upload speed.
Click to expand...
Click to collapse
For a quick test, can you reboot the phone again? I know when you edit build.prop, most people say it takes two reboots for it to take effect. Maybe just for the hell of it, reboot a second time and then try another speedtest? It's probably worth a try.
lrs421 said:
I like your dedication. We'll figure this out...
Click to expand...
Click to collapse
Thanks. I got mine working but it involved going through the hack kit and losing all my data and then having to re-root and all of that. I'd love to find out what part of the PD98IMG.zip file fixed the issue, so that hopefully people can flash just that and fix their issue without losing data, re-rooting, reflashing ROMs, etc.
I am half tempted to purposely break my HSUPA just to figure out the fix but I'm not feeling that masochistic just yet.

Right now I am back to the stock radio and looking into some things. I will be back in a bit, hopefully with some info.

darkside1904 said:
Right now I am back to the stock radio and looking into some things. I will be back in a bit, hopefully with some info.
Click to expand...
Click to collapse
Cool good luck. I wish I would have caught you in time to try the second reboot. Maybe you will be brave enough to reflash the downgraded radio and then also do the downgraded Telus kernel?
I am going to read up on what all of these files in PD98IMG.zip do. Maybe the answer is in one of those other files.

So after reading up on the files some more, I now believe it could be rcdata.img, which has something to do with controlling the radio. I opened it up in a text editor and its a small file that contains a handful of line:
QCT_UMTS_RADIO_VER=1
DisH=2
HSDPACat=10
HSUPACat=6
QCT_UMTS_RADIO_END=1
That's the entire file. What I posted there is the one from the downgraded radio in the hack kit. Maybe this file needs to be reflashed in conjunction with the downgraded radio? In theory you could open up the PD98IMG.zip file that you downloaded for the downgraded radio, and then add the rcdata.img from the hack kit to the PD98IMG.zip file, and then flash PD98IMG.zip and it should flash both the radio and the rcdata.

Radio question.

I flashed my radio to (baseband version):
12.41.60.19U_26.06.04.14_M
I'm having severe issues with my connection.
I have 0 bars on some locations, where as an iPhone, or a non-smartphone, has 3+, or full bars at the same location.
Is this the radio issue, or is this the physical antenna of the phone being bad?

what rom you have?

I use that radio with saga and I get great reception. With stock I was getting -90 to -100 at home. I get - 70 now.
Sent from my Inspire 4G using XDA Premium App

Did you flash the corresponding ril?
I use that radio and got an average of 6 db better signal than I did with the stocker in south Florida USA.. I also use a gingerbread Rom. Btw never use bars to determine signal strength, its subjective at best. Go to menu,about phone,network to see signal strength.
I recommend reading the radio thread in the sticky under development. It's a great thread. Good luck to you.
Sent from my Desire HD using XDA App

Junsuo said:
what rom you have?
Click to expand...
Click to collapse
My apologies. I'm using RCMixHD v5.3.5.
mj0528 said:
I use that radio with saga and I get great reception
Click to expand...
Click to collapse
Yea, that's the general consensus, which is why I decided to flash my radio, but I'm getting terrible service everywhere... "NO SERVICE" or "LIMITED SERVICE" message on my screen, while an iPhone or a messaging phone has several bars.
stickbo said:
Did you flash the corresponding ril?
Click to expand...
Click to collapse
I did:
pollux1151 said:
simplest way for radio flashing
modified from Kirk's old post
1. Download this file http://www.megaupload.com/?d=BX5GV1CJ
this is a zip file containing two files. one is radio.img from ATT stock radio, dont touch the other file (android-info).
you need to remove this img file and replace with the Gingerbread radio.img
from here http://www.multiupload.com/BE0V4H8QQY
extract the radio.img and zip into the PD98IMG.zip with the other file (android-info) already in the PD981img.zip. (two files)
2. Place the PD98IMG.zip radio file on the root of your SD card.
3. Power the phone off, remove and reinsert the battery.
4. Hold the volume button down and press power on.
5. The phone will boot into Hboot then Bootloader, It should see the PD98IMG.zip and ask if you want to apply the zip.
6. Use the volume up button to select "yes"
7. Once its done flashing, reboot the phone and you should have flashed the radio.
Click to expand...
Click to collapse

try the stock radio with RCMix HD (12.39.60.19_26.06.04.06_M) i use this radio when i have installed RCMix rom

I tried this without luck something about invalid image it scrolls by too fast to read. It is the first thing I have tried on my new inspire. I have been having major signal issues.
Help.
Thanks!

wshealy said:
I tried this without luck something about invalid image it scrolls by too fast to read. It is the first thing I have tried on my new inspire. I have been having major signal issues.
Help.
Thanks!
Click to expand...
Click to collapse
Try reflashing your radio using this method:
http://forum.xda-developers.com/showthread.php?t=1002226

I've had major issues with my GPS and from what I've been reading, reflashing the radio could help. I dl'ed the pd98img, placed it on the root of SD, booted to hboot but it never finds the file.
Any ideas as to what might he goin on? Fwiw, it takes about 10 minutes to go through all the steps till I can reboot back to os.
Halp,
Tx

[Q] Remove RIL?

So I tried to update to the latest Radio for ATT. I was getting a 2Mb up connection.
I tried getting the RIL for this as well via
http://www.megaupload.com/?f=YCU9JUCT
Once I flashed the RIL I'm lucky to get .55Mb up
Is there a way to remove the RIL? I've looked around and have yet to find a way. I've tried reflashing the radio and downgrading the the stock one...which got me 1Mb-ish. And then putting back on the newest ATT radio.
Help please!

Terrold said:
So I tried to update to the latest Radio for ATT. I was getting a 2Mb up connection.
I tried getting the RIL for this as well via
http://www.megaupload.com/?f=YCU9JUCT
Once I flashed the RIL I'm lucky to get .55Mb up
Is there a way to remove the RIL? I've looked around and have yet to find a way. I've tried reflashing the radio and downgrading the the stock one...which got me 1Mb-ish. And then putting back on the newest ATT radio.
Help please!
Click to expand...
Click to collapse
The RIL is flashed separately from the radio. Typically you will get the best connections by having a matched set. If you want the newest radio and RIL for AT&T, click the top link in my sig and go to the second post. It has them in one zip file you can extract.

So run the radio as a PD98IMG through hboot and then flash the RIL? Just wanna make sure I'm doing it correctly.
Edit: So I went to the link and answered my own question. Thanks!

So I had the problem where I was not provided a locked APN. I chose menu and reset to default and it gave me the stock att one. And my speeds are worse then before.

Run a nandroid backup, then flash attn1's pd98img ROM. see if that changes anything.
Sent from my Inspire 4G using XDA Premium App

Terrold said:
So run the radio as a PD98IMG through hboot and then flash the RIL? Just wanna make sure I'm doing it correctly.
Click to expand...
Click to collapse
Yep, easy as pie. I would recommend reading up on radios before you flash them. Sometimes the newest one isn't the best performing.

Yeah I'm back to stock. I couldn't find one that was recommended for cm7. And I get 3down and like 1.5 up or so. Can't complain. Its all a learning experience though.
Sent from my Desire HD using XDA Premium App

HTC Noob Question about Radio Flashing

I've seen devs mention to flash a radio from Hboot and Fast boot before. Are these terms synonymous? Fast boot is accessed from Hboot correct? I've flashed a radio a few times, but never understood the terminology. A PD98IMG is always flashed the same way from what I understand.

More or less correct. HBoot flashing is done with the PD98IMG.zip on the SDcard. PD98IMG.zip can contain any number of images to be flashed. Fastboot flashing is done using the fastboot.exe and can flash a single image.

Gene Poole said:
More or less correct. HBoot flashing is done with the PD98IMG.zip on the SDcard. PD98IMG.zip can contain any number of images to be flashed. Fastboot flashing is done using the fastboot.exe and can flash a single image.
Click to expand...
Click to collapse
I've never quite understood what the advantage is to fastboot flashing. Then again, I've never truly understood fastboot in general.
Something I definitely need to do more reading on.

I've tried several times, and several methods to flash my radio to the 12.54.60.25_26.09.04.11_M2 radio img. And nothing seems to be working. My best guess is its user error. I'm a noob and trying to learn how to flash my radio. I currently have the 12.39.30.19P-26.06.04_M with the TPGB-Ninja_0618 ROM and [email protected] #28 kernel.
I've done the method where i go into adb to access bootloader, then i flash the radio.img then reboot the phone and that doesnt work. I've tried running the radio.img though CWM and that didn't work.
If I power off my phone and then hold power and -vol down to get into the bootloader it automatically will go into hboot and start to run through the PD98IMG.zip. I'm wondering.
Do I need that .zip folder on my sdcard forever or can I get rid of it?
Also, can I just switch out radio.img in the PD98IMG.zip with the new radio.img?
Can I do the above question without having all the other .img 's in the .zip folder?
I've done some research, but haven't found my answers, or was able to fix my problem.
So hopefully someone can help me.
Please be gentle with me, I'm new to this type of thing, but a fast learner.
Thanks in advance

shugga101 said:
I've tried several times, and several methods to flash my radio to the 12.54.60.25_26.09.04.11_M2 radio img. And nothing seems to be working. My best guess is its user error. I'm a noob and trying to learn how to flash my radio. I currently have the0 12.39.30.19P-26.06.04_M with the TPGB-Ninja_0618 ROM and [email protected] #28 kernel.
I've done the method where i go into adb to access bootloader, then i flash the radio.img then reboot the phone and that doesnt work. I've tried running the radio.img though CWM and that didn't work.
If I power off my phone and then hold power and -vol down to get into the bootloader it automatically will go into hboot and start to run through the PD98IMG.zip. I'm wondering.
Do I need that .zip folder on my sdcard forever or can I get rid of it?
Also, can I just switch out radio.img in the PD98IMG.zip with the new radio.img?
Can I do the above question without having all the other .img 's in the .zip folder?
I've done some research, but haven't found my answers, or was able to fix my problem.
So hopefully someone can help me.
Please be gentle with me, I'm new to this type of thing, but a fast learner.
Thanks in advance
Click to expand...
Click to collapse
Assuming the PD98IMG.zip containing the radio flashes properly, you can remove it afterwards.
Have you checked out the inspire only radio thread in the dev section, yet?
There's already a ready-to-flash PD98IMG.zip for the radio you want to flash on that thread.
Download it from that thread, verify the MD5 checksum, plop it in the root directory of your SD card, reboot into hboot/bootloader, once it finds the PD98IMG.zip, confirm the update, and away you go.

Ok I'll try that as soon as I get to my computer. Thanks for the reply and I'll let you know how it goes.
Sent from my Inspire 4G using XDA App

shugga101 said:
Ok I'll try that as soon as I get to my computer. Thanks for the reply and I'll let you know how it goes.
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
Just don't forget to check that MD5. I have had incomplete (meaning...BAD) radio downloads on a solid WiFi connection, so it DOES happen from time to time.

Scott_S said:
Just don't forget to check that MD5. I have had incomplete (meaning...BAD) radio downloads on a solid WiFi connection, so it DOES happen from time to time.
Click to expand...
Click to collapse
I was able to flash the radio, but all that work for nothing. I actually got worse data. But then again I could of done something wrong again.

shugga101 said:
I was able to flash the radio, but all that work for nothing. I actually got worse data. But then again I could of done something wrong again.
Click to expand...
Click to collapse
Couple of things. 1) Be sure to give the radio long enough to "warm up"...I'ave had it take several hours after flashing before I started getting decent speeds from a radio I know works. 2) It is usually recommended to keep a copy of your radio flash on your SD card in case you need it (GPS fail, etc., ) so you can reflash if you are away from a PC, but not keep it in the root of your SD. It's very possible to end up in a continuous boot loop until you somehow either get the file off your root (SD card reader) or fool the phone into thinking it isn't there by pulling the SD card when you pull the battery to recover (I've only heard the last trick works)...

shugga101 said:
I was able to flash the radio, but all that work for nothing. I actually got worse data. But then again I could of done something wrong again.
Click to expand...
Click to collapse
You've also made sure you have the appropriate RIL for the new radio you flashed, correct? That radio thread also has the RILs + info about them, as well.
Also try rebooting more than once after flashing a radio/ril, just for good measure.
When I first flashed the 04_11_M2 radio, I had only rebooted once, as a result of the flashing process. Once my phone was done loading up, I received my first call with it, the caller couldn't hear me, but I could hear them. Caller tried calling back. Same thing. I decided to give it another flash and reboot. I called that person back, and it was working, never experienced that since.
Coincidence? Who knows? But radios are weird, quirky things that seem to need a little "voodoo" type flashing/rebooting to kick them in, I suspect.

Well I think I found out why I'm getting these speeds. My radio has a "P" and not a "U" like in meiguoguizi's sig. I have the same radio as that (number wise) but he has a "U" and not a "P".
The radios that I can flash have an "x" in that place so won't that just mean it will switch to whatever letter my data is running on?

I think I found out why I am having this problem.
I can flash the radio.
I can flash the RIL.
But I have a "P" where the "U" is supposed to be to represent the HSUPA speeds.
If thats the the reason then I don't know.

shugga101 said:
Well I think I found out why I'm getting these speeds. My radio has a "P" and not a "U" like in meiguoguizi's sig. I have the same radio as that (number wise) but he has a "U" and not a "P".
The radios that I can flash have an "x" in that place so won't that just mean it will switch to whatever letter my data is runningo on?
Click to expand...
Click to collapse
I think that U/P thing is determined by one of the settings in the build.prop file. I know it's been discussed before, I just don't recall the details. If you visit the "editing the build.prop file" thread in the dev section, or possibly amongst the comments in the inspire radio thread, I think you might find the specifics in one of those places.
Or browse through henrybravo's posts, I think I remember him explaining it to someone.
Bottom line is that you have the same radio, it's just a setting that's determining the connection type and as a result, that letter changes, depending on that setting.

LeeDroid
Today I flashed the 09.04.11_M2 that is suggested on for LeeDroid 3.2.1 and now I have lost all notification sounds, lockscreen sounds, and keyboard sound feedbacks. Can anyone help?

blippy said:
Today I flashed the 09.04.11_M2 that is suggested on for LeeDroid 3.2.1 and now I have lost all notification sounds, lockscreen sounds, and keyboard sound feedbacks. Can anyone help?
Click to expand...
Click to collapse
First, try another re-flash of the radio.

I did a full wipe and restore and got all the sounds back. Reloaded the RIL and everything works fine.
Sent from my Desire HD using XDA App

Yes the x is a placeholder (remember your algebra).
Open he's right. You have to flash the Riley that goes with the radio and then reboot twice. Make sure you are using the best radio for your Rome.
Sent from my Desire HD using XDA App

Pick_A_Name said:
Yes the x is a placeholder (remember your algebra).
Open he's right. You have to flash the Riley that goes with the radio and then reboot twice. Make sure you are using the best radio for your Rome.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Lol. Autocorrect really has the hots for you.

Lol sorry I was on my mobile and left too much to swift key X. I'll proof read next time!

Pick_A_Name said:
Yes the x is a placeholder (remember your algebra).
Open he's right. You have to flash the Riley that goes with the radio and then reboot twice. Make sure you are using the best radio for your Rome.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Rileys and Romes....I can dig it