I understand that this is not really a dev post, but I am hoping it will help the devs figure out a permanent fix. If this is found to be in the wrong forum, please relocate to the correct area and I apologize in advance.
This is tested on Vegan Ginger Edition Experimental
Prerequisites:
-If you do not have Titanium Backup installed, install it now.
-If you do not have a clockwork backup, back up now.
Process:
1. Go into Titanium backup.
2. Go into backup/restore tab.
3. Touch "Click to Edit Filter", filter for "Market" and apply
4. Select Market
5. Press Wipe Data
6. Find Market Updater
7. Touch it.
8. Select Freeze.
9. Clear Data.
Edit: 9a. Select Defrost. (Bigwewe mentions this step in post #2)
10. Touch "Click to Edit Filter", clear, apply
11. Exit Titanium Backup
12. Start Market
13. Accept License
14. Touch My Apps
This is not a perm fix, you will have to run the following steps every time you reboot.
1. Go into Titanium backup.
2. Go into backup/restore tab.
3. Touch "Click to Edit Filter", filter for "Market" and apply
4. Select Market
5. Press Wipe Data
I have been running for a good bit of time tonight after doing this without losing My Apps unless I reboot.
Edit:
This morning the market came up, but I could not access all my apps even though they show in the list. Running steps 1-5 may have to be run more frequently. I also added a step 9A that can be tried.
Thanks to jmbach for input as well.
You forgot to add another step after step #9, which is to unfreeze the market updater. Didn't work for me the 1st time until I went to do the whole process again and notice market updater was still frozen. Other then that. It works like a charm! Thanks!
right now I am playing with pixel density to see if it might be a fix on gtablet like it is on nook.
Just tried it out on the newest vegantab ginger edition, worked without "defrosting" for me, the "freeze" option never changed so I just went on without it with no problems.
I don't know if this is something I have done but it happened to me and I just wanted to see what you guys think/say:
When "freezing" an app it states that that option is only available in the paid TB app? At least that is what I have run into. (another reason to buy the pay version of TB I guess)
I received my G Tab yesterday and within 4-5 hours last night I had installed 4 different ROMs, installed multiple kernels, and tested a ton of apps on each. I even got in to a boot loop, couldn't get the standard market fix to work, when installing at one point it FCd and then said it couldn't install more, etc, but I worked them all out. A few things that I learned that may help people (All instructions are with TNT 4.4 but work with other ROMs in different directories)
Market fix:
The standard market fix that is floating around is not always sufficient. To be sure that it will work, you need Titanium Backup installed.
Steps
1. Settings->Applications->System applications->Market then Clear Cache (if any) then Force Stop
2. Go back one and then Google Services Framework then clear data then Force Stop
3. Go to home and open Titanium Backup
4. Select Backup/Restore tab
5. Select Google Services Framework
6. Select Wipe Data
7. Go to home and open market (it will error and close)
8. Reboot your tablet
9. Open Market and you will have full market (I can't find anything I don't have)
----------------------------
For me, my boot loop came after installing 4 ROMS and on TNT 4.4 it crashed while using an app and went in to a loop. I had cleared everything in between all the installs but something must have been left over. I needed to repartition my sd card in CW. It worked great, but remember, select 2048, and for the second option select 0 or it won't work http://forum.xda-developers.com/showthread.php?t=865245
Also, remember to back up the titanium backup folder and anything else to your computer before doing this. It will wipe everything.
-----------------------------
The last issue was when I was installing a few apps the market FCd and then when I went back in it wouldn't let me install the apps that were going to install. I tried all the regular things like wiping data and cache but it didn't work. What worked was removing the corresponding asec files within the .android_secure folder at root.
-----------------------------
Almost every single app I have installed works great. The only major problem so far? The Grooveshark app. TinyShark works though.
I just got my Gtab too. I installed VEGAn and the kernel to go with it with the latest ClockWorkMod. When I installed Titanium I got an error saying 'ROM is not rooted' or something similar to this.
Hey guys,
Dont get me wrong, im pretty much a noob myself Nowadays alot of developement is going on with the new ROMS, till they are finished I needed a stable ROM and I have to admit nothing is better than good old stock 2.1, but to get it in useable condition you do have to do some tinkering. This guide is aimed at people who have just rooted their phones and want to know what they can do, or for people who want new ideas if they are going back to stock 2.1. Its just a collection of things I do, when I flash stock 2.1.
Please be aware, that although these instructions are accurate to my knowledge, sometimes there are problems, so do not try this if you dont feel comfortable with any of the instructions.
1. Which SBF?
The stock cincinnati bell 2.1 is the most current and the most updated version of all the SBF's. Unless you are uprading to a new ROM which require another type of base SBF this is the way to go for 2.1. It makes no regional differences that I know off, you may have to put in your APN settings. Reasons for using this SBF is, first its the most updated, most stable and reportedly has best camera quality of all the SBF's, plus it is set to 720 MHZ by default. The SBF code is:
Code:
STR_U2_04.1E.1_SIGNED_USASHLSTAB14P2XAPCNCBW039.0R_NACBW_P011_A006_HWp3_1FF.sbf
2. How to Root?
Once you have flashed your SBF, using either RSD lite in windows or sbf_flash in linux, the easiest way to root is using the universal androot app. Install the app on your phone, open the app and click the root button. A little heads up here, you need to be connected to either wifi or the data network before you use the app because to root the phone the app uses an exploit which requires wifi to be toggled. If it isnt on, it will not work. With the wifi on, press root and you're done. The newest stable UniversalAndroot can be found at this link.
http://dl.dropbox.com/u/32033772/UniversalAndroot_1.6.1.apk
3. What can I do after rooting?
First of all you can install Open Recovery + Androidiani Recovery. What these are, are custom recoveries with which you can make nandroid backups, wipe reset your phone and cache and apply neat tweaks to make your phone work better on 2.1. To install open recovery download the openrecovery.apk from the following link.
http://dl.dropbox.com/u/32033772/OpenRecovery.apk
Install the openrecovery app. And reboot your phone once. After the reboot, connect your phone to the PC and create a folder called nandroid and inside that creat a folder called openrecovery. And place it into the root of the SD card.
Code:
nandroid>>openrecovery
Disconnect your phone from the PC. Now open the openrecovery app. And press install recovery. A superuser request will appear. Allow it and open recovery will install on your phone and create the neccessary folders on your SD card. Now connect your phone to the PC its time to install androidiani recovery. Download the Androidiani recovery here.
http://dl.dropbox.com/u/32033772/OpenRecovery-3_3.zip
Unzip the file. You will see one folder and one update file. Copy the folder and paste it into the root of your SD card. You will notice that the computer will prompt you because there is already an open recovery folder in your SD card. Allow the computer to replace, the old folder with the new one that you are pasting. Then copy the update.zip and just place it in the root of your SD card. You are all set and have installed openrecovery.
What can I do with Androidiani?
Turn off your phone. Now press the volume up button and keep it pressed, while pressing the power on button. The phone will boot into androidiani recovery. Use the volume keys to navigate up and down in the menu and use the camera button to select an option. You will see numerous options in androidiani. The first thing to do is go in the Eclair Modding menu.
I usually do the following things.
1) Install memhack: This moves your /cache folder and allow for lots of apps to be installed so your 173 mb app space will not limit you, which is usually why people want to move to froyo in the first place.
2) Install JITV7
3) Eclair Kernel Modification: This installs busy box and increases functionality.
4) Zipalign Apps. This allows less ram to be consumed when you use apps. I usually zipallign system wide.
Reboot your phone normally, after mods are complete.
4. System app removal?
Useless system apps can safely be removed to make space for more apps. I install titanium backup from the market and use it to uninstall apps. Here is the list of apps I usually remove safely.
1. Gestures.apk (Motorola sign gestures, useless app never used it)
2. Corporate Calender
3. Corporate Directory
4. Quickoffice Trial
5. Kickback
6. Soundback
7. TalkBack
8. MotoAccuweather.
5,6,7 are accesibility apps which can easily be redownloaded from the market. Accuweather isnt accurate and I have the stock AOSP geniewidget which is so much more sexier. Ill give the links to those.
GenieWeather & News 2.1: http://dl.dropbox.com/u/32033772/GenieWidget2.apk
Another app I install is the desk clock which is missing in 2.1:
http://dl.dropbox.com/u/32033772/DeskClock.apk.
Okay once system apps are removed. What rooted apps can you use. There are many. Ill just state what I use when I newly Flash.
1) Root explorer, very good for navigation etc.
2) Market Enabler, i use it to install google+ and other apps not avaible in my country.
3) Battery Calibration, everytime you flash a new ROM its good reset your battery Stats.
5. Finally
You can just use your phone as usual. If your phone number format is different because of the US SBF, just choose a different language in keyboard and locale. Itll fix your dialer format.
I choose to not overclock. With wifi on 24/7 and autosync. A few odd phone calls, sms's, 1 hour of GPS when I walk, some gaming, and 2 hours of music. I get an average of 1.5-2 days battery life with this setup. My SD card is formatted completely to FAT32. After installing all my apps, and games. I have 102 MB remaining internal memory.
Hope this has been useful to anyone. Please feel free to make additions.
this is good. something ive been looking for. was on stock rom for a month rooted. very stable but was itching to try out cm6 so i did. ive tried deleting voice dialler with titanium backup but it was kind of not supposed to be deleted because android kept telling me "voice dialler force closed" and i couldnt do anything else so i restored it back. i dont need or want voice dialler. and it also keeps running as a service. any way to stop it?
eejin2 said:
this is good. something ive been looking for. was on stock rom for a month rooted. very stable but was itching to try out cm6 so i did. ive tried deleting voice dialler with titanium backup but it was kind of not supposed to be deleted because android kept telling me "voice dialler force closed" and i couldnt do anything else so i restored it back. i dont need or want voice dialler. and it also keeps running as a service. any way to stop it?
Click to expand...
Click to collapse
Before you ever delete any system apps, you should use TB to freeze them first and see if once you do it causes any ill effects. If not, then uninstall but you can always back up so if you ever want it back, Viola there it is.
This thread is dedicated to hacking and development of the Sharp SH7218u. This is an Android phone with a somewhat unique clamshell form-factor.
Before proceeding, please note that all of the usual warnings apply. The software and techniques described here have the potential to break your device and make it unusable. By using the software and following these techniques you run the risk of bricking your phone. I take no responsibility if this happens - proceed at your own risk.
First, some credits for the work of others:
Z4root:
Developed by xda member RyanZA.
http://forum.xda-developers.com/showthread.php?t=833953
SH7218u Clockworkmod Recovery:
Clockworkmod original developer is Koushik Dutta:
www.clockworkmod.com
Dialer2:
Original developer of now open source dialer is dnaq Productions:
http://dnaq.tumblr.com/
Initial hacking and development work:
Gigi Tse is credited for early and ongoing work for the SH7218u:
http://gigitse.com/
http://www.msharp.cn/forum/t390991/page1/
Now on the instructions....
-------------------
Rooting Your Phone, Installing Clockworkmod Recovery, and Installing Google Apps
Gather the Required Files:
1. Go to the z4root xda thread, login in and download z4root.1.3.0.apk:
http://forum.xda-developers.com/showthread.php?t=833953
2. Download SH7218u_recovery.apk:
(attached below)
3. Download the Clockworkmod recovery flashable Google Apps file from the following site:
http://goo-inside.me/gapps
In the table, you want to select the HDPI, CyanogenMod 6 version. The file that you download should be
called 'gapps-hdpi-20101114-signed.zip'
4. Place these three files on your micro-SD card and insert the card into your phone.
Root Your Phone
1. Boot up your phone and skip the system setup wizard. Go to the app drawer and run 'Settings'.
2. Select 'Applications', and enable 'Unknown sources'.
3. Select 'Development', and enable 'USB debugging'.
4. Exit back out to your home screen launcher, then go to the app drawer and run 'ES File Explorer'.
5. The file explorer should show you the contents of your sd card. Tap on the file 'z4root.1.3.0.apk'.
6. Confirm installation of z4root, and when this is complete select 'Open' to run the app.
7. From within z4root, press the 'Permanent Root' button.
8. Wait until this process is complete, and the phone will reboot by itself. It can take 30 seconds or so for this to happen, so be patient. You are now rooted.
Flash Clockworkmod Recovery Image
You must be rooted for this to work. Do this after you have successfully completed the rooting process above. Also please note that this is not the CWM recovery image developed by Gigi Tse. Her image contains CWM version 3.0.2.4. This is my recovery image and contains CWM version 5.0.2.8.
1. Open the app drawer and run 'ES File Explorer'.
2. Tap on the file 'SH7218u_recovery.apk'.
3. Confirm installation and run the application by selecting 'Open' once installation is complete.
4. On startup, the application will request Superuser privleges - press 'Accept' to allow this.
5. Press the 'Flash Clockworkmod Recovery' button.
6. Wait a few seconds until you see the confirmation message 'Recovery Flash Complete'.
7. Exit out of the application. You now have Clockworkmod as your recovery. You can uninstall the SH7218u_recovery app if you wish as you have no further use of it.
Note for users of Link2SD: This version of Clockworkmod recovery will perform backup and restore operations on the secondary SD card partition used by Link2SD. However, that partition must be formatted in the ext3 filesystem for this to work. Formatting the partition in any other filesystem (e.g. ext2, fat32, ext4, etc.), will result in failure to mount and backup the partition. An SD card can be prepared for use with Link2SD from within this version of Clockworkmod recovery by using the 'Partition SD Card' feature within the 'Advanced' menu.
Install Google Apps
1. Boot into Clockworkmod Recovery. This is done by powering down your phone, then turning it back on by pressing and holding down the number 3 and 6 buttons together, then pressing and releasing the power button. Continue to hold the number 3 and 6 buttons until you see the Clockworkmod screen.
2. Select 'install zip from sdcard' from the menu.
3. Select 'choose zip from sdcard' from the next menu.
4. The next menu will be the contents of your sdcard. Select the Google Apps file - 'gapps-hdpi-20101114-signed.zip'.
5. Confirm the installation and wait until it is complete.
6. Press the back button once to get back to the main screen and select 'reboot system now'. You now have Google Apps installed.
When you reboot the device, you will be taken through the Google account setup. Please note that in order for contacts applications to work with Google synchronization, you will need to install a modified contact editor. The stock firmware on this phone is not intended to sync with the Google servers as it was intended for Chinese users. The modified contact editor fixes this issue. It is free and available from the Market. Look for 'Contact Editor Free' by a developer named 'dmfs'.
Deleted
Deleted
Thank you! Very good job!
No ideas how to get the phone to answer a call when you open?
TabletGuru said:
Thank you! Very good job!
No ideas how to get the phone to answer a call when you open?
Click to expand...
Click to collapse
Hey someone read my thread!!
Sorry, no posts on this thread yet and it has been up for a while. I think most people who have this phone stick to Howard forums or other such sites that cater to the phone type and its region of origin.
As for your question, no...but I have tried. That would require a modification of the phone app or a change to the OS itself as the phone app is the active app when the phone is ringing and the device is opened. If I had the source code for the stock phone app, this would be a fairly easy thing to do. Unfortunately, I have been unable to find the source for the stock device firmware anywhere. I tried compiling a generic Froyo phone app from the Google source, but of course this did not work. This is a somewhat special app that needs to interface with several parts of the device's hardware, so a generic version just doesn't work. Unless Sharp releases the full source code for the stock firmware, I don't think this is going to be possible....at least not from someone with my somewhat limited development abilities.
Sent from my MB855 using xda premium
Google Play
Hey xdajunkman, amazing work you are doing here.
Have you considered adding Google Play to the mix? I was able to get the latest version working just fine on my SH7218u.
How hard would it be to hack the light notifications area of the phone, to make some of the notifications last for 1-2 seconds longer?
I should also add that my phone is giving some really flaky GPS information. It is putting me somewhere in the ocean near China unless I use wifi only. Do you have any experience with this?
EDIT: I don't know why, but the dialer is not working for me with regard to the long-press of the delete key and silent (#) key. No idea why...
EDIT2: It is because I had another keyboard installed; which must do something funky... switching back to a default keyboard and then trying seemed to work!
Thanks for your guide! Do you have got new version Rom? 2.3 or 2.3.5?
johnny8384 said:
Thanks for your guide! Do you have got new version Rom? 2.3 or 2.3.5?
Click to expand...
Click to collapse
Not likely to come. This would mean building something like CM7 for a new device from scratch. This kind of task takes dozens of man-hours for an expert developer, and that assumes that they have access to the original source for the release build. We do not have the original source, and there is no such developer working on this device. We will be stuck with Froyo.
Thank you so much for taking the time to write a guide xdajunkman!
I received my SH7218u today and did everything. The instructions were clear and the whole process took no more than 30 minutes.
Surprisingly, my SH7218u accepts 64 microsd card (after you format it).
Is it ok to have 2 partitions?
One is a ext2, and the other I just created using clockwork mod ext3...
I'm wanting to use that custom rom..
EDIT: clockwork mod Repartitioned my ext2 to ext3 now ಠ_ಠ
and all my apps are "installed"
Going to make a backup rom now.. and then Install xdajunkman's custom rom >__<
EDIT: Ok succesfully installed the Custom rom It looks great I might say awesome work xdajunkman
Ok the question is now.. how to I get back all my previous apps and stuff?
I followed the guide and made a backup already
My 7218u stuck at Sharp logo when boot because i've uninstalled a system apps ( don't remember exactly) what i've to do now? plz help me
P/S: My english sucks, sorry for that
delpan said:
My 7218u stuck at Sharp logo when boot because i've uninstalled a system apps ( don't remember exactly) what i've to do now? plz help me
P/S: My english sucks, sorry for that
Click to expand...
Click to collapse
Boot into clockwork mod by pressing 3and 6 and the power on button, (assuming you have that installed)
Reinstall the rom.. http://forum.xda-developers.com/showthread.php?p=22106340#post22106340
sirjoe1 said:
EDIT: Ok succesfully installed the Custom rom It looks great I might say awesome work xdajunkman
Ok the question is now.. how to I get back all my previous apps and stuff?
I followed the guide and made a backup already
Click to expand...
Click to collapse
It is usually just easier if you wait until you have the new ROM installed before you try and install your apps. There is no reliable way from within CWM to restore your installed apps.
However, because the new ROM is just a modified version of the stock ROM, it should be possible to flash the new ROM without wiping the existing user data and keeping your installed apps. Restore your backup that has all of your apps installed. Then, flash the modified ROM but skip the step in the instructions that tells you to wipe existing user data. Instead of wiping the user data, do the following:
1. In the 'mounts and storage' menu of CWM recovery, select to format both '/system' and '/cache'
2. In the 'advanced' menu of CWM, select 'Wipe Dalvik cache'
Now proceed with installing the ROM as per the instructions. This should result in the modified ROM being installed, but all of your installed apps should be protected.
If this does not work, then you will just have to re-installed the modified ROM according to the instructions (including wiping the existing user data), then re-install all of your apps. For future reference, a great app called Titanium Backup will allow you to backup your apps and restore them after changing the ROM.
sirjoe1 said:
-->My 7218u stuck at Sharp logo when boot because i've uninstalled a system apps
-->( don't remember exactly) what i've to do now? plz help me
Boot into clockwork mod by pressing 3and 6 and the power on button, (assuming you have that installed)
Reinstall the rom.. http://forum.xda-developers.com/showthread.php?p=22106340#post22106340
Click to expand...
Click to collapse
Agree with sirjoe1. Hopefully you flashed CWM as your recovery before you did this. However, if not then booting into recovery mode as described above should trigger a factory reset from the stock recovery partition. I have not attempted this myself with the stock recovery, but usually what this will do is simply return your device to it's stock state. You can then start over using the instructions in the OP....but without deleting critical system apps this time.
Hello again, I've a question, has anyone successfully Overclocked the cpu frequency on this phone using setcpu or similar apps?
Overclocking not possible without either a custom kernel or a kernel module of some sort. As the source for the stock kernel was never released, such a thing would be a HUGE undertaking. Very unlikely to ever happen.
xdajunkman said:
Overclocking not possible without either a custom kernel or a kernel module of some sort. As the source for the stock kernel was never released, such a thing would be a HUGE undertaking. Very unlikely to ever happen.
Click to expand...
Click to collapse
Oh darn, that's such a downer..
These sh7218u threads are so dead nowadays :/
I might have messed up my phone -_- (again)
I went into the /data/sdext2/dalvik-cache and deleted everything and now a few apps have gone missing, and some won't work, they just give me a force close error >___<
I also lost my go launcher ex settings..
and to make things worse.... my internal memory went to 0% free... deleted a few things to clear up 8mb..
Any Ideas how to fix this ? @[email protected]
[Can you guys play 480p videos?
I can't.. 360p runs fine though..]
I am hoping to get this device this week.
Thanks for your tutorial, and I will let you know if it runs out just fine
I just want to state that the root method below does indeed work after the ICS update that Samsung is delivering now (I had to install Kies on my PC to get it, but that worked fine and it installed all the necessary drivers to connect by USB). Yes you need to buy a US$10 (or less) microSD card. I also got the error messages reported elsewhere when running the CWM program that it couldn't mount the card, but somehow toggling internal to external and back it did eventually see the root.zip file and pick it up.
If you see a screen with a bunch of NO NO NO choices when it asks do you really mean to install the root file, just swipe down (on the screen not the volume toggle) and you will see the YES option. That slowed me down as I expected the volume toggle to get there.
This process installs the Superuser app (if successful you will see it in your apps). I'm a NOOB and opted to use Titanium Backup rather than manipulate Superuser directly (Titanium tweaks the Superuser settings).
And boy oh boy is it worth spending US$7 to get Titanium Pro. The freezing stuff is awesome. I have frozen a ton of the bloatware that Samsung stuck on here and man is this tablet now blistering fast (and all those cruddy apps aren't sucking down the battery).
Worth the under US$20 (including the gas to go to the store). Best wishes from Virginia.
<<quoted from the developer forum>>
1. Place the Root.zip and CWM.zip on your EXTERNAL MicroSD Card.
2. Reboot to the recovery Hold down the Sleep/Wake/Power key for about 5 seconds along with the Volume Up key. Once the device powers on, release the Power key, but continue to hold down the Volume Up key until you get in to CWM Recovery.
3. Choose apply update from external storage.
4. Choose CWM.zip and wait until CWM recovery appear.
5. Once the cwm recovery appear: Touch the screen to choose and navigate the options. You'll need to slide your finger up and down to scroll in some menus.
6. Choose install zip from sdcard.
7. Choose root.zip and "Yes - Install root.zip."
8. Reboot.
<<end quotes>>
Thanks for the file links kroodroid.
You also don't need to install CWM to root as you can install from zip files on the sdcard in stock recovery too. Not everyone wants a custom recovery so just putting this out there.
Just so you know you can freeze system apps (verizon crapware) with stock ICS too, its an option in settings>apps you just need to uninstall any updates to them first then the disable function will be visible.
For anyone asking for links to downloads the files they can be found in a number of threads already covering this in development.
http://forum.xda-developers.com/showthread.php?t=1832851
http://forum.xda-developers.com/showthread.php?t=1777003