Database Info

How to unbrick the soft bricked Captivate

NOTE:
So far this has been the only sure fire method I've found to 100% get around any brick situation regardless of firmware, etc. This only works for the captivate, not any other galaxy s variant.
Situations: phone-!-Computer / no download mode
Black Screen / RST_STATUS 0x0
Procedure:
1. Remove the battery, external SD card and SIM card.
2. Wait 10 seconds.
3. Open odin3
4. Connect usb cable.
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Please forgive me if this is duplicate some where, but I tried every procedure I could find on google to no avail, then accidentally found this method just before I was going to box it back up and see if my buddy at AT&T would make me eat it or not.
My situation was: Launched Odin3 to flash H3 firmware, died twice in the middle, and on the third time locked up half ways just at the beginning of factoryfs.rfs -- Then the phone did nothing. Blackscreen is all. Interestingly enough, while in the state if you hold volume up + power, it will give a hw diagnostic screen. Beyond that I could get no where. Just a black screen, no acknowledgement when connected to PC, no charging indicator, nothing.
If this is a dupe Im sorry but this method I could not find and hope to make it readily available to people who may think their phones bricked.
Update 12/22/2010:
How to BRICK the phone / WARNING!!!
If for whatever reason you decide to use Odin to flash a stock GTI9000 ROM and manually add the kernels and modems using a "pure" 2.2.1 sammy rom. BEWARE.
Researching a lot, it seems the consensus is that the sbl in the 2.2.1 versions of the GTI9000 has *hard* download mode crippled.. Meaning if there is a software screw up YOU CANNOT USE A USB JIG OR ANY OTHER METHOD OF GETTING THE PHONE IN DOWNLOAD MODE!!! To fix it you'll need a new one or JTAG to replace the bootloader.
As far as I can tell, beyond getting completely rid of the AT&T logo, there is no need to flash boot/sbl to get the "purity" of the 2.2.1 sammy roms.
Extract all files from the tar EXCEPT boot/sbl and re-tar and flash just those to avoid overwriting the stock captivate boot loader.
Also, it does not appear the boot/sbl from the captivate 2.2 leak suffers this same problem.
For any one iffy on bricking their phones, stay away from roms that remove COMPLETELY the AT&T logo on boot. This generally means the boot loader has been messed with any you may be screwed if you soft brick the phone. Most CWM roms dont overwrite the boot/sbl, but some can and do. Watch yourself.. if it the AT&T logo goes away COMPLETELY, I recommend flashing JF6 with One click while the roms alive using adb reboot download and try another rom.

thanks!
worked...took a few tries but some trick with this captivate to get it into download mode.. i was totally bricked too, diag screen with PC/Phone icons and exclamation mark. for me 1.) plug usb, 2.) hold power and vol up/down and connect battery (it fell out) and i was in download mode

I guess a similar procedure was on the odin3 one click thread, but there is something different in your procedure, it's not my case but it would be nice if some people confirms this as this may be useful and if it really works it should be included in odin thread

What worked for me was: Pull the battery, sim and micro sd card. Open odin on the PC. Insert the battery. Hold vol up and down then with the buttons held connect the usb cable. Just remember to plug in the usb cable with the vol up and down held in and odin must be open on the computer.
I also ran into the vol up plus power red text screen. Interesting to note that one of the fields will change depending if the usb cable is connected or not.

mine is dead
mi samsung captivate was working great but, suddenly it go black and only the touch bottom have light, when i plug it in the a/c it show is charging. i'm mac user and a read that i ned to use odin3 but it not work on mac. how i can unbrick the phone???
is rooted with one click lag
the dbdata was modif to
thats all
HEEEEELLLLLPPPPPP

Odin will not open on the mac?
Cant you use a virtual machine and use Odin on a Mac that way?
Or else take the odin 3 single click for JF6 and use on a friends Windows Computer.

Please help - unable to flash back with Odin3
I have pretty much tried it all at this point and am trying to figure out what I'm doing wrong.
I followed the directions just in case get to the big yellow triangle with the droid shoveling and the screen stays at "downloading, do not turn off target..."
Of course I had Odin3 open already but its not seeing my phone, USB drives are installed am using Odin3 ver. 1.30.
Any help would be appreciated, TIA!

TechNut* said:
I have pretty much tried it all at this point and am trying to figure out what I'm doing wrong.
I followed the directions just in case get to the big yellow triangle with the droid shoveling and the screen stays at "downloading, do not turn off target..."
Of course I had Odin3 open already but its not seeing my phone, USB drives are installed am using Odin3 ver. 1.30.
Any help would be appreciated, TIA!
Click to expand...
Click to collapse
Best way to get download mode is use adb and type adb reboot download.
Or follow the volume up/down held with odin open on the computer, then you plug in the usb cable to the computer.

askpcguy said:
What worked for me was: Pull the battery, sim and micro sd card. Open odin on the PC. Insert the battery. Hold vol up and down then with the buttons held connect the usb cable. Just remember to plug in the usb cable with the vol up and down held in and odin must be open on the computer.
I also ran into the vol up plus power red text screen. Interesting to note that one of the fields will change depending if the usb cable is connected or not.
Click to expand...
Click to collapse
Thank you thank you thank you. i had a totally dead no boot or anything and this worked, i was going through the whole returning the phone senerio in my head

mattbeau said:
Thank you thank you thank you. i had a totally dead no boot or anything and this worked, i was going through the whole returning the phone senerio in my head
Click to expand...
Click to collapse
Just sharing the info! Makes you think twice about trying something else don't it?

does not seem to work because as soon as my battery touches the contacts it goes to the diag screen. do I have to release the power button in super human speed times there?
looked at all threads here, looked elsewhere -- there are some that are not fixable. Wanted to add that in case others come here and think that they might be the only ones that can't get it to work.
Ended up sending mine off to Samsung to reset today. :/

I love you! I called AT&T to send me documentation to sign and it was going to cost me 125 dollars to get it replaced even with warranty. And you fixed it !

i have tried just about every single method detailed in these forums, and nothing works.
Trying what OP suggested just sends me to the battery charging animation screen.
Anybody have any ideas ?

file analysis
I keep can get to the download screen and I hit start and it does the same thing everytime it just does File analysis i cant figure what i am doing wrong here somebody please help me

I think the issue was it had something to do with 64 bit windows 7 i just re did the stock rom one click solution and it worked fine

thekurrgan said:
NOTE:
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Click to expand...
Click to collapse
Thank you for sharing your experience.
I don't have a Captivate yet but am doing research on it and hopeful of getting one. I am confused about one thing.
Every where that I have read about how to enter Recovery mode or Download mode on the Captivate using the 3 button method, it says holding down both Volume UP + Volume Down (plus Power button) will enter Recovery mode. But you say it enters Download mode which is confusing to me. As I recall, to enter Download mode you must press the Vol Down only (plus Power button). Could it be because the phone won't go into Recovery mode, it goes into Download mode instead? Am I missing something?
Thank you!

Download mode is for updating the phone's firmware.
Remove battery, plug in the usb cable to the phone, open ODIN on the computer (need usb drivers installed before hand) on the phone hold volume up and down then plug the phone into the computer. Your phone will say DOWNLOADING. This method works even if you run into problems and the phone refuses to boot properly.
Recovery mode is for installing Update.zip. The method is tricky but involves holding volume up/down and power, the phone will show ATT then go black. It will repeat that but after the second time it goes black let go of power.
If that doesnt work, android debug tools ADB reboot recovery will work even better.
Or root the phone and use Clockwork Rom manager to boot into recovery, just press the menu item.

askpcguy said:
Download mode is for updating the phone's firmware.
Remove battery, plug in the usb cable to the phone, open ODIN on the computer (need usb drivers installed before hand) on the phone hold volume up and down then plug the phone into the computer. Your phone will say DOWNLOADING. This method works even if you run into problems and the phone refuses to boot properly.
Recovery mode is for installing Update.zip. The method is tricky but involves holding volume up/down and power, the phone will show ATT then go black. It will repeat that but after the second time it goes black let go of power.
If that doesn't work, android debug tools ADB reboot recovery will work even better.
Or root the phone and use Clockwork Rom manager to boot into recovery, just press the menu item.
Click to expand...
Click to collapse
Thank you askpcguy! I understand the difference between Download and Recovery modes.
So the procedural difference here is having the battery in + Power button, versus battery not in (use USB cable instead) and no Power button. Can the phone get power from the PC via the USB cable? This seems to differ from what the original poster said about download mode. Perhaps OP could edit his original post for clarification? Or am I still missing something? Thanks to all

The phone does get power from the USB cable.
The difference is one procedure uses the USB cable (download mode) and the other does not (Recovery mode).
The volume up+down method does not use the power button, the phone is powered on into download mode once you plug in the USB cable.
We say pull the battery to get the phone powered off. If a firmware flash stalled or doesn't complete, pull the battery and try again!

I now understand the precedural difference.
Thank you askpcguy!

Serious i think

I was doing odin to get to download mode and trying odin gb bootloaders for 2.3.3. Now my phone doesnt boot i have a black screen picture of a phone triangle and computer. What did i do and how can i get out of this? Please need help. Im not even rooted yet i was on eclair and 2.1update1 and did have recovery but update.zip sd file bad so i could never reinstall packages.

Which gb bootloaders were you trying to install the i9000 or the i897
Sent from my SAMSUNG-SGH-I897 using XDA App

i897 gb bootloader. is there hope? ive got black screen and pic of a white phone then an orange triangle! and white computer

cell2011 said:
i897 gb bootloader. is there hope? ive got black screen and pic of a white phone then an orange triangle! and white computer
Click to expand...
Click to collapse
If I'm not mistaken, the phone -!- PC screen is the equivalent of download mode. I'd unplug your phone, restart Odin, plug phone back in and go from there. I'll defer if someone has a more detailed explanation though

edtonn said:
If I'm not mistaken, the phone -!- PC screen is the equivalent of download mode. I'd unplug your phone, restart Odin, plug phone back in and go from there. I'll defer if someone has a more detailed explanation though
Click to expand...
Click to collapse
Your right, got that screen recently myself. Just do as he says and you will be fine.

im trying that just not working i tried took everything out the plug usb and open odin 3 and hold power and volume put in battery and let go of power and nothing?

cell2011 said:
im trying that just not working i tried took everything out the plug usb and open odin 3 and hold power and volume put in battery and let go of power and nothing?
Click to expand...
Click to collapse
leave the power button alone
power down
hold in volume buttons
insert USB

If you managed to get the GB bootloaders in place (assuming I9000), the download mode key combo is to hold Vol- and Power. If you're still on Eclair/Froyo bootloaders, hold Vol-/Vol+ (with power off), then insert the USB cable.

cell2011 said:
im trying that just not working i tried took everything out the plug usb and open odin 3 and hold power and volume put in battery and let go of power and nothing?
Click to expand...
Click to collapse
Unplug your phone, pull your battery for 2+ min. Then open Odin, plug in your USB, press and hold the vol up and vol down, while holding them down, put your battery in. You should see a big triangle with the Android guy . That is Download mode

which odin i have two 3 v1.85 happy flashing and 3v1.85 android+slp

Have odin opened remove battery, insert battery,hold vol+ and vol- , then insert usb . if odin recognizes the phone try flashing the bootloaders again
Sent from my SAMSUNG-SGH-I897 using XDA App

nothing im not sure at this point its like the usb doesnt even make a sound when i plug into computer

odin is not recognizing my phone

is there someone that would be willing to troubleshoot this for me over the phone or chat?

This is for sale if someone can fix this PM me. Does anyone have one for cheap i dont even care if it is cracked as long as its fully functional

Is the usb plugged into back of pc or port number 1 on laptop?
Sent from my SAMSUNG-SGH-I897 using XDA App

Reboot your computer
What OS are you running?

Let's run down a quick checklist of things to make sure that you're putting yourself in the best possible place for success:
1. Unplug any cables you have plugged in right now, Turn off ODIN, remove the battery, and reboot your computer.
2. Boot up your computer, let it fully boot and settle. Once it's fully settled, double-check to make sure you have the Samsung USB drivers installed for the Captivate (and that's its for the correct version of Windows - x86 or x64).
3. Assuming the drivers are present and correct, start up ODIN (You might try the One-Click to Stock, as it will take you back to a stock state). Let it sit for right now.
4. Plug your USB cable into a port that connects directly to the motherboard (but not to your phone just yet). On a desktop, it will be on the back of the machine. On a laptop, you may have to find it by trial and error.
5. Reinsert the battery. Hold Vol+/Vol-, and then insert your USB cable. This should put you in download mode. If not, pull the cable, remove the battery, reinsert the battery, and hold Vol- and power until download mode appears, then insert the USB cable.
6. Assuming you are in download mode, and the cable is inserted, check to see if ODIN recognized the phone. If not, try a different USB port on the computer. You may have to reboot your computer between trials.
7. If ODIN still won't recognize the phone, you may need to look into using Heimdall to flash.
Post back if you have questions.

I have to get a USB jig to get to download mode and special thanks to kangi26 for alll his help. And ty jmtheiss for the last post

cell2011 said:
i897 gb bootloader. is there hope? ive got black screen and pic of a white phone then an orange triangle! and white computer
Click to expand...
Click to collapse
I thought I remember seeing somewhere a ways back that from this alternate d/l screen Odin may not recognize the phone, but that flashing Odin package would work anyway.
Pretty sure I saw that...but at this point, can't hurt to try. Otherwise jig should get you there.
Sent from my SGH-I9000 using XDA App

Strange icon on my Startup Infuse 4G

I think i BRICKD it.....
I was performing a Restore to STOCK using Odin 3 v 1.7 and the GTG's UNBRK files from here.
The process failed while the phone was in Download mode.
Now all I get is
An icon which looks like
A Cell Phone ........Exclamation Mark (in orange).......... Computer
The phone is not responding to any of the buttons:
1. No power down... I have to remove the battery and then no matter what I do, power on or else, it shows the same icon
Any one else been here?
Any way to FIX this or am I SOL?

I believe this is in the wrong forum but I understand your panic. Don't take my word for this but I believe you need a USB jig to get out of this. Or unless try this:
1. Pull battery for 15-20 seconds
2. Re insert battery
3. Hold volume up/volume down while plugging in USB cord from computer
4. If it succeeds you should be in download mode!
P.s. Sorry if you have already done this, i'm just attempting to help you troubleshoot
Sent from my SGH-I997 using xda premium

I believe this is what you're seeing..
http://img196.imageshack.us/img196/3323/20101211170056.jpg
Sent from my SGH-I997 using xda premium

Like rominator was saying pull battery hold volume buttons replace battery insert USB cord will turn on in download
Sent from my SAMSUNG-SGH-I997 using XDA App

theROMinator said:
I believe this is what you're seeing..
http://img196.imageshack.us/img196/3323/20101211170056.jpg
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Thank you for the suggestion. Yes, that is the exact thing I am seeing and No, that Vol Up + USB insert still gives the same icon.
What is a USB jig? and where do I get it?
Many thanx and sorry for posting it in the wrong forum... perhaps, admin can move to the right one.... yes, it was panic.

phoneman108 said:
Thank you for the suggestion. Yes, that is the exact thing I am seeing and No, that Vol Up + USB insert still gives the same icon.
What is a USB jig? and where do I get it?
Many thanx and sorry for posting it in the wrong forum... perhaps, admin can move to the right one.... yes, it was panic.
Click to expand...
Click to collapse
Uhh, I haven't gotten stuck on that on my Infuse I don't think, but with the Captivate the solution was to hold vol + and - and power at that screen until it rebooted, then let go of power and it would fall back to download mode.
And yes, this is not development and should be in the general section.

phoneman108 said:
Thank you for the suggestion. Yes, that is the exact thing I am seeing and No, that Vol Up + USB insert still gives the same icon.
What is a USB jig? and where do I get it?
Many thanx and sorry for posting it in the wrong forum... perhaps, admin can move to the right one.... yes, it was panic.
Click to expand...
Click to collapse
EDIT: Did you hold BOTH volume up and down as you plugged in the usb?
USB Jig
http://www.amazon.com/gp/offer-listing/B0053H73JQ/ref=dp_olp_0?ie=UTF8&redirect=true&condition=all
It's been reported here in the forums that IT DOES work. You might want to search around to confirm that. Or, if you want quick help you can possibly explain more of what you did to get your phone to this point.

Jig Does work!!!
i made at the job not to long ago....took me a while to get the right resistance, but it got it into download mode.

theROMinator said:
EDIT: Did you hold BOTH volume up and down as you plugged in the usb?
USB Jig
http://www.amazon.com/gp/offer-listing/B0053H73JQ/ref=dp_olp_0?ie=UTF8&redirect=true&condition=all
It's been reported here in the forums that IT DOES work. You might want to search around to confirm that. Or, if you want quick help you can possibly explain more of what you did to get your phone to this point.
Click to expand...
Click to collapse
Yes, I meant to write Holding BOTH Vol+ and - and USB insert.
Here are the steps that I got me here... one step is completely stupid....
1. Yesterday, I was trying to get 3e recovery, so got the zip file
2. MISSED this step - of Copying the recovery file to SD Card.
3. Renamed the old recovery in the bin folder to _old
4. Rebooted and then used the ROM Manager to reboot into Recovery.... Bad idea - The phone went blank....
5. Only solution I saw was to ODIN in the GTG's Ultimate unbrick.....
6. Went into Download Mode....
7. ODIN sees the COM Port.
8. Loaded the .pit and other files per instructions....
9. Pressed START
10. ODIN reports failed.
11. Unhooked the USB and HARD rebooted.... Arrived at this icon.
Yes, i am a noob and am paying for my mistake of overlooking a step.

You could possibly try heimdall... do you have kies installed (only needed for drivers)? Hmm, I couldn't help you any further w/o actually being there
Definitely keep me posted!

I have bricked my phone a few times now . Same error screen and everything, just do the vol + and vol - down trick , let it boot to the error screen and startup odin 1.8 or higher. That part is very important. Odin 1.8 will recognize it as a serial device and write the software . Good luck!

I've been in that icon, but I just tried back with Odin gtg's unbrick and it went through perfectly as always. I got there because I forgot to select the pit file and Odin started to download and it failed.
I think that symbol is the same download mode but in this case you must use Odin because the phone can't startup itself. Just don't panic if it worked for me then it would work for you.
Sent from my SGH-I997 using XDA Premium App

Nopcodex90 said:
I have bricked my phone a few times now . Same error screen and everything, just do the vol + and vol - down trick , let it boot to the error screen and startup odin 1.8 or higher. That part is very important. Odin 1.8 will recognize it as a serial device and write the software . Good luck!
Click to expand...
Click to collapse
weird because I have used odin 1.7 with success each time..

Oh yeah, that error screen is a download mode isn't it? I forgot about that. So just use unbrick from there or flash something else you want.

AJerman said:
Oh yeah, that error screen is a download mode isn't it? I forgot about that. So just use unbrick from there or flash something else you want.
Click to expand...
Click to collapse
Yeah, that error screen is download mode, just like the usual "Construction Android" screen, with one difference:
The phone is forcing download mode because it knows it's hosed up. It's saying "flash something with Odin or you're not going anywhere".
So you're already in download mode - no need for button combos, the phone realized you needed it and went straight there for you.
BTW this doesn't belong in Development.

re: its not bricked!!!
phoneman108 said:
I think i BRICKD it.....
I was performing a Restore to STOCK using Odin 3 v 1.7 and the GTG's UNBRK files from here.
The process failed while the phone was in Download mode.
Now all I get is
An icon which looks like
A Cell Phone ........Exclamation Mark (in orange).......... Computer
The phone is not responding to any of the buttons:
1. No power down... I have to remove the battery and then no matter what I do, power on or else, it shows the same icon
Any one else been here?
Any way to FIX this or am I SOL?
Click to expand...
Click to collapse
Its not bricked!!!
Those symbols only mean that it did not finish the last operation/flashing
Its the same as download mode.
So go back into those "Cell Phone ........Exclamation Mark (in orange).......... Computer"
Which is download mode and start a new flash of the Ultimate Unbrick.
Good luck, be sure to to put PIT to PIT PDA to PDA and PHONE to PHONE
in odin!!!

GOOD NEWS.
That was simple... Followed the suggestions from Nopcodex90 , Mrjunky and all....
Just started ODIN, loaded the PIT, PDA and PHONE files and off it went and am back alive........
You all are so helpful... Thank you all..... I learnt valuable lessons today.....
Now, if I may request the Admin to please move this post to the correct forum ......

phoneman108 said:
I think i BRICKD it.....
I was performing a Restore to STOCK using Odin 3 v 1.7 and the GTG's UNBRK files from here.
The process failed while the phone was in Download mode.
Now all I get is
An icon which looks like
A Cell Phone ........Exclamation Mark (in orange).......... Computer
The phone is not responding to any of the buttons:
1. No power down... I have to remove the battery and then no matter what I do, power on or else, it shows the same icon
Any one else been here?
Any way to FIX this or am I SOL?
Click to expand...
Click to collapse
That icon is a form of download. You can still connect to odin amd use ultimate unbrick
looks like i some beat me to it. Glad to see your back
Sent from my SAMSUNG-SGH-I997 using xda premium

That happened to me other day I just plugged it in Odin like that and it recognized it and did gtg unbrick back to stock, try to restart Odin and try plugging it in like that and see if Odin recognizes it, it recognized mine
Sent from my SAMSUNG-SGH-I997 using XDA Premium App

Take out the battery, put battery back in, hold both volume buttons, continue holding and plug in usb. You should be in download mode, now retry odin with GTG ultimate unbrick.
This phone is never really bricked, ive flashed a wrong bootloader using heimdall and nothing would turn on and i was still able to odin back to stock.

[Q] HELP! bricked!

i was flashing stock 2.2 back on my captivate and it rebooted. nothing happened after that. i cant turn on my phone and i tried getting into download mode. What should i do? Am i hard bricked?

the three button combo doesn't work? to get back into download mode.

One method that worked for was:
1. take the battery out
2. Take sim card and sd card out (just in case...)
3. Hold the two volume buttons
4. Insert the usb cable and keep holding the volume buttons.
5. When the phone detects the signals in the cable it should go into download mode
Good luck
Sent from my SAMSUNG-SGH-I897 using XDA App

no luck. :C can the unbrickable mod be applied to my phone?

Hold the Volume up, down, and Power Button, try going into recovery mode.

Still no response.

Gengar6 said:
Still no response.
Click to expand...
Click to collapse
Download One-Click UnBrick that should work.
http://forum.xda-developers.com/showthread.php?t=1153310

Somewhere on xda one of the devs created and posted a very compact software solution this problem.
For the life of your caotivate I cannot locate it right now... but I know there is a solution to this problem.
Try searching on google as well as xda ( I usually search on google with "site:xda-developers.com" after to search only this site ) for "captivate soft unbrick" or something similar. When I'm on a comp I will try to find the thread and post on here. But in the mean time... step away from it and take a deep breath.. it may get more frustrating before you see that boot animation again.
Good Luck
And remember, the only way to brick the captivate is to use a hammer ;-)
Sent from my SAMSUNG-SGH-I897 using XDA App

Yeah... Forget my posts read Allens. He got it done!
Sent from my SAMSUNG-SGH-I897 using XDA App

the one click didnt work. my phone has a black screen and wont go into download/recovery. :'C

Alright then follow these instructions.
What you need:
Odin: http://forum.xda-developers.com/showthread.php?t=731989
USB Cabel
Steps:
Remove battery, SIM card and micro SD card.
Open Odin on the computer.
Put the battery back in.
Plug in the USB cable to the phone.
Hold both volume up and down.
With VOL up/down held in, plug usb cable to the computer.
Your phone will show the DOWNLOADING yellow image.
Recommended: I recommend you to save all your files when you plug in your USB to your Computer so when you have any issues you can restore it back.

Allen, i already tried that and no results.

Gengar6 said:
no luck. :C can the unbrickable mod be applied to my phone?
Click to expand...
Click to collapse
yes... this!!
all this other crap is just spinning your wheels if you get absolutely nothing out of it.

Thread closed
Questions belong in Q&A.

Galaxy S 4G Issue

I hope i'm in the right board for this, if not i'm sorry, but i've run into a major issue recently.
While working on installing MIUI on my Galaxy S 4G from Tmobile I hit a point where it turned offand absolutely nothing is happening. I don't remember when exactly this happened but I think it was after something with odin.
It's not detected by Kies or anything, it's just off and nothing can get it to turn back on. I left it on the charger and went to sleep last night, this morning it still isn't doing anything.
Any help would be greatly appreciated.

In the state that it's in, I believe the phone will still boot into Download Mode, even though nothing appears on the screen. Odin will still recognize the device if it is booted into download mode.
Just open the back cover and remove the battery. It is also recommended you remove the SD card and SIM card. Put the battery back in, and connect the usb cable while holding the power up button, and plug it into your computer. Open up Odin and it should recognize the device still. If it doesn't, try these steps again until it does.
Since you were trying to flash MIUI, we should be safe to assume you're running Gingerbread on your SGS4G, so you can download a stock, Odin flashable ROM from here. Flash that using the PDA in Odin, let it reboot, and you should be fine again.
If you have any further questions that need answering, refer to the SGS4G community.

pudgybunnyBry said:
In the state that it's in, I believe the phone will still boot into Download Mode, even though nothing appears on the screen. Odin will still recognize the device if it is booted into download mode.
Just open the back cover and remove the battery. It is also recommended you remove the SD card and SIM card. Put the battery back in, and connect the usb cable while holding the power up button, and plug it into your computer. Open up Odin and it should recognize the device still. If it doesn't, try these steps again until it does.
Since you were trying to flash MIUI, we should be safe to assume you're running Gingerbread on your SGS4G, so you can download a stock, Odin flashable ROM from here. Flash that using the PDA in Odin, let it reboot, and you should be fine again.
If you have any further questions that need answering, refer to the SGS4G community.
Click to expand...
Click to collapse
Thanks for the help, currently i'm attempting to get Odin to recognize it with no success. I've gone through the process about 3 times and will continue till I hopefully get some results. If it makes any difference I don't hear the sound of windows detecting a new USB device anymore like i use to when I would put it into download mode.

As far as I remember, Windows doesn't make a sound when booting into Download Mode. I just realized I made an error in my previous post. You need to be holding the volume up button when you plug it into the computer. In some cases you will need to hold the power button at the same time. Try giving it the volume up + power on button when you plug into your PC. Make sure you're holding the button combo long enough for the SGS4G to power on and into Download.

Moved to General Q&A.