Database Info

How to Flash MOTOROLA DROID to Cricket: 2.2 Froyo FULL apps,web,mms

Flash Moto Droid to Cricket / Metro full apps, web,mms.
This is my attempt to recreate the solution from Howard Forums
i may have missed a few steps along the way but here it goes. as of 08/02/2010 - make directory now for 2.2 roms
FILES FOR FLASHING TO CRICKET (U2nl,PRL's,Autostart,SPRecovery,NV items)
Special thanks and credit should go to
SyZtyM (i recreated his thred for XDA)
gijoey1980
Tracphonejunkie
whiterabittorg
To0
Insaincain (For the nv items. You are a legend, and credit is due where credit is due**AS read from SyZtyM)
Admin (For all sites. PERIOD)
You will need:
1. CDMA WS 2.7 (google)
2.Harware Virtural Serial Port this is the demo good for 14days
3. Motorola A855 USB drivers (These are the 32bit Drivers)
4. Cyanogen Mod Rom from Rom Manager in market
5. SPRecovery
6&7.Autostart.sh & U2nl from whitrabbit.org (thanks to whiterabbit). Save autostart.sh and U2nl in C:\android\tools\.
8.download Autostart (Root) from Market
9. NV items from http://www.whiterabbit.org/android (u must generate this uniquely with you [email protected] i have included a generated [email protected] for sample or to replace x's with you MDN
Step 1. First step is to make sure you have the drivers installed on your computer, and you also need to have Android SDK installed on your computer.
You will need to root the phone, key here is to make sure the kernel you load supports iptables.
Step 2. if you need to ROOT: follow the guide
than download Rom manager over wifi from MARKET, proceed to flash clockwork and download and install cyanogen 5.xx rom, and google apps..wipe data etc.
Step 2.1 if first fails. get RSD Lite 4.6 (google), Power on phone holding down the up arrow and pressing power, this will put you into bootloader mode.
Open RSD Lite 4.6
Flash the SPRecovery_ESE81.sbf file with RSD Lite.
this should just flash the recovery if not download a rom like SMOKEDGLASS unzip and put in folder on SD named Nandroid
Once the phone is completely rebooted into rooted android, power it off.
alternately u can install BuglessBeast froyo v 02.1 from alldroid.org then skip to these steps below
Hold down “T” on the keypad and power on phone.
Plug into computer and open HW Virtual Serial Port (your drivers should install and connect etc)
In HWVS set the IP address to 192.168.16.2 and the port to 11008, choose the com port 10 click connect. (For this tutorial we will use COM10)
Open CDMA WS 2.7 and (go to settings tab and deselect NV Enabled) then connect to COM10. if you dont deselect you will get PHONE FAILED ERRORS
On security tab send SPC 000000. (msg says phone accepts blah blah blah
Go to tab labeled “Other” and write prl. For Cricket EVDO, 6499(new service plan) and 38515 is recommended.
Go to NAM and enter MIN ex. 615-555-5593 (usually different from your actual phone# and MDN(your mobile number ex. 615-555-5551 and click write.
Goto “Memory” tab and click write under NV items, find the downloaded NV items you got from here
for example you must generate the NV items by inputing your MDN([email protected]). box opens telling you to save them as .txt and select them with cdma 2.7. (Thanks again to insanecain)
It should then say, 12 NV items were successfully written to phone.
Go to Main tab and click mode reset.
You can now close HWVS and CDMA WS and open cmd.exe on your computer.
if you have QPST open it on the com port 10 read your settings. under MIP mip2,,PPP(Um,AN...etc it should say [email protected] etc in the right columns....in the bottom box password may need to be written to phone, just type in cricket for both Um and An, cricket is the password.
Also select mobile ip+simple ip under MiP tab
select write to phone
Once phone reboots go to the market using WI-FI and download and install Autostart root required
Open the Voice Dialer on the phone and say “Open APNs” and click open.
Click on the Verizon and edit everything to match below:
Name - Cricket
APN internet
Proxy wap.mycricket.com:8080
Port 8080
Username [email protected]
Password cricket
Server wap.mycricket.com
MMSC http://mms.mycricket.com/servlets/mms
MMS Proxy wap.mycricket.com
MMS Port 8080
MCC 310
MNC 004
Authentication Type PAP or CHAP
APN type <Not set>
Now click the menu button and click Save.
Before starting the next step make sure you have the u2nl file in your this folder c:/android/tools and also that you have you autostart.sh file in this folder c:/
Now go to command prompt and type the following commands,
cd c:\android\tools
adb shell
mkdir /data/opt/
exit
adb remount
adb push c:\android\tools\u2nl /system/bin/u2nl
adb push c:\android\tools\autostart.sh /data/opt/autostart.sh
Now:
adb shell
chmod 0755 /system/bin/u2nl
chmod 0755 /data/opt/autostart.sh
adb reboot
Now, once your phone has rebooted, you should have working web, mms, app, gps, and all. If you don’t go back and check all the steps to insure you did everything exactly right.
thanks everyone for reading.
i would also like to thank everyone who helped give back to the droid community by solving this, (I gave up and switched back to my eris for full support like a Beeach! which i bricked twice) im back on DROID baby
currently running BuglessBeast Froyo v 02.1 and the p3 1000 kernel.
quadrant score: 972

this is a very good set up thanks for the post!

Open CDMA WS 2.7 and (go to settings tab and deselect NV Enabled) then connect to COM10. if you dont deselect you will get PHONE FAILED ERRORS
Click to expand...
Click to collapse
I get the phone failed error, but I don't see the NV Enabled option. Nor do I see the settings tab, where is that option?

broken linkkkkkkzzzzzzzzzzzzzzzzzzzz
"the guide" http://rootyourdroid.info/guides/obtaining-root/
Click to expand...
Click to collapse
is a broken link : (

ummm...flashed new rom...now no web,mms
ok, so im trying like hell to give this moto a shot. normally an htc fan. but the display, camera, and physical keyboard for the price was enticing. i did everything and got internet for a while. then i decided to load bugless' latest rom, now i have no web or mms. is there someting i have to redo??? knowing the norm with reflashes, i did the "open APNs" and redid everything there....but still no go. do i have to redo the Command prompts and the autostart download fr market?
*edit* did all the changes over...ALL. Still no web. if it helps any i did notice that i was unable to reprogam the phone using *228. it still works rite now (i guess based on the previous OTA), but it wont reprogram...i get "programming unsuccessful". I'M running PRLs 38003 & 6499 in Charlotte N.C. any help would be greatly appreciated.

i have a motorola droid on metropcs help me please awwwwwww!!!!
yes my phone was flashed on metropcs its a motorola droid 2.1 android (rooted) an i was deleting some files on my sd card today cuz it was too full an my phone rebooted all the way to the begining i had to look for a wifi connection to sign in my google ACCOUNT to use my phone again an i lost my internet connection an mms messaging but my phone still can text an make calls but my internet an mms i gone please help me to get it back on thanks

somebody hit me up with the info
i need help with my phone i ned to put my mms on an internet back on i lost it when the phone reebooted but its still can text an call on metropcs android motorola droid 2.1 rooted

fredline12002 said:
is a broken link : (
Click to expand...
Click to collapse
not sure whats up with the link, just google a new how to root, sorry

Geniusdog254 said:
I get the phone failed error, but I don't see the NV Enabled option. Nor do I see the settings tab, where is that option?
Click to expand...
Click to collapse
when u open HV serial Port, its the second to last or maybe last tab,,, you cant miss it. this is where u make sure NV Enabled is NOT selected

Wolfdragon said:
ok, so im trying like hell to give this moto a shot. normally an htc fan. but the display, camera, and physical keyboard for the price was enticing. i did everything and got internet for a while. then i decided to load bugless' latest rom, now i have no web or mms. is there someting i have to redo??? knowing the norm with reflashes, i did the "open APNs" and redid everything there....but still no go. do i have to redo the Command prompts and the autostart download fr market?
*edit* did all the changes over...ALL. Still no web. if it helps any i did notice that i was unable to reprogam the phone using *228. it still works rite now (i guess based on the previous OTA), but it wont reprogram...i get "programming unsuccessful". I'M running PRLs 38003 & 6499 in Charlotte N.C. any help would be greatly appreciated.
Click to expand...
Click to collapse
If your on 2.1 bugless you need to redo allthe steps for fully working rom, maybe for 2.2 also i havent had to for a while, only bcuz i have cricket and roam off metro.
luvjones305 said:
yes my phone was flashed on metropcs its a motorola droid 2.1 android (rooted) an i was deleting some files on my sd card today cuz it was too full an my phone rebooted all the way to the begining i had to look for a wifi connection to sign in my google ACCOUNT to use my phone again an i lost my internet connection an mms messaging but my phone still can text an make calls but my internet an mms i gone please help me to get it back on thanks
Click to expand...
Click to collapse
you need to be more specific with wat u deleted?? which rom u ran? etc where did u get it flashed? most likey u went to a metro dealer, to get it flashed, METRO sent out a update a 3 weeks ago (7/06/2010) that DISABLED ALL Dealer added ESN's from Hoodini. so u may just be out of luck. i will search to see if thats been fixed or worked around.
luvjones305 said:
i need help with my phone i ned to put my mms on an internet back on i lost it when the phone reebooted but its still can text an call on metropcs android motorola droid 2.1 rooted
Click to expand...
Click to collapse
what market are you in? who flashed your phone? quoted from above "METRO sent out a update a 3 weeks ago (7/06/2010) that DISABLED ALL Dealer added ESN's from Hoodini. so u may just be out of luck. i will search to see if thats been fixed or worked around. "

Metro Fix Web/mms
"[/QUOTE] "METRO sent out a update a 3 weeks ago (7/06/2010) that DISABLED ALL Dealer added ESN's from Hoodini. so u may just be out of luck. i will search to see if thats been fixed or worked around. "[/QUOTE]
For anyone having trouble with MMs/web on METRO please check out this thread. read from pg one if you dont know whats going on. or pick up here if you can perform the web/mms work around.
http://www.howardforums.com/showthread.php/1656326-Phones-and-more-info/page11

Grr
This is a great! Thank you for the instructions!
I am having one problum tho, and its very annyoing!!
When i first turn on my fone everything works internet+MMS+GPS+TXT+CALLS everything!
then when i recive or send a text or call (Anything that has to use 1X i think) I loose Internet+MMS and GPS
the only way it comes back is if i restart my fone!
dose anyone have any ideas? did i do somthing wrong? Please help.
I have a idea i know its possible on some phones to switch it so texts use 3G insted of 1x. Could i switch that on my droid?
Oh and im running bugless beast 2.2

good tutorial im just stuck at the step its written a little unclear im a moto newb unfortunately
""if you have QPST open it on the com port 10 read your settings. under MIP mip2,,PPP(Um,AN...etc it should say [email protected] etc in the right columns....in the bottom box password may need to be written to phone, just type in cricket for both Um and An, cricket is the password.
Also select mobile ip+simple ip under MiP tab
select write to phone""
i have downloaded cdma 2.7, nothing was stated about qpst in the necessary tools but i downloaded that too afterwards, and its not clear where i should go at this point after the initial reboot. are these directions for cdma2.7 or qpst? help???

................... bump

Hello sorry in advanced for the newbie question. My Moto Droid is already flashed to cricket. If I wanted to manually install 2.2 would I have to start with all steps or just from the 2.2 install?

iNFiNiTY125 said:
This is a great! Thank you for the instructions!
I am having one problum tho, and its very annyoing!!
When i first turn on my fone everything works internet+MMS+GPS+TXT+CALLS everything!
then when i recive or send a text or call (Anything that has to use 1X i think) I loose Internet+MMS and GPS
the only way it comes back is if i restart my fone!
dose anyone have any ideas? did i do somthing wrong? Please help.
I have a idea i know its possible on some phones to switch it so texts use 3G insted of 1x. Could i switch that on my droid?
Oh and im running bugless beast 2.2
Click to expand...
Click to collapse
from my understanding, cdma networks calls and text dont go through data connections, so when u place a call it will switch only to bars and no 1x/3g.
MMS and web will only work when not connected to a call ( i think thats what your stating??) ive never had a problem with data connection not coming back to phone after a call.... hopefully i answered your questions? and gps shouldnt be bothered at all that may be a rom issue. try a few roms other that bugless beast thats basically a stock ROM look into lithium mod or Chevyno1

tko1 said:
good tutorial im just stuck at the step its written a little unclear im a moto newb unfortunately
""if you have QPST open it on the com port 10 read your settings. under MIP mip2,,PPP(Um,AN...etc it should say [email protected] etc in the right columns....in the bottom box password may need to be written to phone, just type in cricket for both Um and An, cricket is the password.
Also select mobile ip+simple ip under MiP tab
select write to phone""
i have downloaded cdma 2.7, nothing was stated about qpst in the necessary tools but i downloaded that too afterwards, and its not clear where i should go at this point after the initial reboot. are these directions for cdma2.7 or qpst? help???
Click to expand...
Click to collapse
hello, lets see i believe this was originally the instructions to get the data working. so you needed QPST to enter in the passcode "cricket"....it just depends what rom you have. if you flash a rom and your data doesnt work then u will have to enter those settings in qpst. after entering those your data should work.

dortega2388 said:
Hello sorry in advanced for the newbie question. My Moto Droid is already flashed to cricket. If I wanted to manually install 2.2 would I have to start with all steps or just from the 2.2 install?
Click to expand...
Click to collapse
you should be fine with the NV items. after you flash 2.2 dial 611 (you may need to reflash PRL, and then from there i would give your phone about a 2minutes to see if any 1x/3g show up. if not commence with the instructions lol.

bigslanki said:
hello, lets see i believe this was originally the instructions to get the data working. so you needed QPST to enter in the passcode "cricket"....it just depends what rom you have. if you flash a rom and your data doesnt work then u will have to enter those settings in qpst. after entering those your data should work.
Click to expand...
Click to collapse
thanks for the reply, well i had all but given up on my droid dreams and i figured out on my own that they were QPST directions but were missing this important piece. QPST 2.7 WITH A OLDER BUILD LIKE 264 WILL NOT CONFIGURE THE DROID,IT GIVES AND ONLINE ERROR. YOU SHOULD USE AN UPDATED VERSION. I ENDED UP FINDING 2.7 BUILD 323.
Also. its unclear as to why in the adb commands we have
adb push c:\android\tools\autostart.sh /data/opt/autostart.sh
Now:
adb shell
it may be obvious to some but if Now: is an actual command it wouldnt work. so im assuming it isnt, and pretty much adb after that point is irreconcilable.
no matter what the droid never left the verizon network needless to say, and i havent recieved any input as to where i could have gone wrong, everything else was flawless up until the Now: part basically then i had to piece together adb. even tried without the now part and didnt succeed.

i did this and everything works. only problems is it 1x all the time; how to i get 3g?

HTC Evo 4G MetroPCS HOW TO!

If You Can't Figure It Out Message Me And I Will Do It For You
This is a guide on how to correctly Provision your EVO 4G for data and mms.
What you'll need
EVO 4G Thats Already Flashed To MetroPCS with Basic Talk and Text
Must be on $40 Dollar plan or better with unlimited Talk,Text,Web,MMS
EVO 4G Full Root and Nand Unlocked - Search XDA their are many forums for it.
QPST 2.7 Build 323 - Google It
CMDA Workshop 2.7 or any other version - Google it
Diag Mode Drivers - Download
Step 1 - Install Diag Drivers
1. Go to your phones dialer and dial ##3424#
2. Plug in your phone to the computer
3. Go To Device Manager and there should be a unknown device
4. Right Click on The unknown device and Click on Update Driver Software
5. Click on the 2nd Option
6. Browse to the folder where you downloaded the drivers
7. Let It Install
8. Once It Installs, depending If Your system is 32 Bit Windows xp through 7 or Windows Vista or 7 64 Bit the place where youll see the port will be different.
For 32 Bit, In Device Manager Check under communication Port and you'll see
the port for your device
For 64 bit, In Device Manager check under Modems and right click on the HTC Modem and go to properties. Go to the modem tab and you'll see your port there
9. Open up CDMA Workshop and select the port of your device and click connect and then read
10. Go to the security tab and in the SPC section hit read and thats your SPC code. Write It Down
11. Now Open Up QPST Configuration
12. Click On Add New Port
13. Uncheck the box that says Show Serial etc etc
14. This is what it should look like after you add port
15. Go To Start Clients and click on Service Programming
16. This will pop up just hit ok
17. This Is the next window that will come up
18. Click on Read from Phone and enter your SPC Code that you wrote down
19. Once it reads the contents from your phone, there will be a checkbox on the right side that says SPC Change Available. Check the box and change your the area that says Service Programing to 6 Zero's. Don't hit write just yet
20. Step Removed! On to the Next one
21. Go To the Display Tab and Change It To MetroPCS
22. Go To The M.I.P. Tab and copy the settings in my picture and be sure to set it to SIMPLE IP! Right now its set to MOB+Simple IP on stock HTC Phones
23. Now Click on the profile 0 and hit edit
Copy all the settings that are displayed in my picture. In NAI and Tethered NAI type (Your10DigitPhone#)@mymetropcs.com. In HA Shared Secret and AAA Shared Secret click on enter text string and type "metropcs" without the quotes in lowercase.
24. Now do the exact same thing for Profile 1.
25. Go To the PPP Config Tab Now and copy all the settings displayed in my Screenshots
26. Still while in the PPP Config Tab go to UM Section and copy my settings exact
Now for Tethered Nai and User ID type in your
(your10digitPhone#)@mymetropcs.com
For you password go to this website and type in your MEID or ESN in the box labeled "Calculate." Once you calculate your password(it will be called MetroPCS MSL) enter into your password box. You may find this on the top of QPST Service programming window. If you look at my pictures its the numbers located on top that are blurred out.
27. One You Have finished in the UM Section of the PPP Config tab go to the AN Tab copy the setting listed in my Screenshot.
This Time you cant enter anything in the tethered nai but in USER ID enter once again (your10digitphone#)@mymetropcs.com and the same MSL password you used before in the last tab.
28. One Finished Hit Write to Phone. You'll Get an Error, but dont worry just ignore it and then unplug your phone and reboot your phone
29. After reboot you may download my rom from here MetroDroid 1.0
and from 1st boot you will have everything working =D. Enjoy

dang good work!
thank you for taking the time to write up a guide! awesome stuff.

yea people kept asking in my rom thread and theres never a guide that explains it in detail so i wrote it up lol thanks =P

im stuck on that MEID/ESN cuz my QPST windows its too small.. cant see all that numbers for that ESN

Wow an evo 4g for metro ? Lolz. I wonder if youll get 4g. Great posting

Ok i did everything right now....
Just installing metrodroid 1.0...
I will let chu know whats that result... in a few mins...

majestic if you go back to cdma workshop it will show your esn there and then just use that =P or if u go to settings>about phone>Phone Identity it will show you meid there

Well we get it working on MetroPCS but we'll never have 4G since MetroPCS will be getting LTE not wimax lol..hopefully they'll atleast update all their markets for 3G =D
-KiiD said:
Wow an evo 4g for metro ? Lolz. I wonder if youll get 4g. Great posting
Click to expand...
Click to collapse

Well i dont have that 67 error no more...
But i still have no web or mms.....
haha im like about to give up lol...

results
what plan do you have? you have to atleast have a $45 plan, and you sure your on metropcs because everything here works fine for me

I think i got that 40 dlrs.. but i dont think that has anything to do with it? it is?
cuz it gives you txt call web mms included it...

should be working just fine then. what area do you live in?

When you say reboot you mean turn off your phone turned it back on by holding down Volumen & power.... then set recovery...
Now
Wipe Data/Factory and Dalvik-Cache
I think here is where im having trouble...
I do see Wipe Data/Factory
But i cannot find Dalvik-Cache ALL I SEE IS CACHE PARTIONS?
so what im doing wrong Bloody...

ahh your using clockwork recovery i dont know much about that recovery. i use Amon_ra theres a thread for his recovery and its very easy to flash in fastboot

Ok let me download it... then i will let chu know hows that metrodroid does after that...

Ok i did everything now... installing metrodroid..
Lets see if it works now... haha

k let me know..if it doesnt work then idk why it wouldnt should work just fine

Well it didnt work for me haha
If someone else does this and it does work pls shared

try using any other sense rom and install autostart from market and then flash the zip from one of the other metropcs guides i forget which one. if that doesnt work then you account must not have data setup correctly

When you dial ##DATA# you dont need to modified there nothing?

Data problems on all roms above 2.3.3

I know i'm not the only one having this problem, its been posted about before but no answers so id like to see if someone else who didn't get to see those can see this and come up with a solution..
I use an unlocked G2X with Cincinnati Bell, currently running Weapon. I have no problem at all on any rom though that is 2.3.3, any rom over that like 2.3.4, 2.3.4 etc data has NEVER worked, not i had it but lost it when i rebooted, never . i've never been able to run CM7 or MIUI because of this, and yes before someone suggests it my APN settings are correct i've checked them 1000 times they are the same as when on 2.3.3 roms, i've hard booted after to try to get data flowing a million times, i've followed installation instructions 100 percent and still have never had data working on those roms.
even on the new CM7 where the APN issue is fixed, data still does not work. Its obviously something in roms over 2.3.3 that is creating this problem. I BEG, BEG someone please help find an answer i would love you and most likely donate. Thanks.

58 views and no ideas? anyone, please?

You obviously haven't been checking the Development Section lately. There are many threads on this issue, and it has been fixed already. (Well, for the most part)

FatalityBoyZahy said:
You obviously haven't been checking the Development Section lately. There are many threads on this issue, and it has been fixed already. (Well, for the most part)
Click to expand...
Click to collapse
obviously you didn't read my post. I have NEVER had data work above roms with 2.3.3, most people have it then lose it. I also stated that the new kernel from ttbal and the newest CM where the issues are supposedly fixed I still can't get data. Please, read my post entirely before replying, thank you.

C-4Nati said:
I know i'm not the only one having this problem, its been posted about before but no answers so id like to see if someone else who didn't get to see those can see this and come up with a solution..
I use an unlocked G2X with Cincinnati Bell, currently running Weapon. I have no problem at all on any rom though that is 2.3.3, any rom over that like 2.3.4, 2.3.4 etc data has NEVER worked, not i had it but lost it when i rebooted, never . i've never been able to run CM7 or MIUI because of this, and yes before someone suggests it my APN settings are correct i've checked them 1000 times they are the same as when on 2.3.3 roms, i've hard booted after to try to get data flowing a million times, i've followed installation instructions 100 percent and still have never had data working on those roms.
even on the new CM7 where the APN issue is fixed, data still does not work. Its obviously something in roms over 2.3.3 that is creating this problem. I BEG, BEG someone please help find an answer i would love you and most likely donate. Thanks.
Click to expand...
Click to collapse
try editing the t-mobiles apn to yours that worked for me on simple mobile on cm7 but on the apn dont delete the password n server i think thats it

Ek07 said:
try editing the t-mobiles apn to yours that worked for me on simple mobile on cm7 but on the apn dont delete the password n server i think thats it
Click to expand...
Click to collapse
Yeah I read this in the other thread unfortunately there isn't a apn at all t mobiles or not on CM when I flash it
Sent from my LG-P999 using xda premium

I've been following the development threads, because I too have been having data issues deeper than just missing APNs. It actually seems to be an issue with the entire radio side as a whole on any rom that's not based on the factory firmware. It's become much more stable, but still I can only get a GPS instant lock immediately after a hard reboot and can only receive multimedia messages immediately after a reboot as well. Another thing I've noticed, is I will get a "No internet connection" warning whenever I open the browser, despite having a data connection, and the page still loads.
Also, why do I have to set all my carrier information (my phone number, and voicemail number specifically) when the other factory firmware roms can pull this from the sim card?
I love all the features of CM7 and it's based roms, but the data stability has made it unusable for me.

Ek07 said:
try editing the t-mobiles apn to yours that worked for me on simple mobile on cm7 but on the apn dont delete the password n server i think thats it
Click to expand...
Click to collapse
You can't edit T-MO's one. You can copy and make a duplicate of that and then edit it, but that just beats the point.
And yeah I STILL have the same problem.
I'm not a t-mobile customer so I need to add my APN manually. And yes after a hard I can see my list of APNs and I'm allowed to add APNs but still no data. even after the latest stable version. And even after that with the Dragon Kernel with the supposed APN fix.
Really hope someone can shed some light here.

C-4Nati said:
obviously you didn't read my post. I have NEVER had data work above roms with 2.3.3, most people have it then lose it. I also stated that the new kernel from ttbal and the newest CM where the issues are supposedly fixed I still can't get data. Please, read my post entirely before replying, thank you.
Click to expand...
Click to collapse
I apologize for my ignorance.

FatalityBoyZahy said:
I apologize for my ignorance.
Click to expand...
Click to collapse
Its ok
Sent from my LG-P999 using xda premium

pyromaniac1 said:
You can't edit T-MO's one. You can copy and make a duplicate of that and then edit it, but that just beats the point.
And yeah I STILL have the same problem.
I'm not a t-mobile customer so I need to add my APN manually. And yes after a hard I can see my list of APNs and I'm allowed to add APNs but still no data. even after the latest stable version. And even after that with the Dragon Kernel with the supposed APN fix.
Really hope someone can shed some light here.
Click to expand...
Click to collapse
in cm7 you can edit the tmobiles apn i done it and i got data
---------- Post added at 11:36 AM ---------- Previous post was at 11:34 AM ----------
C-4Nati said:
Yeah I read this in the other thread unfortunately there isn't a apn at all t mobiles or not on CM when I flash it
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
oh ok try going into recovery menu and wipe all data then boot up again maybe then you can see the apn

Since you are rooted go into adb and try the following. Download the attached zip file and extract the "apns-conf.xml" file and put it in the same directory you run adb from. Then execute the following adb commands.
# adb shell mv /system/etc/apns-conf.xml /system/etc/apns-conf.xml.bak
# adb push apns-conf.xml /system/etc/apns-conf.xml
# adb shell chmod 644 /system/etc/apns-conf.xml
Then go into apn settings and press menu and choose to restore to default. The TMO one will still show but now your Cincinnati Bell one should show also; and it will be a default apn like TMO now (they are on equal footing now). Make sure you press the radio button to make the Cincinnati Bell one green, it it wasn't already. Hopefully your data will work after this. Plus you will now have global apn settings automatically for virtually any sim you use from a GSM carrier worldwide.
(Note: Simple Mobile users don't use this - find my special thread for Simple Mobile users).

jboxer said:
Since you are rooted go into adb and try the following. Download the attached zip file and extract the "apns-conf.xml" file and put it in the same directory you run adb from. Then execute the following adb commands.
# adb shell mv /system/etc/apns-conf.xml /system/etc/apns-conf.xml.bak
# adb push apns-conf.xml /system/etc/apns-conf.xml
# adb shell chmod 644 /system/etc/apns-conf.xml
Then go into apn settings and press menu and choose to restore to default. The TMO one will still show but now your Cincinnati Bell one should show also; and it will be a default apn like TMO now (they are on equal footing now). Make sure you press the radio button to make the Cincinnati Bell one green, it it wasn't already. Hopefully your data will work after this. Plus you will now have global apn settings automatically for virtually any sim you use from a GSM carrier worldwide.
(Note: Simple Mobile users don't use this - find my special thread for Simple Mobile users).
Click to expand...
Click to collapse
Thanks for the help, I'm not where near an xda and phone "noob" but i have never used adb I wouldn't feel comfortable trying to do that if it risks bricking my phone. Unless you have any opinion on how doing it or if its not really complicated I don't think I will try that.

C-4Nati said:
Thanks for the help, I'm not where near an xda and phone "noob" but i have never used adb I wouldn't feel comfortable trying to do that if it risks bricking my phone. Unless you have any opinion on how doing it or if its not really complicated I don't think I will try that.
Click to expand...
Click to collapse
There is no risk of bricking your phone if you stick to the commands I gave you. Just highlight and copy them and you can paste them into the command prompt window by right clicking and selecting paste.
Download the attached zip with the adb.exe and two dlls need for it to run. All you are doing is backing up the apn configuration file, replacing it with a new one and setting permissions so the phone can use the new file. Then you reset the apns to default and the phone will set the apns from that file based on the sim in the phone.
Go into settings, applications and turn on usb debugging, if it is not on already. Then connect your phone to your computer and make sure the adb drivers load (you can find the driver pack by searching this site or installing them from the LG Updater app). To make sure the phone is connected in the command prompt window type "adb devices" and hit enter. The phone should be shown as connected. If not, the drivers are not installed.
Run the command prompt from the same directory where you unzip the three adb files and put the apns-conf.xml file in the same directory. That makes it easier for you to do this. It is actually quite simple and will take only a minute or so.

Flashable zip to replace apns-conf.xml file
Here is a flashable zip that can be installed with clockworkmod recovery. It does the same thing but does not back up your existing file. If you are running a stock rom this will prevent an ota from installing. If you are running a custom rom it doesn't matter as you cannot get ota updates anyway.
Just boot into CWM recovery and flash this zip file. Reboot and reset your apns to default.

Ok sweet, should i flash it while on my current rom that works or flash CM7 then flash it?
quick edit- it won't effect my phone being unlocked and lock it will it? after those questions i'm done asking and i will give it a try good sir thanks

Bump
Sent from my LG-P999 using xda premium

C-4Nati said:
Ok sweet, should i flash it while on my current rom that works or flash CM7 then flash it?
quick edit- it won't effect my phone being unlocked and lock it will it? after those questions i'm done asking and i will give it a try good sir thanks
Click to expand...
Click to collapse
The phone remains unlocked once you unlock it. Nothing you will do will relock it.

jboxer said:
The phone remains unlocked once you unlock it. Nothing you will do will relock it.
Click to expand...
Click to collapse
I did your suggestion, flashed the zip. Still didn't work
Sent from my LG-P999 using xda premium

I have some problem and something more.
GPRS data will not work, my default APN is mss.life.com.by, and I see arrows in my status bar, but internet not worked.
So, I changed it to internet.life.com.by(got it from operator instructions) and I anymore see arrows and internet still not work.
I have an idea with broadband, I think in my country other radio frequency.
But I can find other broadband for LG G2x

Nexus S 4G - Wimax Mac Address

Is there any way to change the Wimax MAC address on the Nexus S 4G? The phone is rooted, with the stock image (I'd prefer to keep the stock image). I'm hoping to change the MAC address and realm, similar to this: http://forum.xda-developers.com/showthread.php?t=2255067

xur17 said:
Is there any way to change the Wimax MAC address on the Nexus S 4G? The phone is rooted, with the stock image (I'd prefer to keep the stock image). I'm hoping to change the MAC address and realm, similar to this: http://forum.xda-developers.com/showthread.php?t=2255067
Click to expand...
Click to collapse
If you dial *#*#DEBUG#*#* (*#*#33284#*#*) and type in your MSL you can follow the same method as found in the thread you linked in your original post

beneath-a-burning-turtle said:
If you dial *#*#DEBUG#*#* (*#*#33284#*#*) and type in your MSL you can follow the same method as found in the thread you linked in your original post
Click to expand...
Click to collapse
I don't have the phone on me right now, so I can't check, but I am swear I did exactly that, and couldn't find it. Are you on the stock rom?
Are you doing this?
*#*#DEBUG#*#* > WiMAX CT > Open Device.. Edit MAC and hit set.
Do I have to install a special apk or something?

xur17 said:
I don't have the phone on me right now, so I can't check, but I am swear I did exactly that, and couldn't find it. Are you on the stock rom?
Are you doing this?
*#*#DEBUG#*#* > WiMAX CT > Open Device.. Edit MAC and hit set.
Do I have to install a special apk or something?
Click to expand...
Click to collapse
I'm on my PA 3.60 build, I'm almost positive after you change anything in the service menus you have to reboot afterwards, so I would give that a shot as well. I don't have any 4G coverage in my area from anyone (except all that damn LTE everywhere) so I have no reason to try and change it, but I'm pretty sure this is the method

[Q] DROID3 XT862 for pageplus and T-Mobile

Hi,
The system version is 5.7.906.XT862.Verizon.en.US
It was unlocked, rooted and installed root explorer ready to modify to work with US GSM ( Lycamobile also)
Here is where I got info to follow
http://forum.xda-developers.com/showthread.php?t=1989359
However, I have some concerns need help
1- will the instruction and the first build.prop file in the above link will work with my phone?
2- Can I use the phone with both pageplus ( being flashed with TalkForGood) and T-Mobile ( Lycamobile later)? I saw the same question without answer here http://forum.xda-developers.com/showthread.php?t=1425519
3- Can I use the phone oversea as a global phone without a need to follow the above link in Non-US GSM Networks session?
4- In case I want to go back stock image ( revert to the original one after messing it up), how?
To Skreelink, thank for your instruction but can you or anyone show me where to do the "required options" part because I simply couldn't find what you mentioned in my phone under Wireless & Network setting -> Mobile Network.
( I tried to post this under the above post but couldn't)
Thanks

macarong1 said:
Hi,
The system version is 5.7.906.XT862.Verizon.en.US
It was unlocked, rooted and installed root explorer ready to modify to work with US GSM ( Lycamobile also)
Here is where I got info to follow
http://forum.xda-developers.com/showthread.php?t=1989359
However, I have some concerns need help
1- will the instruction and the first build.prop file in the above link will work with my phone?
2- Can I use the phone with both pageplus ( being flashed with TalkForGood) and T-Mobile ( Lycamobile later)? I saw the same question without answer here http://forum.xda-developers.com/showthread.php?t=1425519
3- Can I use the phone oversea as a global phone without a need to follow the above link in Non-US GSM Networks session?
4- In case I want to go back stock image ( revert to the original one after messing it up), how?
To Skreelink, thank for your instruction but can you or anyone show me where to do the "required options" part because I simply couldn't find what you mentioned in my phone under Wireless & Network setting -> Mobile Network.
( I tried to post this under the above post but couldn't)
Thanks
Click to expand...
Click to collapse
1: The link you provided is my information and files for KEXEC ROMs, such as CM10.2 or AOKP. For the stock rom (As you listed 906), you will want to go here.
2: If you flash the XT883 radio for US GSM networks (like T-Mobile) you will not be able to flip between them via software toggle, you will have to flash the stock radio + swap build.prop back to stock and OTA on PagePlus, vice versa when you want to use the other network. (I wanted the same thing, I solved it by getting a Motorola Razr M XT907). The main reason for this is; The XT883 radio expects an RUIM card (CDMA version of SIM) and without it, puts it in emergency only mode. Verizon/PagePlus/Sprint/other US CDMA networks do not use the RUIM so no real way around this.
3: To use it as a global phone, just restore the stock radio and build.prop, it should work without issue WITHOUT MODIFICATION, as long as you have input the SIM unlock code to unlock the phone. You *can* use the XT883 radio globally, but both radios will work for global GSM.
4: To return to stock, follow this thread.

thank you
The best answer I have ever seen.
So if I buy Motorola Razr M XT907 to achieve the goal Pageplus/T-mobile, where is the best procedure I should follow?
Thank you very much.
McR

Help please
Skreelink said:
1: The link you provided is my information and files for KEXEC ROMs, such as CM10.2 or AOKP. For the stock rom (As you listed 906), you will want to go here.
Click to expand...
Click to collapse
I follow the above link to flash my Droid3 with the current stock image.
The flash was done then I rebooted the phone.
However, I was unable to replaced the build.prop file
I couldn't change its properties or owner or overwrite the file.
I see the instruction here http://forum.xda-developers.com/showthread.php?t=1406812&page=3
but I couldn't overwrite the original file with the modified one.
I rooted the phone already.
I am not sure what I did was wrong.
Please help.
Thanks,

macarong1 said:
I follow the above link to flash my Droid3 with the current stock image.
The flash was done then I rebooted the phone.
However, I was unable to replaced the build.prop file
I couldn't change its properties or owner or overwrite the file.
I see the instruction here http://forum.xda-developers.com/showthread.php?t=1406812&page=3
but I couldn't overwrite the original file with the modified one.
I rooted the phone already.
I am not sure what I did was wrong.
Please help.
Thanks,
Click to expand...
Click to collapse
You either have to use adb or a root browser. Rom Toolbox Lite has one, ES File explorer also has one. I'm sure other apps have a root browser, but I've not used others.Rom Toolbox's root browser allows you to longpress for a menu to change permissions.

Help please
Skreelink said:
You either have to use adb or a root browser. Rom Toolbox Lite has one, ES File explorer also has one. I'm sure other apps have a root browser, but I've not used others.Rom Toolbox's root browser allows you to longpress for a menu to change permissions.
Click to expand...
Click to collapse
Thank you for your fast reply.
I use totalcommander that run with superuser permission.
With a long press on the file, I go to property and set up with all permission ( 777)
After I hit OK to confirm the change, nothing happens but when I check again, it is still (rw-r--r--)
I have superuser installed.
I am stuck now.
Is there a way to browse and copy overwrite via windows or before the phone is up ( using usb cable)
Help please

macarong1 said:
Thank you for your fast reply.
I use totalcommander that run with superuser permission.
With a long press on the file, I go to property and set up with all permission ( 777)
After I hit OK to confirm the change, nothing happens but when I check again, it is still (rw-r--r--)
I have superuser installed.
I am stuck now.
Is there a way to browse and copy overwrite via windows or before the phone is up ( using usb cable)
Help please
Click to expand...
Click to collapse
If the permissions are not sticking, then the app you're using either does not have root privledges, is not performing correctly, or your root isn't correct. Try updating your superuser binary via the superuser app. Although, rw-r--r-- should be just fine, 777 would 'pose' a security threat since it would allow any app to modify it. Long as you replace it with the one required for GSM, rw-r--r-- permissions should work.
macarong1 said:
The best answer I have ever seen.
So if I buy Motorola Razr M XT907 to achieve the goal Pageplus/T-mobile, where is the best procedure I should follow?
Thank you very much.
McR
Click to expand...
Click to collapse
Sorry, didn't see this until now... getting the Razr M on pageplus is a real pain, though T-Mobile would be simple. It's a matter of getting the computer to read the diag port (you have to manually select the driver) and simply editing ONE NV-Item, then any GSM sim will work (AT&T, T-Mobile, etc).
Here is one of my posts with a quick guide about unlocking a razr m for gsm.

THANK YOU
Skreelink said:
You either have to use adb or a root browser. Rom Toolbox Lite has one, ES File explorer also has one. I'm sure other apps have a root browser, but I've not used others.Rom Toolbox's root browser allows you to longpress for a menu to change permissions.
Click to expand...
Click to collapse
I install Rom Toolbox Lite, it failed to verify root.
I check in SuperUser app and found a check mark "Temp Unroot"
I clear and run update for superuser.
Then I remove Rom ToolBox Lite and install again.
I then use Root browser from its link.
Each time it prompts permission of su.
I copy and paste sucessfully.
Reboot the phone and it work in T-Mobile NOW.
It WORKS now.
Thank you so much.
According to your answer in my first post, I can use this phone with GSM oversea without modification ?
Can you help on the link to the instruction of the phone model that can toggle between Pageplus/T-mobile.
I am much appreciated your help.

macarong1 said:
I install Rom Toolbox Lite, it failed to verify root.
I check in SuperUser app and found a check mark "Temp Unroot"
I clear and run update for superuser.
Then I remove Rom ToolBox Lite and install again.
I then use Root browser from its link.
Each time it prompts permission of su.
I copy and paste sucessfully.
Reboot the phone and it work in T-Mobile NOW.
It WORKS now.
Thank you so much.
According to your answer in my first post, I can use this phone with GSM oversea without modification ?
Can you help on the link to the instruction of the phone model that can toggle between Pageplus/T-mobile.
I am much appreciated your help.
Click to expand...
Click to collapse
The Droid 3 requires flashing the radio and build.prop to swap between CDMA/GSM
UNLESS it it is a foreign GSM network like Rogers in Canada, then the stock radio works without modification. The XT907 Razr M can do a software toggle between them (Network mode under Mobile Networks like the D3) but setting up PagePlus requires a lot of work for data, though GSM is a lot easier to get working than the D3. You can still go ahead and activate the D3 on pageplus, just after you flash between radios, you have to OTA program each time.

question for help
Skreelink said:
The Droid 3 requires flashing the radio and build.prop to swap between CDMA/GSM
UNLESS it it is a foreign GSM network like Rogers in Canada, then the stock radio works without modification. The XT907 Razr M can do a software toggle between them (Network mode under Mobile Networks like the D3) but setting up PagePlus requires a lot of work for data, though GSM is a lot easier to get working than the D3. You can still go ahead and activate the D3 on pageplus, just after you flash between radios, you have to OTA program each time.
Click to expand...
Click to collapse
Thank you.
I think I can do the same process with the image file from the original and overwrite the build.prop with original.
I did back up the build.prop but not the radio.img
Where can I find the Droid 3 radio.img of 906 version?
I want it simple as a reverting from what I did because I already removed all Verizon apps and install my apps in the current image.
A recovery task can bring back the original image.
** Oversea I meant is Vietnam
Thank again,

macarong1 said:
Thank you.
I think I can do the same process with the image file from the original and overwrite the build.prop with original.
I did back up the build.prop but not the radio.img
Where can I find the Droid 3 radio.img of 906 version?
I want it simple as a reverting from what I did because I already removed all Verizon apps and install my apps in the current image.
A recovery task can bring back the original image.
** Oversea I meant is Vietnam
Thank again,
Click to expand...
Click to collapse
I will see about uploading the stock radio when I get home.

THANK YOU
Skreelink said:
I will see about uploading the stock radio when I get home.
Click to expand...
Click to collapse
I am waiting.
Thank you sir ( my guess)

macarong1 said:
I am waiting.
Thank you sir ( my guess)
Click to expand...
Click to collapse
Sorry it took me so long, I had a long hectic day, but Here it is.
Just flash it like you did the XT883 radio and put a stock build.prop in (you should have backed up the original). Then you should be able to OTA program with *228 if it's activated on pageplus.

THANK YOU
Skreelink said:
Sorry it took me so long, I had a long hectic day, but Here it is.
Just flash it like you did the XT883 radio and put a stock build.prop in (you should have backed up the original). Then you should be able to OTA program with *228 if it's activated on pageplus.
Click to expand...
Click to collapse
I understand.
Thank you.
You are the best in my eyes