Related
Hello,
I have an Evo Shift stuck in the boot loop. As soon as I put the battery in all it does is reset itself to the screen with the white background and green "HTC" logo, and will keep restarting until the battery dies.
If I hold volume down and turn it on, it does go into the bootloader, but picking ANYTHING, such as recovery or factory reset, does nothing but sending it back to the HTC screen.
I have tried flashing the RUU.exe (2.27.651.2) through Fastboot USB and it completed successfully, but it just restarts right back to the HTC screen. I have also put PG06img that I found on here on the root of my card, and it will never load it up.
Are there any other solutions anyone can think of? They would be much appreciated. I see a lot of these threads for regular Evos, but not for Shifts.
The only other thing I really know about the phone is that it is:
S-On
Hboot- 0.98.0001
Radio- 1.08.00.0506
Thank you so much for all of your help!
Seems to me you aren't rooted and that's more than likely your problem, boot into fastboot and use the ruu application for gingerbread.
Sent from my PG06100 using Tapatalk
Rooster85 said:
Seems to me you aren't rooted and that's more than likely your problem, boot into fastboot and use the ruu application for gingerbread.
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
While I am pretty sure I am not rooted, if you are talking about the early RUU release; 1.17.651.1, the application starts and then ends up failing in the beginning of the process. Is this what you are talking about? The drivers should be all good, the application starts to flash and then dies though. Thanks!
samcrac said:
While I am pretty sure I am not rooted, if you are talking about the early RUU release; 1.17.651.1, the application starts and then ends up failing in the beginning of the process. Is this what you are talking about? The drivers should be all good, the application starts to flash and then dies though. Thanks!
Click to expand...
Click to collapse
Use the new RUU. But make sure your SD card is formatted to a FAT32 partition. (Stock 2gig sd card and some other store boughts are not)
You can format on your computer and then place the RUU on the root of sd card again
(Bootloader won't recognize the ruu zip if not partitioned)
Sent from my Supreme Shift
notsointeresting said:
Use the new RUU. But make sure your SD card is formatted to a FAT32 partition. (Stock 2gig sd card and some other store boughts are not)
You can format on your computer and then place the RUU on the root of sd card again
(Bootloader won't recognize the ruu zip if not partitioned)
Click to expand...
Click to collapse
Ok, I just did this, everything updated fine and all completeted on the bootloader. It then said "press power to reboot." I did so, and went right back into the same boot loop. Any other ideas. I figured running this, and the RUU.exe on the computer were the sure fire ways to get this thing working again???
samcrac said:
Ok, I just did this, everything updated fine and all completeted on the bootloader. It then said "press power to reboot." I did so, and went right back into the same boot loop. Any other ideas. I figured running this, and the RUU.exe on the computer were the sure fire ways to get this thing working again???
Click to expand...
Click to collapse
So just a little information.
you said your not rooted?
So that means you have no ability to flash anything because you have no custom recovery and the bootloader isnt unlocked (S-on)
So what DID you do before it bootlooped? there had to have been something you were trying to do.
Not trying to blame anything on you at all just want to make sure we are helping the most accurate way possible
notsointeresting said:
So just a little information.
you said your not rooted?
So that means you have no ability to flash anything because you have no custom recovery and the bootloader isnt unlocked (S-on)
So what DID you do before it bootlooped? there had to have been something you were trying to do.
Not trying to blame anything on you at all just want to make sure we are helping the most accurate way possible
Click to expand...
Click to collapse
No I hear ya. I was sold the phone fairly cheap and was told "all you need to do is to reinstall the RUU, that is all that is wrong." Obviously I was skeptical, but when I checked everything out, everything looked good, and again, for the price, I knew it was a gamble. That being said, I'm sure something was tried in order to modify the phone and this is how it got like this.
I have soft bricked my old Evo 4g a handful of times and an RUU or Rom flash would always solve the problem.
Anyway, there is no custom recovery, and I'm pretty sure theres no root because it is still "S-ON," I am just trying to see if anyone here has any more info before it goes in for repair.
The only last thing I would guess you MIGHT be able to do is to install a custom recovery, but is there ANY way to do this by just being in the bootloader and using FASTBOOT USB? Any more help is greatly appreciated. Thanks!
samcrac said:
No I hear ya. I was sold the phone fairly cheap and was told "all you need to do is to reinstall the RUU, that is all that is wrong." Obviously I was skeptical, but when I checked everything out, everything looked good, and again, for the price, I knew it was a gamble. That being said, I'm sure something was tried in order to modify the phone and this is how it got like this.
I have soft bricked my old Evo 4g a handful of times and an RUU or Rom flash would always solve the problem.
Anyway, there is no custom recovery, and I'm pretty sure theres no root because it is still "S-ON," I am just trying to see if anyone here has any more info before it goes in for repair.
The only last thing I would guess you MIGHT be able to do is to install a custom recovery, but is there ANY way to do this by just being in the bootloader and using FASTBOOT USB? Any more help is greatly appreciated. Thanks!
Click to expand...
Click to collapse
It shouldn't have a custom recovery if it shows s-on.
I don't see why the RUU wouldn't work.
Honestly it doesn't sound like a softbrick- sounds like its just bricked (Which ive only heard of 1 Shift getting bricked completley)
notsointeresting said:
It shouldn't have a custom recovery if it shows s-on.
I don't see why the RUU wouldn't work.
Honestly it doesn't sound like a softbrick- sounds like its just bricked (Which ive only heard of 1 Shift getting bricked completley)
Click to expand...
Click to collapse
Make it 2! Thanks for your help though!!!
Also Stuck In A Bootloop
samcrac said:
Hello,
I have an Evo Shift stuck in the boot loop. As soon as I put the battery in all it does is reset itself to the screen with the white background and green "HTC" logo, and will keep restarting until the battery dies.
If I hold volume down and turn it on, it does go into the bootloader, but picking ANYTHING, such as recovery or factory reset, does nothing but sending it back to the HTC screen.
I have tried flashing the RUU.exe (2.27.651.2) through Fastboot USB and it completed successfully, but it just restarts right back to the HTC screen. I have also put PG06IMG that I found on here on the root of my card, and it will load it up (I'll see the blue loading bar and then the brown loading bar in the top right hand corner of the screen), but it then checks it again, and then goes back to the original screen for the bootloader.
Are there any other solutions anyone can think of? They would be much appreciated. I see a lot of these threads for regular Evos, but not for Shifts.
The only other thing I really know about the phone is that it is:
S-On
Hboot- 0.98.0001
Radio- 1.08.00.0506
Thank you so much for all of your help!
Click to expand...
Click to collapse
I'm trying to resolve a very similar problem as him, but I know of the history of my phone (since I'm the only owner), so hopefully an answer for me can assist him also.
The Story: One day, I'm playing Uno HD (downloaded from Android Market). I toss out a Draw 4, and then I see: "Google Infrastructure Failure" and a Triangle with an exclamation mark. I reset the phone, and it starts up fine. Then a few hours later, my phone randomly restarts itself into the bootloader screen after trying to reload the home screen (because the memory manager is overly aggressive).
I see no HTC Screen. It goes straight to the bootloader without any input. If I plug it to the charger from an off state, the amber light comes on, and 10 seconds later, bootloader screen. With a battery, it appears automatically after 45 seconds.
Fastboot can read my memory card just fine. It's already been re-formatted as FAT32 in my pitiful attempt to try to repair it. It's checked and read a PG06IMG file I placed on the SD Card's root, went through the entire process of reading it, but it doesn't ask me if I want to upgrade. It takes me back to the original screen. (Maybe I'm loading the wrong file).
Recovery and Factory Reset immediately restarts the bootloader after showing me the skateboarding android splash screen.
I've also tried to flash the newest stock RUU for it. (2.76.651.4), but after the RUU sends the command to start up in bootloader mode, the phone shuts off. Thus giving me the connection error.
(Maybe if someone could rewrite the .exe file to not send out the command to begin loading as if it was in the bootloader screen, it could work. I'd pay for that.)
Other Stuff:
ROM: Stock Sprint Gingerbread OTA ROM. I've been living the vanilla life. No root access. No funny stuff. Just a stock phone with apps (Third Blade, Uno HD, ASTRO File Manager, ect...)
Directly from bootloader screen:
SPEEDY XA SHIP S-ON
HBOOT-0.98.0001
RADIO-1.08.00.0506
eMMC-boot
April 11 2011, 22:32:34
Is there a way we can flash a file from the SD Card which will turn off the security and/or temp/perm root it? (forgive my noobness for such a question)
EDIT: I'm referring to a way that's outside of the adb push method. My device can't be found, and the device won't get past the bootloader screen, so that method doesn't help me too much. However, I do have the ADK Installed and the ADB Command Line works fine.
Ok .. HERE'S THE SOLUTION:
First off all if your S- ON it means you are NOT rooted
If you get stuck in a bootloop .. don't worry it can be fixed.
What you need to do is download PG06IMG.ZIP and place it on your sd card, you can access your sd card by going into recovery then mount section, then usb. This will allow you to move the file from your computer to the root of your sd card.
Once you do this be sure you back up any info you don't want to lose. Once you have the file in place, go back to fastboot ( hold vol down and power) it will read file and when it asks you to update press vol up. It will take a few minutes to update this will revert your phone back to stock but if you have an old recovery it will not do a full restore, it will only update the rom.
Once you get your phone back to working, I recommend updating your recovery by downloading Rom Manager and flashing the latest clockwork recovery. This problem happens usually due to an old recovery.
One other thing you can try if you do NOT want to reset your phone, you can try flashing a new kernal.
Sent from my PG06100 using Tapatalk
RUU won't work if your stuck in bootloop ..
Sent from my PG06100 using Tapatalk
If you want to root your phone use visionary to temp root then use shift rr .. you can then flash a custom recovery which is essential to avoid this from happening again
flylike2kites said:
I'm trying to resolve a very similar problem as him, but I know of the history of my phone (since I'm the only owner), so hopefully an answer for me can assist him also.
The Story: One day, I'm playing Uno HD (downloaded from Android Market). I toss out a Draw 4, and then I see: "Google Infrastructure Failure" and a Triangle with an exclamation mark. I reset the phone, and it starts up fine. Then a few hours later, my phone randomly restarts itself into the bootloader screen after trying to reload the home screen (because the memory manager is overly aggressive).
I see no HTC Screen. It goes straight to the bootloader without any input. If I plug it to the charger from an off state, the amber light comes on, and 10 seconds later, bootloader screen. With a battery, it appears automatically after 45 seconds.
Fastboot can read my memory card just fine. It's already been re-formatted as FAT32 in my pitiful attempt to try to repair it. It's checked and read a PG06IMG file I placed on the SD Card's root, went through the entire process of reading it, but it doesn't ask me if I want to upgrade. It takes me back to the original screen. (Maybe I'm loading the wrong file).
Recovery and Factory Reset immediately restarts the bootloader after showing me the skateboarding android splash screen.
I've also tried to flash the newest stock RUU for it. (2.76.651.4), but after the RUU sends the command to start up in bootloader mode, the phone shuts off. Thus giving me the connection error.
(Maybe if someone could rewrite the .exe file to not send out the command to begin loading as if it was in the bootloader screen, it could work. I'd pay for that.)
Other Stuff:
ROM: Stock Sprint Gingerbread OTA ROM. I've been living the vanilla life. No root access. No funny stuff. Just a stock phone with apps (Third Blade, Uno HD, ASTRO File Manager, ect...)
Directly from bootloader screen:
SPEEDY XA SHIP S-ON
HBOOT-0.98.0001
RADIO-1.08.00.0506
eMMC-boot
April 11 2011, 22:32:34
Is there a way we can flash a file from the SD Card which will turn off the security and/or temp/perm root it? (forgive my noobness for such a question)
EDIT: I'm referring to a way that's outside of the adb push method. My device can't be found, and the device won't get past the bootloader screen, so that method doesn't help me too much. However, I do have the ADK Installed and the ADB Command Line works fine.
Click to expand...
Click to collapse
Sent from my PG06100 using Tapatalk
Also if your phone can't be found its b/c you need to put it into diag mode .. ##DATA .. if you need more help google
tech-9 said:
If you want to root your phone use visionary to temp root then use shift rr .. you can then flash a custom recovery which is essential to avoid this from happening again
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
Sent from my PG06100 using Tapatalk
For the thread starter, the person that sold you the phone probably tried writing to the system partition with s-on. Since you can get to the bootloader, see if you can get into recovery. If you can, recovery can be seen in adb, even the stock recovery. From there, gingerbread root, plenty of guides out there, make sure you flash the misc.img, download the froyo downgrade zip (that pgimg09.zip or something like that, just search for it, but not with the numbers I just gave, those are made up.)
From there either flash the gingerbread zip or ruu, and goon with a unrooted life. Or follow one of the many guides to froyo root, and live the life of the rooted. Your choice.
For the second person with a similar issue, the same method will work for you (assuming you can get to recovery), gingerroot, froyo downgrade, and since you like being unrooted, just ruu or zip back to gingerbread.
Solution found enjoy, and just think, if root hadn't been discovered for gingerbread, you would be screwed right now, make sure to thank otaking.
I have the same boot loop problem. I tried using the PG06IMG.zip file and fastboot/bootloader screen says I have the wrong image. It's most likely because it's for 2.2 and I have 2.3. I also don't have any recovery. Is there a PG06IMG.zip for 2.3 or the like?
similar problem here
i'm fairly certain i tried recovery with the wrong or corrupt or incomplete PG06IMG.zip on my first attempt. i got the right one from here http://forum.xda-developers.com/showthread.php?t=1255474
i ran it, says update installed, but when i reboot i still get the loop
from bootloader
SPEEDY XE SHIP S-ON
HBOOT-0.93.0001
RADIO-1.07.00.1129
eMMC-boot
Nov 15 2010, 13:19:54
zdavidzz said:
i'm fairly certain i tried recovery with the wrong or corrupt or incomplete PG06IMG.zip on my first attempt. i got the right one from here http://forum.xda-developers.com/showthread.php?t=1255474
i ran it, says update installed, but when i reboot i still get the loop
from bootloader
SPEEDY XE SHIP S-ON
HBOOT-0.93.0001
RADIO-1.07.00.1129
eMMC-boot
Nov 15 2010, 13:19:54
Click to expand...
Click to collapse
Try downloading the zip again and re run it. Possibly a bad download?
Sent from my PG06100 using Tapatalk
also adb is telling me device not found. i think i might have to factory reset. is that crazy?
---------- Post added at 01:31 PM ---------- Previous post was at 01:27 PM ----------
and... that didn't help
i'm downloading the zip again right now.
since i have s-on, will i be able to install it though?
i can get the file on the root of the sdcard with an adapter since i can't push from adb. and i can't temp root the phone because if i try a normal reboot i get this stupid boot loop. is there a way to get s-off through hboot on the phone?
i don't know why i didn't notice that first file was messed up, it was only 6MB.
hi,
Ive recently rooted my phone with no problems using the ace hack kit. i tried flashing the newest andriod revolution hd rom and was having problems with the superuser app force closing and the phone wasnt giving me root privledges. i decided to try and reroot the phone using the ace hack kit. (i realize this was my mistake). it stopped in the middle of the process. so i had to pull the battery. when i tried turning the phone back on the screen was black for about 6 or 7 mins. no vibrations or leds to indicate the phone was on. then the htc white screen comes on and the phone vibrates for 2 or 3 minutes straight and proceeds to come on. Ive tried to flash other roms using cwm recovery and itll load what ever rom i choose but i cant get into the hboot or anything and it does the the black screen everytime along with the vibration. is there anyway to fix this? ive tried over and over to boot into recovery through usb but it doesnt work.
so ive done a little research, could this be a eMMC problem? if so is it fixable... And if not would replacing the hboot help?
You've got a bad or corrupt hboot. The wrong hboot (ENG hboot included in a short-lived version of the hack kit on the newest run of Inspires) or a corrupt hboot from an interrupted hack kit run.
Thanks for the help. I tried replacing the eng hboot with the link provided on freenode and it work.
After a failed attempt at running the ace hack kit (could only get into hboot), and an ever worse failed attempt at restoring to a stock rom (my stupid mistake), I am seeing the same signature as jbryancs.
Would you share the link and instructions for replacing the hboot? Any assistance is much appreciated.
wleven said:
After a failed attempt at running the ace hack kit (could only get into hboot), and an ever worse failed attempt at restoring to a stock rom (my stupid mistake), I am seeing the same signature as jbryancs.
Would you share the link and instructions for replacing the hboot? Any assistance is much appreciated.
Click to expand...
Click to collapse
really? so jumping into the IRC channel is not your best move as instructed to the OP?
I was hoping not to disturb the IRC, but I will jump in tomorrow. Just for background, here's a rough list of what I've done and what I'm seeing now.
Setup: Linux Mint 11 (Ubuntu Derivative) Clean Install for ACE Hack Kit, WinXP for the rest.
1. Ran ACE Hack Kit first time -> stalled early in process
2. Rebooted phone and everything appeared normal
3. Rac ACE Hack Kit second time -> completed process, but noticed some errors/warnings along the way
4. Rebooted phone and it would be stuck at the white HTC logo screen
5. Rebooted to hboot, but none of the options there would restore the phone.
6. Downloaded original ACE firmware and copied ZIP to SD card. It recognized this and performed install, in all appearances successfully until the reboot.
7. On reboot, the phone appeared completely dead. Later discovered that it would spring to life after ~7mins, vibrate 2-3 min, and then boot into Froyo
Phase II
1. Downloaded gingerbread RUU from HTC and ran it. Gets stuck on "Waiting for bootloader"
2. Thought perhaps hboot was corrupted, so ran instructions here "wiki.cyanogenmod.com/wiki/HTC_Ace:_Rooting_%26_CyanogenMod" to install hboot-eng and clockworkmod
3. This did not fix the booting (still wait 7mins, vibrate 2-3), but I do have root now, as verified through su root on the phone's terminal console.
4. Tried the RUU again, stuck on "Waiting for bootloader"
5. Noticed that if I had the phone USB connected to the PC when power cycling, it would come to a black HTC screen after about 7mins. In this mode, the phone seems to connect in Android bootloader interface.
6. Tried the RUU again, and this time it makes it past "Waiting for bootloader", but hangs (no error message) on "Sending". I've left it for nearly an hour with no change -- just keeps showing the black HTC screen.
I still can't get the phone into HBOOT (using the volume down + power method).
Hello,
Could someone tell me if there's an enclosure or a solution to this problem?
I've searched a few forums, and it appear to me that the conclusion is the old (ENG) HBOOT is incompatible with newer hardware.
Thanks.
hchao said:
Hello,
Could someone tell me if there's an enclosure or a solution to this problem?
I've searched a few forums, and it appear to me that the conclusion is the old (ENG) HBOOT is incompatible with newer hardware.
Thanks.
Click to expand...
Click to collapse
You will have to flash the original RUU again and then try to root the cell with the Hack Kit. You can find the original RUU in the general section or go to the htc site and just run the .exe update from fastboot. Let your cell reboot (it will take about 30 minutes) and then flash it.
jbryancs said:
hi,
Ive recently rooted my phone with no problems using the ace hack kit. i tried flashing the newest andriod revolution hd rom and was having problems with the superuser app force closing and the phone wasnt giving me root privledges. i decided to try and reroot the phone using the ace hack kit. (i realize this was my mistake). it stopped in the middle of the process. so i had to pull the battery. when i tried turning the phone back on the screen was black for about 6 or 7 mins. no vibrations or leds to indicate the phone was on. then the htc white screen comes on and the phone vibrates for 2 or 3 minutes straight and proceeds to come on. Ive tried to flash other roms using cwm recovery and itll load what ever rom i choose but i cant get into the hboot or anything and it does the the black screen everytime along with the vibration. is there anyway to fix this? ive tried over and over to boot into recovery through usb but it doesnt work.
so ive done a little research, could this be a eMMC problem? if so is it fixable... And if not would replacing the hboot help?
Click to expand...
Click to collapse
I am having this same problem I have searched and searched and this post was the only one that had the same issue could someone please help me out on this and post the fix. Thanks
Ok guys, new to the forums but this problem has had me fully occupied for the last 6 hours and I feel like I have tried everything. I had cm9 alpha 12, and went to flash TrickDroid v5.0, something happened and I'm currently stuck in some wierd bootloop/soft brick. I had access to CWM but my SD card wouldn't mount and my adb push attempts didn't do anything, for reasons I don't know why. My phone would start up into the wierd trickdroid bootup and last for like 30 minutes. I tried the solution of another thread on how to fix a bootloop/ softbrick, but now I dont have any CWM access and I can only access the bootloader or the endless bootup screen. I tried using the all in one tool to flash the CWM again but it just restarts it and puts it back into the bootup, and when i restart to go to bootloader to acess the recovery, it goes back to bootup. Every solution I try makes my problem worse, and to top it off I cant turn my phone off and keep it off because it will just start back up. Thanks.
Edit: Problem fixed. Downloaded the original all in 1 tool for htc one s, plugged phone into comp went to fastboot and with the tool flashed the phones stock recovery. I reset to factory defaults and cleared storage with it from the bootloader. After that, I flashed clockwork mod recovery again and my SD card was able to be mounted and accepted files from my adb push, and I reflashed cyanogenmod. Wuzzah!
milesmarrero said:
Ok guys, new to the forums but this problem has had me fully occupied for the last 6 hours and I feel like I have tried everything. I had cm9 alpha 12, and went to flash TrickDroid v5.0, something happened and I'm currently stuck in some wierd bootloop/soft brick. I had access to CWM but my SD card wouldn't mount and my adb push attempts didn't do anything, for reasons I don't know why. My phone would start up into the wierd trickdroid bootup and last for like 30 minutes. I tried the solution of another thread on how to fix a bootloop/ softbrick, but now I dont have any CWM access and I can only access the bootloader or the endless bootup screen. I tried using the all in one tool to flash the CWM again but it just restarts it and puts it back into the bootup, and when i restart to go to bootloader to acess the recovery, it goes back to bootup. Every solution I try makes my problem worse, and to top it off I cant turn my phone off and keep it off because it will just start back up. Thanks.
Click to expand...
Click to collapse
lol, meant to "quote" not "thanks".
Can you fastboot a new recovery?
Did you do a full wipe coming from CM9 to TrickDroid
Well I can't access the phone from usb on my computer (still takes charge though), so I don't think I can flash a recovery thru fastboot (I'm not too experienced though). From cm9, I wiped all and flashed trickdroid + tweak set, then it just stat their at home screen. CMW being lost occurred later.
Im in the same situation rght now. I have trickdroid and I went into my tweaks to set them back to their original setup...so removing all of the options I chose before when I used the tweaks for the first time. When I rebooted my phone it just hangs on the HTC screen. I can get into recovery and I tried reinstalling trickdroid but its still getting stuck. Not sure what to do at this point. I don't think I can put a recovery file on this since I can't connect it to my computer.
Hopefully someone can help us.
But the thing is I can't access recovery. I try to flash it again with the all in 1 tool and it won't work. It says it went through, but accessing it doesn't work.
If its recognised by USB when plugged in computer just run an ruu that's my solution all The time lol
Sent from my HTC One S using xda premium
Ok i somehow managed to get TWR on my phone, but still unable to mount the SD. How do I run the RUU? I downloaded it, but the instructions are flawed I think
Connect with USB to.computer go into faatboot USB then run ruu on pc
Sent from my HTC One S using xda premium
Well I thought the RUU was going to work, but it just stops at the HTC and gives me an error saying I can't. What now?
Ok currently, I relocked my bootloader in an attempt to do the RUU, but I get a 155 Unknown Error up doing such, using the TMOUS 1.53 ruu... other places I have seen say something about returning to the stock img etc, but I'm quite stuck. Any advice appreciated
htc one s stuck in bootloop almost unresponsive
hey guys, got a brain teaser for you.
i have a tmobile htc one s, unlocked, rooted using all in one htc tool, been at it for two days now. im stuck on the boot screen showing its unlocked, i used to be able to get into the boot loader screen but now it seems ive dead ended. ill hold any combination of power and vol up/down, the keys flash for 10 sec and the screen flashes once, i let go and it reboots, keeps that htc screen, after 20-30 sec goes black. my pc doings like it detects a device but i cant locate it. ive used adb and the htc all in one unlock tool trying to get any kind of os to launch.
Shortly before this i was able to go into the boot loader, clear and master reset the files and cache, and search for the rom zip, thus never allowing me to flash. on a journey to place this in the phone through various combinations of the all in one, adb push, and everything else i found on youtube, countless forum posts, i seem to be in a deeper hole now.
I ultimately want to end with a cm10 nightly on my tmo htc one s. I have never done this to a phone without a sd card. i come to this community humbly seeking any and all advice. thank you.
Hi,
I have my HTC Desire S for about 6 month and it worked fine. About three weeks ago I installed the official ICS upgrade for this phone. The phone was rooted (by me) so I re-locked it in order to apply the update (sorry if I'm not using the right terms, I a bit new for this..).
A week ago, while in visiting in Rome, I tried to open my phone after the flight and it started a reboot loop. After a while it somehow recovered, and from the HTC recovery log I saw there was some "radio failure".
During the last week it would reboot from time to time, and I thought I would check it out when coming back home.
Now, trying to open it after the flight home - it won't even get beyond the HTC logo, just stuck in endless reboot loop.
I read some posts on this problem, but because my phone is re-locked I don't know what I can do: any thread about this problem requires the phone to be rooted. And I'm not sure how to root it because any thread about performing a root requires to open the phone and set up some settings, like 'enable debugging' for the USB connection (which I cannot do because phone keeps rebooting..).
Here is what I see at the HBOOT screen, hope it helps:
*** RELOCKED ***
SAGA PVT SHIP S-ON RL
HBOOT-2.02.0002
RADIO-3831. 19.00.110
eMMC-boot
Jul 31 2012, 15:41:32
Trying to select FACTORY RESET will not help.
Trying to select RECOVERY ends with an error (I get a screen with a nice picture of the phone and red exclamation mark near it).
PLZ HELP!!
Thanks
Update: I've unlocked my phone again using the HTC site, so now the HBOOT screen shows *** UNLOCKED *** as the first line, other lines are the same (if this helps...)
UPDATE: I've used some very good guide (unfortunately I cannot post the link because I'm a new user..) for rooting and flashing a new ROM to my phone (downgraded to Gingerbread ROM), BUT the phone keeps rebooting..
Help plz....
As it did work until you opened the phone, either you made a physical problem, and now need a new board because it is defective, torn, cracked or something...
Or you made a mistake by removing the battery while the phone was still (partially) powered. This may cause some partition damage like on a pc. As there is no chkdsk available, the easiest solution is to repartition and reformat.
I read you already have reformatted the data partition by factory reset, and tried to repartition by installing that old update.
That would not work, as a normal flashing of a (custom or original) rom will / can not repartition the emmc chip. The only way to do that is to execute the RUU again what made phone get the ICS Update.
If that doesn't solve your problem, your phone seems to be defective.
The last option that remains then is to replace the emmc chip.
Verstuurd van mijn Nexus 7 met Tapatalk
Thanks for the reply.
Can you explain how should I reformat and repartition? I have now the ClockworkMod Recovery (V5.8.1.5)
I cannot run RUU because the exe file tries to connect to the phone and gets an connection error. It only worked when the phone completed its upload and now (because of the reboot-loop) I can't get to this state.
Ok, It took me some time to understand that when in fastboot the PC has communication with the phone and I can install RUU..
So I re-install the HTC official ICS RUU for my device and it seems PROBLEM SOLVED!
Phone has started, I could play with it a bit... and no reboots yet.
Let's see if it keeps like that for several hours / days... I hope it is not an hardware problem and only software...
Thanks!
Hi everyone, i got an issue with my cel phone, i update it with the RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34 and after that my phone starts in a boot loop , the AT&T logo appears but then restarts again ,and again ,etc.-
I tried to conect it to the Pc so i can put another RUU Rom ,but computer cant install the drivers so is not recognize .-
The phone is not unlock
Please i dont know what to do , i tried a lot of thing like fastboot rebot,recovery,etc but nothing seems to work , if anyone can help me i will be gratefull
thanks
try a factory reset from recovery hold the power button and volume down till the lights at the bottom start blinking when the phone shuts off keep holding the volume button and let go of the power button this should get you into bootloader then select recovery from there
So the phone is stock (not rooted, never bootloader unlocked)?
If the drivers aren't correctly installed, the RUU is never going to run. I think that is the main problem. Find the latest drivers (HTC Sync), reboot the computer, make sure you have admin rights, etc. Also try a different USB port, or try another computer, if possible.
redpoint73 said:
So the phone is stock (not rooted, never bootloader unlocked)?
If the drivers aren't correctly installed, the RUU is never going to run. I think that is the main problem. Find the latest drivers (HTC Sync), reboot the computer, make sure you have admin rights, etc. Also try a different USB port, or try another computer, if possible.
Click to expand...
Click to collapse
Yes you are right , te phone is stock , also y tried reseting the recovery and nothing happend, the problem is what you said i think , i will try with the laptop and tell you what happend
gomussi said:
also y tried reseting the recovery and nothing happend
Click to expand...
Click to collapse
RUU doesn't care about recovery, it re-installs stock recovery automatically.
Well i made what you told me , first i tried to put the same RUU and it flashed it but issue remains , so i tried to put an older RUU ( downgrade it ) process starts but suddenly stopt with 140 error : bootloader version error .-
I don´t know wich version i can istall if process show me that error .-Or which RUU version can put on it
my cel phone
EVITA PVT SHIP´S-ON RL
HBOOT-2.14.0000
RADIO-0.24p.32.09.06
oPEN dsp-V34.1.0.45.1219
Emmc-boot
You can't use a previous RUU if the hboot is older. So that error is normal and expected.
You will need to run the 3.18 RUU. Try to download it again. Might just be a bad download.
redpoint73 said:
You can't use a previous RUU if the hboot is older. So that error is normal and expected.
You will need to run the 3.18 RUU. Try to download it again. Might just be a bad download.
Click to expand...
Click to collapse
i already download from htc site and the same happend
Well i finally solve the problem ,after updating with the same RUU many times ,what i do ( don´t know how it works) i flash recovery, when the screen show the red triangle with the exclamation sign , i push power button for about 10 sec ,and the cel phone restarts ok.-
Now i want to know what can ido with this RUU,im afraid if i restar the cel againg the same thing is going to happend .-
I tried to rooted but no succes
I got a doubt what should i do first ?? unlock bootloder or root the phone first ??
thanks
First thing you need to do is read the stickies in this q&a section. Then read stickies in android development section. Then if you have questions, ask. If you just ran the 3.18 ruu though, you're sol, no root/bootloader unlocking possible.
Sent from my HTC One X using xda app-developers app
gomussi said:
I got a doubt what should i do first ?? unlock bootloder or root the phone first ??
Click to expand...
Click to collapse
Its not clear from your posts whether the phone was actually updated to 3.18 firmware or not. But the hboot has at least been updated to 2.14.
If the phone is on 3.18 firmware, you can't unlock the bootloader and you can't root.
Well thanks for all the answers , but sorry to say, i continue with the loops anda suddenly the phone starst fine, but when in rebbot it for some reason keep on with the loop issue.-
Instead of that i notice a strange thing happend , as i told , got wifi problems on this model , but as shown in the picture above , i pull out the micro sim,so no mobile data, data conection or network operator set and im connect to my wifi network , thats is strange ,if i put the sim ,the cel phone automatically set the network operator ,and if i set the APN , wifi signal desapears and beggin the known issue for this model on wifi signal and connections .-
Any idea of wath can be ??
Thanks
if you can get your phone to boot and stay booted for atleast 30 minutes. could you install and run this app. eMMC Brickbug Check it will check if the phones memory is good. i havent heard of any bad emmc on evita but maybe you have one, since you seem to be having a similar problem to what i had on an htc ace. also you could reboot into stock recovery and do a factory reset or clear cache, see if you get any errors i got emmc errors on my ace before the partitions finally decided to crap out. you could go through the unbrick thread to repair partitions before the die completely, my theory was doing a similar thing to this ace to repair it.
big problem
I just unlocked my bootloader and rooted my phone, everything went fine. i then tried to flash a custom ROM. Thats where it went really bad. It went into a bootloop. I was able to get it back to bootloader mode and then recovery, so i tried to flash the ROM again, same result. I now have no way to transfer a new ROM over to my SD card and attempts to flash this ROM i downloaded through fastboot have all failed. I dont know what to do at this point, please help.
You haven't given enough information. What are your bootloader details? What recovery and version are you using? Which ROM did you flash? Did you do a factory reset from bootloader?
Sent from my Evita
brickwallwb17 said:
I just unlocked my bootloader and rooted my phone, everything went fine. i then tried to flash a custom ROM. Thats where it went really bad. It went into a bootloop. I was able to get it back to bootloader mode and then recovery, so i tried to flash the ROM again, same result. I now have no way to transfer a new ROM over to my SD card and attempts to flash this ROM i downloaded through fastboot have all failed. I dont know what to do at this point, please help.
Click to expand...
Click to collapse
If s-on, do you realize that you need to flash boot.img seperately using fastboot (for any hboot 1.14 or higher)? This is the most common reason for bootloops when flashing a ROM on this device.