I just ordered last week (and received yesterday) one of these cases for my Sensation: http://www.ebay.com/itm/110724543299?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Not too shabby. It fits nice and snug, holes seem to line up well (there are few minor misalignments, but nothing too horrendous). One thing I like quite a bit is that the buttons are much easier to press on this than the other TPU cases I've tried, they made the material pretty thin in those spots and the buttons react like there's nothing in the way at all.
Looks decent and a good price.
I think I still like the Incipio NGP better, but this is a good fit, looks good and the price is right.
So I can comfortably recommend it.
Edit: Just to follow-up with a couple of other little things I'm noticing. There are a few slightly sharp edges from the molding that might annoy some people, but they aren't too bad.
Also - the back of the case is a matte black finish and the edge that wraps around the front is glossy. I'd prefer it all be the same color, but I can live with it like this.
Noticed you mentioned the incipio ngp. I just received the case yesterday because a few people on this board mentioned how good it is.
Well the incipio is a very nice case. Probably the best tpu case you can get for the sensation. Only problem it has is that the volume and power buttons are difficult to press. People have mentioned that after a period of time it becomes easier.
But overall it is a very nice case you'll enjoy it when you get yours.
Sent from my HTC Sensation 4G using xda premium
ayvecs said:
Noticed you mentioned the incipio ngp. I just received the case yesterday because a few people on this board mentioned how good it is.
Well the incipio is a very nice case. Probably the best tpu case you can get for the sensation. Only problem it has is that the volume and power buttons are difficult to press. People have mentioned that after a period of time it becomes easier.
But overall it is a very nice case you'll enjoy it when you get yours.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
I already have the Incipio, and I agree on all points. It's about the best I've had. I just picked this one up out of curiosity.
Aside from the button difficulty, my only complaint about the Incipio (and this case too for that matter) is that the cutout for the USB is a little too small so come cables don't seat very easily.
OK didn't realize you had the ngp case already. It is a good case only wish it had a holster of some sort, I hate putting my phone in my pocket.
For now I'm using the seidio surface combo which gets the job done, but the case developed a crack by the power button.
Decided I will give the seidio active combo a try. I know people have mentioned it collecting lint and sometimes difficulty clipping in the holster, but I am a person who has to see for himself.
Sent from my HTC Sensation 4G using xda premium
http://www.amazon.com/gp/product/B005A2UR4W/ref=ox_sc_act_title_1?ie=UTF8&m=A39OPNPYJWZFY1
I LOVE this one! Seems perfect. Everything lines up, it's snug and buttons are easy. And I LOVE the design. Oh, AND it qualifies for the free shipping if you spend $25+
I saw all these cases and I'm considering one but I had a couple questions first. Do they all slide together to close or snap on? Also the grey and black body glove one I've heard stories were it scratches the phone up is that true?
Sent from my HTC Sensation 4G using xda premium
john21511 said:
I saw all these cases and I'm considering one but I had a couple questions first. Do they all slide together to close or snap on? Also the grey and black body glove one I've heard stories were it scratches the phone up is that true?
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
TPU Cases are like silicon covers, but more rigid. They stretch slightly to fit snuggly and are one piece.
Related
Rocking my OEM tmobilw body glove case on g2x,this case is legit feels great also dropped many times no problems
Pics when I get home
Btw got this case in OEM packaging in eBay
Sent from Vero Beach on my G2X
Debel said:
Rocking my OEM tmobilw body glove case on g2x,this case is legit feels great also dropped many times no problems
Pics when I get home
Btw got this case in OEM packaging in eBay
Sent from Vero Beach on my G2X
Click to expand...
Click to collapse
Yeah I have that case too... best case for the G2x in my opinion and your are right about the back it has a really nice feel to it.
Sent from my G2x
Have to disgree the speck case is nice and added protection, can't beat it
Sent from my LG-P999 using XDA Premium App
I'd have to disagree with the speck case. I bought one when I first got my phone. It protects from scratches. But the case iitself had scratches on it from day one. Small cracks in it by the power button and the charger. Thing falls apart so easily. Also it makes the phone feel huge in my hand. Almost tempted to use my g2x naked
Sent from my LG-P999 using XDA App
I second the Body Glove, it's an awesome case with great protection.
Sent from my T-Mobile G2x using XDA Premium App
I'm curious, you guys say you purchased them directly from t-mobile? Does anyone have a link?
Yesterday I found this case at wal-mart (of all places) and it actually looked good, so i picked it up and love it. It's a body glove, but for some reason i dont see it on their website and it doesnt look like any of the cases ive seen at the t-mo store...
I wonder if it's different than the ones you guys have
I definitely second the Body Glove case. I'm not sure why more people dont use it. I've used nothing but Body Glove cases for all my phones since the G1 and I've had the: G1, HTC HD2, HTC HD7, G2X
I've had nothing but good results with the Body Glove cases. They can be found on Ebay for as cheap as $12-$14 also.
I had great success with the body glove for the HTC Touch Pro 2. An awesome product.
PhantomRampage said:
I'm curious, you guys say you purchased them directly from t-mobile? Does anyone have a link?
Click to expand...
Click to collapse
Here you go.
C0dy said:
Here you go.
Click to expand...
Click to collapse
The one I found in wal-mart is like half tpu and half rubber. It's only one piece altogether, but a small portion around the top edge is rubber so that the power and volume buttons are easily pushable (they feel fantastic! you feel it as if it were a real button) and then the lower parts of the case are tpu (i think).
On that back side there are some diagonal stripes but they're not so visible because it's black on black, but they come off the case just a little so it gives it a nice grip. On the inside of the case where your slip your phone in it is also rubbery, so it grips on the phone very well.
Besides this purchase I was using a standard tpu case from tpu-cases.com and a tpu fusion case from ebay. Neither of these cases did it for me, i was disappointed because the same tpu cases i had for mytouch 4g were a much better fit.
Anyway, this case is perfect for me, I love it! I can take pictures of it if you guys want, since i cant seem to find it online anywhere.
PhantomRampage said:
The one I found in wal-mart is like half tpu and half rubber. It's only one piece altogether, but a small portion around the top edge is rubber so that the power and volume buttons are easily pushable (they feel fantastic! you feel it as if it were a real button) and then the lower parts of the case are tpu (i think).
On that back side there are some diagonal stripes but they're not so visible because it's black on black, but they come off the case just a little so it gives it a nice grip. On the inside of the case where your slip your phone in it is also rubbery, so it grips on the phone very well.
Besides this purchase I was using a standard tpu case from tpu-cases.com and a tpu fusion case from ebay. Neither of these cases did it for me, i was disappointed because the same tpu cases i had for mytouch 4g were a much better fit.
Anyway, this case is perfect for me, I love it! I can take pictures of it if you guys want, since i cant seem to find it online anywhere.
Click to expand...
Click to collapse
That is the case I have & I love it. Only 14.99.
Sent from my LG-P999 using XDA App
OhhCoreey said:
That is the case I have & I love it. Only 14.99.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Yup mine was 14.99 too :]
I'd highly recommend this case to anyone with a g2x
PhantomRampage said:
The one I found in wal-mart is like half tpu and half rubber. It's only one piece altogether, but a small portion around the top edge is rubber so that the power and volume buttons are easily pushable (they feel fantastic! you feel it as if it were a real button) and then the lower parts of the case are tpu (i think).
On that back side there are some diagonal stripes but they're not so visible because it's black on black, but they come off the case just a little so it gives it a nice grip. On the inside of the case where your slip your phone in it is also rubbery, so it grips on the phone very well.
Besides this purchase I was using a standard tpu case from tpu-cases.com and a tpu fusion case from ebay. Neither of these cases did it for me, i was disappointed because the same tpu cases i had for mytouch 4g were a much better fit.
Anyway, this case is perfect for me, I love it! I can take pictures of it if you guys want, since i cant seem to find it online anywhere.
Click to expand...
Click to collapse
Yeah could you take some pics please... kind of want to see what it looks like.
Thanks
Sent from my G2x
Here's the exact eBay link
http://item.mobileweb.ebay.com/viewitem?itemId=160604289141&index=7&nav=SEARCH&nid=30252423501
Sent from Vero Beach on my G2X
It pops off every time I've dropped it. But I like everything about it otherwise. The belt clip acts as portrait and landscape stand plus it acts as an anchor you can hug with your 2 middle fingers when holding it in landscape.
PhantomRampage said:
The one I found in wal-mart is like half tpu and half rubber. It's only one piece altogether, but a small portion around the top edge is rubber so that the power and volume buttons are easily pushable (they feel fantastic! you feel it as if it were a real button) and then the lower parts of the case are tpu (i think).
On that back side there are some diagonal stripes but they're not so visible because it's black on black, but they come off the case just a little so it gives it a nice grip. On the inside of the case where your slip your phone in it is also rubbery, so it grips on the phone very well.
Besides this purchase I was using a standard tpu case from tpu-cases.com and a tpu fusion case from ebay. Neither of these cases did it for me, i was disappointed because the same tpu cases i had for mytouch 4g were a much better fit.
Anyway, this case is perfect for me, I love it! I can take pictures of it if you guys want, since i cant seem to find it online anywhere.
Click to expand...
Click to collapse
This is the animal...and its reviewed. Looks close to the single piece T-mobile case
http://www.youtube.com/watch?v=HA7N6hGHJSM
Yup thats it!
Sorry about that guys, I completely forgot about this thread and forgot to post pictures >.> But yeah, thats the case I have. My box doesnt say "grasp" or anything, so i dunno about the exact name.
This is a GREAT case though. I'd highly recommend it to those of you that are used to TPU cases. Check if they have them at your local walmart and give it a try
I second the Walmart body glove, nice case
went to two of my local walmarts, neither of them carry ANY case all besides iphone cases.
syn3rgyz said:
went to two of my local walmarts, neither of them carry ANY case all besides iphone cases.
Click to expand...
Click to collapse
I believe they are taking them out of the walmarts the specific case, mine did....your walmarts should have other cases, I would expect you would have asked so maybe not.
I was able to do a site to store, I am not sure if that option is still working though http://www.walmart.com/ip/Body-Glove-TPU-Case-for-T-Mobile-G2X/16617184
I may like the standard T-Mobile sleeve more though, and those are going for 6-8 on ebay. I think the stock sleeve has a bit more protection for drops. If you don't mind a slightly large lip
If you’ve ever been a customer of Seidio before, then you know and expect the quality and craftsmanship that they put into their products. It is my pleasure to write that the Active case and holster combo for the HTC Sensation 4G meets nothing less than these expectations, and offers the level of comfort, protection, and functionality that is desired. As with their past products, Seidio has continued to masterfully craft the Active case to allow for full access to all functionality ports (charging, audio, camera, speakerphone, and buttons) on your device, and have done so without adding unnecessary weight or bulk to the overall feel. Additionally, the case is comprised of Seidio’s traditional soft touch material that is held in place by a heavy duty plastic shell, which maximizes the overall protection of the device and offers an unparalleled shock resistance. The holster is also made of Seidio’s heavy duty plastic, which holds the protected device very snug and safe with the assistance of the high quality clip up top. If you’re in the market for a case that will provide maximum drop protection for your HTC Sensation 4G and feel smoother and more streamlined than anything else currently available, then you can’t go wrong with the Active case and holster combo.
All of Seidio’s products are available at http://www.seidioonline.com/
<Video review coming soon>
Looks nice! I like the look of it. Kinda reminds me of a toughbook lol. But I love the look of the combo when put together. I may get a blue one to change it up a bit .
Great review! How does it fit on your belt? I currently have a universal pouch. It works but looks too bulky IMO. Also how hard/easy is it to take off? In case of the dreaded battery pulls for us rom flasher-compulsive types . LOL
kpjimmy said:
Looks nice! I like the look of it. Kinda reminds me of a toughbook lol. But I love the look of the combo when put together. I may get a blue one to change it up a bit .
Great review! How does it fit on your belt? I currently have a universal pouch. It works but looks too bulky IMO. Also how hard/easy is it to take off? In case of the dreaded battery pulls for us rom flasher-compulsive types . LOL
Click to expand...
Click to collapse
It's great when applied to your belt. Very sturdy. I used a universal pouch before too, but this thing blows that out of the water. As far as taking it off, you can do so without even taking the shell off first. Just grab one corner and slide it back. Very easy, but putting it back on does require the soft touch case first then the shell. Doesn't take more than a few seconds though once you get the hang of it and the fit right.
Excellent review (pictures). Personally I love seidio and have used them on all my phones. Looking forward to getting this one.
Sent from my HTC Sensation 4G using XDA App
Thanks for the review.
I was contemplating on getting this one while waiting for Otterbox to release the Defender series on the Sensation.
Will probably get it and then the Otterbox one when it comes out to compare.
Got the same one and I love it. Good thing I have a holster cause the rubber parts is a lint magnet but wipes off easily. I love this case!
tabuburn said:
Thanks for the review.
I was contemplating on getting this one while waiting for Otterbox to release the Defender series on the Sensation.
Will probably get it and then the Otterbox one when it comes out to compare.
Click to expand...
Click to collapse
Are they coming out with a defender, pare? I thought just a commuter case, I'm not sure though.
*want* *checks pockets, finds lint* *cry*
I just bought this and since theres no "plastic finger" holding the silicone down on the top by the power button you cant put it back in the holster with one hand. The silicone bunches up so you need to use one hand to hold the clip open and one to put the phone in the holster. I still think its a nice setup but wish there was an extra finger on the top.
Nice review...Seidio has always been a fav!
chadsin said:
I just bought this and since theres no "plastic finger" holding the silicone down on the top by the power button you cant put it back in the holster with one hand. The silicone bunches up so you need to use one hand to hold the clip open and one to put the phone in the holster. I still think its a nice setup but wish there was an extra finger on the top.
Click to expand...
Click to collapse
After using it for a day or two it gets easy to do it all with one hand. Pull the clip up with your little fingers and push the phone in with your index and middle.
Sent from my HTC Sensation 4G using XDA Premium App
Lakeshow423 said:
Are they coming out with a defender, pare? I thought just a commuter case, I'm not sure though.
Click to expand...
Click to collapse
I can't confirm that they will but the Sensation is new so I'd guess a couple more months and they will probably come out with one.
Sent from my HTC Sensation Z710e using XDA Premium App
Great review, Does it add a lot of thickness to the phone compared to a TPU case?
Ended up ordering this case from ebay because of your review. Also because my brother has had the Active X version on his iPhone 4. He has dropped it more times than he can remember. The case has chipped where it hit and the Zagg was scratched but the iPhone is in pristine condition.
I am extremely pleased with case, Feels great, Sturdy and I feel like it could actually survive a drop now. The only thing I don't like too much is the silicone jacket attracts lint and dust a bit but it doesn't stick to it and I can brush it off or blow it off quite easily. So if you're looking for a case that will protect your investment you won't go wrong here. Doesn't add much bulk to the sleek Sensation 4G.
Overall a great case, With superior protection.
I have this combo as well except in blue. It is very nice but I must agree with the post about wishing it had a hard plastic section on the top front of the case to make it easier to "pop" it into the holster. Can it still be done with one hand? Yes, but not as easily and this has already caused a couple of near drops due to it not clicking in just right.
Overall I'm very pleased but I've also ordered the Trident case to see if that one doesn't have this issue (hopefully it'll fit in my Seidio holster too).
I had one of these on my Droid X and i must say they hold up. took several skips across the concrete. no damage of any kind. think i need to order for my sensation too. cause i'm a auto tech and i always be around dangerous things. great review
madwolf27 said:
*want* *checks pockets, finds lint* *cry*
Click to expand...
Click to collapse
+1
I had one of these on my old Evo.The black soft cover is a huge lint/dirt magnet.I couldn't stand it,after about a week of use i threw it away.Frankly i loved everything else about this case,but the lint thing is a deal breaker for me.
i just ordered one off ebay, hopefully i like it. wanted it real bad actually, even though i pre-ordered an otter box case as well.
I bought my mom a SGS4G last week (her first smartphone,) and I've been searching EVERYWHERE for a TPU case for it. She just wants something simple, preferably clear or smoke colored, but every one I've found at a reasonable price has a pattern (diamonds, argyle, etc.) Even on eBay, the majority of the TPU cases have some sort of pattern, which is extremely frustrating. I don't understand why, because the SGS4G is a gorgeous device... you would think more cases would be designed that accentuate the design, but that's just not so.
Can anyone recommend a good TPU case that fits well and doesn't have a pattern in it? It doesn't need to be anything fancy, just as long as it fits properly and doesn't have a stupid pattern. A bundle with a screen protector would be nice, but not necessary.
Speaking of, can anyone recommend a good quality screen protector for the SGS4G?
Thanks in advance for any help, I've got a massive headache trying to sort through all the ugly cases.
Smoke TPU: http://www.amazon.com/Premium-Flexi...FU9C04UXZ9&s=wireless&qid=1319269336&sr=1-270
Black TPU: http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=250784405080&ssPageName=STRK:MEWNX:IT
I just ordered the smoke one last night. The image was different last night when I placed the order. I'm not sure why they keep changing the pictures like that. Weird.
You could also refer to this thread: http://forum.xda-developers.com/showthread.php?t=1040980
Thanks for the link, please post once yours arrives and let me know how it fits! I'll check out the other thread and see what I can find as well.
The guy who originally posted it said it fits great. I'm not too sure about buttons though. I'm really iffy about buttons for TPU cases, since they're usually very difficult to press. The smoke case looks really good though, because the buttons seem to be very distinct (two buttons for volume instead of the usual one).
I bought that same 'smoke' case from eBay. I guess its really iffy on if you get a good one. It isn't exactly a smoked case but more of a hybrid case. Its outer rim is black tpu and the back is a frosted polycarbonate material. There are 2 versions of this case though, the one wirh the covered buttons is the good version. everyone said it had a perfect fit and they absolutely loved it on the vibrant forums and then there's the one where there are cutouts for the buttons. That version, which I unluckily got, SUCKS. The fit was loose, the bezel wasn't fully covered and well eventually it broke . I hope you have a better experience than I did.
-edit-
I just remembered you were the one with the trident aegis. Lol why are looking for another case?
Sent from my SGH-T959V using XDA App
icy56 said:
I bought that same 'smoke' case from eBay. I guess its really iffy on if you get a good one. It isn't exactly a smoked case but more of a hybrid case. Its outer rim is black tpu and the back is a frosted polycarbonate material. There are 2 versions of this case though, the one wirh the covered buttons is the good version. everyone said it had a perfect fit and they absolutely loved it on the vibrant forums and then there's the one where there are cutouts for the buttons. That version, which I unluckily got, SUCKS. The fit was loose, the bezel wasn't fully covered and well eventually it broke . I hope you have a better experience than I did.
-edit-
I just remembered you were the one with the trident aegis. Lol why are looking for another case?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
I love my Trident Aegis, but its look is getting bad. The matte finish on the plastic is coming off, which makes it look cheap. Kinda disappointing. I really liked the case too. I also snapped the bottom a bit when I was taking it off (although it still all stays well together).
That's very interesting how there would be such a huge difference between the cases. I hope I got a good one then. The one from DayDeal (the one I posted in this thread) looks pretty good. The buttons are protected, but it looks like it would be easier to press than the standard TPU cases.
EDIT:
I just want to note that the IMAGES are different for DayDeal and the other retailers. DayDeal actually has the image as http://ecx.images-amazon.com/images/I/3106XVVkf1L._SL500_AA300_.jpg and http://ecx.images-amazon.com/images/I/41k4wppV-9L._AA300_.jpg, while all the other retailers have an image like this: http://ecx.images-amazon.com/images/I/51PiNV1S4zL._SL500_AA300_.jpg.
That might be something important to keep in mind.
EDIT #2:
I think what you're talking about are these cases:
1) http://www.daydeal.com/product.php?productid=45703
2) http://www.daydeal.com/product.php?productid=50098
I'm betting the former is better than the latter.
icy56 said:
I bought that same 'smoke' case from eBay. I guess its really iffy on if you get a good one. It isn't exactly a smoked case but more of a hybrid case. Its outer rim is black tpu and the back is a frosted polycarbonate material. There are 2 versions of this case though, the one wirh the covered buttons is the good version. everyone said it had a perfect fit and they absolutely loved it on the vibrant forums and then there's the one where there are cutouts for the buttons. That version, which I unluckily got, SUCKS. The fit was loose, the bezel wasn't fully covered and well eventually it broke . I hope you have a better experience than I did.
-edit-
I just remembered you were the one with the trident aegis. Lol why are looking for another case?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
The case that I got was the one with a black rim and transparent back cover. It feels really durable because of the polycarbonate back, but it makes taking it off a hassle.
With that said, I still love this case. It covers everything perfectly and it keeps the phone slim. The buttons are extremely easy to press as well.
bkoon1218 said:
The case that I got was the one with a black rim and transparent back cover. It feels really durable because of the polycarbonate back, but it makes taking it off a hassle.
With that said, I still love this case. It covers everything perfectly and it keeps the phone slim. The buttons are extremely easy to press as well.
Click to expand...
Click to collapse
Glad you like your case. So I assume yours had a covered sleep button and volume rocker? I have the same thing, just with a crappy fit and cut out buttons.
Sent from my SGH-T959V using XDA App
icy56 said:
Glad you like your case. So I assume yours had a covered sleep button and volume rocker? I have the same thing, just with a crappy fit and cut out buttons.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Yeah, mine were covered. I like that the buttons are separated too. I gotta press a bit harder than on my Trident Aegis case, but I guess this will do for now.
So I received my Trident Aegis Case today and I love it. On the one hand it is bulkier than both the Cimo and Diztronic cases. It doesn't feel as grippy as the Cimo which is what I have been using.
On the other hand the phone feels like it could take a bigger hit. Also, the buttons are a lot easier to press than with a case or even without a case. The power button was a bit of a frustration for me but not so with this case. The cover also has covers for the ports.
To answer another question in another thread, you can attach a lanyard to this case, two little holes on the same side as the volume bar.
I will update when I use it some more to get my impressions for every day use. I took pictures.
It also comes with a screen protector, but I have not used it since I already had a different one on the phone.
Here's a link http://www.tridenteer.com/categories/HTC-ONE-S{47}HTC-VILLE/ It comes in black, blue, green, pink and red.
Just to chime in, I've been using this case for about a week and I can echo that the buttons are MUCH easier to press in this case. It was frustrated with the power button, especially with the D3O case from T-Mobile. This new case is like night and day.
Trident does a really good job of balancing silicone and hard shells so that the phone still has plenty of cushioning in case you drop it while not being too 'sticky' from the silicone. This is a welcome from the typical gel/silicone cases that get caught in your pockets.
I'm really quite gentle on my phones but having this same type of case on my last phone gave me plenty of confidence is not having to baby it. Tossing it around and dropping it doesn't make me even wince anymore. The One S case is no exception.
Love this case! I have the blue one also. Best color imo.
I managed to get a black Trident Aegis off ebay for my phone and so far i'm loving it. Works really well and it's alot easier for me to handle now. As a lefty, I always had issues with the power button but now since it's more prominent, I can reach it pretty quickly.
CephiroX said:
I managed to get a black Trident Aegis off ebay for my phone and so far i'm loving it. Works really well and it's alot easier for me to handle now. As a lefty, I always had issues with the power button but now since it's more prominent, I can reach it pretty quickly.
Click to expand...
Click to collapse
I received my green aegis awhile back. Love the color and feel of the case. Not bulky and as mentioned earlier, easy to push power and volume buttons easily. (Lefty also)
Only issue I have, and it may not be one, the corners, though covered with the silicone, seem like if I were to drop the phone on a corner, how much impact resistance will it absorb... Again, it may be enough for a normal 3-5 foot drop.. though not willing to test it out intentionally. :cyclops:
does anybody knows if there is a possibility to purchase one of the trident Aegis for my One S in Europe, especialy Germany?
would be very nice.
greetings,
H.
I want this , I have the black 1S so I would get the red one XD
Sent from my HTC VLE_U using xda premium
does this case lift the screen protector?
Kawaisa said:
does this case lift the screen protector?
Click to expand...
Click to collapse
Depends, it lifted mine a little bit on the bottom of the phone near the capacitive buttons so I just trimmed the next screen protector corners before placing it.
I think this has more to do with the curved glass screen than the screen protector.
I have not noticed this.
I got mine today !!
Sent from my HTC VLE_U using xda premium
carlos16119 said:
I got mine today !!
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
How does it look? Can you post some pictures, I am thinking of getting the One S with that case.
im 14 and i dont know if i should get this case or the kraken version i like the kraken because becuase it has a big lift so the screen get scratched which do you think is better
Thanks for the pics, helped me decide to get this case
I want to get this case but at the same time I am very iffy do to the fact that it is sooo bulky, any advice for someone coming from a Diztronic?
personally I prefer no case at all.. besides, from my experience, ONE S is not a easily scratched phone...
putting a case of any sort destroys the original design, this is especially true with iPhone, one of the most beautiful design out there, but 95% covered in a case which then is no prettier then my uncovered ONE S.
just my taste tho
I currently have mine removed, the bulk wasn't really the issue but the silicone made it difficult to slide in and out of my pocket.
I got my case a couple days ago and I love it. its not too bulky imo, it give it more grip for me and I don't feel like im always going to drop it if I grab the phone wrong. I think the case looks great as well (I got the blue one).
Thought I read somewhere that the Trident Aegis case for the One S covers the notification light. Is that true?
CzarDestructo said:
It was frustrated with the power button, especially with the D3O case from T-Mobile.
Click to expand...
Click to collapse
You guys can just do what I do and put a dab of loctite gel inside the case where the button sections are. PROBLEM SOLVED!
I had the D30 and a little glue inside and the buttons became easier to press than without a case at all.
Cheers.
Hi I've been a lurker for a while pyt this is my first post and I was wondering if anyone had good recommendations for cases with a frontlip for the one x. I switch from the iPhone 3gs and was using the incase slider that a had a really nice design and saved my phone many times. I was the wondering if anyone knows of a similar case that won't scratch my phone like the incase did.
Sent from my HTC One X using xda app-developers app
Loving my Case-mate "Smooth" purchased from expansys. Semi-rigid with a great hand feel. Recommended. No cutout for the contacts on the back though.
Sent from my HTC One X using XDA Premium HD. In between FCs.
I did see that case I how big is the lip on the front. And does it feel cheap at all or does it collect a lot of lint because those are my only problems with some gel and tpu cases.
Sent from my HTC One X using xda app-developers app
Feels very well made, fits tightly. You might have a tiny struggle getting it on at first, but you'll manage. The lip over the sides comes just far up enough to cover the seams on the glass. And because of its rigidity, it doesn't buckle to reveal the seams. I'm very satisfied with it.
One flaw I found - and it's been on both units I purchased - was a little unfinished cutting on the bottom edge of the camera lens cutout. Probably something in manufacturing where they cut it from the mold or whatever. It bothered me enough to get a return authorization, but it dawned on me (again) that life's too short to give a crap about ridiculous things like this so I never returned it. In fact, I bought the second unit for a buddy of mine instead.
-V
irvgotti said:
Hi I've been a lurker for a while pyt this is my first post and I was wondering if anyone had good recommendations for cases with a frontlip for the one x. I switch from the iPhone 3gs and was using the incase slider that a had a really nice design and saved my phone many times. I was the wondering if anyone knows of a similar case that won't scratch my phone like the incase did.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I bought the Incipio Feather and NGP. The feather is going back the NGP is staying. This is a somewhat overpriced but well made and well fitting TPU case (semi-soft). Feels much more secure in my hand and less likely to slip than the Feather, though admittedly not as sleek. the Speck cases on the iPhone seem to offer good protection, but the only ones I saw in the AT&T store were ugly red and bright blue, I am not a teenager, no way I am putting one of these on my phone.
The official purple TPU case is pretty good for that but I'm not sure if I'm a huge fan of its appearance.
Cimo TPU case from Amazon is pretty good. Nice lip and good grip on the edges. Plus it was only $8 when I bought mine
Sent from my HTC One X using xda app-developers app