Related
Is there any step by step tutorial to get my htc magic rooted
I can only find posts where they say it is like on windows but without installing files but i have no idea how to enter that prompts on terminal
it would be much appreciated any help. I know i am not the only one interested
cesardeluxe said:
Is there any step by step tutorial to get my htc magic rooted
I can only find posts where they say it is like on windows but without installing files but i have no idea how to enter that prompts on terminal
it would be much appreciated any help. I know i am not the only one interested
Click to expand...
Click to collapse
The commands are the same. Just like Linux users can follow Windows directions but with some substitutions.
Download the SDK here: http://developer.android.com/sdk/1.5_r3/index.html
Follow the instructions here: http://developer.android.com/sdk/1.5_r3/installing.html
Once you have the SDK setup, you can follow the steps given in the rooting threads/wiki. Any time it says to enter a command you do it in your terminal (which on OSX i think is Terminal.app, use Spotlight to find it).
Hope this helps a bit.
i dont get this:
Code:
On a Mac, look in your home directory for .bash_profile and proceed as for Linux. You can create the .bash_profile if you haven't already set one up on your machine
i don't have that .bash_profile how do i create it?
thanks
Google easy to use and always there for you.
Clinton
yeah but all tutorials are made for xp or even linux.
I have tried to create it using vi command then edited with the path o the sdk tools
but when i type adb it doesn't do anything
i am stuck there
Did you check my link for your bash_profile ? This help at all?
Clinton
cesardeluxe said:
yeah but all tutorials are made for xp or even linux.
I have tried to create it using vi command then edited with the path o the sdk tools
but when i type adb it doesn't do anything
i am stuck there
Click to expand...
Click to collapse
Try reading this:
http://www.tech-recipes.com/rx/2621/os_x_change_path_environment_variable/
Sounds like the Path variable may be in a different file. It is the same on linux, I think it can be in a few places.
Irf you want to use adb without messing with your path you can do the following:
Code:
cd <android-sdk-location>/tools
./adb devices
This is convoluted so get that PATH working and everything should be nice and easy! Good luck.
I use a Mac, and when I was getting started I used the linux tutorials with no problem.
i can push the 2 files using commands to my sd. Adb devices shows my htc ok
but after i enter to fastboot mode the device is no longe shown
i type
Code:
./fastboot boot recovery-new.img
but the only thing i get is
Code:
-bash: fastboot: command not found
i am on tools directory on terminal
i think fastboot is not in the tools directory ...
i'd rather say the error is caused by that then a missing connection.
Does the phone write "FASTBOOT USB" ?
if you type "ls", can you find a file named fastboot in your directory?
cesardeluxe said:
i can push the 2 files using commands to my sd. Adb devices shows my htc ok
but after i enter to fastboot mode the device is no longe shown
i type
Code:
./fastboot boot recovery-new.img
but the only thing i get is
Code:
-bash: fastboot: command not found
i am on tools directory on terminal
Click to expand...
Click to collapse
The files have to be executable. You can do that by running:
Code:
chmod -R +x /path/to/tools
This makes all the files in the tools directory executable with ./
About the .bashrc or .bash_profile if you don't have one in your home directory you can safely make one. With the following command:
Code:
echo "export PATH=$PATH:/path/to/tools/" > ~/.bashrc
or if the file exists just do:
Code:
echo "export PATH=$PATH:/path/to/tools/" >> ~/.bashrc
Remember to restart the shell after you are done with this.
the reason adb work for you is because adb is in tools directory
fastboot does not. You have to get fastboot somewhere else
Whenever you get command not found, you can run another command to check
ls <program you ran>, and see what happened
Example
in your tools directory, where you have no problem running adb push, try doing "ls adb", without the quote
in your tools directory, where you have problem running fastboot, try doing "ls fastboot", without the quote
and you should see what's going on
BTW, this is fairly basic unix environment. If you are having trouble at this stage, you need to get yourself more familiar with unix environment, which is what osx is based on
I am sorry, but i don't really know where's good tutorial on unix
On google, i just search for "mac osx unix shell tutorial:, and come across this site
http://www.osxfaq.com/tutorials/LearningCenter/
Hope this help
Edit 1: btw, here's where you can find fastboot for MAC. Put it in your tools directory. IF you keep the filename as is, you need to type fastboot-mac whenever you see someone mention fastboot
http://www.htc.com/www/support/android/adp.html
yeah you're right fastboot is not on that tools directory. in fact i have looked into the whole sdk folder and i can't find it.
thanks
hey i managed to apply the update thanks to having fastboot-mac on tools folder
but after booting i go to terminal to apply the final step and i get this
Code:
MBdeluxe:tools cesarleon$ ./adb shell flash_image recovery /sdcard/recovery-new.img
error reading /sdcard/recovery-new.img header: Is a directory
what's wrong ?
thank you people
cesardeluxe said:
hey i managed to apply the update thanks to having fastboot-mac on tools folder
but after booting i go to terminal to apply the final step and i get this
Code:
MBdeluxe:tools cesarleon$ ./adb shell flash_image recovery /sdcard/recovery-new.img
error reading /sdcard/recovery-new.img header: Is a directory
what's wrong ?
thank you people
Click to expand...
Click to collapse
Are u sure that recovery.img got transferred properly? Maybe check the rights on it (it not read only or something). What if you mount the sdcard in OS X and copy and paste (vs push)?
If you're trying to flash the recovery image, try
Code:
adb shell mount -a
adb push recovery-new.img /system/recovery.img
adb push recovery-new.img /sdcard/recovery-new.img
adb flash_image recovery /sdcard/recovery-new.img
Hope that helps
adb shell mount -a
Click to expand...
Click to collapse
didn´t work i think the parameter a is not correct
well this is almost the last step! thank you all for your explanations
cesardeluxe said:
hey i managed to apply the update thanks to having fastboot-mac on tools folder
but after booting i go to terminal to apply the final step and i get this
Code:
MBdeluxe:tools cesarleon$ ./adb shell flash_image recovery /sdcard/recovery-new.img
error reading /sdcard/recovery-new.img header: Is a directory
what's wrong ?
thank you people
Click to expand...
Click to collapse
Very odd error message
Do this to check what your phone's sdcard looks like
Code:
adb shell ls -l /sdcard/recovery-new.img
Next, you should grab the file from your phone to your computer. This step assume you are in your tools directory
Code:
adb pull /sdcard/recovery-new.img recovery-new-phone.img
Finally, try to compare the file you have on your computer against the one you got from your phone, and see if they are the same. This assume you have your working recovery-new.img in tools directory
Code:
diff recovery-new.img recovery-new-phone.img
I have not try this diff command, and I assume it'l handle binary diff
If diff can not handle binary file, do ls and check file size. both file should match
Code:
ls -l recovery-new.img recovery-new-phone.img
If your computer and phone recovery-new.img are not the same, download to phone again
cesardeluxe said:
didn´t work i think the parameter a is not correct
well this is almost the last step! thank you all for your explanations
Click to expand...
Click to collapse
You will get Failed Mounts when u run
Code:
adb shell mount -a
You CAN ignore them.
See here: http://forum.xda-developers.com/showthread.php?p=4029461
This may not be the right way to do it but I always just downloaded the recovery to the tools directory of the android sdk. Then fire up the phone in fastboot mode and do:
./fastboot flash recovery recovery-new.img
(replacing recovery-new.img with the name of the downloaded img file.)
I'm sure there is a reason people are doing it the other way, but for myself one command to do the flash is alot easier!
Ok everyone. First off do not update your phone if Sprint offers an upate. I don't think they are going to but if they do anytime soon and you update this exploit could likely be fixed. When updates are released the devs will make updates that keep root so do not update!
That said, this is a very newbie guide. This is meant for Windows but I will post instructions for linux as well (Ubuntu). I just need to warn you that I can't adb into my phone from Ubuntu so I have to do it through Windows. Don't know why it doesnt work but it doesnt. Mac users you can always (assuming you can get it to work in Ubuntu) download a live cd and boot into Ubuntu to try this. I don't have a mac (nor do I want one) so I can't give instructions (though I assume they should be relatively the same).
Step 1:
First you need to download the Android SDK. It may soumd confusing but it's not. There are tools in here that we need. You can get it from http://developer.android.com/sdk/index.html. This is a modular SDK and all the tools we need are in this download. Once downloaded you just need to extract it in a directory of choice.
The next thing we download is asroot2. This is a script that was developed that runs an exploit in Android's linux that allows us to run root. The link for that is here: http://forum.xda-developers.com/attachment.php?attachmentid=244212&d=1257621154. Unzip that file and place it in a directory of your choice. Also download http://www.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=recovery-RA-heroc-v1.2.3.img and place that into the same directory you extracted asroot2.
Step 2:
Connect the phone to the USB port.
Ubuntu is easy for this (again assuming it works for you). Simply open a terminal and cd into the directory that you extracted the sdk into. Then cd into the tools directory. Then run the following commands:
sudo ./adb push /directory_you_placed_asroot2/asroot2 /data/local/
sudo ./adb shell chmod 0755 /data/local/asroot2
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
If all goes well you should be presented with a new prompt. This is the linux terminal built into Android. This will allow us to execute all the commands we need to execute because the asroot2 script gave us root access.
In Windows it is a little more difficult. You have to first install the driver for the phone. When Windows asks you for the drivers direct Windows to the directory you extracted the SDK into. You should see a folder called usb_driver. If you are running the 32 bit version of Windows select the x86 folder. If you are using a 64 bit version then select the x64 folder. Then select the android_usb.inf file. This should install the drivers.
If running XP or lower you will need to go to the start menu and click run, then you enter cmd and press enter. If Vista or higher you will press the start button and type cmd and press enter. When you are at the command prompt you cd to the directory you extracted the sdk into. Then cd into the tools directory. Then execute the following commands:
adb push /directory_you_placed_asroot2/asroot2 /data/local/
adb shell
chmod 0755 /data/local/asroot2
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
Now your phone is officially rooted! We arent done yet though. Now you need to flash the recovery image. If you are still in adb shell type in exit until you are out. You should be in the directory where you extracted the recovery image. If not go there. Type in the following:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
Once that is done, type in adb shell (or sudo ./adb shell in ubuntu). If your command prompt is a dollar sign then type in su and press enter. If it is a pound sign you are good. Then type in the following:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
Once that is finished you are done. To reboot into recovery type in adb shell reboot recovery. You should reboot into recovery mode. Right now there is not a lot you can do but once we have some devs who make some roms then we will be well on our way to an even more awesome phone. Any questions please ask away. Also, I am sorry if this tutorial is hard to understand or badly laid out. My daughter is crawling all over me so it's hard to type or think. Good luck all and thanks to everyone who rooted this phone and made the recovery and did such a great job!
chuckhriczko said:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
Click to expand...
Click to collapse
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?
You beat me to it!!!! I was planning on laying out the steps to make sure I had my head on straight.
To continue with your guide: (The following are questions, not procedures)
1. We run a Nandroid back up to lock in our stock ROM so if we ever do something stupid, aka brick the phone, we can push this back on?
2. What comes on the SD card? Is it needing to be backed up when I go to a 16GB class 6 card?
3. Insert the new SDcard and use the ext2/swap/fat32 script
4. convert ext2 to ext3, (now ready for apps2SD?)
Anything else you can add would be nice.
Again thanks for the steps! They are clear for me.
rockcrawler said:
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?
Click to expand...
Click to collapse
Sounds like you need to add the directory where you have adb to be added to he path. is your adb in the same dir as the image?
rockcrawler said:
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?
Click to expand...
Click to collapse
You may currently be in adb shell already. If you are showing the pound sign this is likely. The command is supposed to be run outside of adb shell. Try the command below:
flash_image recovery recovery-RA-heroc-v1.2.3.img
Treefallingquietly said:
Sounds like you need to add the directory where you have adb to be added to he path. is your adb in the same dir as the image?
Click to expand...
Click to collapse
I apologize, but that went right over my head.
I have used this command to copy the image to the sd card.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
I got this output:
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1640 KB/s (3352576 bytes in 1.996s)
I then do the following with the noted result:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell
$ su
su
# adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb: not found
Any help as to where I making my mistake would be greatly appreciated.
Treefallingquietly said:
You beat me to it!!!! I was planning on laying out the steps to make sure I had my head on straight.
To continue with your guide: (The following are questions, not procedures)
1. We run a Nandroid back up to lock in our stock ROM so if we ever do something stupid, aka brick the phone, we can push this back on?
Click to expand...
Click to collapse
Yes. A nandroid backup completely backs up every piece of information on your phone. It is a complete image of your phone and if it needs to be restored for whatever reason you just load up recovery and can restore it the way it was before.
Treefallingquietly said:
2. What comes on the SD card? Is it needing to be backed up when I go to a 16GB class 6 card?
Click to expand...
Click to collapse
What do you mean exactly? The only thing that gets copied to an sd card is the nandroid backup so yes, when switching to an sd card just do another backup. Or you can also copy the nandroid folder from your existing sd card to your new one.
Treefallingquietly said:
3. Insert the new SDcard and use the ext2/swap/fat32 script
4. convert ext2 to ext3, (now ready for apps2SD?)
Click to expand...
Click to collapse
Yes and no. Just run the ext2/swap/fat32 script and it should be ready for apps2sd. You can convert to ext3 if you want. Generally on normal hard drives ext3 is faster, however there has been some controversy with that on android phones. As for converting to apps2sd, right now the best way is probably the manual method which I can write up a tutorial on as well. The dream forum has some good tutorials on it as they were the first to do it. I actually need to go back and re read some of those because it's been so long since I did it. I tried the apps2sd apk but that didnt seem to work for me.
rockcrawler said:
I apologize, but that went right over my head.
I have used this command to copy the image to the sd card.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
I got this output:
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1640 KB/s (3352576 bytes in 1.996s)
I then do the following with the noted result:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell
$ su
su
# adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb: not found
Any help as to where I making my mistake would be greatly appreciated.
Click to expand...
Click to collapse
Yeah. The problem is that you are trying to adb shell twice. After you adb push then just run the command adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img. That should work.
chuckhriczko said:
You may currently be in adb shell already. If you are showing the pound sign this is likely. The command is supposed to be run outside of adb shell. Try the command below:
flash_image recovery recovery-RA-heroc-v1.2.3.img
Click to expand...
Click to collapse
Now I get the Following:
Code:
# flash_image recovery recovery-RA-heroc-v1.2.3.img
flash_image recovery recovery-RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
#
And this outside adb shell, in the same directory where I did the push:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell flash_image recovery recovery-
RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
Ideas?
rockcrawler said:
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?
Click to expand...
Click to collapse
yes he left out the /sdcard/in the path and if you are in teh shell you don't need the adb portion of the command.
rockcrawler said:
Now I get the Following:
Code:
# flash_image recovery recovery-RA-heroc-v1.2.3.img
flash_image recovery recovery-RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
#
And this outside adb shell, in the same directory where I did the push:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell flash_image recovery recovery-
RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
Ideas?
Click to expand...
Click to collapse
Ok. Most likely you dont have the recovery image in the directory. Try this. Copy the recovery image to the tools directory of the sdk. Then, outside of adb shell, (making sure you are in the tools directory of the sdk) execute the following command:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
This should work as long as you have the recovery image in the correct directory.
can i use the rom from modaco? or at least the themes?
magicalan said:
can i use the rom from modaco? or at least the themes?
Click to expand...
Click to collapse
No way! This rom is a GSM rom and if it works at all and does not brick your phone then it wont have the right software to make your phone work. A dev has to create a rom specially for the CDMA Hero that has the right drivers.
chuckhriczko said:
Ok. Most likely you dont have the recovery image in the directory. Try this. Copy the recovery image to the tools directory of the sdk. Then, outside of adb shell, (making sure you are in the tools directory of the sdk) execute the following command:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
This should work as long as you have the recovery image in the correct directory.
Click to expand...
Click to collapse
I am feeling really special, not being able to make this work, but that is the folder that it has been in all this time. I have even downloaded and pushed it several times. Proof:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I am not sure where I am messing up.
Thanks for all the help and hard work on this BTW!
rockcrawler said:
I am feeling really special, not being able to make this work, but that is the folder that it has been in all this time. I have even downloaded and pushed it several times. Proof:
So I am not sure where I am messing up.
Thanks for all the help and hard work on this BTW!
Click to expand...
Click to collapse
Meh. Not hard work. Just experience. The hard work is what the rom devs do. And it is difficult at first but once you get it trust me, you get it.Okay let's try this. Go into the command prompt (not adb shell) into the folder where adb and the recovery image is. Try to execute the following command and see if it works.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
This will put the recovery image on the sdcard. If this works then we will continue.
chuckhriczko said:
Meh. Not hard work. Just experience. The hard work is what the rom devs do. And it is difficult at first but once you get it trust me, you get it.Okay let's try this. Go into the command prompt (not adb shell) into the folder where adb and the recovery image is. Try to execute the following command and see if it works.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
This will put the recovery image on the sdcard. If this works then we will continue.
Click to expand...
Click to collapse
Done.
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1747 KB/s (3352576 bytes in 1.873s)
C:\androidSDK\android-sdk-windows\tools>
rockcrawler said:
Done.
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1747 KB/s (3352576 bytes in 1.873s)
C:\androidSDK\android-sdk-windows\tools>
Click to expand...
Click to collapse
Sweetness. Ok. Now type in the following:
Code:
$ adb shell
$ cd /sdcard/
$ su
# flash_image recovery recovery-RA-heroc-v1.2.3.img
That should work. Note, don't type in the $ or the #. Those are just there to show what the command prompt should look like.
THANK YOU!!!!!
chuckhriczko said:
Sweetness. Ok. Now type in the following:
Code:
$ adb shell
$ cd /sdcard/
$ su
# flash_image recovery recovery-RA-heroc-v1.2.3.img
That should work. Note, don't type in the $ or the #. Those are just there to show what the command prompt should look like.
Click to expand...
Click to collapse
Worked Like a charm, THANK YOU!!! Just booted to the recovery image and all is well.
p.s. Might want to edit the origional instructions, one your daughter goes to bed, to include the cd to the sd card, that is where my problem was.
rockcrawler said:
Worked Like a charm, THANK YOU!!! Just booted to the recovery image and all is well.
p.s. Might want to edit the origional instructions, one your daughter goes to bed, to include the cd to the sd card, that is where my problem was.
Click to expand...
Click to collapse
If I am able to I will. I understand that the instructions were a little hard to follow for beginners which was what I wanted to avoid. Glad you got it working though. Welcome to the world of Android hacking and please enjoy your stay
I'm getting suck trying to push the recovery img out to my sdcard
Code:
C:\AndroidSDK\tools>adb push recovery-RA-heroc-v1.2.3.img /sdcard/
cannot stat 'recovery-RA-heroc-v1.2.3.img': No such file or directory
I believe I have root access:
Code:
C:\AndroidSDK\tools>adb shell
$ su
su
#
I adb pushed some .apks from a Froyo zip onto my mytouch1.2 but they didnt work...
when I try to uninstall them I get a failure message... and when I try adb shell... blah blah blah..."ls" the files arent there...
any help is appreciated
how to uninstall
I've tried a few methods.
The one I've found that works the best is this : mv <source> <destination> ...it's supposed to be a move command but it actually deletes files. rm also likely does the same (eg rm <filename.filetype OR foldername>)
BEFORE using these commands though, type in
adb shell <enter>
cd <foldername> <enter>
cd <foldername> <enter>....to get to folder (directory) of your choice
**TO get to app directory to uninstall apps, do cd system -->cd app -->mv appname.apk
I use the /sdcard as the destination for the mv command - I noticed the files NEVER get moved so this is just a delete command.
You could also delete a whole folder with this command. do cd system
mv app /sdcard
(this would delete the entire app folder/directory from the device).
That's pretty much it. Works for me. Was trial and error though - adb uninstall command ALWAYS resulted in 'failure ' or 'file not found' and the same with adb shell --> # uninstall appname.apk ---> 'failure'.
So I hope this works for you! Good luck .
str8arrow
NOTE: I've had an awful time because my stupid tablet has refused to download things from the market. It stalls in the initial 'starting download' bit and then just hangs, and then says 'download failed'. Apparently there's some problem with the sync'ing but I can't log into Gmail or GoogleTalk to try to resolve this (Gmail won't allow me to enter anything - left it on overnight and it said 'getting mail' / 'sync in progress' and the sync never completed after 12 hrs. The GoogleTalk app just displayed a black screen. So I am getting nowhere.
if anyone knows how to fix this pls let me know. I'm apparently not the only one. Others /various tablets have had similar issues - I have a 7" BPDN (Pandigital black novel).
Please, help!
str8arrow
adb shell <enter>
then
cd system
cd app
mv <filename.apk> <destination> (this should move the file BUT it never shows up in destination or elsewhere, so this is effectively a delete command, you could also do mv <foldername> <destination> to delete a whole folder.
**I usu. use /sdcard as my destination. so mv filename.apk /sdcard
OR
cd system
cd app
rm <filename.filetype> does the same sort of thing.
(eg adb shell <enter>
**I tried the uninstall commands listed but.. (adb uninstall-->'failure', or 'file not found' etc, adb shell --> uninstall --> same error).
Commands for removing apps.
I run as root on all my OS's, so I don't have to navigate to my sdk directory. I just type "adb devices", I don't know how your adb is setup, but get adb running and run these commands.
adb remount
adb shell
rm /system/app/whatever.apk
Or whatever path you pushed the files to. Try running fix_permissions to make your apps run properly and stop FC issues
First sorry for my English
All credits are for zedomax, who has gotten it to work in Nexus One and for Desire is practically the same.
Sorry about "h t t p" of link adress I am very new here.
Original howto -> h t t p : / /nexusonehacks.net/nexus-one-hacks/how-to-install-ubuntu-on-your-nexus-oneandroid/
For now, I've only gotten it to work with Windows 7 and "CyanogenMod 5.0.8" and "Defrost2.0c" ROMs. The rom is important for get this works.
Practically almost all the steps are the same as in the guide of nexus one by zedomax. Well go:
Before anything, download ubuntu.zip from original HOWTO and unzip it.
Now download the updated script from zedomax.
h t t p : / /zedomax.com/android/bootubuntu
and overwrite the bootubuntu file of unzipped ubuntu.zip
1. First, you will need a rooted Desire.
zedomax say that you must have the latest version of busybox 1.16.1 but in Defrost2.0c works with 1.16.0 and cyanogenmod has 1.16.1. So we ignore this step from original guide.
2. Once you have a rooted Android phone, you will be able to run Ubuntu under Chroot.
3. Copy these six files from ubuntu.zip over into your SD card’s root folder under folder name “ubuntu“
4. Put your Desire in recovery mode. And connect it to your computer via USB.
5. I am assuming you've already installed the Android SDK (while you were rooting your phone) so let's head to your Android SDK directory and load up ADB Shell.
For Windows, go to your Android SDK Tools directory such as c:\sdk\tools and type "adb shell".
(FYI, cd is the command you can use to browse to your sdk\tools directory. For Windows, do cd \sdk\tools and for Mac/Linux, do cd /sdk/tools.
For linux and Mac, go to your Android SDK Tools directory such as /sdk/tools and type "./adb shell" or it can also be "sudo ./adb shell" for Ubuntu.
6. Once you are in the ADB shell, you should see a “#”symbol. Great, let’s start bootin’ Ubuntu right away.
7. Next, type "mount system", press enter and then type "mount sdcard". If you get this "mount: mounting /dev/block/mmcblk0p1 on /sdcard failed: Device or resource busy" ignore it, sdcard is already mounted.
8.- Next, type "cd /sdcard/ubuntu"
9.- Now we will write separate commands instead of using a script to see if something has gone wrong easily. Copy and paste each line separately and hit Enter at the end of each command.
rm /system/bin/fsrw <--(this problably return an error, ignore this)
rm /system/bin/bootubuntu <--(this problably return an error, ignore this)
rm /system/bin/unionfs <--(this problably return an error, ignore this)
rm /system/bin/mountonly <--(this problably return an error, ignore this)
cp -f fsrw /system/bin
cp -f bootubuntu /system/bin
cp -f unionfs /system/bin
cp -f mountonly /system/bin
cd /sdcard/ubuntu
chmod 4777 * <--(this problably return an error, ignore this)
cd /system/bin/
chmod 4777 *
cd /
umount sdcard
umount system
exit
Now select "reboot system now" from recovery menu of your Desire. When android fully loaded you need load up again ADB Shell.
For Windows, go to your Android SDK Tools directory such as c:\sdk\tools and type "adb shell".
Type "su" to enter superuser mode. Is very important not to forget this!
type "mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system"
type "mkdir /data/local/mnt"
10. Once that completes, type "bootubuntu" to "chroot" or boot into your new Ubuntu on your Android!
If you get the "root_localhost:/#" sign, congratulations! You've just installed Ubuntu on your Desire/Android phone!
the hardest part is complete!. From now, follows the original guide for the "nexus one" to get access to Gnome (visual desktop).
Other problems like keyboard mapping can fix it follow the original post from nexus one forum:
http://forum.xda-developers.com/showthread.php?t=718952
well, I hope this helps
thats pretty cool mate thanks ill try it out tonight when i get home from work
Thanks for this! Will give it a shot when I have a moment
Script?
Anybody fancy writing a nice script to do this for us? I'm on Holiday in Spain so I'm feeling pretty lazy.
Awesome, thanks a lot!
I'm on DJ Droid's Sense with Froyo 2.2, will try it.. hope it works! But do you know why it's rom specific? Is it because of busybox?
I tried this out, and got stuck on bootubuntu from the bootloader menu.
command not recognized. . .
everything works ok until i try to boot ubuntu from the bootloader menu.
Works great for me, SixOclock rom with busybox 1.16.2
peewster said:
I tried this out, and got stuck on bootubuntu from the bootloader menu.
command not recognized. . .
everything works ok until i try to boot ubuntu from the bootloader menu.
Click to expand...
Click to collapse
Try ./bootubuntu instead
as soon as i get home, i will.
Thnx
Is anyone nice enough to break the ubuntu.zip down into the 6 files and upload separately?
good job, works fine on SetRom 3.5
someone can post screenshoots ???
?¿?The uncompressed "ubuntu.zip" has a 2Gb .img!!!
peewster said:
I tried this out, and got stuck on bootubuntu from the bootloader menu.
command not recognized. . .
everything works ok until i try to boot ubuntu from the bootloader menu.
Click to expand...
Click to collapse
humm, are you get any error in this part?
cp -f fsrw /system/bin
cp -f bootubuntu /system/bin
cp -f unionfs /system/bin
cp -f mountonly /system/bin
and, where are you launching the bootubuntu command? You need do it from adb shell (at least until you set gnome) or terminal client directly from your phone, like better terminal emulator. Don't forget do "su" before launch bootubuntu. If it still does not work I recommend you start again the guide
why would anyone want to install ubuntu on a phone?
horadee said:
why would anyone want to install ubuntu on a phone?
Click to expand...
Click to collapse
Why would anyone not want to install ubuntu on their phone?
Ok, so it worked. I'm now logged in through adb into Ubuntu. But how can i run ubuntu directly from my phone ?
VNC?
10chars.
abc27 said:
VNC?
10chars.
Click to expand...
Click to collapse
I was wondering if you can run ubuntu (shell) directly from phone instead of adb
Anyone got screenshots?
Sent from my Desire using XDA App
This is a work metod for root your not unlocked phone !
I find a solution after update to last new version
Download this : http://forum.xda-developers.com/showthread.php?t=2143437
After download and share fail with samba windows or mac sharing, you need to mount from file manage > remote storage
After fix permission go to adb folder and type :
"adb shell"
"cd /mnt/rfs0"
"./su"
"cd /"
"ln -s /mnt /storage"
Next step go to console and type :
adb kill-server
adb shell /storage/rfs0/pwn
Next : Install apk package from phone , Reboot Phone and now your phone is rooted!
Update from Play Market SuperSu and go.
Best regards,
m.
micron said:
This is a work metod for root your not unlocked phone !
I find a solution after update to last new version
Download this : http://forum.xda-developers.com/showthread.php?t=2143437
After download and share fail with samba windows or mac sharing, you need to mount from file manage > remote storage
After fix permission go to adb folder and type :
"adb shell"
"cd /mnt/rfs0"
"./su"
"cd /"
"ln -s /mnt /storage"
Next step go to console and type :
adb kill-server
adb shell /storage/rfs0/pwn
Next : Install apk package from phone , Reboot Phone and now your phone is rooted!
Update from Play Market SuperSu and go.
Best regards,
m.
Click to expand...
Click to collapse
lol if i saw this earlier i might not have unlocked my boot loader today. =) hope someone can try this
I gave this a try earlier today. I scoured through the forum to find that the new Ubuntu doesn't install ADB drivers by default, so you need to do this manually.
Anyway, I attempted to do it and got all the way to ./su. It then prompted me with the message "./su cannot execute - Permission denied". Obviously from there I can't link /mnt to /storage and I can't run pwn because it looks for the /storage folder.
If you have any suggestions how to get ./su running, let me know.
rykin said:
I gave this a try earlier today. I scoured through the forum to find that the new Ubuntu doesn't install ADB drivers by default, so you need to do this manually.
Anyway, I attempted to do it and got all the way to ./su. It then prompted me with the message "./su cannot execute - Permission denied". Obviously from there I can't link /mnt to /storage and I can't run pwn because it looks for the /storage folder.
If you have any suggestions how to get ./su running, let me know.
Click to expand...
Click to collapse
This method works but not all intructions are here.
First, you need to change permissions of su:
chown root:root su
chmod 6755 su
then run adb shell and remount / filesystem ro rw:
mount -o rw,remount /
now you can create symbolic link and run the exploit.
You can also perform rooting manually (without creating symlink and running pwn):
remount /system partition to rw: mount -o rw,remount /system
and copy su to /system/xbin, make sure that it has correct permissions (rwsr-sr-x) and that's it.
Now you can remount partitions back to ro.
Install supersu or superuser (whatever makes you happy, just check if it works correctly, superuser didn't work for me, it didn't prompt about root permission for any app, it just gave it, no matter how configured it was), Then install busybox, if you need one.
And you're done.
YES! Glad I waited!
Sent from my XT897 using xda premium
ujoty said:
This method works but not all intructions are here.
First, you need to change permissions of su:
chown root:root su
chmod 6755 su
then run adb shell and remount / filesystem ro rw:
mount -o rw,remount /
now you can create symbolic link and run the exploit.
You can also perform rooting manually (without creating symlink and running pwn):
remount /system partition to rw: mount -o rw,remount /system
and copy su to /system/xbin, make sure that it has correct permissions (rwsr-sr-x) and that's it.
Now you can remount partitions back to ro.
Install supersu or superuser (whatever makes you happy, just check if it works correctly, superuser didn't work for me, it didn't prompt about root permission for any app, it just gave it, no matter how configured it was), Then install busybox, if you need one.
And you're done.
Click to expand...
Click to collapse
Thank you. I just tried this and it worked. Confirmed with Root Checker. :>
micron said:
This is a work metod for root your not unlocked phone !
I find a solution after update to last new version
Download this : http://forum.xda-developers.com/showthread.php?t=2143437
After download and share fail with samba windows or mac sharing, you need to mount from file manage > remote storage
After fix permission go to adb folder and type :
"adb shell"
"cd /mnt/rfs0"
"./su"
"cd /"
"ln -s /mnt /storage"
Next step go to console and type :
adb kill-server
adb shell /storage/rfs0/pwn
Next : Install apk package from phone , Reboot Phone and now your phone is rooted!
Update from Play Market SuperSu and go.
Best regards,
m.
Click to expand...
Click to collapse
Thanks, I think this is exactly what I am looking for per this thread. Unfortunately, I don't quite have the knowledge (yet) to completely understand what you mean. I've rooted several phones, but never had to use ADB before so am unfamiliar with it. Also, what do you mean by this: "After download and share fail with samba windows..."?
cscotti said:
Thanks, I think this is exactly what I am looking for per this thread. Unfortunately, I don't quite have the knowledge (yet) to completely understand what you mean. I've rooted several phones, but never had to use ADB before so am unfamiliar with it. Also, what do you mean by this: "After download and share fail with samba windows..."?
Click to expand...
Click to collapse
By reading this link you will know hot to setup samba installation on a UBUNTU live cd. After doing that on your phone you should go to your FILE MANAGER --> remote storage and add the samba share to your phone. On the UBUNTU live cd, on your samba folder you should do this:
Code:
cd /path/to/share
wget http://vulnfactory.org/public/motoshare.tgz
tar xvf motoshare.tgz
sudo chown root:root pwn
sudo chmod 6755 pwn
After that you should put your phone in USB debugging mode and connect it to your PC. On your PC your should download the platform-tools folder of the Android SDK. The platform-tools folder contains adb (MAC) adb.exe (Windows) file. After you have adb, on your WIndows/MAC PC you should type:
Code:
./adb shell
cd /mnt/rfs0
./su
mount -o rw,remount /
cd /
ln -s /mnt /storage
exit (to exit the ADB shell)
adb kill-server
adb shell /storage/rfs0/pwn
Next you should copy eu.chainfire.supersu.apk on your phone storage and install it with file manager.
Reboot your device! Congratulations, your phone is rooted
desyncron said:
By reading this link you will know hot to setup samba installation on a UBUNTU live cd. After doing that on your phone you should go to your FILE MANAGER --> remote storage and add the samba share to your phone. On the UBUNTU live cd, on your samba folder you should do this:
Code:
cd /path/to/share
wget http://vulnfactory.org/public/motoshare.tgz
tar xvf motoshare.tgz
sudo chown root:root pwn
sudo chmod 6755 pwn
After that you should put your phone in USB debugging mode and connect it to your PC. On your PC your should download the platform-tools folder of the Android SDK. The platform-tools folder contains adb (MAC) adb.exe (Windows) file. After you have adb, on your WIndows/MAC PC you should type:
Code:
./adb shell
cd /mnt/rfs0
./su
mount -o rw,remount /
cd /
ln -s /mnt /storage
exit (to exit the ADB shell)
adb kill-server
adb shell /storage/rfs0/pwn
Next you should copy eu.chainfire.supersu.apk on your phone storage and install it with file manager.
Reboot your device! Congratulations, your phone is rooted
Click to expand...
Click to collapse
Wow, thanks for this. I was considering trying to condense down the instructions myself before I did this, but you beat me to it, and did a better job than I would have, considering I'm a novice at this stuff.
So your method uses a linux boot for samba, but then the rest is done on windows. Question: could you do the adb stuff on Linux? Seemed like some of the posts in the atrix threads were doing it that way, and I was just curious. I have mint 14-64 bit on a couple of my machines, as well windows, and was thinking this would be an opportunity to learn it a little better.
Sent from my XT897 using xda premium
Hello,
and what if I have unlocked bootloader? Is there any other way to root this phone?
desyncron said:
By reading this link you will know hot to setup samba installation on a UBUNTU live cd. After doing that on your phone you should go to your FILE MANAGER --> remote storage and add the samba share to your phone. On the UBUNTU live cd, on your samba folder you should do this:
Code:
cd /path/to/share
wget http://vulnfactory.org/public/motoshare.tgz
tar xvf motoshare.tgz
sudo chown root:root pwn
sudo chmod 6755 pwn
After that you should put your phone in USB debugging mode and connect it to your PC. On your PC your should download the platform-tools folder of the Android SDK. The platform-tools folder contains adb (MAC) adb.exe (Windows) file. After you have adb, on your WIndows/MAC PC you should type:
Code:
./adb shell
cd /mnt/rfs0
./su
mount -o rw,remount /
cd /
ln -s /mnt /storage
exit (to exit the ADB shell)
adb kill-server
adb shell /storage/rfs0/pwn
Next you should copy eu.chainfire.supersu.apk on your phone storage and install it with file manager.
Reboot your device! Congratulations, your phone is rooted
Click to expand...
Click to collapse
well that sounds a bit intimidating but thanks for spelling it out. I'll try to work up the nerve and make some time to give this a try.
Just curious, but why can't this be compressed into a one click batch file like before?
vangelm said:
Hello,
and what if I have unlocked bootloader? Is there any other way to root this phone?
Click to expand...
Click to collapse
If your bootloader is unlocked, you can easily root. You don't need any exploits etc.
Install TWRP, it will automatically root the device. Or, install CWM and then install SuperSU afterwards, which will root the device.
arrrghhh said:
If your bootloader is unlocked, you can easily root. You don't need any exploits etc.
Install TWRP, it will automatically root the device. Or, install CWM and then install SuperSU afterwards, which will root the device.
Click to expand...
Click to collapse
It works, thank you, have a nice day.
vangelm said:
It works, thank you, have a nice day.
Click to expand...
Click to collapse
Can you share what you did? Instructions seem to say that I need to install GooManager? The summary of GooManager says I need root to use it. TIA.
micron said:
This is a work metod for root your not unlocked phone !
I find a solution after update to last new version
Download this : http://forum.xda-developers.com/showthread.php?t=2143437
After download and share fail with samba windows or mac sharing, you need to mount from file manage > remote storage
After fix permission go to adb folder and type :
"adb shell"
"cd /mnt/rfs0"
"./su"
"cd /"
"ln -s /mnt /storage"
Next step go to console and type :
adb kill-server
adb shell /storage/rfs0/pwn
Next : Install apk package from phone , Reboot Phone and now your phone is rooted!
Update from Play Market SuperSu and go.
Best regards,
m.
Click to expand...
Click to collapse
**** I wish I saw this before i went to Motorola for my warranty voiding unlock code
---------- Post added at 05:01 PM ---------- Previous post was at 04:50 PM ----------
arrrghhh said:
If your bootloader is unlocked, you can easily root. You don't need any exploits etc.
Install TWRP, it will automatically root the device. Or, install CWM and then install SuperSU afterwards, which will root the device.
Click to expand...
Click to collapse
I like TWRP but CWM in my opinion is better (more supported).
amateurhack said:
Question: could you do the adb stuff on Linux? Seemed like some of the posts in the atrix threads were doing it that way, and I was just curious. I have mint 14-64 bit on a couple of my machines, as well windows, and was thinking this would be an opportunity to learn it a little better.
Sent from my XT897 using xda premium
Click to expand...
Click to collapse
Yes. This can be done in Linux. I did it entirely with a LIVE USB. However, adb might not be installed by default (on mine it was not). To install it, do the following:
sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt-get update
sudo apt-get install android-tools-adb android-tools-fastboot
Click to expand...
Click to collapse
This will prevent you from running into errors when you start typing: adb shell
swintec said:
Can you share what you did? Instructions seem to say that I need to install GooManager? The summary of GooManager says I need root to use it. TIA.
Click to expand...
Click to collapse
Either use GooManager or the fastboot flash method. I think you do need to be rooted in order for GooManager to get the permissions it requires to flash recovery... So in that case, the only way initially to flash might be fastboot flash... Sorry.
alexwoellhaf said:
I like TWRP but CWM in my opinion is better (more supported).
Click to expand...
Click to collapse
Not even sure what this means. Any zip you can flash with CWM, you should be able to flash with TWRP. No?
They're both recoveries. One is touch-based, one isn't.
Having trouble with abd
Im running Ubuntu 12.04 full install (not live CD)
When I connect my phone, dmesg see the new device, and so does lsusb
dmesg
Code:
[ 290.617377] usb 2-1: USB disconnect, device number 2
[ 295.476023] usb 2-1: new high-speed USB device number 4 using ehci_hcd
[ 295.611624] scsi9 : usb-storage 2-1:1.0
[ 296.610626] scsi 9:0:0:0: Direct-Access motorola XT897 0001 PQ: 0 ANSI: 2
[ 296.611152] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 296.613548] sd 9:0:0:0: [sdc] Attached SCSI removable disk
lsusb:
Code:
Bus 002 Device 004: ID 22b8:2e36 Motorola PCS
However no matter what, when I run "adb devices", the phone does not show up.
51-android.rules
Code:
SUBSYSTEM=="usb", ATTRS{idVendor}=="22b8", MODE="0666"
This is what I get with adb
Code:
[email protected]:/tmp/share# adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
[email protected]:/tmp/share#
What else can I do???
desyncron said:
By reading this link you will know hot to setup samba installation on a UBUNTU live cd. After doing that on your phone you should go to your FILE MANAGER --> remote storage and add the samba share to your phone. On the UBUNTU live cd, on your samba folder you should do this:
Code:
cd /path/to/share
wget http://vulnfactory.org/public/motoshare.tgz
tar xvf motoshare.tgz
sudo chown root:root pwn
sudo chmod 6755 pwn
After that you should put your phone in USB debugging mode and connect it to your PC. On your PC your should download the platform-tools folder of the Android SDK. The platform-tools folder contains adb (MAC) adb.exe (Windows) file. After you have adb, on your WIndows/MAC PC you should type:
Code:
./adb shell
cd /mnt/rfs0
./su
mount -o rw,remount /
cd /
ln -s /mnt /storage
exit (to exit the ADB shell)
adb kill-server
adb shell /storage/rfs0/pwn
Next you should copy eu.chainfire.supersu.apk on your phone storage and install it with file manager.
Reboot your device! Congratulations, your phone is rooted
Click to expand...
Click to collapse
I am trying to run through these steps. For starters, when I enter the 'adp shell' I do not have a /mnt/rfs0 directory. The shared samba directory actually mounts at /storage/rfs0. No biggie. I go to that directory to run ./su. The su command runs, and I can see a pop up notification on my phone indicating the adb shell has been granted admin rights. The problem is that the ./su command never returns. As a matter of fact, if I just left it sit there, I get the admin rights pop up notification on my phone about once per minute so it seems like the su command is in some loop.
At this point I am stuck. I cant remount my file system as read/write without SU. I can run the ./su command in a different process, either in another adb shell or with the ./su& command but that does me no good as I cant execute any root commands in that same process.
Is there something that needs to change with the su command for the newer version my phone is running? I am running 9.8.2Q-122_XT897_FFW-5.
Thanks.
Use 'motochopper', search for it on xda then root is just one click away
Sent from my XT897 using xda app-developers app