Database Info

Fpse - first impressions - sixaxis controller

A copy and paste of the what I posted on the Fpse forum since I thought people here might be interested.
I have an Asus Transformer, and a wireless PS3 controller via Sixaxis Controller app
After fiddling with Fpse for a couple of hours, here is my impression:
Menus are very buggy:
Most settings have trouble saving - took me 3 try tries to get Country - Europe to save, other settings are hit and miss
Controller input settings never save - Every time I load Fpse I have to re-input the controller settings under "Hardware keys"
- Please fix this!!!!
Controls are OK:
Once the controls are mapped, they work pretty much as expected
No analog emulation for digital keys = I can't play ape escape with my wireless PS3 controller, bummer.
Definitely needs analog emulation for digital key presses
I might be able to find a work around for the analog with Sixaxis Controller app, not sure. Still getting used to the app
Audio - Sometime great, sometimes not so great
The audio appears tied into the frame rate - if Frameskip is on, it also appears to skip the audio, resulting in choppy audio
When games run at full frame rate, the audio is pretty good.
Games seem to work just fine
Games appear to be working just as they should, nothing spectacular, nothing bad, which is a very good thing.
Performance seems a little slow, but that could be the Transformer not having enough CPU power, or Fpse.
This post may not seem negative, but it is really not. Any problems I didn't experience means they are not there, which means a lot of things work great. It's hard to find things that are working correctly, because if they are working correctly, you should never notice they are there. I also know this is a relatively new app, and Android is a new operating system. It takes time to get things to work correctly.
I am very satisfied with Fpse. But getting the menu to save the controller settings and adding analog emulation would go a long way to making even more satisfied and telling more people about Fpse (hint, hint). A playstation emulator without a proper control setup kills the fun outright.

I installed CM7 nightly 25 for my SGSII and installed the sixasis app, configured just fine with FPse and worked everytime I started it up again, remembered just fine.
Didn't test analog though.
I configured the control and then saved it as default under settings.
If you load a game that already has a config or save you need to re-enter the controls and save again as default, this will be for that game then...
after that it works fine

Hi ...
I was trying to use the sixasis, and I could use it fine on the phone...
The problem is that I cannot use it with FPse...
Anyone can help me about how to set it ?
Thanks

What specifically are you having problems with?
1) Connect the PS3 controller via sixaxis controller app
2) Configure the PS3 controller buttons in sixaxis, i.e. what keyboard button you want each PS3 button to emulate
3) Disconnect and reconnect to Sixaxis controller app
4) Open FPse and load a game
5) Configure the controls in FPse to use the PS3, Remember sixaxis controller app makes the PS3 controller emulate keyboard buttons, so configure key bindings
6) In FPse, under system, click save default settings. If you don't do this you have to rebind the PS3 controller keys every time you start FPse
7) Play game

typci said:
What specifically are you having problems with?
5) Configure the controls in FPse to use the PS3, Remember sixaxis controller app makes the PS3 controller emulate keyboard buttons, so configure key bindings
Click to expand...
Click to collapse
That's the problem ...
I can use the controller in all other operations on the phone, but I'm not able to configure correctly the sixaxis for the FPse ...

fiuwe said:
That's the problem ...
I can use the controller in all other operations on the phone, but I'm not able to configure correctly the sixaxis for the FPse ...
Click to expand...
Click to collapse
Same issue here Were you able to get it working? If so please send link. I'm still searching for a solution.

Both work great for me on tf. There were recent issues if you were using the opengl plugin and tried to bind keys, but the newest update fixed it.
Sent from my ADR6300 using xda premium

Which specific ps3 wireless controller do you guys recommend?

anyone figure it out?

Bluetooth Gamepad

Has anyone tested a bluetooth gamepad with the Infinity yet, they they would recommend? Maybe the Phonejoy, or...?
I assume I want bluetooth so I can use it without having to have the dock or a USB adapter connected, but I'm not sure if there are any drawbacks to bluetooth over wired/or wireless USB. Any advice would be appreciated. Thanks!

GregFromUtah said:
Has anyone tested a bluetooth gamepad with the Infinity yet, they they would recommend? Maybe the Phonejoy, or...?
I assume I want bluetooth so I can use it without having to have the dock or a USB adapter connected, but I'm not sure if there are any drawbacks to bluetooth over wired/or wireless USB. Any advice would be appreciated. Thanks!
Click to expand...
Click to collapse
I have ordered Phonejoy yesterday. Wait for 14 days and i'll let you know

will a ps3 controller with BT work ?

Crizthakidd said:
will a ps3 controller with BT work ?
Click to expand...
Click to collapse
I am also interested in this. I will test it when my Infinity comes today and let you know.
Sent from my HTC One X using Tapatalk 2

I'm sure the ps3 controller works since it does with the prime.

Nefariouss said:
I'm sure the ps3 controller works since it does with the prime.
Click to expand...
Click to collapse
I use the sixaxis tool which requires root but I got my dualshock 3 paired and working in no time.

I hope it works right with the Wii Classic Controller, that's all I have until I get the dock and can plugin an Xbox controller (I wonder if the wireless adapter works?). The Classic controller usually works great on my phone.

Xbox Wireless Controller works with Shadowgun, Riptide, GTA and Death Trigger.
Just plug-in the wireless receiver into the dock, and push the xbox symbol on the controller.
After a while, the blinking changes, and you can use the controller.
Badly, it doesn't stop blinking alike when you connect it to a PC or an Xbox.
I also was able to connect PS3 controllers to the Infinity via sixaxis, the controller also worked with all the games i wrote î.

Unfortunately PS3 gamepad doesnt work via bluetooth. It works with TF300 though. I thought the same method of attaching via USB syncing with it and removing cable would work. I see PS3 controller in bluetooth paired devices in TF300, not in TF700.
Sent from my ASUS Transformer Pad TF700T using xda premium

PS3 Controller will work with root plus utils
I was able to get a PS3 DualShock controller to work via Bluetooth with my TF700T + dock and root.
I plugged the controller into the USB port and then used PS3 Controller Pairing Tool to set the Bluetooth MAC address and then start up Sixaxis Controller app (requires root) to get the bluetooth link working.
PS3 Controller Pairing Tool:
play.google.com/store/apps/details?id=com.poke64738.ps3pairingtool
Sixaxis Controller:
play.google.com/store/apps/details?id=com.dancingpixelstudios.sixaxiscontroller
peare said:
Unfortunately PS3 gamepad doesnt work via bluetooth. It works with TF300 though. I thought the same method of attaching via USB syncing with it and removing cable would work. I see PS3 controller in bluetooth paired devices in TF300, not in TF700.
Sent from my ASUS Transformer Pad TF700T using xda premium
Click to expand...
Click to collapse

sandymacjr said:
I was able to get a PS3 DualShock controller to work via Bluetooth with my TF700T + dock and root.
I plugged the controller into the USB port and then used PS3 Controller Pairing Tool to set the Bluetooth MAC address and then start up Sixaxis Controller app (requires root) to get the bluetooth link working.
PS3 Controller Pairing Tool:
play.google.com/store/apps/details?id=com.poke64738.ps3pairingtool
Sixaxis Controller:
play.google.com/store/apps/details?id=com.dancingpixelstudios.sixaxiscontroller
Click to expand...
Click to collapse
Yes, I know that. I used that config with my old Samsung 10.1, but I don't want to root TF700. With TF300 it works out of the box. Same company, 2 tablets with so similar specs, and what works in a recent model does not in a newer one. Hard to understand.
Sent from my ASUS Transformer Pad TF700T using xda premium

I have been using the Onlive Universal Wireless Controller. It is a really sold piece of hardware and works with most bluetooth devices. For some tabs though it will be detected incorrectly and leave you spinning around uncontrollably in games by default. However I found this fix on an Onlive forum which has worked perfectly for me. You will need root access in order to perform the fix.
"su
cd /system/usr/keylayout/
mount -o remount,rw /system
cp Vendor_045e_Product_028e.kl Vendor_2378_Product_100a.kl
exit
exit"
Enjoy!

Received a PhoneJoy today. Haven't played much yet, but pretty much unusable with Bluez.
Bought and installed USB/BT Joystick Center which makes wonders.
Currently I have a setup for shadowgun and fantasy drive.
I would LOVE to know if there is any site/forum that has user exports to download, so I could import it in the Joystick Center app for my phonejoy and specific game?
There is some work to be done initially as it seems, but had 0 problems after setting things up.
Currently I have some 20 games, not all are playable with gamepad, but still around 10-15 games for which i will have to find imports or i'll have to go through a hassle myself.
If anyone else has PhoneJoy maybe we can start Export/Import sharing here on this forum (new thread)
Anyone?

I've been through a bunch of controllers, and I really prefer the PS3 controller over the phone joy, onlive, etc. I was turned off in the beginning due to people continuously mentioning the sixaxis app, but after getting it set up, it really works well and it just adds one step before gaming.
I'll make it simple.
First Time Setup
===============================================================
1. You get the application from Play.
2. Run it.
3. Hit the start button in the app.
4. Connect controller via USB cable. (you need it anyway to charge the controller)
5. Hit Pair then hit OK button
6. Unplug the controller
7. Hit the PS3 Button on the controller
8. Wait ~10 seconds.
9. Paired and Done! Now you can game.
Each Time You Want to Game
================================================================
1. Start Sixaxis App
2. Press Start in App
3. Press PS3 button on Controller
4. Wait ~10 seconds.
5. Game!
The above "each time you want to game" takes 15 seconds of your life to use a quality controller, so its REALLY not a big deal.
Just, don't buy PS3 controllers from ebay =) You have been warned!

I'm using ps3 controller over Bluetooth with six axis tool. Go to there official site for instructions.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
---------- Post added at 02:23 AM ---------- Previous post was at 02:16 AM ----------
You missed the very first step; use six axis pair tool to change Bluetooth address on ps3 controller to that of your tablets address.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2

No need to use the PC tool, I paired it successfully just plugging the DualShock 3 into the dock. The app then found the MAC address and I could pair it.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2

spinaldex said:
I've been through a bunch of controllers, and I really prefer the PS3 controller over the phone joy, onlive, etc. I was turned off in the beginning due to people continuously mentioning the sixaxis app, but after getting it set up, it really works well and it just adds one step before gaming.
I'll make it simple.
First Time Setup
===============================================================
1. You get the application from Play.
2. Run it.
3. Hit the start button in the app.
4. Connect controller via USB cable. (you need it anyway to charge the controller)
5. Hit Pair then hit OK button
6. Unplug the controller
7. Hit the PS3 Button on the controller
8. Wait ~10 seconds.
9. Paired and Done! Now you can game.
Each Time You Want to Game
================================================================
1. Start Sixaxis App
2. Press Start in App
3. Press PS3 button on Controller
4. Wait ~10 seconds.
5. Game!
The above "each time you want to game" takes 15 seconds of your life to use a quality controller, so its REALLY not a big deal.
Just, don't buy PS3 controllers from ebay =) You have been warned!
Click to expand...
Click to collapse
Are we requiring root for the above processes to work with Sixaxis? I really don't want to root my Infinity, because I don't see the need to. But I also want a controller that will work well. I wonder when Ouya releases there system, if there controller will work universally across android devices.
I didn't want to get an Ouya system though, because of there refusal to leave the standard android market on it, and refusal to support existing games. All games have to be purchased through there own app market.

Has anyone connected 2 controllers at once? One via BT and the other usb?

Finire said:
Are we requiring root for the above processes to work with Sixaxis? I really don't want to root my Infinity, because I don't see the need to. But I also want a controller that will work well. I wonder when Ouya releases there system, if there controller will work universally across android devices.
I didn't want to get an Ouya system though, because of there refusal to leave the standard android market on it, and refusal to support existing games. All games have to be purchased through there own app market.
Click to expand...
Click to collapse
App calls for root but I was wondering if that is true or not as well.
Sent from my PC36100 using xda app-developers app

I just pre-ordered the Nyko Playpad Pro from Gamestop,
FYI: As per Nyko, Gamestop will be the exclusive distributor for the Playpad Pro until February 2013.
Amazon has preorders on the Playpad and Playpad Pro but the Pro is not available until February 2013 as stated by Nyko. Bummer, I would have preferred to order almost anywhere other than Gamestop since their return policy stinks compared to most others. But I did not want to wait until February either....
Anyone else going for the Playpad or Playpad Pro?

Trouble bt pairing to my PS3 Sixaxis controller

Hi everyone. I really tried to do my due diligence on this before I posted. Everything I've read seems to indicate that ICS can pair PS3 controllers natively, with no need for the Sixaxis Android app, and no need for rooting. But I simply have no succeeded in doing so. I was trying with an older controller from the first generation of PS3s, and though that perhaps it was too old, so I went out and dropped $60 on a new official Sony Sixaxis Dual Shock 3, and I'm still have no luck. I have tried plugging the controller in by USB to the dock first, because some people seemed to indicate that that would help the two devices pair better. And while plugged in by USB, it works fine, I can map the buttons in emulators and use them with no problem. But when I unplug the control pad, hit the Sony button in the middle, and let the TF700 search for devices, it never finds my controller. It's found a Wiimote with no problem, but then of course it wants a pin, and that's its own problem. It's even found my Xperia Play on bluetooth, so I know it's not the bluetooth hardware. Does anyone have any suggestions for me? Sixaxis obviously won't work since there's no root method. Any help would be greatly appreciated. Thanks.

ProcyonSJJ said:
Hi everyone. I really tried to do my due diligence on this before I posted. Everything I've read seems to indicate that ICS can pair PS3 controllers natively, with no need for the Sixaxis Android app, and no need for rooting. But I simply have no succeeded in doing so. I was trying with an older controller from the first generation of PS3s, and though that perhaps it was too old, so I went out and dropped $60 on a new official Sony Sixaxis Dual Shock 3, and I'm still have no luck. I have tried plugging the controller in by USB to the dock first, because some people seemed to indicate that that would help the two devices pair better. And while plugged in by USB, it works fine, I can map the buttons in emulators and use them with no problem. But when I unplug the control pad, hit the Sony button in the middle, and let the TF700 search for devices, it never finds my controller. It's found a Wiimote with no problem, but then of course it wants a pin, and that's its own problem. It's even found my Xperia Play on bluetooth, so I know it's not the bluetooth hardware. Does anyone have any suggestions for me? Sixaxis obviously won't work since there's no root method. Any help would be greatly appreciated. Thanks.
Click to expand...
Click to collapse
I couldn't connect my ps3 controller to my galaxy nexus without sixaxis. With root and sixaxis it worked immediatly.

ProcyonSJJ said:
Hi everyone. I really tried to do my due diligence on this before I posted. Everything I've read seems to indicate that ICS can pair PS3 controllers natively, with no need for the Sixaxis Android app, and no need for rooting. But I simply have no succeeded in doing so. I was trying with an older controller from the first generation of PS3s, and though that perhaps it was too old, so I went out and dropped $60 on a new official Sony Sixaxis Dual Shock 3, and I'm still have no luck. I have tried plugging the controller in by USB to the dock first, because some people seemed to indicate that that would help the two devices pair better. And while plugged in by USB, it works fine, I can map the buttons in emulators and use them with no problem. But when I unplug the control pad, hit the Sony button in the middle, and let the TF700 search for devices, it never finds my controller. It's found a Wiimote with no problem, but then of course it wants a pin, and that's its own problem. It's even found my Xperia Play on bluetooth, so I know it's not the bluetooth hardware. Does anyone have any suggestions for me? Sixaxis obviously won't work since there's no root method. Any help would be greatly appreciated. Thanks.
Click to expand...
Click to collapse
There is in fact a root method (look for debugfs, don't have the link handy), I use sixaxis and have my PS3 controller paired to my Infinity the day I got it.

I was able to use my PS3 Sixaxis controller on my TF101 with ICS (via bluetooth), but not on the TF700 for some reason.... It only seems to work while cabled (with the TF101, after using it for a minute as a "wired" controller, it automatically paired itself via bluetooth - after the first minute, you didn't need the cable anymore... Not sure why it doesn't work on the TF700. Strange...
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2

It seems like (for whatever reason) Asus did not include the drivers for Ps3 controller in TF700. On my Prime and OG TF, it would automatically pair after using it once over USB. Not a big issues though as I had already purchased Sixxas app.

SixAxis app works great to connect the PS3 controller to the device, but it does *not* satisfy all requirements that the built-in drivers that other tablets and CM9 does. For example, I am an OnLive subscriber and the PS3 controller does not work whatsoever with SixAxis. However, I can plug it in via USB, or use a Xbox360 controller and they work great. This isn't a HUGE issue at the moment, but I did have dreams of having multiple Ps3 controllers and plugging the 700 in to my 60" on occasion. I have also found that when using the PS3 controller even with SixAxis' gamepad emulation, it often doesn't allow the right analog stick to function. At the moment, this is working much worse than on my TF101 w/ CM9 on it.

spinaldex said:
SixAxis app works great to connect the PS3 controller to the device, but it does *not* satisfy all requirements that the built-in drivers that other tablets and CM9 does. For example, I am an OnLive subscriber and the PS3 controller does not work whatsoever with SixAxis. However, I can plug it in via USB, or use a Xbox360 controller and they work great. This isn't a HUGE issue at the moment, but I did have dreams of having multiple Ps3 controllers and plugging the 700 in to my 60" on occasion. I have also found that when using the PS3 controller even with SixAxis' gamepad emulation, it often doesn't allow the right analog stick to function. At the moment, this is working much worse than on my TF101 w/ CM9 on it.
Click to expand...
Click to collapse
I wish I could run OnLive here in my country, because as far as I can tell, the app should behave exactly the same with OnLive when the 'Preferences->Gamepad Settings->Enable Gamepad' option is enabled. Evidently there are some differences that are causing issues. I'm not sure what problem you're having with the right analog stick, but you should ensure that you don't have any touch profiles enabled when in native gamepad mode, as they will override the gamepad inputs.

Can we expect Asus to resolve this (Bluetooth built-in connection) along with JB?

SurferLTU said:
Can we expect Asus to resolve this (Bluetooth built-in connection) along with JB?
Click to expand...
Click to collapse
Don't get your hopes up.
About the only "viable" way I could see ASUS doing this would be if they made and marketed their OWN controller that could also be used with teh PS3 systems. But that would be still a limited market and would not be financially viable for them.

Well I thought I let you guys know pairing PS3 via the dock is working Idk if it's jellybean or clean room 2.3 feature but I have out working so far, check it out
Sent from my HTC .....oh wait its stuck at customs

PhyscoAssassinx said:
Well I thought I let you guys know pairing PS3 via the dock is working Idk if it's jellybean or clean room 2.3 feature but I have out working so far, check it out
Click to expand...
Click to collapse
Works also with stock JB.

Confirmed JB works
Just confirming that the JB update includes the drivers to use the SIXAXIS controller. I just got my TF700 and it wouldn't even detect the controller in ICS in the bluetooth menu, but it did respond when it was plugged in via USB.
Just updated to JB and plugged in the controller. As soon as I turned it on it added the controller to the paired devices list in the bluetooth menu and now it works flawlessly!
Cheers

USB OTG and Logitech F310

I received my OTG cable in the mail today and wanted to start gaming the right way with my Logitech F310 gamepad but my phone didn't recognize it at all. I tested the controller with Dead Trigger but I got no response. The green "Mode" button comes on when pressed but that's it. I thought that my gamepad would work just fine with my OTG cable because my computer recognizes it as an Xbox 360 controller. Has anybody gotten one of these to work with their S4? Thanks in advance!

xDecapitator said:
I received my OTG cable in the mail today and wanted to start gaming the right way with my Logitech F310 gamepad but my phone didn't recognize it at all. I tested the controller with Dead Trigger but I got no response. The green "Mode" button comes on when pressed but that's it. I thought that my gamepad would work just fine with my OTG cable because my computer recognizes it as an Xbox 360 controller. Has anybody gotten one of these to work with their S4? Thanks in advance!
Click to expand...
Click to collapse
Firstly, not all games support gamepads, secondly if you have the 360 controller, i hear theyre better supported c:
and lastly, you can try getting an app that manages the controller and interfaces it with the app, maps it to the touch controls of its not supported for example, theres a few out there, havent tried any myself because i only have a ps3 controller and couldnt get it working with sixaxis :c

CountParadox said:
Firstly, not all games support gamepads, secondly if you have the 360 controller, i hear theyre better supported c:
and lastly, you can try getting an app that manages the controller and interfaces it with the app, maps it to the touch controls of its not supported for example, theres a few out there, havent tried any myself because i only have a ps3 controller and couldnt get it working with sixaxis :c
Click to expand...
Click to collapse
For anyone wondering, I was able to find a solution! I bought the USB/BT JoyCenter app and it recognized my F310 in XInput mode (the switch on the bottom). Using the app, I was able to map the buttons.
On a side note, my aftermarket Power A Playstation 3 controller works automatically with some games without any extra software.

xDecapitator said:
For anyone wondering, I was able to find a solution! I bought the USB/BT JoyCenter app and it recognized my F310 in XInput mode (the switch on the bottom). Using the app, I was able to map the buttons.
On a side note, my aftermarket Power A Playstation 3 controller works automatically with some games without any extra software.
Click to expand...
Click to collapse
please name the app for this solution again.
I can't found in playstore.
I use Samsung Note 3 + OTG cable. It can be use with cheap controller but it cann't active with F310.

pungcheer said:
please name the app for this solution again.
I can't found in playstore.
I use Samsung Note 3 + OTG cable. It can be use with cheap controller but it cann't active with F310.
Click to expand...
Click to collapse
https://play.google.com/store/search?q=usb controller&c=apps

Hey,
My experience has been very flakey with the f310 but I can confirm that it does work. In some games such as asphalt 8 you don't need the joycenter app. Just mess around with it.

xdecapitator said:
i received my otg cable in the mail today and wanted to start gaming the right way with my logitech f310 gamepad but my phone didn't recognize it at all. I tested the controller with dead trigger but i got no response. The green "mode" button comes on when pressed but that's it. I thought that my gamepad would work just fine with my otg cable because my computer recognizes it as an xbox 360 controller. Has anybody gotten one of these to work with their s4? Thanks in advance!
Click to expand...
Click to collapse
i second this question

Splashtop 2 with Controller Support

hey guys,
thought id share that splashtop 2 now supports controllers, mainly the xbox 360 controller but ive been testing with a ps3 controller (bluetooth) and it works surprisingly well, the ps3 controller seems to have an issue with deadzone with the analog sticks (ive contacted suppot) but other than that latency is low and very playable, ive been testing it on a 801.11n 2.5ghz network about 20+ meters away from my router and it was still playable.
To enable controller support, you need to install a driver,
open cmd with admin permissions an run cd "c:\Program Files (x86)\Splashtop\Splashtop Remote\Server\GamePad" then install_driver64.bat (or install_driver.bat for 32bit e.g.)
Restart splashtop and it should work, still the fullscreen game limitation but most games support borderless and/or windowed mode.
Enjoy

JoinTheRealms said:
hey guys,
thought id share that splashtop 2 now supports controllers, mainly the xbox 360 controller but ive been testing with a ps3 controller (bluetooth) and it works surprisingly well, the ps3 controller seems to have an issue with deadzone with the analog sticks (ive contacted suppot) but other than that latency is low and very playable, ive been testing it on a 801.11n 2.5ghz network about 20+ meters away from my router and it was still playable.
To enable controller support, you need to install a driver,
open cmd with admin permissions an run cd "c:\Program Files (x86)\Splashtop\Splashtop Remote\Server\GamePad" then install_driver64.bat (or install_driver.bat for 32bit e.g.)
Restart splashtop and it should work, still the fullscreen game limitation but most games support borderless and/or windowed mode.
Enjoy
Click to expand...
Click to collapse
I'm having a little trouble with this. I've seen a few other people online with the same problem, just no answers yet. I did everything just as you said there, just as the splashtop website says, that is. I had it say "echo off" and then a few seconds later, windows asked me if I wanted to install the driver. So I did, it installed, and I restarted splashtop. I even restarted my pc, when that failed. Either way, when I plug my Xbox 360 Controller for Windows into the usb of the dock of my ASUS tf300t, it just blinks the green circle and the only control I have is the left analog, and maybe like one other button. Any ideas?

Coming_down said:
I'm having a little trouble with this. I've seen a few other people online with the same problem, just no answers yet. I did everything just as you said there, just as the splashtop website says, that is. I had it say "echo off" and then a few seconds later, windows asked me if I wanted to install the driver. So I did, it installed, and I restarted splashtop. I even restarted my pc, when that failed. Either way, when I plug my Xbox 360 Controller for Windows into the usb of the dock of my ASUS tf300t, it just blinks the green circle and the only control I have is the left analog, and maybe like one other button. Any ideas?
Click to expand...
Click to collapse
Hmm are you using a custom rom? with my tests i used a ps3 controller and sixaxis app to access it, also does this happen on native android games? try recreate a driver using usb/bt control app

JoinTheRealms said:
Hmm are you using a custom rom? with my tests i used a ps3 controller and sixaxis app to access it, also does this happen on native android games? try recreate a driver using usb/bt control app
Click to expand...
Click to collapse
No custom rom. I do not have the tablet rooted at all, which disables me from being able to use the sixaxis app to test my ps3 controller or the usb/bt app. However, you are correct, both the PS3 controller and the Xbox360 controller for windows work perfectly on native android apps like GTA:Vice City and various emulators. So I guess that just leaves Splashtop. I'm nearly 100% certain that the Splashtop software the tf300t comes pre-loaded with is Splashtop 2. But I could be wrong.

Coming_down said:
No custom rom. I do not have the tablet rooted at all, which disables me from being able to use the sixaxis app to test my ps3 controller or the usb/bt app. However, you are correct, both the PS3 controller and the Xbox360 controller for windows work perfectly on native android apps like GTA:Vice City and various emulators. So I guess that just leaves Splashtop. I'm nearly 100% certain that the Splashtop software the tf300t comes pre-loaded with is Splashtop 2. But I could be wrong.
Click to expand...
Click to collapse
Oh make sure you download the latest splashtop 2 app from playstore, if you haven't already thats almost certainly your problem

JoinTheRealms said:
Oh make sure you download the latest splashtop 2 app from playstore, if you haven't already thats almost certainly your problem
Click to expand...
Click to collapse
Yeah, I did that too. lol. Still no go. I then went back and uninstalled and reinstalled all the software. Still no go. I was now thinking I'm just going to have to use a ps3 controller connected wirelessly to my pc upstairs, but that would require me spending another 15 bucks on a bluetooth usb adapter. I don't want to do that. lol.

Coming_down said:
Yeah, I did that too. lol. Still no go. I then went back and uninstalled and reinstalled all the software. Still no go. I was now thinking I'm just going to have to use a ps3 controller connected wirelessly to my pc upstairs, but that would require me spending another 15 bucks on a bluetooth usb adapter. I don't want to do that. lol.
Click to expand...
Click to collapse
Maybe time to switch to CromiX and try? im actually surprised there are people who haven't yet its far...far better than the laggy stock firmware