I'm currently running eagles blood 2.3.5 custom rom and my data is wacky. Mostly my data will say 1x which is cdma technology, which I usually get decent speeds with. But now I get H appearing which is HSPA. Is there anyway to keep just the hspa. Apps like Netflix don't work on CDMA and its very annoying. So what's the deal? Is my data wacky or do I need to change my preferred network? It's currently set to WCDMA preferred.
Sent from my LG-P999 using XDA App
I think you mean GSM, not CDMA.
Go to your Settings, Wireless Networks, Mobile Networks, Network Mode, and change it from GSM/WCDMA to WCDMA only. Now if you are anywhere where there is a 3G/4G signal, you will get it instead of the phone switching to a higher 2G signal automatically. However if you are in a 2G area, you will need to switch back to GSM/WCDMA.
no hes right its cdma technology, i think it might be simple, if u go into ur access point simple is probably checked off u need it to be tmobile and hit search networks even if it says error keep doing it until u get the option to choose tmobile , same thing was happening to me on fauxs rom lol i think verizon uses that too it looks like this rite....1X
Iwent into the access point settings and its checked off with T-Mobile. No dice, still switching back and forth. I also live in an aera that has hspa+. Its weird because on my old mytouch slide it was able to just use the hspa network no problem. With this switching its severely draining my battery. People said they can get 24hrs with there phone on this rom, I got 6 today. Thanks for the replies guys, I really appreciate it.
UPDATE: Wi-fi calling works fine which is confusing that I'm still getting 1x when my network settings are all set to t-mobile
Sent from my LG-P999 using XDA App
So i downloaded Elixir and heres the deal:
Eaglesblood:
1X uses CDMA
E uses GSM
H uses HSPA
Stock:
2g uses GSM
4g uses HSDPA
is there anyway to fix the eaglesblood rom so it uses just the 2 like stock does?
Related
I am having an issue locking the phone to WCDMA. I live an area where the EDGE signal is stronger and it constantly drops 3G. After rooting the phone, I locked it into WCDMA and it would stick all the time, even dropping all signal when I moved into an area with only GSM coverage. However, somewhere along the line, I've lost the abillity to lock it in. I have tried going into the Mobile Networks settings and selecting WCDMA Only and also doing the *#*#4636#*#* and neither one will lock it into WCDMA. Anyone else having this issue or know of a workaround for this?
If ur in a edge based area where 3g is minimal,then setting to wcdma is the worst way to go. Wcdma will lock u into 3g/4g signals ONLY! So if your in edge area only,wcdma will not give u data or signal due to the fact the phone is searching for 3g/4g signals only. And GSM or cdma is a different ball park. Set to wcdma preferred and let it pick up what it can. If a 3g or "4g" signal is avaliable,it will automatically detect it and connect.
Sent from my HTC Inspire 4G using XDA App
mattmiller said:
If ur in a edge based area where 3g is minimal,then setting to wcdma is the worst way to go. Wcdma will lock u into 3g/4g signals ONLY! So if your in edge area only,wcdma will not give u data or signal due to the fact the phone is searching for 3g/4g signals only. And GSM or cdma is a different ball park. Set to wcdma preferred and let it pick up what it can. If a 3g or "4g" signal is avaliable,it will automatically detect it and connect.
Sent from my HTC Inspire 4G using XDA App
Click to expand...
Click to collapse
Its not that I don't have 3G in my area, its just that it only gives me 3 bars as opposed to EDGE which will give me full signal. When it's set on wcdma preferred, it will connect to 3G and after a few minutes switch over to EDGE. With my Captivate and the Inspire when I first got it and before I rooted it, I was able to lock it into only 3G. Somehow after flashing basically every rom in this forum, I can't get that setting to stick anymore.
Ok then flash the ruu of the rooted stock inspire. It is a pd98img.zip u can load and flash via bootloader. It will stay s-off and will flash updated radio and patches. Get your data fixed and GPS and then flash a rom afterwards. Attn1 has it posted in the development.
Sent from my HTC Inspire 4G using XDA App
Rob_Wing said:
Its not that I don't have 3G in my area, its just that it only gives me 3 bars as opposed to EDGE which will give me full signal. When it's set on wcdma preferred, it will connect to 3G and after a few minutes switch over to EDGE. With my Captivate and the Inspire when I first got it and before I rooted it, I was able to lock it into only 3G. Somehow after flashing basically every rom in this forum, I can't get that setting to stick anymore.
Click to expand...
Click to collapse
Same issue here, I called AT&T and they said it's because the cell tower closest to my office is old and supports Edge only so my phone keeps attaching to that tower even though there are other towers in range (that will give me 3 bars of 3G) which are newer.
With the stock rom, even going into the testing menu and setting "WCDMA only", it kept me on the Edge network. I rooted and flashed a custom ROM (Android Revolution) and at first it was great. At the office I could force "WCDMA only" at my desk, when I went into the middle of the building or whatever I would just have no signal (which I was ok with).
Now with the newer versions of the ROM I could no longer force "WCDMA only"... And the OP basically ignores my questions when I ask. Something that worked fine, I flashed a new version of the ROM and it stopped working...doesn't take a genius to figure out it's probably something he changed in his ROM... Not to sound unappreciative of the developers here...they do great work. Just frustrating... >_<
is there any way that you can disable 3g mobile data while keeping on the 4g data(like you can with the evo 4g)?
the reason i ask is this... i use my phone to tether to the computer in my room, and it seems that i get a weak 4g signal there, so its constantly going back and forth between 4g and 3g. I'd prefer to keep the phone only on a 4g signal, even if weaker. is there a way to do this ?
Try the app lte onoff from the market. I believe there's an option for lte only.
Which selection would it be? thanks in advance
Sent from my SCH-I510 using XDA App
I need this too.
On the thunderbolt if you used one of those phone info apps you had the options for CDMA only, CDMA/LTE auto and LTE only.
I have to use LTE only when I want to tether in my office because if I leave it on auto my phone will constantly switch between 4 and 3g and it rapes my battery.
If you use those same apps on the charge they show a bunch of gsm options and wcdma and such. Far as I can tell none of them do anything either. The built in options on the phone allow you to use CDMA only or CDMA/LTE auto but not LTE only. Definitely hope someone can work up a fix soon as it's a key issue for me (I own two tablets that I like to tether).
Hello All,
I'm on the WIND mobile network and I'm trying to prevent my MyTouch 4G Slide from roaming on Rogers. I'm running pyr-o-ice 1.12 desensed, and I can't figure out how to get the WCDMA only mode to stick.
I only recall one ROM (don't recall which one) being able to set WCDMA only as persistent, and this one doesn't seem able to. I've read that there is an app available on the market, but I'm wondering if there's any way to do this straight through Android. *#*#4636#*#* menu settings are NOT persistent. Even without rebooting, the phone will switch to WCDMA preferred even after I have set WCDMA only mode.
Does anyone have a persistent solution on ROM-agnostic Android? I don't mind editing files through adb. Thanks!
It may be a glitch in the ROM. I have the stock Rom and run WCDMA Only mode all the time. T-Mobile's 2G at my work is terrible so I just use WiFi or WCDMA.
Sent from my unrooted, stock, Black myTouch 4G Slide using XDA Premium App.
I have full bars on both 2G and 4G, but the 4G is slooooooow... Anyone know why? Sometimes 2G is faster... The phone on 4G just seems to keep downloading "something" but doesnt show much... And takes forever to load. So i have to use wifi but when i am out id like to use 4G... Thanks
Sent from my myTouch_4G_Slide using XDA
4g in your area can just be borked....
Have you tried Toggle2G? (You need to flash the ...update.zip)
Stefan
Herro! first time poster, long time lurker! i searched around, and couldn't really find a similar problem.
I got an HTC one S from Fido, unlocked it, and i've been trying to use it on Bell. I tried several different APN's until one finally worked...but only EDGE speeds! It's also draining my battery extremely quickly. also, when i put my bell sim card inside, preferred network mode changes to WCDMA instead of HSPA (like on the fido sim).
why is this happening? i was told a fido phone would work on bell with no problem. why no 4g speeds?
thank you and i appreciate the responses in advance
HSPA uses WCDMA, so that makes no sense... Under preferred network you should have WCDMA only, 2G only, or WCDMA preferred if I recall correctly as I'm not on stock HTC rom atm so can't check. Are you getting an "E" signal indicator or are you just getting a slow connection? What does it say under About phone>Status>Mobile Network Type?
Set it to Auto mode in the network settings.
frdd said:
HSPA uses WCDMA, so that makes no sense... Under preferred network you should have WCDMA only, 2G only, or WCDMA preferred if I recall correctly as I'm not on stock HTC rom atm so can't check. Are you getting an "E" signal indicator or are you just getting a slow connection? What does it say under About phone>Status>Mobile Network Type?
Click to expand...
Click to collapse
yeah, all the tech support i've talked to said it makes no sense either . i get the same outcome whether i put it on WCDMA only or GSM/WCDMA auto. when i do the speed test, it always comes out under 1 mb/s. it actually has the 4G symbol up, but the speed isn't there.
mhmm, it switches between UMTS and HSDPA.
If you have UMTS and HSPDA under status its working, and those are also what connection you're really on. If you always have a 4g icon on status bar it seems like your carrier has modded the software like T-Mobile USA does so it always shows 4g no matter what's up in the real world.
Maybe you're not in a good location and that's why you get slow data. Also I have no idea how Canadian carriers work but I'd guess if you're connected to a 850 MHz cell you'll get worse speeds than on a 1700/1900 one. Don't you guys have insane data caps everywhere, perhaps you hit yours when speedtesting?
did you try a new sim from bell
I bought one of these phones, rooted it, unlocked it, and installed CM9. I love the phone and OS, but I cannot get the 3G/4G to work on AT&T. Any ideas?
Yeah. The data network is incompatible. Different frequency.
Sent from my SGH-T769 using xda premium
Yeah I think all you can get is 2G (edge) on AT&T with the blaze.
I can say from first hand experience that the blaze works great with AT&T's 3g service. I bought this phone last week, unlocked it, and swapped in the sim from my old Aria and have been using it with CM10 ever since. Data speeds are around 3 to 6 Mb/s down and 1 Mb/s up, and voice and text messaging works fine.
For a more technical answer, AT&T uses the 850 mhz and 1900 mhz frequencies for UMTS (3g), and T-mobile uses 1700 mhz and 2100 mhz frequencies. The blaze supports UMTS on all of these frequencies so there are no technical roadblocks to using this phone with AT&T. http://www.phonearena.com/phones/Samsung-Galaxy-S-Blaze-4G_id6824
As for your problem of not getting 3g working, I had similar issues when first switching the sim card (especially on the stock rom). Check that your APN matches the one your old phone was using. On the stock rom, the phone did not auto detect the correct APN and this caused the 3g to not work. CM10 detected the correct APN right away though. Also, try turning data off and on or even rebooting the phone once you've checked your network settings.
I sold my other phone and no longer have it. Please confirm your APN settings, and how do I change them?
The blaze has all the frequencies necessary for it to do HSPA (3G/4G) on AT&T's networks.
You'll likely want to change the APN. On CM9/10, go to Settings -> Wireless & Networks + More... -> Mobile Network Settings -> Access Point Names.
I was careful in selecting this specific phone because of its compatibility with AT&T HSPA bands. I have tried the suggested tweaks to the APN settings within both CM9 and CM10, but I still get no visual notification that the phone is operating in 3G or 4G mode. The areas in which I have used the phone consistently provided 3G and/or 4G coverage consistently with my prior BlackBerry 9860.
Any additional tips/tricks would certainly be appreciated. I know this phone is capable of so much more than it's providing me at this point.
nellans57 said:
I was careful in selecting this specific phone because of its compatibility with AT&T HSPA bands. I have tried the suggested tweaks to the APN settings within both CM9 and CM10, but I still get no visual notification that the phone is operating in 3G or 4G mode. The areas in which I have used the phone consistently provided 3G and/or 4G coverage consistently with my prior BlackBerry 9860.
Any additional tips/tricks would certainly be appreciated. I know this phone is capable of so much more than it's providing me at this point.
Click to expand...
Click to collapse
have you tried running a speed test to see if maybe it's just that the icon isn't coming up?
That is why it was called the "Merger Proof Phone"