So someone calls me, and they get my voice mail where i ask them to please leave their name, number and subject... after im expecting the service to go into record mode but instead the automated voice operator gives the same set of instructions offering more options.... "if you would like to leave a numeric page, please press 1 or remain on the line to leave a message" ....
I never respond to unknown numbers. So that option is pointless imo and wastes time for others calling me. Sure, it sounds petty but I get annoyed when that comes up on me.
im on at&T any way to dissable that to just do voice message, and beep for recording?
Same happens on rogers network in BC...
"hi this is mr X, im not available at the moment please leave a message / operator: please leave a message after the tone" ....
it just restates the obvious.
like i said, its probably petty but... if anyone knows something i'd appreciate it.
There might be a #***#*** set to adjust this?
Same with number of rings before going to voicemail?
I'll be watching this topic as well..
lucky644 said:
There might be a #***#*** set to adjust this?
Same with number of rings before going to voicemail?
I'll be watching this topic as well..
Click to expand...
Click to collapse
this covers how to do amount of rings on an iphone:
http://iphoneguru.org/change-the-amount-of-rings-before-visual-voicemail-answers
im still interested in getting rid of the operator after voice mail.
The idea behind it is too have a caller spend more time on the call to make more money. This is set though your network so I doubt you can change this.
0okami said:
So someone calls me, and they get my voice mail where i ask them to please leave their name, number and subject... after im expecting the service to go into record mode but instead the automated voice operator gives the same set of instructions offering more options.... "if you would like to leave a numeric page, please press 1 or remain on the line to leave a message" ....
I never respond to unknown numbers. So that option is pointless imo and wastes time for others calling me. Sure, it sounds petty but I get annoyed when that comes up on me.
im on at&T any way to dissable that to just do voice message, and beep for recording?
Same happens on rogers network in BC...
"hi this is mr X, im not available at the moment please leave a message / operator: please leave a message after the tone" ....
it just restates the obvious.
like i said, its probably petty but... if anyone knows something i'd appreciate it.
Click to expand...
Click to collapse
There are other voicemail services available, you just set your phone to forward calls to a different number. I'm not sure if youmail has the features you're looking for, but check it out anyways.
www.youmail.com
They notify you via text message and/or email when you get a voicemail, and even send the voice message in the email for you to listen to.
I have a htc magic with cursorsense rom.. I can't figure out how to send unknown callers to voicemail, but im able to do it with regular unblocked numbers.. Ive tried creating a new contact labeled "unknown" and clicking the "send directly to voicemail" button.. but it does not work.. can someone help me?
bump... ttt
I've never tried it, but this might do the trick: http://www.freewarepocketpc.net/ppc-download-call-firewall-v1-4.html
thanks for the suggestion.. it seems that app only has an option to reject all calls that are not from "my contacts" list.. meaning anyone calling you that is or isnt unknown will be rejected.. i want something that will do it for unknown calls only and let all other calls go through.. thanks anyways
http://googlevoiceblog.blogspot.com/2010/03/faster-google-voice-experience-on.html
Not sure if this was already posted, but no more relying on SMS for syncing!!!
Until I can see confirmation that this is effective and is not going to drain my battery, I'm staying put with the workaround which works great and works in seconds.
I have not used Google Voice a ton, but the new version seems to be tons slower at notifications. Today they took about about an hour to come.
Hell yeah! :d:d:d
anyone notice that when you call out use GV, it still displays your regular cell phone number rather than your GV number to the person you call. is there a way to fix this?
ajaholic said:
anyone notice that when you call out use GV, it still displays your regular cell phone number rather than your GV number to the person you call. is there a way to fix this?
Click to expand...
Click to collapse
if you got the GV app and you're using it "for all calls" it should display your gv number...
PS the delay is about AT MOST 1-2 minutes on my hero... (side by side with internet inbox i mean) still better than AT LEAST 5minutes
ajaholic said:
anyone notice that when you call out use GV, it still displays your regular cell phone number rather than your GV number to the person you call. is there a way to fix this?
Click to expand...
Click to collapse
if you're on a 2.1 rom GV doesn't work properly for making calls but i found this app in the market called gvoice callback that does the trick
ajaholic said:
anyone notice that when you call out use GV, it still displays your regular cell phone number rather than your GV number to the person you call. is there a way to fix this?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=5840612&postcount=25
works for me on DC v1
Can anyone confirm the new versions notifications does work correctly????
Does anyone know how to set Hero 2.1 to have to auto forward to GV so I can use that for my voicemail instead of Sprint? In fact does anyone know where the call forwarding is?
RLothar said:
Does anyone know how to set Hero 2.1 to have to auto forward to GV so I can use that for my voicemail instead of Sprint? In fact does anyone know where the call forwarding is?
Click to expand...
Click to collapse
For Call Forward - No Answer, dial *73(your GV number)
energizer1389 said:
Can anyone confirm the new versions notifications does work correctly????
Click to expand...
Click to collapse
Running on a 1.5 ROM (TTG), the notifications in the new version do in fact work properly, and instantly. Woohoo, finally! In fact, while I was cleaning up old 'unread' messages via my PC, my phone was going 'ding' every time I deleted one and the 'new message' notification count changed.
RLothar said:
Does anyone know how to set Hero 2.1 to have to auto forward to GV so I can use that for my voicemail instead of Sprint? In fact does anyone know where the call forwarding is?
Click to expand...
Click to collapse
When you are activating the feature on Google, as per instructions here at https://www.google.com/voice/sprint I believe they actually show you the code, *28XXXXXXXXXX, to punch in. Looking around now, I had to search a bit to find it, as I couldn't remember from doing it myself. Anyways, that is it, *28[Your GV Number], and then *38 if you ever want to turn it off.
I was using the SMS workaround. Just disabled SMS to my phone and left a test message.
I received notification on my phone within a minute.
Now, does it drain the battery? I wouldn't think it would as it is push and not a pull.
Oh, and the LED works.
askwhy said:
Running on a 1.5 ROM (TTG), the notifications in the new version do in fact work properly, and instantly. Woohoo, finally! In fact, while I was cleaning up old 'unread' messages via my PC, my phone was going 'ding' every time I deleted one and the 'new message' notification count changed.
When you are activating the feature on Google, as per instructions here at https://www.google.com/voice/sprint I believe they actually show you the code, *28XXXXXXXXXX, to punch in. Looking around now, I had to search a bit to find it, as I couldn't remember from doing it myself. Anyways, that is it, *28[Your GV Number], and then *38 if you ever want to turn it off.
Click to expand...
Click to collapse
*28 and *38 don't work for me, but the following do:
Call Forwarding - Unconditional = *72(number), *720 to turn off
Call Forwarding - No Answer = *73(number), *730 to turn off
Call Forwarding - Busy = *74(number), *740 to turn off
ripleys said:
*28 and *38 don't work for me, but the following do:
Call Forwarding - Unconditional = *72(number), *720 to turn off
Call Forwarding - No Answer = *73(number), *730 to turn off
Call Forwarding - Busy = *74(number), *740 to turn off
Click to expand...
Click to collapse
Fair enough. All the same, *28 is the official code for covering both conditions that normally required *73 and *74. It worked fine for me, and is well documented. Not sure why it wouldn't work for others, but I am no telco expert.
Also, for anyone who was wondering, yes they still charge for *72 (unconditional).
askwhy said:
Fair enough. All the same, *28 is the official code for covering both conditions that normally required *73 and *74. It worked fine for me, and is well documented. Not sure why it wouldn't work for others, but I am no telco expert.
Also, for anyone who was wondering, yes they still charge for *72 (unconditional).
Click to expand...
Click to collapse
*28 also works for call forward - busy? For those using *28, how does this work/get along with call waiting?
ripleys said:
*28 also works for call forward - busy? For those using *28, how does this work/get along with call waiting?
Click to expand...
Click to collapse
First question: Yes, it does. I dug around a bit for come clarification and found this.
See comment from that article:
One is for CFB, the other for CFNA. *28 does both CFB and CFNA in one shot.
Click to expand...
Click to collapse
Second question: Not sure how *28 has affected call waiting specifically, but I can tell you that I hate trying to answer a second call in general since I started using GV. It's been a while since I bothered to try, in fact. I remember a few times pressing 'Answer' only to then have a GV voice prompt ask if I wanted to answer the second call or 'add it' to the existing call, and by the time it asks, the 2nd caller is gone and I am lucky to get back to the first. I got frustrated and stopped answering second incoming calls as there is rarely anyone I want to talk to that badly (including clients).
I doubt that my call waiting rant is helpful, but I had to get it off my chest. Whew!
askwhy said:
First question: Yes, it does. I dug around a bit for come clarification and found this.
See comment from that article:
Second question: Not sure how *28 has affected call waiting specifically, but I can tell you that I hate trying to answer a second call in general since I started using GV. It's been a while since I bothered to try, in fact. I remember a few times pressing 'Answer' only to then have a GV voice prompt ask if I wanted to answer the second call or 'add it' to the existing call, and by the time it asks, the 2nd caller is gone and I am lucky to get back to the first. I got frustrated and stopped answering second incoming calls as there is rarely anyone I want to talk to that badly (including clients).
I doubt that my call waiting rant is helpful, but I had to get it off my chest. Whew!
Click to expand...
Click to collapse
Thanks for the info. I use call waiting a good bit. I often put my kids on hold when a business call comes in, so I'll stick with *73, but just for grins I'm gonna call Sprint and complain that my *28 isn't working.
Does anyone know if it is possible to have two different voicemail messages based on the number the other person dials? I know I can set up different messages for different groups, but I want one message for people who dial my cell # and one message for people who dial my GV#.
Two or three times now its happened where if someone calls my phone and I miss the call, after they leave a voicemail I get notified of the voicemail, but then my phone starts ringing again instantly and the caller ID shows my own number. If I try to answer that "call" I get silence, then some random number dialing, then it disconnects. Any ideas?
The first time it happened I thought whoever had called just called right back but I missed that call as well. When I looked at my call log, it shows my own number as a missed call. It just happened now as I was sitting at my desk, I didnt answer because I was on my office phone, and just as I got the notification, I got another call from my own number. Seems odd to me...
Anyone else getting this ever?
~T.J.
EDIT: ARHD 3.6.7 and included kernel. Its happened on other versions of ARHD also however.
ive never had that issue due to my rom or hardware but i kno theres apps out there were someone can call you and itll show any # they want, including your own. If your rooted try a full wipe and fresh install otherwise someone can be messin with u
02CWRX said:
Two or three times now its happened where if someone calls my phone and I miss the call, after they leave a voicemail I get notified of the voicemail, but then my phone starts ringing again instantly and the caller ID shows my own number. If I try to answer that "call" I get silence, then some random number dialing, then it disconnects. Any ideas?
The first time it happened I thought whoever had called just called right back but I missed that call as well. When I looked at my call log, it shows my own number as a missed call. It just happened now as I was sitting at my desk, I didnt answer because I was on my office phone, and just as I got the notification, I got another call from my own number. Seems odd to me...
Anyone else getting this ever?
~T.J.
Click to expand...
Click to collapse
I could only think this is your phone's way of telling you to check your voicemail. usually, on t-mobile anyway, if you dial your own cell phone number it redirects you to your voicemail. It could be an error with your firmware or network though. Have you made any changes to your phone recently (i.e. ROM change/update)? Think of any possible conditions that may have changed with your phone since this started. Have you contacted your provider? Check your online call history through your carrier site and see if the same number appears at the time of call. If it does, the issue could be someone spoofing you. You can do this with spoofcard/spoofapp. It's hard to actually connect with a phone with the same number you're spoofing though, since it redirects to voicemail. As a precaution, i'd add a pin to my voicemail if I were you- in the event that this is the case. I found this out by spoofing one of my buddies once. In an attempt to boggle his mind, I tried using his number as the number of origin and found out that it directed to his voicemail, giving me access to that information.
It happens if I call my own phone from my house and leave a voicemail. I dont think its anyone spoofing my number. As you said, its almost like the phone gets a notification from a remote computer and a call from it at the same time.
I has done it at least once with every version of ARHD I have ran, but not all the time.
~T.J.
Call up your voicemail and go through the main menu to make sure voicemail paging notifications are turned off.
Ha! I bet that was it! Thanks go to you sir.
It was turned on for urgent messages (which explains why not all did it). When I turned it off and left myself a voice mail test it didn't do it. Weird, I wonder how it got turned on...
~T.J.
I received a call while I was working, I could not answer. I could not answer because I was busy working. I didnt want to answer because I did not know the number. Not being able to answer, the caller left a voicemail. Which turned out to be a blessing in disguise because Im still able to listen to it via voicemail. If I were to have answered I would have thought someone butt dialed me and thought nothing of it and hung up. But after listening to it, I realized that it was my voice and hers.
At first I thought maybe my girlfriends apartment was bugged for whatever reason. The people shes renting from are very reputable. So we went and checked everywhere. Nothing. However, I thought to myself how would they get MY phone number if it is not affiliated in any way to her apartment or where she lives.
So that leads me to think that something may be on my phone. I have since factory reset my phone. The crazy thing about this whole situation is that the conversation that was recorded was from TWO DAYS ago. Who has my number? How are they able to record me? Do I just wait to see if I receive another call? I wont be putting any sensitive information on the device for fear of it being compromised. If I do get another call, Ive already decided Im destroying this one and buying another phone.
I never opened any weird emails. Never downloaded any weird apps. Never opened any links in any received texts. Im on Android 10 on a One Plus 7.
Any input would be greatly appreciated.
here's a possibility - you and your girlfriend were talking and then you butt-dialed someone and it went to their voicemail. That person decided to call you and playback the voicemail. Look in your call log for an outgoing call that you don't recognise at the time of your conversation with your gf.
lightstream said:
here's a possibility - you and your girlfriend were talking and then you butt-dialed someone and it went to their voicemail. That person decided to call you and playback the voicemail. Look in your call log for an outgoing call that you don't recognise at the time of your conversation with your gf.
Click to expand...
Click to collapse
I hadnt thought of that, I checked the records, and there was no butt dial. I called the number that called me and it said it was no longer in service. Looking at the records on my cell providers site and there was no record of that number ever calling me. Which leads me to believe it was spoofed.