Related
I have clockworkmod and I updated the recovery to 3.0.0.8. When I boot into recovery and try to install EC10 comavolt and it won't let me. I also tried to install other recovery's via Rom Manager but it says download failed.
ddb1984 said:
I have clockworkmod and I updated the recovery to 3.0.0.8. When I boot into recovery and try to install EC10 comavolt and it won't let me. I also tried to install other recovery's via Rom Manager but it says download failed.
Click to expand...
Click to collapse
Rom manager is not compatible with our phones. You will likely need to revert back to an older version of cwm.
Sent from my SCH-I500 using XDA App
akellar said:
Rom manager is not compatible with our phones. You will likely need to revert back to an older version of cwm.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Ohhhhhhh OK well how would I go about reverting back and I am looking for the info while Im sending this
ddb1984 said:
Ohhhhhhh OK well how would I go about reverting back and I am looking for the info while Im sending this
Click to expand...
Click to collapse
I too would also like to know where I can get this older version of cwm.
http://forum.androidcentral.com/ver...roms-w-root-clockwork-updated-3-25-a-389.html
There should be a link to a cwm.tar file (not the exact name) on this page. Flash it via odin and there you go.
Sent from my SCH-I500 using XDA App
emarohl said:
http://forum.androidcentral.com/ver...roms-w-root-clockwork-updated-3-25-a-389.html
There should be a link to a cwm.tar file (not the exact name) on this page. Flash it via odin and there you go.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Thats my problem I cant use my USB right now and I can only zip at the moment but barely can do that do to the Recovery messing up
Can't use USB right now...? I think you might be confusing transferring files to the USB card while the phone is booted, with flashing a TAR file via Odin.
Remember--when you're flashing via Odin, your battery is pulled, the phone is off, and then--while you do plug in your USB cable--it's only receiving power through that USB connection.
Use BDE's "How to customize.." guide here, and go directly to step 2. If you don't already have it, grab the "Red" Recovery from this thread (also linked to in BDE's guide); grab the TAR file listed there. Then go back to the guide and follow the instructions for Step 2.
That should get your recovery back to Red recovery, and I think from there I'd make sure everything else is working and the phone boots before doing anything else. Once it's up and running, then maybe give the kernel another shot.
EDIT: Thought of what else you might mean; if you're unable to get Odin to recognize when your phone is plugged in, hit up the Samsung website to get the Samsung USB drivers. Then, when you hold the volume down key as described in the guide, you should see one cell of Odin turn yellow, which tells you your phone has been recognized. Assuming you have a Windows PC, at least.
ChromWolf said:
Can't use USB right now...? I think you might be confusing transferring files to the USB card while the phone is booted, with flashing a TAR file via Odin.
Remember--when you're flashing via Odin, your battery is pulled, the phone is off, and then--while you do plug in your USB cable--it's only receiving power through that USB connection.
Use BDE's "How to customize.." guide here, and go directly to step 2. If you don't already have it, grab the "Red" Recovery from this thread (also linked to in BDE's guide); grab the TAR file listed there. Then go back to the guide and follow the instructions for Step 2.
That should get your recovery back to Red recovery, and I think from there I'd make sure everything else is working and the phone boots before doing anything else. Once it's up and running, then maybe give the kernel another shot.
EDIT: Thought of what else you might mean; if you're unable to get Odin to recognize when your phone is plugged in, hit up the Samsung website to get the Samsung USB drivers. Then, when you hold the volume down key as described in the guide, you should see one cell of Odin turn yellow, which tells you your phone has been recognized. Assuming you have a Windows PC, at least.
Click to expand...
Click to collapse
Yea I even put in another post about my USB issues and can't seem to find a solution. I may just purchase another phone. My girls works perfect and no connection problems but I may of damaged it or something but it only charges doesn't work other wise. ADB, USB file transfer, nothing.
ChromDog's post was a mess. I'm ignoring it.
So you're saying you can't even get the phone to work in Download mode? Will the phone actually boot up into Download mode?
add144 said:
ChromDog's post was a mess. I'm ignoring it.
So you're saying you can't even get the phone to work in Download mode? Will the phone actually boot up into Download mode?
Click to expand...
Click to collapse
Yea I get the yellow screen with the android saying downloading. I have tried 3 cables and 5 diff computers. I even went to cellular south and got a new cable. When I figured it was my phone was when my girls phone worked with the same equipment. Also sometimes when I plug it up to the PC doing download mode it will say USB Not Recognized and I have the drivers installed I even tried to select the specific driver but didnt know which one to do out the that folder of many LOL
Have you tried opening ODIN in Download Mode anyway just to see if it'll recognize the phone?
add144 said:
ChromDog's post was a mess. I'm ignoring it.
Click to expand...
Click to collapse
Rare is the occasion that wiser words than these have been uttered. XD
While I was getting pretty wordy with my answer, Add's more or less on the same track as me: Even with the USB not working when the phone's booted normally, does Odin recognize it even so, or is Odin what you've been trying and not getting to work?
ddb1984 said:
Yea I get the yellow screen with the android saying downloading. I have tried 3 cables and 5 diff computers. I even went to cellular south and got a new cable. When I figured it was my phone was when my girls phone worked with the same equipment. Also sometimes when I plug it up to the PC doing download mode it will say USB Not Recognized and I have the drivers installed I even tried to select the specific driver but didnt know which one to do out the that folder of many LOL
Click to expand...
Click to collapse
The different computers you tried wouldn't really matter unless each one had the Samsung USB driver installed. Also, does your girlfriend have the same model phone as you? If not, it's not necessarily a fair test.
It does sound like you've tried using Odin, and it just hasn't worked (based on the bolded part). So, try this:
http://www.samsung.com/us/support/downloads/SCH-I500RKAXAR
Go to the above link. Underneath where it says "Download Center for SCH-I500RKAXAR", look for "Manuals | Software". Software should be a blue link; click on that.
You should see a list of four items you can download. Look all the way to the right, under the "File" column; there should be four little icons. Click on the first of the four, and Agree to their user agreement. Save the file somewhere easy to remember, and run that file. I'd suggest doing this on any home computer you might connect your Showcase to.
Then, try putting the phone in Download mode and connecting to Odin once again.
Does it work after that?
I dont know how or why but I was able to get odin to work on a XP machine and I flashed the odin files for pick and pack and the odin files for cwm recovery all and was able to get both the recovery and 2.2 but I have more problems LOL. My internal memory is 0. I factory wiped and wiped cache via red recovery but to no avail. Still getting 0
If you can get into your phone and do stuff in Android, I'd run a Titanium Backup of your apps and stuff. If not, you may be SOL.
I'd start by just finding a stock ROM for 2.1 or 2.2.1 and Odin'ing that over to the phone. Start completely clean, no custom ROMs. Then load up CWM Red again.
ChromWolf said:
If you can get into your phone and do stuff in Android, I'd run a Titanium Backup of your apps and stuff. If not, you may be SOL.
I'd start by just finding a stock ROM for 2.1 or 2.2.1 and Odin'ing that over to the phone. Start completely clean, no custom ROMs. Then load up CWM Red again.
Click to expand...
Click to collapse
I have been looking for 2.1 Stock Rom for CS but I have not been able to. I have my apps backed up but unfortunately I can't install them in this Rom yet but I will keep trying to get it.
Ouchie! I just had a look throughout the Mes Dev thread, and the one post I saw for EB11 for Showcase had the link removed. Couldn't find any other reference for an actual stock 2.1 or 2.2.1 specifically for the showcase; the guys *may* tell you the Mesmerize ones work for Showcase, but DO NOT use them until one of them says so. I would guess not, but don't know for sure.
I'd see about hitting the IRC channel and asking for a clean stock ROM from there, and/or maybe getting some "in-person" advice that way. ...or hope Phidelt82 or Elijahblake come across this thread to get it to you/help you out otherwise. XD
LOL IKR but I have already asked them for a Stock 2.1 Rom for CS and I was pointed to someone but they haven't responded to me so idk. And thanks for some of the info and I am happy I was able to get the files b4 he removed his comments. I had them already saved on the computer.
ddb1984 said:
LOL IKR but I have already asked them for a Stock 2.1 Rom for CS and I was pointed to someone but they haven't responded to me so idk. And thanks for some of the info and I am happy I was able to get the files b4 he removed his comments. I had them already saved on the computer.
Click to expand...
Click to collapse
Some individuals were trying to put together a 2.1 stock image but weren't able to get one working, the one they have is stock 2.2 and that is the only pure stock ROM they have, but there is no reason to go back to 2.1 unless you planned on using it and staying with it, so a clean flash to 2.2 should fix any issues you may be experiencing.
bdemartino said:
Some individuals were trying to put together a 2.1 stock image but weren't able to get one working, the one they have is stock 2.2 and that is the only pure stock ROM they have, but there is no reason to go back to 2.1 unless you planned on using it and staying with it, so a clean flash to 2.2 should fix any issues you may be experiencing.
Click to expand...
Click to collapse
I am with Cellular South and I don't believe there is a stock for us just yet. I was also able to put the SDcard in a card reader and put Superclean 2.9.2 on it for Showcase. Pray I get internal storage and my phone works.
YES!!!!!!!! Internal Storage w/ Superclean and a working recovery. Well I have more issues to attend to but that's wonderful to me.
Well everyone here is the moment we have all been waiting for a little GB love for our SGS4G http://hotfile.com/dl/121009639/fc3e54d/T595VUVKF1.rar.html down load file run through odin Gingerbread Goodness credit to birgertime for the find.
Password For the file is samfirmware.com
This Rom is not Rooted
Currently no way to get back to our own roms right now with that GB rom! I cannot for the life of me restore my backups.
Eric-1987 said:
Currently no way to get back to our own roms right now with that GB rom! I cannot for the life of me restore my backups.
Click to expand...
Click to collapse
Sorry for your woes. Hope u get things worked out. If you do get things worked out wait until one of the devs fixes this issue. I'm sure well see a deodexed version soon, I hope.
Sent from my SGH-T959V using XDA Premium App
I love it, downloading right now. Lets see how our phone files
This is huge. Has anyone rooted this yet? That's the question. Superoneclick doesn't seem to do the trick.
Sent from my SGH-T959V using XDA Premium App
Eric-1987 said:
Currently no way to get back to our own roms right now with that GB rom! I cannot for the life of me restore my backups.
Click to expand...
Click to collapse
pretty sure you need a root before you can do that buddy
Eric-1987 said:
Currently no way to get back to our own roms right now with that GB rom! I cannot for the life of me restore my backups.
Click to expand...
Click to collapse
You can odin a ROM that's gotten rooted so you can use quickreboot or adb to get into recovery mode, then you can use CWM from there if you had it installed already. I just had to flash an old rooted ROM to be able to get to recover my CWM backup.
EDIT:
OP, by the way the password for the file at that link is
samfirmware.com
FBis251 said:
You can odin a ROM that's gotten rooted so you can use quickreboot or adb to get into recovery mode, then you can use CWM from there if you had it installed already. I just had to flash an old rooted ROM to be able to get to recover my CWM backup.
EDIT:
OP, by the way the password for the file at that link is
samfirmware.com
Click to expand...
Click to collapse
Thanks will update original post
Ah man I just got my phone to my liking lol.
I think I'll wait a bit though as this is almost like a KC1 for froyo. Leaked build, so there will probably be a final build avail via OTA and Kies.
nothing better to do might as well flash and play lol worse comes to worse can always odin back and recover with clockwork
super!
flashing rite now. let you guys know how it goes later.
Just curious ....Anyone else not able to get into download mode or stock recovery via ANY METHOD ?
Bl4ckpheniX said:
Just curious ....Anyone else not able to get into download mode or stock recovery via ANY METHOD ?
Click to expand...
Click to collapse
That would be no bueno. Definitely interested to hear if you can get into Download mode, recovery not as much. DL at least you have ODIN.
^^uh oh
10chara
I tried to flash without the bootloader using Heimdall so I can flash back. it finished flashing but wont boot to the OS. so I Odined back to KD1.
try the home button should allow u to flash back via odin
fknfocused said:
^^uh oh
10chara
Click to expand...
Click to collapse
I think on the galaxy s phones they couldn't get into recovery or dl mode unless they flashed the gingerbread boot loader
Sent from my HTC Glacier using XDA Premium App
Just flashed with no problem. Everything seems to work fine. I dont see much changes just some of the menu settings. Phone seems to run smooth. Gonna use it for a bit and let you guys know.
Thanksssssssssssssssss!!!
To going to download mode first you must open ODIN. Assume your phone is off. Then press and hold the volume + and - then plug the USB to your PC. You should see a BIG yellow triangle on the phone said Download mode. Hope this helps.
Keymapping is changed in GB. Not familiar with your phone nut on the original Vibrant GB bootloaders now require one volume key instead of two.
Recently rooted my droid charge using voodoo lagfix kernel with odin 1.85. Everything went fine until I tried to put files on my SD card. So I found the forum that had the fix. Wasn't able to put fix file on the SD no matter what I did. So I just said forget it and I went ahead and flash my phone back to the stock ROM using Odin 1.85. Now every time I go to flash it odin says it fails. Now I've flash my phone to factory before and it worked perfect. Also I put gingerbread on it and that worked. Now I can't do it anymore. It just keeps failing.
Any suggestion?
Thanks,
Brian
EDIT: Not just odin 1.85 Any version I use doesn't work.
bvsbutthd101 said:
Recently rooted my droid charge using voodoo lagfix kernel with odin 1.85. Everything went fine until I tried to put files on my SD card. So I found the forum that had the fix. Wasn't able to put fix file on the SD no matter what I did. So I just said forget it and I went ahead and flash my phone back to the stock ROM using Odin 1.85. Now every time I go to flash it odin says it fails. Now I've flash my phone to factory before and it worked perfect. Also I put gingerbread on it and that worked. Now I can't do it anymore. It just keeps failing.
Any suggestion?
Thanks,
Brian
EDIT: Not just odin 1.85 Any version I use doesn't work.
Click to expand...
Click to collapse
what are the steps you're using in odin? put the battery back in to flash stuff (if you don't already have it in) if it keeps failing... also what are you trying to flash and where are you trying to end up rom/kernel wise?
I just want to put the stock ROM back on. Right now I have my phone booted up but I dont have service. I have 4G but no calling services. But the weird thing is that when I just ran odin it said it failed but I just shut my phone off and it booted up.
bvsbutthd101 said:
I just want to put the stock ROM back on. Right now I have my phone booted up but I dont have service. I have 4G but no calling services. But the weird thing is that when I just ran odin it said it failed but I just shut my phone off and it booted up.
Click to expand...
Click to collapse
Yeah if an odin flash fails and you unplug it and boot it up it will start the last rom you were running. You can still get it into download mode for odin right? Strange that its not flashing right... Try using a different USB port on your pc (as well as plug in your pc for good measure), disable any antivirus software you may have or run Odin as administrator, then put the battery back in for odin as always only use PDA and/or PIT sections
tried all my usb ports, but yeah getting into download mode works fine. But I just got back from verizon. There sending me a new phone.
bvsbutthd101 said:
tried all my usb ports, but yeah getting into download mode works fine. But I just got back from verizon. There sending me a new phone.
Click to expand...
Click to collapse
I probably would've tried a little more to fix it, its extremely hard to brick this phone or make it so you can't recover or get back to stock... anyways thats good, hope its easier to odin with the new one
yeah, i think ill wait for them to come out with a kernel that doesn't make it so your SD card stops working when you root the phone. Right now my phone is working fine except the fact that I can't make phones calls.
bvsbutthd101 said:
yeah, i think ill wait for them to come out with a kernel that doesn't make it so your SD card stops working when you root the phone. Right now my phone is working fine except the fact that I can't make phones calls.
Click to expand...
Click to collapse
hmm that's weird, something may have gone wrong internally that has to do with the radio or making calls... though if it's not gonna do what a phone does and make calls then yeah I'd get a new one too
anoninja118 said:
hmm that's weird, something may have gone wrong internally that has to do with the radio or making calls... though if it's not gonna do what a phone does and make calls then yeah I'd get a new one too
Click to expand...
Click to collapse
Exactly, pretty important part if I do say so myself. I'm happy though. They didn't give any problem. I didn't even ask to get a new phone. They just told me that we'll just send one out to you.
I went from SAUROM, flashed ICS Build 17 twice, and after "SUCCESSFULL" message, it boots up but without any cell coverage network and it doesnt even recogonise Internal storage. It shows only 1.8Gb memory and not the internal files.
I CAN boot into recovery, and in that when i choose FLASH ZIP FROM SD CARD, i can see EVERYTHING!!! all my files,folders etc are there.... ive flashed the same ROM like 10 times now, same problem.
Also, i tried ODIN 1 click , but my phone doesnt get recogonised in Download Mode.
so im stuck with the this ROM without any cell coverage, without any memory, nothing.
WHAT TO DO..please help me out!!!
PS: i have tried ODIN 1 (phone doesnt get recogonised)
i have also wiped data,cache,dalvik etc etc. done everything!!!
neo_31591 said:
I went from SAUROM, flashed ICS Build 17 twice, and after "SUCCESSFULL" message, it boots up but without any cell coverage network and it doesnt even recogonise Internal storage. It shows only 1.8Gb memory and not the internal files.
I CAN boot into recovery, and in that when i choose FLASH ZIP FROM SD CARD, i can see EVERYTHING!!! all my files,folders etc are there.... ive flashed the same ROM like 10 times now, same problem.
Also, i tried ODIN 1 click , but my phone doesnt get recogonised in Download Mode.
so im stuck with the this ROM without any cell coverage, without any memory, nothing.
WHAT TO DO..please help me out!!!
PS: i have tried ODIN 1 (phone doesnt get recogonised)
i have also wiped data,cache,dalvik etc etc. done everything!!!
Click to expand...
Click to collapse
Did you install the Nexus S drivers from the CM9 OP? that should get your phone recognized in odin.
Did you try going into CWM, factory reset, format system, wipe cache and dalvik cache and then flashing a new ROM?
Sent from my SGH-I897 using XDA App
Sounds like you need to use Heimdall one click back to stock gingerbread. I usually use that when I mess up flashing ics ROMs and odin doesn't want to recognize my phone. Read more about Heimdall
Sent from my SGH-I897 using XDA
+1 Heimdall
Edit: forget what I said on this post. Just read about Heimdall
Sent from my SGH-I897 using XDA
That information is completly incorrect....
Oh. Apologies then.
Sent from my SGH-I897 using XDA
Hey thanks. .Il gve Heimdall a shot nd report back. .Thanks
panda_mode said:
Sounds like you need to use Heimdall one click back to stock gingerbread. I usually use that when I mess up flashing ics ROMs and odin doesn't want to recognize my phone. Read more about Heimdall
Sent from my SGH-I897 using XDA
Click to expand...
Click to collapse
Could you please point me in the right direction...which Heimdall r u talkin about exactly...am really sorry but i dont have access to a computer for much time and searching through my old nokia is a pain in the ....
Use Apex ROM Heimdall package. It has links to heimdall website. It's pretty good ROM too.
Or use SFX-style one-click Heimdall package for SauromKK4.
bravomail said:
Use Apex ROM Heimdall package. It has links to heimdall website. It's pretty good ROM too.
Or use SFX-style one-click Heimdall package for SauromKK4.
Click to expand...
Click to collapse
hey im using Heimdall but still it shows up as unknown device in zadig...
what to do!!!
ive installed drivers from Odin 1 click, still its coming up as unknown device
Install zadig driver and reboot your computer. Make sure your USB cable and computer both funcitonal. I have second computer to test things out.
@Original Poster: I've sent you a Private Message in case you did something weird in installing the zadig driver.
Hope things will go well for you.
ok...so using an external micro sd i flashed icy glitch, and i also flashed the Dark Knight ROM..
same problem...Doesnt recogonise Storage and also no network...im Beginning to think this is a major F*** up....
Hey...could my problem also be the same as "Encryption Unsuccesfull" given here http://forum.xda-developers.com/showthread.php?t=1447303&page=11
even though i never got the same message, but even I cant see the rest of the memory..only 1.8 is present....
Hmmm... Could be a hardware issue then. As for your network, you have to set your phone on the correct APN. It takes forever for my pc to recognize my internal storage or that its connected, but I think that's an issue with some people on ics. Try reinstalling the samsung drivers.
Sent from my SGH-I897 using XDA
Hey...I finally managed to get it recognised ...went back to stock 2.2 through Odin 1 click...then to 2.3.5 and then flashed docs ics.. ...everything's back to normal now...
Thanks a lot for your help guys...really...thanks
For those who have been following this thread, the moral is this:
You're only bricked if you literally have a dead phone that doesn't respond at all. Can't turn on, doesn't vibrate, doesn't show signs of charging, doesn't go to DL mode, etc. Even then, if you have the unbrickable mod then you are literally never going to be able to brick your phone, even under circumstances that would normally cause a brick.
Well it bricks, but you run a program that takes advantage of the hardware being wired to be able to load things into the RAM while the phone is off and execute an upgrade from there!
Ok so I've been rooted and unlocked for a while now, but stayed with the stock rom as when I tried out Synergy Nightlies it gave me some errors. So I went to try out CleanRom 2.1, people liked it and I didn't notice any flashing errors. So I flashed it through CWM 6.0.1 and it gave me the yellow exclamation mark saying I had unauthorized data on my phone. So I followed the sticky on how to unbrick my phone using the 2 boot loaders and the root66 stock image. My issue is that when running the root66 stock image through Odin it fails at _XmitData_Read, which seems to be somewhere in system.img.ext4. I've tried rebooting the computer, the phone, Odin, it just doesn't work. So when I reboot my phone after the failure I get Odin auto loading saying:
Odin Mode
Product Name: SCH-I535
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
Qualcomm Secureboot: Enable
Then an image of a phone, 2 dots, a yellow exclamation, 2 dots and a computer are shown with the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
Anyone able to help me?
can you still get to odin mode? also if you have kies installed on the computer erase it.
kidhudi said:
can you still get to odin mode? also if you have kies installed on the computer erase it.
Click to expand...
Click to collapse
Kies isn't installed on the computer and yes I am still able to get into Odin Mode.
I'm under the impression that "unauthorized software" message comes from the locked bootloader (if I'm wrong about that someone plese correct me.)
Sounds like you're functional enough to be able to Odin back to stock and go from there - that's what I'd try. See the stickied thread in the Q&A forum.
I would run the FULL VRALF stock image through ODIN to return to stock. That is always the safest way out of a sticky situation.
Thanks guys, according to another post the version of EZ-Unlock I used most likely gave a false report and never actually unlocked my phone. The problem with going back to stock, which if what I'm trying to do, is that it fails.
Could be an USB issue - an intermittent connection would be most likely to cause problems while sending the system partition since that's the biggest. I've had problems using adb from time to time if I plug into one of the front-panel ports on my PC but no trouble with one on the back.
Maybe try switching ports or try a different cable ...
Actually what usb plug are you using on your computer? You should be using one in the back of your computer by the power supply. Seen the front jacks not work correctly for large transfers. Finally, try another usb cable.
Sent from my SCH-I535 using xda app-developers app
Strange.... i was able to flash syergy on thefirst try. Never used odin during the whole process....
If youre rooted you need to make sure you have a custom recovery in place like cwm or twrp. Make sure you make a nand-backup.
I used casual to flash unsecure bootloader, with that and recovery in place you should be able to flash roms without any hitches....
I could never find a comprehensive guide on using odin so i never got around to testing it
kintwofan said:
Actually what usb plug are you using on your computer? You should be using one in the back of your computer by the power supply. Seen the front jacks not work correctly for large transfers. Finally, try another usb cable.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
So far I've tried 3 different USB cables and both a desktop, both front and back ports and a laptop, each one fails on the write of XmitData under system.img.ext4
I had a custom recovery installed and Odin is only being used to get me back to a stock rom, otherwise I did all my flashing under CWM 6.0.1 or twrp. I think the whole fake unlocked bootloader just hard bricked the software.
EDIT: Come to think of it I remember waking up to my phone in download mode. I think Verizon tried to install the update to my phone while I was sleeping. Granted it failed at the end, but I'm wondering if that did something to brick me now.
If you can get in download mode it can be saved. I woud re download the stock firmware or the 66, but personally i would go bone stock. You may just have a bad download.
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
If you can get in download mode it can be saved. I woud re download the stock firmware or the 66, but personally i would go bone stock. You may just have a bad download.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yea, I'm currently downloading at the speed of slug the newest update from the forums, will probably just redownload at home, since it's going to take over an hour >.<
EDIT:
Does anyone have a link for an older EZ-Unlocker, that is known to work, so that I don't get this problem yet again.
FIXED!
Ok, so using the newest stock rom from the dev forum worked. Can someone please give me a link to an old EZ-Unlocker so I can flash without worrying about another massive brick in my palm. I'm guessing that running the original root66 stock rom through dropbox somehow corrupted it.
LlirasChosen said:
Ok, so using the newest stock rom from the dev forum worked. Can someone please give me a link to an old EZ-Unlocker so I can flash without worrying about another massive brick in my palm. I'm guessing that running the original root66 stock rom through dropbox somehow corrupted it.
Click to expand...
Click to collapse
I personally suggest not using the app if you already had trouble. Just root your phone using the Debug Root method in Development, download the aboot.img from Adam Outlers thread HERE to your phone, and run the commands at the very bottom in Terminal Emulater app (from the market).
That way you know for sure your bootloader is unlocked. This is what I have done and never had an issue.
Edit: Glad you got your issue resolved!