Related
Hi,
I want to know if there is any way to restore my tab to stock firmware? I can't find any links for GT-5113 ROM.
The reason to store the stock ROM is that I have installed CM9 on my tab and now I am unable to install Infected / Cleanrom. It hangs on Samsung boot screen after installing these roms via CWM.
Thanks.
sghi777 said:
Hi,
I want to know if there is any way to restore my tab to stock firmware? I can't find any links for GT-5113 ROM.
The reason to store the stock ROM is that I have installed CM9 on my tab and now I am unable to install Infected / Cleanrom. It hangs on Samsung boot screen after installing these roms via CWM.
Thanks.
Click to expand...
Click to collapse
As you realized AFTER the fact, creating a thread in development means you have something to offer to others,
not asking questions. FYI: I stopped using CM9 ROMs a long time ago because they frequently contain MANY
hidden bugs, only work properly when loaded with certain kernels, certain CWMs ... bottom line is you're
just one of the latest victims. Try a factory reset. Then ODIN the CWM in my Root thread. Then install
the ORIGINAL v1.0 CleanRom. It's the best of current custom ROMs and NO, we still don't have a stock GT-P5113.
Glenn
sghi777 said:
Hi,
I want to know if there is any way to restore my tab to stock firmware? I can't find any links for GT-5113 ROM.
The reason to store the stock ROM is that I have installed CM9 on my tab and now I am unable to install Infected / Cleanrom. It hangs on Samsung boot screen after installing these roms via CWM.
Thanks.
EDIT: posted in wrong section, MODS, please move this thread to Q/A.
Click to expand...
Click to collapse
We had the same situation, so hope this help.
I used odin to flash the gt-5110 stock Rom followed the guide in restore stock rom in galaxy tab 2 general section .After flashed my model gt-5113 became gt5110...lolz then i flashed the Clean Rom v1.1 then my model was back to Gt-5113..now I decide to stay at stock rom because Cm9 sucks...waiting for Aokp official.
If have any question pm me, I'll think i can help your tab 2 back to stock. [email protected]
Sent from my GT-I9000 using xda premium
Thanks, will try both the suggestions one by one.
The only problem with ODIN at the moment is that you can't reset the flash counter, I already have it at 3
Solved
Hi Glenn,
I was able to install CleanRom, by installing the CWM posted in your thread.
Thanks.
kettont said:
We had the same situation, so hope this help.
I used odin to flash the gt-5110 stock Rom followed the guide in restore stock rom in galaxy tab 2 general section .After flashed my model gt-5113 became gt5110...lolz then i flashed the Clean Rom v1.1 then my model was back to Gt-5113..now I decide to stay at stock rom because Cm9 sucks...waiting for Aokp official.
If have any question pm me, I'll think i can help your tab 2 back to stock. [email protected]
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
When you flashed the 5110 rom, did you have a problem with the language (Mine is currently in a foreign language)?
if so, when you flashed the Clean Rom did your tablet revert to the proper language?
Thanks
You can restore to stock using my guide. (link in signature) It should now be in English.
Hi guys,
This is my first post in xda...
I recently updated my p6200 to android 4.1.2 using odin and then rooted it. Now i want a custom rom (preferably cm10 or 10.1) so i have been searching for threads like this http://forum.xda-developers.com/showthread.php?t=1842090
But, the doenload link doesnt see to work..!!!
I know this is kinda stupid but after 3 days of searching for a single link this is my only option so a sincere request to the mods to please not delete this thread..
Also i have noval launcher as my stock and i deleted touchwiz launcher. Now i dont think that matters but just in case ( im a noob to android hacking )
theXerminator said:
Hi guys,
This is my first post in xda...
I recently updated my p6200 to android 4.1.2 using odin and then rooted it. Now i want a custom rom (preferably cm10 or 10.1) so i have been searching for threads like this http://forum.xda-developers.com/showthread.php?t=1842090
But, the doenload link doesnt see to work..!!!
I know this is kinda stupid but after 3 days of searching for a single link this is my only option so a sincere request to the mods to please not delete this thread..
Also i have noval launcher as my stock and i deleted touchwiz launcher. Now i dont think that matters but just in case ( im a noob to android hacking )
Click to expand...
Click to collapse
What are you trying to achieve? The stock based ROMs are much more stable than the CM ROMs. There's no need or use to delete things and if you delete too much you will start to cause problems.
DigitalMD said:
What are you trying to achieve? The stock based ROMs are much more stable than the CM ROMs. There's no need or use to delete things and if you delete too much you will start to cause problems.
Click to expand...
Click to collapse
I'm not trying to ACHIEVE anything.!!!! :angel:
I just want a custom ROM coz I don't like touchwiz and that is exactly the reason for me deleting touchwizhome.apk
Anyways I just added that info coz I thought that would affect the process of flashing custom Roms....
Can u pls find me a working link for cm10 or 10.1 or aokp which has been ported to p6200. I really want a custom ROM
Pls help
theXerminator said:
I'm not trying to ACHIEVE anything.!!!! :angel:
I just want a custom ROM coz I don't like touchwiz and that is exactly the reason for me deleting touchwizhome.apk
Anyways I just added that info coz I thought that would affect the process of flashing custom Roms....
Can u pls find me a working link for cm10 or 10.1 or aokp which has been ported to p6200. I really want a custom ROM
Pls help
Click to expand...
Click to collapse
I am not aware of any fully functional CM based or other custom ROMs for the P62xx series. The is a CM11 ROM that is a work in progress on the forum. I would install the latest stock 4.1.2 , root and then install a third party launcher , lock screen and other items to make it look the way I want. That will get you a stable, basically custom ROM. I think its unlikely that a stable CM11 will ever appear unless Samsung releases a stock 4.4 from which to build on and CM 10 is now outdated with no developers to support it.
Have you tried the development section.. There are alot of custom roms there.. PAC, Omni to name a few..
Try the Omni4.4.2 it is still in development but it works great and having KitKat on this Tablets is awesome
Guys pardon for my ignorance(im new to this upgrading/flashing thing) but how do you install custom roms?
I'm considering it an option because after i flashed my p6200 with the new jellybean rom via odin, my tablet works until it got battery drained and now stuck on "boot-loop", I've done the CWM wipe/reset data thing but still stuck in that loading screen, I also did try reflashing it with the same jelly bean firmware but still stuck.. I'm thinking installing a custom rom might make it work again..
or if you do have the old honeycomb stock rom for P6200 DXKL2 firmware that i could use via odin.
Try this
[GT-P6200] Official ICS 4.0.4 firmware (Nov 2012) [STOCK/UNROOTED]
or
[Official FIRMWARES] Galaxy Tab Plus P6200/P6210/SGH-T869]
or
[ROM][Stock] P6200XXLB1 [16.02.2012][Android 3.2]
or
Samsung Updates Latest Firmware - LIVE!
flash via Odin
kwakman said:
Try this
[GT-P6200] Official ICS 4.0.4 firmware (Nov 2012) [STOCK/UNROOTED]
or
[Official FIRMWARES] Galaxy Tab Plus P6200/P6210/SGH-T869]
or
[ROM][Stock] P6200XXLB1 [16.02.2012][Android 3.2]
or
Samsung Updates Latest Firmware - LIVE!
flash via Odin
Click to expand...
Click to collapse
Thanks man! but all links provided here are from "hotfile" which is now closed.. also for some weird reason I cant seem to download from Samobile.. any other suggestions guys?
try this man
http://forum.xda-developers.com/showthread.php?t=2410800
it looks like a fantastic rom based on its features . i also saw good feedbacks from other user's using it
i am currently downloading it right now so i cant give a feedback for now
give it a try
EzreaL. said:
try this man
http://forum.xda-developers.com/showthread.php?t=2410800
it looks like a fantastic rom based on its features . i also saw good feedbacks from other user's using it
i am currently downloading it right now so i cant give a feedback for now
give it a try
Click to expand...
Click to collapse
does it work for you?
I've downloaded this man.. copied it to my sdcard and then installed it through CWM recovery, now I get to the part where I had to choose stuff, like pre-installment settings like whether to choose "wipe user data" and such, and then install "samsung exclusive?" or "default install" or "remove bloatware", so there after choosing my options it then goes to this page with texts and the android robot at the background, it was so fast that I didn't even get to read what is written, i remember only "wipe?" or sort of, it goes for like a second and then restart back to the
"samsung galaxy tab 7.0 plus" loading screen, it's already been a while and it's still stuck in there, I wonder if that is normal, or again like any other stock rom i've flashed with using (odin method) this is stuck and going nowhere?
help! i wanted to post this at the development thread of this certain rom, but Im not allowed due to having few posts i guess?
and by the way, could someone share a ".pit" file for the p6200, i think it might be helpful for making this tab work again, thanks!
Aeolian1916 said:
does it work for you?
I've downloaded this man.. copied it to my sdcard and then installed it through CWM recovery, now I get to the part where I had to choose stuff, like pre-installment settings like whether to choose "wipe user data" and such, and then install "samsung exclusive?" or "default install" or "remove bloatware", so there after choosing my options it then goes to this page with texts and the android robot at the background, it was so fast that I didn't even get to read what is written, i remember only "wipe?" or sort of, it goes for like a second and then restart back to the
"samsung galaxy tab 7.0 plus" loading screen, it's already been a while and it's still stuck in there, I wonder if that is normal, or again like any other stock rom i've flashed with using (odin method) this is stuck and going nowhere?
help! i wanted to post this at the development thread of this certain rom, but Im not allowed due to having few posts i guess?
and by the way, could someone share a ".pit" file for the p6200, i think it might be helpful for making this tab work again, thanks!
Click to expand...
Click to collapse
sadly man we have same experienced on it. i am also stucked on the samsung logo.
finding a new rom again
EzreaL. said:
sadly man we have same experienced on it. i am also stucked on the samsung logo.
finding a new rom again
Click to expand...
Click to collapse
oh I see, let me know man if you could find something that might work, it's already been 2 weeks since I soft bricked this device..
Aeolian1916 said:
Thanks man! but all links provided here are from "hotfile" which is now closed.. also for some weird reason I cant seem to download from Samobile.. any other suggestions guys?
Click to expand...
Click to collapse
I can send to my dropbox any file If u want.
hi every body
a frnd of mine has samsung galaxy s2 GT -I9100 with
android 4.1.2
base band version I9100DDLS9
kernel version 3.0.31-1155691
build n.o- JZO54K.I9100XWLST
she wanted to upgrade to the latest android 4.4.2 kit kat but is completely unaware of the technicalities
as before asking this question to me i asked her to read through posts in the forum and he tried to understand the process
of flashing to get the 4.4.2 kitkat for galaxy s2 gt-i9100 but she still couldnt understand or get the process
well uptil now she has downloaded the following filesas she is unsure which is the better rom among the cyanogenmod and omni mod)
- odin v 3.09
- samsung kies and samsung usb drivers for mobile phones installed on pc and updated
- [ROM] Official CyanogenMod 11 Nightlies [4.4.2] [GT-I9100] 2014-02-13 (cm-11-20140213-NIGHTLY-i9100.zip direclty from cynogenmod website)
- [ROM][4.4.2][OFFICIAL]OMNI 12/2/2014
she asked me if there are any more files to download as i dont know the process with these mods my self so i kindly ask if any of the members or experts or developers can guide in this process as to what all she should download which all remaning files that upto the latest updates till date to be downloaded. and which among them is the better rom and how to proceed on the process to install the roms if cyanogen mod is selected and or if omni rom mod is selected
plz if any of the members or experts or developers can help or guide or sugesst on how to get the process done it would be really helpful to get your valuable insight into the matter
plz i eagerly await your reply and answer for my queries
thanz
timeprimw777 said:
hi every body
a frnd of mine has samsung galaxy s2 GT -I9100 with
android 4.1.2
base band version I9100DDLS9
kernel version 3.0.31-1155691
build n.o- JZO54K.I9100XWLST
she wanted to upgrade to the latest android 4.4.2 kit kat but is completely unaware of the technicalities
as before asking this question to me i asked her to read through posts in the forum and he tried to understand the process
of flashing to get the 4.4.2 kitkat for galaxy s2 gt-i9100 but she still couldnt understand or get the process
well uptil now she has downloaded the following filesas she is unsure which is the better rom among the cyanogenmod and omni mod)
- odin v 3.09
- samsung kies and samsung usb drivers for mobile phones installed on pc and updated
- [ROM] Official CyanogenMod 11 Nightlies [4.4.2] [GT-I9100] 2014-02-13 (cm-11-20140213-NIGHTLY-i9100.zip direclty from cynogenmod website)
- [ROM][4.4.2][OFFICIAL]OMNI 12/2/2014
she asked me if there are any more files to download as i dont know the process with these mods my self so i kindly ask if any of the members or experts or developers can guide in this process as to what all she should download which all remaning files that upto the latest updates till date to be downloaded. and which among them is the better rom and how to proceed on the process to install the roms if cyanogen mod is selected and or if omni rom mod is selected
plz if any of the members or experts or developers can help or guide or sugesst on how to get the process done it would be really helpful to get your valuable insight into the matter
plz i eagerly await your reply and answer for my queries
thanz
Click to expand...
Click to collapse
Here: http://forum.xda-developers.com/showthread.php?t=2630328
Given a guide to identical issue
Sent from my GT-I9300 using Tapatalk
thanks amirTor for replying again
jus wantd to know if the process is similar for the help u had given me for installing neat rom coz i ran into a lot of problems and m still facing problems of connectivity (wifi not connecting)and issues with the neat rom (superfast battery drainage) as i flashed it the 2nd time again (AOSP NeatRom v 2.8) using the guidance u had given me for my phone although ur hints for installing were spot on but i m having problems .
thats y i had to ask again i didnt want her to face the same problems as mine .
so if the process and the files are the same that is required then if u suggest i go ahead with the cyanogen mod or omni rom i will start installing it
awating ur response
thanks
timeprimw777 said:
thanks amirTor for replying again
jus wantd to know if the process is similar for the help u had given me for installing neat rom coz i ran into a lot of problems and m still facing problems of connectivity (wifi not connecting)and issues with the neat rom (superfast battery drainage) as i flashed it the 2nd time again (AOSP NeatRom v 2.8) using the guidance u had given me for my phone although ur hints for installing were spot on but i m having problems .
thats y i had to ask again i didnt want her to face the same problems as mine .
so if the process and the files are the same that is required then if u suggest i go ahead with the cyanogen mod or omni rom i will start installing it
awating ur response
thanks
Click to expand...
Click to collapse
Weird, you're the first I heard who has complains about Neatrom (did you try to install the lastest 6.8 version?)
Anyway, the process is the same for all custom roms, the only different is that philz recovery was updated from 6.7.9 to 6.14.5
Sent from my GT-I9300 using Tapatalk
amirTor said:
Weird, you're the first I heard who has complains about Neatrom (did you try to install the lastest 6.8 version?)
Anyway, the process is the same for all custom roms, the only different is that philz recovery was updated from 6.7.9 to 6.14.5
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
thanz amirTor for replying
i have tried with the philz 6.04.5 which u had suggested for me while in my inquiry for my phone.well shortly today i got frustrared and tried installing the neatrom v 5.7 for samsung galaxy s2 gt i9100 well it was a wooping big file almost 738 mb but that also installed as per ur instructions and read aurthor sale post on how to install but now the problem i am facing is after completely installing everything the first boot as per the neatrom v 5.7 aurthor should be around 10 min but for me it jus shows the neat rom animation screen again and again and the phone jus keeps getting hot from the back i cant seem to get into the main screen well looks like i m done for i guess
the steps i followed for the neat rom v 5.7 (4.1.2) instalation are
1-copied both the neat rom v 2.8(4.4.2) and v 5.7(4.1.2) zip files ,gapps (AIO_gapps.4.4.2.build.2.1), philz_touch_6.07.9-i9100,zip ,CWM-KitKatCompatible-i9100,zip files to the sd card
2- flashed odin v 3.09 with file PhilZ-cwm6-XWLSZ-OJC-5.15.9.tar,md5 and got philz recovery installed
3- then installed philz_touch_6.07.9-i9100,zip from sd card to update philz touch recovery to 6.04.5( it shows the 6.04.5 after updating)
4- the wiped system clean for new rom installation, wiped cache, wiped delvik cache form advanced settings, formatted /system &/preloads from mounts and storage
5- installed the neat rom v5.7 (4.1.2)and it installed everything
but at the first reboot it jus keeps flashing the neat rom circle animation and that it jus keeps flashing that again an again i waited for like 25 min on that screen and then felt the phone heaating up from the battery back side on my hand so i switched it off completely
i dont know wat steps i did wrong or did i miss something i kept reading through all the various post and cant seem to get a solution for it
is the philz touch recovery 6.15.4 compatible for the galaxy s2 gt i9100
plz if there any solution for the problem i m facing plz i need some advice
timeprimw777 said:
thanz amirTor for replying
i have tried with the philz 6.04.5 which u had suggested for me while in my inquiry for my phone.well shortly today i got frustrared and tried installing the neatrom v 5.7 for samsung galaxy s2 gt i9100 well it was a wooping big file almost 738 mb but that also installed as per ur instructions and read aurthor sale post on how to install but now the problem i am facing is after completely installing everything the first boot as per the neatrom v 5.7 aurthor should be around 10 min but for me it jus shows the neat rom animation screen again and again and the phone jus keeps getting hot from the back i cant seem to get into the main screen well looks like i m done for i guess
the steps i followed for the neat rom v 5.7 (4.1.2) instalation are
1-copied both the neat rom v 2.8(4.4.2) and v 5.7(4.1.2) zip files ,gapps (AIO_gapps.4.4.2.build.2.1), philz_touch_6.07.9-i9100,zip ,CWM-KitKatCompatible-i9100,zip files to the sd card
2- flashed odin v 3.09 with file PhilZ-cwm6-XWLSZ-OJC-5.15.9.tar,md5 and got philz recovery installed
3- then installed philz_touch_6.07.9-i9100,zip from sd card to update philz touch recovery to 6.04.5( it shows the 6.04.5 after updating)
4- the wiped system clean for new rom installation, wiped cache, wiped delvik cache form advanced settings, formatted /system &/preloads from mounts and storage
5- installed the neat rom v5.7 (4.1.2)and it installed everything
but at the first reboot it jus keeps flashing the neat rom circle animation and that it jus keeps flashing that again an again i waited for like 25 min on that screen and then felt the phone heaating up from the battery back side on my hand so i switched it off completely
i dont know wat steps i did wrong or did i miss something i kept reading through all the various post and cant seem to get a solution for it
is the philz touch recovery 6.15.4 compatible for the galaxy s2 gt i9100
plz if there any solution for the problem i m facing plz i need some advice
Click to expand...
Click to collapse
Flash the lastest 6.14.4 from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9100
and try again after wipe (you're doing anything as should).
Few questions:
Does Neatrom installation log mention any errors while installing?
Maybe you should try to disable neat's boot animation (possible as part of the aroma install)
Are you trying to install this version: http://goo.gl/qRDYgf ?
If still no go, describe your actions at aroma installer, or try asking at rom's thread, perhaps they'll better aswers.
BTW- does kitkat version work as should?
Sent from my GT-I9300 using Tapatalk
Q&A for [ROM][4.4.4][UNOFFICIAL][M11]Cyanogenmod 11.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Daily driver material?
Hi!
Just wondering..is this rom good enough for daily use? Is it better than stock 4.1.2 (4.2.2 is terrible btw) because i do bot know whether to flash this or not. Also, can you flash it using cwm as I dont really like the TWRP ui
FluffyGrwyfoo said:
Hi!
Just wondering..is this rom good enough for daily use? Is it better than stock 4.1.2 (4.2.2 is terrible btw) because i do bot know whether to flash this or not. Also, can you flash it using cwm as I dont really like the TWRP ui
Click to expand...
Click to collapse
I think it's stable enough for daily use. I use it for many days without any restart or any problem.
You have to update to 4.2.2 first (It won't work on 4.1.x bootloader)
You must know to backup whatever data you don't want to loose cause a full wipe is needed.
Read the first post for warnings, bugs etc. The main bug is bluetooth headset (if you own one).
And yes, you can install from CWM. Instructions on first post.
Also, read third post to keep it fast as long and as "hard" as you use it.
blurry icons
after updating to the latest build (M11) all the icons in the app tray look blurry and kid of blown up...like the resolution does not mach. have i done something wrong when flashing or is this a know issue?
With the latest M11 release, the Contacts app crashes at startup.
Hello, anybody else has problems when uploading video inside whatsapp conversations?
thaks
great rom
waiting llollipop CM
@eduardcazacu no , the funny part is that i tried every 4.4.4 rom and could't send video on whatsapp ( and wa+ ) i would always get this "whatsapp has stoped" but however on this last cm11 build is working , i can now again send videos per whatsapp
Sent from my GT-I9105P using XDA Premium 4 mobile app
help
my gt-i9105P's baseband is zcami1,I can't find any rom for this phone ,:cryinglease help me ...:crying:
Cyanogenmod 11 on grand i9082
Can I install Cyanogenmod on samsung galaxy grand i9082 without using any other recovery software
Can I enter in to samsung recovery mode and wipe the data and select install update from sd card option. Will that work or is it mandatory to install CWM or Philztouch etc before installing
Cause you got it for free
OrdinaryNoob
eduardcazacu said:
after updating to the latest build (M11) all the icons in the app tray look blurry and kid of blown up...like the resolution does not mach. have i done something wrong when flashing or is this a know issue?
Click to expand...
Click to collapse
I think @Bestaki23 should compile with 240dpi density.
@sujith88 no, for custom roms you need custom recovery ( CWM or Philztouch)
Sent from my GT-I9105P using XDA Premium 4 mobile app
How to get sources for CM11 for I9105P?
In "[ROM][4.4.4][UNOFFICIAL][M11]Cyanogenmod 11.0" the location of the device specific source code is given as https://github.com/SamsungBCM-Cyanog..._samsung_s2vep and https://github.com/SamsungBCM-Cyanog...ys2plus-common and https://github.com/SamsungBCM-Cyanog...ys2plus-common.
How can I set up a build environment for the I9105P? I already read (an understood) "Learning to build Cyanogenmod" and getting the CM11 sources with repo is no problem, the only problem remaining is how to specify the above mentioned two device specific sources. Can this be done with a local mainfest in the local_manifest directory? If yes, how does this have to look like and what steps are necessary to sync with these two repositories? Are additional steps specific to the I9105P necessary to start a build?
Vibration
So you said the rom is good for daily use... In the main thread I saw numerous comments about vibration being buggy and sometimes non functional. Is this true? The 4.4.2 cm11 by cooldevelopement has fully working vibration. So should I flash cm11 m11 (4.4.4) or 4.4.2? And in the m11 build, are there any other bugs apart from whats listed under "known issues"? Now Android lollipop is just round the corner I hope to have at least the second latest android version :/ 4.1.2 is starting to show it's age when it comes to app compatibility...
Set mobile data limit my phone crash
Hallo,
when I change the usage cycle in mobile data limit my phone crashes (CM 11 M11)
This do not happen with the Spirit 1.5 rom
By
FluffyGrwyfoo said:
So you said the rom is good for daily use... In the main thread I saw numerous comments about vibration being buggy and sometimes non functional. Is this true? The 4.4.2 cm11 by cooldevelopement has fully working vibration. So should I flash cm11 m11 (4.4.4) or 4.4.2? And in the m11 build, are there any other bugs apart from whats listed under "known issues"? Now Android lollipop is just round the corner I hope to have at least the second latest android version :/ 4.1.2 is starting to show it's age when it comes to app compatibility...
Click to expand...
Click to collapse
there is also official 4.2.2
N/A
safariking said:
there is also official 4.2.2
Click to expand...
Click to collapse
Hi, thanks for replying! I already know there is a 4.2.2 offical firmware for the s2 plus, thanks. I dont know about you, but when I updated it I experienced major lag issues, even after doing a factory reset, claering cache, reflashing, etc. Its overall a terrible update from the almost bug free 4.1.2. However, 4.1.2 is soon 3 versions behind and I was looking into flashing one of these awesome looking ROMs that are running 4.4. (Just love how AOSP looks :3) However, I dont really know which ROM i should flash
I think I have decided to flash a cm rom, anyways, but which version should I flash? I used cooldevelopement's cm11 4.4.2 rom in the past, which seems mostly bug free. However I switched back to stock 4.1.2 due to the old youtube app versions having the pixelated vid that the 4.2.2 stock rom used to suffer from. Is this 4.4.4 cm Better or worse than the older 4.4.2 cm I installed before? Thanks in advance sorry for a long message
xmattjus said:
Hi, after the upgrade from M10 to M11, when the battery goes under the 15% of charge com.android.system.UI FCs and I can't do anything but remove the battery from the device to shut it down. Anyone has this problem?
Click to expand...
Click to collapse
hi, i have this issue too.
Any ideas on how to solve it?
Do i have to submit a bug ?
i flashed the rom on stock rom 4.1.2 and now it just stops at the boot screen(Samsung GT-I9105 screen). What can i do to fix this :/ ?
Can somebody please suggest on what's the best ROM available. My Tab is 3G and Wifi.
Thank you.
J
Daniel`s Carbon Rom 4.4.4 is for me the most stable. Although the latest CM12.1 I just installed seems awesome.
Oups, sorry I did not read the title.
To install the best available ROM, you need to install TWRP 2.8.3.1 - p6800 as described in Android Development subforum
Guys, I need some FAQ pn my P6800. I did install some custom ROMs - now have CM12.1 from Daniel. For some reason all of custom roms were (and are) really unstable (frequent reboots, long lasting lags). Compared to stock icecream sandwitch all of them were worse I read some feedbacks and assume that it is my specific issue. So I would like to doublecheck if I do everything right. I have one latest TW recovery, wipe everything and just install the rom from zip. There is no need to flash a dedicated file for kernel (like they have it in sony devices), or something like that, correct?