Database Info

[Q] Stuck on Splash Screen, adb and fastboot not responding

HTC z710a
Unlocked with S-On
hboot 1-27.0000 pyramid
android 4.0.3
ROM version 3.32.666.53
Unknown Radio
rooted with superuser
I tried to install SmartDroidBerserk 2.2 for my htc sensation tonight. After following the instructions on your website http(removeThis://)smartdroidromsDOTcom/berserk.htm I ran into a huge problem; I'm stuck on the HTC splash screen.
I followed the instructions up to where it said to flash the rom. I believe that I misread this part as meaning that you could install the rom from the zip on the sd card, so I tried to do so. I got an installation error with a status 1 message during the installation. I thought that if I tried to reboot my phone that I could try to reinstall the rom or revert back to an old backup through recovery and then try to actually flash the rom the 'proper' way.
I'm now stuck on the HTC splash screen and can't do anything with my smartphone. I tried to connect it to my computer to run adb to get it back into the bootloader. When I try adb devices it doesn't even recognize that my phone is attached. The same goes for fastboot devices - no return. When I go to my computer and try and select my phone as a removable disk, windows asks me to insert a disk into the disk drive because I formatted the phone during your installation process. After I discovered that I can't use adb to get back into the bootloader, I tried to press volume down and power at the same time but I still can't get into the bootloader with that method, it just stalls on the htc splash screen, not even displaying the "quietly brillant" slogan.
If there's anything that anyone can think that would help my situation, I'd be extremely grateful! I've got a 600$ brick!!

tehwarden said:
I tried to install SmartDroidBerserk 2.2 for my htc sensation tonight. After following the instructions on your website http(removeThis://)smartdroidromsDOTcom/berserk.htm I ran into a huge problem; I'm stuck on the HTC splash screen.
I followed the instructions up to where it said to flash the rom. I believe that I misread this part as meaning that you could install the rom from the zip on the sd card, so I tried to do so. I got an installation error with a status 1 message during the installation. I thought that if I tried to reboot my phone that I could try to reinstall the rom or revert back to an old backup through recovery and then try to actually flash the rom the 'proper' way.
I'm now stuck on the HTC splash screen and can't do anything with my smartphone. I tried to connect it to my computer to run adb to get it back into the bootloader. When I try adb devices it doesn't even recognize that my phone is attached. The same goes for fastboot devices - no return. When I go to my computer and try and select my phone as a removable disk, windows asks me to insert a disk into the disk drive because I formatted the phone during your installation process. After I discovered that I can't use adb to get back into the bootloader, I tried to press volume down and power at the same time but I still can't get into the bootloader with that method, it just stalls on the htc splash screen, not even displaying the "quietly brillant" slogan.
If there's anything that anyone can think that would help my situation, I'd be extremely grateful! I've got a 600$ brick!!
Click to expand...
Click to collapse
if doesn't someone else come with other solution try to use the unbricking project
http://forum.xda-developers.com/showthread.php?p=23078349
edit: pull out your battery,put it again and then hold power button+volume down together
hold until it shows you the bootloader

tlyVisa dutch
rzr86 said:
if doesn't someone else come with other solution try to use the unbricking project
http://forum.xda-developers.com/showthread.php?p=23078349
edit: pull out your battery,put it again and then hold power button+volume down together
hold until it shows you the bootloader
Click to expand...
Click to collapse
I was able to get into the bootloader by holding down Vol + power (guess I wasn't holding it down long enough). When I get into the bootloader and try to go into recovery my phone still gets stuck on the htc splash screen for some odd reason. I was able to get it to go into recovery without a problem (until now of course). I'm not able to get into recovery to restore my backup(s).
Unlocked (with htc dev)
Pyramid PVT Ship S-On RL
HBOOT 1.27.0000
eMMC-boot
I'm reading over the unbricking project now and I'll try it tonight....this so sucks the big one (and hard).....

tehwarden said:
I was able to get into the bootloader by holding down Vol + power (guess I wasn't holding it down long enough). When I get into the bootloader and try to go into recovery my phone still gets stuck on the htc splash screen for some odd reason. I was able to get it to go into recovery without a problem (until now of course). I'm not able to get into recovery to restore my backup(s).
Unlocked (with htc dev)
Pyramid PVT Ship S-On RL
HBOOT 1.27.0000
eMMC-boot
I'm reading over the unbricking project now and I'll try it tonight....this so sucks the big one (and hard).....
Click to expand...
Click to collapse
at least you managed to enter into the bootloader.then your device it is not bricked
there is no need to use it
see then here
http://forum.xda-developers.com/showthread.php?t=1631861
about adb and fasboot commands did you open the command window in the folder where adb and fastboot files are?

rzr86 said:
at least you managed to enter into the bootloader.then your device it is not bricked
there is no need to use it
see then here
http://forum.xda-developers.com/showthread.php?t=1631861
about adb and fasboot commands did you open the command window in the folder where adb and fastboot files are?
Click to expand...
Click to collapse
yes, I put adb and fastboot in a folder C:\mini-adb and navigated to that folder. adb would print out 'attached devices are' and nothing below it when I would run adb devices. fastboot devices simply returned nothing.
I got to the second step part 9 where it asked me to fastboot reboot after flashing the recovery (which was successfully written) however when I try to reboot it just stays stuck on the htc splash screen still.

Sorry for the double post.. I just removed my battery and was able to go back into the bootloader and could get into recovery. I was able to restore a prior rooted backup but whenever I try to reboot my smartphone it loads into recovery and not into my rom.
I have the added problem of not being able to access the sd card where I would put the Android Revolution .zip file. Whenever I try to access the phone's drive windows ask me to please insert a disk into removable disk F:.
EDIT: I just used the rom in the opening post instead of using the Android Revolution rom and it installed just fine. I can use my phone again! Thanks so much rzr!

tehwarden said:
Sorry for the double post.. I just removed my battery and was able to go back into the bootloader and could get into recovery. I was able to restore a prior rooted backup but whenever I try to reboot my smartphone it loads into recovery and not into my rom.
I have the added problem of not being able to access the sd card where I would put the Android Revolution .zip file. Whenever I try to access the phone's drive windows ask me to please insert a disk into removable disk F:.
EDIT: I just used the rom in the opening post instead of using the Android Revolution rom and it installed just fine. I can use my phone again! Thanks so much rzr!
Click to expand...
Click to collapse
haha i was about to tell you now try flashing the rom to see if it will work but you already did it
happy for you man:good:
and you can always hit the thanks button if i really helped you somehow

Inspire 4g MAJOR Problem !

I am SO Freaking lost..... My problem is my phone will freez at the HTC splash screen, and the only things I can get into is bootloader and 4ext recovery. I can't flash any images they don't want to be flashed with the PD98img.zip I can't do anyting my phone is empty with no android os.. I am stuck. I can't seem to do much with fastboot with images either.

AlphaOmegaPrimus said:
I am SO Freaking lost..... My problem is my phone will freez at the HTC splash screen, and the only things I can get into is bootloader and 4ext recovery. I can't flash any images they don't want to be flashed with the PD98img.zip I can't do anyting my phone is empty with no android os.. I am stuck. I can't seem to do much with fastboot with images either.
Click to expand...
Click to collapse
can you give some background as what you did to get the phone into this state?

http://forum.xda-developers.com/showthread.php?t=1208507 I tried this to restore my phone thinking it would fix all my problems instead I must have messed something up, and now i'm pretty sure my phone is a paper weight. I managed to run fastboot oem rebootRUU and installed htc_inspire4g_att_RUU_3.20.502.52_US.exe but it hangs at white screen with HTC logo.

Did you try both flash packages?
Sent from my SAMSUNG-SGH-I527 using XDA Premium 4 mobile app

jzsidebott said:
Did you try both flash packages?
Sent from my SAMSUNG-SGH-I527 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm a NOOB, I have no idea what you mean by that. Sorry

AlphaOmegaPrimus said:
I'm a NOOB, I have no idea what you mean by that. Sorry
Click to expand...
Click to collapse
In the link you provided, on the first page, there were two seperate downloads, depending on when the phone was developed. "Download (restores to official Froyo 2.2.2) (315MB)" and also "Download (restores to official Gingerbread 2.3.3) (309MB)". Was just wondering which one you tried if any at all.

The only thing I can boot into is the 4ext Recovery Touch & hboot Can someone send me stock inspire 4g rom 4ext backup files they are *.tar files [email protected] Or [email protected]
Would that restore my system ?
the phone is
*** Unlocked ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0030
MICROP-0438
RADIO-26.17.14.11_M
eMMC-boot
If this helps
The 4ext Touch Recovery says under info
system ext3 549.2mb 504.9 free
data ext3 1.1gb 1.0 free
cache ext3 140.4mb 127.6 free
sdcard fat32 1.9gb 1.9 free

http://forum.xda-developers.com/showthread.php?t=1208507
4.Reboot to HBOOT: Shutdown completely (disconnect USB if connected and pull battery if necessary) then while holding down the VOL-DOWN key, press the POWER key for about half a second. The phone should boot into HBOOT, check the PD98IMG.zip for consistency, then prompt you to install. Select VOL-UP to install.
5.Once installed, HBOOT will prompt you to reboot by pressing the POWER button. Do this
I can get to step 4 and instead of flashing the PD98IMG.zip is says parsing and just goes back to hboot. I can't flash anything.

I have been making some MAJOR progress on my phone.. after messing around with a lot of fastboot commands, I found this with helped .. fastboot -c "lge.kcal=0|0|0|x" boot customrecovery.img if forces some images to boot.
Also the link I posted above only will work if my phone is relocked. I can't even make post in the Inspire 4G Android Development , because i'm "too new " to ask a question. But I managed to get his program to run again and I've noticed something. on step 7
7.Once successfully completed, the phone will automatically reboot to HBOOT and begin the process of installing the RUU. The only thing you have to do at this point is acknowledge the prompt to install by pressing VOL-UP. (Note: the RUU install may skip a couple of images during the install but this is normal.
IT FAILS to copy the RUU to the sdcard. and that's what has left my phone without an OS. I've also got the stock RUU htc_inspire4g_att_RUU_3.20.502.52_US.exe to run and complete But my phone hangs after the HTC logo..
So i'm headed in the right direction. Any ideas ???? ~ T

SO I've made a HUGE step in progress yesterday, I installed JellyTime rom and inspire mod and gapps. and forced the boot.img file to boot using fastboot -c "lge.kcal=0|0|0|x" boot boot.img it made the boot.img to run and start JellyTime. I've got android installed on the phone now. The only problem is I need to S-OFF so I can fastboot flash boot boot.img. It won't do it right now, As of now the phone will bootup and hang on the White HTC logo screen, Every attempt to S-OFF the phone has failed so far. Any Ideas ?

Your phone is bricked?
Try flashing this ROM
http://forum.xda-developers.com/showthread.php?t=996368

AlphaOmegaPrimus said:
SO I've made a HUGE step in progress yesterday, I installed JellyTime rom and inspire mod and gapps. and forced the boot.img file to boot using fastboot -c "lge.kcal=0|0|0|x" boot boot.img it made the boot.img to run and start JellyTime. I've got android installed on the phone now. The only problem is I need to S-OFF so I can fastboot flash boot boot.img. It won't do it right now, As of now the phone will bootup and hang on the White HTC logo screen, Every attempt to S-OFF the phone has failed so far. Any Ideas ?
Click to expand...
Click to collapse
You don't need S-Off to fastboot flash boot.img. Just an unlocked bootloader.
bayartiesto said:
Your phone is bricked?
Try flashing this ROM
http://forum.xda-developers.com/showthread.php?t=996368
Click to expand...
Click to collapse
This is not at all helpful. He is asking for boot.img or S-Off help. If he can't do that his ROM is irrelevant.

OMG. this is the worst place for help ever. I have Jelly time installed and I can get into it But only AFTER forcing the boot.img to boot. I CANNOT boot into jellytime by it's self normally. BECAUSE I cannot flash the boot.img file I get an error message. Because I need S-OFF to be off. right now it's on. Everything I've tried has failed.

AlphaOmegaPrimus said:
OMG. this is the worst place for help ever.
Click to expand...
Click to collapse
This is just about the worst way to start a post where you're asking for help.
AlphaOmegaPrimus said:
I have Jelly time installed and I can get into it But only AFTER forcing the boot.img to boot. I CANNOT boot into jellytime by it's self normally. BECAUSE I cannot flash the boot.img file I get an error message. Because I need S-OFF to be off. right now it's on. Everything I've tried has failed.
Click to expand...
Click to collapse
Did you even read what I wrote before??
bananagranola said:
You don't need S-Off to fastboot flash boot.img. Just an unlocked bootloader.
Click to expand...
Click to collapse
Also, you haven't told us what error message you get when you try to flash the boot.img. And is your bootloader unlocked??

AlphaOmegaPrimus said:
OMG. this is the worst place for help ever. I have Jelly time installed and I can get into it But only AFTER forcing the boot.img to boot. I CANNOT boot into jellytime by it's self normally. BECAUSE I cannot flash the boot.img file I get an error message. Because I need S-OFF to be off. right now it's on. Everything I've tried has failed.
Click to expand...
Click to collapse
What does forcing the boot.img means? there is no other way to flash a boot.img that in fastboot if you are S-ON. There is no need to be S-OFF to fastboot flash. In fact, having S-OFF is not enough to enable flash commands in fastboot (you actually need ENG S-OFF for that).
I suggest that you give detail information about the errors and what you are doing if you want to get helped.

Hello,
I have htc inspire. My phone was new sept 2011 and worked until july 2012. My phone was set to charge only and usb debug disable and was never rooted. One night I put the phone to charge and the next day it I turned it on but it never made past the white screen. I have tried to put the rom on sd card as PD98IMG. I tried RUU. The phone lists:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024 MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
Apr 12 2011,00:55:45
When I try using RUU it gets stuck on reloading bootloader
When I try the PD98IMG method using a goldcard, it gets stuck:
parsing...[SD ZIP]
[1] BOOTLOADER -UPDATING
[2] BOOT
[3] RECOVERY
etc
Please help

Not sure but What helped me get past the HTC logo screen is just recovering the old Stock of the phone.
The link provided is to return back to old stock AT&T Roms.
http://forum.xda-developers.com/showthread.php?t=1385016
Boot your phone in Bootloader mode (PWR + VOL DOWN).
Run the RUU Installer.
For S-Off, Advanced Hack Kit (AAHK) was quite a big help to me.

My problem is I have s-on. Phone freezes when I try pd98img on sd goldcard. I can connect with fastboot but I am not sure how to use it. The phone was in charge only & usb debug off when it use to work.
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024 MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
Apr 12 2011,00:55:45
Any help would be greatly appreciated

[Q] Phone is bricked after install MaximusHD 10.0.0

Hi,
I just got the phone, and I managed to unlock, root it using the guide in here http://forum.xda-developers.com/showthread.php?t=1583427
I then install MaximusHD 10.0.0
I went thru the Aroma, and I need to go to fastboot for s-off. But the screen is off now. When pressing the power button 3 virtual buttons are blinking, so I guess it's not really bricked.
How could I get into fastboot mode?
Thanks

You should have s-off before installing maximus. Anyway press and hold power button about 10-15 seconds to force close the phone, then press again power button(but don't hold this time) while holding down the "volum down" button. That will let you enter the bootloader and you can access fastboot mod from there. By the way if you see that you have hboot 2.16 in your bootloader you can just flash the boot.img from maximus zip and start using your phone
Sent from my HTC One S

Can't access recovery

A friend has given me his Desire S to fix what I originally thought was just a stuck power button that prevented it from starting up. But the button is now fixes and I've been trying the last few days to get it to start up.
What I have tried so far is to enter Recovery mode, but upon choosing it, the phone would just go to the HTC logo screen, fibrate once and then fibrate agian after a second or two for a few times and the screen would go blank. The same happens with normal bootup. It also seems that the phone is still running with the blank screen because I have to pull the battery to startup again.
I then tried to use the latest RUU (Android 4.0) from HTC but the phone is not recognized by the computer (I think it is because it didn't startup enough to be able to present itself to the computer). So I unlocked it and used fastboot (from Ubuntu as OS) to flash the recovery (recovery_signed.img) and boot (boot_signed.img) from the RUU. With this recovery and normal startup would remain at the HTC screen and wouldn't go blank as before - still fibrates a few times.
I also tried to rename the rom.zip to PG88IMG.zip and putting it on a SD and the bootloader does detect it, but presents the normal boot screen afterwards (I think it complains about it being incorrect - the display is too quick for me to see the error).
Now I also have a Desire S and made a backup of it before I installed a custom ROM. So I also tried the recovery.img that I have from this backup, but then recovery is stuck on the blank screen again.
Is there anything that I did wrong, missed or may not have tried yet? And how can I go about to fix it?
PHONE DETAILS (from bootloader screen)
*** UNLOCKED ***
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMC-boot

The PG88IMG wont work coz ur s-on. Ul need to extract the zip file and put the recovery.img in ur fastboot folder and then flash it from fastboot, volume down + power then select select fastboot then plug ur phone into pc and open a fastboot command window and type
fastboot flash recovery recovery.img
Also a ruu u run from fastboot and u need to relock ur bootloader.
(i dunno how all this is done using ubuntu but thats how on windows so im sure ul know or figure it out)

Ok, didn't know that I needed S-OFF for PG88IMG - thanks for pointing that out . I did flash the recovery (paragraph 3), it is just named `recovery_signed.img` and not 'recovery.img` - I assume that there isn't a difference between the two?
Do I open the RUU while in fastboot on the phone (after relocking) or do I run it from a fastboot command?
(On Ubuntu fastboot is installed as a program so I can call it after I CD to the extracted rom folder and I assume it is working since I didn't get any errors)

Pieter2627 said:
Ok, didn't know that I needed S-OFF for PG88IMG - thanks for pointing that out . I did flash the recovery (paragraph 3), it is just named `recovery_signed.img` and not 'recovery.img` - I assume that there isn't a difference between the two?
Click to expand...
Click to collapse
Well it depends, could be 4ext recovery, CWM, or TWRP. But as far as the name, could be called peterpan.img and it wouldnt matter haha
Pieter2627 said:
Do I open the RUU while in fastboot on the phone (after relocking) or do I run it from a fastboot command?
Click to expand...
Click to collapse
Yh boot ur phone into fastboot, connect it to pc, relock bootloader and then run ruu. The ruu should be exe file so just double click it to run.

Ok, relocked it and went into fastboot mode and then opened the RUU, but was not recognized. Then followed this (droid-now.com/2013/10/fix-working-fastboot-drivers-windows-8-1-x64/) since I used Win 8.1 for the RUU and it flashed successfully.
But it is still stuck on the HTC screen - gave it 30 minutes for the first boot after flash. Recovery is also still stuck, so I reflashed and same issue.
Radio is now 3831.19.00.110

Attemting to get my HTC One M8 out of boot loop... help?

Okay, I'm going to begin by saying I'm not particularly well versed in this sort of thing.
Sunday night, my phone ran out of juice and I went to plug it up. Rather than function as normally, the screen stayed off for several seconds while the LED remained orange, as if it was charging. A few moments later, the phone would only go to the bootloader screen, and was stuck in a boot loop.
Now, the phone is still in a boot loop, but I'm trying to boot it from the SD card in order to fix it.
The phone software is official, I've never Rooted it or made any modification to the OS, and the phone status on the bootscreen is as follows:
*** Software Status: Official ***
** LOCKED **
M8_WLV PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-INVALID_VER_INFO
OpenDSP-INVALID_VER_INFO
OS-4.17.605.9
eMMC-boot 2048MB
I"m not quite sure what these stats mean, but any help towards me fixing my phone would be greatly appreciated!

NOSjoker21 said:
Okay, I'm going to begin by saying I'm not particularly well versed in this sort of thing.
Sunday night, my phone ran out of juice and I went to plug it up. Rather than function as normally, the screen stayed off for several seconds while the LED remained orange, as if it was charging. A few moments later, the phone would only go to the bootloader screen, and was stuck in a boot loop.
Now, the phone is still in a boot loop, but I'm trying to boot it from the SD card in order to fix it.
The phone software is official, I've never Rooted it or made any modification to the OS, and the phone status on the bootscreen is as follows:
*** Software Status: Official ***
** LOCKED **
M8_WLV PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-INVALID_VER_INFO
OpenDSP-INVALID_VER_INFO
OS-4.17.605.9
eMMC-boot 2048MB
I"m not quite sure what these stats mean, but any help towards me fixing my phone would be greatly appreciated!
Click to expand...
Click to collapse
Try putting RUU on an SD-Card or through ADB and see if it works.
http://forum.xda-developers.com/ver...zw-m8-master-ruu-firmware-collection-t2946473

andybones said:
Try putting RUU on an SD-Card and see if it works.
Click to expand...
Click to collapse
Edit: I need to read, ugh.
Apparently having it as S-ON is a bad thing?

NOSjoker21 said:
Edit: I need to read, ugh.
Apparently having it as S-ON is a bad thing?
Click to expand...
Click to collapse
S-ON is fine if you don't know or need S-OFF
The thread explains exactly how to flash the RUU
"Option 2
Copy 0P6BIMG.zip to root of a physical SD formatted to fat32. No exfat! No internal storage! Must be external SD formated to fat32!
Reboot phone to bootloader and follow prompts once RUU is detected by phone.
Option 3
Fastboot RUU mode . This method assumes you have a working ADB/Fastboot directory on your PC. Download RUUish file and place in your working fastboot/adb directory. Boot your phone to fastboot mode and connect to PC. Issue the following commands.
fastboot oem rebootRUU
###while in this mode your phone will display an HTC logo on the screen
fastboot flash zip 0P6BIMG.zip
##while in this mode you will see an HTC logo on the screen and a green status bar across the bottom of the screen. When command output ##completes it may say reboot required to flush etc... if that's the case issue a "fastboot reboot-bootloader" command and restart option 1 again.
example
## assuming flash completes and no further flushing/reboots are requested from the cmd output you can now reboot IF you simply wish to reboot the system you can issue "fastboot reboot" which will reboot system.
## expect a good 5 minute plus first boot!"
To answer your PM, use this one:
https://www.androidfilehost.com/?fid=95916177934540511
Rename
DOTTAT_VZWM8_S_ON_5.0.1_RUU.zip
To
0P6BIMG.zip

Okay, I'll attempt this tomorrow b/c I'm in an area with REALLY bad Wi-Fi right now, can I update you in the morning?