Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
BT-Parrot-Trinity-WM6
Pls. 1.update Parrot met latest version- www.parrot.com
2. update Cyberon / cyberon patchCVSD: www.cyberon.com.tw
( http://www.cyberon.com.tw/upload/qa1/CVSD_Patch.CAB )
-Maja-
Parrot has latest sotware.
Have installed the patch and will let you know if it improves.
Thanks for the quick reply.
BT-Parrot-Trinity-WM6
abeesley said:
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
Click to expand...
Click to collapse
Have exactly the same problems... WM5 worked perfectly with car kit, but since ROM flash update to WM6 never worked the same way then...
Perhaps a flash update to parrot car kit solves the problem...
Any new issue after this?
I've given up on wm6 at the mo. I use a parrot mini and have the same problem with all the wm6 roms I've tried. Have gone back to wm5 and no problems.
I had same problem
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Parrot BT problems
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I checked my CK3100 firmware version and confirmed that is the last one 4.16_C.
I'll try to install the that same BT extension an let you know...
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
BT-Parrot-Trinity-WM6
dateboy said:
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
Click to expand...
Click to collapse
Have installed and works far better now.
Entire weekend without a problem.
Go to JetWare website http://www.jetwaremobile.com/
Parrot BT Problem
i s my post from Parrot:
Hello sir ,
Thank you for your feed back ,our technical engineers are currently doing some advance tests regarding this issue
Inorder to find solutions.
Moreover you can try this procedure inorder to connect your phone with the kit :
First of all , please delete preving paring settings which is present in parrot ck3200 ( settings/ paried devices )
And also in your phone .
And repair your phone by using the menu « disable syncho »
Regards,
Parrot
( maja )
Hi all,
I have just updated my SPV M700 to udk 6.0 Italian WM6 ROM and I'm not able to pair it with my Parrot CK3500 (or Ck3100) hands-free kit...
I have applied both patches from JetWare and Cyberon but still got connection error...
PDA says that connection security code is not recognized by Parrot and Parrot display says that "Bluetooth connection failed".
Anybody can help with this problem?
Thanks
Regards
Parrot and probl.WM6- ck3200,
Hi, is my 3 post from Parrot:
Hello sir ,
Thank you for your feed back , Indeed We notice some issue regarding the phones working in windows mobile 6 et ck3200,
So we are currently doing some advance tests regarding this issue .
And also we get feedbacks from clients, who mentionned us that in software version 2.03 E windows mobile phones works better than in 2.11 .
I can provide you the software version 2.03 e for ck3200 so that you can test it with your windows mobile 6 phone .
Regards,
Daniel PRASANTH
Customer Service
Parrot
174 Quai de Jemmapes
75010 Paris
France
(maja)
I have a new Sprint 6800 -Mogul (ROM 2.09.651.3) with WM6 (pro CE OS 5.2.1238) factory load . I am trying to get it to work a Bluetooth car kit.
Originally tried a Motorla HF850 and had dropout problems (paired and connected great then randomly dropped the connection.
Just bought a Parrot CK3100 (firmware version 4.16c) and it is experiencing exactly the same problems as described by abeesley (thread item #1).
Scattered throughout various blogs is the same theme, this phone has bluetooth issues but there is no consensus of where the problem is or what to do to fix it.
Does anyone know of a fix?
If not who needs to be chased, Sprint, HTC, Microsoft, Parrot
This is getting very frustrating
Thanks
i deleted all pairing from both sides
paired the device with parot
name appeared
but phone both and call register didn't
I have just had the 3200LS installed into my car and am having similiar problems. Most notibly, whenever the phone rings and i press the answer button on the parrot, it disconnects the bluetooth and then i cant hear anything. It does this every single time, but works fine (well 80%) when i dial out from the parrot.
With my Motorola HF850, I have the same issue referring the route to the CK speaker when answering a call. I tried to install all the software/Radio ROM...no way! MY P3600 WM6 does not want to work properly...while no issues running WM5
I have the same problem with the Parrot minikit and HTC TOUCH
Hi all,
I just bought the Parrot minikit, and I am facing the same problems with the HTC TOUCH.
The minikit is paired perfectly, when I dial a number from the TOUCH, the sound of the call remains on the TOUCH, only when pressing the answer button in the minikit it sometimes transfers the call to the minikit.
I opened a SUPPORT case to Parrot and they are saying:
"We have fully tested the HTC Touch in France with our Minikit and we did not see any impediments. "
So I emailed them back with allot of links describing the problem.
Good luck to us all
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
BT-Parrot-Trinity-WM6
fl3nd3r said:
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
Click to expand...
Click to collapse
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
xmaavx said:
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
Click to expand...
Click to collapse
Hi, thanks for your hint. Unfortunately I tried with all of these stuff, but still having the same [email protected] moment I run Lasagna ROM 3.05 KE Full with Jetware ext...and still struggling...I'm desperate....the only way to make it works is to roll back to WM5...but I do not want...
Hi, guys. I'm having a problem with connecting to my Harman/Kardon GPS-810 portable navigation device. I had trouble prior to hacking my phone with WM6, but now when I attempt to connect, no audio is transmitted. At first, I thought it was just a problem with Nitro's bluetooth stack, but I've since replaced his ROM with Gnat's 6.1, and I'm having the same problem. The GPS-810, by the way, is based on Windows CE, so you wouldn't think there would be a problem. Has anyone else experienced something similar with a GPS device? My phone connects fine with my Motorola headset....
Daryl
Yes, I have the same problem with my Tornado/Gnat WM6.1. I can send files via bluetooth without any problem, but I can't receive anything! Others see my device name, but it fails to send something to my device.
Anyone has any suggestions?
Oh, this is a different problem ... I'm connecting my GPS to MY PHONE. It downloads my phonebook and call history, but when it connects with a call, it refuses to transmit any sound to its speaker. It worked with the old WM5 (it was flaky, though).
Daryl
Has anyone else experienced this problem?
Daryl
just check Receive incoming beams in Settings->Connections
Thanks for the suggestion, but that did not work. I had figured that that was for infra-red connections, anyway. I had tried calling my voicemail, though, and after a brief moment, the audio was transferred to my GPS, but when I called another number, it didn't transfer at all, and this time, there was no audio in the phone, either. Strange.
Daryl
Does ANYONE have a solution to my problem?
Daryl
I cannot hear the other party during a phone call routed through my MW600 bluetooth headset. The other party can hear me, and if I switch to speaker (front or back) everything works fine.
Streaming media works fine.
The headset/phone combo worked fine in ClearDroid (but GPS didn't, which is why I switched to CM7)
I have CM7 08082011 build GRJ90 on my phone. I did a complete wipe (factory reset, Dalvik, cache partition) before installing the ROM. I've tried it with and without the audio/gps fix. I've reset my headset, rebooted my phone, deleted the pairing - no worky. I've also used a couple of radios (including the recommended one), and both have the same result.
Is there a patch or some other fix for this?
my bluetooth is working for audio and phone calls. connected to my car
Baseband and CM7 Build?
Pirateghost said:
my bluetooth is working for audio and phone calls. connected to my car
Click to expand...
Click to collapse
Which radio and version of CM7 are you using?
radio: 12.56.60.25U_26.10.04.03_M
mod: CM7-7.1.0-RC1-inspired-pirate (it was just built last night)
I'm guessing that's something you cooked yourself?
How long have you used bluetooth with that ROM? Have you (or anyone else viewing) ever had a problem with it with this ROM?
Trying to find out if reflashing would be likely to fix it...
Thanks!
LysolPionex said:
I'm guessing that's something you cooked yourself?
How long have you used bluetooth with that ROM? Have you (or anyone else viewing) ever had a problem with it with this ROM?
Trying to find out if reflashing would be likely to fix it...
Thanks!
Click to expand...
Click to collapse
since i only built the rom the night before last, 1 whole day (used bluetooth all day yesterday, and last night). i have never had any bluetooth issues on any of the CM7 roms though. i use bluetooth in my car daily. every time i get in and start my car it connects. i use google music and pandora, and make phone calls through my stereo
Thanks for your response; I wiped, reflashed and it's working great.
For anyone else who may have this problem, I found the actual cause.
I reinstalled all my apps and the problem came back; process of elimination showed that my phone call recording app, AutoCallRecorder was causing the problem. I disabled the Use Microphone option, and the problem went away.
Thanks again, pirate. I feel like an idiot for not thinking about that app before.
Hi guys,
I recently bought a Sony DSX-A410BT and went to pair my phone with it.
The pairing part and the phone answere and all the things are working, the only things that aren't working are the ones related to read cotnacts on the phone.
The first time that i paired, i could go to the phone book and even to the recent calls, and now it doesn't work, simply says "No support". So i went to the radio manual, and it says that to read the contacts i needed a PBAP Bluetooth profile, for wath i could see, my FRD-L09 has A2DP Bluetooth profile.
Is there a way of changin this?
I have tryed to unpair and wipe my phone from the radio, but even that didn't worked.
Thanks,
For anyone that wants to solve an issue similar to this one, i've installed this app https://play.google.com/store/apps/details?id=com.android_rsap.irmc
It worked perfectly, there is a free version so you can test it first.