*WARNING! I Am Not Responsible For Anything That Happens To Your Device*
PLEASE READ ENTIRE OP CAREFULLY, THANKS! and remember: when reporting issues, please provide more info than "my phone rebooted, anyone know why?"
Based on HTC Pyramid source code. Found [HERE]My github: [HERE]
BIG THANKS TO:
Cayniarb For his fantastic coding work and help with any of my questions
Faux123, Erasmux, Scaryghoul, Nick Piggin, LeeDroid, Umaro, mdeejay, imoseyon, LorDClockaN for the reference or code I may have used
Raycaster3 for being my crash test dummie
Anyone I didnt mention.. it's not intentional, please let me know!
Included:
COMPATIBLE WITH ALL 2.3.3 GINGERBREAD SENSE ROMS
Patched to 2.6.35.14
CPU OverClocked up to 1.89GHz [cayniarb] (Higher Frequencies may be unsatble for some devices)
OnDemand Governor default Gov set @ 222/1188MHz
Under Volt
NOOP I/O scheduler default
SLQB Memory Management
Built in WiFi Calling support
Available CPU Governors:
conservative, performance, ondemand, interactive, powersave, userspace
Optional I/O Schedulers:
anticipatory, deadline, cfq, bfq, sio, vr
Instructions on flashing Kernel:
1. Download and place on your SD card
2. Boot into Recovery Mode
3. Do a NAND BACKUP!!!
4. Wipe Dalvik & Cache
5. Flash Kernel
6. After flashing is complete, Reboot..
7.Wait a few minutes for Os to load and reboot again
8.If using SetCPU, make sure you reselect "autodetect speeds recommended"
9.Done!
10. Welcome to the DARKSIDE!
My Change Log:
Code:
[U][B]2.6.35.14::demonspeed v0.1:: BETA (8.14.2011)[/B][/U]
-Initial release
*WARNING!* PLEASE READ INSTRUCTIONS CAREFULLY! IF YOU DO NOT UNDERSTAND WHAT YOU ARE READING, PLEASE ASK ANY QUESTIONS BEFORE FLASHING!
[DOWNLOAD HERE] 2.6.35.14 ::demonspeed v0.1:: BETA (8.14.2011)
md5: b7ec859c01c6f55735b53df303bd1490
Future.......
Great to see you here!
I'm so glad to see you here on sensation! Thanks for your hard work!
Darkside has arrived to the sensation!
i'm gonna test it thanks
its for 234 ?
Wiped cache, flashed kernel.. Stuck in bootloop. Stays on white screen, goes black, then back to white.
phantomevo77 said:
Wiped cache, flashed kernel.. Stuck in bootloop. Stays on white screen, goes black, then back to white.
Click to expand...
Click to collapse
Hmmm strange? What rom are you running?
Sent from my MIUI ||demonspeed_MOD|| HTC Glacier using Forum Runner
vladnosferatu said:
i'm gonna test it thanks
its for 234 ?
Click to expand...
Click to collapse
That much I am not sure of to be honest, only been tested on 2.3.3... from what i am thinking but please correct me if im wrong, 2.6.35.14 is compatible with 2.3.4??
Sent from my MIUI ||demonspeed_MOD|| HTC Glacier using Forum Runner
thederekjay said:
That much I am not sure of to be honest, only been tested on 2.3.3... from what i am thinking but please correct me if im wrong, 2.6.35.14 is compatible with 2.3.4??
Sent from my MIUI ||demonspeed_MOD|| HTC Glacier using Forum Runner
Click to expand...
Click to collapse
I'm running it on 2.3.4 right now, all seems to be well so far. I'll let you know of any bugs if I run into any.
motoman234 said:
I'm running it on 2.3.4 right now, all seems to be well so far. I'll let you know of any bugs if I run into any.
Click to expand...
Click to collapse
Thanks man! this is a blind build ( i dont have my sensi yet) but has been thoroughly tested... As reported all has been running well... so the more feedback i can get the better
Can I use oc daemon with this kernel
Sent from my duo core monster.
ridikolous said:
Can I use oc daemon with this kernel
Sent from my duo core monster.
Click to expand...
Click to collapse
i dont see why not??? unless there is something I'm unaware of?
Nice to see you here man! I just loaded your MIUI rom and kernel on my bro's MT4G. I forgot how much of a beast that phone was. When is your Sensation coming in? Oh...thanks for the kernel. Ill test it on 2.3.4, I heard these aren't compatible yet.
Oc daemon tool is working
Sent from my duo core monster.
Lakeshow423 said:
Nice to see you here man! I just loaded your MIUI rom and kernel on my bro's MT4G. I forgot how much of a beast that phone was. When is your Sensation coming in? Oh...thanks for the kernel. Ill test it on 2.3.4, I heard these aren't compatible yet.
Click to expand...
Click to collapse
hopefully end of next week for device.. all i know is that... works on 2.3.3.. my only concern on 2.3.4 is the camera functioning properly.. pls let me know>?
ridikolous said:
Oc daemon tool is working
Sent from my duo core monster.
Click to expand...
Click to collapse
sweet deal my dude! thanks for the report!
ridikolous said:
Oc daemon tool is working
Sent from my duo core monster.
Click to expand...
Click to collapse
can you make a cf-bench with this kernel ?
vladnosferatu said:
can you make a cf-bench with this kernel ?
Click to expand...
Click to collapse
who? i cant but i can get you one if you want it...
ridikolous said:
Oc daemon tool is working
Sent from my duo core monster.
Click to expand...
Click to collapse
Any way you could post that apk? I forgot to back it up when I had a rom that came with it. Thanks in advance!
Sent from my HTC Pyramid
vladnosferatu said:
can you make a cf-bench with this kernel ?
Click to expand...
Click to collapse
I don't use benchmark, sorry.
Sent from my duo core monster.
raycaster3 said:
Any way you could post that apk? I forgot to back it up when I had a rom that came with it. Thanks in advance!
Sent from my HTC Pyramid
Click to expand...
Click to collapse
I got it from revolutionhd thread. In the kernel section.
Sent from my duo core monster.
Related
AOSP Kernels for HTC's 8x50, 7x30, and 8x60 Devices
Also available for the Motorola Xoom
Tiamat kernels are designed for use on all ROMs that are built from the AOSP source code. This includes ROMs built from MIUI, CyanogenMod, and others.
Tiamat receives no support for use with ROMs based on HTC's Sense - use at your own risk.
Click to expand...
Click to collapse
Tiamat Kernels
You can find full details about Tiamat Kernels at our website. The site is up and running and serves as a more centralized location to get updates, downloads, and changelogs for all Tiamat Kernels. There is no forum or Registration, it’s just a more convenient way to keep things organized as we work to add support for more devices.
Click to expand...
Click to collapse
Support
Join the Tiamat Kernel developers on IRC at irc.freenode.net, #tiamat. Support and questions are generally handled faster there than the forums. You can easily join via webchat here.
Click to expand...
Click to collapse
Special Thanks to:
toastcfh, slayher and the CyanogenMod team for the base kernels and everything else they do for the Android community
bcnice20 for generally being awesome
TeamWin for also generally being awesome
netarchy, chad0989, cuviper, and invisiblek for some great code
intersectRaven and redstar3894 for the Mjolnir compiler
JasonK75 for updating threads
Click to expand...
Click to collapse
Quick Links
Click to expand...
Click to collapse
8x50 Changelog
8x60 Changelog
7x30 Changelog
Downloads
FAQ
Source Code
reserved for later
This kernel has been around for the Inc and the Evo. Now I'm bringing it to the N1 and the Desire!!
Great, Heard about this kernel a lot. I'll try it today on MIUI
Wow, so far very fast on Cm7. Will post some details later, but initially, very promising.
Never heard of this kernel before, gonna give it a try someday.
Hey Cayniarb
Could you tell me - a noob, what are the differences between your kernel (for desire) and the EViolets one and the Richard Trips one in GingerVillain?
Thought I'd give your kernel a try - so far so good.
I did notice though it doesn't have an ONDEMAND govenor - defaults to SMARTASS. Performance seems OK though, time will tell regarding stability etc.
Thanks for sharing.
Thanks for this Cayniarb
Can you tell me which governors are available on this kernel or is it only smartass? What are the minimum and maximum frequencies?
Cheers
Might try this one for my desire. Will report back when i have an idea how this one works out
Gfx glitches appears in robo's gingerbread sense ROM.
Sent from my HTC Desire using XDA Premium App
jeffreyljb said:
Gfx in gingerbread sense ROM.
Sent from my HTC Desire using XDA Premium App
Click to expand...
Click to collapse
U mean gfx glitches?
Yes,but does not appears so often .
k3lcior said:
U mean gfx glitches?
Click to expand...
Click to collapse
Sent from my HTC Desire using XDA Premium App
Gonna give it a shot on my Desire with MIUI 1.4.8 !
jeffreyljb said:
Yes,but does not appears so often .
Sent from my HTC Desire using XDA Premium App
Click to expand...
Click to collapse
Its not for sense Roms as far as i'm aware.
Looks smooth and good, but camera does not work on Oxygen.
jeffreyljb said:
Gfx glitches appears in robo's gingerbread sense ROM.
Sent from my HTC Desire using XDA Premium App
Click to expand...
Click to collapse
This is for AOSP ROMs, so I would expect some problems on Sense.
brandall said:
Thanks for this Cayniarb
Can you tell me which governors are available on this kernel or is it only smartass? What are the minimum and maximum frequencies?
Cheers
Click to expand...
Click to collapse
The kernel has interactive, conservative, performance, userspace, and smartass. On demand has been removed to force the default to smartass. With smartass, you will get a default screen-off max of 384Mhz. Available speeds are 128Mhz to 1.26Ghz (not all phones can clock that high!!).
cez10 said:
Hey Cayniarb
Could you tell me - a noob, what are the differences between your kernel (for desire) and the EViolets one and the Richard Trips one in GingerVillain?
Click to expand...
Click to collapse
I don't know enough about the desire community to answer you... I don't actually have a desire - the kernel started on Inc and Evo (both of which I do have) and some n1 and desire users had been asking me to bring it over to their phones, so I finally got around to it and posted them up for everyone.
Cayniarb said:
The kernel has interactive, conservative, performance, userspace, and smartass. On demand has been removed to force the default to smartass. With smartass, you will get a default screen-off max of 384Mhz. Available speeds are 128Mhz to 1.26Ghz (not all phones can clock that high!!).
Click to expand...
Click to collapse
Excellent - thanks for your work on this, I'll give it a try later.
For those interested in how to use the smartass governor, I found reading this useful
http://www.thinkwiki.org/wiki/How_to_make_use_of_Dynamic_Frequency_Scaling
AOSP Kernels for HTC's 8x50, 7x30, and 8x60 Devices
Also available for the Motorola Xoom
Tiamat kernels are designed for use on all ROMs that are built from the AOSP source code. This includes ROMs built from MIUI, CyanogenMod, and others.
Tiamat receives no support for use with ROMs based on HTC's Sense - use at your own risk.
Click to expand...
Click to collapse
Tiamat Kernels
You can find full details about Tiamat Kernels at our website. The site is up and running and serves as a more centralized location to get updates, downloads, and changelogs for all Tiamat Kernels. There is no forum or Registration, it’s just a more convenient way to keep things organized as we work to add support for more devices.
Click to expand...
Click to collapse
Support
Join the Tiamat Kernel developers on IRC at irc.freenode.net, #tiamat. Support and questions are generally handled faster there than the forums. You can easily join via webchat here.
Click to expand...
Click to collapse
Special Thanks to:
toastcfh, slayher and the CyanogenMod team for the base kernels and everything else they do for the Android community
bcnice20 for generally being awesome
TeamWin for also generally being awesome
netarchy, chad0989, cuviper, and invisiblek for some great code
intersectRaven and redstar3894 for the Mjolnir compiler
JasonK75 for updating threads
Click to expand...
Click to collapse
Quick Links
Click to expand...
Click to collapse
8x50 Changelog
8x60 Changelog
7x30 Changelog
Downloads
FAQ
Source Code
Awesome to see u guys on sensation your all over my xoom!!
Sent from my Xoom using Tapatalk
The only issues i had now is that i flash this kernel and i wasnt able to unlock my phone. think i might wanna reflash it again .
Edit:Still the same problem. I hope i'm not the only one here.
Welcome guys. I'll be testing this kernel as well im glad your deving for our device.
Sent from my HTC Sensation 4G using Tapatalk
Hm interessting, really want to try but, can you tell us more ?
Is this kernel made for performance and it's OC ?
Or is it not OC by default and can give us better battery ? I really search a kernel for a good battery life : )
What version do I need for HTC Sensation?
Remember to give THANKS were THANKS is due.
Try to install this kernel on TripNMiUI Beta, get the bootloop
I'm sorry it would help if I would read a little more. I found right Kernel, flashing now.
Remember to give THANKS were THANKS is due.
Works fine on cm7 for me. Although battery drain seems high, will report back after a full charge discharge cycle.
Sent from my Sensation 4G
Thanks, no Problems so far, but low benchmark results.
g3c said:
Thanks, no Problems so far, but low benchmark results.
Click to expand...
Click to collapse
using what benchmark app? quadrant is laughably useless on these device. seriously, run it several times in a row -- your scores will vary wildly. That is the definition of unreliable. The app may as well be a random number generator at this point. Also, it never bothers to use the second core.
r00tk1t said:
Try to install this kernel on TripNMiUI Beta, get the bootloop
Click to expand...
Click to collapse
It's tested on CM7. The MIUI ROMs at this point (and really a shocking number of other 'AOSP' ROMs) are drawing far too heavily on Sense to work well with this kernel (or the kernel packed in CM7 for that matter).
r00tk1t said:
Try to install this kernel on TripNMiUI Beta, get the bootloop
Click to expand...
Click to collapse
damn, was hoping to use this with trip's miui and hopefully fix the bt sound issues
Hey cayniarb, love the kernel any idea what's instore for the next release? More gpu and bus oc?
Sent from my Sensation 4G
Good to see you here, cayniarb. See you on IRC.
r00tk1t said:
Try to install this kernel on TripNMiUI Beta, get the bootloop
Click to expand...
Click to collapse
Cayniarb said:
It's tested on CM7. The MIUI ROMs at this point (and really a shocking number of other 'AOSP' ROMs) are drawing far too heavily on Sense to work well with this kernel (or the kernel packed in CM7 for that matter).
Click to expand...
Click to collapse
Working just fine for me on TripNMiUI.
I used Tiamat on Evo and it worked great
Cant wait to try this out
Thanks OP!!!
Cayniarb said:
using what benchmark app? quadrant is laughably useless on these device. seriously, run it several times in a row -- your scores will vary wildly. That is the definition of unreliable. The app may as well be a random number generator at this point. Also, it never bothers to use the second core.
Click to expand...
Click to collapse
I used CF-Bench
~7500 with faux v0.1.4 @ 1.67 and cm7
~5300 with tiamat v1.0.0 @ 1.67 and cm7
Do you have other results?
turkeyshark said:
Working just fine for me on TripNMiUI.
Click to expand...
Click to collapse
does bt sound work for you? thats the big problem. pairs easy but no sound.
---------- Post added at 08:23 AM ---------- Previous post was at 08:11 AM ----------
detroit2hi said:
I used Tiamat on Evo and it worked great
Cant wait to try this out
Thanks OP!!!
Click to expand...
Click to collapse
same here! great kernals for the evo
cmart4 said:
does bt sound work for you? thats the big problem. pairs easy but no sound.
Sorry don't use bt so no idea
Click to expand...
Click to collapse
Attached is a quick compile of the newly released kernel source.
The only thing I have changed so far is to add 3 overclocked frequencies.
source is here:
https://github.com/dzo/kernel_ville
Flash it from CWM version 5.8.3.1 or later
It boots at 1.8GHz
Does wifi work alright with this?
This is for Eu one s?
Flashed on BlackDragon v5.0 with DualCore Mod already in place...now o/c'ed at 1.8GHz. Thanks for the (extremely quick!!!) work, mate!!
On trickdroid 3.0 us, just flashed zip and am over locked and ready to rumble.
Sent from my HTC VLE_U using xda premium
intervigil said:
Does wifi work alright with this?
Click to expand...
Click to collapse
I was/am on my wifi connection all day, and it had no effect on connection after flash. I have data turned off when I'm in the house (since it's so spotty anyway and I pay for the wifi). I think you're safe.
How's the battery life after flashing?
Sent from my HTC VLE_U using xda premium
Does it work on stock rom?
Sent from my HTC One S using XDA
McGiver93 said:
Does it work on stock rom?
Sent from my HTC One S using XDA
Click to expand...
Click to collapse
Yep, I see no reason why it shouldn't work on Stock.
I flashed it but my Max Ita 1.5ghz :/ ill try with the new version in the other thread. Thanks for info
Sent from my HTC One S using XDA
For me, I would like this kernel in the future, implement some other CPU governors such as SmartassV2 or Savedgen etc. Also, some more I/O schduler such as VR or simple or SIO.
And please overclock the GPU!
I think that one most important mod is overclock and undervolt and later custom governor and I/O scheduler!
hi, kenrel doe not work for CM9...i think it is the boot img...
CM9 is different to stock.... wouldn't work
Sent from my HTC One S
you where quick there... didn't think you had already done a kernel from source. Thank you for that work.
I am sorry but for me the Kernel does not show more frequencies in SetCPU.
I am running Leedroid 2.1 on an EU phone with htcdev unlock and cid changed to htc germany.
The kernel installed without errors trying both CWM 5.8.3.1 Touch and no Touch.
It simply does not go above 1512 Mhz.
Ideas?
trismegistos said:
hi, kenrel doe not work for CM9...i think it is the boot img...
Click to expand...
Click to collapse
It'll be the initrd, take the CM9 boot.img and replace the kernel in it with the one in my boot.img using abootimg.
Sneakyghost said:
you where quick there... didn't think you had already done a kernel from source. Thank you for that work.
I am sorry but for me the Kernel does not show more frequencies in SetCPU.
I am running Leedroid 2.1 on an EU phone with htcdev unlock and cid changed to htc germany.
The kernel installed without errors trying both CWM 5.8.3.1 Touch and no Touch.
It simply does not go above 1512 Mhz.
Ideas?
Click to expand...
Click to collapse
What kernel version does it report, it should say 3.0.8-g8bd784d [email protected] If not, it hasn't flashed correctly.
Try booting or installing it using fastboot instead.
dzo said:
What kernel version does it report, it should say 3.0.8-g8bd784d [email protected] If not, it hasn't flashed correctly.
Try booting or installing it using fastboot instead.
Click to expand...
Click to collapse
OK you are right apparently it didnt install correctly. Kernel reports 3.0.8-01136-g9d2ad31 [email protected]#1.
would you mind telling me how to flash it using fastboot?
Thanks.
[EDIT]
Nevermind. Used LeeDroid's boot image flasher to learn the commands. Thanks for your work. Kernel is working good. Will no observe its impact on battery drain and performance.
fxzy said:
For me, I would like this kernel in the future, implement some other CPU governors such as SmartassV2 or Savedgen etc. Also, some more I/O schduler such as VR or simple or SIO.
And please overclock the GPU!
Click to expand...
Click to collapse
Would you like some fries with that as well sir?
Just flashed thru CWMR and working well. Using No frills CPU to set overclock and governor. Running awesome with no hiccups at 1.8. I have a US phone running Leedroid also with EU radio( getting better signal than US).
Sent from my HTC VLE_U using Xparent Cyan Tapatalk 2
Fusion Kernel for the One S (S4)
Lastest Version: v1.1 (7/18/12)
This kernel is no longer supported. I have completely re-based from scratch and released a new kernel, Fusion Ultimate. Please check it out.
Thanks for all the support.
This is a kernel based off of the lastest US T-Mobile sources that just released.
It is compatible with all One S's with an S4 processor.
*Disclaimer*
Code:
I am not responsible for anything that happens to your device.
By using this you are taking full responsibility blah blah blah....
...you get the point
As there are many people working on ROMs for the One S, I have decided to start maintaining a custom kernel for it. Again, this is based off of the TMOUS kernel sources that just released a few days ago. I will add more and more features to it for new releases. Note that this is only compatible with stock Sense-based ROMs, not AOSP-based ROMs like CM9 or AOKP. Maybe in the future I will create an AOSP version. Enjoy
v1.0 (Initial Release)
- Based off the T-Mobile US kernel sources
- All features from mdeejay's latest virtuous kernel
- Overclocked to 2.1Ghz by default --> use SetCpu or similar app to change
- Added SmartassV2 governor (gives extraordinary battery life and performance, look here)
- tweaked SmartassV2 frequencies for better compatibility
- insecure kernel (root in adb)
v1.1
- Fixed CPU issues from virtuous kernel (hopefully)
- Enabled init.d scripts support with busybox run-parts
- Reverted to stock GPU 2D and 3D frequencies
- CPU now default 1.5Ghz
- SmartassV2 as default governor
- make CPU1 (second core) to be online
- good battery life
Click to expand...
Click to collapse
Downloads
The zip packages are named with the date of their release.
v1.0 (boot-071712.img): http://d-h.st/vtX
v1.1 (boot-071812.zip): http://d-h.st/jsd
How to install:
Flash the zips with TWRP recovery.
Kernels will be in zips now. The reason is because some stock patch scripts from /system/etc were interfering with the CPU frequency settings, hence some the issues from Virtuous kernel. The zips flash the patch scripts as well as the kernel.
Sources
Ramdisk is here: https://github.com/klin1344/initramfs_ville
Kernel is here: https://github.com/klin1344/kernel_ville_US
Credits
Special thanks to mdeejay for his awesome work on his kernel. Also want to thank the whole dev community here. You guys are great!
reserved...
This one too.
Well well
Sent from my HTC VLE_U using xda app-developers app
Cool thanks
Sent from my HTC VLE_U using xda premium
Klin. Do you know if with this kernel there's issues controlling the CPU? Like for example down scaling the speed for both cores or having the governors activate on both cores? I've had that issue before.
Sent from my HTC VLE_U using xda premium
ickedmel said:
Klin. Do you know if with this kernel there's issues controlling the CPU? Like for example down scaling the speed for both cores or having the governors activate on both cores? I've had that issue before.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
You mean from the virtuous kernel? I'm not quite sure what you mean, since I've never had issues myself..
Could you give a more detailed explanation of the problem? I will definitely look into it.
Sent using Tapatalk
Let the kernel games begin.
Posted With Axiom One S using TapaTalk2!
klin1344 said:
You mean from the virtuous kernel? I'm not quite sure what you mean, since I've never had issues myself..
Could you give a more detailed explanation of the problem? I will definitely look into it.
Sent using Tapatalk
Click to expand...
Click to collapse
What he means is do the clock settings stick after reboot. In virtuous kernel it went back to Max from boot and the settings had to be set again.
Posted With Axiom One S using TapaTalk2!
itsmikeramsay said:
What he means is do the clock settings stick after reboot. In virtuous kernel it went back to Max from boot and the settings had to be set again.
Posted With Axiom One S using TapaTalk2!
Click to expand...
Click to collapse
That was one problem. Some people, myself included, also had an issue where the kernel settings were only applied to CPU0. CPU1 would stay at whatever the kernel's default min/max speeds were regardless of the settings in SetCPU (or any other cpu app for that matter).
njeske said:
That was one problem. Some people, myself included, also had an issue where the kernel settings were only applied to CPU0. CPU1 would stay at whatever the kernel's default min/max speeds were regardless of the settings in SetCPU (or any other cpu app for that matter).
Click to expand...
Click to collapse
Thanks yes that's what I mean.
Sent from my HTC VLE_U using xda premium
Don't use SetCPU. I use Systuner but CPU Master worked great too.
itsmikeramsay said:
What he means is do the clock settings stick after reboot. In virtuous kernel it went back to Max from boot and the settings had to be set again.
Posted With Axiom One S using TapaTalk2!
Click to expand...
Click to collapse
njeske said:
That was one problem. Some people, myself included, also had an issue where the kernel settings were only applied to CPU0. CPU1 would stay at whatever the kernel's default min/max speeds were regardless of the settings in SetCPU (or any other cpu app for that matter).
Click to expand...
Click to collapse
Okay thanks. I will do some research and testing tomorrow and look into the issue.
Sent using Tapatalk
u make aosp version now!!!!!
thanks
c19932 said:
u make aosp version now!!!!!
*Removed the useless spaces here*
thanks
Click to expand...
Click to collapse
Little bit of spam worth those spaces,don't your think? Anyway, great job OP! Will flash soon!
Sent from my HTC VLE_U using xda premium
Been waiting very impatiently for someone to pick up the new source code and made a kernel, thanks so much for your work on this. Quick question tho, is vsync still turned on? It seems to me that it is.
Sent from my HTC VLE_U using xda premium
quick question--- can this new kernel work with any rom? such as the AxiomS or the PARANOIDANDROID? and 2.1GhZ... that's maad fast, cant wait to try it! thanks
strker45 said:
Been waiting very impatiently for someone to pick up the new source code and made a kernel, thanks so much for your work on this. Quick question tho, is vsync still turned on? It seems to me that it is.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
If it was in virtuous kernel, then it is here. I haven't gone through to change some of the stuff from virtuous kernel yet.
marokkino13 said:
quick question--- can this new kernel work with any rom? such as the AxiomS or the PARANOIDANDROID? and 2.1GhZ... that's maad fast, cant wait to try it! thanks
Click to expand...
Click to collapse
It will work on sense based ROMs only.
Sent using Tapatalk
confirmed multi touch issue
Sent from my HTC VLE_U using xda app-developers app
same problems of mdeejay kernel, multitouch issue, also some flickering (maybe because of vsync off)
Finally after someone pm'd me I looked back into GPU Overclocking.
New thread created issues with old thread OP permissions (people seem to be asking the same questions over and over again all information will be kept in OP & DO READ THE THREAD, repetitive questions will now be ignored)
Benefits:
Smoother UI
Handle 2d & 3d core GPU intensive applications & games
Currently only 2D core has been overclocked working on 3D core OC
2D-core original value - 192mhz OC to 245mhz DONE achieved 25% performance boost grp_2d_clk outputs 245760000hz
3D-core original value - 245mhz OC to 300+mhz WIP hoping to achieve 40-50% performance boost
2D-core OC only Download: Coming soon...
Download Links for other devices coming soon...
Works for all HTC Sense/Cm9/Cm10 kernels (Just ask a kernel developer for your device to implement the source code)
Note: Don't have internet on PC so providing 3 main files that need replaced for 2D-core OC to work
Download link to source code: http://d-h.st/wbH
3D-CORE OC TESTS Download: Coming soon...
Do check under sys/kernel/debug/htc_clock/clks/ look for file with all clocks & look for GRP_clks (Graphics clock)
OK so basically today I've been thinking and I've come to the conclusion that I will release the 2D-core OC patch As Soon As Possible, 3D-core Core OC is NOT Impossible but for now I'll give it a break, I will attempt 3D-core OC If/When I can get a hold of a msm7x30/msm8x55 device, as it will make it much easier for both me & users.
So for now you can enjoy the 50mhz increase/bump up, perf boost 25% in 2D-core (will increase performance in both 2D/3D intensive appications as 2D-core is used for 3D AFAIK and increase User Interface performance (Note: This will not take a hit on battery life)), I will also release a couple of fixes on patchas kernel that shouldnt be there/set etc.
(Theres a device available in my area for roughly £90, if anyone wants to contribute towards getting that device or can donate a device , more than welcome and shoot me a PM so I can list you here.)
(This isnt a promise of 3D-Overclock if you donate, if you donate please do so expecting nothing I will only attempt 3D-overclock)
Working device list - all kernel 3.0+ msm7x30/msm8x55 soc devices.
Main thread is in Desire HD Android Development section: http://forum.xda-developers.com/show....php?t=2368497
thanks for your work
i m just curious
what s the difference with this:
3d: https://github.com/kylon/AndromadusMod-New/commit/bccb6227f629d5dbb6687e0aa851dd86b4fac01a
2d/ increase 3d: https://github.com/kylon/AndromadusMod-New/commit/e623d0449be04081d0418b799fbe3737371dd56c#diff-137 (this is a big commit, sorry)
there is a good performance boost with this, also, now, you can see 8fps on Antutu (openGL 2.0) (6/6.5 before)
tested on cm10.1
What is this.? Kernel patch... Working with our desire S with cm 10.1 instaled and stock kernel that come with Flinny last 24.2 test built?
Sent from my Desire S using Tapatalk 2
kylon said:
thanks for your work
i m just curious
what s the difference with this:
3d: https://github.com/kylon/AndromadusMod-New/commit/bccb6227f629d5dbb6687e0aa851dd86b4fac01a
2d/ increase 3d: https://github.com/kylon/AndromadusMod-New/commit/e623d0449be04081d0418b799fbe3737371dd56c#diff-137 (this is a big commit, sorry)
there is a good performance boost with this, also, now, you can see 8fps on Antutu (openGL 2.0) (6/6.5 before)
tested on cm10.1
Click to expand...
Click to collapse
Hi I'm unable to look at patch no.2 its too big for the laptop to handle but to comment on the first one it takes more than modifying the kernel graphics software layer platform data to overclock the kernel especially if its the 3d core it takes more, the msm7x30/msm8x55 is a very unique soc, im not sure where those values were pulled from but sure doesnt make sense. Afaik no one has yet managed 2d oc nvm 3d oc until now... :s
You can find them in the incredible s dev section
We have the same soc
Sent from my Desire S using Tapatalk 4 Beta
kylon said:
You can find them in the incredible s dev section
We have the same soc
Sent from my Desire S using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yeah basically ive seen it all, all the commits on the devices with this gpu oc only modified the kgsl pdata with random values they want LOL, its false that isnt how it works, the 2d oc i done is 100x easier than 3d oc and look, i modified more than the kgsl pdata just to get the 2d-core running a measly 50mhz boost.
Hi! How can apply this patch?
AFAIK you´re no kernel dev, right? Maybe by reading OP
Download Links for other devices coming soon...
Works for all HTC Sense/Cm9/Cm10 kernels (Just ask a kernel developer for your device to implement the source code)
Click to expand...
Click to collapse
El Aero said:
Hi! How can apply this patch?
Click to expand...
Click to collapse
Download the .zip and flash in the recovery.
NVardan said:
Download the .zip and flash in the recovery.
Click to expand...
Click to collapse
Lol
NVardan said:
Download the .zip and flash in the recovery.
Click to expand...
Click to collapse
not sure about this))
Отправлено c моего Desire S
El Aero said:
not sure about this))
Отправлено c моего Desire S
Click to expand...
Click to collapse
teadrinker said:
Lol
Click to expand...
Click to collapse
It didn't work for me too lol.
Sent from my Desire S using Tapatalk 4 Beta
NVardan said:
Download the .zip and flash in the recovery.
Click to expand...
Click to collapse
Nah. There is no zip. Link in the op is for source. So a developer like kaylon have to merge it. OP just posted the source he is trying to compile not made any kernel yet. If I'm reading the OP right.
Wow I'm still a noob
niravnn said:
Nah. There is no zip. Link in the op is for source. So a developer like kaylon have to merge it. OP just posted the source he is trying to compile not made any kernel yet. If I'm reading the OP right.
Wow I'm still a noob
Click to expand...
Click to collapse
Thanks for clarifying! I thought, it should have been flashed as a .zip. My noob level is over 9000.
I hope amidabuddha includes this in his awesome kernel
Sent from my Desire S using xda app-developers app
NVardan said:
Thanks for clarifying! I thought, it should have been flashed as a .zip. My noob level is over 9000.
Click to expand...
Click to collapse
Holy Jesus, just open the .zip you've downloaded...really :laugh:
seems it is not working on my kernel
based on what you said in the dhd dev section i should see 245mhz in /sys/kernel/debug/htc_clock/list_clocks or in /sys/kernel/debug/clk/grp_2d_clk/rate
but they say 192
while i can see 245 in sys/devices/platform/kgsl-2d0.0/kgsl/kgsl-2d0/gpuclk
your files are different, especially kgls_pwrctrl(you are using an old kgsl)
maybe the jb kernel needs some more edits
kylon said:
seems it is not working on my kernel
based on what you said in the dhd dev section i should see 245mhz in /sys/kernel/debug/htc_clock/list_clocks or in /sys/kernel/debug/clk/grp_2d_clk/rate
but they say 192
while i can see 245 in sys/devices/platform/kgsl-2d0.0/kgsl/kgsl-2d0/gpuclk
your files are different, especially kgls_pwrctrl(you are using an old kgsl)
maybe the jb kernel needs some more edits
Click to expand...
Click to collapse
Push your code to github n link me to it n ill have a look at it
I cannot push the code to github
I can give you my files, tonight
EDIT:
the 3d oc is still there, even if it is not a real oc, it gives us a performance boost