Related
Hi
Has anyone had any problems with the
"BLACK RESIN Soft Gel Case for the HTC DESIRE" from ebay
As it is quite 'firm' I'm concerned over time it will scratch or damage the desire's casing ..
Does anyone know of a decide soft flexible silicon case for the desire. One that can't damage the casing...?
any ideas / or comments ?
you might want to look at the invis shield thread which people are using, that seems to do the trick and is good
Thanks. Not sure I like them.
I got one. It is quite difficult to fit the desire in as the case is quite tight. It looks ok though after fitting the phone in
I have been using a 'Gel' case off ebay for about a month now and i too had concerns that it would damage to phone but I have taken it off a couple of times and there isn't a single mark anywhere on the phone!
It was a UK based one for like £2 i got.
Phil
I think a gel case would be OK, but this is a 'resin' case.. which is a little firm..
Thats what concerns me !!
Well mine is like a resin I guess. Like soft plastic material. It is quite firm and takes a bit of getting the phone in/out but like I say it hasn't make a single mark on the phone.
Phil
Cheers Phil..
I've ordered a cheap soft silicone case.. I'll see how that compares..
I had one of the soft silicone ones and although they are good protection wise and easy to get on and off I had a couple of issues with it.
I found that it made the rear of the phone go 'weird'. Hard to describe really but it made marks on the back cover with it being rubberised and having the rubber case on it left marks on the cover. They have rubbed off and dissapeared over time but I only used the case for about a week.
I found that it made the phone very bulky hence why i went for the 'Gel' one.
It was hard to get it in and out of my pocket as it gripped on my clothes too much.
Phil
Thanks for the replies.
The soft silicone case has arrives, doesn't feel as nice or fit as well as the resin case.
But doesn't feel like it will do any damage to the phone.
I'll see how I get on
i have one if those soft silicone cases, and ive noticed that when i remove it the back of my desire is unusually shiny, and now im wondering if that will return to the original non shine surface..
I had the same thing. It has returned to the normal state after using a gel case for a while.
Phil
philje123 said:
It was hard to get it in and out of my pocket as it gripped on my clothes too much.
Phil
Click to expand...
Click to collapse
This is why I went with the cheapo Gel case. I've had mine off and on a few times - no marks or anything. I was sending a text in a club and the phone was knocked out of my hand across the floor. No marks on case or anything.
The silicone case I have for my Blackberry is great although it tends to pull everything out of your pocket including the inside of the pocket - little annoying. Although it sticks to everything. you could leave it on the dash board of the car whilst driving and it wouldnt move at all.
pro's and cons. I prefer the gel one personally. Although the silicone stickyness comes in handy.
haha, my soft silicone case lost some of its traction i dont know why lol.
I've been looking around for cases for my desire,
can anyone recommend any sites that sells the resin gel ones the cheapest and has reputation for fast shipping?
I live in Canada, as much as I enjoy buying stuff online, I feel like I have to wait for like 100 years for an item to get here.
just changed my resin case to a soft gel.
Feels better add that to my new pouch that take the desire in the gel case..
Sorted
So I'm looking for some protection but need som recommendation.
Found those two on Ebay.
Black Faceplate Rubberized Cover Case For HTC Desire
&
Crystal Clear Cover Case For HTC Desire U.S. Cellular
Anyone have one of those and can give some feedback?
Or do you have some recommendations for another protective case/screen protector? Please take some time and post befor i hire small FBI midgets to protect my phone
Sorry can't post links yet, but a quick google of HTC Desire Official Pouch Case will get you to what i mean, i purchased it from amazon for around £7 and quite prefer it over the more permanent cases which you posted, the phone fits quite snug and it has a handy tab to save you struggling to get it out.
As long as you take care when getting your phone from the case i suppose a screen protector isn't needed either. Although if you're the clumsy type then by all means choose the type you posted but it's a nice phone and shouldn't be made to look and feel like a brick imo
I don't have any protection for my Desire and sofar there is one minor scratch on the display because I had my keys with it when I was drunk.
The screen is pretty sturdy aslong as you don't put metal/sharp objects in the same pocket.
Hey all,
ive been trying some of the best cases out there for my SGS including PDair, Case-Mate Though, TPU, SGP and some other cheap onens..
(the SGP one actually claims to be an anti slip material but got nothing to support it..)
Some of them have a great design, othere are very protective but non have the feature im realy looking for which is what called 'Anti-Slip'. most of my IPod cases for example had that ability in them. a simple silicone that that helps your device not slip from your hands.
Does anyone knows about any silicone case that have this?
Thanks!
Have you ever tried gel type cases - they feel like rubber and very grippy
k!pps said:
Have you ever tried gel type cases - they feel like rubber and very grippy
Click to expand...
Click to collapse
Thanks for your reply.
I saw it before on some IPhones and didnt like its touch feeling very much. also, i think its too hard to provide a good protection..
btw, please also forgive me for any wrong word selection, english is not my mother lang
Hi there...
Did you already saw this one??
Samsung Galaxy S Commuter Series Case from OTTERBOX
Do a search on Youtube to see review...
I can't post any links yet...
I have one just like this
http://cgi.ebay.com/Samsung-Vibrant-Galaxy-S-I9000-Genuin-Mesh-Case-Red-/320605390228
Surf around and you might find a slightly better deal, but make sure its that same one. It has a very rubbery feel which doesnt slip at ALL, i loved it. Only thing is that it doesnt offer much protection from falls.
the cheapest safest option is to just put some industrial tape around your hand and stick your phone to it
this way your phone will never slip and is always in your hand.... you dont need to waste time searching your pockets ..
but the only downside i have is i have to wipe my rear with my left hand now
apache86 said:
Hey all,
ive been trying some of the best cases out there for my SGS including Case-Mate Though
Click to expand...
Click to collapse
Seriously?! What do you do to have such slippery hands? On second thought, don't answer that
I have a Case-Mate Tough Case and that's not only "rubbery", but also very structured giving a VERY good grip. In fact, I had problems getting it in and out of my pocket, which annoyed me so much I gave it up.
If the Case-Mate Tough wasn't grippy enough, superglue is the only option (or duct tape if you're going for the not-so-permanent option)
Go get some skateboard Grit Tape. Guaranteed non slip...
Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
galaxyhtc said:
Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
Click to expand...
Click to collapse
the otterbox's rubber on its case looked low grade compared to the seidios and case mates. it looked like what trident was using..
i was looking into the naztech but i didnt like how there is a bar on the top of the screen lol. id like to see a review on it. might get the case mate pop
If it helps your decision I had one otterbox which I had to have replaced thru otterbox due to silicone stretches and the phone will actually slide up and down in the case. had the replacement for about a month and just took off the second one today due to complaints of me sounding muffled and any back to the old dependable tpu case even though it is a ***** to get out my pocket and attracts lint it is my fave
Sent from my HTC Pyramid using xda premium
fireishott said:
If it helps your decision I had one otterbox which I had to have replaced thru otterbox due to silicone stretches and the phone will actually slide up and down in the case. had the replacement for about a month and just took off the second one today due to complaints of me sounding muffled and any back to the old dependable tpu case even though it is a ***** to get out my pocket and attracts lint it is my fave
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
yeah.. and if you watch the video reviews on it they didnt seem to pleased either lol. im dispointed in otterbox for this case.
Thanks for the info, i don't know though, was the otterbox easy to get in/out of your pocket.
galaxyhtc said:
Thanks for the info, i don't know though, was the otterbox easy to get in/out of your pocket.
Click to expand...
Click to collapse
Yeah it was super easy due to the hard plastic that covered the silicone layer that is one thin I miss about it and am still on the fence about putting it back on. I will say my phone survived a few high drops ( I am a cable tech and it fell from a ladder about 18 feet to concrete with out a scratch)
Sent From My HTC Sensation 4G powered by Sense-O-Matic
Wow, you just made my decision harder.... !!! Haha thanks though, i'm sure i can't go wrong with either of these cases, but I just want to know which is the best.
OK, I'm pretty sure that the Tough Case and Vertex are out:
Tough Case: I saw that the rubber wraps around the screen on the phone, and can attach lint, also, it does seem a bit bulky.
Vertex: Lack of information is difficult. From the pics I don't think it'll work out for me.
Personally I use zagg skins now. They are seriously epic. I have always hated all phone cases because of the bulk they add no matter how thin. But the zagg skins are tough...real tough. And add essentially no weight/thickness to the device. When I got mine i was trying to scratch the back and screen to no avail. zagg also offers a lifetime warranty, but I have no idea what their limits are on it. Plus you can customize it with any picture you want.
Just my opinion. Good luck with your choice.
I have both Case Mate POP and Otterbox Commuter... otterbox has far better plastic because it cant get scratched at all. The case mate pop looks like it's 10 years old after a week. Still I user POP rather than the otterbox because the rubber on otterbox is like a MAGNET for all the dirt that is around you. I used to clean the rubber, and put it in my pocket, and when I get it out it's entirely covered with dust... I don't even know what were they thinking when they were making it. Another thing about the otterbox is that the earphone jack cover never fits like it is supposed to.
I ordered this a week ago because it looks funny
http://www.case-mate.com/HTC-Sensat...-Sensation-Sensation-SE-Tut-Silicone-Case.asp
I will order the case mate tough also... I hope that will be what I want at last
Wow, thanks for the info! So which one of those has a thinner/less bulky form factor, and is easier to get in/out of your pocket?
Case
I bought a Yoobao case off of Ebay, I love it. It is very tough and thin holds the phone tight.
Ehh, thanks for the info, but I already have a TPU and while it is nice and slim, I want something with a little more protection.
I'll put my two cents in, I just got the vertex and I'm very impressed. I've had the commuter and didn't like it. The plastic seemed cheap to me and was too slick. I also had a tpu case that was ok but I didn't think it would protect very well and made the power difficult to press. The vertex is quality, looks and feels very nice and fits great.
Sent from my NookColor using xda premium
Hi, thanks for the input! Does the back material make it easy to get in & out of pockets easily? And also, is it thinner than your otterbox?
galaxyhtc said:
Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
Click to expand...
Click to collapse
Haven't tried the Case Mates yet, nor the Seidio, BUT:
Naztech is a POS - crappy build, plain & simple.
Otterbox's silicone is too damn loose - quoting others here.
Just saying......
Well, I've been on these forums reading for about 5 months now, but this is my first post...
I've had the Casemate Tough Case for the same amount of time I've had my Sensation; about 5 months.
The tough case's hard backing makes it very easy to slip in and out of your pocket. The only exposed rubber is a small section at the top and bottom of the phone and a very thin rim around the screen, the rest is the hard plastic. I never notice that it's collecting lint\dirt, except when I remove the case, there is a small rim of dust collected under the rubber rim, but you can't see it until the case is off.
The exposed rubber parts always look clean and smooth, same goes for the hard plastic outer shell.
The farthest I've dropped my phone with the case on is off the bar... so maybe 4 feet or so? No damage to the phone or the case.
I haven't tried out any other smartphone cases, so I don't have a large frame of reference, but I haven't had a single issue with the tough case. Hope this helps!
master1454 said:
Haven't tried the Case Mates yet, nor the Seidio, BUT:
Naztech is a POS - crappy build, plain & simple.
Otterbox's silicone is too damn loose - quoting others here.
Just saying......
Click to expand...
Click to collapse
Have you actually tried the naztech case? I'm sitting here right now literally starting at it trying to find a problem with something and I can't. I can't compare it with the tough case but its better than the otter.
Like I said before, and I don't know if this even matters, the naztech has cut outs for all the holes on the back cover, none of the other two piece cases have that feature.
As far as the plastic, the naztech has a rubberized back which makes it easier to hold than the otter but still slides into a my pocket easy.
i think you guys should check momax case....
For what it's worth...
I picked up one of these on Amazon:
http://www.amazon.com/gp/product/B0055DHCKS/ref=oh_o00_s00_i00_details
Inexpensive, fits very well, easy to slip on and off, isn't a lint magnet, reminds me of the great Boxwave slip cover I had on my Nexus One.
Highly recommended.
I really like how the premium materials on the s6 feel but it's likeholding a piece of ice dipped in lube.. crazy slippery. this also makes for very awkward hand positioning if you dare use one hand (which i attempt to do).. this phone is already kinda too-big for me ... also, it's incredibly insecure inside a pocket. if you lie down, it will fall out. if you're wearing something loose like sweat pants and sit down, it will fall out..
i'm looking for a solution to improve grip but i HATE cases .. especially on a phone this big. something like a skin/wrap seemsperfect but I'd like to know how much grip these add. Ideally, I feel like 2 thin strips of a grippy vinyl along the edges would be enough but more realistically, a full back wrap would likely be the way to go.
dbrand and slickwraps seem to be the most popular ones. i like the look of the leather wraps but it seems like they feel more like paper in person (based on youtube reviews). I wish someone made a clear full-back cover made out of a gripper plastic (like old school palm pilot screen protectors).. that would likely work.
anyone have experience/recommendations?
The InvisibleShield HDX by Zagg works really nicely for the S6.
I've got to say, though. Nothing could be more slippery than the HTC One M8. Awesome phone, but very slick.
The official Samsung shell case adds some grip while still retaining the look of the phone. It's lightly textured hard plastic.
I remember seeing a post a long time ago where someone sprayed Plasti-dip on the back of their phone. I'm sure that would definitely add grip, and it is reversible. Not sure it's something I'd want to do, but it is an option.
Just did a quick search :
http://lifehacker.com/5716776/diy-rubberized-phone-backing
P.s.- you can get Plasti-dip in multiple colors, including clear.
I am really loving The neo hybrid by spigen.
Probably a bit thicker than a skin, but still minimalist, try the Spigen thin fit BLACK color. The other colors (maybe there aren't other colors for the S6?) are slippery. The black one has a very nice grip, but still easy to take out of pockets. Also, it protects the camera lens .
I have the Samsung shell case, seriously its like having no case on the phone but does add grip
http://pages.ebay.com/link/?nav=item.view&id=121605073646&alt=web
Comes in other colours.
a suggestion
You might want to look at the Tech21 Evo Check at Best Buy. It adds very little bulk to the phone, but a whole lot of grip. I'm waiting for an Urban Armor Gear Outland to be delivered , and although the Tech21 case is not cheap, it gives me peace of mind until the UAG arrives.
I got a spigen clear flexible skin on ebay for around 12 dollars. Very nice slim and adds a lot of grip and still lets the phone shine thru
I got dbrand leather carbon finer skin for the back. It's less slippery to hold and no bulk added.
there is really not a solution for you.
Just get a SUPER thin case
I always found adding a cheap clear skin protector on the back add just the amount of grip you need. Worked for the Sony Z3 as well as htc one M7/M8 from my personal experience.
You could wrap your phone once around with Saran Wrap. Might look a little funky, but it will give you some more grip.
if you don't want a case but want grip and never drop your phone then checkout the flygrip it uses double sided adhesive to attach to your phone and also works as a kickstand in potrait and landscape mode , been using it for years on all my devices , but if you wireless charge then it will get in the way and wont work
I bought a pure gear case. Very slim with rubber siding and clear!! I've used them on several phones. Great feel and low bulk. I also added a screen protector
Sent from my iPad using Tapatalk
I know these are expensive but they seem to be a great quality and are truly the thinnest case I have ever seen. You should be able to try them out at your local Best Buy to see if you like it.
http://www.evutec.com/category-s/1904.htm
polo79 said:
I know these are expensive but they seem to be a great quality and are truly the thinnest case I have ever seen. You should be able to try them out at your local Best Buy to see if you like it.
http://www.evutec.com/category-s/1904.htm
Click to expand...
Click to collapse
Love those descriptions hahaha japanese warriors wore what these cases are made of... hahaha . It's really just plastic, guys, come on.
jadaress1 said:
I have the Samsung shell case, seriously its like having no case on the phone but does add grip
http://pages.ebay.com/link/?nav=item.view&id=121605073646&alt=web
Comes in other colours.
Click to expand...
Click to collapse
hello dont agree, i think its a very well made case, if the case drop, it will hurt one of the corner and will preserve the metal part,try to put the phone on a table in all position you want, the lens and metal part will never in contact with anything (sorry for my english