Related
Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
galaxyhtc said:
Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
Click to expand...
Click to collapse
the otterbox's rubber on its case looked low grade compared to the seidios and case mates. it looked like what trident was using..
i was looking into the naztech but i didnt like how there is a bar on the top of the screen lol. id like to see a review on it. might get the case mate pop
If it helps your decision I had one otterbox which I had to have replaced thru otterbox due to silicone stretches and the phone will actually slide up and down in the case. had the replacement for about a month and just took off the second one today due to complaints of me sounding muffled and any back to the old dependable tpu case even though it is a ***** to get out my pocket and attracts lint it is my fave
Sent from my HTC Pyramid using xda premium
fireishott said:
If it helps your decision I had one otterbox which I had to have replaced thru otterbox due to silicone stretches and the phone will actually slide up and down in the case. had the replacement for about a month and just took off the second one today due to complaints of me sounding muffled and any back to the old dependable tpu case even though it is a ***** to get out my pocket and attracts lint it is my fave
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
yeah.. and if you watch the video reviews on it they didnt seem to pleased either lol. im dispointed in otterbox for this case.
Thanks for the info, i don't know though, was the otterbox easy to get in/out of your pocket.
galaxyhtc said:
Thanks for the info, i don't know though, was the otterbox easy to get in/out of your pocket.
Click to expand...
Click to collapse
Yeah it was super easy due to the hard plastic that covered the silicone layer that is one thin I miss about it and am still on the fence about putting it back on. I will say my phone survived a few high drops ( I am a cable tech and it fell from a ladder about 18 feet to concrete with out a scratch)
Sent From My HTC Sensation 4G powered by Sense-O-Matic
Wow, you just made my decision harder.... !!! Haha thanks though, i'm sure i can't go wrong with either of these cases, but I just want to know which is the best.
OK, I'm pretty sure that the Tough Case and Vertex are out:
Tough Case: I saw that the rubber wraps around the screen on the phone, and can attach lint, also, it does seem a bit bulky.
Vertex: Lack of information is difficult. From the pics I don't think it'll work out for me.
Personally I use zagg skins now. They are seriously epic. I have always hated all phone cases because of the bulk they add no matter how thin. But the zagg skins are tough...real tough. And add essentially no weight/thickness to the device. When I got mine i was trying to scratch the back and screen to no avail. zagg also offers a lifetime warranty, but I have no idea what their limits are on it. Plus you can customize it with any picture you want.
Just my opinion. Good luck with your choice.
I have both Case Mate POP and Otterbox Commuter... otterbox has far better plastic because it cant get scratched at all. The case mate pop looks like it's 10 years old after a week. Still I user POP rather than the otterbox because the rubber on otterbox is like a MAGNET for all the dirt that is around you. I used to clean the rubber, and put it in my pocket, and when I get it out it's entirely covered with dust... I don't even know what were they thinking when they were making it. Another thing about the otterbox is that the earphone jack cover never fits like it is supposed to.
I ordered this a week ago because it looks funny
http://www.case-mate.com/HTC-Sensat...-Sensation-Sensation-SE-Tut-Silicone-Case.asp
I will order the case mate tough also... I hope that will be what I want at last
Wow, thanks for the info! So which one of those has a thinner/less bulky form factor, and is easier to get in/out of your pocket?
Case
I bought a Yoobao case off of Ebay, I love it. It is very tough and thin holds the phone tight.
Ehh, thanks for the info, but I already have a TPU and while it is nice and slim, I want something with a little more protection.
I'll put my two cents in, I just got the vertex and I'm very impressed. I've had the commuter and didn't like it. The plastic seemed cheap to me and was too slick. I also had a tpu case that was ok but I didn't think it would protect very well and made the power difficult to press. The vertex is quality, looks and feels very nice and fits great.
Sent from my NookColor using xda premium
Hi, thanks for the input! Does the back material make it easy to get in & out of pockets easily? And also, is it thinner than your otterbox?
galaxyhtc said:
Hi everybody, this is my first post on these forums, although I have been reading them for over a year! Anyways, I was looking at buying a case for my Sensation that would keep it safe, but at the same time not adding to much bulk. I have narrowed it down to 4 cases, that I'm sure will all offer the level of protection I need, I am just wondering which one is the least bulky and slimmest.
Case-Mate Tough Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
Case-Mate Pop! Case
http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Otterbox Commuter
http://www.amazon.com/Otterbox-Comm...=UTF8&qid=1320160752&sr=8-1&tag=5336653508-20
Naztech Vertex
http://www.ebay.com/itm/BLACK-GRAY-...=300611783107&ps=63&clkid=5006598650185159423
I was looking at the Seidio with the kickstand, but I don't like all the exposed rubber as that would make it more lint-prone, and more difficult to get out of the pocket(one of my top pritorities).
Thanks in advance!!!
Click to expand...
Click to collapse
Haven't tried the Case Mates yet, nor the Seidio, BUT:
Naztech is a POS - crappy build, plain & simple.
Otterbox's silicone is too damn loose - quoting others here.
Just saying......
Well, I've been on these forums reading for about 5 months now, but this is my first post...
I've had the Casemate Tough Case for the same amount of time I've had my Sensation; about 5 months.
The tough case's hard backing makes it very easy to slip in and out of your pocket. The only exposed rubber is a small section at the top and bottom of the phone and a very thin rim around the screen, the rest is the hard plastic. I never notice that it's collecting lint\dirt, except when I remove the case, there is a small rim of dust collected under the rubber rim, but you can't see it until the case is off.
The exposed rubber parts always look clean and smooth, same goes for the hard plastic outer shell.
The farthest I've dropped my phone with the case on is off the bar... so maybe 4 feet or so? No damage to the phone or the case.
I haven't tried out any other smartphone cases, so I don't have a large frame of reference, but I haven't had a single issue with the tough case. Hope this helps!
master1454 said:
Haven't tried the Case Mates yet, nor the Seidio, BUT:
Naztech is a POS - crappy build, plain & simple.
Otterbox's silicone is too damn loose - quoting others here.
Just saying......
Click to expand...
Click to collapse
Have you actually tried the naztech case? I'm sitting here right now literally starting at it trying to find a problem with something and I can't. I can't compare it with the tough case but its better than the otter.
Like I said before, and I don't know if this even matters, the naztech has cut outs for all the holes on the back cover, none of the other two piece cases have that feature.
As far as the plastic, the naztech has a rubberized back which makes it easier to hold than the otter but still slides into a my pocket easy.
i think you guys should check momax case....
For what it's worth...
I picked up one of these on Amazon:
http://www.amazon.com/gp/product/B0055DHCKS/ref=oh_o00_s00_i00_details
Inexpensive, fits very well, easy to slip on and off, isn't a lint magnet, reminds me of the great Boxwave slip cover I had on my Nexus One.
Highly recommended.
Hey,
I just wanted to share something I've done to my S line TPU case I got from ebay. The regular glossy back of part of the case looked ugly and picked up fingerprints so I stuck some carbon fiber vinyl on it.
It's pretty cheap and a roll can be used for a lot of projects. I even covered my laptop.
I got mine here :http://www.amazon.com/Black-DI-NOC-Carbon-Fiber-CA-421/dp/B0062A4HE2/ref=sr_1_6?s=automotive&ie=UTF8&qid=1355796879&sr=1-6&keywords=carbon+fiber+vinyl+di+noc
If you want to try it here are the steps:
What you'll need:
- Scissors
- A roll of carbon fiber vinyl
- Hair dryer or heat gun
- a very sharp knife(I used an exacto knife) needed for fine details
1. cut out a piece of it making sure you give yourself at least an inch of extra material along the edges which you can trim down later.
2. Then line it up and stick it on and use a hairdryer to heat up the sides. This makes the material soft which allows you to stretch it over the corners and uneven areas.
3. Once you have everything lined up use the exacto knife to cut off the excess vinyl
4. Make some finishing details
5. you're done
Let me know what you think
WOW! i thought the s-line case was ugly as hell, but you sure did make something out of it! its very nice! kudos to you!
That looks awesome. Tried finding the Black 3M DI-NOC in Canada but it's proving either too expensive or hard to find locally. Too bad, would've loved to try that on the S-line I ordered.
You should sell this!
insomniac199 said:
That looks awesome. Tried finding the Black 3M DI-NOC in Canada but it's proving either too expensive or hard to find locally. Too bad, would've loved to try that on the S-line I ordered.
Click to expand...
Click to collapse
Any tint (wrap) shop should be able to get it, or already have it in stock. I guess that would be dependent on the size of your city however. No shortage of it in Calgary.
looks cool
Dude 10 outta 10 for originality. I'm off to order a roll myself. Many thanks
Sent from my GT-I9300 using Xparent ICS Tapatalk 2
Awesome idea!
I've got a big roll of that stuff somewhere that i bought to customise some motorcycle parts,
Looks like i've found another use for it now.
Really nicely done! You should sell your services! And you can do white carbon fiber as well with the frost S line case! LOL.
Seriously, the cf resembles the sparklies on the back of the phone as well, so very well done IMO. :good:
That turned out sick! I've done that with a few cases. That one looks like it would be to bad to do. Looks great
Sent from my Nexus 4 using xda premium
Here's a video showing how to stretch the vinyl properly if you also want to try this out:
http://www.youtube.com/watch?v=EMhvU8Dk3CE
Just make sure that you use a reallly sharp knife for a nice clean looking cut. If not, your results may not be clean looking.
Which case/film to use with official Samsung charging back?
It is thicker, and so far I can see nothing that will fit, can anyone shed some light on this please?
Looking to buy this:
http://www.ebay.co.uk/itm/171051427935?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
I used a Spigen Neo-hybrid (bulged) but fit fine, as well as a Tech 21 Impact shell case.
ponts said:
I used a Spigen Neo-hybrid (bulged) but fit fine, as well as a Tech 21 Impact shell case.
Click to expand...
Click to collapse
mate thats awesome news
can you post some pics with the neo hybrid please?
winwiz said:
mate thats awesome news
can you post some pics with the neo hybrid please?
Click to expand...
Click to collapse
I would but I sold it a few days ago when I went from two S4's down to one lol. I thought it looked good even with a hump out the back.
Has anyone tried the official Samsung wireless charging back cover with the UAG case?
ponts said:
I used a Spigen Neo-hybrid (bulged) but fit fine, as well as a Tech 21 Impact shell case.
Click to expand...
Click to collapse
I tried it bulged but it seems to effect the flash in pictures.
I tried out all the cases I could today at Best Buy with my S4 and S Charging battery cover, and NONE of them would work - they kind of started to go on, then would slide off on the long sides of the phone.... I was thinking about a Ghost Armor cover or cutting my own protective cover for it, debating on whether I will do it out of XPEL Invisible Paint Protection film (the stuff you use to protect the paint on cars) or 3M 1080 Carbon Fiber vinyl since there really isn't any other option, but I'm still not sure I want to do either one of those film options, here's why:
The clear bra paint protection film will make it stick in my pocket and add a ton of lint build up to the trimmed edges all the way around the battery cover, and the carbon fiber film (I have it in white and black currently) will change the texture of the back cover, something I preferred in the past but have become accustomed to since I bought my S4 and have used it without a case since launch day!
Let's keep this conversation going but not just with CASES, but film or other forms of protection in mind as well!
KryptosXLayer2 said:
I tried out all the cases I could today at Best Buy with my S4 and S Charging battery cover, and NONE of them would work - they kind of started to go on, then would slide off on the long sides of the phone.... I was thinking about a Ghost Armor cover or cutting my own protective cover for it, debating on whether I will do it out of XPEL Invisible Paint Protection film (the stuff you use to protect the paint on cars) or 3M 1080 Carbon Fiber vinyl since there really isn't any other option, but I'm still not sure I want to do either one of those film options, here's why:
The clear bra paint protection film will make it stick in my pocket and add a ton of lint build up to the trimmed edges all the way around the battery cover, and the carbon fiber film (I have it in white and black currently) will change the texture of the back cover, something I preferred in the past but have become accustomed to since I bought my S4 and have used it without a case since launch day!
Let's keep this conversation going but not just with CASES, but film or other forms of protection in mind as well!
Click to expand...
Click to collapse
So far it appears the the Diztronic TPU case fits.
I'll be getting mine today (the charge that is) so will try with the Neo Hybrid SGP case and ill post some pics
I have both the diztronic and neo hybrid case, and only the diztronic works well.
Sent from my SGH-M919 using xda premium
So as everyone else in this forum, we all like the design and feel of the new HTC... Im an adict for feeling the metal in my hands and keeping the device as sleek as possible...
I have the silver grey edition, was wondering how sensitive is the phone to scratches if i decide on not wearing a case...
each time I put the phone nakud on a table of some sort, I hear that terrible metal sound scratching the surface of the table...
Am I just having a bad OCD or in the long run i will start seeing some heavy blemishes on the phone's body ?
Moved to Q&A
ransz said:
So as everyone else in this forum, we all like the design and feel of the new HTC... Im an adict for feeling the metal in my hands and keeping the device as sleek as possible...
I have the silver grey edition, was wondering how sensitive is the phone to scratches if i decide on not wearing a case...
each time I put the phone nakud on a table of some sort, I hear that terrible metal sound scratching the surface of the table...
Am I just having a bad OCD or in the long run i will start seeing some heavy blemishes on the phone's body ?
Click to expand...
Click to collapse
It's aluminum - a pretty soft metal; there probably will be scratches after a time, its just inevitable. But the finish is pretty strong. I've had mine for about 2 weeks and only have one barely noticeable scratch and I'm pretty rough on phones. I'd recommend one eventually. Maybe get a skin if you don't want to add to the bulk.
orangekid said:
Moved to Q&A
Click to expand...
Click to collapse
I had the M7 for a year, and never put a screen protector or body case/skin on it. I used the Seidio Spring Clip Holster for it, and there is just one, barely perceptible, dent in the back.You have to hold it JUST right in low light to even see it. No scratches, and I've even dropped it on the sidewalk (which left a teeny-tiny nick in the beveled edge, again you have to bee looking really hard to see it.)
I have the Spring Clip Holster on order for my just received M8, I plan on running it caseless/skinless as well. I have the dark grey version, and I just can't bear to cover this pretty thing up.
Admittedly, I'm not hard on devices. Were I to take it out in rough conditions (say, camping/hunting/shooting/hiking), I'd probably use a leather belt clip case. As it is, I work in an office. My husband used the Seidio Surface case and holster on his M7, and I have the Seidio Dilex case on the way for his new M8.
If you're a pocket carrier, though, I'd think long and hard about what you tend to keep in the pocket with it. Keys, loose change, pocket knife - no-go. Skin it, or change the way you carry it.
edit: Ok, this thing looks pretty damn tough: https://www.youtube.com/watch?v=-fzr7ULAiEk and https://www.youtube.com/watch?v=lhwvXTVQoPM
You tempt me to go caseless with the htc...
I noticed from videos that the gun metal version is more vaunrable the scratches and small cracks if the device hits the groud.. im guessing its due to the color of the handset...
Decisions decisions...
ransz said:
You tempt me to go caseless with the htc...
I noticed from videos that the gun metal version is more vaunrable the scratches and small cracks if the device hits the groud.. im guessing its due to the color of the handset...
Decisions decisions...
Click to expand...
Click to collapse
Mine is gunmetal, and will be caseless carried in a holster. My husband's is silver, and will be cased in a holster.If I do end up scratching it, I'll probably get a skin for it, like this one: http://www.slickwraps.com/HTC-One-M8-Brushed-Onyx-p/sw-one8-onyx.htm
Like all materials, it will scratch if brushed against something harder than it is. Aluminium is not the strongest of metals and is more easily scratched. Mine has some small scratches on the edges where my car mount holds it. I've since added some felt to the mount to prevent any more marks. In the grand scheme of things they're nothing and I'm sure it will get more as I use it. I feel the phone looks worse with a case of some sort stuck on it than it would with a few superficial scratches. I did get a case for when I know I'll be using it in a more active environment but most of the time I go without a case.
Wasted Money
Spent $25 on a Spigen slim armor case for my wife M8 and three days later she stops using it. Thinking of getting a temper glass screen protector.
Gahar said:
Spent $25 on a Spigen slim armor case for my wife M8 and three days later she stops using it. Thinking of getting a temper glass screen protector.
Click to expand...
Click to collapse
Why did she quit using it?
I love my Slim Armor. It is slim and keeps the design aesthetics of the phone. My grip on the phone is better. A picture is below for those that haven't seen the cases. And they come in different colors that mirror the phone if you want.
I only went a few days without a case and dicked up my gun metal gray phone on two corners with a small drop onto concrete. My case arrived the next day. It still pisses me off.
85gallon said:
Why did she quit using it?
I love my Slim Armor. It is slim and keeps the design aesthetics of the phone. Picture below for those that haven't seen the cases.
I only went a few days without a case and dicked up my gun metal gray phone on two corners with a small drop onto concrete.
Click to expand...
Click to collapse
She loves the phone but she said the case makes the phone taller. I don't want her to drop the phone because all it takes is one drop. I was thinking of putting a temper glass protector.
I have a fairly large scratch on the rear aluminum on my HTC One M8. I believe it got scratched from my retractable badge lanyard clip as I attach it on to my left pocket where my phone resides. It probably rubbed against the clip, introducing the scratch :/
FWIW, This is my first aluminum unibody phone. All of my past phones (EVO, EVO-3D, SGS3, SGS4) never had a single scratch and never had any protection (cases or screenguards) and still look mint. All of them were plastic however.
myn said:
I have a fairly large scratch on the rear aluminum on my HTC One M8. I believe it got scratched from my retractable badge lanyard clip as I attach it on to my left pocket where my phone resides. It probably rubbed against the clip, introducing the scratch :/
FWIW, This is my first aluminum unibody phone. All of my past phones (EVO, EVO-3D, SGS3, SGS4) never had a single scratch and never had any protection (cases or screenguards) and still look mint. All of them were plastic however.
Click to expand...
Click to collapse
surprisingly I went and bought the cheap orignal HTC case that comes with some of the HTC's retailers, its pretty good... i mean its not like otterbox protection or spigen... but it keeps the case very slim and gives u a very good grip in the hand.
ransz said:
So as everyone else in this forum, we all like the design and feel of the new HTC... Im an adict for feeling the metal in my hands and keeping the device as sleek as possible...
I have the silver grey edition, was wondering how sensitive is the phone to scratches if i decide on not wearing a case...
each time I put the phone nakud on a table of some sort, I hear that terrible metal sound scratching the surface of the table...
Am I just having a bad OCD or in the long run i will start seeing some heavy blemishes on the phone's body ?
Click to expand...
Click to collapse
I always dress my phone with good cases. Same as you, I don't want seeing my phone having scratches, dents and blemishes in the future.
case-mate barely there case is great for minimal, the aluminum was too slipery for myself.
This has a nice matte finish to it and add practically no bulk, won't do a whole lot in terms of protection against large drops/bumps, but for small scratches to the back and sides this is great.
I didn't want to put my M8 in a case, but that thing felt like a wet bar of soap in my hand. So I went with this case so I could still see that beautiful brushed aluminum.
Sent from my Nexus 7 using Tapatalk
Always use hard case. It'll prevent your phone from scratches and all. For sweaty hands. And in case it fell, you have an extra protection. That's why I keep my phone with case all the time.
Hey,
I'm curious what is your prefered protection. I'm currently using a case but I'm thinking about switching to a skin, maybe dbrand or a real wood one.
What do you use?
flopower1996 said:
Hey,
I'm curious what is your prefered protection. I'm currently using a case but I'm thinking about switching to a skin, maybe dbrand or a real wood one.
What do you use?
Click to expand...
Click to collapse
Thisphone is hard to hold naked so I run a case, ringke is my current daily. I'd love to run a skin but they simply aren't attractive with seems, plus I like being able to toss my phone around.
Have you seen the cruzerlite bugdroid cases? I have a red and a black one. However, due to the nature of the material in the semi opaque red one, it is more flexible and does not fit as well as the black one. So the black one stays on permanently.
zakiwashi said:
Have you seen the cruzerlite bugdroid cases? I have a red and a black one. However, due to the nature of the material in the semi opaque red one, it is more flexible and does not fit as well as the black one. So the black one stays on permanently.
Click to expand...
Click to collapse
Yeah I've seen them. They look not bad.
Currently using a silicon case, but planning on using skin sometime soon. Really want to feel the Z5C touch without any hindrance. Love the frosted glass finish on the back.
I wish there was a Diztronic TPU case for it. I've been using their brand for my previous Moto X, Nexus 6 and 5x and they're the best I've had so far. Minimalistic, durable and protective. Anyways for now I'm using a Orzly Semi transparent TPU case bought from Amazon, it's fairly decent compared to what's available, i wouldn't consider a skin on this device.
Sent from my E5823 using Tapatalk
I've been using the DevilCase aluminum bumper with a tempered glass protector. So far it's held up to all the drops and smacks I've given it. The bumper is visible worn and scratched but the phone itself still looks new.
I use a generic transparent silicone case that covers and provide a front raise.d protection the phone is slippery as hell without a case. I've dropped it several times getting inside and outside of the car during the first 2 months. It got some heavy scratches on the corners and also on the back from slipping it in and out of my front jean pockets. It loses some of it's appeal with the case but then again; I got a much better grip now and I can just drop it instead of 'gently' placing it on the table; and I do this like 100x a day.
pavlpavel said:
I've been using the DevilCase aluminum bumper with a tempered glass protector. So far it's held up to all the drops and smacks I've given it. The bumper is visible worn and scratched but the phone itself still looks new.
Click to expand...
Click to collapse
This is a really expencive case right?
flopower1996 said:
This is a really expencive case right?
Click to expand...
Click to collapse
It's around $50, not the most expensive of cases but more than the standard TPU and silicone ones.
I've used them on my last three phones and have always been happy with them. Their customer service is also tremendous.
Using a Ringke case for now. It came with a screen protector, but i'm not using it.
pavlpavel said:
It's around $50, not the most expensive of cases but more than the standard TPU and silicone ones.
I've used them on my last three phones and have always been happy with them. Their customer service is also tremendous.
Click to expand...
Click to collapse
Ah ok, I'm rocking an orzly case. Not bad either....
I always use TPU cases with my phones. I wish I didn't have to use a case, but your phone WILL eventually fall and hit the ground at some point, so you need protection. I prefer TPU because it's the perfect balance between polycarbonate and silicone. It is hard enough to feel robust and not stick to your pockets (pulling everything up along with your phone), and feels soft enough to absorb impacts. NEVER had a phone crack or dent with one of these. And they fall from hip height from time to time when I get out of the car. I dunno, some part of this is luck, but I trust these cases. They're simple, dirt cheap and efficient.
In addition to a glass scree protector on the front, I use a dbrand sticker on the back to increase grip and protect the glass from breaking or getting scratched.
Ringke Fusion for all my devices. Best protection, small footprint. Never looked back.
MatMew said:
Ringke Fusion for all my devices. Best protection, small footprint. Never looked back.
Click to expand...
Click to collapse
Ringke Fusion seems quite popular
interesting
Redneck Tetron. Dual layer protection and stand. I'm very satisfied.
I'm simply using a TPU cover bought for 5 euro and saved my phone already 3 times. It's perfectly fitting the size and doesn't add extra weight or size to the phone itself.
I'm using it combined with a tempered glass.
FYI something like this: https://i.ytimg.com/vi/9CSjnj2gSms/maxresdefault.jpg
Only orzly
ALL users of z5 tried few china tpu cases, but that one is awesome, I recommend 100%, phone looks elegant and like without case ( with dark version). Moreover, it's matt and really nice in touch :good::good::good: youtube.com/ watch?v=GtxgfKDej-E im not a producer, just happy user
I agree, I'd use the phone naked but its too slippary. All I really want is a bumper but no one has any.
Therefore, I just got a black TPU case and cut out the back to make it into a bumper. The cut could have been cleaner but its been working for me.