I have an issue with a Sprint TP2 with WIFI. I'm able to connect the router but not able to access the internet. If I connect my phone to the laptop I can use the internet if I change the (Connections:connections: network management) from Sprint to My Work Network but I'm not able to connect via WIFI. I have (Connections: wifi:configure network adapters) to WORK or THE INTERNET for Broadcom 802.11 DHD Network Adapter but it doesn't help. Under Connections: tasks:MY WORK NETWORK:Set up my proxy server I check the box next to THIS NETWORK CONNECTS TO THE INTERNET but it won't stay checked. The profile for the router has been deleted and recreated with no success. I've tried other WIFI routers with no success. My touch pro has no issues. BTW: I'm using version WM6.5.
Need a little help. My G-tab is running current VEGAn-TAB rom. I am having problems getting the wifi to actually connect. My icon shows a good signal, and inside the wireless settings I am showing connected to my wireless network. I also went to advance settings and made sure wifi never sleeps. All apps that need internet connection (market, browser, etc.) show no data connection.
Used yesterday with no problems. My laptop is running on same network and working fine.
Any ideas?
have you restarted? Sometimes happens to me too but it's nothing a simple restart can't fix.
Yes. Restarted several times. Didn't work.
Oddly enough I have a Airave from Sprint to boost my cell phone signal, and it may have been the problem. When I unplugged it and returned to my G-Tab later the Wifi was working. Not sure why.
TexasZac said:
Yes. Restarted several times. Didn't work.
Oddly enough I have a Airave from Sprint to boost my cell phone signal, and it may have been the problem. When I unplugged it and returned to my G-Tab later the Wifi was working. Not sure why.
Click to expand...
Click to collapse
Could be competition on the 2.4 GHz frequencies. Some wireless phones and even microwave ovens can trash a wifi connection.
Moved to general
Anyone else having WiFi problems with Vegan? Since installing this mod, I can only connect to a WEP signal and not a WPA-secured network.
I can't connect either. Trying to connect to a wep wifi and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
LittleBirds said:
Anyone else having WiFi problems with Vegan? Since installing this mod, I can only connect to a WEP signal and not a WPA-secured network.
Click to expand...
Click to collapse
No problems with home WEP, office WPA2-PSK and several wide open public ones. I just wish the damn thing would auto-connect to the ones I have been to before.
outofoffice said:
I can't connect either. Trying to connect to a wep wifi and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
Click to expand...
Click to collapse
My only guess is, if its a 5Ghz N Router you should check to see if it allows
2.4Ghz signals and not just 5Ghz. The GTAB doesn't seem to support connections at 5Ghz.
I just changed over from TNT Lite(latest version) and was able to connect fine but I didn't like the interface and some of the features. I've loaded Vegan tab 7.0.0 and I was able to connect at work (802.1 EAP) network but I can't connect to a wep wifi at home (were several other pc's are connected and working fine) and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
I have a Linksys wrt300n router and have confirmed that it configured to accept 2.4Ghz & 5Ghz signal and have rebooted several times with no luck.
I don't have a lot to add to help you troubleshoot, but I can say that I am running VEGAn Gingerbread RC1 with pershoot's latest kernel. I am able to connect at home on a WAP2-PSK (Linksys Linux based G/N) at home, WAP2-PSK at the cabin (Linksys's cheapest G/N), and at work on a 802.1 EAP network (Cisco).
I has some unexplained issue mounting the internal storage on a computer. After a little head scratching, I started to wonder if it had something to do with the custom kernel I was running. I flashed Pershoot's latest kernel and my problems went away.
I mention all that to suggest that you might try flashing a different kernel and see if you get different results.
I have an issue with vegan where when i reboot the device (or turn off and turn on) wifi is off even if left on when turning off, i have to manually turn on wifi after every boot.
Sent from my DROIDX using XDA Premium App
fajordan said:
I just changed over from TNT Lite(latest version) and was able to connect fine but I didn't like the interface and some of the features. I've loaded Vegan tab 7.0.0 and I was able to connect at work (802.1 EAP) network but I can't connect to a wep wifi at home (were several other pc's are connected and working fine) and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
I have a Linksys wrt300n router and have confirmed that it configured to accept 2.4Ghz & 5Ghz signal and have rebooted several times with no luck.
Click to expand...
Click to collapse
Have you checked to see if you're using MAC address filtering, and if so, that your gTab's MAC address has been added to the whitelist on the router? I get the feeling that that may be the issue. You have the WEP key on your device, but your router's still blocking it. I'm running the same ROM you are, and have had absolutely no troubles connecting to my work network with 802.1 PEAP, WPA/WPA2-TKIP and AES at home, and multiple makes/models of access points/routers.
Hmmm. Just reread your original. Now I'm wondering if you have enough DHCP leases available on your router. If you're out, you'll have to wait until a lease expires or add some more to your scope of addresses.
Hope some of that helped in some way...
did anyone tried and tested while connected to a wifi then you activated wifi hot-spot? it always says "Turn off wifi to use wifi hot-spot" any one have ideas on these on how to work both while connected to a wifi then activated wifi hot-spot because hot-spot only works with mobile data network.
Its not possible
A mobile can either recieve wifi or wifi hotspot
This may help u:thumbup:
Hit thanks if i helped
Sent from my GT-S7500
Wifi hot spot means to broadcasting capability, i.e in case of a router it has hotspot which broadcast the network. router only connects devices to it's network or gateway. router dont use this wifi to get connected to another network. because it is impossible to do broadcasting and also to receive another broadcast from another device using only one gateway.
So if you are connected to a network using wifi then how you will be able to broadcast or create a wifi hotspot??
May be I made you understood..
Hi,
I have multiple devices at home using the WiFi fine (iPad, Laptops...)
But with two android devices (Nexus 5 and Galaxy S 4, both on unmodified) I have the same problem.
It connects to the network, and works just fine, but after some time, there isn't any internet connection, although it shows as if it's still connected.
By disabling and enabling Wifi I get internet connection again, but it's really annoying.
Here's my setup:
Edimax router as AP
2.4 GHz (B+G+N)
Visible ESSID
Channel number 6
Encryption: WPA 2 (AES) pre-shared key (passphrase)
No MAC Filtering
EDIT: This router is a switch with wireless, it is connected to a diffrent router that is connected to the internet.
What can I do? Should I modify any of my WiFi settings?
Thanks!
did you try to disable energy saver?
makissta said:
did you try to disable energy saver?
Click to expand...
Click to collapse
If asking you're whether I had disabled the WiFi optimization in the WiFi settings, yes I have...
I have just only remembered that this router is actually a switch with wireless. The internet is connected to the other router, which is connected to the router i'm asking about (EDIMAX) which acts as a switch.
when i try to connect to my home or office wifi. I cannot connect to any of the wifi and it just shows the ssid and it just say "saved" and it doesnt connects
need some help.