Related
SETUP (USER) GUIDE FOR ZPAD with 3G (SMB-A1002-3G) AKA ZPAD T2
** UPDATED 14th March 2011 **
IMPORTANT NOTES for Zpad
Note 1 - Some software, eg Flash, is not on your ROM (maybe this was installed after manufacture). You need to back up these apps first. I'm not sure of all the apps, as I accidently wiped mine first, thinking they would all be on ROM. Fortunately the only one I did miss was Flash, and this can be added later (see below).
Note 2 - This is NOT my work. It's just the steps I followed to get MY Zpad working the way I wanted it (inc Market and Titanium Backup). People waaay smarter than me worked this out and credit should go to them.
Note 3. This is NOT a ROM, and you don't need to flash a ROM, the Zpad works FAST out of the box (I think Quadrant was 2450 (or 2350) from memory)
Note 4. I setup Wireless and Installed File Expert to access the files I needed from my Windows 7 computer.
1. Install Z4Root Version 1.3.0
This is needed to give you "Admin" Access to your device
1a. Install and Open and follow the steps on screen to Root your Zpad
2. Install Clockworkmod following these instuctions
NOTE: This "formats" your Zpad back to factory settings (your "Admin" access remains)
Original Thread - http://forum.xda-developers.com/showthread.php?t=865245
2a. Download ClockworkMod v08 (This version has been found to work best...the newer version causes some issues with some ROMs.) There are two versions available; one for installing ClockworkMod from the internal memory, one for installing it from external memory (microSD/microSDHC card). Download from the original thread above. ** EDIT - It's recommended to use the Internal Memory File and remove your MicroSD card during install/setup **
2b. Unzip the file you chose (cwmod_internal.zip OR cwmod_microsd.zip) to the root folder on the storage option of your choice. This is SDCARD on the ZPAD.
2c. Rename the original Recovery Folder, and move the new Recovery folder from the above ZIP to SDCARD (should now be SDCARD\Recovery)
2d. Move update.zip to SDCARD
2e. Turn off your device.
2f. Press the power button and the Volume+ button at the same time and release them when the Malata splash screen pops up. You should see "Detect a recovery key pressed" pop up in the upper left corner of the screen.
2g. Watch ClockworkMod install. This will not take long. Your tablet will reboot when installation is complete. Nothing will look different unless you enter ClockworkMod by following the steps below…
Entering ClockworkMod:
If you want to get into ClockworkMod you need to shut down your device, then press the Power and Volume+ button (the same way you did to install ClockworkMod). Thankfully this time it will not automatically restart and wipe everything.
Navigating CWMod:
Vol+ and Vol- are to scroll up and down, the home button selects an option, and the back button backs up.
BACKUP ROM NOW!!!
(I installed Flash at this point, Version 10.1.95.22 seemed the only one that worked for me??)
3. Install Google Apps (including Market)
The file is; gapps-mdpi-tegra-20101020-signed.zip. You can download it by following the instructions in the thread below.
Original Thread - http://forum.xda-developers.com/showthread.php?t=842590
Note: Some people have experienced problems with the Android/Google Apps Setup Wizard. I think this is related to Wifi only Zpad's? Thanks to Koaby for figuring out you can delete the setupwizard.apk from the cyanogen mod (gapps-mdpi-tegra-20101020-signed.zip). This fixes the problem.
Note 2: If you are having problems removing setupwizard.apk check out this post http://forum.xda-developers.com/showpost.php?p=12069069&postcount=70
You only need these instructions
3a. Copy download to SDCARD
3b. Hold volume + and power to boot into recovery (go to "advanced")
3c. Choose, choose zip from sdcard
3d. Choose the zip to be applied as an update
3e. Let Zpad boot and complete GMail Login Details (I had problems here, but my GMail details were stored... not sure why)
4. Fix the Market
http://forum.xda-developers.com/showthread.php?t=865245 (Part 3, step 3)
4a. Open the Market app. Once it loads close it (press the home button).
4b. Go into Settings – Applications – Manage Applications – Google Services Framework – Force Stop – Clear Data
4c. Go into Settings – Applications – Manage Applications – Market – Force Stop – Clear Data
4d. Go back to your home screen and open up the market. You should get an error. If not, redo steps 3 and 4 until you do.
4e. Reboot your device. After it starts back up let it sit for a minute or two to let things in the operating system normalize. Open the Market. Reboot your device.
4f. Open the market again and enjoy. You now have Flash and the Android Market. (Keep in mind, this is not the FULL market, it just makes around 99% of it available. It is unknown which apps are not available. There is a full market fix, but it is MUCH more complicated).
5. IMPROVED MARKET
http://forum.xda-developers.com/showthread.php?t=861044
(Edited out the bits not needed)
5a. Now you are going to re-do the original Market Fix. First, make sure Market is running, and browse around in it for a few seconds. If you don't do this, there may be no cache to clear and for some reason the market fix may not work. Then, go to Settings->Applications->Manage Applications->Running and scroll down to Market. Then hit Clear Cache, followed by Force Stop **DO NOT CLEAR DATA FOR MARKET, JUST CACHE**. Then go back, scroll down to Google Services Framework, hit Clear Data, then Force Stop.
5b. Now try starting Market again and you get the famous Market Error. Now shut down the Zpad, then turn it back on. Wait for Wifi to connect to your network before doing anything!
5c. Now restart Market again. ..... Voila! A truly full market!
Applications I use that work on Zpad
Root Explorer - Access to Root Files (not needed for this setup)
Titanuim Backup - to Backup EVERYTHING after I set it up the way I wanted
Astro + Bluetooth Module
File Expert - To access Win7 PC
Spare Parts (version 2.2) - To see battery/cpu use
Pocket Cloud - Access work server
MoreLocale 2 - Set Location to Australia
Button Savior - So I've got buttons on the left side too
Touchdown - Sync with Exchange Server
MSN Talk - In case I gets some mates one day
Dolphin Browser HD, with addons; Google Translate, Tab History and AdBlooker
Launcher Pro - The Zpad interface is not that good
Lookout - Antivirus
I hope this helps, Mal.
Again, all credit to the original posters, I just thought best to share the steps I followed for other Zpad users.
PS: I have the original ROM from my Zpad. Happy to share if anyone can point me to the best place to upload it.
In case I forget anything or need to add more stuff
zpad just wifi no 3g
I,m assuming this works on the zpad without 3g only wifi as well. Could you confirm.
Thanks
It should work fine. Just make sure you do a backup before step 3 and you'll always be able to go back to standard.
Once it's all running, set it up the way you like, eg mail, apps etc, then install Titanium Backup an get a backup of your settings and apps.
Now if something ever goes wrong you'll be able to go back to your apps and settings or worst case back to Factory settings.
Thanks but issue
Hello
Thanks for your update. I followed your instructions and get to the welcome screen after installing the apps. It states touch the android to begin, which I do it clicks but nothing happens. Any suggestions.
I think from memory there was a "next" button that appeared on the bottom right, I think? It's just the GApps setup I think and I'm pretty sure you can skip it too. If not, try a reset again through clockwork. That's what I did and it seemed to work the second time??
If you have an SD Card in, try removing that and doing it again too.
Cheers, Mal.
Hello again
Thanks for the ideas. Unfortunately I can't get passed the touch the android button. bottom right is a button to change language, and bottom left is a button for emergency call.
Reloaded it about 10 times now and no luck. If you think of something let me know.
You did touch the Android Man in the middle right (sorry if you have just thought I'd check).
You could try plugging in a USB mouse, something has gone weird with your touch screen I think???
Same Problem Cannot pass the android men!
Can you talk me through what happened?
You installed clockworkmod, backed up the ROM, then let the system boot. Did everything work at this point?
Then you copied the gapps and rebooted but entering recovery this time. You selected the gapps zip and let it boot. This is where its got to the Android man and you couldn't get past right??
Yes, I try to bypass the ANDROID man welcome but nothing seems to work I redo all the steps several times now. I long press the home and acces app killer, even go to setting an try to shutdown all running apps but nothing happen. Mine is the SMB-1002-WIFI model. all help will be appreciated. And thanks
Did you set your wifi up and have internet access. You need this when you start it up as it will try to log on with your gmail account from memory.
Yes I did connect to the WIFI with no problem, really fast indeed. I also have acces to the system settings by long press the home butom, but cannot go by the android man everything else is hid behind
I think the Android man is the google apps setup wizard. Maybe I had my gmail setup already and that's why it seemed to work?? Give that a try if you can?
I think I forced closed the setup wizard on mine and that seemed to work too.
Let me know.
Backup of Rom
Hi,
Are you able to post a copy of a backup of your original Rom as I only have the chinese version and I don't know how to use the 3g.
Thanks
Jonesie
Yep, happy to upload my stock ROM.
Can anyone recommend a place to upload my ROM. It's about 230Mb in total, so I need a place that can take files over the usual 200mb limit.
hotfile.com seems to have an upload limit of 400MB.
And you can download free. It's like rapidshare, only seems to have faster download.
I try everything, but nothing seems to work. All the apps run smoothly behind the "Android men" (SetupWizard)
I Force Stop Setup wizard - when try to go home setup wizard start again
any ideas are welcome
Can you enter your Gmail account by opening the Gmail app? That may work?
Yes I do with no succes.
I came up with a cheap solution.
First I delete the setupwizard.apk from the cyanogen mod (gapps-mdpi-tegra-20101020-signed.zip)
I follow your guide step by step *include the installation of flash
Infamous "Android Man" is no more!
I create a google account, No problem
So far everything is working. I will keep you updated
So, this may sound stupid, but it actually works...
To turn on NFC in any JB ROM:
1. Make a Backup
2. Install any ICS ROM.
3. Turn NFC on within the ICS ROM.
4. Restore back to JB and NFC will be turned on.
To fix GPS (Navigation just says "searching for GPS").
NOTE: I Have only tried this doing a wipe, and installing ROM clean. It may work doing a restore, it may not.
1. Make a Backup
2. Install any ICS ROM.
3. In location settings, make sure Verizon Location Services is unchecked and everything else is checked.
4. Open Google Navigation and let it go until it starts giving you directions and locks on to GPS.
5. Factory Reset
6. Wipe Cache and Delvik Cache
7. Install JB Rom and gapps(if needed)
8. Wipe Cache and Delvik Cache.
9. Reboot.
10. Open navigation and let GPS lock on and it start giving directions. (This may take a while the first time)
Should be good to go from then on.
Any question, feel free to ask. If I helped you out, make sure to hit the "Thanks" button.
Dude, thanks. Why has no one else liked this?
This didn't work for me; nor did trying to flash the nfcfix.zip that others have suggested.
I have also tried to apply all of the nightly updates from CM10.
In my case, since i was using G Wallet, NFC was already turned on before making the update to CM10 stable (1st flash).
Upon getting CM10 up and running, the option was there, but off. When I turned it on, then it grayed out.
Then after a couple reboots, it just went away all together.
Anyone have any other options to try? I got in the habit of using Wallet, so I'd like to be able to keep CM10, and use Wallet, S-Beam, etc..
bschuster said:
So, this may sound stupid, but it actually works...
To turn on NFC in any JB ROM:
1. Make a Backup
2. Install any ICS ROM.
3. Turn NFC on within the ICS ROM.
4. Restore back to JB and NFC will be turned on.
To fix GPS (Navigation just says "searching for GPS").
NOTE: I Have only tried this doing a wipe, and installing ROM clean. It may work doing a restore, it may not.
1. Make a Backup
2. Install any ICS ROM.
3. In location settings, make sure Verizon Location Services is unchecked and everything else is checked.
4. Open Google Navigation and let it go until it starts giving you directions and locks on to GPS.
5. Factory Reset
6. Wipe Cache and Delvik Cache
7. Install JB Rom and gapps(if needed)
8. Wipe Cache and Delvik Cache.
9. Reboot.
10. Open navigation and let GPS lock on and it start giving directions. (This may take a while the first time)
Should be good to go from then on.
Any question, feel free to ask. If I helped you out, make sure to hit the "Thanks" button.
Click to expand...
Click to collapse
Hi/Hello XDA's members.
So you got an error like com.android.process.media or com.android.process.acore has stopped and it keeps popping up on your screen from time to time and it gets so irritating. So here's an alternative way to fix a system error without losing your user data.
Note: I made this thread for An alternative way to factory reset and at at the same time to fix those errors.
Things we need:
*ROOT*
Titanium backup (with complete backup of your user and system apps)
A backup of your contacts, calendar, accounts etc.. (Everything you need) (Not made by Titanium, As you might restore the data that cause the system error com.android.process.acore has stopped.)
Understanding..
READ THE WHOLE POST BEFORE PROCEEDING!
Note: I'm not responsilbe for any data loss or if you messed up your phone. This is just an alternative way to fix your system errors without losing user data.
Let's get started:
Step 1) Make sure you have seperate backup of your contacts, calendar, etc. (Once again, Not backup of Titanium.)
Step 2) Open Titanium Backup and wait for it to load everything. Once done, proceed to step 3.
Step 3) Click the search button then click filter button.
Step 4) Untick User and Uninstall then click check button at the top right corner.
Step 5) Click Backup/Restore. Check if all listed apps are system apps (by default you'll see Green, Red, Yellow name of apps which means they are system apps and/or part of the system)
Step 6) Go to Batch Actions (Click the box with check icon at the top right corner.)
Step 7) Scroll Down to "Manipulate data" section.
Step 8 ) Click "Wipe data for user & system apps" (Don't forget to wipe dalvik cache if you need to.)
Step 9) Reboot
Step 10) Restore the data of your contacts, calendar, accounts, etc. (Everything you need) From the backup you made from other backup utilities. (Not made by Titanium Backup)
Note: You may only restore your system data from Titanium Backup if you don't encounter error like com.android.process.xxxxxxx has stopped.
That's all.
If this post helped you, don't forget to Hit my thanks button.
I'm definitely trying out this method. I'm so annoyed by the fc of systemui.
tones160 said:
I'm definitely trying out this method. I'm so annoyed by the fc of systemui.
Click to expand...
Click to collapse
Try wiping the data of system UI and do some workaround. It's pretty easy to solve but still, depends on the situation.
Sent from my Lenovo A706.
Rom: CM10
If you liked my work kindly press my thanks button.
Ragkhuza said:
Try wiping the data of system UI and do some workaround. It's pretty easy to solve but still, depends on the situation.
Sent from my Lenovo A706.
Rom: CM10
If you liked my work kindly press my thanks button.
Click to expand...
Click to collapse
Darn it lol. Just tried and none of it works. i think it may be the ROM.
Newbie "XDA" here
I change my phone original bootanimation and then i get No Command when i factor reset .. Nothing Happend how do just restore my (/system) /system/media bootanimation.zip
Updated: 03/24/2015
Hi all,
I did this mostly for practice but I thought it might be helpful so I went ahead and posted.
Stock LG D850 20f ROM
[*]Rooted/SuperSu
[*]Most bloat removed
[*]Oversharpening fix
[*]Flashable zip
[*]init.d support*
[*]CarrierIQ Remover*
*Init.d support is implemented in ROM only, not the kernel. CarrierIQ is removed automatically after first boot via an init script. Say thanks to @skeevydude for his help in getting this done. I shouldn't say "help", he pretty much did it!
Installation
Flash the Lollipop modem - see @autoprime 's thread here for modem zip
Flash the ROM zip
Wipe cache and dalvik (and in some cases data) if coming from a different ROM
Download
v3* - https://www.androidfilehost.com/?fid=95916177934548695
[QRCODE]https://www.androidfilehost.com/?fid=95916177934548695[/QRCODE]
*No change at all to the ROM itself since v2, I just realized that I've been forgetting to zero out the free space on the image file before uploading, which saves about 600 MB when zipped. New flashable zip is about 1.1 GB instead of 1.7 GB.
Older versions:
v1 - https://www.androidfilehost.com/?fid=95916177934543883
Apps Removed
/system/app:
Google Books
Google Chrome
Google Cloud Print
Google Drive
Facebook
Hangouts
Google Newsstand
Google Play Games
Google Play Music
Google Play Movies and TV
Google Plus
Twitter
/system/priv-app:
ATT Address Book
ATT Caller Name ID
ATT DriveMode
ATT Games
ATT Locker
ATT Lookout
ATT Mobile Locate
ATT Remote Support
ATT Smart Wifi
ATT Mobile TV
ISIS Wallet
ATT Visual Voicemail
MLT (LG tracker)
/system/vendor/app:
Amazon Kindle
ATT Family Map
ATT Home
ATT Keeper
ATT MHS Launcher
ATT Navigator
Uber
DeviceHelp
myATT
YP Mobile
ATT Apps
In case you want some of the ATT apps back, I have uploaded a zip here with those apps. This is NOT a flashable zip. You have a couple of options:
1. You may be able to install these as a normal (user) app by just pulling out the apk and installing the usual way.
2. If that doesn't work as expected, copy the app folder from the zip into the appropriate system folder as listed in the "Apps Removed" section.
Download: ATT Apps
Xposed Info
cmulk said:
Xposed has a couple of bad side effects at this point, so before doing anything you need to use Titanium or something similar to Freeze (this basically what the "helper" does):
LGSmartCover
Weather
Weather Theme
WeatherPlatform
Then you can install xposed as in the thread here: http://forum.xda-developers.com/showthread.php?t=3034811
However, there is still one more bug to keep in mind: Xposed will crash the Tethering and Networks menu. There is no fix for that yet, but as a workaround you can download some apps from the play store (like Mobile Network Settings), to shortcut around the menu that force closes.
Click to expand...
Click to collapse
Credits
@autoprime - Flashable zips, bump'd boot.img, and very clear instructions in his thread here
@timmytim - uploading the lollipop stock images (although I know a lot of others were working on that too)
@Skin1980 - Oversharpening fix
@skeevydude - init.d support and carrierIQ remover
CarrierIQ Removal
CarrierIQ has now been removed!
The removal is done via an init script that runs at boot to disable the IQ service before removing the files in order to prevent a force close. However, if you have to wipe data/factory reset without re-flashing the ROM, you will get a force close on the first boot. The good news is that I've tested this scenario and it should fix itself if you just wait about 20 seconds. In other words, the mentioned script does it's thing to stop the service to fix the force close and you are good to go after that.
Old info below:
cmulk said:
On the 20f lollipop rom (either mine or stock, there's no difference) either freezing LADDM or removing the libraries and LADDM as you mention will cause a force close unless you disable the "IQService" first, which is built into the framework-res.apk. I have repeated it multiple times and it has been discussed quite a bit in the Lounge and other threads. Disabling the service is easy for users to do with the "DisableService" app, and then you can remove LADDM and the libraries as mentioned. The difficulty is that disabling a service is a user setting, so, for example, if I reflash my ROM without the IQ files onto a phone with clean /data, I will again get the force close and an unusable ROM.
Click to expand...
Click to collapse
Manual Steps
In the meantime, here is how users can manually disable CarrierIQ. I take no credit for this method, it is posted in several places by several people, I'm just putting it here for convenience:
YOU MUST DO THIS IN ORDER (or at least the first few steps)
1. Download the "DisableService" app from the play store
2. In the DisableService app, go to System -> Android System and disable the "IQService" service
3. Use a root explorer to delete the folder /system/app/LADDM
4. Use a root explorer to delete /system/lib/libiq_client.so and /system/lib/libiq_service.so
5. (Optional) Uninstall DisableService
Remember, disabling the service is a user setting, so if you need to wipe /data for some reason, you will need to re-flash the ROM (which has the CarrierIQ files included) or else you will get a constant force close when your phone boots.
I'll give it a try, thanks
Flashing now. Will report.
I will be watching this ROM. Thanks for posting.
Exactly what does " if coming from a different ROM" mean? I'm on 4.4.2 10f Wulf (stock - rooted) ROM
JeffDC said:
I will be watching this ROM. Thanks for posting.
Exactly what does " if coming from a different ROM" mean? I'm on 4.4.2 10f Wulf (stock - rooted) ROM
Click to expand...
Click to collapse
Just clean flash to save yourself a hassle
2SHAYNEZ
Thanks for your work. I wish I had some skill in this realm. It'd be nice to pick and choose which apps you wanted removed. I prefer the stock ATT Visual Voicemail app over the one in the Play Store as its more reliable. I also use some of the Google Apps that are removed here as well. But great job in getting something debloated out there.
Sent from my LG-D850 using Tapatalk
Flashing lollipop Issues
Thanks for your work.... When flashing the 2 lollipop roms, 9 out of 10 times I get just a screen with icons, no wallpaper, no notification pull down no buttons at the bottom. I flash the modem the rom then SU and clear cache. I have only got the other ROM to flash successfully once. The same is going on with this ROM, is this happening to anyone else. I flashed it 5 times with the same results, would anyone know why this is happening, seems others dont have this issue. Thank you again for bringing us a debloated Lollipop rom.
shayneflashindaily said:
Just clean flash to save yourself a hassle
2SHAYNEZ
Click to expand...
Click to collapse
Here is what I understand for a clean flash:
"1. Boot into Recovery
2. Make a Nandroid backup
3. Wipe data/factory reset
4. Wipe cache partition
5. Wipe Dalvik Cache
6. Flash ROM
7. DO NOT REBOOT – STAY IN RECOVERY
8. Select backup and restore
9. Select advanced restore
10. Select the Nandroid backup you made above
11. Select Restore data
12. Select Yes – Restore data
13. WAIT!
14. REBOOT"
What I do not understand is step 8, which selects the backup made in step two... and then flashing the backup over the (new) ROM flash in step 6. Wouldn't that overwrite the new ROM you just flashed?
JeffDC said:
Here is what I understand for a clean flash:
"1. Boot into Recovery
2. Make a Nandroid backup
3. Wipe data/factory reset
4. Wipe cache partition
5. Wipe Dalvik Cache
6. Flash ROM
7. DO NOT REBOOT – STAY IN RECOVERY
8. Select backup and restore
9. Select advanced restore
10. Select the Nandroid backup you made above
11. Select Restore data
12. Select Yes – Restore data
13. WAIT!
14. REBOOT"
What I do not understand is step 8, which selects the backup made in step two... and then flashing the backup over the (new) ROM flash in step 6. Wouldn't that overwrite the new ROM you just flashed?
Click to expand...
Click to collapse
I always do a clean flash.. dont need to back up and restore and still get bad results.
louvass said:
I always do a clean flash.. dont need to back up and restore and still get bad results.
Click to expand...
Click to collapse
That's not encouraging.
louvass said:
Thanks for your work.... When flashing the 2 lollipop roms, 9 out of 10 times I get just a screen with icons, no wallpaper, no notification pull down no buttons at the bottom. I flash the modem the rom then SU and clear cache. I have only got the other ROM to flash successfully once. The same is going on with this ROM, is this happening to anyone else. I flashed it 5 times with the same results, would anyone know why this is happening, seems others dont have this issue. Thank you again for bringing us a debloated Lollipop rom.
Click to expand...
Click to collapse
I have not seen that issue, but in case you are not clearing data you may need to try clearing dalvik cache.
Also, (and this is just a shot in the dark) you could try formatting system before doing anything else just in case something strange is left behind there.
JeffDC said:
That's not encouraging.
Click to expand...
Click to collapse
You can try dirty flashing first without losing any of your data.
1. Back up your current Boot and System
2. Back up your current modem (if you're coming from the Kitkat modem), or just download a flashable KK modem already posted on XDA
3. Flash the modem and ROM in this post
4. Wipe cache and dalvik
5. See if it works
If it's not working, then you will need to restore your boot, system, and modem to go back to your original kitkat setup without losing data.
Otherwise, you'll have to backup with Titanium and do a clean flash (wipe data) as already mentioned. Using Titanium makes clean flashing not so bad
I do clear Wipe cache and dalvik I wipe everything and it boots back into a desktop and thats it no notification, the same thing happened with the first lollipop.. but after 10 flashes it finally took... so I thought Id try your de-bloated and the same thing is happening again, not sure why this is. I can jump back to kk after flashing the modem without issues. Thank you again for your work.
Pdj7969 said:
Thanks for your work. I wish I had some skill in this realm. It'd be nice to pick and choose which apps you wanted removed. I prefer the stock ATT Visual Voicemail app over the one in the Play Store as its more reliable. I also use some of the Google Apps that are removed here as well. But great job in getting something debloated out there.
Click to expand...
Click to collapse
I agree that I use most or all of these Google apps as well. However, they update so often anyway that I prefer to just have them as user apps (otherwise you end up with 2 copies - the old static version in the system apps folder, and the updated version in the user apps folder).
As for the visual voicemail, I have posted the ATT apps in a zip in the OP. Visual voicemail is in the VVM_ATT folder.
Thanks!
cmulk,
Would you please clarify post 5 and 9 questions?
JeffDC said:
cmulk,
Would you please clarify post 5 and 9 questions?
Click to expand...
Click to collapse
Sure thing! That's actually what I meant to do in post 13. I am not sure if you can flash over 10f without wiping data, but you could give it a try without losing anything (except time) if you look at post 13.
You should clear cache and dalvik mostly any time you are flashing, unless you are just flashing over another stock 20f ROM.
louvass said:
I do clear Wipe cache and dalvik I wipe everything and it boots back into a desktop and thats it no notification, the same thing happened with the first lollipop.. but after 10 flashes it finally took... so I thought Id try your de-bloated and the same thing is happening again, not sure why this is. I can jump back to kk after flashing the modem without issues. Thank you again for your work.
Click to expand...
Click to collapse
Have you tried formatting /system before doing anything else? I'm not sure that will make any difference, but just for process of elimination at least
cmulk said:
Have you tried formatting /system before doing anything else? I'm not sure that will make any difference, but just for process of elimination at least
Click to expand...
Click to collapse
Thanks I do clear everything but my external mem.
Ever since flashing this I'm getting "no sd card" messages every time I try to download anything ( I don't have an external sd card) but it's never been a problem before. I've restored a backup of my stock Tim and the problem followed me after full wipes.
Well, it's mainly the restore part that's not working.
I went from OmniRom to Sultanmod 5.1.1 no problems; all my apps and the homescreen layout auto restored. I went from Sultanmod 5.1.1 to Sultanmod 6.0.1 (full wipe, clean flash and open gapps 6.0 stock) and I cannot get the autorestore to start. I turn the phone on, choose the language, put in my google account and then nothing. It doesn't ask if I want to restore apps or anything.
I tried removing and readding my google account, reflashing again and reflashing with the super version of Open Gapps but it says system partition not enough memory. Anything I can try before I spend the next hour or two setting my phone up back to the way it was?
Akira181 said:
Well, it's mainly the restore part that's not working.
I went from OmniRom to Sultanmod 5.1.1 no problems; all my apps and the homescreen layout auto restored. I went from Sultanmod 5.1.1 to Sultanmod 6.0.1 (full wipe, clean flash and open gapps 6.0 stock) and I cannot get the autorestore to start. I turn the phone on, choose the language, put in my google account and then nothing. It doesn't ask if I want to restore apps or anything.
I tried removing and readding my google account, reflashing again and reflashing with the super version of Open Gapps but it says system partition not enough memory. Anything I can try before I spend the next hour or two setting my phone up back to the way it was?
Click to expand...
Click to collapse
You should probably start by using the Advanced Features of open gapps, put CMSetupWizard in your gapps-config.txt (plus any other apps you want to remove) and do a clean flash and profit. It's been mentioned most likely in the Sultan thread so search there next time. At the restore part it'll show your apps just click next every time and when it offers the skip option, press it and profit
Renosh said:
You should probably start by using the advanced features of open gapps, put CMSetupWizard in your gapps-config.txt (plus any other apps you want to remove) and do a clean flash and profit. It's been mentioned most likely in the Sultan thread so search there next time. At the restore part it'll show your apps just click next every time and when it offers the skip option, press it and profit
Click to expand...
Click to collapse
The Sultan thread was naturally the first place I looked and searched but the only results that came up were talking about titanium backup, which doesn't do homepage layout.
I didn't know there was advanced features for open gapps. Don't understand why removing CMSetupWizard would help but I'll give it a shot. Thanks
worked a treat. Phone is back to the way it was before minus some bloat from gapps that I didn't want. Thanks a lot!
Akira181 said:
worked a treat. Phone is back to the way it was before minus some bloat from gapps that I didn't want. Thanks a lot!
Click to expand...
Click to collapse
How did you do that? I didn't manage to get this working. Can you provide de Google Apps zip?