Related
hey guys. Long story short, i had my first captivate for almost more than a year, rooted it and had all the fun with it. Then, the screen cracked, i used my insurance and got a new captivate. But, after 3 months of being super busy... I figured id rather just send the new (unrooted, uncracked) captivate back, get my refund, and go back to using my old captivate, that is already rooted has all my contacts and so on. Now....as i said its been quite a while, so i am definitely rusty. First question is that i remember that since i was rooted i was able to download apk files and install them onto my phone when it waas plugged into my pc. I definitely remember using a program and having to restart the phone and apply changes or something like that. But, i don't remember the name of the program nor how i am actually suppose to do it. Also if someone can point me in the right direction and tell me what update and what not i am supposed to be on. My captivate is just rooted with a lag fix i believe. Yet, its still really slow and laggy, even overclocked... So im hoping that the new updates will be more efficient; in being fast without taking up all my battery. in my "about phone" it reads:
firmware: 2.1 update 1
kernel version 2.6.29
[email protected]#voodoo_lagfix_3.0_v1.10
Build number: ECLAIR
sorry for being so ignorant. Its just that it has been a while, and i don't want to start off my current rooting experience on the wrong foot.
are you referring to "quickboot" for easy rebooting? you may also want to look into Autokiller memory to help kill the junk. I also used ryan's OCLF.
I like you ran a rooted captivate for the longest time. it worked decently but then I tried to go to Gingerbread. MISTAKE. it was laggy bad and very unstable (Used Cezar's ROM). I didnt like it. Flashed back to the 2.2 rom (supposedly stock) and it was terrible compared to how it was. lots of lag and just overall... YUCK.
so yesterday I got the guts to flash a custom rom. I was mad at the phone so I flipped thru several flavors and ended up putting the Phoenix Ultimate (JS7) on it. HOLY S**t Balls mom!!! it was super fast, extremely responsive and worked like a dream. took me a little while to do it, (I had to flash to 2.1 (you are there), root it, cyanogenmod, then Phoenix) but it is SOOOO worth it. super fast now. my wife is asking me to do hers...ugh...
also, all the animations, graphics and just in general. it feels like I got a brand new phone. I could not be happier
thanks for the reply. Haha sounds like you have an iphone status phone now that's what im shooting for; something fast and reliable. Im going to wait and see what the majority of people like on they're captivates. So i am waiting on standby until i know exactly what and how to do it. And no, the program i believe was only on my computer. i would plug in my phone, drop in the apk file.,remove the phone, and do that recovery mode reboot thing on my phone so that the application i just dropped in installs. Sorry if what im saying doesn't make sense like I've said its been a while -.-
the program you are thinking of is the sideload wonder machine
and yes you are on a very outdated version of android, 2.1 (eclair) there has been an official update to 2.2 (froyo) and also many leaks of 2.3.x(gingerbread) but nothing officially from at&t since froyo.
noone can really tell you what you will like best, you will have to do what the rest of us do and read, read, read, then read a bit more, flash a few to try and pick what you like the best....
thank you! it was SWM.
NOW
what is MIUI, cm7 and pinnacle? custom flashes or something? i am also running my current root with launcher pro. Most of everyone on this thread seem happy with their setup as far as smoothness,responsiveness, and battery life go, which is exactly what i want!
MIUI/CM7 are AOSP versions if 2.3.x,aka gingerbread. Pinnacle is a leaked version of Gingerbread, made for the captivate by Samsung.
so gingerbread is the way to go? or rather should i say 2.3.. how hard is it for me to upgrade to 2.3 i noticed that some apps aren't even available to me in the market on 2.1. but still i want the features that 2.3 has. Besides just updating to a version of gingerbread, what are the other common things people do for anti-lag/responsiveness, while still being conservative on the battery aspect.Thanks for all the help so far guys!!!
I wasn't pleased with the gingerbread as of yet. It will get better I'm sure of it. Try out one of the 2.2 based roms as they are the most stable at this point.
Sent from my Phoenix JS7 run Samsung Captivate
so what do i do? Just get one of the 2.2's that a developer on here made? that way it has pre made fixes and stuff like lagfix already in it correct? how do i go about installing that and from where?
This thread is the best start.
http://forum.xda-developers.com/showthread.php?t=887525
after looking that over, I followed this one:
http://forum.xda-developers.com/showthread.php?t=884364
and had chosen the Phoenix ROM.
thannks but im still comopletly clueless. What exactly is it that i have to do. I know where to find the .zip rom files, but what is a kernel to a ROM? I really dont get it. does the ROM include the build like 2.2 or 2.3 or what not?
just out of curiosity, do you have AT&T captivate or rogers?
what is Rogers?
Yes. I have AT&T samsung captivate
Rogers is a rom version. You are on stock but rooted. The second link has very easy step by step instructions. The rom u get will have all u need including the kernel and modems
1. Back up ur data with titanium backup. If u don't have it, check market.
2. Flash ur phone with Odin
3. One the flash is done to stock do a master clear with Odin (your phone is on, plugged in and USB debugging)
4. Install the root per directions
5. Copy clockwork and the rom. Of ur choice to ur internal zip
6. Install the clockwork recovery (you run it twice back to back)
7. Run the new rom install with clockwork
I. Phone boots to new rom.
First time it takes about an hour. MAKE SURE YOU READ THE DIRCTIONS IN MY PREVIOUS POST.
Sent from my SAMSUNG-SGH-I897 using XDA App
^^Rogers isn't a ROM version. It's a Canadian cell service provider...
thanks for clearing that up. Had no idea what Rogers was lol. Ok so, i guess i just download and install a ROM of my liking? that will also update me to froyo or 2.3 as well? any recommedations as for as ROMS go?
I stand corrected. The rom will upgrade you to what it is based on. The one I use is froyo based. There are gingerbread roms too. Mosaic seems to be a popular one as was Phoenix that I am running. Best advice.. go read those threads. Look at screenshots they have and the user feedback
Sent from my SAMSUNG-SGH-I897 using XDA App
Personally, I'm a huge fan of DesignGears' roms. I'd suggest you go with something like Cognition 5v2. Its 2.3.3, very stable, very fast, and, since you've only used stocks rom up 'til now, it'll be very familiar (minus all the bloatware). He's also got a step by step guide on how to install the rom. http://forum.xda-developers.com/showthread.php?t=1127578
i was trying to get to use that ROM^^ buuut i had to go to rooted 2.3 first. used this thread http://forum.xda-developers.com/showthread.php?t=1127249&page=31
then i hit a problem, i posted on that thread as well still waiting for a response. idk what happened to my phone...this is my post on that thread "ok so i did this and i hit a problem. I got up to the red fish, i turned off the phone to get it into download mode again. and i did, Placed the kernelKF1.tar file in the pda slot and hit start on odin my phone reboots and right after the AT&t logo my screen goes crazy. it looks as if my screen is tripping on acid... and it just keep looping att logo then that. What should i do? i need the files on my phone atleast its not completly bricked"
bump for a reply....
Forgive the title, I need it to make it interesting to get some views. Now that's said, let me get to it.
I recently tried to flash MIUI onto my Samsung Infuse. I had Infused ROM v.2.2.3. I must have messed up because now I'm having trouble getting my phone to start. When I power on, it briefly shows the Samsung logo (for about 3 sec); then for split second an alternate screen flashes on my screen just before my phone shuts off. Now, I've tried to load CWM(red version) with the 2/3 button technique; however, I haven't been able to get into that GUI.
I have been able to get into the Download screen, for Odin. But, I was hoping there might be some sort of way to solve this problem without resetting my phone to stock.
Questions
1. Can I utilize the Download screen to re-implement or re-flash my ROMs on my phone; without loosing data
2. Is there a way that I can force my way into the CWM GUI?
3 If none of the above are possible, where can I get information Odin for the Infuse; and where can I download the program?
Thank you for reading, and thanks for the help in advance!
Joaquin
I wasn't going to reply to your thread but you caught me in a good mood. head over to the dev forum and you will find everything you need to get your phone back. That's all I'm goin to give you. the more you search and experiment the more you will learn
Already found somethings that are helping...
I didn't post for as a resource, just thought that if someone knew where to look they'd point me in the right place.
For anyone who might need a nudge; this link will direct you to complete recovery http://forum.xda-developers.com/showthread.php?t=1092021
Did you follow the directions exactly as it says? Did you ever get into blue cwm and flash miui a second time?
Sent from my SGH-I997
I wouldn't recommend MIUI to anyone who isn't atleast a little experienced in flashing ROMs, and are sure won't panic if they find their system soft bricked.
went to http://galnetmiui.co.uk/landing/weekly-builds/ downloaded infuse rom using miui build 112230 wiped data,cache,dalvik applied installed galnet miui rebooted does not load stays on samsung logo wiped data,cache,dalvik reinstalled galnet does not work, used blue cwm, returned phone to stock froyo, using odin reinstalled galnet using green cwm, still doesnt work, dont know what im doing wrong, please help, do i need to install gb bootloaders?
Sent from my SGH-I997 using xda premium
so my sgs4g was rooted and got on gb with the gb starter pack thread, after which i jumped around between a few roms and am currently running octaneGB.
however, it has always had stability problems, and i can't figure out why. possibly because i messed up bootloaders? i'm pretty sure it can't be the fault of the roms i flashed.
from here, all I want is a stable phone.
can i wipe the phone as it is and then use the oneclick heimdall SMS kj6? would this put me on rooted GB with CWM and good bootloaders? could i simply cwm flash a rom like valhalla after that?
any advice would be appreciated, thanks!
nvertigo said:
so my sgs4g was rooted and got on gb with the gb starter pack thread, after which i jumped around between a few roms and am currently running octaneGB.
however, it has always had stability problems, and i can't figure out why. possibly because i messed up bootloaders? i'm pretty sure it can't be the fault of the roms i flashed.
from here, all I want is a stable phone.
can i wipe the phone as it is and then use the oneclick heimdall SMS kj6? would this put me on rooted GB with CWM and good bootloaders? could i simply cwm flash a rom like valhalla after that?
any advice would be appreciated, thanks!
Click to expand...
Click to collapse
Yes, you can use the one-click to put KJ6 on there then flash a different ROM via CWM.
Personally I've had the best experience with Valhalla ROMs. Last night I just flashed RAVERX3X latest Valhalla Black build. Its low profile so it's quick and responsive, and even better, not a single instability issue.
Sent from my SGH-T959V using XDA App
thanks for the advice guys!
I did the first flash step, which worked successfully and rebooted my phone. then i tried to flash the bootloaders that came with it, but uploading PIT 1/10 failed, and it froze trying to end session. i pulled the battery and the phone seemed bricked, but i connected the cable and oneclick said it was connected (no download mode screen, no lights at all). so i did the initial one-click flash and let it reboot again, then flashed valhalla black.
nothing SEEMS to be wrong, but i'm a little scared. can anyone weigh in on what happened?
You're ok. I can't explain what happened but people have reported similar issues, nothing on the screen but it can be seen in ODIN, and were able to recover (as you did) just fine.
Sent from my SGH-T959V using XDA App
This section of XDA is small, but good in terms of quality.
I just flashed Raver's Cyanogenmod/Valhalla hybrid and it is smooth and stable.
One-Click...
At the beginning of the week, I still had Froyo on my device.
I used Bryan's one-click (SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click.jar)...
(I had a scare, too... which involved the so-called "Rainbow screen" -- but FB suggested I run the one-click, again and also to do the Bootloaders -- and everything turned out ok).
But, I needed to get CWM 5 (and, that particular one-click had CWM 3.0.2.8x)
So, I flashed an update of Bryan's kernel (sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip)
And, because I was feeling overjoyed at all the goodness that I'd seen so far, I flashed RaverX3X's rc3.zip (from Team Acid's Source Forge site)...
And, life is really, really, really... good.
yep
+1 Valhalla black edition! Installed today and love love love.
ok... my phone is now crashing and rebooting all over the place after flashing valhalla black. it seemed fine for the first hour. should i try the one-click again? or did i not wait 10 minutes after flashing the rom, maybe?
anyone know what could be the problem?
thanks in advance!
nvertigo said:
ok... my phone is now crashing and rebooting all over the place after flashing valhalla black. it seemed fine for the first hour. should i try the one-click again? or did i not wait 10 minutes after flashing the rom, maybe?
anyone know what could be the problem?
thanks in advance!
Click to expand...
Click to collapse
Not sure about the crashing but I experienced reboots because of the kernel Valhalla Black uses. There are fixes out there for that part of the problem but what you should really is perform a factory data reset, do the one to get a ROM with CWM on it, then use CWM to install Valhalla Black per the instructions on the page for it. I've a feeling you'll be much more stable after that.
As for the 10 minutes, that's basically to allow your phone to rebuild the Davlik cache (cache with optimizations for your apps). Definitely let it sit while it does that just to be safe.
thanks yet again. will try this asap!
can i assume that my bootloaders are correct after the weird issues from the last page? you mentioned that it happened to several people, but it still bothers me that technically it never got past 1/10 uploading PIT file :x
also, regarding the problems with the kernel, can anyone point me to a kernel that works with valhalla final and is known to be fully stable? i want to try to do everything to get the phone usable.
nvertigo said:
thanks yet again. will try this asap!
can i assume that my bootloaders are correct after the weird issues from the last page? you mentioned that it happened to several people, but it still bothers me that technically it never got past 1/10 uploading PIT file :x
also, regarding the problems with the kernel, can anyone point me to a kernel that works with valhalla final and is known to be fully stable? i want to try to do everything to get the phone usable.
Click to expand...
Click to collapse
If it was fully booting and you weren't getting the "rainbow" screen, then your boot loaders are fine. If in doubt, go check out bhundven's one-clicks, and run one of them - twice. The first time it doesn't let you check the boot loader box but the 2nd time it does.
Valhalla Final comes with bundven's beta 2c kernel. I believe people are running that without issue. Keep in mind Valhalla Final and Valhalla Black are two different ROMs with two different kernels.
I did a one-click back to stock (factory reset, cache wipes, etc.) & am running bhundven's latest beta kernel with no problems (thus far).
This isn't the first time I've flashed but this is the first time I've encountered this much trouble so here's the story:
I've put in a CWN-Based recovery, and I've tried to flash OverDrive ROM, when I boot into the ROM I get a blank screen and nothing happens. I've tried adding the PicaSticks Kernel to is as well, and I get a red "Hello" (not the a full startup screen) and then back to the blank again. I also tried one other ROM (the name escapes me), both ROM's claiming to have the blank screen fixed.
Also, If I flash to a Gingerbread, and my phone has been activated once before (it's off right now I have paid it yet this month), do I still need a Froyo before I can upgrade it to Gingerbread?
Any help at all with this is appreciated, thanks in advanced.
Update: I got Xionia to flash into it and I've wiped all the things it says to do prior to installing, then I'm installing Overdrive 2.2 (Android 2.2.2) de-odexed and I get a blank screen still. Not sure what to try from here. I also cannot even flash a different kernel. I feel so stupid here.
I am really not able to understand your queries.
Could you please start from the beginning :fingers-crossed:
Fairly new to alot of this...please forgive me. I have scoured forums and cannot find an answer to my problem. I got a new S2 about a month ago and I rooted it no prob. When I tried to install CYM 10 (stable and nightlys) It installed but the wifi and radio are shut off. Found a rooted stock and was using it as it was better than what I had stock on the phone but not being able to do it bothered me. After many posts regarding some of these issues with other phones, I have: Updated my prl and anything else I could update successfully, tried again and same problem. I tried turning on, up, down, and everything else I could do with the settings having no wifi or data and went back to the rooted stock. I flashed a radio update sucessfully and then tried messing with Kernals. Dragonics ROM comes with a new kernal flash among many other things and I tried that, installed sucessfully but still not wifi or radio....I even tried flashing older roms and kernals and still nothing.
As of right now I am back to the rooted stock running stupid themes to make me feel like I did something. I cannot find a direct answer to this regarding my model and that I have not tried. This has become an obsession...I HAVE to make this work. Please Help me.
Again, fairly new here and to forums in general and sorry if I did any of this wrong...