Database Info

[ROM] BitterSweet v1.2 (05/1/10) (Sprint leak for NON-Sprint CDMA Heros) 100% DONE

BitterSweet
This ROM is based off DamageControlv2.08.1 and is designed for NON-Sprint CDMA Hero's
As most of you know, NON-Sprint CDMA Hero users can NOT flash the newest Sprint leak due to the auto PRI feature, the Hands Free Activation pop-ups, and the data call failure error, so I have made this possible and safe by modding DamageControl V2.08.1 a little.
This is the BEST ROM for NON-Sprint CDMA HTC Hero users to enjoy the benefits and features of 2.1 and all the fixes of the new Sprint leak with NO Errors or problems!
ALL Mods that work on DamageControl v2.08 or Fresh 2.0d will work on this ROM! Including the Vanilla Lockscreen by Flipz, Expresso, etc.
Features:
All Market Apps are showing (Will change if reported other wise - Thanks Flipz)
MNS (Internet Tethering) WORKING!
ALL LEDs WORKING (Including Trackball)
Removed all Sprint Apps
Syncs with no problems
Removed IM from menu and Gtalk still works!!!
Hands Free Activation error pop-up is now GONE
Does NOT mess up your current PRI (No matter what carrier)
Fixes "Data Call Failure" error on all carriers!
ALL Mods/Themes/Lockscreens etc that work on DamageControl work with this ROM!
LiveWallpapers has been removed, you can download it here ----> LWPS
(Just flash this in recovery)
Changelog:
1.1 to 1.2:
ADDED A CUSTOM BOOTSCREEN... NO MORE SPRINT BOOTSCREEN... YA!!!!!!!!!!!
Tweak GPS + AGPS
Cut down wakeups (should be a bit better battery)
Tweaked kernel and connection settings more
Fix for rosie crash. Redownload skins.
Bluetooth tweaks
Potential market speed fix && Clear sense data issue were widgets missing on first install.
Potential Setup Wizard error fix
.25 xda keyboard
added WiFi Tether back (Sorry about that lol)
1.0 to 1.1:
Optimized APKs
Youtube defaults to HD (Thanks TrevE)
New APPS2SD
Scheduler Tweaks
Working Friendsync
Gallery3d fully working
Newer XDA keyboard
Optimized Even more/Cleaned up directories
Connection tweaks
Fixed fb sync
Ring delay fixes
More dalvik tweaks
Potential audio fix & battery life fix
Removed DConfig and DCUpdater
Beta to v1.0:
Moved AutoKiller to allow it to be uninstalled from the phone
Removed Stocks
Removed the HTC Testing program that drained the battery
Bugs:
NON-Sprint users will not receive voicemail notifications (This is a problem if you are using ANY Sprint based ROM. The only way you can receive Voicemail Notifications is when the ROM is Verizon based. We are going to find the reason why and hopefully fix this issue for all Sprint ROMs)
FIXES:
DO THESE AS SOON AS YOU INSTALL THE ROM OR MAY NOTICE PROBLEMS!!!!
DIAL ##3282# and then choose "Edit Mode" when it asks for a password enter 000000. Go into Data Profile and change the "DSA Server URL" to JUST "https://". Now click menu, then Commit Changes. It will say that nothing was changed... That is fine. Click home and dial *228 (This part has only been testing on Cellular South, Test at your own risk if on another carrier) THIS IS IMPORTANT TO DO IF YOU WANT TO AVOID CONNECTION PROBLEMS OR WIFI/USB TETHERING DROPS, AND IF YOU WANT TO GET DATA ROAMING!!!
Don't like the way it looks? DON'T WORRY! YOU CAN FLASH ANY THEME/MOD THAT WORKS ON DAMAGECONTROL!!! THATS RIGHT!!! ANY MOD/THEME?TWEAK/ETC that is noted to work on DamageControl, WILL work on this rom!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WIPE DATA/FACTORY RESET & DALVIK-CACHE BEFORE FLASHING!!!!
4SHARED: DOWNLOAD

----------RESERVED----------

KyleIsTheBeast said:
Ok, So as most of us know, ALL of the ROMs that have the "Auto-PRI" feature are causing Cellular South users to downgrade their ROMs and reset there PRI. As for other CDMA Hero users (Bluegrass Cellular, nTelos Wireless, and Appalachian Wireless) they are stuck with the PRI they get (which has a TON of data connection issues) or they are forced to brick there phones and take it back to the store because they can not reset their PRI's. I have made a ROM based off the new Sprint leak that is PERFECT for the rest of us! (non-Sprint users) I just have one problem, I can't upload it til Wednesday because of my fail internet connection. So either I will have to wait til Wednesday, or I can tell someone with a fast internet connection exactly what I did to make the ROM, they can make it, and then upload it to a file sharing site! If someone would like to do that for me, please PM me or post here! Also, I will need a few beta testers for this ROM!
Click to expand...
Click to collapse
I'll do it.
pm me now

bump
10chars

How to test it?
I'm a Chinese hero200 uer and I'd like to do some test together with other.
But how to access this ROM? I can't find the linkage to download it.
Besides, what should i report to you?
PM me pls.

Everyone who wants to beta test this ROM has to pm me for the link
You'll get it if you pm me.
Test EVERYTHING, change in PRI, everything, quickboot, wifi tether.

Just an FYI the PRI fix was something that I did for Fresh Rom. So it would only affect my rom and roms built off of my rom. It's not a 2.1/Sprint feature.
I'm still trying to gather up some type of list of what PRI the other companies SHOULD be on.

Flipz, I noticed that, since 2.0 d, your ROM doesn't support Chinese sms any more.
Is it resulted from Sprint? Or Did you make any change comparing with 2.Oc, which support Chinese sms well.
Thanks

regaw_leinad said:
Everyone who wants to beta test this ROM has to pm me for the link
You'll get it if you pm me.
Test EVERYTHING, change in PRI, everything, quickboot, wifi tether.
Click to expand...
Click to collapse
pm Sent. Can't wait to test!! I'm on AW so this is what I've been waiting for.

flipzmode said:
Just an FYI the PRI fix was something that I did for Fresh Rom. So it would only affect my rom and roms built off of my rom. It's not a 2.1/Sprint feature.
I'm still trying to gather up some type of list of what PRI the other companies SHOULD be on.
Click to expand...
Click to collapse
I know. But the DamageControl ROM has the PRI Update and all of the sprint releases has the "Hands Free Activation" thing that causes problems. Also, All of them have the data call error that I posted in a thread a while back. I have managed to fix all of the these issues so non-Sprint users can enjoy the latest leak.

KyleIsTheBeast said:
I know. But the DamageControl ROM has the PRI Update and all of the sprint releases has the "Hands Free Activation" thing that causes problems. Also, All of them have the data call error that I posted in a thread a while back. I have managed to fix all of the these issues so non-Sprint users can enjoy the latest leak.
Click to expand...
Click to collapse
???? no only flipzmode's ROM had that feature, he MADE it and implemented it in HIS Fresh 2.0 ONLY lol.
you shouldn't have received this message on DC or any other sprint rom.

regaw_leinad said:
???? no only flipzmode's ROM had that feature, he MADE it and implemented it in HIS Fresh 2.0 ONLY lol.
you shouldn't have received this message on DC or any other sprint rom.
Click to expand...
Click to collapse
No, the auto PRI feature is what Flipz made. But the hands free activation thing and the data call failure error is with every Sprint leak based ROM that didnt remove the apks we talked about

The download link is up now.
Go for it!

PRI and PRL look good (Cellular South, PRI 1.84_013, PRL 10003)
Pardon me while I ask a lot of, probably repeat, questions about PRI.
Where is PRI stored? Obviously not in the system image anywhere.
What is the difference between the original problem where a "bad" PRI was "installed" and flipz PRI "auto-fix"?
What exactly does PRI do?
Does PRI have any relation to PRL?

Chrome is being asinine and won't let me edit my post, but I wanted to add that the boot screen didn't come up for me. I was expecting it because you noted it, but the solid black screen while waiting to boot was still a bit unnerving.

markachee said:
PRI and PRL look good (Cellular South, PRI 1.84_013, PRL 10003)
Pardon me while I ask a lot of, probably repeat, questions about PRI.
Where is PRI stored? Obviously not in the system image anywhere.
What is the difference between the original problem where a "bad" PRI was "installed" and flipz PRI "auto-fix"?
What exactly does PRI do?
Does PRI have any relation to PRL?
Click to expand...
Click to collapse
Glad to see you like it
The PRL is the "Preferred Roaming List"
To put it simple, it is the carriers way of letting your phone know where towers are and where Roaming is.
As for the PRI, I am not too sure what it is, but I know that it is carrier based, and the wrong one on your phone can cause problems
And for the bad PRI you are asking about, on Flipz ROM, it has an AutoPRI that is really just Sprint based. This means that other carriers who install this ROM will get the newest Sprint PRI which will cause data connection issues.
Also, on DamageControl and other Sprint Leaks, there are a couple of APKs that cause problems with the data connection and some random pop-ups with "errors" that were really just errors saying that you it cant connect to sprint. This ROM fixes those issues

markachee said:
Chrome is being asinine and won't let me edit my post, but I wanted to add that the boot screen didn't come up for me. I was expecting it because you noted it, but the solid black screen while waiting to boot was still a bit unnerving.
Click to expand...
Click to collapse
HAHA I am aware of this. It seems to be a problem with NON-Sprint users. Me and Regaw are working to see what is different from Sprint and other companies that is causing that problem. We are thinking of putting the original boot screen back on there because it works for some odd reason. We will have more info on that tomorrow morning after I run some tests.

KyleIsTheBeast said:
And for the bad PRI you are asking about, on Flipz ROM, it has an AutoPRI that is really just Sprint based. This means that other carriers who install this ROM will get the newest Sprint PRI which will cause data connection issues.
Click to expand...
Click to collapse
So the original Sprint leak just came with a bad PRI, but Fresh comes with a good PRI, which is actually only good for Sprint. Sounds like they are delivered the same way though.
Maybe I should update the first post in the non-Sprint rooting thread to mention this. I was originally led to believe the problem only came from running the leaked Sprint RUU.

Any chance of just posting the Matrix bootscreen?

MikeMcG said:
Any chance of just posting the Matrix bootscreen?
Click to expand...
Click to collapse
When i was making the rom with KyleIsTheBeast, I had him flash my signed zip I made of the matrix bootscreen, and it still didn't work... SOOOO, I'm still seeing what I can do to fix that.

[GPL- Violation] Full HDMI Mirroring(Released)--(NEW UPDATED APP)

:::EDIT:::
FROM Orrebmas himself
Hi,
I was told and verified that the donate button does not work in the version I released. I fixed and re-uploaded it to android central. Please update your post.
Thanks for bringing it to XDA.
-- orrebmas
I have updated the app to the new updated version with the donate button working!
http://forum.androidcentral.com/htc-evo-4g-rooting-roms-hacks/63799-fullhdmi-official-fullhdmi-beta-discussion.html ----BETA Thread Discussion thread made by Orrebmas
http://forum.androidcentral.com/htc-evo-4g-rooting-roms-hacks/35955-evo-hdmi-out-mirroring.html---ORIGINAL THREAD
Thanks to Orrebmas over at Android Central there is a working BETA version of the FULL HDMI for EVO.
All,
It is here finally, FullHDMI "limited time" public beta is attached in this post. This version is to mass test the app and get feedback before the next step.
I will be making an announcement later today about the beta and its purpose, but for now I am attaching it and going to get some sleep. You will need the Kernel posted several pages back on this thread to enable some features, and root. I just realized that non-root is broken as of this version.
Some of the things you need to know about before tinkering with the app, pasting quickly:
Quote:
Originally Posted by bradleyw801 View Post
I have a possible suggestion for those of you that are having the screen going off the edges. I am not ashamed to admit that I was thinking I had the same problem, but I realized that I had a setting for the aspect ratio on the TV set to cut it off.
Most TVs have multiple options for aspect ratio. For example, zoom, hourglass, etc. Just make sure this setting is set to fill the screen.
I am not saying that is the case for all of you, it just was for me. Once I changed the setting, it filled the screen perfectly without messing with the X Y resolutions.
And also:
Quote:
Originally Posted by orrebmas View Post
Adding on to the notes and known issues/observations:
1- To achieve hardware acceleration, video memory (minimal) has to be used. Some poorly coded programs that also use video memory will try to grab a hold of the entire memory block instead of the available. This will cause them to crash when you are in hardware mode reserving a small block of memory to yourself. The only application that I found to be doing this is, strangely enough, HTC's Gallery (specifically video playback mode). Gallery video playback will keep trying to acquire the whole video memory, put the phone in a tight infinite loop doing so and eventually force close (after about 40 sec).
Compatibility or software mode does not use video memory and is safe to keep on while launching Galley video playback. Compatibility mode also does not make use of the "supercharged" feature, custom res or fullscreen mode.
2- FPS: Your frames per second will not be the same as on your phone. This is because the app is designed to keep the phone as primary display and output a secondary to the HDMI port. You are also outputting, most likely, a 1280x720 pixels which is almost ~2.5 times more the normal output. So in total you are pushing 3.5 lcd size screen worth of pixels (phone lcs + hdmi). Things can be improved if we freeze the phone display, but that wont be mirroring (maybe a feature in FullHDMI 2). Expect, however, to get more FPS in 3-D games (I get upwards of 40 fps on Raging Thunder 2) than 2-D sine he 2-D engine does the mirroring.
3- Lag: Some TVs (like Insignia) use an image enhancing and noise reducing engine. This extra processing puts the TV about half a second behind the phone making games unplayable by looking at the TV only. Watching movies is fine since nobody cares if the phone is a little faster than the TV. On this Insignia TV, I had to go in and turn off two image enhancing and noise reducing features, and now my phone and TV track together. I know Sony has its own engine, I do not know if the extra processing there introduces lag. I have two other TVs with no lag issues, but then they don't use any image enhancing engines.
Again, the app should not lag in mirroring, if you experience any lag then please check your TV and share your observation with us.
4- This app was not designed to display youtube or other apps that already work over HDMI. To use such apps you should stop FullHDMI from driving the HDMI signal first.
ENJOY
iF YOU DECIDE TO THANK ME FOR POSTING THIS UP, I APPRECIATE IT BUT NOT NEEDED..I DID NOT DEVELOP THIS APP IN ANY WAY, JUST POSTED IT FOR YOUR ENJOYMENT.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMPORTANT..YOU WILL NEED TO UNZIP THE FILE YOU DOWNLOAD THEN THE KERNEL AND APK ARE IN THERE TO INSTALL!!! You will only need to do this for the RAR file. if downloading from a phone look below
I also uploaded the APK and kernel for everyone on top of the rar file so they can just do it on there phone also. So from the phone download the apk file and the zip file. place those on root of sd card and your good to go. Just boot into recovery and install kernel.

Very cool, but what kernel?

vWvSTATICvWv said:
Very cool, but what kernel?
Click to expand...
Click to collapse
the Original developer said its based off a Netarchy kernel. he didnt specify. i posted to find out which one in specific and when i find out i will post the info up.
when it loads up in your phone it says
KERNEL
2.6.32.15 [email protected] #1

Great post. I guess we will see how this is received now. I must tell you that the mods here tell me that do not not like the spirit in which they say this app was developed . I hope this thread does well to inform people of this type of app and its uses... I also hope those who are against this app being discussed here can refrain from posting and just wait for the dev that they like to come up with their own app that is actually out and available to be tested and used .
I have been using the app for a week or so and am very impressed to say the least . Watching movies wherever j go from my phone has been most awesome.

27scoob said:
Great post. I guess we will see how this is received now. I must tell you that the mods here tell me that do not not like the spirit in which they say this app was developed . I hope this thread does well to inform people of this type of app and its uses... I also hope those who are against this app being discussed here can refrain from posting and just wait for the dev that they like to come up with their own app that is actually out and available to be tested and used .
I have been using the app for a week or so and am very impressed to say the least . Watching movies wherever j go from my phone has been most awesome.
Click to expand...
Click to collapse
yea i saw the other thread..i would have posted in there but it was locked. I only posted this Up because he had officially released it to the public and didnt say exclusive to any site. PLEASE tho mods if you dont like this thread let me know. Thanks.
Yes this app can have benefits in many many ways. i opted to wait for this version as the last release was not supposed to be released. I havent had the chance yet to use this app as my hdmi cable should be getting here either today or monday at the latest.
FOR EVERYONES SAKE PLEASE IF YOU DONT HAVE ANYTHING NICE TO SAY PLEASE DONT POST IN THIS THREAD. WE DONT NEED ANY DRAMA!

Will this work on CM or only on Sense based roms?

SolsticeZero said:
Will this work on CM or only on Sense based roms?
Click to expand...
Click to collapse
I think he said in another thread that it was sense based.

SolsticeZero said:
Will this work on CM or only on Sense based roms?
Click to expand...
Click to collapse
This i am not sure of as i only have a sense based Rom. I remember a lil while back that someone said it would work with only Sense Roms on the original Thread but dont take my word on this one. I would suggest testing it out to find out. of course make sure you backup incase anything happens.

vWvSTATICvWv said:
I think he said in another thread that it was sense based.
Click to expand...
Click to collapse
Ah, ok. Looks like I'll be waiting for Team Win to make it work on CM. Thanks!

Any rooted Sense based rom. Just dont forget to flash the kernel.

t12icky0 said:
the Original developer said its based off a Netarchy kernel. he didnt specify. i posted to find out which one in specific and when i find out i will post the info up.
when it loads up in your phone it says
KERNEL
2.6.32.15 [email protected] #1
Click to expand...
Click to collapse
I see....I wonder if any Netarchy kernel will do? I'm running 2.6.32.27 version 4.3.2 nosbc-havs more. This kernel for me has great battery life and speed on Myn's rom. It would be a shame to switch but this app is too tempting to ignore

Just nandroid your current setup. You need the fullhdmi kernel for this to work. i will post in a few.

mkeena0305 said:
Any rooted Sense based rom. Just dont forget to flash the kernel.
Click to expand...
Click to collapse
im not sure what he meant but he said you would have to flashe the kernel for SOME of the features???? makes me wonder what features.
He said this was just an announcement and he would post up more info later..cant wait.

mkeena0305 said:
Just nandroid your current setup. You need the fullhdmi kernel for this to work. i will post in a few.
Click to expand...
Click to collapse
Thanks for this. I had originally posted this with the zip file. YOU NEED TO UNZIP THE FILE THEN INSTALL THAT WAY

vWvSTATICvWv said:
I see....I wonder if any Netarchy kernel will do? I'm running 2.6.32.27 version 4.3.2 nosbc-havs more. This kernel for me has great battery life and speed on Myn's rom. It would be a shame to switch but this app is too tempting to ignore
Click to expand...
Click to collapse
I am currently using this app with MYN's warm two point two Rls 5 and the battery life is great for me , I am a heavy user ....

It's a shame that there are not a lot if kernel devs that are interested in work with this all. If there are I hope they speak up..

27scoob said:
It's a shame that there are not a lot if kernel devs that are interested in work with this all. If there are I hope they speak up..
Click to expand...
Click to collapse
I agree. I think overclocking may help with performance.

does this make the hdmi work on ay type of tvs now? coz my phone wouldnt work with my sony tv but works on newer tv.

Thanks!!! Will try this now!

adrian2pm said:
does this make the hdmi work on ay type of tvs now? coz my phone wouldnt work with my sony tv but works on newer tv.
Click to expand...
Click to collapse
to tell ya im not sure. some people said it works on some and not on others. You will just have to try the TV out to see if it works.

[ROM] 06-05-11 Ganbaro ROM V0.3b for P10AN01 tablets (Vega, Viewpad 10s, Mobii, ...)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ok, here comes the version 0.3 of my Ganbarou (頑張ろう [gambaroo] = Japanese for "Try your best!!") ROM.
This ROM is made for tablets like pov Mobii, Viewpad 10s, Smartsurfer 360 MN10U, that have an internal 3G modem and GPS. Of course it works on similar tablets like the Advent Vega, XVision, ...
My main goal is to get a ROM that gives full support to 3G and GPS and be as stable and fast as possible.
Download link:
Ganbarou ROM V0.3
Screenshots, changelog and tips:
Ganbarou (頑張ろう = Japanese for "Try your best!!") ROM V0.3
Changelog V0.3b
Added NTFS automount (Again many thanks to the_corvus for the scripts)
Changelog V0.3a
Fixed small bug with TPUtility. It crashed due to some wrong libraries.
Changelog V0.3
New kernel - CorvusKernel 0.2 (Many thanks to the_corvus for compiling a stock version of his very fast kernel)
Bluetooth problem solved
Changed file manager from Astro to standard Android file manager (taken from CM7 ROM).
Removed NI keyboard (can be downloaded and installed from here)
Name spelling corrected
Overclocking [source]:
Method 1:
Get SetCPU from the market (or here from XDA) and select autodetect on the first start (if you have started earlier, must press menu and press the left button "device"). Then you can move the slide to 1500000 (or whatever speed you want). You can define profiles as well. Seems to work on my ROM.
Method 2:
Download CPU Meter from market. It must detect the freqs and let you use them. Don't change any other parameter, use at your own risk.
USB host mode [source]:
Press power button, once display get power (you will see the difference), press back button and hold until finish booting.
Have fun and give me feedback.
And as usual: You use this ROM on your own risk. I am not responsible if you break your device, loose warranty, get into a fight with your wife or loose important company data from your SDcard.
THIS ROM RUNS BY DEFAULT ON 1.5GHZ OVERCLOCKING. GET SETCPU OR CPU METER FROM THE MARKET TO REGULATE THE SPEED. PERMANENT OVERCLOCKING MIGHT DAMAGE YOUR TABLET. YOU GOT THIS WARNING HERE AND I DO NOT TAKE ANY RESPONSIBILITY IF YOUR TABLET ENDS UP BURNING.
Click to expand...
Click to collapse
Some screenshots:

You can use the Host Mode Indicator on this ROM as well, as I use the CorvusKernel 0.2
​

Hi,is the wifi location fixed?
Sent from my vega using Tapatalk

BeeGee_Tokyo said:
Overclocking [source]:
Method 1:
Put the setcpu.txt file attached in the root of your sdcard and then start setcpu (if you have started earlier, must press menu and press the left button "device") then select the bottom button (custom freqs) then you can move the slide to 1400000.
Method 2:
Download CPU Meter from market. It must detect the freqs and let you use them. Don't change any other parameter, use at your own risk.
Click to expand...
Click to collapse
Overclocking freqs with CorvusKernel 0.2 are autodetected, so no need of setcpu.txt... it Corvus5 works, and may work in any other rom, lets setcpu autodetect freqs.
Corvus.

corvus said:
Overclocking freqs with CorvusKernel 0.2 are autodetected, so no need of setcpu.txt... it Corvus5 works, and may work in any other rom, lets setcpu autodetect freqs.
Corvus.
Click to expand...
Click to collapse
Didn't know this Much better then. Will test and change my post.
Thanks for your great support!
[EDIT]
Yes, it works, SetCPU set to autodetect and it shows 216MHz to 1.5GHz.
Your kernel is really a super thingy!
[/EDIT]

malvern said:
Hi,is the wifi location fixed?
Sent from my vega using Tapatalk
Click to expand...
Click to collapse
Have to check it for WiFi. At least it gets location from the 3G, as it says at the moment that I am in Makati City, Manila, Philippines, but the position is around 100m from my real location.

New version is up.
Changelog V0.3b
Added NTFS automount (Again many thanks to the_corvus for the scripts)

Thank you for this great Rom.
It is very fast and stable, without tweak.
But I have a problem: I would like to use my Huawei E1750 Dongle. Unfortunately it is not supported.
I have worked with him a AT-command. (AT^U2DIAG=0)
I can not create a new APN. The APN can not be stored.
3G and GPS I can enable.
I hope you can help.
In the German forum (http://www.android-hilfe.de/pov-mobii-tegra-tablet-10-2-advent-vega-forum/),
many would appreciate a Huawei Ünterstützung.

veryjo said:
Thank you for this great Rom.
It is very fast and stable, without tweak.
But I have a problem: I would like to use my Huawei E1750 Dongle. Unfortunately it is not supported.
I have worked with him a AT-command. (AT^U2DIAG=0)
I can not create a new APN. The APN can not be stored.
3G and GPS I can enable.
I hope you can help.
In the German forum (http://www.android-hilfe.de/pov-mobii-tegra-tablet-10-2-advent-vega-forum/),
many would appreciate a Huawei Ünterstützung.
Click to expand...
Click to collapse
Hallo nach Deutschland!
Unfortunately there is not much I can do, either a specific dongle is supported by the included drivers or not.
But it seems there are people who got the E1750 working on the tablet.
Check T-Mobile Dongle for Advent vega.
Make sure you have the tablet in USB host mode by rebooting and pressing the back button from the moment the tablet starts booting until you see the lock-screen or launcher again. To check if you are in host mode you can use the gridhostmodeindicator.apk from ptbw.
Are the lights on the dongle going on and into a stable condition?
You can change and save an APN only if the connection to a provider is set. What provider are you using? Most German providers should be in the APN list already. You can check apns-conf.xml file in /system/etc to see if your provider is in with the correct settings.

Have to say, i have flashed just about every rom on the net for the Vega and this is the best yet. Flash is flawless and iplayer works just as it should. Have my Vega oc to 1.4ghz and all is good.
What plans do you have for future improvements?
Thanks, Dave.

daveyacarter said:
Have to say, i have flashed just about every rom on the net for the Vega and this is the best yet. Flash is flawless and iplayer works just as it should. Have my Vega oc to 1.4ghz and all is good.
What plans do you have for future improvements?
Thanks, Dave.
Click to expand...
Click to collapse
Improvements will be more for users with internal 3G/GPS modem. Plan to have the 3G active automatically after boot and GPS selectable in the settings (which is greyed out today).
I am not really a cook, I just mod ROMs to my personal needs and sometimes other people like them as well.
There are a few bugs (like 216MHz hang, battery load hang) that I cannot fix, as I have no idea how to compile a kernel or a ROM.

@BeeGee_Tokyo
あなたの答えてくれてありがとう
I think I have tried everything.
The problem is definitely the E1750.
I've ordered a Huawei E172. Come back tomorrow.
Hope to achieve an improvement.

I'm just about to upgrade to v1.0, but one problem I had with this one was that the power button didn't turn the screen off.
I constantly had to suspend it.
Also, gallery won't allow you to set a wallpaper. This causes a forced close.

soopahfly said:
I'm just about to upgrade to v1.0, but one problem I had with this one was that the power button didn't turn the screen off.
I constantly had to suspend it.
Also, gallery won't allow you to set a wallpaper. This causes a forced close.
Click to expand...
Click to collapse
Gallery - Wallpaper problem is solved.
Suspend by power button is not in. Need to do some investigations to get this as well. Sorry.

is this only for rooted devices ?
i have a pov genii trackball as well .
any chance to upgrade to 2.2 ?

ANDREI2J said:
is this only for rooted devices ?
i have a pov genii trackball as well .
any chance to upgrade to 2.2 ?
Click to expand...
Click to collapse
Sorry I do not know the POV Genii Trackball tablet. And i do not think that my ROM is working on it.

[ROM] CyanogenMod 7.2.0 RC0 for Samsung Epic 4G SPH-D700 - Now with WiMAX!

CRISIS AVERTED. NIGHTLY-9 IS EXPECTED TO BE SAFE. NORMAL PRECAUTIONS APPLY.
CyanogenMod is a free, community built distribution of Android 2.3 (Gingerbread) which greatly extends the capabilities of your phone.
THIS IS NOT SAMSUNG TOUCHWIZ AND NEVER WILL BE. DO NOT ASK ABOUT IT. THANK YOU.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is an AOSP-based build with extra contributions from many people which you can use without any type of Google applications. I found a link from some other project that can be used to restore the Google parts, which can be found below or elsewhere in the thread. I've still included the various hardware-specific code, which seems to be slowly being open-sourced anyway.
Visit the CHANGELOG for a full list of changes and features!
QBKing77 was kind enough to produce a couple of videos about Epic's CM7
Please note that these were done before WiMAX was released.
How to Install
Review
INSTRUCTIONS:
- First time flashing CM 7 to your Epic (or coming from another ROM)?
Unlock/root your device and install Clockwork Recovery
Do a Nandroid backup!
WIPE
Install the ROM
Optionally install the Google Addon
- Upgrading from earlier CM7 or nightly build?
Do a Nandroid Backup!
Install the ROM (your Google apps will be backed up automatically)
HOW TO REPORT BUGS OR PROBLEMS?
Was it a soft reboot or a "boot loop"? Run "adb logcat" and get me the full output.
Pastebin links preferred
The current buglist:
Native tethering does not work with WiMAX. Enabling either WiFi or USB tether will disconnect WiMAX until tether is turned off. Third-party wifi tethering apps are known to work.
WiMAX Toggle Widget is Broken.
Attempting to use it may cause the notification bar to force-close. You can disable the widget entirely in the CyanogenMod Settings menu.
WiMAX can be managed through the Wireless & Networks system setting screen.
NOTE: There is a third-party WiMAX Toggle Widget on the Android Market. It is not free, but has been reported to work on NS4G. Work toward implementing a functioning native toggle widget is ongoing.
New Changes:
WiMAX (uberpinguin, mkasick, wispoffates)
Fixed camcorder media profiles for smoother recording and better auto white balance. Also adds "HD" profile. (Decad3nce)
Torch toggle button in PowerWidget (noobnl)
New WiFi driver from Aries kernel. Fixes native WiFi Hotspot and toggle button.
Download Links
NIGHTLIES. FLASH AT YOUR OWN RISK.
md5sum: ddb0c474d8fbf2e8711938b903f7ce0b update-cm7.2.0-RC0-Epic-WiMAX-signed.zip
Mirror 0 courtesy of Rodderik in irc.irondust.net/#epic.
Mirror 1 courtesy of bonsaikitten and dev.gentooexperimental.org.
Mirror 2 courtesy of Hydr0p0nX from irc.irondust.net/#epic.
Mirror 3 courtesy of Facebonez in irc.irondust.net/#epic.
Mirror 4 courtesy of likewhoa in irc.freenode.net/#gentoo-chat
GAPPS
Download google applications
Google Talk with video addon
Mirror: link
Mirror: link
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
Changes:
Fixed brightness control (noobnl)
WiFi Hotspot (decad3nce, noobnl, uberpinguin)
Fixed bad cached download mounts (noobnl)
Fixed overlay for video encoding/decoding (decad3nce & noobnl)
Fixed e911(mkasick)
Fixed most of the dhcpd clusterfuck(a couple more issues left)
Fixed init.d
Fixed cache errors
Fixed issues with logwrapper
MTD/yaffs2
Stage1/Stage2 inits
Updates from upstream
Backup/Restore fixed
Updated prebuilt modules
2.3.7
Compiled kernel from source MAJOR THANKS to mkasick and Rodderik
Fixed torch overlay
Fixed MMS overlay
Fixed incoming call routing
Fixed mic feedback/whistling
Adjusted APN for MMS - receiving works, sending fixed
Fixed application notification LED based on a tip from DRockstar
Fixed haptic feedback with a patch from jt1134
I recommend using the EI22 modem.
Please note flashing someone else's kernel may ruin your experience with this rom and I advise against it. This rom is a result of many tiring hours from Decad3nce, noobnl, jt1134, Uberpinguin, nubecoder, mkasick, nullghost, dameon78, wispofattes, DRockstar, and many many other contributors.

This is an amazing feat.
We all need to be very greatful of our cm7 maintainers. It is amazing what they do...

Excellent work team!
Sent from my Kindle Fire using xda premium

Lol... CM7 for the EPIC will never have 4g cause it will take too long to figure it out. By the time it happens you'll be on a different phone!!!! Lol....
Great job guys!!!!!!
Sent from my SPH-D700 using Tapatalk

I guess this is as good a place as any. I haven't been able to find the answer in any related threads, but I was wondering if there is a special trick to getting Google Talk to use the front video camera in the fixed version linked in the OP. I've successfully connected with a friend of mine who has a Galaxy Nexus, but the PIP window showing my video has no option to switch to the front cam (in fact, it shows a lock icon instead).
The video transfers fine, but I just can't figure out how to switch cams. Again, I'm using the fixed version already, and I've flashed it several times over, and redownloaded twice with no change.

Woohoo!
This is MTD, yes?

Migital Warfare said:
I guess this is as good a place as any. I haven't been able to find the answer in any related threads, but I was wondering if there is a special trick to getting Google Talk to use the front video camera in the fixed version linked in the OP. I've successfully connected with a friend of mine who has a Galaxy Nexus, but the PIP window showing my video has no option to switch to the front cam (in fact, it shows a lock icon instead).
The video transfers fine, but I just can't figure out how to switch cams. Again, I'm using the fixed version already, and I've flashed it several times over, and redownloaded twice with no change.
Click to expand...
Click to collapse
Not sure. I haven't actually gotten gTalk to even offer video chat to me yet, even with the "fixed" version. If I can get that part working, I can test it further.

Krispy Joe said:
Woohoo!
This is MTD, yes?
Click to expand...
Click to collapse
Yes it is. It was the first mtd rom.
Sent from my SPH-D700 using XDA App

Getting 7108kbps from in my Anaheim office.
Native tether only uses 3g
Open garden is using 4g.
AWESOME

You guys are nothing less than amazing.
Sent from my SPH-D700 using xda premium

Which file system does this use?
Sent from my SPH-D700 using XDA App

Krispy Joe said:
Woohoo!
This is MTD, yes?
Click to expand...
Click to collapse
Yes, it is.

bigpapii said:
Which file system does this use?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
YAFFS2
Sent from my SPH-D700 using XDA App

ok couple of quick notes on the 4g. screen toggle doesn't seem to be able to turn off 4g.
turning on 4g doesn't disable wifi (dunno if this is good or bad)
hotspot doesn't use 4g to tether.
edit:: didnt' realize this was a new thread when i posted.. this is all addressed in the OP .. dur

For New CM7 Epic Users
For users new to CyanogenMod 7.2, as the OP says, this is not TW and it's very true. You will notice some things are different. Many differences are enormously beneficial, here are some petty little things you may miss. :] CyanogenMod is also not Sprint specific and some carrier specific tweaks are required.
:: Single press on capacitive buttons does not have haptic feedback
:: Instead of voicemail notifications, you'll receive text messages from 9016, they are intended for the Sprint VVM app which is not included - AmericanJedi001 has solutions for you - http://forum.xda-developers.com/showthread.php?t=1436785
:: By default, holding 1 does not dial voicemail - Settings > Call settings > Voicemail settings > Change *86 to your phone#
:: By default, long text messages are not split into 160 char chunks and may be turned to nonsense - Messaging > Settings > Enable SMS split
:: Camera button may turn screen on if phone is not fully asleep - Resolved, flash nightly 14 or later.
:: *p00f* your smiley button is now an @ button - http://forum.cyanogenmod.com/topic/39546-cm7-discussion-of-nightlies/page__view__findpost__p__281607
:: LED charging indicator works differently, red while low, off while charging, weird color when charged
:: Video camera focuses differently - http://forum.xda-developers.com/showpost.php?p=21015903&postcount=974
:: Samsung dock audio redirection through USB is not supported in the stock CM7 kernel
:: VodooSound kernel extensions are not included in the stock CM7 kernel
:: CM7 doesn't have a function for updating your PRL - http://forum.xda-developers.com/showpost.php?p=20927995&postcount=699
Frequent Flyers, PM corrections and other topics that get brought up time and time again and I'll try to address them here.

UberPinguin said:
Not sure. I haven't actually gotten gTalk to even offer video chat to me yet, even with the "fixed" version. If I can get that part working, I can test it further.
Click to expand...
Click to collapse
Are you sure you have friends that have enabled video capabilities? Even that might not help, since when I changed my settings to enable video and voice chat, my friend still wasn't seeing the video cam icon next to my name on his list.

For what it's worth, I was able to test the G+ Messenger app's "Hangout" video chat, and it seems to work with FFC.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There is it. What once was said to be the furthest most unlike bug to fix.
Great work to everyone who made it possible. My offer still stands any of you (devs) come through Richmond, VA I'll get ya a few beers.
Sent from my Cyanogen Epic.

4g is getting great signal here in DC, plus 4G notification 'check'............................cm7 zippy + responsive, this makes an amazing difference.......hats off to all of the devs that have contributed to this!..........you have outdone yourselves, well done!
Sent from my SPH-D700 using xda premium

roghaj said:
Getting 7108kbps from in my Anaheim office.
Native tether only uses 3g
Open garden is using 4g.
AWESOME
Click to expand...
Click to collapse
I'm actually getting 1500kbps in Detroit, which is 3x faster than I've ever gotten with wimax here. Is it possible that stock Froyo just didn't do a good job of handling the 4G signal, or is it more likely that Detroit got an upgrade?

[ROM][64BIT][8.1] UNOFFICIAL LineageOS 15.1 for LG STYLO 2 PLUS

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 8, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Video Playback
Audio
Sensors
GPS
FingerPrint
tap 2 wake
Known issues:
Volte
you tell me!
Follow Instructions Carefully otherwise you will get error :
Use this 64 bit twrp to flash http://www.mediafire.com/file/i1911qqxlx9v6sm/twrp-3.2-x64-ph2n.zip
Wipe cache, dalvic cache,system,data
Flash ROM-Flash Gapps [Arm64-8.1]
Done-Reboot Now
Enjoy the clean rom
Downloads :
https://www.mediafire.com/download/t9b8g097ihhu7b4
Credits:
Lineage Team
Please Consider donating if you appreciate my work
https://paypal.me/messi2050
Sources:
Device:
https://github.com/messi2050/android_device_lge_ph2n
https://github.com/messi2050/android_device_lge_msm8937-common
Kernel:
https://github.com/messi2050/android_kernel_lge_msm8937
XDA:DevDB Information
[ROM][64BIT][8.1] UNOFFICIAL LineageOS 15.1 for LG STYLO 2 PLUS, ROM for the LG Stylo 2 Plus
Contributors
messi2050
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Nougat bootloader
Version Information
Status: Abandoned
Created 2018-05-03
Last Updated 2019-05-09

Reserved
2018-june-13 build changelog:
-June security patch
-Update power scripts from last caf
-Fix vendor mismatch error message
-enable dual wifi bands
-build using last sources

Thanks for the ROM, messi, it's greatly appreciated even if development stops cold after the post you just made.
And for those that might care, the MD5 of the archive is: 00dd56ee08963da05195915dd528d9b1

The headphone audio output on this ROM is rather weak, but that's not messi's fault, it's because of how Oreo is working on this device. There appears to be no mixer_paths.xml file in Oreo now, and I added the older mixer_paths.xml (with permissions 0644 as required) with the necessary adjustments to boost the audio output from the default of 84 to 92. It had zero effect so it seems the audio subsystem in Oreo is now working differently for whatever reason, not sure if there's a way to adjust the defaults at all.
Also, the kernel for this ROM appears to be defaults to just 6 core operation: I've installed the ROM twice now on my S2P and when I check the core activity with CPU-Z it always shows 2 little cores active, 2 offline (always), and all 4 big cores active. And of course the minimum CPU speeds are 960 for the little cores and 768 for the big cores - they should be (or at least I should say they could be set in the kernel parameters down to the minimum of 384 MHz and that would save a bit of battery life.
Overall it's been great so far, really, everything seems to work fine. The flashlight didn't work so I installed a flashlight app then suddenly the toggle started working so, there's something funky going on there but everything else so far has been great. Would be nice if there was a more customized kernel available, yes, with more governors and perhaps even some undervolting potential but I know this device just doesn't have much developer love at all.
Regardless, it's very cool to be able to run Oreo 8.1 now since I have never really given a damn about it at all previously. I may go back to running the stock T-Mobile 20a rooted ROM on my S2P however, it depends on how things work out.
:good:

br0adband said:
The headphone audio output on this ROM is rather weak, but that's not messi's fault, it's because of how Oreo is working on this device. There appears to be no mixer_paths.xml file in Oreo now, and I added the older mixer_paths.xml (with permissions 0644 as required) with the necessary adjustments to boost the audio output from the default of 84 to 92. It had zero effect so it seems the audio subsystem in Oreo is now working differently for whatever reason, not sure if there's a way to adjust the defaults at all.
Also, the kernel for this ROM appears to be defaults to just 6 core operation: I've installed the ROM twice now on my S2P and when I check the core activity with CPU-Z it always shows 2 little cores active, 2 offline (always), and all 4 big cores active. And of course the minimum CPU speeds are 960 for the little cores and 768 for the big cores - they should be (or at least I should say they could be set in the kernel parameters down to the minimum of 384 MHz and that would save a bit of battery life.
Overall it's been great so far, really, everything seems to work fine. The flashlight didn't work so I installed a flashlight app then suddenly the toggle started working so, there's something funky going on there but everything else so far has been great. Would be nice if there was a more customized kernel available, yes, with more governors and perhaps even some undervolting potential but I know this device just doesn't have much developer love at all.
Regardless, it's very cool to be able to run Oreo 8.1 now since I have never really given a damn about it at all previously. I may go back to running the stock T-Mobile 20a rooted ROM on my S2P however, it depends on how things work out.
:good:
Click to expand...
Click to collapse
Mixer is moved to vendor/etc in o

messi2050 said:
Mixer is moved to vendor/etc in o
Click to expand...
Click to collapse
Geezus, I spent an hour looking for that information on multiple forums and websites and you're the first person to point out where it is, damn.
Thank you, thank you, thank you. Adjusted the default path name="headphones" from 75 to 90 and w00t, much much better now.

messi2050 said:
Mixer is moved to vendor/etc in o
Click to expand...
Click to collapse
I want to ask a question. This Custom ROM support the LG Stylus 2 Plus K520TR model?

There are two issues I've noticed, can't say they will, would, or do affect other people and I'm using the MetroPCS model with T-Mobile (I was using the T-Mobile stock ROM originally).
- the Mobile Hotspot does not function. It says it's working in the Settings submenu but the actual hotspot never does function, it never shows up as a visible AP for another device to connect to, the SSID is not broadcast, etc
- the USB options when you plug in a USB cable will not stick, I've got into the Developer Options and I have it set to always MTP and every single time I plug in I have to go manually change it from charging to MTP to get it working
They're not massively important things but for me the Mobile Hotspot could be useful for my Wife when we're out and about; her Flex 2 doesn't have cellular service so in the past she'd just tether to my Stylo but now that's not possible.
Not sure this can even be resolved given the nature of the usage but it would be nice to have those two nitpicks working properly. Aside from that this ROM so far has been spectacular: I'm getting 7+ hours of SOT at 50% brightness, with cellular and Wi-Fi enabled constantly, and using L Speed to handle background performance.
So far so good.

I am getting a vendor ID error every time I restart the phone. T-Mobile version stylo. Clean install followed to a T. I also noticed some games aren't working either like they cannot community ate with the server mainly Paladins strike that game also starts with an error.
I'll try to screenshot the error and write it down as well as the vendor id it says I need to match

Did a full reflash and the vendor id error persists. Also not sure if its because of that but most of the apps and games I try to play are giving me network errors and not downloading the content. I can download from the app store no problem but its within the app that problems with network start. My APN is correct as well.
Wondering if I missed a nougate update that is causing the vendor id error.

rsuthers08 said:
Did a full reflash and the vendor id error persists. Also not sure if its because of that but most of the apps and games I try to play are giving me network errors and not downloading the content. I can download from the app store no problem but its within the app that problems with network start. My APN is correct as well.
Wondering if I missed a nougate update that is causing the vendor id error.
Click to expand...
Click to collapse
I believe the vendor id is used to pass safetynet easier. Expected behavior

Anything going on with this rom?

rsuthers08 said:
Anything going on with this rom?
Click to expand...
Click to collapse
@messi2050 said he was done with this phone and I haven't heard anything from him since, so no. @deadman96385 @Travisholt92 @xRaZeR_FuZioNx and @cospalet are all working on roms still. If you wanna talk to them and see what their plans are, we have a telegram group, but you'll have to find it yourself

Ya I'm not looking to pay for nightlies of an unfinished rom

The ROM works, the only thing that doesn't for me is the hotspot but that's a given anyway and nothing can really be done with it.
Only thing I wish we had at this point is a custom kernel to get the idle speeds down from the current ones of 960/768, they should be 384/384 and it would help with battery life (which is fine even in spite of this current limitation). Maybe some more governors would be nice too but so far I've been running this ROM since it was put out and haven't had a single thing to legitimately complain about unlike others it seems.
Use it, don't use it, but for Pete's Sake® STFU about it and messi, will ya?

I just got my computer up with 14.04.5 TT and set up my build envir. I just need the time. I cant leave my computer set up at home right now and thats where i have the best connection. Its my first time so i intend to do a couple dry runs first, maybe play around with the kernel. But i never have to time to get rling with it

Google lens
I can't believe it but Google Lens actually works on this ROM. I haven't done a lot of testing but so far so good.
---------- Post added at 06:08 AM ---------- Previous post was at 05:42 AM ----------
I can't believe it but Google Lens actually works on this ROM. I haven't done a lot of testing but so far so good.
Edit, I haven't found anything not working.

rsuthers08 said:
I am getting a vendor ID error every time I restart the phone. T-Mobile version stylo. Clean install followed to a T. I also noticed some games aren't working either like they cannot community ate with the server mainly Paladins strike that game also starts with an error.
I'll try to screenshot the error and write it down as well as the vendor id it says I need to match
Click to expand...
Click to collapse
Did you ever find a fix for the mismatching vendor.img? I feel dumb bit its been years since i've fiddled with android internals. They've change quite a bit since lollipop lol

lixer8 said:
Edit, I haven't found anything not working.
Click to expand...
Click to collapse
So, for you, if you have cellular service, can you test out the hotspot functionality and let me know if you're successful with getting it to work? It's the only thing that doesn't work for me, so I switched back to the 7.1.1 ROM where it works just fine. I'd love to continue using the 8.1 ROM but without that hotspot it's a problem.