Hi All,
I hope someone can help me out here. I've been searching on Google and on the forums here but so far no luck.
I've got a friend with a Samsung Nexus S (GT_i9020 on o2 network). His screen is not working anymore. I have found LCD+Digitizers on Ebay to replace his screen. But nowhere I can find a guide to replace it.
Does someone know where I can find a guide to replace the LCD screen?
Thanks in advance!
Will this help?
http://www.repairsuniverse.com/samsung-google-nexus-s-take-apart-repair-guide.html
Click to expand...
Click to collapse
Related
Hi I have an HTC Sensation 4G and did a screen replacement and now I am getting no response at all from the digitizer. Please help. I saw somewhere it was mentioned that it could be a software fix.
Thank You I am desperate
hemanhall said:
Hi I have an HTC Sensation 4G and did a screen replacement and now I am getting no response at all from the digitizer. Please help. I saw somewhere it was mentioned that it could be a software fix.
Thank You I am desperate
Click to expand...
Click to collapse
Hi,
Are you looking for THIS THREAD ?
Just wondering if Google now can be added to the stock ICS rom on the Galaxy Tablet 2. Of course the tablet is rooted, but just wondering which package if any I should use.
Thanks
On cm9 there was a way to put it on cm9, otherwise unless if you go to jellybean im pretty sure there is no other way sorry.
Sent from my Infuse 4g
Ryanscool said:
On cm9 there was a way to put it on cm9, otherwise unless if you go to jellybean im pretty sure there is no other way sorry.
Sent from my Infuse 4g
Click to expand...
Click to collapse
Cheers mate thanks for that
here's a method
http://forum.xda-developers.com/showpost.php?p=29756226&postcount=2856
Hallo, i know this thread will be not the right one to post this, but couldnt find the right one anyway. I saw it was about the Medion P5001 smartphone and im looking for a new screen, mine is broken, does someone know where and how to get a screen that i can try to fix it myself?
tkx
StraffeHendrick said:
Hallo, i know this thread will be not the right one to post this, but couldnt find the right one anyway. I saw it was about the Medion P5001 smartphone and im looking for a new screen, mine is broken, does someone know where and how to get a screen that i can try to fix it myself?
tkx
Click to expand...
Click to collapse
I know this thread is old but I ran into the same problem - after some researching I discovered that the p5001 is actually a "cloned" Coolpad 7295C, if you pop the back cover open and look at the lower left corner you should see faint coolpad model number "7295C" - search aliexpress, ebay or something similar and you'll find lots of cheap parts. good luck !
ibmchas said:
I know this thread is old but I ran into the same problem - after some researching I discovered that the p5001 is actually a "cloned" Coolpad 7295C, if you pop the back cover open and look at the lower left corner you should see faint coolpad model number "7295C" - search aliexpress, ebay or something similar and you'll find lots of cheap parts. good luck !
Click to expand...
Click to collapse
Actually it was for someone else, but that guy isnt answering me anymore, so tkx for the info but its not needed anymore.
Hello all,
I was asked to replace a digitizer for a friend, the phone is a gt-s7500, don't know if its rooted, probably not.
Didnt have any problems replacing it, but as a result i got a miss calibration between the are touched and the actual area clicked.
What can i do in this situation? the miss calibration is so big i have to touch the right side of the screen to click on the far left icons.
Any advice please?
cosscoss said:
Hello all,
I was asked to replace a digitizer for a friend, the phone is a gt-s7500, don't know if its rooted, probably not.
Didnt have any problems replacing it, but as a result i got a miss calibration between the are touched and the actual area clicked.
What can i do in this situation? the miss calibration is so big i have to touch the right side of the screen to click on the far left icons.
Any advice please?
Click to expand...
Click to collapse
Hi!
I'm having the same problem. Any ideas?
Thanks!!
News
cosscoss said:
Hello all,
I was asked to replace a digitizer for a friend, the phone is a gt-s7500, don't know if its rooted, probably not.
Didnt have any problems replacing it, but as a result i got a miss calibration between the are touched and the actual area clicked.
What can i do in this situation? the miss calibration is so big i have to touch the right side of the screen to click on the far left icons.
Any advice please?
Click to expand...
Click to collapse
Hi cosscoss.
Did you solve this issue?, I have the same situation.
Thanks, regards.
cosscoss said:
Hello all,
I was asked to replace a digitizer for a friend, the phone is a gt-s7500, don't know if its rooted, probably not.
Didnt have any problems replacing it, but as a result i got a miss calibration between the are touched and the actual area clicked.
What can i do in this situation? the miss calibration is so big i have to touch the right side of the screen to click on the far left icons.
Any advice please?
Click to expand...
Click to collapse
Did you tryed a factory reset?maybe flashing another rom help?
Hello,
I've recently bought Galaxy S4 clone and it was working great, till I tried rooting it.
The rooting was through *android kingo root* and everything went flawless. After 15 minutes, I noticed that the screen is black but there's backlight led. I thought it might be out of charge or any silly reason, tried every possible solution but couldn't get any help.
The phone turns on and I can receive calls and reply by guessing the place, I also can hear the unlock/lock sounds. But no luck in turning screen on.
Any help guys ?
this is urgent
Bump.
Sorry but the case is realy urgent. Please enlighten me with any help. /:
This is really important guys /:
Hope anyone can give me a hint ..
Clone
Don't know about a clone but i can think of just two things,
First maybe it's a hardware problem and need to be repaired!
Second if it is caused due to rooting or anything then you can try flashing the official firmware of your device (if available).
_maninder_ said:
Don't know about a clone but i can think of just two things,
First maybe it's a hardware problem and need to be repaired!
Second if it is caused due to rooting or anything then you can try flashing the official firmware of your device (if available).
Click to expand...
Click to collapse
Well I think its a hardware problem, because the phone starts up and I can hear sounds.
I could get a screenshot from the phone and see the karnel/baseband ... etc (Attachments)
I don't know where I could find a replacement screen or a rom flashed. Could you assist me with some hints or links?
Thanks.
Omar_ said:
Well I think its a hardware problem, because the phone starts up and I can hear sounds.
I could get a screenshot from the phone and see the karnel/baseband ... etc (Attachments)
I don't know where I could find a replacement screen or a rom flashed. Could you assist me with some hints or links?
Thanks.
Click to expand...
Click to collapse
A screen you should be able to order from china. A rom, now that will be harder to find as clone have almost no support or developers.
zelendel said:
A screen you should be able to order from china. A rom, now that will be harder to find as clone have almost no support or developers.
Click to expand...
Click to collapse
I believe its a hardware one's. The touch works fine
Could you give me a link? I couldn't find any screen.
Omar_ said:
I believe its a hardware one's. The touch works fine
Could you give me a link? I couldn't find any screen.
Click to expand...
Click to collapse
Well see thats the issue with clones. No telling what part they used from where.
This is all I could find.
http://forum.xda-developers.com/showthread.php?t=2512243
To be honest it maybe cheaper to replace the device with an authentic version from somewhere like swappa or something.
zelendel said:
Well see thats the issue with clones. No telling what part they used from where.
This is all I could find.
http://forum.xda-developers.com/showthread.php?t=2512243
To be honest it maybe cheaper to replace the device with an authentic version from somewhere like swappa or something.
Click to expand...
Click to collapse
Well, at the moment I have no money at all. I spent it all on the phone and didn't complete 2 weeks. I will try to save some money in the next months to buy another phone or parts.
If anyone has another solution please tell me.
hello guys,
first i want to apologize for my bad english...
i have the following problem.
i have a Medion Lifetab E7316. it had a broken lcd, so i bought a new one.
I have installed the new and it also works... but now i had a wrong display resolution and position.
if you look at the pictures you see what i mean.
is there any way to fix that problem???
i hope anyone here can help me!
with best regards
Anyone a idea?!
Sent from my LG-P930 using XDA Free mobile app
michLQ said:
hello guys,
first i want to apologize for my bad english...
i have the following problem.
i have a Medion Lifetab E7316. it had a broken lcd, so i bought a new one.
I have installed the new and it also works... but now i had a wrong display resolution and position.
if you look at the pictures you see what i mean.
is there any way to fix that problem???
i hope anyone here can help me!
with best regards
Click to expand...
Click to collapse
I just stumbled on your topic by accident and perhaps I have an idea if you have not found anything yet.
I presume your new display has a different Screen Density (DPI) than the original one and therefor the scaling is off.
There are a couple of options to change it like apps on the playstore or using custom roms with built-in functions or editing the actual build.prop file yourself. Since its a system edit you usually would need to be rooted to be able to do it. Do a search for "changing dpi on android" here or google, you'll find many articles.