ROM for recovery G2X under the NVFLASH
This method necessary!
If the device is not loaded and not firmware in other ways! (If you downloaded the wrong firmware in the device)
I took the unpacked program files KDZ and added to them NVFlash and created BAT file!
Download ROM: http://www.mediafire.com/?wfokxjxi7rfoaey
Mirror: http://www.megaupload.com/?d=C5LBU3DS
Download APX driver: http://www.mediafire.com/?k559zgjlqkd5ted
Installation Instructions:
Download both files
Unpack it to the C drive to their respective folder
Remove the battery
Hold Vol Up/Down (and keep them held)
Insert the USB cable
Install APX driver from the your APX folder
For windows 7(and vista? please confirm):
Open Device Manager in Windows and you should see "APX Device" listed with an error
Right click on the APX device
Select 'Update driver software'
Select 'Let me pick...'
Select 'Have disk'
Browse to directory you extracted the APX Driver
Select the *entire* 'APX Driver' folder
Accept any warnings, including the big red alert (you may need to disable UAC)
Now in Device Manager under 'USB Controllers' you should have an 'NVIDIA USB Boot-recovery driver for mobile devices'
If not, uninstall the driver, reboot, rinse and repeat
Unplug everything
Hold Vol Up/Down (and keep them held)
Insert USB cable
open your ROM folder:
Run Flash.bat file and wait for the process
After the logo appears on the LG phone
Unplug USB cable
Insert the battery
enjoy!
After that, I recommend to firmware device with help programms KDZ or LG Mobile Update
I'm confused as to what this is? I'm guessing stock rom flash through nv flash? Kind of like odin for samsung phones?
Sent from my LG-P999 using XDA App
Can't wait to check this out when I get home later. Regarding the kdz file, what exactly were you able to unpack from it? I've been able to extract 2 files (a very large .wbd file and a .dll file) but I couldn't figure out how to unpack them further, specifically the .wdb file.
ILUHA_89 said:
I took the unpacked program files KDZ and added to them NVFlash and created BAT file!
Click to expand...
Click to collapse
Can you post the DLL for the G2X so we can use the LG Utilities to unpack KDZ files for this device please. So far we have been unable to get the proper DLL that enables us to unpack these files. If you unpacked the KDZ you must have the DLL unless you used another method to extract the files from the KDZ. Please elaborate on how you accomplished this. Both phburks and I have been working on this and so far we have had no success.
Smallsmx3 said:
I'm confused as to what this is? I'm guessing stock rom flash through nv flash? Kind of like odin for samsung phones?
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
It is for people that have mucked up their phones to the point where LG Updater and KDZ Flash are not possible. This can be caused by many issues including, but not limited to, people flashing the O2X baseband to a G2X device. This method is purported to flash the entire Gingerbread ROM at the lowest possible hardware level. Hopefully this method is legit, but nobody has confirmed they have done it yet with the exception of the OP. Yes it is similar to ODIN for the Samsung but operating at an even lower level. With the NVFlash capability Tegra2 devices are virtually unbrickable.
jboxer said:
Can you post the DLL for the G2X so we can use the LG Utilities to unpack KDZ files for this device please. So far we have been unable to get the proper DLL that enables us to unpack these files. If you unpacked the KDZ you must have the DLL unless you used another method to extract the files from the KDZ. Please elaborate on how you accomplished this. Both phburks and I have been working on this and so far we have had no success.
It is for people that have mucked up their phones to the point where LG Updater and KDZ Flash are not possible. This can be caused by many issues including, but not limited to, people flashing the O2X baseband to a G2X device. This method is purported to flash the entire Gingerbread ROM at the lowest possible hardware level. Hopefully this method is legit, but nobody has confirmed they have done it yet with the exception of the OP. Yes it is similar to ODIN for the Samsung but operating at an even lower level. With the NVFlash capability Tegra2 devices are virtually unbrickable.
Click to expand...
Click to collapse
You described it right!
This method has helped resurrect my device!
ZeroT| Demented said:
So the point of this utility if it works is to make the g2x un f***able like even if u do u can fix?
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Yes. It is almost as good as JTAG flashing the device. For Galaxy S devices using ODIN you still have to have the 'software download' mode working in the ROM and it is possible to brick a Galaxy S beyond the point of even getting this mode to be accessible leaving you the only way to fix the device through disassembling it and flashing via the JTAG pads. Using the NVFlash method you are flashing directly to the hardware through they Hynix flashing chip. I had another phone with a similar capability (I-Mobile i858 - Yuhua Touchstone device) and no matter how badly I F'd it up (I was developing custom roms for it) I had the similar low level flashing tool that could reflash the phone to stock so I could start over with a clean slate. If this method is legit, this is a big boon to the dev community for this device.
jboxer said:
Can you post the DLL for the G2X so we can use the LG Utilities to unpack KDZ files for this device please. So far we have been unable to get the proper DLL that enables us to unpack these files. If you unpacked the KDZ you must have the DLL unless you used another method to extract the files from the KDZ. Please elaborate on how you accomplished this. Both phburks and I have been working on this and so far we have had no success.
It is for people that have mucked up their phones to the point where LG Updater and KDZ Flash are not possible. This can be caused by many issues including, but not limited to, people flashing the O2X baseband to a G2X device. This method is purported to flash the entire Gingerbread ROM at the lowest possible hardware level. Hopefully this method is legit, but nobody has confirmed they have done it yet with the exception of the OP. Yes it is similar to ODIN for the Samsung but operating at an even lower level. With the NVFlash capability Tegra2 devices are virtually unbrickable.
Click to expand...
Click to collapse
After trying to firmware device with program KDZ or LG Mobile Update in folder C: \ ... \ Aplication Data \ folder appears "LGMOBILEAX" which contains the firmware files!
That's All
ILUHA_89 said:
After trying to firmware device with program KDZ in folder C: \ ... \ Aplication Data \ folder appears "LGMOBILEAX" which contains the firmware files!
That's All
Click to expand...
Click to collapse
So you got them after the LG Updater extracted the KDZ into its component files. phburks and I didn't get that far as we didn't want to connect our already updated devices to the updater. To get to the point you did where you could grab the individual files you would have had to click the start update button. Good work.
I have 7-zip on my computer but I am unable to open up the file I just downloaded. Can you put it in another format and upload to megaupload or mediafire please? I don't want to go through that Russian site again as I got an invalid download. Also, please post the baseband file as a separate download.
jboxer said:
So you got them after the LG Updater extracted the KDZ into its component files. phburks and I didn't get that far as we didn't want to connect our already updated devices to the updater. To get to the point you did where you could grab the individual files you would have had to click the start update button. Good work.
I have 7-zip on my computer but I am unable to open up the file I just downloaded. Can you put it in another format and upload to megaupload or mediafire please? I don't want to go through that Russian site again as I got an invalid download. Also, please post the baseband file as a separate download.
Click to expand...
Click to collapse
I downloaded the 7-zip file to the sdcard on my phone but I won't be home to try opening it for several hours because I'm at seaworld. Lol
Hopefully you guys can get this sorted out. Sounds promising so far.
phburks said:
I downloaded the 7-zip file to the sdcard on my phone but I won't be home to try opening it for several hours because I'm at seaworld. Lol
Hopefully you guys can get this sorted out. Sounds promising so far.
Click to expand...
Click to collapse
I won't be able to look at it until tomorrow as it is 11:31 p.m. here and time to go to bed. :-O ZZZzzzzz
How about posting a mirror???? the site will not let me download.... unless i visit a sponsor and purchase something... lol
i'll try it out and report back
........... Works like a charm
here mirror link
http://www.megaupload.com/?d=C5LBU3DS
What we really need is for someone to tell us how to create the config files for NVFlash so we can flash the baseband only. The new baseband is there and named 'P999_MDM.bin' if I am remembering correctly. No reason to flash an entire ROM when all someone wants is the updated baseband. If we can get the older baseband file also this tool could be used to revert the baseband also, if someone wanted to do that.
web_ninja said:
How about posting a mirror???? the site will not let me download.... unless i visit a sponsor and purchase something... lol
Click to expand...
Click to collapse
You don't have to buy anything. You just click on one sponsor site and it opens a new window. Thirty seconds later it will enable a download link. You need to click download two or three times if I remember correctly. I am at work now. I can mirror it in about ten hours if nobody else has done it yet. I looked at the files briefly and it looks legit.
Is this supposed to have a command interface? Or are you still typing in commands yourself?
I edited a cap!
Changed link to Mediafire
omarsalmin said:
Is this supposed to have a command interface? Or are you still typing in commands yourself?
Click to expand...
Click to collapse
Good question - that is what I am looking for rather then having to mess with the nvflash commands directly.
Update - this setup is similar to Paul's stock ROM recovery setup on modeco.com. As with his, you only have to "Run Flash.bat file and wait for the process". When I could not get off of the LGupdater screen by any other means, I ran this file from his post and it ran flawlessly - but of course I ended up with a 990's device. I tried to get back with other tools and firmware, but was never able to do it.
If this works OK, you would be able to restore your data, apps, or a nandroid and you are back in business.
I spent a week trying to restore my original (and best device as it turns out), so I am not going to fool with this right now myself. I did compare the config files from bot Paul's and this firmware and they are different - which looks real promising, as they are different.
HELP! I tried to use this and the tool failed, now I am getting ZERO response from the device. I can't even boot to APX. I'm freaking out right now!
EDIT: I managed to get the process restarted and the phone is in the process of rebooting. Hoping for the best.
EDIT 2: Phone booted up and it was all restored but for some reason the baseband was not updated :\
Did you run by using the flash.bat file? Did you hold volume up and down for the entire flash process?
Sent from my LG-P999 using Tapatalk
AimanF said:
HELP! I tried to use this and the tool failed, now I am getting ZERO response from the device. I can't even boot to APX. I'm freaking out right now!
EDIT: I managed to get the process restarted and the phone is in the process of rebooting. Hoping for the best.
EDIT 2: Phone booted up and it was all restored but for some reason the baseband was not updated :\
Click to expand...
Click to collapse
Did you have old of new baseband on before flashing? What was the state of your G2X before running this?
UPDATE: It appears that this works - but would like to 100% confirm. After all the disasters that occurred from running the LGupdater tool, this would be an important fix and should be stickied at some point. Current members know of the updater problems, but new buyers and member may not - so many may still have this problem down the road.
Therefore, I believe this is an important enough item to bring to closure and make readily available.
U saved my phone's life
THANK YOU THANK YOU
followed instructions restored completley to stock just like how i got phone out of box 2 weeks ago.
I was running eaglesblood v8 and had altered the vold.fstab file to switch mounts
from sdcard to internal and after that point i rebooted and media scanner said damaged sd card well i figured it just to be like an extension of a permission of sorts. and thought if formated it would the paths would switch no problem.
im actually kind of having a hard time rembering exactly what steps i did take to **** it up royally. but went into clockwork 5 to flash another rom from internal storage or same i cant rember now and did factory reset then all hell broke loose .
couldnt mount nothing except for system i tried formating sd card even though i dont have one probally ended up formating internal lol. formated system,
re flashed all recoverie versions including stock. i was getting so mad i called google HA by the way they got some pretty good music when u have to hold.
only thing i didnt try was to load up a rom on sd card and mount that but i really doubt it would have worked and plus i couldnt even use phone to do it lol
i need to go buy drive saved me some serious cash I would say this should be enough confirmation!!
Related
Here are the files and instructions to get root and CWM on a Samsung Conquer 4G with the FC17 update. To enter Download Mode on the phone, make sure the phone is turned off and plugged into the wall charging. You should also make sure the phone has a good charge on it. Then turn the phone on by pressing the volume down and camera button and holding them while pressing the power button for a few seconds.
Here are the files you will need -
CONQUER-ROOT.zip
Unzip all the files on your computer and follow these steps.
1) Enter download mode on the phone and plug it into your computer. Open up the Odin program. Then press the OPS button and select the SPH-D600_FC17_CWM.ops file. Then press the PDA button and select the SPH-D600_FC17_CWM.tar.md5 file. The press the Start button, the images should install and the phone reboot. Congrats, your phone now has a stock FC17 image with a CWM Recovery.
2) Next, copy the Superuser-3.0.7-efghi-signed.zip and su-bin-3.0.3.2-efghi-signed.zip files to the root of your SD Card after booting up.
3) Once the phone boots up, go into settings, select Applications, then Development, then turn on USB debugging. Now you can restart the phone into recovery mode with adb. If you don't want to use adb, you can plug the phone into the wall and turn it on while holding the volume down and power button. Either way is fine, as long as you now get the phone into recovery mode.
4) The phone should now go into CWM recovery. Go to install zip from sdcard and select the Superuser-3.0.7-efghi-signed.zip file you put on the sdcard and install that. Next select the su-bin-3.0.3.2-efghi-signed.zip file from your sdcard and install that.
5) Congratulations, you now have a rooted phone with the FC17 update. If you had CWM installed before, you can now do an advanced back-up, and just restore the data from your most recent backup and get all your data back.
I've created a new custom ROM here - http://forum.xda-developers.com/showthread.php?p=29369141
You can just download the new files and follow those instructions if you haven't installed this yet.
it work like charm thank you very much sir very good job done..........
---------- Post added at 04:47 AM ---------- Previous post was at 04:38 AM ----------
there is any custom rom kool one ...
I know on the E4GT, sfhub is able to make tar's that do not wipe user data. The file difference between the 2 images are
removed: boot.bin, sbl.bin, param.lfs, cache.img, data.img
intact: recovery.bin, hidden.img, factoryfs.img(largest file) modem.bin and zImage(contains the kernel)
The Question I'm posing to you is which of the files in the conquer tar.md5 might be the counterparts to the above files, making them the ones to strip out in order to make it not wipe data?
My wife never wanted me to root her phone until recently, so no cwm backup that's pre-OTA, and there are some apps that don't work when re-installed (a security key-gen app)
Any help would be much appreciated.
AestenD said:
I know on the E4GT, sfhub is able to make tar's that do not wipe user data. The file difference between the 2 images are
removed: boot.bin, sbl.bin, param.lfs, cache.img, data.img
intact: recovery.bin, hidden.img, factoryfs.img(largest file) modem.bin and zImage(contains the kernel)
The Question I'm posing to you is which of the files in the conquer tar.md5 might be the counterparts to the above files, making them the ones to strip out in order to make it not wipe data?
My wife never wanted me to root her phone until recently, so no cwm backup that's pre-OTA, and there are some apps that don't work when re-installed (a security key-gen app)
Any help would be much appreciated.
Click to expand...
Click to collapse
Take out userdata.yaffs to retain your data, BUT you will have to rebuild the tar file and remake the OPS file by removing the line that reads -
Code:
9,userdata
If you need the Linux commands to rebuild the image, let me know.
brienj said:
Take out userdata.yaffs to retain your data, BUT you will have to rebuild the tar file and remake the OPS file by removing the line that reads -
Code:
9,userdata
If you need the Linux commands to rebuild the image, let me know.
Click to expand...
Click to collapse
Crap, and me with no Linux box lol
I'll figure something out, I have a live CD around here somewhere.
AestenD said:
Crap, and me with no Linux box lol
I'll figure something out, I have a live CD around here somewhere.
Click to expand...
Click to collapse
Just install Cygwin and use that and then extract all the files out of the .md5 file, it's just a regular tar file with md5 sums in it. WinZip, WinRAR, etc. will easily extract the files from it. Then use these commands to rebuild the image without the userdata.yaffs file.
tar -H ustar -c adsp.mbn amss.mbn appsboot.mbn boot.img cache.yaffs mibib osbl recovery.img system.yaffs > package_name.tar
md5sum -t package_name.tar >> package_name.tar
mv package_name.tar package_name.tar.md5
Click to expand...
Click to collapse
You can replace each package_name with whatever you want it called.
brienj said:
Just install Cygwin and use that and then extract all the files out of the .md5 file, it's just a regular tar file with md5 sums in it. WinZip, WinRAR, etc. will easily extract the files from it. Then use these commands to rebuild the image without the userdata.yaffs file.
You can replace each package_name with whatever you want it called.
Click to expand...
Click to collapse
Thanks for your help, took me a bit, because I mistakenly flashed the non-CWM image first, and the bootloader version just wasn't letting me in. Luckily I have a jig for my SGS2, and I'm up and running now. Hopefully just the fact that it's the full image, rather than OTA upgraded will fix some of the issues she's been having. If not, then having root gives me so many more troubleshooting options.
give me an error says the SPH-D600_FC17_CWM.tar.md5 is invalid image type please help
sromero619 said:
give me an error says the SPH-D600_FC17_CWM.tar.md5 is invalid image type please help
Click to expand...
Click to collapse
"known issue" just keep going, it'll work just fine.
Sent from my SPH-D710 using Tapatalk
sromero619 said:
give me an error says the SPH-D600_FC17_CWM.tar.md5 is invalid image type please help
Click to expand...
Click to collapse
It says this, even with an official Sprint Odin image. It will still work, like AestenD mentioned.
i did all the step but when i hit start on the odin it says please connect phones what can else can i do. loaded the drive from super one click because my laptop running windows seven wasn't reading my phone. Its reading my phone I downloaded the usb driver from this link http://r2doesinc.bitsurge.net/leaked/
now when i run odin now it say """an unnamed file was not found""" whats to do please help
brienj said:
It says this, even with an official Sprint Odin image. It will still work, like AestenD mentioned.
Click to expand...
Click to collapse
i got the phone to be read but now when i hit the start button a window pops out says "unnamed file is not found"
It worked for me.
Question
I have been reading up on this phone since I ordered it from my new provider. I should get the phone sometime later today and wanted to get everything ready to root it as soon as I get it. I've read JWhip804's tutorial on how to root the Conquer. I've also been keeping up with chrystal0925's efforts at making a working themed ROM.
My question is, if I want to have a recovery of my stock phone just in case I have to send it back to my carrier, should I use the method described in this thread or use JWhip804's thread?
I have a brand new Samsung Conquer SPHD600BKS on the Sprint network using a new provider to my area called Ting.
Android Version: 2.3.4
Baseband Version: S: D600.12 x.EG15
Kernel Version: 2.6.35.7-perf
Build Number: GINGERBREAD.EG15
Hardware Version: D600.12
Thanks.
roofus1812 said:
I have been reading up on this phone since I ordered it from my new provider. I should get the phone sometime later today and wanted to get everything ready to root it as soon as I get it. I've read JWhip804's tutorial on how to root the Conquer. I've also been keeping up with chrystal0925's efforts at making a working themed ROM.
My question is, if I want to have a recovery of my stock phone just in case I have to send it back to my carrier, should I use the method described in this thread or use JWhip804's thread?
I have a brand new Samsung Conquer SPHD600BKS on the Sprint network using a new provider to my area called Ting.
Android Version: 2.3.4
Baseband Version: S: D600.12 x.EG15
Kernel Version: 2.6.35.7-perf
Build Number: GINGERBREAD.EG15
Hardware Version: D600.12
Thanks.
Click to expand...
Click to collapse
Super-One-Click only works on EC15, and you can not do an OTA update to FC17 with root, and once you do update to FC17, Super-One-Click will no longer work to root your phone, so you must use the method I have made in this thread, or a similar one to it. You MUST get a stock FC17 image with the CWM recovery to push root onto your phone, as the OTA update has recovery updating scripts, etc. in it, and it's just easier to use the FC17 image and not bother with making the OTA able to be rooted. In order to get the phone back to a stock image, you can easily find the stock Odin image that is floating around, or change the recovery image in the Odin file I have in this thread, with a stock recovery image.
Finished
brienj said:
Super-One-Click only works on EC15, and you can not do an OTA update to FC17 with root, and once you do update to FC17, Super-One-Click will no longer work to root your phone, so you must use the method I have made in this thread, or a similar one to it. You MUST get a stock FC17 image with the CWM recovery to push root onto your phone, as the OTA update has recovery updating scripts, etc. in it, and it's just easier to use the FC17 image and not bother with making the OTA able to be rooted. In order to get the phone back to a stock image, you can easily find the stock Odin image that is floating around, or change the recovery image in the Odin file I have in this thread, with a stock recovery image.
Click to expand...
Click to collapse
I just finished backing up my Conquer using this guide. It was really easy. Thanks.
Hi guys. Anyone use tethering with this? I had tethering working on the old rom fine and another unrooted phone with the ota update. I got a replacement phone and tethering does not work. It only works for google sites - with any tethering app i tried. Is it the hardware or maybe its the stock fc17? I tried reflashing and clearing everything and the problem persists.
I tried using Odin today to root my Samsung Conquer and had a bit of trouble. When I attached the .tar file it gave me an error but as I read this thread I just kept going as if there was no issue. About half way through the Odin installation my phone just rebooted, I tried again and it rebooted it the same spot. I tried putting my phone back into download mode and continue the process, which it did, and I got a "Pass" message at the end. But I don't have CWM and I'm almost positive its still not rooted. Any suggestions?
Any chance of an update with the new OTA included?
Sent from my SPH-D710 using xda premium
There is a new ota fe17. Does anyone know if it will break root? Will it install?
Sent from my SPH-D600 using XDA
My infuse when turned on goes to a screen that looks like phone ! pc with the message "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". So this happens even when I try and go to download mode or recovery mode. Basically as soon as I hit the power button. I'm really freaking out. It was rooted and I was doing following this link: http://forum.xda-developers.com/showthread.php?t=1613523
Then the problems started when my computer didn't recognize the phone in download mode. and then it was recognized so I started the Odin flash. Then it froze at cache.rts (I believe that's what Odin said, I can't get to it anymore)...So I uninstalled and reinstalled the drivers and did it again and it got to factoryfs.rfs before it froze there for a really long time. So I unplugged it and tried to do GTG Ultimate Unbrick...but I can't get the .zip file to open. My computer keeps telling me "Can Not Open ____ as archive". I re-downloaded it and same result. Is there anything I can do to save my phone? I'm a real idiot and this kind of stuff always happens to me no matter how much I read up on something and make sure I'm doing it right. I would really appreciate a little help though, thanks!
I actually got it downloaded and followed Rammstein874's video on youtube on how to do it and I am once again stuck on factoryfs.rfs :-(
What can I do at this point? It is still stuck at the Phone-!-PC screen when I try to go to download mode. Please help, I'm starting to get pretty worried about this...
When your screen is phone!computer, that's an alternative version of download mode. You can either use ODIN or heimdall back to stock. Just plug it in via usb, allow odin/heimdall to recognize it and start flashing.
This is correct....if you see those pic on your phone that is a form of download...i would run the one click method...
sfgiants2010 said:
Rammstein874's video on youtube
Click to expand...
Click to collapse
Can you PM me the link to Rammstein874's video? I didn't realize he still had this, and I've since updated my packages and how-to.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
jscott30 said:
Can you PM me the link to Rammstein874's video? I didn't realize he still had this, and I've since updated my packages and how-to.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
Lemma know if that's the one..pm sent...
Sorry I was at work all day.
This is the video link I used: http://www.youtube.com/watch?v=y1HgcZrYR_4
I am also looking at the following one-click method posts:
- http://forum.xda-developers.com/showthread.php?t=1331381
- http://forum.xda-developers.com/showthread.php?t=1524081
* I used the above link (or tried) and it didn't seem to work either. I downloaded Heimdall Suite for Windows 64bit and then installed the drivers and plugged in my phone in download mode. But then I was unable to get it started...I used the "Stock_SGH_I997_UCLB3_Repartition-One-Click.jar" file I found on mediafire (because all of these posts link to mediaupload which is no longer working). Anyway, so I tried to run Heimdall-frontend.exe on windows and once it opened up I connected my phone (nothing turns green like the post says) and hit browse. I chose the jar file aforementioned and it said "tar header contained invalid file size."
So if someone could point me toward a more up to date thread if I'm using the wrong one and kind of explain to me how to get around the other problem I'm having with the jar file then I would be forever appreciative
Not sure what you did...not saying you did something wrong but here is what I do, below are how i perform using qkster's method...
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081
Right, I did those things from that link itself. I think the problem is actually with how I'm using Heimdall. I downloaded the suite version from here: http://www.glassechidna.com.au/products/heimdall/
I also downloaded Microsoft Visual Studio C++. So I feel like it should be working...but the problem comes when I hit browse to attach the jar file you linked to. It says the "tar header file size was incorrect"...so am I doing something wrong in the way that I'm attaching the jar file to go back to stock? Could you or someone else please confirm that process and/or check the jar file for me to make sure it's still up-to-date? Sorry for the trouble, I'm just not sure what I can do at this point if I can't get Heimdall working. I can't flash after I attach the jar file with the error message either, it doesn't recognize my phone when it is attached in download mode (which is coming up just fine now without the phone!pc thing for some reason).
sfgiants2010 said:
Right, I did those things from that link itself. I think the problem is actually with how I'm using Heimdall. I downloaded the suite version from here: http://www.glassechidna.com.au/products/heimdall/
I also downloaded Microsoft Visual Studio C++. So I feel like it should be working...but the problem comes when I hit browse to attach the jar file you linked to. It says the "tar header file size was incorrect"...so am I doing something wrong in the way that I'm attaching the jar file to go back to stock? Could you or someone else please confirm that process and/or check the jar file for me to make sure it's still up-to-date? Sorry for the trouble, I'm just not sure what I can do at this point if I can't get Heimdall working. I can't flash after I attach the jar file with the error message either, it doesn't recognize my phone when it is attached in download mode (which is coming up just fine now without the phone!pc thing for some reason).
Click to expand...
Click to collapse
why are you using these other programs...idk,
I just click on the one click file it an executable design to open and run itself...you say attach the jar file...why the suite version of heimdall...?
did you download the links i provided and just use those...?
sfgiants2010 said:
Right, I did those things from that link itself. I think the problem is actually with how I'm using Heimdall. I downloaded the suite version from here: http://www.glassechidna.com.au/products/heimdall/
I also downloaded Microsoft Visual Studio C++. So I feel like it should be working...but the problem comes when I hit browse to attach the jar file you linked to. It says the "tar header file size was incorrect"...so am I doing something wrong in the way that I'm attaching the jar file to go back to stock? Could you or someone else please confirm that process and/or check the jar file for me to make sure it's still up-to-date? Sorry for the trouble, I'm just not sure what I can do at this point if I can't get Heimdall working. I can't flash after I attach the jar file with the error message either, it doesn't recognize my phone when it is attached in download mode (which is coming up just fine now without the phone!pc thing for some reason).
Click to expand...
Click to collapse
Is your phone still stuck on the phone-!-pc ?
did you read the last post he had regarding the actual heimdall program suite...
not sure what he had going on...I believe he has download mode capability...
thx ''Goshujin-sama'' qkster
Yeah..that's where I wasn't sure what sf was doing.
the jar file is self executable. When you click on the jar file, there is a load up delay.
Then should be be ready.
You then hook up the phone.
I've not seen in tar header file size error.
Sf should not be trying to stick the 1-click file into heimdall front-end.
It's a single self executable jar file..the is no other dependencies...the only other situation I can think of is maybe putting the 1-click jar file onto a different PC and try running it there.
qkster said:
Yeah..that's where I wasn't sure what sf was doing.
the jar file is self executable. When you click on the jar file, there is a load up delay.
Then should be be ready.
You then hook up the phone.
I've not seen in tar header file size error.
Sf should not be trying to stick the 1-click file into heimdall front-end.
It's a single self executable jar file..the is no other dependencies...the only other situation I can think of is maybe putting the 1-click jar file onto a different PC and try running it there.
Click to expand...
Click to collapse
that's when I started to question him on these other programs...due to the one clicker is self sustained as a exe...idk...but believe he log off...i will monitor and holler at you if required thank you...
Oh man I had no idea...I was so mixed up by trying to educate myself with so many posts about using Heimdall. I thought I had to download Heimdall separately and attach the jar file or something. But okay so I ran the one-click. It failed the first time (expected) and then I checked the flash bootloaders box and hit flash again. Then it stopped at installing drivers and prompted me to install the drivers on the following prompt. So I did that and then it said installed drivers successfully and I hit close. Then nothing happens. So what do I do at this point? I'm probably being an idiot again but I really appreciate you guys trying to help me out. And I hope you realize I'm trying my best to not waste anyone's time.
The device status was a green Connected before I started by the way. At this point what I do? It seems to just break at the installing drivers part...?
It should of rebooted it self the phone...
Btw you are not wasting my time...wife is watching cup cake wars...so ....rather help you...lol
sfgiants2010 said:
Oh man I had no idea...I was so mixed up by trying to educate myself with so many posts about using Heimdall. I thought I had to download Heimdall separately and attach the jar file or something. But okay so I ran the one-click. It failed the first time (expected) and then I checked the flash bootloaders box and hit flash again. Then it stopped at installing drivers and prompted me to install the drivers on the following prompt. So I did that and then it said installed drivers successfully and I hit close. Then nothing happens. So what do I do at this point? I'm probably being an idiot again but I really appreciate you guys trying to help me out. And I hope you realize I'm trying my best to not waste anyone's time.
The device status was a green Connected before I started by the way. At this point what I do? It seems to just break at the installing drivers part...?
Click to expand...
Click to collapse
Once the connected bar is on, you click flash. It should complete it's routine. the phone reboots. you should click on the boot loader box. you disconnect. let it finish. set it back into donwload mode and flash again.
you can try different usb port or data cord or different pc
Plus you have my master...qkster here...cuz you lost me on the programs you were using...so i called in the jedia master!
As long as your screen has that Phone! Computer sign, it's not bricked yet. I recommend you to search some how to videos online so you can see the exact instructions on how to use heimdall because it's that easy. If possible maybe one of our awesome contributors can make a how to video for heimdall.
I believe he is tracking now qkster is providing....thx
Hello everyone, I am in need of serious help. I have the Verizon Galaxy S3 4.3 and I have hardbricked the device. The phone is completely unresponsive.
I will attempt to give all the details of how I came to this without boring everyone to death with inane facts. So here goes; I first rooted the phone around November. Used Odin, had ClockworkMod installed and even managed to teach myself (with the help of folks like you all here), how to circumvent Verizon's pesky bootloaders (both unlocked and then relocked). Everything was running smoothly until I had left my phone unattended and plugged into my computer. The Verizon updater forced 4.3 on me leaving me scrambling to figure out to to regain root access. I did manage to gain the root access (although, I'm not 100% sure how so) and once again, everything was fine.
I began using TitaniumBackup to starting removing some bloatware and moving system apps to the SD card. I decided that I had no use for the "Samsung Link" app and I removed it. Once I returned from the reboot, I noticed that the icon for the bootloader was on the screen indicating that it was unlocked. I the did a quick search and app file for the "EZ Unlock" app. I installed the file, ran the program, did and reset and DEAD. Nothing. I've sat at the PC for the better part of the last 24 hours, have read hundreds of posts and tried more methods than I care to count. So far nothing has worked.
I'm desperately hoping that I will be able to find my answers by reaching out to the community as I have no funds to send my phone anywhere and I am past the warranty period. You guys are probably my last hope. Thanks in advance to anyone who helps out. It means a lot.
TwistedPoet said:
Hello everyone, I am in need of serious help. I have the Verizon Galaxy S3 4.3 and I have hardbricked the device. The phone is completely unresponsive.
I will attempt to give all the details of how I came to this without boring everyone to death with inane facts. So here goes; I first rooted the phone around November. Used Odin, had ClockworkMod installed and even managed to teach myself (with the help of folks like you all here), how to circumvent Verizon's pesky bootloaders (both unlocked and then relocked). Everything was running smoothly until I had left my phone unattended and plugged into my computer. The Verizon updater forced 4.3 on me leaving me scrambling to figure out to to regain root access. I did manage to gain the root access (although, I'm not 100% sure how so) and once again, everything was fine.
I began using TitaniumBackup to starting removing some bloatware and moving system apps to the SD card. I decided that I had no use for the "Samsung Link" app and I removed it. Once I returned from the reboot, I noticed that the icon for the bootloader was on the screen indicating that it was unlocked. I the did a quick search and app file for the "EZ Unlock" app. I installed the file, ran the program, did and reset and DEAD. Nothing. I've sat at the PC for the better part of the last 24 hours, have read hundreds of posts and tried more methods than I care to count. So far nothing has worked.
I'm desperately hoping that I will be able to find my answers by reaching out to the community as I have no funds to send my phone anywhere and I am past the warranty period. You guys are probably my last hope. Thanks in advance to anyone who helps out. It means a lot.
Click to expand...
Click to collapse
Ok, Can you boot to Odin mode (dowload mode)?
TwistedPoet said:
Hello everyone, I am in need of serious help. I have the Verizon Galaxy S3 4.3 and I have hardbricked the device. The phone is completely unresponsive.
I will attempt to give all the details of how I came to this without boring everyone to death with inane facts. So here goes; I first rooted the phone around November. Used Odin, had ClockworkMod installed and even managed to teach myself (with the help of folks like you all here), how to circumvent Verizon's pesky bootloaders (both unlocked and then relocked). Everything was running smoothly until I had left my phone unattended and plugged into my computer. The Verizon updater forced 4.3 on me leaving me scrambling to figure out to to regain root access. I did manage to gain the root access (although, I'm not 100% sure how so) and once again, everything was fine.
I began using TitaniumBackup to starting removing some bloatware and moving system apps to the SD card. I decided that I had no use for the "Samsung Link" app and I removed it. Once I returned from the reboot, I noticed that the icon for the bootloader was on the screen indicating that it was unlocked. I the did a quick search and app file for the "EZ Unlock" app. I installed the file, ran the program, did and reset and DEAD. Nothing. I've sat at the PC for the better part of the last 24 hours, have read hundreds of posts and tried more methods than I care to count. So far nothing has worked.
I'm desperately hoping that I will be able to find my answers by reaching out to the community as I have no funds to send my phone anywhere and I am past the warranty period. You guys are probably my last hope. Thanks in advance to anyone who helps out. It means a lot.
Click to expand...
Click to collapse
I doubt you'll bore us here, after all we dwell in the minutiae and tiniest of details for fun. Hmm, from what I see you have a bootloader hard brick since you tried using EZ Unlock. TW 4.3 prevents downgrading the rom to pre-4.3, flashing an unlocked bootloader, and installing a custom recovery using 4.1.2 methods. Your best option will be to try the steps detailed in this bootloader/hardbrick thread by SpyroDazee.
buhohitr said:
Ok, Can you boot to Odin mode (dowload mode)?
Click to expand...
Click to collapse
No. Once I used EZ Unlock, I was bricked.
SlimSnoopOS said:
I doubt you'll bore us here, after all we dwell in the minutiae and tiniest of details for fun. Hmm, from what I see you have a bootloader hard brick since you tried using EZ Unlock. TW 4.3 prevents downgrading the rom to pre-4.3, flashing an unlocked bootloader, and installing a custom recovery using 4.1.2 methods. Your best option will be to try the steps detailed in this bootloader/hardbrick thread by SpyroDazee.
Click to expand...
Click to collapse
I've looked at this particular guide the most. Where I fail there is the post calls to use Win32diskimager with the unzipped debrick.bin. I cant get Win32 to recognize the file and get error code 5: need permission (or something like that) and I run the program in Admin mode.
The only file I've found so far that Win32 does actually write to my SD card is Debrick-i535.img. http://angelfirenetworks.servegame.com/XDA/S3 Debrick IMG_s/
And then I can seem to make that run either.
I also have bricked S3 different circumstances but still hard bricked. Nothing I've tried here on xda or anywhere else has worked. I'm going to try this http://www.ebay.com/itm/281217379767?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 . It is probably the cheapest and easiest way.
TwistedPoet said:
I've looked at this particular guide the most. Where I fail there is the post calls to use Win32diskimager with the unzipped debrick.bin. I cant get Win32 to recognize the file and get error code 5: need permission (or something like that) and I run the program in Admin mode.
The only file I've found so far that Win32 does actually write to my SD card is Debrick-i535.img. http://angelfirenetworks.servegame.com/XDA/S3 Debrick IMG_s/
And then I can seem to make that run either.
Click to expand...
Click to collapse
It usually takes a few tries to get it to work, but if you really can't then you can always send it in for a jtag repair.
Mobile tech videos will do it, and there's someone on eBay who will do it for $30. Not too expensive.
Sent from my SCH-I535 using Tapatalk 2
TwistedPoet said:
I've looked at this particular guide the most. Where I fail there is the post calls to use Win32diskimager with the unzipped debrick.bin. I cant get Win32 to recognize the file and get error code 5: need permission (or something like that) and I run the program in Admin mode.
The only file I've found so far that Win32 does actually write to my SD card is Debrick-i535.img.
And then I can seem to make that run either.
Click to expand...
Click to collapse
So I just downloaded the debrick.zip and Win32 program from my link onto my laptop. I saved the unzipped debrick folder onto my desktop and found the debrick.bin once I switched the "Files of type" to "." then I just wrote the debrick.bin to a 512 mb sdcard with no problems. I'm not going any further cuz I have no need for this though. Are you saying that Win32 doesn't find the bin file at all?
Edit: I just ran it again and it worked a second time. My backup laptop is a 2006ish (maybe older) with a very outdated version of Windows and my sdcard has been unused since 2008. I don't know what else to tell you but it worked surprisingly well for me.
SlimSnoopOS said:
So I just downloaded the debrick.zip and Win32 program from my link onto my laptop. I saved the unzipped debrick folder onto my desktop and found the debrick.bin once I switched the "Files of type" to "." then I just wrote the debrick.bin to a 512 mb sdcard with no problems. I'm not going any further cuz I have no need for this though. Are you saying that Win32 doesn't find the bin file at all?
Edit: I just ran it again and it worked a second time. My backup laptop is a 2006ish (maybe older) with a very outdated version of Windows and my sdcard has been unused since 2008. I don't know what else to tell you but it worked surprisingly well for me.
Click to expand...
Click to collapse
The Win32 program finds the debrick.bin file when I switch to "." as well. But when I click WRITE, I get an error message and the file doesnt't write to the sd card. I'm using a HP Windows 7 Pro (2009) and I have a 32gb, class 10 sd card. I will run it again to double check.
Follow Up: I figured out what I was doing wrong. I was attempting to pull the "bin" file through Win32 and should have been pulling the "zip" file instead. I was able to write the debrick.zip file onto my SD card but wasn't (on first attempt) able to load my phone. Are there any other steps I may have misunderstood or overlooked?
TwistedPoet said:
The Win32 program finds the debrick.bin file when I switch to "." as well. But when I click WRITE, I get an error message and the file doesnt't write to the sd card. I'm using a HP Windows 7 Pro (2009) and I have a 32gb, class 10 sd card. I will run it again to double check.
Click to expand...
Click to collapse
Have you tried formatting the sdcard and running the program again? Set it to Fat32. I'm thinking it may be the sdcard and not the program itself but I'm not certain.
SlimSnoopOS said:
Have you tried formatting the sdcard and running the program again? Set it to Fat32. I'm thinking it may be the sdcard and not the program itself but I'm not certain.
Click to expand...
Click to collapse
VICTORY!!!!!!! - I made several mistakes in getting to this point but i have successfully retrieved my phone from it's previous HardBrick status. The steps it took me to get to this point were, make sure the sd card is formatted (FAT32) and empty, unzip the debrick.zip file, run the Win32 program, select the unzipped debrick.bin file and upload it to the F drive, then click Write. So, more or less, exactly what the instructions told me to do. Sometimes, it's the simple things that we're most often missing or not understanding.
THANK YOU to everyone and especially SlimSnoopOS for talking me through it and SpyroDazee for making such a comprehensive guide to work with. (although, it's simplicity was too complex for me. ).
TwistedPoet said:
VICTORY!!!!!!! - I made several mistakes in getting to this point but i have successfully retrieved my phone from it's previous HardBrick status. The steps it took me to get to this point were, make sure the sd card is formatted (FAT32) and empty, unzip the debrick.zip file, run the Win32 program, select the unzipped debrick.bin file and upload it to the F drive, then click Write. So, more or less, exactly what the instructions told me to do. Sometimes, it's the simple things that we're most often missing or not understanding.
THANK YOU to everyone and especially SlimSnoopOS for talking me through it and SpyroDazee for making such a comprehensive guide to work with. (although, it's simplicity was too complex for me. ).
Click to expand...
Click to collapse
Haha I love the enthusiasm my friend! Great way to start the weekend! All it took was another perspective, it's all good. You are most definitely welcome.
Edit: and while I'm here, if you have any inquiries about TW 4.3 or want to read up on some info then here's our TW 4.3 discussion thread:
http://forum.xda-developers.com/showthread.php?t=2575661
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Haha I love the enthusiasm my friend! Great way to start the weekend! All it took was another perspective, it's all good. You are most definitely welcome.
Edit: and while I'm here, if you have any inquiries about TW 4.3 or want to read up on some info then here's our TW 4.3 discussion thread:
http://forum.xda-developers.com/showthread.php?t=2575661
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
I'm not turning away knowledge. I'm still very new to this and obviously have a hard time following directions. I was looking at the next steps on that guide and am all ready confused enough to not do anything yet.
What is your phone doing after you inserted your sdcard and what size card and class were they. If you got it to go into download mode or some call it Odin mode by pressing volume down, home button and power button then your off to a great start to bringing your phone back from the dead. If only it worked for mine
Where did you get the debrick.zip file? Every time I download the file it comes as debrick.img not a .zip
Always_Jonezen said:
What is your phone doing after you inserted your sdcard and what size card and class were they. If you got it to go into download mode or some call it Odin mode by pressing volume down, home button and power button then your off to a great start to bringing your phone back from the dead. If only it worked for mine
Where did you get the debrick.zip file? Every time I download the file it comes as debrick.img not a .zip
Click to expand...
Click to collapse
Edit: My SD Card is a 32gb class 10. Once I got Win32 to extract the file properly, I put the SD card back into the phone, put the battery in, and plugged phone into computer. Pushed the power button and the phone came back on.
When you go to download that file with Win32, change the file type to "." - then you'll be able to select the debrick.zip
All files were obtained here - http://forum.xda-developers.com/showthread.php?t=2581166
I hope that helps.
TwistedPoet;49543890. Edit: My SD Card is a 32gb class 10. Once I got Win32 to extract the file properly said:
http://forum.xda-developers.com/showthread.php?t=2581166[/url]
I hope that helps.
Click to expand...
Click to collapse
Thanks I hope it works too. Am I supposed to change the file type of the debrick.img to debrick. and or change the file type in win32
Always_Jonezen said:
Thanks I hope it works too. Am I supposed to change the file type of the debrick.img to debrick. and or change the file type in win32
Click to expand...
Click to collapse
They did exactly what I posted, which was: unzip the debrick.zip, open Win32 and change the file type to ".", find the unzipped debrick folder and select the debrick.bin, and write to the sdcard.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
They did exactly what I posted, which was: unzip the debrick.zip, open Win32 and change the file type to ".", find the unzipped debrick folder and select the debrick.bin, and write to the sdcard.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
As stated earlier when I download the debrick file it downloads as debrick.img not a zip file am I missing something
Always_Jonezen said:
As stated earlier when I download the debrick file it downloads as debrick.img not a zip file am I missing something
Click to expand...
Click to collapse
Did you brick BEFORE 4.3? I hovered over this link in SpyroDazee's post: "Debrick if you bricked before 4.3 OTA" and that's the only one that would download as an IMG. Press "Debrick if you took the 4.3 OTA" and it will download as a zip.
Or change the browser that you're using. I downloaded it using Chrome on my MBP.
Sent from my SCH-I535 using Tapatalk 4
I did brick on 4.1.2 and I am using chrome as my default browser
so after looking for 3-4 hours i'm convinced that almost all the links for files related to the SK4G are expired/down/DL limit reached. i had to wipe my HDD and can't find my backup anywhere!?!? if anyone has the stock firmwares (any and all) could you pretty pretty please send them to me? i'm stuck in a buggy version of glorious overdose and just need my phone to work right again. respond for e-mail or just post ***NEW*** link in this thread.
P.S. so when the mods say "wrong thread" or "duplicate" i looked i searched and found nothing newer than 2013 so i started a fresh one......... that and i just signed up and it keep telling me "NO" in what seemed like the correct forum.
P.S.S i'm assuming there's legal reasons but whats up with a file repository on or at least paired with XDA to hold all the files posted here. shooting in the dark but maybe Kimdotcom will provide a mega account to serve as a repo?!?!?!?
I have the One-Click KG2 ODIN Java app that may be able to restore your SK to t839-Sidekick4G-UVKG2. Here's the README:
If you brick your phone, well you're lucky because it can't get any easier to fix. This is pretty much a one-click version of ODIN that is OPERABLE AND EXECUTABLE on ANY operating system that has Java installed. Self-explanatory, but if you don't have Java installed yet, you probably should go get it installed now.
(Credits go to Ayoteddy for the following post) :
To get into download mode (if you can't) pull the battery out of your phone, the USB cord (if connected), the SIM card, and the SDCard. Now...in a position where your one hand is able to access the Trackball and - volume key, hold them both at the same time and with your other free hand, insert the battery, after a second or two, you should see an Android on screen with a logo saying DOWNLOADING..you're ready to advance.
After you install Java, double-click the .jar file in this folder.
Hit "flash" and if all is well, it'll work without any hassles and you'll be back to the stock ROM like the day you got your Sidekick (factory reset).
If it says driver was not found, a window will popup with an administrative prompt if you are running Windows 7, allow it to run.
On the new Zadig window, go to Options>List all devices.
You should now see SAMSUNG COMPOSITE DRIVER, make sure the box to the immediate right says WinUSB and then hit the install button.
You should be on stock after performing these steps...if not and YOUR MODEM fails to upload, check "Flash Bootloaders" and the modem should flash just fine and you'll be back on stock ROM soon enough.
Thanks to AdamOutler for Heimdall!
His thread is here if you want to thank him properly!
http://forum.xda-developers.com/showthread.php?t=1350060
I also have Odin3+v1.61 with sk4g pit. Let me know if you want me to upload these.
marathonjon said:
I have the One-Click KG2 ODIN Java app that may be able to restore your SK to t839-Sidekick4G-UVKG2. Here's the README:
I also have Odin3+v1.61 with sk4g pit. Let me know if you want me to upload these.
Click to expand...
Click to collapse
Please re-upload these to sammobile.com, samsung-firmware.org, MEGA, Android File Host, or similar where the files can live on longer.
Sorry, I got rid of my SK a couple years ago and all the files that went with it.
marathonjon said:
Sorry, I got rid of my SK a couple years ago and all the files that went with it.
Click to expand...
Click to collapse
Is there anyone out there that still has this? Please re-upload.
I managed to pull some files together including the .pit file from my now working tablet and make a fully working 4 file firmware and combo (all in one) firmware that CAN be flashed with Odin. I have tested it on my device and it does work. Since I know people are searching EVERYWHERE for this, I have released a download link for these files below.
Please, feel free to re-post this anywhere, just be sure to credit me.
DISCLAIMER (Obviously): I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE AFTER FLASHING. KEEP IN MIND THAT ANYTHING CAN GO WRONG, EVEN IF YOU'RE FLASHING FIRMWARE THAT IS MADE FOR YOUR DEVICE. THE FIRMWARE AVAILABLE BELOW HAS NOT BEEN MODIFIED, ENGINEERED, OR EDITED IN ANY WAY TO CHANGE THE FUNCTIONALITY OF YOUR DEVICE. IF YOUR DEVICE BRICKS AFTER FLASHING, IT'S ALL ON YOU.
Flashing instructions:
But first, the requirements:
1) SM-T337A, Obviously, but seriously, I can't stress how important it is that you check that your model number is matched with the model number in this thread before flashing anything.
2) A Windows pc (NOT A VIRTUAL MACHINE! Using a VM to flash your device has a high chance to hard-brick your tab, and make sure your computer is running Windows XP or newer.)
3) Your device's USB transfer/charging cable
4) A Brain (Obviously)
Now then, the actual steps (4 File Firmware):
1) Boot your tab into download mode (Shut the device down completely, then hold down the power, volume down, and home button at the same time until a warning message appears)
2) Download and open Odin on your pc
3) Grab the USB charging cable and plug your tab into your pc
4) If Odin does not show your device in the list (It will display an "Added" message if the device is detected) download the Samsung USB Drivers for Mobile Phones and install it to your pc. You may need to/and it is recommended to restart your computer after installing the drivers.
5) Extract the zip file you downloaded containing the firmware to your desktop or a memorable place on your computer.
6) If you wish to wipe your data and start from scratch, click on the 'PIT' tab and select the .pit file in the extracted folder. Then, click the 'OPTIONS' tab and select 'Re-Partition' and 'NAND Erase All'.
7) Insert the firmware files into Odin. Within Odin, for instance, Click on the 'BL' button, which is where the bootloader file goes. Select the extracted package that has 'BL' at the beginning, and vice versa.
Example:
BL: *directory*/BL_T337AUCU2BOH4...
AP: *directory*/AP_T337AUCU2BOH4...
CP: *directory*/CP_T337AUCU2BOH4...
CSC: *directory*/CSC_ ATT_T337AUCU2BOH4...
8) Once done, verify that you have correctly done all the steps above, click 'Start' in Odin and wait for Odin to output a "PASS" message before unplugging anything.
9) If you wish to flash the firmware, but keep your data, make sure that there is no .pit file in Odin, make sure that 'Re-Partition' and 'NAND Erase All' are unchecked, and make sure that there is no file inserted under the 'CSC' row.
Tutorial (Combo Firmware)
1) Boot your tab into download mode (Shut the device down completely, then hold down the power, volume down, and home button at the same time until a warning message appears)
2) Download and open Odin on your pc
3) Grab the USB charging cable and plug your tab into your pc
4) If Odin does not show your device in the list (It will display an "Added" message if the device is detected) download the Samsung USB Drivers for Mobile Phones and install it to your pc. You may need to/and it is recommended to restart your computer after installing the drivers.
5) Extract the zip file you downloaded containing the firmware to your desktop or a memorable place on your computer.
6) Within Odin, Select 'AP' and browse to the directory where you extracted the firmware, and select the .tar package in the directory. There should be nothing else under the other tabs, only 'AP' should have a firmware package in it.
7) Flashing this package (unless you perform the "Developers Tip" at the end of this thread) will wipe all of your data, so be sure that the proper .pit file that came with the firmware package is selected under the 'PIT' tab in Odin and make sure that 'Re-Partition' and 'NAND Erase All' are checked in Odin to ensure a complete wipe of all personal data on the device. If you perform the developers tip at the end of the thread, simply insert the new package you created under 'AP', make sure there is no .pit file under the PIT slot, and make sure that 'Re-Partition' and 'NAND Erase All' are unchecked in Odin.
8) Once done, verify that everything is set and ready-to-go, then click 'Start' and wait for Odin to output a "PASS" message before unplugging anything.
9) Enjoy!
WARNING: If you are seeing sites that charge you money for the files, DO NOT BUY IT. They are scams and I HIGHLY SUGGEST AVOIDING THESE SITES. I didn't have to buy anything. If you do buy the firmware from these scam sites, and your device becomes bricked or messed up in some way, don't say I didn't warn you.
4 File Firmware Download: https://mega.nz/#!n8Q3VIIS!OComhygeI5SL5R6n0EXEfiYMBtVn_aOAIcUuLgmYs-k
Combo Firmware Download: https://mega.nz/#!69oEwbBR!vBtHQnrdwAfdZB3iPeGb99Yp7W79efTQr7t6FZXrzIo
Odin 3.12 Download: https://mega.nz/#!KsZiHKTb!aEHdQgO7JAQeUwdJWqS0xoR3lyJH4ieJ6qTbVKce8Zk
If the link doesn't work or goes down for some reason or if you were confused by my instructions in any way, please let me know.
Developers Tip: If you want to flash firmware without wiping your data, make sure there is no pit file selected under the PIT tab in Odin, then extract your firmware package (extract everything into a separate folder for combo firmware, extract the CSC package for 4 file downloads) and remove cache.img.ext4 then repack as a .tar file. Applies to both combo and 4 file firmware packages. In 4 file packages, cache.img.ext4 is in the CSC file. However, in some cases this may put your device in a bootloop. If you wish to do this on an older device and the cache file doesn't have the .ext4 extension at the end, don't worry, it'll work the same way.
Now that you have the firmware, WHY NOT ROOT IT? Check out my thread on how to do so here: https://forum.xda-developers.com/tab-4/general/root-how-to-root-sm-t337a-supersu-t3553848
Cheers!
Does anyone know the process for extracting the files like this from an OTA update? I have some files I would like to extract from another OTA. Thank you
Sent from my SAMSUNG-SM-N910A using XDA-Developers Legacy app
dkmac said:
Does anyone know the process for extracting the files like this from an OTA update? I have some files I would like to extract from another OTA. Thank you
Sent from my SAMSUNG-SM-N910A using XDA-Developers Legacy app
Click to expand...
Click to collapse
I'll be honest and say its not easy. Making this firmware took me about 3 months. OTA update files are very different from actual Odin firmware files. If you want to extract the files from an OTA update, I just used 7Zip and went from there.
Lollipop 5.1.1 Root for SM-T337A
@KingOfTheNet - Great stuff. There are definitely some shady sites out there offering firmware for the T337A so thank you.
Not to be greedy but any recommendations on rooting 5.1.1 on SM-T337A. I am trying to remove all of the Samsung and AT&T bloatware and get my Tab 4 running lean and mean. I am pretty sure I went with your firmware - my build number is listed as LMY47X.T337AUC2BOH4.
Appreciate the support.
18Echo said:
@KingOfTheNet - Great stuff. There are definitely some shady sites out there offering firmware for the T337A so thank you.
Not to be greedy but any recommendations on rooting 5.1.1 on SM-T337A. I am trying to remove all of the Samsung and AT&T bloatware and get my Tab 4 running lean and mean. I am pretty sure I went with your firmware - my build number is listed as LMY47X.T337AUC2BOH4.
Appreciate the support.
Click to expand...
Click to collapse
Your welcome bro, happy to help! I have actually rooted my tab with SuperSU, fully working. The only thing is its temporary, and I avoid rebooting or shutting the device down at all because it's a system-less SuperSU (meaning temporary). I'll make a thread on how to achieve root on this tab later tomorrow when I get home from work, unless someone replies to this before I do (It's late where I'm at).
Cheers!
18Echo said:
@KingOfTheNet - Great stuff. There are definitely some shady sites out there offering firmware for the T337A so thank you.
Not to be greedy but any recommendations on rooting 5.1.1 on SM-T337A. I am trying to remove all of the Samsung and AT&T bloatware and get my Tab 4 running lean and mean. I am pretty sure I went with your firmware - my build number is listed as LMY47X.T337AUC2BOH4.
Appreciate the support.
Click to expand...
Click to collapse
Just made a thread for it here: https://forum.xda-developers.com/tab-4/general/root-how-to-root-sm-t337a-supersu-t3553848
Cheers!
Hello! ... First of all, thank you for all your hard work! But unfortunately that firmware does not seem to work for me. I'm a little newbie, so I'd appreciate if someone could explain the steps to follow specifically with Odin, as a tutorial or something ... so that I can distinguish what I'm doing wrong.
I uploaded a short video so you can see what I mean... If you could take the time to watch it and tell me what I'm doing wrong, that would be awesome.
Here it is: youtu.be/9JsLVJ-xHMA (I cannot post direct link since I'm new user)
I've downloaded some files with name ATT_T337AUCU2BOH4_T337AATT2BOH4.zip (1.19gb) put by poorusernamebychoice and their tar.md5 file is gone 404.
Now i need some help here, this zip contains:
AP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
BL_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CSC_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
MILLETLTE_USA_ATT.pit
This is big file so now I'm stuck what to do or i start a fresh download from above links.
Sent from my SAMSUNG-SM-T337A using Tapatalk
darkcrazy75 said:
Hello! ... First of all, thank you for all your hard work! But unfortunately that firmware does not seem to work for me. I'm a little newbie, so I'd appreciate if someone could explain the steps to follow specifically with Odin, as a tutorial or something ... so that I can distinguish what I'm doing wrong.
I uploaded a short video so you can see what I mean... If you could take the time to watch it and tell me what I'm doing wrong, that would be awesome.
Here it is: youtu.be/9JsLVJ-xHMA (I cannot post direct link since I'm new user)
Click to expand...
Click to collapse
Sorry for the late responce, my internet has been down for a while now (2 weeks). I'll watch the video later today and edit this post with an explainatio n.
_SAM11_ said:
I've downloaded some files with name ATT_T337AUCU2BOH4_T337AATT2BOH4.zip (1.19gb) put by poorusernamebychoice and their tar.md5 file is gone 404.
Now i need some help here, this zip contains:
AP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
BL_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CSC_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
MILLETLTE_USA_ATT.pit
This is big file so now I'm stuck what to do or i start a fresh download from above links.
Click to expand...
Click to collapse
Do you mean you need to re-download the files or you need help with flashing them? Dl links are at the middle of the thread.
KingOfTheNet said:
Do you mean you need to re-download the files or you need help with flashing them? Dl links are at the middle of the thread.
Click to expand...
Click to collapse
I hve these files i wrote above. So if they're working, i just need procedure
Sent from my SAMSUNG-SM-T337A using Tapatalk
_SAM11_ said:
I hve these files i wrote above. So if they're working, i just need procedure
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
It's actually very easy, that's why I didn't put any instructions in the thread, I just assumed people knew how to do it by now. But I'm happy to provide instructions to those people who don't know how. Instead of posting said instructions right here, I'll update the thread with instructions.
Cheers!
KingOfTheNet said:
It's actually very easy, that's why I didn't put any instructions in the thread, I just assumed people knew how to do it by now. But I'm happy to provide instructions to those people who don't know how. Instead of posting said instructions right here, I'll update the thread with instructions.
Cheers!
Click to expand...
Click to collapse
That means alot after my last reply, i had been trying to flash with odin but i dnt kno why tablet isn't connecting laptop while other phones are. Not evn on media mode. So I'm downloading ota update.zip
Sent from my SAMSUNG-SM-T337A using Tapatalk
_SAM11_ said:
That means alot after my last reply, i had been trying to flash with odin but i dnt kno why tablet isn't connecting laptop while other phones are. Not evn on media mode. So I'm downloading ota update.zip
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
This might take me a while, I can't edit the thread (kinda odd). I've gotta talk to admin about it but I'll try to get instructions up for ya asap (unless someone replies to you with instructions before I do).
Update: I managed updating to 5.1.1 update. Now i just need January update and root the device. I just need January zip update ota if u can manage me getting that please
Sent from my SAMSUNG-SM-T337A using Tapatalk
_SAM11_ said:
Update: I managed updating to 5.1.1 update. Now i just need January update and root the device. I just need January zip update ota if u can manage me getting that please
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
I believe I have the file stored somewhere on my hard drive, I'll look and pm you a link if I can find it.
Cheers!
KingOfTheNet said:
I believe I have the file stored somewhere on my hard drive, I'll look and pm you a link if I can find it.
Cheers!
Click to expand...
Click to collapse
Sure Thanks for much help
Sent from my SAMSUNG-SM-T337A using Tapatalk
Guys no lollipop update for tab4 t230 ?
tab4map4 said:
Guys no lollipop update for tab4 t230 ?
Click to expand...
Click to collapse
No, this thread is for the Tab 4 8.0 AT&T. Please make sure you consult the relevant forums for your device model as doing anything meant to be done on different devices can be catastrophic.
Cheers!
_SAM11_ said:
Sure Thanks for much help
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
Finally got the instructions up. You can check the very beginning of the thread for instructions on flashing. Just remember, I will not be held responsible if your device is bricked after the matter.
Cheers!