Database Info

[Q] Telus Milestone boot errors / wont recover

Hello,
I have a Telus milestone that I am using on ATT in the USA. Earlier tonight I installed app2sd. Everything was great, then when I restarted my phone it booted up goes to the unlock screen, I slide it to unlock and it gives me all these force closures, I am unabel to get past them. When I go to the Android system recovery and attempt to reflash the firmware it says:
verifying package...
E: failed to open /sdcard/update.zip (no such file or directory).
E: signature verification failed
install aborted.
I am going nuts, last time I had an issue I was able to reflash the firmware through the above process and worked fine. Now I cannot get it to do anything. I cannot get it to flash, and when I let it boot all the way I am unable to get the main screen. any suggestions? I really love this phone and want to get it working again. Please help.......

I forgot to mention, I had launchpro or launcherpro home screen installed. I think that when I installed the app2sd it might have copied that to the card, and now its missing on the device internal memory. That is why its not giving me the main screen or anything beyond just a force close screen.

jgregoryj1 said:
Hello,
I have a Telus milestone that I am using on ATT in the USA. Earlier tonight I installed app2sd. Everything was great, then when I restarted my phone it booted up goes to the unlock screen, I slide it to unlock and it gives me all these force closures, I am unabel to get past them. When I go to the Android system recovery and attempt to reflash the firmware it says:
verifying package...
E: failed to open /sdcard/update.zip (no such file or directory).
E: signature verification failed
install aborted.
I am going nuts, last time I had an issue I was able to reflash the firmware through the above process and worked fine. Now I cannot get it to do anything. I cannot get it to flash, and when I let it boot all the way I am unable to get the main screen. any suggestions? I really love this phone and want to get it working again. Please help.......
Click to expand...
Click to collapse
Sounds like you partitioned your card for apps2sd and wiped out everything that was on it in the process. So any files, media, backups etc you had on the card might be gone now - and also the update.zip from whatever custom recovery you use (skrilax OpenRecovery, G.O.T OpenRecovery, etc) would be gone. I do hope you saved your nandroid backups somewhere else other than on the card itself.
The most direct way back to a bootable phone (as long as you don't mind out wiping any other mods you've made) is to flash an SBF file using RSDLite from the bootloader mode. Try flashing the service version, and if it still won't boot, try flashing the non-service version.
http://and-developers.com/sbf:milestone
If you do have a backup you want to restore, or if you just want to undo the apps2sd mod using the function available in the recovery you were using (if it has one), then you will need to place the custom recovery folder and update.zip back on the SD card and then you'll be able to boot into it.

I tried the flash file from the Telus Service version and it failed. I will try the other non service. I did take a look at my sdcard and all my files are still on it. I will use another sdcard for the non service version. Thank you for your help. Will leave reply on what happens. thank you again.

Okay. I have tried both the service and the non service versions. nothing happens. it just says no such file or directory. I am totally stumped. I have tried to reflash with other recoverys GOT and its the same results. I am at a loss as to what to do. Any suggestions?

When I try to do a factory reset it does not do anything, its says wiping, but everything is still on the phone. hmmm... I am at a loss as to what to do.

Okay. I had to download RSD lite, and use the power button / dpad up. I was then able to reflash. Whoo.... thought I was gonna hae a serious panic attack. Thank you for your input. I really apreciate it

You're welcome. The mode which allows RSD Lite to flash is the bootloader. On the Milestone it acts as the "master reset switch" if anything borks too completely.
Sent from my Nexus One using XDA App

I have my milestone back to stock rom. I tried to do the app2sd again and it just put the phone in a boot loop. So I just removed it and did another reflash back again.
I have a question though. As I was reading about how to fix my phone last night I came across a modified version of the Telus Milestone firmware called TelusLite. I downloaded it, but it does not have a sbf file. It is a nandroid md5 file and a couple other files. How do I installl it? I tried repeatedly. I even tried the G.O.T. open recovery, I mean I tried to install that by the camera button/power button menu. But it just stops it saying no file or folder found. I am learning a lot about the phone and how it works but I cannot figure out how to install G.O.T. or any other open recovery software. Any help would be appreciated.

Please help me, my XT720 brick huhu

after flash boot5.img of fifacon,My phone failed to come home launcher, it is only in the M logo and reboot. I tried using RSD lite to flash the 2.1 EU, 2.1 kr or 2.2 Kr but have to reboot the M logo

im not sure at all but did u wipe data/factory reset? im not sure if doing that is necessary though....

leuleu9x said:
after flash boot5.img of fifacon,My phone failed to come home launcher, it is only in the M logo and reboot. I tried using RSD lite 2.1 to flash the EU, 2.1 kr or 2.2 Kr but have to reboot the M logo
Click to expand...
Click to collapse
Ähhmmm, you cannot flash the kernel, as we have a locked bootloader.
The kernel has to be loaded by fastboot every bootup.
I have never tried this but I think flashing a new official sbf should fix it.

I can not get into recovery, because my volume button up was broken . Who have other way to wipe data or go to recovery?
thanks everyone

leuleu9x said:
I can not get into recovery, because my volume button up was broken . Who have no other way to wipe date or go to recovery?
thanks everyone
Click to expand...
Click to collapse
try this way ,
-take the sdcard out and
- leave the phone without sdcard and then flash the stock 2.1 sbf with the RSD

mediaon said:
try this way ,
-take the sdcard out and
- leave the phone without sdcard and then flash the stock 2.1 sbf with the RSD
Click to expand...
Click to collapse
I tried but impossible

https://motorola-global-en-aus.cust...one-xt720---master-reset-/-factory-data-reset
You can get to the triangle screen, but you can't do the volume up+gallery down+tap camera step? Is your volume button completely broken or just mostly broken? The Motorola recovery will let you try repeatedly to get in. You can keep trying until you need to recharge. You just have to get in once... So if your volume up works 1/100 tries you can easily try 100 times very quickly in Motorola recovery... Just to be clear: to get past the triangle screen you need to hold down gallery and volume up and while holding them down you have to tap the camera shutter. So hold down the gallery and try holding the volume up different ways while repeatedly tapping the shutter until you get in. Once you're in do a factory reset (Motorola recovery uses gallery key instead of camera to select).
If that doesn't work... regarding RSD: there are two flavors of sbf. A "service" sbf doesn't leaves the /data partition untouched. So, depending on which flavor of sbf you've been using, your data partition may not be being erased when you flash SBF. /data is CG37. /cache is CG40. See if your sbf includes those. Actually according to http://and-developers.com/partitions:cdt there's a good chance that CG37 and CG40 aren't signed. So, you may be able to create a "factory reset" SBF that only contains CG37 and CG40 from a nandroid backup if you have one. I don't know how to do that though. Just and idea.

Mioze7Ae said:
https://motorola-global-en-aus.cust...one-xt720---master-reset-/-factory-data-reset
You can get to the triangle screen, but you can't do the volume up+gallery down+tap camera step? Is your volume button completely broken or just mostly broken? The Motorola recovery will let you try repeatedly to get in. You can keep trying until you need to recharge. You just have to get in once... So if your volume up works 1/100 tries you can easily try 100 times very quickly in Motorola recovery... Just to be clear: to get past the triangle screen you need to hold down gallery and volume up and while holding them down you have to tap the camera shutter. So hold down the gallery and try holding the volume up different ways while repeatedly tapping the shutter until you get in. Once you're in do a factory reset (Motorola recovery uses gallery key instead of camera to select).
If that doesn't work... regarding RSD: there are two flavors of sbf. A "service" sbf doesn't leaves the /data partition untouched. So, depending on which flavor of sbf you've been using, your data partition may not be being erased when you flash SBF. /data is CG37. /cache is CG40. See if your sbf includes those. Actually according to http://and-developers.com/partitions:cdt there's a good chance that CG37 and CG40 aren't signed. So, you may be able to create a "factory reset" SBF that only contains CG37 and CG40 from a nandroid backup if you have one. I don't know how to do that though. Just and idea.
Click to expand...
Click to collapse
Do you compress CG37 and CG40 to a ***.sbf and sent it to me, please?
And, how to convert data.img to cg37.smg ?
huhu, I can't open the recovery and wipe data because volume up broken .

leuleu9x said:
Do you compress CG37 and CG40 to a ***.sbf and sent it to me, please?
And, how to convert data.img to cg37.smg ?
huhu, I can't open the recovery and wipe data because volume up broken .
Click to expand...
Click to collapse
Here are CG37 and CG40 from the Cincinnati Bell 2.1 sbf--it should work with the 2.1's. I don't know how to convert them to smg. Which sbf are you flashing? SKT 2.1? SKT 2.2?

Mioze7Ae said:
Here are CG37 and CG40 from the Cincinnati Bell 2.1 sbf--it should work with the 2.1's. I don't know how to convert them to smg. Which sbf are you flashing? SKT 2.1? SKT 2.2?
Click to expand...
Click to collapse
I flashing SKT 2.1

Mioze7Ae said:
Here are CG37 and CG40 from the Cincinnati Bell 2.1 sbf--it should work with the 2.1's. I don't know how to convert them to smg. Which sbf are you flashing? SKT 2.1? SKT 2.2?
Click to expand...
Click to collapse
I've tried your way but to reboot, hic. I think it has corrupted the bootloader

leuleu9x said:
I flashing SKT 2.1
Click to expand...
Click to collapse
My copies of both STSKT_N_79.11.39R and STSKT_N_79.33.50R don't have CG37 (/cache), but they do have CG40 (/data). But STR_U2_01.1E.0 (UK) and STR_U2_04.1E.1 (US/CBW) do have CG37. I'm not sure if Milestone XT720 ROMs are expected to work on Motoroi, though. I've always had to factory reset when flashing Motoroi ROMs on my Milestone XT720, but maybe that's because of the missing /cache partition...
What you may want to do is use RSD Lite to compare the partition structures of STR_U2_01.1E.0 (UK) and STSKT_N_79.11.39R. If they are identical (except for the missing CG37) I think you can create a new sbf that has it. I can't remember the program's name off the top of my head, but I think I can find it. brb
Edit: I think this is the program: http://modmymobile.com/forums/402-general-motorola-android/530781-sbf-depacker-1-3-03-22-2011-a.html You can expand the sbfs into a directory and then copy parts and use the program to rebuild a new sbf.

leuleu9x said:
I've tried your way but to reboot, hic. I think it has corrupted the bootloader
Click to expand...
Click to collapse
Oh, jeeze. I just realized... you can't even get to the bootloader, right? Because volume up + camera while powering on? So you can't even flash SBF, right? Oy.... That's a pretty important key. Are you out of warranty?

sad and cry
Mioze7Ae said:
Oh, jeeze. I just realized... you can't even get to the bootloader, right? Because volume up + camera while powering on? So you can't even flash SBF, right? Oy.... That's a pretty important key. Are you out of warranty?
Click to expand...
Click to collapse
I take it to the motorola centre but they said hardware failure, and the main loss of $150 to replace, huhu. I take it to the pantry and do not edit anymore hopefully the latter will have to fix.

help me, please
Mioze7Ae said:
Oh, jeeze. I just realized... you can't even get to the bootloader, right? Because volume up + camera while powering on? So you can't even flash SBF, right? Oy.... That's a pretty important key. Are you out of warranty?
Click to expand...
Click to collapse
Now I on bootloader and recovey (because I repair Volume up )., but recovery have some line :
Android system recovery (2e)
Use Volume Up/down to highlight: Camera_mode Ke
reboot system now
apply sdcard :update.zip
wipe data/factory reset
wipe cache partition.
and some corrup:
E:Missing bitmap progress_bar_empty_left_round(code -1)
E:Missing bitmap progress_bar_empty(code -1)
E:Missing bitmap progress_bar_empty_right_round(code -1)
E:Missing bitmap progress_bar_empty_fill(code -1)
E:Missing bitmap progress_bar_right_round(code -1)
E:Can't open /cache/recovery/command

I may suggest, try to use sfb_flash program from this links:
http://blog.opticaldelusion.org/2010/05/sbfflash.html
http://blog.opticaldelusion.org/2011/02/sbfflash-updates.html
and some info about using it fine:
http://ubuntuforums.org/showthread.php?t=1576255
You could use a LiveCd disk and load a linux version like Ubuntu, and try to use from it putting the SBF flash file on another memory card on oanother usb port of Your pc.
For use this I use the keys: POWER+VolumeDOWN+CameraSHUTTERButton (no media button), also a way could be remove the battery and then grab the phone in a way that You could maintain this 3 buttons pressed and while are pressed insert the battery in the proper position, in my case, it will put the phone in bootloader mode and after following the instructions for SBF_FLASH, I connect first the usb cable to the cell phone AND THEN to the usb port of the pc (This because after plug attach the cable to the cell phone, I put it resting on table or desk, so the microusb connector is so small and tiny that a little movement may produce a fault contact between cable and connector and produce a bad flashing, but by putting on table and safe is MORE manageable connect at last the USB plug on the PC side since is bigger and with more surface contacts so less chance of a fault contact by a bad movement.
The beauty of sbf_flash is that after make the command run and be in the state "waiting for phone", you only need to plug the usb cable to the pc and the flash starts automatically and ends so with feedback on screen along the process is made and checked.
Hope that may helps, I use linux for my stuff , but also, for this specially since the abd install make so many troubles for me and sbf_flash simply works nice and clean everytime that I need it.
best regards!

i have same problem with leuleu9x , i have a motoroi, and it bricked, somebody help me

minhductxn said:
i have same problem with leuleu9x , i have a motoroi, and it bricked, somebody help me
Click to expand...
Click to collapse
chắc hết thuốc chữa bạn ạ, có khi nó chết boot rồi

Stuck in Bootloop

Hey guys,
i don't realy know why, but by phone crashed yesterday, and since then i'm stuck in bootloop. I can't even enter the RecoveryMode, i always get an Symbol with a phone and a 'TrafficSign'(Don't know the name of this).
The only thing i can do is enter the fastboot bootloader... i can't even charge the phone anymore...
H E L P!!!!!!!

opiswahn said:
Hey guys,
i don't realy know why, but by phone crashed yesterday, and since then i'm stuck in bootloop. I can't even enter the RecoveryMode, i always get an Symbol with a phone and a 'TrafficSign'(Don't know the name of this).
The only thing i can do is enter the fastboot bootloader... i can't even charge the phone anymore...
H E L P!!!!!!!
Click to expand...
Click to collapse
Hi opiswahn, you can try to flash rsd lite to reformat your back to stock. First download rsd lite and sbf files of your preference (I am using singapore sbf). Then open your phone while holding power button, sound up, media together. You will go into bootloader mode (black screen). Now flash rsd lite from your cpu and your phone should be alright. Hope it helps you.

thx for the reply, but RSDFlash won't let me flash... see picture

Maybe another version of RSD lite and/or try to run it in XP compatibilty mode.
I had the same situation like you in the screenshot when I installed an sbf using Windows 7 on the neighbour's PC.
But I can't remember clearly what was the key to get it working as it was in february.
Since then no more sbf ...
Milestone XT720 - CM6.3.0 RC3

WinXP did the trick, tried before running as admin or in compatiblity-mode, but nothing worked, so i tried a WinXP VMWare, and boom, it works!
*Edit*
Aw, damnit, every time rsd tries to write to the phone the VM crashes...

opiswahn said:
WinXP did the trick, tried before running as admin or in compatiblity-mode, but nothing worked, so i tried a WinXP VMWare, and boom, it works!
*Edit*
Aw, damnit, every time rsd tries to write to the phone the VM crashes...
Click to expand...
Click to collapse
Try this
Go on control panel , click on system , click on andvanced system settings then on advanced tab click settings under performance then the advanced tab and click change under virtual memory, then custom size and choose it the size u want it to be ,but bare in mind not to low and not to high , keep it under 3000MB
Also I found that OR sometimes gets corrupt. Most of the time if you just re-unzip the recovery and replace all the items in the Openrecovery folder (except the Updates b/c you'll lose whatever is in there when you overwrite it) on your PC and then xfr over to SD cardyou then you can enter recovery like normal. That usually does the trick. In fact that happened to my wife's phone last night and I fixed it up just like that.
I always hate flashing sbf when I can just restore a nandroid. Not sure if it will work since you started the sbf already.

I had the same issue with RSD Lite 4.6. I found a 5.0 with no problem. But now I saw yours! How ironic.

enter moto's recovery, do "factory reset"

You need to enter bootloader mode, not the fastboot bootloader.
Sent from my MilestoneXT720 using XDA App

Stuck in boot loop after upgrading to Bravo 2.2 v1.6 by brianlee+updates0926_bravo1.6
Help! My phone is experiencing the same thing... stuck in boot loop. The operator's logo (Singapore Starhub) keep appearing again... again... and again.
I upgraded it the from dexter's rom to Bravo 2.2 v1.6 by brianlee. I've followed all instructions below but after I install the update, my phone stuck in boot loop.
Instructions
Download 1.6 from one of the links above.
Download the Update from above.
Extract the contents of the 1.6 download.
Copy the contents of the sdcard folder to the root of your sd card. (You can skip the OpenRecovery files and just copy the nandroid folder if you already have OR).
Copy the update ZIP file into /sdcard/OpenRecovery/updates
Reboot into OpenRecovery
Nandroid > Restore > bravo2.2-brian
Apply Update > update-bravo1.6Mz-20110926-1328.zip
Wipe Cache, Wipe Dalvik, Factory Reset
My phone run perfectly well and after I apply this update (updates0926_bravo1.6.zip), I'm stuck in boot loop.
I've tried many ways to recover my phone, but none is successfull, including this thread. I've tried the camera button+power button and then volume up button. And this message appears on the screen: "E:Can't open /cache/recovery/command" with phone picture and exclamation mark on the background.
RSDlite 4.9 + sbf file can't detect my phone.
Can someone help me? Can I restore my phone?
---------- Post added at 02:36 PM ---------- Previous post was at 02:00 PM ----------
Sorry, I can recover my phone. I tried to press power button+volume up button+media button all at once and the recovery mode appeared. I applied the proper update and voila... My phone is working again.

[Q] My USB port isn't working; how to get rid of CM7 and restore Froyo?

My phone is dying prematurely, with my camera crapped out and my usb port not fully functional. My phone can charge but it can't be recognized by a computer anymore.
I'm sending it in for a replacement, but I realized now that I can't flash back to Froyo easily. I'm stuck in CM7, and factory reset brings me back to a fresh CM7. I don't want Motorola to use the fact that I used CM7 as an excuse to charge me $300.
Can someone help me please?

you can try restore froyo nandroid backup via custom recovery...

I'll have to remenber tha latest SBF that you flashed on your devide, have a friend with a Defy, flash it on that Defy, give him your SD card to put a full nandroid backup on it ...

basically you need to restore a nandroid backup of froyo of your region since you cannot flash the full sbf. There are already nandroid backups available in xda.
If you have wifi use a simple app called Ftpdroid to copy it to your memory card and restore.
If you do not have wifi then try coping the file using a card reader and restore.
Sent from my MB525 using Tapatalk

I have on my defy cm7 but don't work autofocus and i would to try the rom of defy + . I have to flash froyo ?

inst.
Zinshin said:
My phone is dying prematurely, with my camera crapped out and my usb port not fully functional. My phone can charge but it can't be recognized by a computer anymore.
I'm sending it in for a replacement, but I realized now that I can't flash back to Froyo easily. I'm stuck in CM7, and factory reset brings me back to a fresh CM7. I don't want Motorola to use the fact that I used CM7 as an excuse to charge me $300.
Can someone help me please?
Click to expand...
Click to collapse
FOLLOW THESE STEPS ::
>POWER OFF, PRESS AND HOLD POWER ON + VOL DOWN Till you get recovery mode , erase all data and wipe cache.
>reboot and keep on holding volume up key to get your phone in bootloader mode.
>connect your phone with your PC, open RSD LITE 4.9 , select your full sbf flash file and flash your phone.
NB::install all the drivers from Motorola driver installer or MOTOROLA PHONE TOOLS onto your pc before flashing. CHECK OUT http://forum.xda-developers.com/showthread.php?t=853674 or you can download and install these http://goo.gl/PrA6C
AND you can find the full froyo sbf for your region from the list http://forum.xda-developers.com/showthread.php?t=966537

rachit2588 said:
FOLLOW THESE STEPS ::
>POWER OFF, PRESS AND HOLD POWER ON + VOL DOWN Till you get recovery mode , erase all data and wipe cache.
>reboot and keep on holding volume up key to get your phone in bootloader mode.
>connect your phone with your PC, open RSD LITE 4.9 , select your full sbf flash file and flash your phone.
NB::install all the drivers from Motorola driver installer or MOTOROLA PHONE TOOLS onto your pc before flashing. CHECK OUT http://forum.xda-developers.com/showthread.php?t=853674 or you can download and install these http://goo.gl/PrA6C
AND you can find the full froyo sbf for your region from the list http://forum.xda-developers.com/showthread.php?t=966537
Click to expand...
Click to collapse
My computer does not recognize my phone when it's in Bootloader mode.
I installed the Nordic Rom to use CM7. So I need a nandroid backup. Does anyone know where I can get one?

Whenever I try to connect my phone to USB...
It says there's an error with the device. Windows 7 reports an unknown device, and error 47. That's why I believe there is something wrong with my usb port.
Progress:
I can't load into CM7 anymore, nor the stock rom. I can access the CM7 boot menu however, and go into Clockwork.
I tried a Motorola factory reset, and I tried changing the boot sequence (stock, 2nd-init, 2nd-boot) but no luck.
I'm a little stuck here guys

Have you installed USB drivers? Check all in beginners guide.
Sent from my MB525

You talk about your Defy not being recognized as USB disk?
Did you disable USB Debugging? So the USB Mass Storage option can be enabled after.

The data function in my usb port isn't working, my phone cannot be recognized at all. Even with three different cables and drivers installed.
Any ideas?
Is there a way to repair the port?

Could it have water damage? If it could, let the cap open and let it rest for a couple if days. Open it up and check for visible signs of damage/corrosion. Would not do this if you are trying to claim warranty.
To restore, go to the sbf threat, there are links to the individual threats of each. Normally, you can find there the nand. Place it in the right folder and restore it with cwm. Remove the battery and go to stock recovery. Wipe cache and data. Try to remember what sbf you were on, but don't think it matters much... Don't guaranty it will work. You could try to find someone who wants to try it as they can always flash a sbf if it doesn't work.
Sent from my MB525

i can help u with a nand of any sbf u want...just send me a pm or post here and in 1 hour i will upload it
just be sure u say the correct one, coz any boot cm7 version changes ur kernel, and the nand wont work
LE: after u restore the nand, just use the moto recovery, wipe data/cache so ur phone is back to stock, no root no custom recovery and u can take it to warranty
LLE: i guess i need to make a nand of the tmobile us version also so u can return it to the shop

Hmmm
Hmm but I flashed a nordic sbf. :/
I don't mind restoring nordic though, as long as there's no sign of cyanogen mod. I can replace the bootlogo and animation there.

I have used Cyan 7 for months with none of the problems you are describing. I also dont use any base and wonder why people are so pushy on using a base.
I go into recovery, Wipe all, Then install cyan then gapps.
It sounds to me you did or didnt do something during install.
Download the newest cyan 7 rom
Get into the stable recovery and wipe everything, even dalvik under advanced
Flash cyan
Flash gapps
reboot.
I promise it will work

Base doesn't matter, it gets replaced by stable releases. I think he tries to restore it to claim warrant.
Sent from my MB525

I think you may have overreacted and made things worse. Sometimes my data function stops working in CM7 - it fixes itself after a warm reboot or two.

D2G Cant do nothing, Help Plz!

Hi guys, i need help with a D2G, the phone is not mine i am trying to fix it, the problem is, that i cant flash any custom rom or stock SBF on it since the owner formating the SD card, i cant do factory reset or save current settings, always appear the same setting when i reboot, if i uninstall apps or install new apps, when reboot, the apps installed gone or the deleted apps are there again so weird.. i intall CWM but when reboot nothing happens even pressing Power + X, it just enter to stock recovery but nothing works..
Other thing is in the "System folder of the phone the Recovery folder is not there" i do not know if can be deleted, and if yes.. can it damage the phone?
I already Flash stock SBFs (VRZ_A956_2.4.33_1FF_01.sbf) and now i have
Bootloader
D0.11
Code Corrupt
I have attached a screen capture with the FAIL in RSD when flashing.. the FAIL message appear when is rebooting in the final process.
PS: the phone comes with this procedure & rom >>> http://wiki.cyanogenmod.com/wiki/Motorola_Droid_2_Global:_Full_Update_Guide
Thx in advance !!

There are two possible answers:
1. The SBF file is corrupt.
2. The phone's flash memory is corrupt (aka dead, not usable any more).

Gasai Yuno said:
There are two possible answers:
1. The SBF file is corrupt.
2. The phone's flash memory is corrupt (aka dead, not usable any more).
Click to expand...
Click to collapse
Thx for reply.
a few hours ago i made it funcional, but with the same problem.. cant save settings, in this rigth moment flashing it again.. waiting for process end. Will see what happen...
EDIT. Flash Process FAIL again. I gonna take the phone to a service...
If someone have a solution plz post it..
thx in advance
Cheers!!

Well, your phone's internal flash memory is probably fried.
The solution would be to file a warranty claim with Verizon or Motorola Mobility.

Gasai Yuno said:
Well, your phone's internal flash memory is probably fried.
The solution would be to file a warranty claim with Verizon or Motorola Mobility.
Click to expand...
Click to collapse
Thx for help man. but i am not in the USA, in my country dont have Verizon and Motorola Store.. the was bough on Ebay.. so i think i gonna sell it for parts..
Cheers !!

how did you fix this issue with code corupt? did your phone recognize usb cable? look same issue due this same spb

jararak said:
how did you fix this issue with code corupt? did your phone recognize usb cable? look same issue due this same spb
Click to expand...
Click to collapse
i cant fix the phone, the only thing i do was flash and re flash after 1st flash, and the phone comes alive again, but i have the same problem with the internal memory, no save any changes i made, if i delete an app or change a theme, when i restart the phone, everything is there again or back to the normal, and i cant made a Factory Reset.. the phone is usable but every time that i made a restart all the settings or changes are gone..
Cheers..

most likely bad flash memory
but I would try ezSBF, just to see
[TOOL] ezSBF D2G
some times it works when rsd lite fails

sd_shadow said:
most likely bad flash memory
but I would try ezSBF, just to see
[TOOL] ezSBF D2G
some times it works when rsd lite fails
Click to expand...
Click to collapse
Thx man!! i will try it.
but now i've noticed somthing, when i boot in recovery mode on the bottom appear "Error E:/System/Recovery/ not found" something like that. It can be possible to delete the recovery partition on an Android device?
Cheers mate!!
EDIT: Here is what i get when enter to Recovery, image attached..
i already used ezSBF D2G, but not solve the problem, =(
any solution for that, or the phone is "fckd up"?
Thx in advance!!