Hi there,
after flashing the [ROM] Team Tiamat Xoom Rom 2.1 Hammerhead the game Star Blitz is shown as "not compatible".
When flashing my Xoom back to the Motorola Original (Android 3.01) it works.
I've read some threads about the build.prop which content is relevant to the market whats shown. Does somebody know what is needed to trick the market and install this game with the 2.1 hammerhead rom?
Is there any other solution to get the game working? I searched the web for a direct download of the .apk without success.
Greetings,
André
Mine working fine
I got a euro MZ601 (3g). Can u send me your /system/build.prop to check if there are diffrences?
Thanks!
could you resolve this issue. because i have the same problem with the latest tiamat rom...
There is no issue to resolve via the developer. It's probably not working due to region settings.
this is an issue since with the stock rom its working.
the issue is acually discussed at google code:
code.google.com/p/tiamat-xoom-rom/issues/detail?id=21
Related
Hi Guys, I have rooted my Xoom, I need some help on overclocking.
How do I overclock, do I need a tiamat ROM / Kernel?
Please can someone give me steps on how to do this, searching high and low for a solution.
Thanks for your help
dhicks19 said:
Hi Guys, I have rooted my Xoom, I need some help on overclocking.
How do I overclock, do I need a tiamat ROM / Kernel?
Please can someone give me steps on how to do this, searching high and low for a solution.
Thanks for your help
Click to expand...
Click to collapse
You need to flash either the Tiamat or LaunchPad kernel.
Find their threads in the Xoom Dev forum and follow the very simple instructions.
I found this
http://forum.xda-developers.com/showthread.php?t=978013&highlight=TIAMAT
But it says must have android version 3.1 only. I have 3.0.1
Also does the taimat kernel have to be flashed using an sd card and does the recovery tool have to be flashed or can this be left out?
I found this http://www.android.net/forum/downloads.php?do=file&id=43 , will this work with uk xooms or is their a specific tiamat for US/UK versions
Thanks for your help
Ok so I need taimat version 1.4.1 as this is compatable with android 3.0.1.
Will the taimat 1.4.1 be ok with the 3g uk version?
So i need to install CWM by using adb to flash it to xoom -
http://forum.xda-developers.com/showthread.php?t=1074979
I can then get a microsd and put the taimat 1.4.1 kernel on there, and install it that way.
Is this right?
Thanks
I used the Euro 3g thread to bring mine up to 3.1, then flashed the new kernal, then pushed back over the files from step 4 of the Euro thread.
3g works but I dont have an SDCard...:/
Hello,
Firstly apologies if this thread is a duplicate - happy to close if it's somewhere else.
I'm new to rooting so any help would be appreciated...
Rooted my Desire a week ago.
CWM with CoolAces v7
Android: 2.3.3
Sense: 2.1
Baseband:32.48.00.32U_5.10.05.30
Kernel: 2_6_35_10-g3008ba26
S/W #: 2.36.405.8
My phone is initially one of the original UK Desires from Orange.
So I got the new rom on - had to add a fix to sort out 1 way audio if I made a call and now it's all working great...apart from some things in the Market.
Google Earth, Adobe Flash & BBC iPlayer have disappeared - if I use my PC's browser to go to [market.android.com] I see the apps but am unable to "push" them to my handset - get the error message "this application isn't compatible..."
A friend of mine did exactly the same upgrade to his Desire - but can see all the apps in the market (his was an O2 version of the Desire) so not sure if there's something funky with my Desire or not??
Update
Ok - so doing some research it would appear that there's some questions over the fingerprint that the market sees from the phone.
Anyone any ideas to how to update my Desire fingerprint with one that would work in the android market.
Alternatively any ideas how to bypass this??
Thanks,
Rob.
I have the same problem, not looked for Google Earth or iPlayer but I couldnt get Adobe Flash Player so its probably the same.
Also on an Orange Desire.
I found that on CoolAces v7 from the 9th of June worked allowed me to download Flash from the market but whenever I update to a newer update of the ROM although I have kept Flash installed I cant see it on the market anymore.
Perhaps something was changed after that date with the ROM that messed this up for Orange Desires.
Ste
Yep - that fixed it.
So I got a copy of the ROM that my mate put onto his Desire - flashed it onto mine and all the apps I was missing in the market are now back.
Thanks for the info.
Rob.
First silly question about this rom.
Can I load this onto a non-us xoom, or do I need to wait for lowtraxx to mod it?
TIA.
Audionut11 said:
First silly question about this rom.
Can I load this onto a non-us xoom, or do I need to wait for lowtraxx to mod it?
TIA.
Click to expand...
Click to collapse
Look in the Development section and you will see a thread for installing Tiamat 2.0 Manta Ray rom on non-US Xooms.
Cheers, done that already. Can 2.1.0 be I stalled over the top?
I use a German T-mobile Zoom.
The Update works fine for me.
I have yust Installed 2.0, later I updated to 2.01 and now
My Zoom is running with Tiamat 2.1.
For now without Problems.
Before you upgrade dont forget the backup, so you can came back if you dont like it.
Greetings Berjanjo
I finally managed to install CM7 on my ZTE V9C , which initially came shipped with stock 2.3.4 with operator customisations.( taiwan mobile mypad p2)
i forgot to make back up((((
no problems with 3G or GSM data, phone calls or SMS.
my tab has capacitive touch, which seems to work as good as it was.
few issues as of now though, and quite major ones:
1. bluetooth fails to turn on. shows error.
2. no wifi. error.
3. no auto rotation of screen at all.
can fixes be applied for these issues? or do I have to wait for another release?
please help with your suggestions.
thanks in advance.
Welcome to forums
Thread moved to Q&A due to it being a question. Would advise you to read forum rules and post in correct section.
stock rom
guys ,
My device is ZTE V9C.
can I change the cyanogenmode 7.1 to stock ROM using ODIN.
I already flashed my ROM with CM 7.1 by loading a zip file of
android 2.3 stock ROM through the clock work mod. But now my
tab is not booting. it stucks on CWM.
please help me. i am in trouble............
reghu912 said:
flashed my ROM with CM 7.1 by loading a zip file of
android 2.3 stock ROM
Click to expand...
Click to collapse
can you please explain what exactly you have done? flashed with CM7.1, ok I understand that. but what do you mean by "zip file of 2.3 stock"??
CM builds are as far from stock as it can be.
I've searched Google countless hours coming to dead link after dead link in attempt to find a working download for Android Revolutions HD 2.3.2. As far as I'm aware 2.3.2 is the last version that had the capability to overclock the CPU. I tried the later ICS version but found I didn't like the interface nor it's performance on the TF101 in comparison to 2.3.2
Anyone know where I can download 2.3.2? Mike1986 should keep all old roms available for download because unfortunately devices fail.
spydersus said:
I've searched Google countless hours coming to dead link after dead link in attempt to find a working download for Android Revolutions HD 2.3.2. As far as I'm aware 2.3.2 is the last version that had the capability to overclock the CPU. I tried the later ICS version but found I didn't like the interface nor it's performance on the TF101 in comparison to 2.3.2
Anyone know where I can download 2.3.2? Mike1986 should keep all old roms available for download because unfortunately devices fail.
Click to expand...
Click to collapse
If you have asked mike already and told you no I doubt anyone else has one... That's why you back up ROMs to the PC and as for keep backups of old files it takes a lot of space and he manages several devices... You can try looking on tablet forums if you haven't check already but that's a older rom ... Your bound to run into problems
Not being rude just saying
Samsung Galaxy S3
AOKP 4.2.2 by Task650
Ktoonz Kernel w/KingBeatz
ASUS TF101
A.R.H.D ICS 3.6
Harmony Kernel w/KingBeatz
If you want to overclock, use 3.5 or 3.6 and run a custom kernel like this:
http://forum.xda-developers.com/showthread.php?t=1693799
Or this:
http://forum.xda-developers.com/showthread.php?t=1565519
Step 1 Flash it in recovery
Step 2 wipe cache and Davlik
Step 3 Profit
I'll check if I have it on my tablet's microSD, I save all rom downloads... brb
EDIT: Sorry, the earliest version I have is 3.2.1, I recommend using a kernel as Fred suggested^^
Oops.. no delete button :\
Thanks
Thanks to those who replied. Your responses helped me to figure out what to do. I ended up spending much of the day catching up because I couldn't find the Harmony Kernel. I ended up getting aggravated and decided to use RaymondFX JellyBean AOSP 5.1.0 which includes the Harmony Kernel modded for JellyBean. Frederuco thanks for suggesting the Harmony Kernel, that actually got me on the right track to a suitable solution. The instigator of this whole mess, was I couldn't get a Bluetooth keyboard to function with 3.2.3. It'd connect but even after purchasing a high rated bluetooth app, I was unable to type a word with it. Then Google uploader or whatever it was quit functioning, I couldn't upload anything. I figured a reinstall of 3.2.3 would solve but finding it to download turned into a nightmare.