Related
'cannot execute cloknot.exe' and 'cannot execute tskschedule.exe' and 'cannot execute repllog.exe' and 'cannot execute calnot.exe'...
these are intermittent, as in they dont happen every time i boot. any ideas?
you didnt read enogh isnt it? upgrade your radio!
The title says all you need and if you need to search see my signature it say XDA search culture!!! it shows you how to found all you need here!
Mr TNT recomends to update your radio to 2.19!!!! he has the radio search for him! please
ok i found a radio upgrade for the UK... will this adversely affect me in the USA?
Hey, just thought it would be a good idea to keep an updated list of the PRLs for sprint for our htc hero if you choose to opt out of OTA or otherwise just need to revert to an older PRL or something.
Here is some general PRL info:
PRL Definition - (Preferred Roaming List)
The PRL is a list of information that resides in the memory of some kinds of digital phones. It lists the radio frequencies the phone can use in various geographic areas.
The part of the list for each area is ordered by the bands the phone should try to use first. Therefore it's a kind of priority list for which towers the phone should use.
The PRL helps determine which home-network towers to use, and also which towers belonging to other networks to use in roaming situations (areas where the home network has no coverage.) When roaming, the PRL may instruct the phone to use the network with the best roaming rate for the carrier, rather than the one with the strongest signal at the moment.
Since a PRL tells the phone "where" to search for a signal, as carrier networks change over time, an updated PRL may be required for a phone to "see" all of the coverage that it should, both with the home network and for roaming.
navalynt said:
PRL Backup
(the following instructions are adapted from THIS link)
1. Download and install the latest version of QPST from HERE
2. Dial ##3424# on your Hero to put it into diagnosic mode and connect to your computer via USB
3. Open QPST Configuration and go to the PORTS tab
4. Click on "Add New Port".
5. Select the port listed as USB/QC Diagnostics (may vary, just don't use the data modem one)
6. Go to Start Clients Dropdown and select Service Programming
7. From Service Programming your phone should be selected - Click OK
8. Click "Read from Phone" and Enter MSL. Various fields should populate, don't worry about what tab you are one
9. Click "Save to File" and save to wherever you want (just remember where)
The prl will be located in the directory you saved the file in and labeled as <yourphoneesn>_sp.rl0
PRL Restore
Copy the PRL file to the root of your microSD card
Dial ##775# on the handset and enter the MSL code when prompted for password
Tap on Update PRL
If it read your microSD card correctly your PRL file should be listed in the bottom half of the screen to select
Select your PRL and click OK
Press the MENU button and tap on Commit Modifications (which will reboot the phone)
Click to expand...
Click to collapse
Old Corolada PRL Index for other Carriers
Do you have a PRL that you see missing? If you would like to contribute to the PRL INDEX just post here and I will add to this Main Post.
sources:
http://forum.ppcgeeks.com/showthread.php?t=95986
http://cid-eabe29f3770d8d15.skydrive.live.com/browse.aspx/.Public/PRLs
updated to new prl as of 12/03/10
I download all my prl files here > List
Which I got off of ppcgeeks in This thread
And I really like this idea, it'll save people a ton of time asking and searching thru threads all about the same thing.
kyouko said:
I download all my prl files here > List
Which I got off of ppcgeeks in This thread
And I really like this idea, it'll save people a ton of time asking and searching thru threads all about the same thing.
Click to expand...
Click to collapse
NICE!!
Thanks for the links, I updated the first post to reflect it.
There is a maximum of 8 files that i can attach to the post so i compiled all old PRLs into one zip file and the most recent PRL in another zip file for convenience.
Cheers!
PRL 03306, don't know what carrier it is. Phone's on revol but network shows up as sprint. should i update?
Ok, this is very odd. I just did the manual update to 60667, and when I rebooted my phone, it's roaming, but when I looked at what the PRL was, it said 00772
PRI Verison is flipz_01
Kernal 2..29-GoDmOde-OC-BFS
Running Pure Hero 2.1
Any ideas?
Can someone upload the latest prl.. I think it is 60669.
jumpman6235 said:
Can someone upload the latest prl.. I think it is 60669.
Click to expand...
Click to collapse
The latest is 60670
Sent from my HERO200 using XDA App
jumpman6235 said:
Can someone upload the latest prl.. I think it is 60669.
Click to expand...
Click to collapse
Dude...did you even read the posts lol? Click the "sources" on the OP, or click the "list" link in my post.
It has every prl you will ever need, and it's updated very quickly. Which is why nobody has to, or should for that matter, upload the prls.
PRI?
Is it possible for someone to extract the latest PRI as well and upload it? I'm in the Sacramento, CA (Northern California) area, and have tried many times to obtain the latest PRI through the Hands-Free activation. I'm currently running 1.70_003. Thanks.
kyouko said:
Dude...did you even read the posts lol? Click the "sources" on the OP, or click the "list" link in my post.
It has every prl you will ever need, and it's updated very quickly. Which is why nobody has to, or should for that matter, upload the prls.
Click to expand...
Click to collapse
Oops.. thanks
thanks for the prl list....
This is a great thread need to combine this with tecknowfiles info for hacking prls. Then ya got the best of both worlds.
I currently have the newest prl. But just out of shear curiousity i think think tonight im gonna try some of the older prls to see if theres any speed/network difference. Im always leary of using newer prls cause in the back of my mind i get a feeling that sprint is cutting back network speed. LOL! Call it a conspiracy theory!
I notice the instructions state to enter the MSL number. What is that and how do you get it?
I have been searching and searching but the best answer I get is to call sprint and ask for it? Is that correct? Or should a noob like me just switch back to a 2.1 rom and update prl like that?
mdsj said:
I notice the instructions state to enter the MSL number. What is that and how do you get it?
I have been searching and searching but the best answer I get is to call sprint and ask for it? Is that correct? Or should a noob like me just switch back to a 2.1 rom and update prl like that?
Click to expand...
Click to collapse
Go to the market and get the msl reader
Its essentially your password for the dialer menu.
Once you have your msl, go to your dialer put in# #775# give it a few seconds and it will ask for your password (this is where you enter your msl number )
Then follow the prompts to change your prl .
Once done press menu then confirm.
mdsj said:
I notice the instructions state to enter the MSL number. What is that and how do you get it?
I have been searching and searching but the best answer I get is to call sprint and ask for it? Is that correct? Or should a noob like me just switch back to a 2.1 rom and update prl like that?
Click to expand...
Click to collapse
regardless you still have to go back to a 2.1 rom.. fresh,zen, or even the stock ruu... in order to be able to manually update your prl...
Big-O-Devil said:
regardless you still have to go back to a 2.1 rom.. fresh,zen, or even the stock ruu... in order to be able to manually update your prl...
Click to expand...
Click to collapse
no, you don't have to. if you have a kernel with diag enabled you can install DMPortRead.apk and DmService.apk and use cdma workshop.
here is prl 60670
cheers____
so if i am currently using a CM6 nightly ROM. i can't update my prl???? becuz im currently on version 60665 and i would love to see it on 60670
nspot said:
is it possible for someone to extract the latest pri as well and upload it? I'm in the sacramento, ca (northern california) area, and have tried many times to obtain the latest pri through the hands-free activation. I'm currently running 1.70_003. Thanks.
Click to expand...
Click to collapse
why hasnt anybody responded to this man.....im hearin you bro. Us sac-folks gotta kno da biz!
I'm using a guide I found through Google (http://forum.xda-developers.com/showthread.php?t=881883).
I get to "now go to the memory tab in CDMA workshop and under NV ITEMS click write" step, but the demo version of CDMA-Workshop won't allow me to write. Can anyone link me to either a cracked version of CDMA-Workshop or an alternative program? Frustrations are seriously mounting on this...
I am on 3 Austria and I just got a new Samsung update which I suppose is the tethering update.
I already had tethering enabled with the registry hack, and I suppose that's the reason why the update fails. I deleted the registry entries but I still get the error.
I also tried the CAB Sender tool and I get the following message:
Complete with error code: 8018001E, error message: IU (Image Update) installation failed on phone: Filename conflict. Two or more packages in the update contain the same file.
Any ideas? I can upload the update file if this is any help.
singularity0821 said:
I am on 3 Austria and I just got a new Samsung update which I suppose is the tethering update.
I already had tethering enabled with the registry hack, and I suppose that's the reason why the update fails. I deleted the registry entries but I still get the error.
I also tried the CAB Sender tool and I get the following message:
Complete with error code: 8018001E, error message: IU (Image Update) installation failed on phone: Filename conflict. Two or more packages in the update contain the same file.
Any ideas? I can upload the update file if this is any help.
Click to expand...
Click to collapse
I have the same problem... I also use an app to enable the internet sharing...
Long story short, I bricked my lg g2 d801 after flashing twrp recovery and trying to flash custom rom. The phone would restart randomly. I had no connection and the signal bars crosses out in red. In settings most of my info like baseband, imei etc were missing. I was looking up and many people bricked their phones with no EFS backup to restore the IMEI. This is how I fixed my phone. This should also help people who have zeroed out IMEI after bad flash or whatever reason. But you should at least have IMEI number ready (from your box/ receipt or call t-mobile)
1. Flashed the phone to factory firmware using LG support tool. I used the following guide:
http://androidcure.com/unbrick-lg-g2-stock-firmware/
used the firmware: T-Mobile KitKat D80120A_00.kdz
there's also similar guides in xda, follow whichever you prefer. Goal is to revert the phone back to stock.
After flashing the phone, the phone was woking; however imei was null. In phone settings my IMEI was 0. To fix the null/bad imei follow this guide (Not all the steps are my work; this guide helped me http://forum.xda-developers.com/showthread.php?t=1942417 , also watched some you tube videos):
2. You need the following drivers and software:
LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.10.1
QPST_2.7_378
imei converter: http://www.sendspace.com/file/a3spfh
3. After installing the driver; turn on USB debugging and connect the phone to computer
4. Install QPST, run QPST configuration from from start menu
5. Click on Ports tab. Click Add new port. Your phone should be COM4/5. It will say USB after the port. Select the port and click OK.
6. The port should come up on active phones. Select the phone and and click on "Software Download" from start clients menu
7. Click on Backup tab. Your port should appear. Backup by clicking on start
8. Now go to Program Files/qualcomm/qpst/bin folder
9. Run RF_NV_Manager program
10. Click File read from phone. Your IMEI should appear on number 550; NV_UE_IMEI_I
11. In my case; there was no item 550 as my IMEI was missing. Don't worry.
12. Click on file> Read supported RF NV items
13. Now click on item 550. It should show 9 blank fields.
14. Start IMEI converter. Type in your IMEI in enter IMEI click on convert IMEI
15. There will be 18 digits in groups of 9
18. In RF_NV_Manager program; click on Hex by Write NV button
19. IN the 9 boxes; type in the numbers from IMEI converter starting from left. Type in first group of two numbers in the first field, then go to the next field and type in second 2 digits
20. After you fill in; click on write NV
21. Now click on File> Read from phone. NV item number 550 should appear now.
22. Unplug, Restart your phone and your IMEI number should be there and phone should connect to network.
Above process fixed my phone with full 4G LTE data. Now depending on the how bad your EFS was damaged; you might not get 4G lte data. But at least now; you will be able to send the phone back to LG for repair or return to t-mobile as IMEI number will be in your phone.
You can do this with EFS Professional. It does all the conversion for you and you dont need QPST. Just simply type in IMEI and write to device.
Sent from my LG-D802 using Tapatalk
I've tried the this guide and it didn't work for me. I get an error when I try to write NV. The good news is that I don't have an immediate need to change/fix IMEI but I was wondering if it ever gets zeroed out I have a way to restore it. I will give your tool a try.
lyriquidperfection said:
You can do this with EFS Professional. It does all the conversion for you and you dont need QPST. Just simply type in IMEI and write to device.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
So the EFS Professional is compatible with phones other than Samsung? Once I've unzipped the file I see a bunch of binaries for Samsung phones, but nothing for LG G2. When I try to run it generates an error the app is for Samsung devices only... Where can I get a compatible binary for LG G2 or EFS professional that works with LG G2?
I've tried Qualcomm NV Tools instead of EFS Professional and I cannot create a backup. When backup is being created it errors out saying the device has been disconnected... Also if I write the IMEI it says it was accepted but it doesn't change.
PS: I should probably start screweing around with these apps since I may introduce the problem. My IMEI is fine.
tpaxadpom said:
So the EFS Professional is compatible with phones other than Samsung? Once I've unzipped the file I see a bunch of binaries for Samsung phones, but nothing for LG G2. When I try to run it generates an error the app is for Samsung devices only... Where can I get a compatible binary for LG G2 or EFS professional that works with LG G2?
I've tried Qualcomm NV Tools instead of EFS Professional and I cannot create a backup. When backup is being created it errors out saying the device has been disconnected... Also if I write the IMEI it says it was accepted but it doesn't change.
PS: I should probably start screweing around with these apps since I may introduce the problem. My IMEI is fine.
Click to expand...
Click to collapse
Imei will only write if zeroed out. You are correct, EFS Professional is for samsung devices but the Qualcomm NV Tools is universal. I am currently in the middle of updating it so more features can be used on other devices.
Sent from my LG-D802 using Tapatalk
lyriquidperfection said:
Imei will only write if zeroed out. You are correct, EFS Professional is for samsung devices but the Qualcomm NV Tools is universal. I am currently in the middle of updating it so more features can be used on other devices.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
got it. Thank you.
Ey guys , im new in this foro. Sorry but my english.....i have a LG D802 , the imei said unkown ....I tried the method in this post but always obtain error when i use RF_NV_Manager , when i trie to read files from phone give me an error...the phone bricked when install a new custom rom.
Help please.....
the driver is correctly and the program detect the phone in port 26...
the error is this....
kamaleonico said:
the error is this....
Click to expand...
Click to collapse
did you try restoring the the phone with flash tool first?..
thank you so much, just did it and it worked perfectly fine !
kingroach said:
Long story short, I bricked my lg g2 d801 after flashing twrp recovery and trying to flash custom rom. The phone would restart randomly. I had no connection and the signal bars crosses out in red. In settings most of my info like baseband, imei etc were missing. I was looking up and many people bricked their phones with no EFS backup to restore the IMEI. This is how I fixed my phone. This should also help people who have zeroed out IMEI after bad flash or whatever reason. But you should at least have IMEI number ready (from your box/ receipt or call t-mobile)
1. Flashed the phone to factory firmware using LG support tool. I used the following guide:
http://androidcure.com/unbrick-lg-g2-stock-firmware/
used the firmware: T-Mobile KitKat D80120A_00.kdz
there's also similar guides in xda, follow whichever you prefer. Goal is to revert the phone back to stock.
After flashing the phone, the phone was woking; however imei was null. In phone settings my IMEI was 0. To fix the null/bad imei follow this guide (Not all the steps are my work; this guide helped me http://forum.xda-developers.com/showthread.php?t=1942417 , also watched some you tube videos):
2. You need the following drivers and software:
LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.10.1
QPST_2.7_378
imei converter: http://www.sendspace.com/file/a3spfh
3. After installing the driver; turn on USB debugging and connect the phone to computer
4. Install QPST, run QPST configuration from from start menu
5. Click on Ports tab. Click Add new port. Your phone should be COM4/5. It will say USB after the port. Select the port and click OK.
6. The port should come up on active phones. Select the phone and and click on "Software Download" from start clients menu
7. Click on Backup tab. Your port should appear. Backup by clicking on start
8. Now go to Program Files/qualcomm/qpst/bin folder
9. Run RF_NV_Manager program
10. Click File read from phone. Your IMEI should appear on number 550; NV_UE_IMEI_I
11. In my case; there was no item 550 as my IMEI was missing. Don't worry.
12. Click on file> Read supported RF NV items
13. Now click on item 550. It should show 9 blank fields.
14. Start IMEI converter. Type in your IMEI in enter IMEI click on convert IMEI
15. There will be 18 digits in groups of 9
18. In RF_NV_Manager program; click on Hex by Write NV button
19. IN the 9 boxes; type in the numbers from IMEI converter starting from left. Type in first group of two numbers in the first field, then go to the next field and type in second 2 digits
20. After you fill in; click on write NV
21. Now click on File> Read from phone. NV item number 550 should appear now.
22. Unplug, Restart your phone and your IMEI number should be there and phone should connect to network.
Above process fixed my phone with full 4G LTE data. Now depending on the how bad your EFS was damaged; you might not get 4G lte data. But at least now; you will be able to send the phone back to LG for repair or return to t-mobile as IMEI number will be in your phone.
Click to expand...
Click to collapse
Hey kingroach, amazing guide, wonderful!
I followed everything step by step. Right now I have some generic IMEI which does not work, I'm trying to write my original one back, but at step 20, when I click "Write NV", the numbers change, the Hex unchecks and the popup comes out. When I close it, Hex goes back to being checked and numbers return to what I made them. and I get this popup:
Here's a video.
lyriquidperfection said:
You can do this with EFS Professional. It does all the conversion for you and you dont need QPST. Just simply type in IMEI and write to device.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Hi, thank you for your help too in these threads. I tried EFS Pro, everything checks out, it says IMEI written, but when phone is restarted, nothing has changed. Do you know if EFS Pro need some other setting enabled to actually change the IMEI?
Try deleting 550 nv item which contains the imei and save. Restart the phone and add it.
kingroach said:
Try deleting 550 nv item which contains the imei and save. Restart the phone and add it.
Click to expand...
Click to collapse
nope, it dont work
im genuinly surprised the procedure works for lg g2 and not for nexus 5
how did you delete item 550?
asterix005 said:
how did you delete item 550?
Click to expand...
Click to collapse
I couldn't - you try with the custom list, under tools I think. You move item 550 from the right column, and it dissappears, but when I read NV phone items, its there. It's untouchable I tell you!:silly:
kingroach said:
Long story short, I bricked my lg g2 d801 after flashing twrp recovery and trying to flash custom rom. The phone would restart randomly. I had no connection and the signal bars crosses out in red. In settings most of my info like baseband, imei etc were missing. I was looking up and many people bricked their phones with no EFS backup to restore the IMEI. This is how I fixed my phone. This should also help people who have zeroed out IMEI after bad flash or whatever reason. But you should at least have IMEI number ready (from your box/ receipt or call t-mobile)
1. Flashed the phone to factory firmware using LG support tool. I used the following guide:
http://androidcure.com/unbrick-lg-g2-stock-firmware/
used the firmware: T-Mobile KitKat D80120A_00.kdz
there's also similar guides in xda, follow whichever you prefer. Goal is to revert the phone back to stock.
After flashing the phone, the phone was woking; however imei was null. In phone settings my IMEI was 0. To fix the null/bad imei follow this guide (Not all the steps are my work; this guide helped me http://forum.xda-developers.com/showthread.php?t=1942417 , also watched some you tube videos):
2. You need the following drivers and software:
LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.10.1
QPST_2.7_378
imei converter: http://www.sendspace.com/file/a3spfh
3. After installing the driver; turn on USB debugging and connect the phone to computer
4. Install QPST, run QPST configuration from from start menu
5. Click on Ports tab. Click Add new port. Your phone should be COM4/5. It will say USB after the port. Select the port and click OK.
6. The port should come up on active phones. Select the phone and and click on "Software Download" from start clients menu
7. Click on Backup tab. Your port should appear. Backup by clicking on start
8. Now go to Program Files/qualcomm/qpst/bin folder
9. Run RF_NV_Manager program
10. Click File read from phone. Your IMEI should appear on number 550; NV_UE_IMEI_I
11. In my case; there was no item 550 as my IMEI was missing. Don't worry.
12. Click on file> Read supported RF NV items
13. Now click on item 550. It should show 9 blank fields.
14. Start IMEI converter. Type in your IMEI in enter IMEI click on convert IMEI
15. There will be 18 digits in groups of 9
18. In RF_NV_Manager program; click on Hex by Write NV button
19. IN the 9 boxes; type in the numbers from IMEI converter starting from left. Type in first group of two numbers in the first field, then go to the next field and type in second 2 digits
20. After you fill in; click on write NV
21. Now click on File> Read from phone. NV item number 550 should appear now.
22. Unplug, Restart your phone and your IMEI number should be there and phone should connect to network.
Above process fixed my phone with full 4G LTE data. Now depending on the how bad your EFS was damaged; you might not get 4G lte data. But at least now; you will be able to send the phone back to LG for repair or return to t-mobile as IMEI number will be in your phone.
Click to expand...
Click to collapse
i tried. but at step 5, my my PC said "No Phone". can you help me ????
I keep getting
Exception Thrown!!
NvManager::getNvItemsFromPhone( const string comport )-
QpstServer::sendSyncImpl - Bad response from phone (DM packet
commands 19-24)
Any ideas? Please tag me in this.
Did you first reflash the stock rom? Someone was getting similar error and flashing stock rom fixed it.
Use EFS Professional to write your Original IMEI ....