Related
Ok I've got a generic tablet from Walmart, the DOPO MD-740. It's running ICS 4.0.3. I've been in contact with customer service about this thing, and while they're friendly and courteous, they really don't know anything about their product. According to their lead tech "there is no recovery or download mode".
Headache.
Well fooling around with this device, I've found.... SOMETHING....
While holding the volume up button at the same time as the power button, it boots straight to one single image, shown below. I have a feeling it's the download mode. Whatever it is, it's progress. Can anyone recognize what I got into? It's not a fatal error-- when I hit the reset button and reboot the tablet normally, all is fine.
I've tried to reboot into recovery via adb but I get the message that the command is not allowed. And of course, su is not allowed either.
Anyone have any suggestions on running adb on my computer... what process I would need to follow to manually root an ICS tablet? Would I just follow the same steps as I would in manually rooting a gingerbread device, or is there different lines of code I would need to use for ICS?
As for what device the kernel for THIS device has been ported from (it's obviously emulating something that has a magnometer which this unit doesn't have, etc...)... tech support doesn't know that either. The only clue I have that MIGHT help (other than the kernel version, build number, etc... all this is documented in another post, if anyone cares to take a look) is the FIRST boot image is of the penguin.
I would appreciate ANY feedback/information/advice anyone could offer in progressing with this "adventure"!
Thanks
Well with another twenty minutes of blindly pressing buttons I've found the recovery mode. From the screen displaying the android with the open panel (which I have concluded is NOT the download mode), pressing volume up, back, and power at the same time opens the recovery mode. The recovery is:
Android system recovery <3e>
Recovery system v4.00
No option to apply zip from sd, I guess this is to be expected on a stock device.
hi
in application select usb debug mode
install from unknown sources
connect to pc and run DooMLoRD_v4_ROOT
should work
regards
fred
didn't work.
After adb started successfully, sat for two hours and did nothing.
hi
are you using windows ?
is it reconized by windows ? do you have the drivers installed ?
ich processor use that tablet ?
Yeah I'm running Windows Vista, and my PC does recognize the device when it's connected (says drivers have been installed properly when connected under USB debugging mode, no problem transferring files in USB mode)
It's the ARMv7 processor
The device is recognized as Full ASOP on Rk29sdk
I've run across a new problem, which might actually be the main issue of the WHOLE problem. I was trying to push some files with adb from my laptop and it came to my attention that the driver for my device only acknowledges it as a mass storage device, even when the tablet is NOT mounted for mass storage. SOOOO... I guess I need a driver that will allow me to use adb. Any suggestions?
did you try with the drivers package from sdk ?
yup. Even gone as far as uninstalling the adb and sdk programs I had on my pc, downloading the newest versions and reinstalling. My computer "recognizes" the divice, but only as folders. Even when it's not mounted as mass storage.
STILL having te driver issue. Anyone have any suggestions on how to fnd a driver that will work with adb?
Sent from my Full AOSP on Rk29sdk using XDA
How did I root my “Full AOSP Rk29sdk”-MID 7-inch tablet (Android 4.0.3)
Hi Wingnut79 and others,
I have an Android 4.0.3 Tablet 7 inch, named "Full AOSP Rk29sdk" - and was also eager to root it....
After hours of search, trial and error, I succeeded.
My tablet is now fully rooted, and I can use ROM manager and all the aps for rooted android-devices....
How did I do that ?
I explain it here, in the attachment...
As you can see, my Windows is in the Dutch language, so I nevertheless hope everyone can understand what to do where...
I hope this can help...
Make sure it's not a Chinese Apad!
Make sure it's not a Chinese Apad! If u go on ebay u will see tons of tablets with ics 4.0.3. but the android on it it's a modified and weird version. I doublt it even is ics. One of my friends have it, and he cannot use the App Market, bcuz it said "Device not compatible with Market". Did u successfully downloaded stuff form the Market? If not, that maybe it's a piece of Chinese crap and u should call walmart for a refund.
It downloads apps from Android Market, Getjar, Amazon etc... just fine.
BAUDI--
I will try this later this afternoon, is it going to be an issue that my laptop OS is windows vista?
Mine tablet is a chinese tablet - but it's clearly really Android 4.0.3.
So, I also download and install applications from Playstore /Android Market/ etc.
It has Wifi, Bluetooth, 3G, GPS-AGPS, FM-radio,.... and evrything works really fine.
My sole problem was: no rootaccess (what I didn't understand, because it's "Android Open Source Project"...?)
Wingnut79,
as far as described in the guide I refer to, it works equally well on Vista. Just sometimes a little bit other name or place to find the properties or so - but should not be a problem at all.
I forgot to insist on the need to kill and restart adb after each change. I am not sure its really necessary each time, but I experencied that when I first thought "again nothing", it seemed well to work after "adb kill-server" and then "adb start-server"....
At some steps (I can't remember wich) I even rebooted my PC....
Now, everything works immediately...
So ROM Manager etc. works well, I have SuperUser... etc .
Good luck!
baudi said:
Mine tablet is a chinese tablet - but it's clearly really Android 4.0.3.
So, I also download and install applications from Playstore /Android Market/ etc.
It has Wifi, Bluetooth, 3G, GPS-AGPS, FM-radio,.... and evrything works really fine.
My sole problem was: no rootaccess (what I didn't understand, because it's "Android Open Source Project"...?)
Wingnut79,
as far as described in the guide I refer to, it works equally well on Vista. Just sometimes a little bit other name or place to find the properties or so - but should not be a problem at all.
I forgot to insist on the need to kill and restart adb after each change. I am not sure its really necessary each time, but I experencied that when I first thought "again nothing", it seemed well to work after "adb kill-server" and then "adb start-server"....
At some steps (I can't remember wich) I even rebooted my PC....
Now, everything works immediately...
So ROM Manager etc. works well, I have SuperUser... etc .
Good luck!
Click to expand...
Click to collapse
Just because it says it is 4.0.3 doesn't mean its pure AOSP. Remember that the China gov has its hands into a lot and there are things that they like to install on their devices to monitor the users and then close it up so it can't be changed.
Sent from my Inspire 4G using Tapatalk 2
this app rooted my Full AOSP on rk29sdk
I tryed many ways trying to root my tablet, even unlockroot.exe
I found SuperOneClickv2.3.3 and it found my tablet right off, it said my tablet looks rooted( but I knew it was not) so I let it do the root process, it installed superuser also
SuperOneClickv2.3.3
you may have to temp turn your virus program off, I use avira so I right clicked the task bar icon and unchecked realtime protection
universel root
try the universel root for the version of android you have or of similar tabs
asdera-and said:
try the universel root for the version of android you have or of similar tabs
Click to expand...
Click to collapse
Where can we find this?
Is there a download link?
---------- Post added at 08:59 PM ---------- Previous post was at 08:58 PM ----------
carl1961 said:
I tryed many ways trying to root my tablet, even unlockroot.exe
I found SuperOneClickv2.3.3 and it found my tablet right off, it said my tablet looks rooted( but I knew it was not) so I let it do the root process, it installed superuser also
SuperOneClickv2.3.3
you may have to temp turn your virus program off, I use avira so I right clicked the task bar icon and unchecked realtime protection
Click to expand...
Click to collapse
Hello,
So SuperOneClick did work for you?
What kind of tablet do you have?
What version of Android was it running when you used SuperOneClick?
Thank you,
baudi said:
Hi Wingnut79 and others,
I have an Android 4.0.3 Tablet 7 inch, named "Full AOSP Rk29sdk" - and was also eager to root it....
After hours of search, trial and error, I succeeded.
My tablet is now fully rooted, and I can use ROM manager and all the aps for rooted android-devices....
How did I do that ?
I explain it here, in the attachment...
As you can see, my Windows is in the Dutch language, so I nevertheless hope everyone can understand what to do where...
I hope this can help...
Click to expand...
Click to collapse
I tried this and it worked. I got root on my device thanks alot for the guide.
Now to the real problem. I have two identical devices (rk29sdk). One is not booting and I can't manage to reset it.
My idea is make a full backup of the working device and somehow install it on the other one (the broken).
How can I do that - when I try to connect with adb it says:
Code:
C:\Windows\system32>adb devices
List of devices attached
0123456789ABCDEF device
Then this
Code:
C:\Windows\system32>
C:\Windows\system32>adb backup -apk -shared -all -f /backup/mybackup.ab
adb: unable to connect for backup
So it sees the device but I can't backup?
[edit]Now I connect to the device, the 'adb reboot' command works and the device responds. it's just the backup command that is not working.
Please help
asemore said:
I tried this and it worked. I got root on my device thanks alot for the guide.
Now to the real problem. I have two identical devices (rk29sdk). One is not booting and I can't manage to reset it.
My idea is make a full backup of the working device and somehow install it on the other one (the broken).
How can I do that - when I try to connect with adb it says:
Code:
C:\Windows\system32>adb devices
List of devices attached
0123456789ABCDEF device
Then this
Code:
C:\Windows\system32>
C:\Windows\system32>adb backup -apk -shared -all -f /backup/mybackup.ab
adb: unable to connect for backup
So it sees the device but I can't backup?
[edit]Now I connect to the device, the 'adb reboot' command works and the device responds. it's just the backup command that is not working.
Please help
Click to expand...
Click to collapse
i am not at my computer to post the commands, but you can type the commands to backup your system (or dump it) from a androids term console, you need busybox installed
edit: try this link
http://www.addictivetips.com/mobile...es-boot-recovery-and-system-partition-images/
;;
Sent from my Full AOSP on Rk29sdk using xda premium
---------- Post added at 03:40 AM ---------- Previous post was at 03:25 AM ----------
Beeg Boy said:
Where can we find this?
Is there a download link?
---------- Post added at 08:59 PM ---------- Previous post was at 08:58 PM ----------
Hello,
So SuperOneClick did work for you?
What kind of tablet do you have?
What version of Android was it running when you used SuperOneClick?
Thank you,
Click to expand...
Click to collapse
yes it worked for root, my chinese phone just shows Full AOSP on Rk29sdk
Sent from my Full AOSP on Rk29sdk using xda premium
carl1961 said:
i am not at my computer to post the commands, but you can type the commands to backup your system (or dump it) from a androids term console, you need busybox installed
edit: try this link
http://www.addictivetips.com/mobile...es-boot-recovery-and-system-partition-images/
Click to expand...
Click to collapse
The thing is I don't have access on my tablet. It won't boot.
So I can't start an app from the tablet, or maybe I can?
Hi,
As a brand new owner of TF700T (9.4.5.22), I'd like to root it. I've thus read many posts on this site (and elsewhere, which most often direct to this forum..), in particular one describing the use of debugfs.
One pint that I've still not understood is how to install debugfs: post states to unzip the debugfs files and then to install its drivers. But when I connect my TF700T to PC (with debug tckied and asus sync unchecked), my Win7 64 deos not recongizes the device (unknown device). If I go to device manager, I see a "unknown device" and if I "update its driver", I select the directory of drivers/android from debugfs 1.9, but then I get a message that there's no need to update driver, but still I see "no driver" has been installed for the device, and it remains "unknown".
What do I do wrong ? Or do I need to install Asus Sync on PC, and then simply "exit" it to run adb/debugfs ? ("exit" and not "uninstall") ?
I also tried to check various websites, such as the transformerprimeroot site and its tutorials, but it doesn't help me. I also found another website suggesting to install java sdk+Google SDK, etc., but I've the feeling it's not required for rooting... or is it ?
Thanks in advance for your help,
Ricorico94
Try using the USB driver from the Android SDK. Although that might be the same one that's included in the debugfs root tool.
If the tablet shows up as a ADB composite device or something (don't have the tablet nearby to check, sorry) in the device manager you should be good to go.
If you can run "adb shell" and get anything but an error message, you're good to go. Type "exit" to get out of the shell.
Do not install the Asus Sync software, it can only end in tears
Einride said:
Try using the USB driver from the Android SDK. Although that might be the same one that's included in the debugfs root tool.
Click to expand...
Click to collapse
I'm not sure where to look: on Android SDK pages, it states that to connect devices, you need to go to OEM pages, and when I go follow their link to Asus I get the support page which lists firwraes and Asus Sync, but not drivers separately. Does it mean I need to install first Asus Sync, then remove it ?
I could progress :
- first, it coud interest others to see that despite Asus does not propose USB drivers for TF700T, it still does for TF201. I could download such USB drivers, thoug I did not use them..
- as I had to put my laptop on hibernation, when I switched it on again, I unzipped the USB drivers (nothing more, so probably no effect), I plugged in my TF700T and then it was recognised. I assume the download of the USB drivers did not have any effect, but it's probably linked to laptop exiting hibernation (update of some Win7 processes, I guess?)
- in device Manager, under Portable Devices, it states "ASUS Transformer Pad TF700T" and not "composite ADB" as I could read sometimes..
I'm now starting the debugfs.bat, and it's looking ok so far...so I cross my fingers !
It worked ! My device is now rooted. Thanks a lot to all of you !
I'm having the same problem, but unfortunately without Windows suddenly finding drivers.
In Device Manager, the tablet shows up as ASUS Android Composite ADB Interface, but with no driver installed (and the familiar little yellow warning triangle). Windows can't find drivers automatically, and telling it to find them in DebugfsRoot_v1.8/Drivers/Android doesn't work.
As far as I can tell, the ASUS TF700T page currently has no drivers. (I'm not allowed to link 'cause I'm a new user.) The TF201 page does have drivers, listed under 'USB', but diff tells me they're the same as the ones packaged with the debugfs root tool.
I just wanted to check: am I doing something wrong? It seems like rico also saw no drivers at the ASUS page, but then Windows suddenly recognized his tablet anyway.
I haven't installed the Android SDK because I'd rather not install Java, and from what I can tell it won't make a difference here (and rico didn't need it). But I'm a noob, so please let me know if that's what I have to do!
pyrthas said:
I'm having the same problem, but unfortunately without Windows suddenly finding drivers.
In Device Manager, the tablet shows up as ASUS Android Composite ADB Interface, but with no driver installed (and the familiar little yellow warning triangle). Windows can't find drivers automatically, and telling it to find them in DebugfsRoot_v1.8/Drivers/Android doesn't work.
As far as I can tell, the ASUS TF700T page currently has no drivers. (I'm not allowed to link 'cause I'm a new user.) The TF201 page does have drivers, listed under 'USB', but diff tells me they're the same as the ones packaged with the debugfs root tool.
I just wanted to check: am I doing something wrong? It seems like rico also saw no drivers at the ASUS page, but then Windows suddenly recognized his tablet anyway.
I haven't installed the Android SDK because I'd rather not install Java, and from what I can tell it won't make a difference here (and rico didn't need it). But I'm a noob, so please let me know if that's what I have to do!
Click to expand...
Click to collapse
Here is what I did
get ASUS Sync from the Asus Website
install it
Then uninstall asus sync (it screws things up) but keep the drivers or whatever the other thing it installs is
run debugfs.
GrimSage said:
get ASUS Sync from the Asus Website
Click to expand...
Click to collapse
Aw, I was hoping to avoid that. I'll give it a shot, though. Thanks!
Edit: Looks like it worked fine. For anyone else coming to this, just in case it's not clear, installing ASUS Sync installs three additional things: Adobe Air, MSXML, and USB drivers. Obviously the drivers are the important part. I never plugged the TF700T in while Sync was installed; I immediately uninstalled it (and Air and MSXML, but those shouldn't matter). Then I plugged my tablet in and it was detected just fine (as ASUS Transformer Pad TF700T, rather than ASUS Android Composite ADB Interface, so that matches rico's report).
Thanks again, GrimSage!
Edit again: I was worried that I'd screwed something up, but apparently I just had to actually run the Superuser app before su would work. Yay, I'm rooted and can install Arch Linux.
I tried searching everywhere and was not able to find a solution.
When I run it, the following texts appear and then hangs indefinitely.
Waiting for device to be detected...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
From what I've found after searching, people have solved it by reinstalling driver, but it does not work for me.
I set both the security setting and USB debug setting, and driver is correctly installed.
I also tried following this video tutorial (http://forum.xda-developers.com/showthread.php?t=1798586), but that is pretty much what I did in the first place and that Debugfs hangs at the same spot.
I am new to an Android device. I own an iPhone which I jailbroke, but I am moving away from Apple. All I am trying to do right now is trying to change the dock keyboard layout, which apparently requires rooting.
Any help would be appreciated.
The text is fine, but it should go from there smoothly. Do you have ASUS sync installed and running? If so, kill it and kill it with a heavy stab.
Does your PC recognise the Infinity when you plug in the USB cable?
d14b0ll0s said:
The text is fine, but it should go from there smoothly. Do you have ASUS sync installed and running? If so, kill it and kill it with a heavy stab.
Does your PC recognise the Infinity when you plug in the USB cable?
Click to expand...
Click to collapse
ASUS sync is not installed on my computer and it's disabled on the tablet. My computer recognizes it when it's connected.
Sounds like a classic "it should work" situation.
Try it on a different PC perhaps. You may have some third-party software installed that's interacting with the adb. Hard to tell without looking into it really. When you try to use custom commands in adb, not the .bat file, does anything work? What does waiting for device report?
^^^ this
I know this from experience, that not all Windows PC's are created equal. I had an issue rooting my tablet on 2 Windows XP machines and one Windows 7. The final Windows 7 machine I tried magically worked. All had admin access and no restrictions.
qnfauf said:
I tried searching everywhere and was not able to find a solution.
When I run it, the following texts appear and then hangs indefinitely.
Waiting for device to be detected...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
From what I've found after searching, people have solved it by reinstalling driver, but it does not work for me.
I set both the security setting and USB debug setting, and driver is correctly installed.
I also tried following this video tutorial (http://forum.xda-developers.com/showthread.php?t=1798586), but that is pretty much what I did in the first place and that Debugfs hangs at the same spot.
I am new to an Android device. I own an iPhone which I jailbroke, but I am moving away from Apple. All I am trying to do right now is trying to change the dock keyboard layout, which apparently requires rooting.
Any help would be appreciated.
Click to expand...
Click to collapse
If you have adb setup properly you should be able to type "adb devices" from a command prompt. If all is well you will see your tablets serial number listed. If adb isn't setup properly, well you won't see anything.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Thanks for all the help. I don't really have another computer I can use right now.
newellj79 said:
If you have adb setup properly you should be able to type "adb devices" from a command prompt. If all is well you will see your tablets serial number listed. If adb isn't setup properly, well you won't see anything.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Click to expand...
Click to collapse
When I type "adb devices", it says
"List of devices attached" and two blank lines. I guess adb does not see my device. Am I doing something wrong?
I am having the *exact* same issue. I'm not sure what the deal is - I recently used ADB to root my SGS3 so it definitely boggles my mind as to why it's not working on my tablet.
Just wanted you to know you weren't the only one. I'm going to try reinstalling ADB drivers later tonight to see if maybe something is wrong on that front...
---------- Post added at 09:26 PM ---------- Previous post was at 09:15 PM ----------
Okay, let me explain how I got this to work.
First of all, the xda post you referenced has a link to a bad set of drivers. (Don't worry, it got me too at first, shame on that XDA poster for stealing credit in the first place...)
So, go here (http://forum.xda-developers.com/showthread.php?t=1706588) and download the ASUS Android Drivers USB.zip as well as as the rootdebugfs that is there.
Next, open your device manager - the reason I keyed into this is because there was a driver that said "ASUS Android Composite ADB Interface" that did not install properly. Unzip the ASUS Android Drivers and then right click on "ASUS Android Composite ADB Interface" and update the drivers, manually point to the folder that contains all of the ASUS Android Drivers and click ok, it should update your drivers CORRECTLY (You'll get a successfully updated drivers window). After that try using the rootdebugfs bat again, worked like a charm for me after that!
If you're still having issues, please let me know, and post a screenshot of your device manager if you don't mind, it could be the key to your issues as well.
Sorry for the long post, hope I made sense
Forcepath said:
I am having the *exact* same issue. I'm not sure what the deal is - I recently used ADB to root my SGS3 so it definitely boggles my mind as to why it's not working on my tablet.
Just wanted you to know you weren't the only one. I'm going to try reinstalling ADB drivers later tonight to see if maybe something is wrong on that front...
---------- Post added at 09:26 PM ---------- Previous post was at 09:15 PM ----------
Okay, let me explain how I got this to work.
First of all, the xda post you referenced has a link to a bad set of drivers. (Don't worry, it got me too at first, shame on that XDA poster for stealing credit in the first place...)
So, go here (http://forum.xda-developers.com/showthread.php?t=1706588) and download the ASUS Android Drivers USB.zip as well as as the rootdebugfs that is there.
Next, open your device manager - the reason I keyed into this is because there was a driver that said "ASUS Android Composite ADB Interface" that did not install properly. Unzip the ASUS Android Drivers and then right click on "ASUS Android Composite ADB Interface" and update the drivers, manually point to the folder that contains all of the ASUS Android Drivers and click ok, it should update your drivers CORRECTLY (You'll get a successfully updated drivers window). After that try using the rootdebugfs bat again, worked like a charm for me after that!
If you're still having issues, please let me know, and post a screenshot of your device manager if you don't mind, it could be the key to your issues as well.
Sorry for the long post, hope I made sense
Click to expand...
Click to collapse
Thank you, that worked!
In the process of trying to get it to work, I definitely saw "ASUS Android Composite ADB Interface" a few times in device manager. After reading your post, I could not get it to show. I tried uninstalling the driver, searching for new hardware, etc. to no avail. However, switching the USB connection type from MTP to PTP while the device manager was running (I'm not sure why it had to be running) made it show up. Then I used the correct driver files to install the driver and the root worked. That guy who put up the video tutorial apparently put wrong drivers.
mtp to ptp
qnfauf said:
Thank you, that worked!
In the process of trying to get it to work, I definitely saw "ASUS Android Composite ADB Interface" a few times in device manager. After reading your post, I could not get it to show. I tried uninstalling the driver, searching for new hardware, etc. to no avail. However, switching the USB connection type from MTP to PTP while the device manager was running (I'm not sure why it had to be running) made it show up. Then I used the correct driver files to install the driver and the root worked. That guy who put up the video tutorial apparently put wrong drivers.
Click to expand...
Click to collapse
switching from mtp to ptp fixed it for me. it caused the device manager see an new device, which then had a yellow triangle. i just right clicked on it and hit refresh, and it installed the driver. g2g after that.
I had same problem but its solved now n its just drivers problem
just google "phones_brand_name usb drivers"
download and install them
n you are done
I can not figure out what the hell I am doing wrong here.
I downloaded the naked driver pack on the guide page labeled 'Drivers TF700: Windows (Patched Universal Naked Driver)'. I unzipped the folder and plugged my TF700 into my computer. I then opened up the Device Manager and clicked on 'Asus Android Devices', then right clicked on 'Asus Android Composite ADB Interface' and pressed uninstall. I checked the 'delete the driver software for this device' and pressed OK.
The drivers uninstalled successfully and I turned off my WiFi card. I then unplugged and re-plugged my TF700 and navigated to 'Other Devices' in the Device Manager. I right clicked on 'Asus Android Composite ADB Interface' and clicked 'update driver software...' and then on 'browse my computer for driver software'.
I then navigated to the folder that I unzipped the driver pack to and tried to install them (clicking the 'include sub-folders' option). No go, I got the error message 'Windows was unable to find the driver software for your device' or something very similar. I then tried specifically pointing to both the i386 and amd64 sub-folders just to see if that wouldn't work somehow but I got the same error message.
What am I doing wrong? I am using a Lenovo G550 (I think) 32-bit laptop running Windows 7. My TF700 is rooted and unlocked but not much else has been done to it.
If anyone can help me get these installed I would really appreciate it. I assume I can probably set up NvFlash with the standard Asus drivers but I would rather set it up exactly the way it is recommended to ensure success.
Massive thanks in advance!
Blake
Put the device in apx mode then try that process. It should show up as an APX device and that's what you apply the nvflash drivers to.
diablodow said:
Put the device in apx mode then try that process. It should show up as an APX device and that's what you apply the nvflash drivers to.
Click to expand...
Click to collapse
That step isn't till later
@OP - let it update the drivers form Windows. That should be fine. As long as you can see the device and it has no errors or warnings around it. you only need the specific drivers when you get to the APX mode, then it will find them.
I had pretty much the same problem, but it turned out it went a lot smoother with reboot in between. Try that, and disable Windows' desperate searching for drivers on Windows Update -- I got some funky drivers and device designations from the WHQL drivers... Please report back in with any progress or lack thereof, and we'll try and get you back on track.
MartyHulskemper said:
I had pretty much the same problem, but it turned out it went a lot smoother with reboot in between. Try that, and disable Windows' desperate searching for drivers on Windows Update -- I got some funky drivers and device designations from the WHQL drivers... Please report back in with any progress or lack thereof, and we'll try and get you back on track.
Click to expand...
Click to collapse
This.
I had big time problems as well with installing these correctly. You need to reboot after uninstalling all old drivers. 1) Hook up Infinity in Android Debug mode 2) uninstall/delete old drivers like you did 3) reboot PC 4) Plug in Infinity again in Android Debug mode 5) install drivers manually through hardware wizard (use have disk option)
Repeat this process for fastboot mode. Note: you will get a warning that you are installing drivers that have not passed WHQL. Disregard. Install anyways.
Its a pain in the butt process but you have to reboot after uninstalling each old driver. You should probably reboot and remove Infinity USB connection after each successful install of new drivers. This is how I got everything to work. I also tried a different USB port.
Sent from my SCH-I535 using Tapatalk 2
SOTK said:
Repeat this process for fastboot mode. Note: you will get a warning that you are installing drivers that have not passed WHQL. Disregard. Install anyways.
Its a pain in the butt process but you have to reboot after uninstalling each old driver. You should probably reboot and remove Infinity USB connection after each successful install of new drivers. This is how I got everything to work. I also tried a different USB port.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Can you clarify this? What do you mean by 'repeat this for fastboot mode'?
Sent from my unlocked Transformer Infinity
Still no luck. I uninstalled 'ASUS ABD Interface', unplugged the TF700, restarted the computer, plugged the tablet back in, and tried to uninstall. Told me the same thing, that Windows could not find the driver software.
Any other ideas? I have no clue what to do now...
Sent from my unlocked Transformer Infinity
I_EAT_BABIES said:
If anyone can help me get these installed I would really appreciate it. I assume I can probably set up NvFlash with the standard Asus drivers but I would rather set it up exactly the way it is recommended to ensure success.
Massive thanks in advance!
Blake
Click to expand...
Click to collapse
I am having the same exact issue. And strangely I get the same results on both my laptop and desk top systems. I search the forums for solutions and found the same answers that were suggested here but nothing works for me. I just can't figure out what I am doing wrong since so many others seem to be able to install the drivers without problems. Did you ever resolve your driver issue? Are you certain that the standard ASUS drivers will work?
Eddie Hicks said:
I am having the same exact issue. And strangely I get the same results on both my laptop and desk top systems. I search the forums for solutions and found the same answers that were suggested here but nothing works for me. I just can't figure out what I am doing wrong since so many others seem to be able to install the drivers without problems. Did you ever resolve your driver issue? Are you certain that the standard ASUS drivers will work?
Click to expand...
Click to collapse
Guys you need to install those drivers manually,it's not that hard.Here's how you should do it:
1) Put your device in Fastboot or APX mode (depend on the driver you want to install) and connect it to your PC
2) Open Device Manager and select the device
3) Right Click and select " Update Driver Software " and choose " Browse My Computer for driver software"
4) Now click on " Let me pick from a list of device driver " and select " HAVE DISK "
5) BROWSE to the folder where naked drivers are located and select "android_winusb.inf " if you are trying to install the FastBoot driver or choose " android_apxusb.inf " if you are trying to install the APX drivers.
6) After the installation is done reboot your PC
If Windows give you a big red warning about the driver not beeing signed just ignore it and go ahead installing the driver.
Also you should disable UAC if it's enabled.
Pretoriano80 said:
4) Now click on " Let me pick from a list of device driver " and select " HAVE DISK "
Click to expand...
Click to collapse
Thank you very, very much but I just figured that out and came back to this thread to tell it. I wasn't doing the "Have Disk" thing. I was just browsing to the driver's folder. I just successfully installed NVflash. I installed the ADB drivers at first but during the Nvflash installation process I had to go back and install the APX drivers. Thanks again. Now time for Jelly Bean.
Eddie Hicks said:
Thank you very, very much but I just figured that out and came back to this thread to tell it. I wasn't doing the "Have Disk" thing. I was just browsing to the driver's folder. I just successfully installed NVflash. I installed the ADB drivers at first but during the Nvflash installation process I had to go back and install the APX drivers. Thanks again. Now time for Jelly Bean.
Click to expand...
Click to collapse
Haha, nice! but still be very careful, 98% of the brick situation on tf700, NVflash didn't help at all.
buhohitr said:
Haha, nice! but still be very careful, 98% of the brick situation on tf700, NVflash didn't help at all.
Click to expand...
Click to collapse
Is the other way around, NvFlash will help you in 98% of bricks situation, if you don't believe try to investigate more, you can even try to wipe your bootloader if you want to check that percentage.
Pretoriano80 said:
Guys you need to install those drivers manually,it's not that hard.Here's how you should do it:
1) Put your device in Fastboot or APX mode (depend on the driver you want to install) and connect it to your PC
2) Open Device Manager and select the device
3) Right Click and select " Update Driver Software " and choose " Browse My Computer for driver software"
4) Now click on " Let me pick from a list of device driver " and select " HAVE DISK "
5) BROWSE to the folder where naked drivers are located and select "android_winusb.inf " if you are trying to install the FastBoot driver or choose " android_apxusb.inf " if you are trying to install the APX drivers.
6) After the installation is done reboot your PC
If Windows give you a big red warning about the driver not beeing signed just ignore it and go ahead installing the driver.
Also you should disable UAC if it's enabled.
Click to expand...
Click to collapse
I'm still not getting it I guess. I am assuming when doing it this way you do not uninstall the original drivers first or else the computer would not recognize the device correctly, please correct me if I am wrong.
I keep seeing this supposed "have disk" option talked about but I don't see it anywhere. Could someone please screenshot it for me?
Thanks for all the help guys, I (hope) I am close to getting it.
Sent from my unlocked Transformer Infinity
Pretoriano80 said:
Is the other way around, NvFlash will help you in 98% of bricks situation, if you don't believe try to investigate more, you can even try to wipe your bootloader if you want to check that percentage.
Click to expand...
Click to collapse
I'm talking about nvflash for the tf700 only. 98% of ppl in the tf700 experienced this type of issue where nvflash is uselessmost I believe cause by install custom recovery), where your pc failed to see your device. Below is another sample.
http://forum.xda-developers.com/showthread.php?t=1778353
buhohitr said:
I'm talking about nvflash for the tf700 only. 98% of ppl in the tf700 experienced this type of issue where nvflash is uselessmost I believe cause by install custom recovery), where your pc failed to see your device. Below is another sample.
http://forum.xda-developers.com/showthread.php?t=1778353
Click to expand...
Click to collapse
So I see you are trolling this thread too... 98%??? Really??? Can you give a source for that or is that a number you just made up?
NVFlash is useless if you have not already made the backups. But you are completely incorrect if you are suggesting that it is useless even if you have made the backups.
Best not to troll when you clearly do not understand what you are talking about
I_EAT_BABIES said:
I'm still not getting it I guess. I am assuming when doing it this way you do not uninstall the original drivers first or else the computer would not recognize the device correctly, please correct me if I am wrong.
I keep seeing this supposed "have disk" option talked about but I don't see it anywhere. Could someone please screenshot it for me?
Thanks for all the help guys, I (hope) I am close to getting it.
Sent from my unlocked Transformer Infinity
Click to expand...
Click to collapse
Anyone?
Sent from my DROID SPYDER using Tapatalk 2
I_EAT_BABIES said:
Anyone?
Sent from my DROID SPYDER using Tapatalk 2
Click to expand...
Click to collapse
Damn,i can't believe this....When you get to this step " 4) Now click on " Let me pick from a list of device driver " and select " HAVE DISK ... " look on the right bottom of that menu,do you see a "Have Disk" button?.
I_EAT_BABIES said:
Anyone?
Sent from my DROID SPYDER using Tapatalk 2
Click to expand...
Click to collapse
Here is a screen capture from my system. Look in the lower right for the HAVE DISK button. Following the directions giving earlier should get you to this point. Just click HAVE DISK and guide to where you have the drivers on your system. You may not see the list of drivers as on the screen capture the first time you do it. Since I have already installed the drivers the system remembered where to look so the drivers are visible. Also make sure to connect your tablet to your computer in order for the device to be visible in device manager. The device in device manager should say android ABD Interface or something of that sort. It took me awhile to get it too
****edit***
Apparently the link opens another page.Once on that page click the little box for the image.
https://www.dropbox.com/s/ykuv2ac6zxdln7i/driver_update.JPG
As of the time of this reply I have got the Fasboot drivers installed, but I still saw now "have disk" option. After turning UAC off (don't know how that got back on) I was still just selecting a folder as shown in my previous screenshot.
About to try APX, will post results.
Got it! Thank you guys so much, I really appreciate it. This was seriously driving me crazy, but I still don't understand how we are looking at different menus.
Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E
ericdg said:
Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E
Click to expand...
Click to collapse
ADBSetup will get you the drivers you are looking for:
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
Worked for any Android phone I tried.
Thanks, I'll give that a shot and see what happens!
Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E
ericdg said:
Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E
Click to expand...
Click to collapse
Easiest way to tell is open up a command prompt in the folder that adbsetup installed to (C:\ADB I think) and type:
Code:
adb devices
If all is well, then the device will be part of the listing.
Thanks Joel.............I think it worked.
The ADB command came back with:
List of devices attached
HT22_______7 device
That's not a number that I've ever seen associated with my phone, but I assume that's it.
Confirmed.................I was able to reboot the phone by ADB!
Excellent! This will also mean the fastboot commands needed to unlock your bootloader will work too.
.........one would think so, Joel, but I can't get fastboot to do anything. ADB recognizes the phone, and will reboot into bootlocker, but once there it'll do nothing. Windows pops up a message shortly after bootlocker opens that says something to the effect of "there was a problem with USB device not recognized". I tried the command "fastboot devices", but got nothing. I know that I'm darned close, and it's probably something simple, but just can't get it to work. Maybe I need additional drivers for fastboot, or need to move it to another directory?
Thanks,
~E
Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.
joel.maxuel said:
Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.
Click to expand...
Click to collapse
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E
ericdg said:
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E
Click to expand...
Click to collapse
Dont know where you got your HTC drivers, but you should try the ones in this post (step one - hopefully its still live - if not I can dropbox it for you):
http://forum.xda-developers.com/showthread.php?t=1801106
Sent from my LG-D520 using XDA Free mobile app
You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.
ericdg said:
You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.
Click to expand...
Click to collapse
Uh-oh. Either the link was dead when I went through this process back in April, or I had bad organizing skills at one point and didn't put the file in the Doubleshot folder before completing a purge. Either way, I don;t have the file.
Nor did I really need it. The second Doubleshot I rooted I ended up using it in my native Linux environment (no drivers needed), vs my Windows XP emulated through VirtualBox. That's what you could do. Get a live Debian DVD (Im like the XFCE desktop version), boot in, get fastboot:
Code:
sudo apt-get install fastboot
And then use fastboot:
Code:
sudo fastboot ...
Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E
ericdg said:
Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E
Click to expand...
Click to collapse
Just need the one. My recommended file to download is this:
http://cdimage.debian.org/debian-cd...ybrid/debian-live-7.6.0-i386-xfce-desktop.iso
Burn the image (not the file) onto a DVD (can be a rewritable) and reboot with the disc in the drive. Once it's fully loaded, you can either enter commands by clicking on the "terminal" icon on the bottom of the screen (preferred), or press Ctrl + Alt + F1 to get a prompt (may have to log in as "user", there shouldn't be a password). Hope this helps.