Hi
I am using usb tethering to connect pc via my android device.
I am wondering if there is a way to control the pc assigned IP address.
The IP assigned by tethering is conflicting with the subnet the PC already have from the NIC.
Related
I am trying to connect my HTC 3G Phone to my laptop.
I changed the port number for Remote Desktop by using regedit and change the port number in RDP-Tcp.
I have changed the port number to 5000.
I rebooted the computer.
When I try the setting on my PDA and I am on my home network, I use the computer name (HyderpotterAcer:5000) I get can not connect message.
Which IP address Do you put ie IP address to the home wifi router or the ip address to the computer?
Thanks
Mark
I did a ping from my PDA to the laptop and that worked.
if you're behind a router you can't give the IP of the computer as it's a LAN IP. open the port on your router forwarded to the specific computer IP you want to connect to and try again.
It does not work and I think I did port Forwarding right.
I am not sure if its the right forum to ask this question, but knowing the smart ppl we have here i hope i am wrong!
I just downloaded Remote RDP Enterprise 3.2 and i am trying to setup so i can connect to my home pc. I am using a router model WGT624 netgear router. I tried the port forwarding (had to setup custom PF, because it wouldnt let me add 3389 as a port on the services which offers through the router) as it was suggested but i think i might be doing something wrong because it just wont connect at all.
my PF on my router looks something like this:
# Service Name Start Port End Port Server IP Address
1 RDP 3389 3389 192.168.X.X
And when i goto whatismyip.com i have a different IP address: 67.234.x.x
on the app on my phone which IP address do i connect through?
Anyone use the same app and has a netgear router and knows how to set it up? or any documentation on how to get this thing working and can share it would be extremely helpful, its for my work!
Thanx so much in advance
Hi iknight8. I don't have that app but I'll try and help.
You need to connect to the external IP address (67.234.x.x) when you are on the internet and the internal IP (192.168.X.X) when you are on your internal network.
A good troubleshooting step would be to try connecting to you PC on the internal address when you are connected to your wifi. This should work with any of the port forwarding you have setup so if it doesn't then then you know it is a proble with the setting on the pc itself. Remote desktop has to be enabled in the computer settings and allowed on any firewalls you are using.
i tried connecting both but i get a Socket is not connected message!
if u can use it and let me know of the setting to make it work would be nice
Thanx again
p.s. wen i am on internal wifi network, same as pc and i put that PF ip addess, i get a mesage "no route to host"...
Do you have allowed RDP connection on PC?
I downloaded the app and the first time I tried it on my wifi I got the same error as you, no route to host. The problem was that I didn't enable remote desktop on my PC. Once I set it to allow connections from computers running any version of remote desktop it worked straight away.
This is what I did.
1. In the app, press the menu button and add.
2. I put in the IP address of my pc and port 3389.
3. On my PC I disabled the windows firewall.
4. Also on my PC (I'm using windows 7), I enabled remote desktop by going to start, right click computer, click properties, click remote settings and check the allow connections from computers running any version of resmote desktop radio button.
5. finally I connected my phone to my wifi and tapped on the connection I created in the app. It gave me my logon screen.
If you can get this working hopefully your port forwarding settings are corect and that will work too. Hope this helps.
I'm using CM9 on my galaxy nexus.
I can connect to my PPTP VPN server (my router running tomato) fine without tunneling, both inside my lan, and outside it.
I can connect to my SSH server (again my router), both inside my lan and outside it. And have successfuly forwarded ports before w/ connect bot and remote desktop apps.
But everything I try results in my VPN connection timing out when I try to do it over the SSH tunnel. I have it connecting to localhost on the VPN settings side. And on the connect bot side i am forwarding port 1723 to 192.168.1.1:1723 (which is my routers lan IP).... but it still times out.
Does anyone have any ideas? is this even possible?
Hello.
I need some help about my problem connecting to my work lan.
I have a PC in office connected to work LAN. I can connect to my pc from remote usign SSL VPN.
I have installed Junos Pulse on my Galaxy Note 10.1 and with it I can connect to my VPN and then, using port 3389, I can connect to my PC using RDC.
If I need to access my work network, I need to make some tunnel using port 3389.
I installed SSH server listening on port 3389 on my pc and, after VPN connection has been established, I try to use SSHtunnel to configure connection to my ssh server (working ok) and then starting Global Application routing. When I start SSH tunnel it connect to my ssh server and it works (for ex. using internet browser from android) but only using IP addresses.
If I try to use names instead of IP it is unable to resolve DNS, also if I set DNS option ON in SSHtunnel.
I cannot understand how to accomplish that kind of connection. I tried proxydroid, sshtunnel, autoproxy but they does not work (or I am not able to make them work).
I don't know if it is some problem using tunnelling with Junos pulse.....
Any help for me?
Thank you
No help?
Hi there,
I can connect my Windows 10 to the internet via USB Tethering, but my question is " Can I log all connection attempts via usb tethering?"
The purpose is to conduct a traffic analysis of my Windows via usb tethering, I want to log all the ip addresses that my Windows send/receive from.
Please don't suggest using DD-WRT, Fiddler or Wireshark; as my question is about "usb tethering ip logging".
I have:
Samsung Galaxy Note 3
Cyanogenmod 12.1 "rooted"
Windows 10 Home