[Q] CWM hangs on splash screen new G tablet - General Questions and Answers

Brand new G tablet.
CWM Version 08
BL 1.2-4349
no external sd card
Internal version of CWM
Unzipped the file for cwm into the root of the tablet. Followed instructions to load and it worked the first time. The next time and all subsequent times I have used the + and power to turn it on I see the little notification "recovery key detected" then "booting recovery kernel image" and does nothing else. I can reboot the machine and it will start so it is not bricked. I just can't get CWM working to install Vegan Gingerbread.

Thank you all and yahoo!
After 8 hours of searching and trying out suggestions I finally ended up downgrading from BL1.2-4349 and everything went smoothly just like the instructions said they should. I would have been here 9 hours ago when I started this project. Yes, I am a noob but I must point out only one person was adamant enough to convince me to try it. I havent done anything like this before so I apologize if I asked questions that were already answered. I just didn't know were the answers were.
Once again, thank you very much for the assistance and the learning experience. You were instrumental in this endeavor!

Related

[Q] Thanks! (and HELP!)

Just joined to say thanks to Roebeet and everyone who is active in this forum. Because of the obvious potential of the gtablet being explored here, and discussed on phandroid.com I decided to take the plunge and purchased one tonight. I might have passed this tab by, and waited months for something else...
--and here's where I cry for help!
I carefully followed a series of step-by-step instructions I found thru google, to install the latest tnt lite found here on XDA. Everything seemed to work without a hitch, and was prouder than a pappa to have completed my first root and mod ,ever!
BUT right after I DL'ed and installed the flash 10.1 apk things went south. The browser constantly crashed to the home screen, and the market and email apps were crashing also. I rebooted and now I am greeted by the tnt setup screen that is covered in an endless wave of crash warning dialogs! I can't tap them away fast enough to see the desktop.
I've tried to do a recover, but I can't get thru the setup (that keeps crashing to the first screen also) to use the USB to mount the internal mem to my Mac.
I am insanely happy about the potential of this hardware, but I've painted myself into a corner. ANY help would be greatly appreciated.
And yes, I do look very handsome in my profile pic.
From bad to WORSE!
I discovered the dcom222 thread that describes my problem and details a solution. I followed it to the letter, changing the command and using my microSD as a secondary boot to reinstall the vanilla tnt ROM.
But then it just stuck on the tnt logo, faded in and out 3-4 times, and went dark! The device won't turn on or off (had a full charge when I pulled it from the wall socket a few moments ago)
Please tell me I haven't bricked this thing!
still no luck...
I was able to power the unit back up, but I've tried to recover and flash all three setup files I have (vanilla tnt, ota update tnt and tnt lite 2) but nothing works!
All of them create a loop of some sort, whether it's the viewsonic screen, gtablet screen loop, or the tnt logo screen blinking on and off, NOTHING boots to the desktop.
Going to bed before I drive my self insane. Hopefully someone in the know will reply by the time I check this at work.
thanks in advance
You have not bricked it, don't worry. This device is very hard to truly brick. If all else fails there is nvflash or the apx mode fallback. But I don't think you need that if you are still able to boot to clockwork recovery.
In clockwork go to advanced - mounts and try mounting and unmounting your partitions. I suspect your user partition may be screwed. This seems to happen fairly frequently especially the first time you flash a ROM. It happenend on my first flash and not again since. Clockwork lets you repartition though. Search the forum for partition fix, its not too big a deal.
If that fails try roebeet's thread on nvflash recovery for TNT lite. If that fails, search for APX mode.
As far as I know there are zero bricks from ROM flashing so far.
Sent from my SMB-A1002-3G using Tapatalk
Life in LA said:
Just joined to say thanks to Roebeet and everyone who is active in this forum. Because of the obvious potential of the gtablet being explored here, and discussed on phandroid.com I decided to take the plunge and purchased one tonight. I might have passed this tab by, and waited months for something else...
--and here's where I cry for help!
I carefully followed a series of step-by-step instructions I found thru google, to install the latest tnt lite found here on XDA. Everything seemed to work without a hitch, and was prouder than a pappa to have completed my first root and mod ,ever!
BUT right after I DL'ed and installed the flash 10.1 apk things went south. The browser constantly crashed to the home screen, and the market and email apps were crashing also. I rebooted and now I am greeted by the tnt setup screen that is covered in an endless wave of crash warning dialogs! I can't tap them away fast enough to see the desktop.
I've tried to do a recover, but I can't get thru the setup (that keeps crashing to the first screen also) to use the USB to mount the internal mem to my Mac.
I am insanely happy about the potential of this hardware, but I've painted myself into a corner. ANY help would be greatly appreciated.
And yes, I do look very handsome in my profile pic.
Click to expand...
Click to collapse
Scroll down to post number #869 http://forum.xda-developers.com/showthread.php?t=842004&page=87
feeling better
Thanks for the assurances that I didn't wreck the device, and pointing me to some solutions. I have a few questions:
what is clockwork mod? If I am able to recovery boot from my micro SD card, do I already have it? (I downloaded a bunch of recovery images to start, per instructions)
If it's something I still need to download, is it a PC application? How am I supposed to change settings in it (manage partitions, etc) if I can't get the tablet to boot?
-- stuck at work and dying to get home to fix this thing...
Ok, more detailed instructions:
If you press and hold down Volume + when you are pressing the Power button to boot up, and keep holding the Volume + key until you see a message that says "Detect a Recovery Key Pressed", that should get you to a text menu from which you can navigate using the volume +/- keys and the Home soft button to flash ZIP files and do other things. That menu is ClockworkMod Recovery. Since you remember installing a recovery.img, it sounds like you probably (hopefully) have ClockworkMod Recovery on there.
If you get to ClockwordMod Recovery, you can go down to the Mounts and Storage option, then you will find the "Mount USB storage" option at the end of that list. That lets you plug in and mount your internal memory area as a standard USB drive to your Windows or Mac computer to copy over new ZIP files and the like to your G Tablet.
You can also check that partitions are all mounting and unmounting successfully in that menu. If you go instead into the Advanced menu, you will see Partition SD Card, which I believe is what you might need to do at this point.
If booting with the Volume + button held down doesn't get you anywhere and you see nothing about Recovery Key Detected and don't see any text menu, then you don't seem to have a working recovery. At that point you'll have to do what phfaty suggested, read the post he referenced, and follow the link therein to the tegratab forum post to get the NVidia Tegra SDK installed on your Windows desktop and use the NVFlash tool and APK mode (where you hold the Volume - key down while booting instead of the Volume + key) to reflash your tablet.
still not working...
The good news:
I do have clockwork mod installed. Must have been in 1 of those zips or rars I ran in the very beginning.
The bad news:
it's still caught in a boot loop. I've mounted it as an external drive 3 times now from clockwork, and tried all 3 versions of the operating system (vanilla, vanilla with the ota and tntlite 2) and NOTHING makes a difference.
Life in LA said:
The good news:
I do have clockwork mod installed. Must have been in 1 of those zips or rars I ran in the very beginning.
The bad news:
it's still caught in a boot loop. I've mounted it as an external drive 3 times now from clockwork, and tried all 3 versions of the operating system (vanilla, vanilla with the ota and tntlite 2) and NOTHING makes a difference.
Click to expand...
Click to collapse
1)Boot into clockwork.
2)Navigate to Advanced menu
3)Choose partition sdcard
4)Choose data partition desired size(1024=1GB)
5)Choose 0GB for the next selection(swap not used)
6)Do a factory reset from main menu
7)Reboot
8)If that doesn't work, then reinstall ROM, then reboot
UPDATE
partitioning the drive and wiping the user data did the trick. I'm up and running again. thanks to all who chimed in to help.

[Q] Power wont Stay on cannot get into APX mode

I have been following similar threads, but there seems to be just enough that is different with my Gtab I thought I would try a new one in my last ditch effort.
I have most been runnung Tnt lite and everything worked fine. Then curisoity got to me and I installed the Cyrogen 7. I was having issues with gapps and followed instructions until it wouldn't boot past the BitTrix presents....
I was able to get into CM but after all the formarts and such from the intructions on gapps I no longer had any backs or recovery files.
Then I tried the NVflash. First problem is that I could never confirm I was in APX mode. My Linux CentOS machine could see the gtab but the NVFlash would not run. So a pal of mine who is really good with Linux grabbed tnt lite and was able to directly transfer it to the SD card.
Everything looked hopefull until just before the home screen should appear it powers down. then I when into CM and re-installed tnt. Same problem so I go back to CM and try to mount data. I get an error that it doesn't exisit. then it powers down in CM. Each time I go into CM it shuts down sooner and sooner.
I opend the device up and completed a manual reset to no sucess. I hear people say its really heard to brick these things. PLEASE someone help show me that I am not that talented!
no help?
17 views and no replies? Someone has to have something for me right?
Hi
OK, i am no expert here but have you tried just putting a new ROM zip file onto your SD card and rebooting into recovery mode Power & Volume + and choosing the zip file you just copied over?
Works for me everytime but then mine has never died.
Ian
Ianmrr said:
Hi
OK, i am no expert here but have you tried just putting a new ROM zip file onto your SD card and rebooting into recovery mode Power & Volume + and choosing the zip file you just copied over?
Works for me everytime but then mine has never died.
Ian
Click to expand...
Click to collapse
My main issue now is that the power wont even stay on long enough to get to that point.
Instructions if you have a brick.
http://forum.xda-developers.com/showpost.php?p=11230514&postcount=1
mkuzminov said:
Instructions if you have a brick.
http://forum.xda-developers.com/showpost.php?p=11230514&postcount=1
Click to expand...
Click to collapse
These are the instructions I followed when I opened it up. This did not work for me. You can see I posted in that thread as well.
Through all the message boards I read, not one single person including myself thought of the most basic answer.......The battery was dead
I work on computers for a living and this is yet just another example of starting with the basics, no matter what you think your skill level is.
Once charged, I was able to read the zip off of the card. Flashed and everything was great. Until I dropped it, literally minutes afte I got it working.
I am starting to think I wasn't meant to use this tablet.
I guess we all ASSUMED that you had charged it, or at least were trying w the adaper plugged in... I know that was what I assumed ...
Jim

[Q] Stuck in a reboot loop, please help

I got my Viewsonic GTablet on Friday (2/11/2011). I loved it and had no issues. I downloaded and installed the update from Viewsonic. I visited the Marketplace that's installed on the device and downloaded some apps, mainly games. Today (2/14/2011) I took it to my university and tried to get on the campus WiFi. I had difficulties, so I took it to the IT department on campus to get some help. They took my device, tried to get it on the network and said that my device could not get on the network because their network uses certain "secure credentials" or something like that. As soon as I get my device back from them, every time it boots up I get and error message that says that Dashboard Home has stopped unexpectedly and to try again. I called Viewsonic's Customer Service, and they determined that I was stuck in a reboot loop. I have tried rebooting the kernel more time than I can count, but it doesn't do anything to help.
Has anyone else been able to solve this problem? I would take it back to the store I bought it from (Office Depot) to get an exchange, but they don't have one in stock anywhere close to where I live, and I don't have the box the device came in anymore.
What do you suggest I do?
The device is running the stock OS with the update from Viewsonic. The only apps I have installed are from the marketplace that comes with the device. I have not tampered with the OS or settings. I am also mildly technically challenged, but I am working on educating myself.
I appreciate any and all help. Thanks in advance. I also apologize if this has issue has already been posted and answered.
vafalla,
This doesn't sound like the boot loops I had, but I guess if it doesn't get you to a screen you can work with the result is the same.
If it were me I would get on a PC and go the the Development part of this forum. I think you need to get ClockWorkMod installed. CWM is a replacement "recovery" program that gives you other functionality to restore, communicate, partition drives and a bunch of other things. There are a couple of threads in the Dev section that tell how. You can download CWM v.08 (the older one works!) and put the update.zip file on a microSD card and edit the recovery folder "command" (no .txt or other ending, just command) file in Notepad to load "sdcard2" instead of sdcard. then put the card in the gtab and reboot holding down the Vol+ key down. You'll get a message in the upper left corner of the screen that recovery is loading. After it installs, if it doesn't startup, reboot with the Vol+ key down again and you should be able to get into CWM.
From there, you can find the CWM partition command and change the two partitions to 2048 and 0.
From there, there are a bunch of threads which tell how to load either a stock recovery file to get back to stock -- or how to load VEGAn 5.1 (or now, 5.11).
Hope this helps get you started. I just didn't want you to think your tab is bricked and that all hope is lost!
Rev
P. S. --- Some of the other threads may have better instructions than mine!!!
Thanks so much for the help! I'll get right on it and see what happens.
Plug in your gtab to the power and see if it boots. Could be they ran your battery down.
Bootloop help
If you really want to learn about the gtablet, youtube ehunyadi. he has done over 10 excellent videos and his most recent is how to install CWM and TNT lite 4.2..sounds like only diereence for you is you'd install CWM to microsd.

[Q] HELP Phone not booting anymore, no recovery

Hello everyone, I just got my Inspire 3 days ago, rooted yesterday with the bubby232 simple one click root. Today I attempted to flash CM7 onto it, so I followed the instructions in development forum but after going into recovery, the screen stayed black. I hit power, and first time it rebooted normally. I went back and tried the backup again, and now my phone doesn't boot at all
I can get into HBOOT, but recovery doesn't do anything, it just gives me the black screen. I do have S-OFF.
Any help? I apologize ahead of time if there was another thread like this, I didn't find it.
there is actually about 20 or more threads like this, browse through general you will find a thread I have posted, Called cwm blackscreen? look here before posting.
Please use the search feature next time, it will save you time and get you answers quicker.
serialk11r said:
Hello everyone, I just got my Inspire 3 days ago, rooted yesterday with the bubby232 simple one click root. Today I attempted to flash CM7 onto it, so I followed the instructions in development forum but after going into recovery, the screen stayed black. I hit power, and first time it rebooted normally. I went back and tried the backup again, and now my phone doesn't boot at all
I can get into HBOOT, but recovery doesn't do anything, it just gives me the black screen. I do have S-OFF.
Any help? I apologize ahead of time if there was another thread like this, I didn't find it.
Click to expand...
Click to collapse
Please do a search for something before you start new threads.
http://forum.xda-developers.com/showthread.php?t=1019868

Moto G (falcon) - Recovery img problem

Ok, I've been reading around the forum for about a week, trying to solve a problem with an original moto g (falcon). Basically my cousin got the moto g a few years back, and I, in my ignorance, tried to root the device for him. What I can remember was oem unlocking the bootloader with Motorola's unlock code through their website and adb. then my cousin freaked about the warranty warning on the boot animation, and decided against it. So cut to now, I'm a little more experienced, the phone's years old now, and he'd like to refresh it with a new rom, which I suggested, trying to help him. So forgetting what I'd originally done those years ago, I started the process of rooting the phone, installing a custom recovery, to hopefully put a lighter rom on it for him.
OK so it's a UK Retail on tesco mobile, moto g xt1032 running Android 5.1.
in bootloader menu it says "Device Locked status 2", dunno what this is in relation to.
first I checked the bootloader was still unlocked, and adb said it was. so I tried to use CF-autoroot to finish the job, but there was issues. it restarted the phone into fastboot mode, but when the script started, pc end did nothing, on the phone it said, "flashing unlock" and just sat there for 10-15mins doing nothing (i left it the time, just incase it was doing it).
So i read a little more, and found because i'd already unlocked the bootloader, I could just flash a custom recovery and root from adb? so I downloaded the latest twrp and tried. I was unable to do so. it said the partition wasn't the right size? should have documented it, but really didn't expect to run into any problems.
So I restarted and tried to do my usual fallback, and flash the factory image and start again, But couldn't find a source for the specific img, and tried to keep fighting on.
So I noticed that the phone wouldn't respond to adb or fastboot once in fastboot mode, when in android with usb debugging, no problems, in fastboot, didn't show up as adb devices?
I tried booting into the recovery from the bootloader menu, and got a no command. So there isn't a recovery, and I can't flash a new one? if i could find the stock recovery, I would try that.
so apart from deleting all his apps and settings, I hadn't solved the problem at all, and had to leave the job there as I couldn't find a solution.
I know this isn't the most detailed, but I've done this with quiet a few phones now, and felt I was pretty competent. I see everyday as an excuse to learn more, and like to think I have humility. So, I'm assuming I did something those years ago to damage the recovery? I'm running out of ideas, and was hoping someone could point me in the right direction?
I've lurked on xda for years, and learned so much about this kind of thing through my past experiences, but I'm stumped this time, and feel obliged to resolve the problem, as it was me who caused it.
TL DR
Can't flash recovery, no command when I try to open recovery, trying to either factory image back, or root/custom recovery it.
any insight would be much appreciated.
Hi. I just rooted and installed CM13 on an old XT1034 about two days ago. I am also sort of a ROM noob, I have ROMed a few devices, but usually but following strict step by step guides I have found here on XDA. Over the years I have some minor understanding of the process now.
I also got the "No command screen" when trying to get into TWRP recovery. The issue seems to be that if you reboot via ADB and the ROM launches it will automatically rewrite the recovery to the stock one, and when you try to go to recovery from fastboot, it gives you the "no command" error. Apparently you can get to the stock recovery from there by a hardware key combo, something like holding up vol for 10 sec then a quick press of power (I can't remeber the exact key sequence or what forum I read it in). If it does this you have to reflash TWRP again. This issue is mentioned here (http://wiki.cyanogenmod.org/w/Install_CM_for_falcon) in step 8 about installing recovery. What I ended up doing was after the flash of TWRP via ADB, I manually powered down, then manually bood into fastboot by holding volume down and power, and selecting recovery. This was a bit fiddly and I had to attempt it a few times but eventually it worked and TWRP installed.
The issue with the phone not being recognized may be due to incorrect drivers. I had no issue with this because I installed the official driver package from Motorola. It is available in their website in the developer section. I don't have the URL right now.
Hopefully this helps, for me CM13 Official has been an a stable fresh start for this old device.

Categories

Resources