Related
Hi there,
I bought a Qtek S200 and I tried to do a ROM upgrade. I followed the instructions given in the website http://kimpeacocke.blogspot.com/2006/06/how-to-perform-rom-upgrade-on-your-i.html
I got the upgrade from this site at ftp://xda:[email protected]_022021_Dopod_PDAMobizEdition_v101.zip
I followed the procedure given in the website given above. After I upgraded successfully the phone has become locked in the boot loader screen. I have done both soft reset and hard reset. Nothing works. The phone gets locked in the boot loader screen. Need help.
Thanks,
Julian
Try to reflash with Qtek ROM instead...
Why you said that it's locked on the Bootloader screen?
Is it frozen or locked?
Hi Rayan,
I tried flashing with the Qtek ROM. I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there. Nothing else happens. I have sent the device back to the guy from whom I bought it.
I got the same problem as Julian - I tried to upgrade with the mentioned ROM and now my device are stucked at the boot screen :?
Some help here ? I'm in same situation
I have an O2 with Dopod rom, after I instaled some software I must to restart and then my O2 are stucked/frozen on Windows Mobile splash screen
Only if I remove the battery I can stop the pda.
I can't do nothing to make him to start. Some ideea ?
:shock:
Later Edit :
solved with http://forum.xda-developers.com/viewtopic.php?t=49298&sid=35f5c1e9e165997b4634ea0c7700ac76
Same issue here with a O2 Xda Neo with German Rom.
Applied the procedure of the prophet wiki : How to CID unlock and Upgrade your Prophet (SPL 2.09 & 2.15)
After step 6 and a soft rest it is stuck in bootloader and will not do anything else, not even off or hard reset...battey has to be removed in order to shut it off....
Any ideas?
Remind me to find the guy who wrote the wiki page on unlocking CID in Prophet......good job pal......
Aaaaarggghhhh %^*^%*^%*^%*
Problem solved..
Hi everyone,
Good news at last. I sent my Qtek S200 to the guy from whom I bought the phone. He fixed it and now I am a happy man. You can check with him if everything else fails. Email him at E gadget Depot ( [email protected]).
All the best..
i tried to upgrade my QTEK S200 with this RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip it got to 95% and then it gives me nbf file cannot work with your PDA. Please help.
I have this problem too, i know only one exit from this situation - i have flash my s200 with RUU_215737_2157135_023021_QTEK_s200_RUS ROM, now it work fine.
you find it her
bootloader issue
I have the same problem too, If anybody know method to fix this problem please help us.
I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there.
THX in advance for you help
Robert
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Please, the links to the solution does not exists anymore.
I need help!!
Qtek S200 stuck in tri-color screen, all flashing so far still does not make it work..
When doing a hard reset I get format failed.
/Jonas
I have same problem!
Anyone can help?
TJSM said:
I have same problem!
Anyone can help?
Click to expand...
Click to collapse
Go to HMA4's upgrade guide or my thread in my signature...
same problem
i have exactly same problem and i couldnt solve it too.So can someone help us?
Please someone explain completely what should we do.
i can not active sync and waiting on the bootloader screen
bacardilima said:
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Click to expand...
Click to collapse
daelee,
you can get normal state, follow the bolded attention at above quote.after entering the 3 colour screen connect USB and you can load the original WM5 ROM on your device. after that, upgrade to any wm6 by the rules and active sync.
the link is dead on that message..
i went to the that page and the link for solution is dead.
http://forum.xda-developers.com/showthread.php?t=376561
find out is there anything that can help!
I tried upgrading to a wm6 rom without knwoing i had to app unlock and supercid my phone... now its stuck on the 3 colour screen!! what can i do???
Reinstall rom again.
Flash original ROM
Flash the original ROM first and then after unlocking your Tornado, flash any ROM you want to upgrade to.
Follow the excellent Kar Hoe's guide to upgrade your Tornado and you will be fine.
you cant flash original rom when its stuck in the colored screen
Yes you can
wel im trying for more then a week now, but no go, no matter what i do or try.
It stays in bootloader 3 colour screen
Original flash file = no go, cause it cant connect to activesync.
mtty = no go , USB port can not open no matter what version of mtty.
ttermpro = no go , can not open.
So if its possible, please tell me how.
muiz2 said:
wel im trying for more then a week now, but no go, no matter what i do or try.
It stays in bootloader 3 colour screen
Original flash file = no go, cause it cant connect to activesync.
mtty = no go , USB port can not open no matter what version of mtty.
ttermpro = no go , can not open.
So if its possible, please tell me how.
Click to expand...
Click to collapse
turn off the phone and redo the ttrermpro steps
When i put the battery in, the phone goes on automaticly.
And goes in 3 colour mode.
And from there nothing works
muiz2 said:
When i put the battery in, the phone goes on automaticly.
And goes in 3 colour mode.
And from there nothing works
Click to expand...
Click to collapse
cause you dont have a operating system so to say so its going to go into the bootloader. if you get to a bootloader than your phone is not "bricked" or broken, you just need to flash a rom onto it.
follow this guide exactly http://karhoe.net/guide-upgrading-htc-tornado-to-windows-mobile-6
i have read that many times, and tried over and over again.
But it wont flash, no matter what i try.
i give up
You should flash with factory wm5 original rom.
Can you please tell me where to get that?
Simple, just google for SPV C600 WM5 AKU2 ROM
http://www.google.com.my/search?q=S...s=org.mozilla:en-US:official&client=firefox-a
http://www.orange.co.uk/business/download/c600_aku2/c600_email.exe
Try this
http://www.orange.co.uk/business/download/c600_aku2/c600_email.exe
Try this
Simple, just google for SPV C600 WM5 AKU2 ROM
http://www.google.com.my/search?q=S...s=org.mozilla:en-US:official&client=firefox-a
Double Posting
Talk about double posting
Can you tell exactly what procedure you are following so that we can troubleshoot?
I have try to flash the unofficial rom. However, the phone rebooted during the update process. Now, my Acer s200 only can display the splash screen and cannot go into windows...
Anyways can flash the rom again?? I tried to use Acer_EUU.exe, but it need to detect the phone by Activesync. Anyways can flash the rom bypass activesync?
Some problem....
Hi!
I tried to flash from original EN ROM version on RU version and had the same problem - the device displayed Windows splash screen and then just reboot. So, I was confused but I didn't stop this process and after half an hour Windows loaded...(during this time I removed he battery and pushed soft-reset button a lotof times).
So, my only advice is to try to wait with re-booting device till the Windows boot and then to flash the original ROM (if you'll find it).
For me - after I loaded RU version of Windows I just flashed for custom EN ROM and it was OK (without this issue).
Good Luck!
It solves your problem..
DimICE said:
Hacked ACER_EUU.exe
Link: http://www.mediafire.com/?wy2yynnjz2z
ActiveSync connection is not needed!
Also is not needed to edit version.txt..
Just replace original ACER_EUU.exe with this file, execute it. Press next,next,ok,ok.. Message "Waiting for download mode coming" appear..
Power your Acer s200 with Power+Camera buttons pressed and connect to computer.
Tested on 2 acer s200 phones
Sorry for my English)))
Click to expand...
Click to collapse
link not working ( http://www.mediafire.com/?wy2yynnjz2z )
http://dimice.ru/ACER_EUU.exe
Rom update can be computer's fault
DimIce's program works perfectly. I've thought I bricked my phone many times, but always have been able to recover. This is what I recently discovered. In the middle of a flash, my computer said "write error". 'Thought my phone would stay dead. Finally, I switched to another computer and flashed the phone with no problem. So if you suffer a bad flash, simply change computers. If none is available, reboot your computer to clear the memory, etc. (by the way I'm using Windows 7 x64) and try again - sometimes even changing the USB port might help. The phone excels in it's ability to be re-flashed -even if you suffer disaster in the middle of a procedure.
As we dedicate only to HTC devices you won´t get too much attention.
Better try here:
http://www.eten-users.eu/
Good luck,
orb3000 said:
As we dedicate only to HTC devices you won´t get too much attention.
Better try here:
http://www.eten-users.eu/
Good luck,
Click to expand...
Click to collapse
Ignore this guy he has a bot setup for posting this on everyone that has 1 post or is posting in general or Upgrading, Modifying and Unlocking, You need to flash a rom based of the 1.00 oem drivers, flash this rom: http://forum.xda-developers.com/showthread.php?t=596304 and all of your problems will be solved, if not let me know and il help you out.
rafyvitto said:
Ignore this guy he has a bot setup for posting this on everyone that has 1 post or is posting in general or Upgrading, Modifying and Unlocking, You need to flash a rom based of the 1.00 oem drivers, flash this rom: http://forum.xda-developers.com/showthread.php?t=596304 and all of your problems will be solved, if not let me know and il help you out.
Click to expand...
Click to collapse
If you have any problem please take it to the council.
my only intention is to let new members know that this is an HTC forum only!
So they don't waste their time
If that bothers you, shame...
XDA has never meant to be HTC only.
Just open your eyes, dear sir.
I have a problem with the installation romu message pops up to me(sorry acer usb host driver must be installed in windows xp sp2 or later version please update os version to windows sp2)
stuck on clean boot screen
Hi, i was updating from EUU_Acer_S200_3.003b.00_EN_03.03.08_3.003.01_20100119 to EUU_Acer_S200_3.003c.00_ES_03.03.08_3.003c.00_20100201 but accidentally closed the acer's application, so the phone is stuck on "clean boot" screen? what should i do?, thank you!
Hello all,
i whas following this guide http://forum.xda-developers.com/showthread.php?t=625200 and evrything whas oke till step 3 where i need to get bootloader mode .
its seems to be gone :s nothing works camera+reset, all the tips and tricks doesnt work for me ,my phone just starts up and hangs at smart mobility.
no more bootloader mode.
any way of flashing from the sd whitout bootloader?
thx in advance
Fuggy said:
Hello all,
i whas following this guide http://forum.xda-developers.com/showthread.php?t=625200 and evrything whas oke till step 3 where i need to get bootloader mode .
its seems to be gone :s nothing works camera+reset, all the tips and tricks doesnt work for me ,my phone just starts up and hangs at smart mobility.
no more bootloader mode.
any way of flashing from the sd whitout bootloader?
thx in advance
Click to expand...
Click to collapse
out and replace the battery your phone, then take it to go to 3 color boot mode and can reFlash Rom again !!! if still can't you'd better sell it to me (with the proper price) Hi hihiiii
Hello
Could anybody help me with the orginal firmware for Sensation.
I have upgrade it to ARHD ICS 4 - 6.5.4 but now the speakers incall is broken and i need to return it in, and I know what there are saying, you have rooted you phone no garanties. .
So i need the orginale firmware for a Danish/europe phone normal sensation.
And also the radio for it.
Could anybody help me?
Regards Kenneth Dalbjerg
If your phone was unbranded then this RUU will do the job:
https://www.yousendit.com/download/M3BsUXVnUzhTSUJ2TzhUQw
Thanks. My phone was unbranded.
Hello
When i run the programs, it fail, right away when it trying to restore my phone.
It says it reboot it to bootloader, but that dosen't happent.
So i think it can't boot my phone to the bootloader.
Manually boot the phone into fastboot, connect to your PC and run it again
I have try that, but then the program wont find my phone
Should i be in recovery mode? or just fastboot?
Sorry think i wasen't in fastboot mode, just Hboot, or what the first screen name is , when i push fastboot, and try again, it found my phone, and start working.
Hello
Thanks for you help. My phone is now back to the normal rom again.
Regards Kenneth Dalbjerg