Just curious... I have revolution hd 3.1.0 with faux 0.1.2, but its randomly restarting for me. Is this because of the ROM? And if it is, and if I flash with cm7 rom do I have to remove faux kernel 0.1.2?
Sent from my HTC Sensation 4G using xda premium
When you flash CM7 it should replace the faux kernel with the CM7 kernel. CM recommends sticking with their kernel for the CM7 rom as well.
Thanks, the cm7 thread is developing and someone just pointed it out.
Exciting day... I hope cm7 will kick butt..
Sent from my HTC Sensation 4G using xda premium
I downloaded and flashed it the minute Kmobs announced it and provided the DL link.... and it's amazing!
sn0warmy said:
I downloaded and flashed it the minute Kmobs announced it and provided the DL link.... and it's amazing!
Click to expand...
Click to collapse
I'm getting bad download speeds with cm7 alpha are you? I normally get 9mbps down on beast rom but with the cm7 alpha I'm only getting 2mbps
truvu17 said:
Just curious... I have revolution hd 3.1.0 with faux 0.1.2, but its randomly restarting for me. Is this because of the ROM? And if it is, and if I flash with cm7 rom do I have to remove faux kernel 0.1.2?
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Which version of 0.1.2? If you opted for the higher clock speed version, your phone may just not be able to handle it.
If you flash CM7, it will replace the faux kernel with CM7's.
But if you flash CM7 I would recommend Faux's kernel for that as well. It's smokin' fast! I didn't have any shutdowns on the 1.78GHz, but I still went back down to the middle speed (1.67GHz iirc) just to prevent a lockup when the system is really stressed. Who knows, CM might have a better kernel than Faux after it's all said and done, but it's fun to play with as it all develops
Related
I just installed the [Kernel]CM7 [2.6.32.45] on my phone with CM7 already installed. when I turned on the device after the LG logo my screen turns black?!! What coulfd be the issue...I apologize if i come off as a idiot....
You installed what kernel???
From who?
From where?
Cm7 rom has a stock kernel, so you must have flashed a custom kernel, did you check to see if it was compatible with cm7??
Yes its this kernel [Kernel]CM7 [2.6.32.45]. I downloaded from XDA and it says its compatible with CM7. When i rebooted the G2x from CWM the LG logo showed up and then went to a black screen
Just enable USB connection and put a different kernel on ur phone and flash it. Ur phone obviously can't handle the kernel
Sent from my LG-P999 using XDA App
Also this happened to me when flashing an underclocked kernel from cm7. But then i flashed a different version of it and its now working perfectly i get mad battery.life.
Sent from my LG-P999 using XDA App
noobletsausecakebbq said:
Also this happened to me when flashing an underclocked kernel from cm7. But then i flashed a different version of it and its now working perfectly i get mad battery.life.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Which CM7 Kernels could the G2x handle fo.....Im new to the whole kernel thing & im tryna get some help & I want to get more power from my phone.
Each kernel is different for speed, battery life, experimental... so on and so on. Every chipset is different in our phones some can't handle certain kernels.
Sent from my LG-P999 using XDA Premium App
So what kernels would work on any G2x?? Thanks for the tip idk all our chip sets are different.
Sent from my LG-P999 using XDA App
Personally om using latest faux's kernel, I'm on latest nightly - cm7
http://forum.xda-developers.com/showthread.php?p=13678237
Don't forget to wipe cache, wipe dalvik cache, then flash kernel, then run fix permission, reboot, enjoy
Sent from my LG-P999 using xda premium
Sounds they are referring to Faux's Kernel...
You have to match them up properly as CM7 just went through a few kernel changes and the Custom Kernel developers have to make them compatible. I think Faux has .44 out which is supposed to work...
Then you also have 4 options from Faux: Pre-OC/UV or Stock Speeds; and CM and DS battery drivers.
player911 said:
Sounds they are referring to Faux's Kernel...
You have to match them up properly as CM7 just went through a few kernel changes and the Custom Kernel developers have to make them compatible. I think Faux has .44 out which is supposed to work...
Then you also have 4 options from Faux: Pre-OC/UV or Stock Speeds; and CM and DS battery drivers.
Click to expand...
Click to collapse
Thanks yall u helped out alot.............I just installed the WEAPON ROM with the FAUX Kernel & im using Pimp my CPU for OC & UC........Besides Faux what kernels would be good to use on all G2x phones?
I know some1 has to have a stable kernel for weapon 3.0 send link for download please
Are you having an issue with the stock Kernel? Just wondering.
Not really its just to slow and I can't boost up the CPU on stock kernel
Yea I'm having the same problem its too slow n laggy
Sent from my LG-P999 using xda premium
I used to use dragon but I had to many problems with it. I know there's gotta be a better 1
there isnt they all take like 3-4 minutes for every boot
http://forum.xda-developers.com/showthread.php?t=1102720
I use the UV kernel, but it takes a while to boot up.
Try faux 123's 013 kernel, oc and super stable
Sent from the fastest g2x in the world
Can you post a link for that one please?
Sent from my LG-P999 using xda premium
Yeah post a link for the download
Use the Faux 123 kernel & use Pimp My Cpu for the OC/UC....At 1.4 GHz OC i have gotten a 4105 score using Quadrant Advanced(Your results may vary)
Just google kernels g2x, you will find more than u need. I won't give up my combination, but oc'ed at 1.4g, it pulled a 6796 on antutu benchmark, just look at my avatar .
Sent from the fastest g2x in the world
I've gotten a 6798 on antutu usings fauxs oc/uv kernel at 1.5, but the phone does take alot longer to boot up.
Sent from my LG-P999 using xda premium
Fix coming for those long bootups
Here is a good theme made just for Weapon 3.0, I am currently using it and love it.
http://forum.xda-developers.com/showthread.php?t=1314526
nismokidz32 said:
Yeah post a link for the download
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1102720
http://www.multiupload.com/KFCY74Q85M
http://www.multiupload.com/DVO5CXS92I
I am running the new Weapon G2X 3.0 RC On a Wind Mobile LG-P999DW I was wondering which kernels are compatible with the device/rom. I too am looking for the ability to OC my processor.
So I got the faux 123 .0.1.3 running on weapon g2x 3.0 rc1 got a 6707 benchmark winning!!
Sent from my LG-P999 using XDA App
Some data would be nice on this issue.
Thanks
I am using the latest Trigger rom.
From all the rom's I tried, i think its the best!
Sent from my LG-P999 /trigger rom using Tapatalk
I'm using Weapon 3 and faux kernel. Reliable. Put Weapon in yor survey list.
Read my signature
I'm running Bionix Realoded. Very fast rom btw
Sent from my G2x running Bionix Reloaded with Dragon-OTA 1.1 kernel
Recently switched to weapon 3 and I love it
Sent from my LG-P999 using xda premium
I'm on stock with root, bloat frozen.
Weapon and Bionix are missing from the poll.
I used CM7 Nightly for a while, i just flashed Bionix Reloaded a couple days ago with Dragon-G2x v1.1.1 and its super fast battery life is a little better then CM7 but i have not found out a way to port over themes but it offers alot of options to play around with
Didn't we have this thread yesterday?
You forgot to list Weapon. Most stable daily rom out there. Everything works. The rom has been abandoned, but it really does not matter. It is that good.
I'm using the eaglesblood kang version. Probably the best cm7 based ROM. Before this I was using weapon
Sent from my LG-P999 using XDA App
Weapon gave me random reboots and it was sort of buggy, so I stuck with EaglesBlood with Faux's 0.4.7 kernel. I feel as if EB is just the most stable rom for my phone at least.
MIUI all the way. From my experience the most stable and the best battery life. At least it is for me.
stormageddon said:
MIUI all the way. From my experience the most stable and the best battery life. At least it is for me.
Click to expand...
Click to collapse
Same, but I like it for its customizable interface without needing other launchers. It's themes are pretty sweet. When can mix and match themes it makes me happy.
Sent from my LG-P999 using xda premium
stock gb. Waiting for cm9
Sent from my T-Mobile G2X using XDA Premium App
Weapon 3.0 with Faux's GB kernel @1. 5 GHZ.
Sent from my G2X
jonathanUSC said:
I'm using the eaglesblood kang version. Probably the best cm7 based ROM.p
Click to expand...
Click to collapse
Same here.
Any Update for ICS on Thunderbolt? What is the fastest this phone can over clock to?
Any ROM and kernel combo ya guys recommend?
Helping a friend root and flash his Thunderbolt.
NO ICS WITH WORKING RIL (NO DATA!!!!)
I RECOMMEND INFECTED ETERNITY WITH JD KERNEL!!!!!!! (LAGFREE + VR @ 1.4!!!!!)
!!!!!
/endyell
Datfoooo said:
Any Update for ICS on Thunderbolt? What is the fastest this phone can over clock to?
Any ROM and kernel combo ya guys recommend?
Helping a friend root and flash his Thunderbolt.
Click to expand...
Click to collapse
The ThunderBolt probably won't see any fully working ICS ROMs until an official/leaked update is released with a working ICS RIL.
I'm patiently waiting for ICS on the thunderbolt. Until then, I'm really digging the express sense Rom
Sent from my ADR6400L using XDA
There's no word on an ICS update eta. Unable to figure our the ril for data on ICS, the developers are stuck until source is released. The fastest I've ever overclocked my bolt to is 1.9, but 1.9 runs unstable on most setups, and 1.2-1.4 is more reasonable and stable. Thunderstick full blown with imoseyon's most recent mr4 kernel flies, and can be overclocked to 1.9 and remain fluid, I don't recommend any OCing beyond 1.2-1.4 on TB though. Thundershed with imoseyon's most recent aosp kernel is really fast too.
Sent from my ADR6400L using Xparent Green Tapatalk 2
So i just installed cm9, and my phone can only go to 1188mhz so how do i over clock because i know the sensation can go to 1.6
Install system tuner and try to raise the value. If not, install a kernel compatible with cm9 and u should be good.
On some of the early nightlies I was able to use faux123's 005b3 asop kernel and overclocked to 1.78. I only used it on a couple of the early nightlies. I tried flashing it a few days ago and got bootloops. I think that was on nightly 01, maybe 30.
Stock kernel works fine for me. Overclock will probably be available sometime down the road. Someone on cm9 dev thread is running faux's kernel now, apparently without problems. I guess YMMV, or maybe that should be MMMV.
Isn't there a kernel less than 1.78 like 1.67 or something. A 1.6 kernel should be ok and u don't need to turn it up to max.
Oomike said:
Isn't there a kernel less than 1.78 like 1.67 or something. A 1.6 kernel should be ok and u don't need to turn it up to max.
Click to expand...
Click to collapse
For CM9, faux is the only one that maybe works as far as I know. There is a mod over in the dev forum that overclocks to 1.5, I think. Haven't tried it, so I can't verify.
cm9 was great, but it wasn't stable yet and couldn't be over clocked
so i tried aokp that wasn't as good the screen looked too small and spaced out, but yo ucould over clock. And unfortunately without me knowing my phone was backing up my apps, ON MY DATA, so i owe virgin about 200$ now =_= for using 70$
In the end i went back to arhd, do yo uguy have any recommendation.
Use faux kernel 005b3 it will over clock it to 1.728.and it is stable and will run great.I have been running it for 5 days no problem.
Sent from my HTC Sensation using XDA
im still a noob at the wholle android thing, so how do you flash a kernal?
anthonyly said:
im still a noob at the wholle android thing, so how do you flash a kernal?
Click to expand...
Click to collapse
First make double sure the kernel is compatible with your rom and operating system and firmware . Then wipe cash.and dalvik cash, then flash like a rom. By downloading the Kernel to the root of your SD card and flash through recovery. I like 4 ext recovery. After wiping you install from SD card then reboot. Hope this helps.
Of course do the download first, then wipe, then flash
Sent from my Sensation 4G using xda premium
DLittle2012 said:
Use faux kernel 005b3 it will over clock it to 1.728.and it is stable and will run great.I have been running it for 5 days no problem.
Sent from my HTC Sensation using XDA
Click to expand...
Click to collapse
How is your battery life
Sent from my Sensation 4G
how do i check if its compatible?
just flashed faux123 newest kernal for the sensation with cm9, the only problem is that when i try mounting it to the computer, it unmounts the sdcard