hi all
i want to change my TF ROm into prime 1.7 but they say i must install clockworkmod recovery , i have install room manager and when i want to verify my tablet
there is'nt asus transformer in the list
any one have a solution with that ?
tq
Sounds like you have not rooted your TF yet. Check the Dev forum for the method that feels best for you and have at it. Then install the custom CWM posted in there also.
That'll get you rolling.
skeeterpro said:
Sounds like you have not rooted your TF yet. Check the Dev forum for the method that feels best for you and have at it. Then install the custom CWM posted in there also.
That'll get you rolling.
Click to expand...
Click to collapse
i 've root my TF
and i still dont see TF on the list ==
That's odd. When I rooted CWM was installed along side.
Have you tried to reboot into Recovery? (Reboot holding down the Power button and pressing Down on the Volume button. Then when the Recovery message pops on in the upper right corner....quickly press Volume up). You must be quick with that.
skeeterpro said:
That's odd. When I rooted CWM was installed along side.
Have you tried to reboot into Recovery? (Reboot holding down the Power button and pressing Down on the Volume button. Then when the Recovery message pops on in the upper right corner....quickly press Volume up). You must be quick with that.
Click to expand...
Click to collapse
or i think because i root it with nvflash ?
because now i use prime 1.4
ok i'll try it
===================================
sloved !!!!
but why now i can't mount my sd card ?
they say "Error mounting /sdcard "
You need to make sure your uSD is formatted correctly. This error is not uncommon. Windows and CWM often cannot format correctly (uSD).
Use this: https://www.sdcard.org/consumers/formatter_3/
ROM Manager is NOT compatible with the Transformer.
Depending of your method of root, a version of CWM usually get install with it.
skeeterpro said:
You need to make sure your uSD is formatted correctly. This error is not uncommon. Windows and CWM often cannot format correctly (uSD).
Use this:
And how should one be going about using this exactly? Should I assume that if one is running the usual flavours of Windows Fail that they would just download and install, it will auto detect the internal sdcard and microsd card where applicable, give you a drop down list of which one you want to format and have at 'er?
This was a issue for me after running the Asus Transformer root kit v7.1 and i managed to use nvflash and apply revolver rom and confirmed cwm as working but same storry with mounting sdcard. Please advice.
Regards.
Click to expand...
Click to collapse
deadmatrix said:
And how should one be going about using this exactly? Should I assume that if one is running the usual flavours of Windows Fail that they would just download and install, it will auto detect the internal sdcard and microsd card where applicable, give you a drop down list of which one you want to format and have at 'er?
This was a issue for me after running the Asus Transformer root kit v7.1 and i managed to use nvflash and apply revolver rom and confirmed cwm as working but same storry with mounting sdcard. Please advice.
Regards.
Click to expand...
Click to collapse
Take your micro sd card out, put it in a card reader and plug into your PC via usb port. Run the sd formatter program to format your micro sd card (save anything you don't want to lose first).
Related
hi everyone,
i have a g1 that was given to me a while back already rooted
recently it gave me problems and i had to restore it.....
after doing the restore it wouldnt boot up so i started playing with it....
i erased the sd card (by mistake)
and now the phone doesnt get passed the "tmobile g1" screen someone please help
thanks in advanced
download another rom and flash it, make sure you have the required partitions ie; Fat32, EXT4, LinuxSwap
can you still get into recover mode? power on the phone by pressing and holding the Home + Power button.
Let me know what you see.
civickrazy78 said:
hi everyone,
i have a g1 that was given to me a while back already rooted
recently it gave me problems and i had to restore it.....
after doing the restore it wouldnt boot up so i started playing with it....
i erased the sd card (by mistake)
and now the phone doesnt get passed the "tmobile g1" screen someone please help
thanks in advanced
Click to expand...
Click to collapse
Trying holding home after restarting - into recovery
Select Partition Card and follow the clicks.
Load a Rom onto the card using the MS Toggle
Flash a Zip from card
this might get better replies in the QA section.
Can I run this on Sapphire? Whens the next release date?
he3 said:
Trying holding home after restarting - into recovery
Select Partition Card and follow the clicks.
Load a Rom onto the card using the MS Toggle
Flash a Zip from card
this might get better replies in the QA section.
Can I run this on Sapphire? Whens the next release date?
Click to expand...
Click to collapse
well, if it was a "while back" they probably don't have MS toggle ( mass storage, i.e mount sd over usb )
@OP
just get the rom onto your sdcard, power off phone, remove sdcard, put in adaptor , then in to your pc's card reader.
you will also want to upgrade recovery
RA1.7.0 is probably your best bet
link in my sig
Firerat said:
well, if it was a "while back" they probably don't have MS toggle ( mass storage, i.e mount sd over usb )
@OP
just get the rom onto your sdcard, power off phone, remove sdcard, put in adaptor , then in to your pc's card reader.
you will also want to upgrade recovery
RA1.7.0 is probably your best bet
link in my sig
Click to expand...
Click to collapse
are you sure RA 1.7.0 is the best in this situation? i remember having the recovery dissapear issue with it in the begining. although firerat is great and knowledgable.
Firerat said:
@OP
just get the rom onto your sdcard, power off phone, remove sdcard, put in adaptor , then in to your pc's card reader.
Click to expand...
Click to collapse
Totally true FR.
Dont worry OP, Im bilingual in British :
To get the rom onto your sd card:
Power off phone, remove sd card and use an adapter to get a rom on.
This method can be used if your recovery does not support MS.
Bzerk1 said:
are you sure RA 1.7.0 is the best in this situation? i remember having the recovery dissapear issue with it in the begining. although firerat is great and knowledgable.
Click to expand...
Click to collapse
thats because you flashed it from cm5, nothing wrong with the recovery
issue is CM5+'s kernels
Since they can't boot to ROM the instructions on Amon_RA's page are perfect.
clockwork recovery's page does not give any detail on how to flash, infact it recommends you do it via ROM Manger, which can get you stuck for a bit
PS you can use Amon_RA's instructions to install Clockwork
I'm warming to clockwork, but it has some things I just don't like
No console ((((
No flash/action confirmation, ( trackball is not great, you sometimes slip up or down when pressing ... grrrr )
Got a bit of a problem folks,, hope to get some help...
i have been running TNT lite since i got the tab and was up to 4.1 and started getting the acore force closes. so i followed some threads and installed clockwork and did the partition reformate and wipe data,,,,
now when i reboot, it gets the birds splash, and moves to the G-tablet boot image (i have the dancing droid one) and it hangs,,,,,,, nothing....
any ideal how i "fix this"...
thanks for any help because as you can see i am at a stop!
jake
I had some issues with my first tab similar to what you are having. The only way I solved it was by reflashing and wiping all date, which takes you back to the EULA. Good luck.
Do you have functional recovery? I'm guessing yes since you partitioned. Go to recovery and flash the rom again. You can mount the usb drivers in cwm to start usb mass storage so that you can download the rom on your computer and transfer to tablet. You can also put rom on external sd card and install from cwm.
When you partitioned the storage you deleted everything including the os. I believe it warned you of that before you did it.
If no recovery then you will have to nvflash. Search nvflash and bekit to get the nvflash info.
Matt
Make sure you are using bekits .8 CWM release. The latest release of CWM gave me fits, the only thing that would install was CM 7.
This isn't an Android Development topic, its a General topic, but don't worry about it, a mod will move it.
As to the question, like the others said. Use CWM .08, Wipe System, Wipe Cache, Install zip from SD Card, Install your choice of ROM (in your case, TnT Lite 4.1), Install gApps.zip, Reboot system now. That should get you up and running.
I am confused about you saying that you just now installed CWM but have been running TnT Lite. How would you have done that or do you mean you tried to update CWM or do you mean you have been using the stock TnT?
Also, feel free to hop on the #Tegratab IRC on Freenode if you need fast troubleshooting. Someone is usually on there to help
jasco13 said:
Do you have functional recovery? I'm guessing yes since you partitioned. Go to recovery and flash the rom again. You can mount the usb drivers in cwm to start usb mass storage so that you can download the rom on your computer and transfer to tablet. You can also put rom on external sd card and install from cwm.
When you partitioned the storage you deleted everything including the os. I believe it warned you of that before you did it.
If no recovery then you will have to nvflash. Search nvflash and bekit to get the nvflash info.
Matt
Click to expand...
Click to collapse
I "think" i tried this last night. I have 4.1.4 Update.zip and recovery folder on an USB stick. In CW, i went to "mount USB" (thinking i could access my USB and install from there) but ???? i didnt see anything and the only options were install update.zip from SD, and from Location but no USB option, and of course no way (that i saw) to brows to another location to "pick" where i wanted to install from.
Im thinking i am missing something with this step, or just plain old doing it wrong..
TheJesus said:
This isn't an Android Development topic, its a General topic, but don't worry about it, a mod will move it.
As to the question, like the others said. Use CWM .08, Wipe System, Wipe Cache, Install zip from SD Card, Install your choice of ROM (in your case, TnT Lite 4.1), Install gApps.zip, Reboot system now. That should get you up and running.
I am confused about you saying that you just now installed CWM but have been running TnT Lite. How would you have done that or do you mean you tried to update CWM or do you mean you have been using the stock TnT?
Also, feel free to hop on the #Tegratab IRC on Freenode if you need fast troubleshooting. Someone is usually on there to help
Click to expand...
Click to collapse
I have been installing the Roms, by downloading, taking the two "files" and moving them to my tab, and then rebooting with the power volume up,, ,finds the update and installs the ROM. its worked for all of them since 2.2...i thought i read that was an acceptable means of installing the ROM.????
as far as getting the files onto my SD (now). How? my computer doesnt see the tab because it is just hanging on dancing andy(unless there is anothe way of making it "see it", i cant seem to figure out how to get CW to read from my USB drive.....
Im just plain "stuck".
I am by no means a Android guru, and up to this point havnt had problems in the past... I TRULY am thankful for ANY help and all help i have recieved...
thanks folks
Jake
power off the tablet.
hold vol+ then power till u see recovery key pressed in the upper left corner of the screen. it will appear while the birds are still on the screen. If you get to the g tablet screen power off and repeat till u get into cw recovery.
Using volume +/- to navigate up and down Home to select and back to go back one level
Navigate cw recovery till u see mount usb storage i think its under partitions.
when you see usb mounted hook up the usb cable to the computer to the tablet mini usb port. copy the rom of your choice to the tablet. u only need the update.zip
once copied unmount usb storage.
back out till u see apply update.zip
Install and reboot u will be good to go.
of course flash gapps if u know what that is and want market on the tab.
Enjoy.
jakehale said:
i cant seem to figure out how to get CW to read from my USB drive.....
Click to expand...
Click to collapse
CW Won't read your USB drive. The "Mount USB" option in CW is to mount your tablet onto your computer as a USB storage device. By doing so, you can push files over to the tablet's internal storage from your computer.
BigJohn
BigJohn89 said:
CW Won't read your USB drive. The "Mount USB" option in CW is to mount your tablet onto your computer as a USB storage device. By doing so, you can push files over to the tablet's internal storage from your computer.
BigJohn
Click to expand...
Click to collapse
Agree. That is what I was talking about earlier, I just couldn't remember what it was labelled in CWM. Mount the USB to your PC and push over the file. Then in CWM choose install from sdcard (I think, too lazy to look). Navigate to the rom file and run it. All should be well after that.
Matt
I've had issues with the dancing droid boot animation (as have many others) where it won't get past the boot screen. I wouldn't recommend it for anyone.
japhule said:
I've had issues with the dancing droid boot animation (as have many others) where it won't get past the boot screen. I wouldn't recommend it for anyone.
Click to expand...
Click to collapse
How do i get the stock one back? im kinda tired of him also
This one click method called Razorclaw came out today and I rooted it no problem. The problem is that the stock recovery is still installed and I have no clue how to install Roach2010's (http://forum.xda-developers.com/showthread.php?t=1213723) port of CWM Recovery onto my TF. If anyone can post a detailed step by step on how to do that, I will greatly appreciate it. Please and thank you in advance!
In that Razorclw thread look for Gnufabio's Recoveryinstaller app.
It will install cwm recovery
RazorClaw and Gnufabio's Recoveryinstaller app worked perfectly on my new Transformer B80.
Thanks alot but that doesnt seem to be working. just looks like something is flashing then just reboots and i try rebooting into recocery and it just reboots.
Sent from my Transformer TF101 using Tapatalk
Alright thank you for the help. I finally found out I had to press the volume down button then volume up after I did the recovery app.
Sent from my HTC Vision using Tapatalk
You could also try this from the market
https://market.android.com/details?id=com.transformer.recovery
Makes things a little simpler.
I try and make a backup after following the two steps above, but it errors saying it can't mount /sdcard. Not sure if its referring to the internal memory or my sd card. I have a b70 and have been itching to install a rom since I bought it.
Oilersfan said:
I try and make a backup after following the two steps above, but it errors saying it can't mount /sdcard. Not sure if its referring to the internal memory or my sd card. I have a b70 and have been itching to install a rom since I bought it.
Click to expand...
Click to collapse
It store the backup to the external micro sd card. If you have one and it can't mount, try to format it again on a PC
I have my sd card formated to exFat to support files over 4 GB, do I have to go back to Fat32?
Oilersfan said:
I have my sd card formated to exFat to support files over 4 GB, do I have to go back to Fat32?
Click to expand...
Click to collapse
Yes I believed the tf only recognized fat32 for the micro sd card
Upon trying to update my TF101 device to Jelly Bean using this guide (wiki.cyanogenmod.org/index.php?title=Install_CM_for_tf101), at the 6th step of Installing CyanogenMod from recovery (i.e., Select install zip from sdcard) the tab says it's unable to mount the SD card.
The exact error is: E: unable to mount /sdcard/
I have CWM v6.0.1.3 installed.
Now, I'm stuck with a TF101 that isn't detectable via USB (or APX for that matter) running ClockWorkMod without root. What do I do? I'd like to upgrade to JellyBean but if that's an issue, I do not mind sticking with ICS.
Bear in mind that I'm completely new at this and I might need a step-by-step guide.
P.S. - I can't post links. Sorry.
If you boot to ICS and enable USB Debugging in Settings - Developer Options, is your device visible from the PC?
If yes, then I would try using PERI to root and install CWM.
If not, then I would try installing the Hybrid Touch 6.0.1.2 of this recovery: http://forum.xda-developers.com/showthread.php?t=1855686 Download the file in ICS, place it in the /sdcard/, flash from Recovery and see if it will let you. If you can see your microSD from recovery put it there. Then reboot and you should have a working recovery.
I have seen quite a few people try to use that wiki 6.0.1.3 and have no luck with mounting the /sdcard/
vigneshwerv said:
Upon trying to update my TF101 device to Jelly Bean using this guide (wiki.cyanogenmod.org/index.php?title=Install_CM_for_tf101), at the 6th step of Installing CyanogenMod from recovery (i.e., Select install zip from sdcard) the tab says it's unable to mount the SD card.
The exact error is: E: unable to mount /sdcard/
I have CWM v6.0.1.3 installed.
Now, I'm stuck with a TF101 that isn't detectable via USB (or APX for that matter) running ClockWorkMod without root. What do I do? I'd like to upgrade to JellyBean but if that's an issue, I do not mind sticking with ICS.
Bear in mind that I'm completely new at this and I might need a step-by-step guide.
P.S. - I can't post links. Sorry.
Click to expand...
Click to collapse
ok first mount usb
load your zip into internal sd card
unmount usb
factory reset from recovery
erase cache
erase dalvcache in advanced
install zip from internal sd card
frederuco said:
If you boot to ICS and enable USB Debugging in Settings - Developer Options, is your device visible from the PC?
If yes, then I would try using PERI to root and install CWM.
If not, then I would try installing the Hybrid Touch 6.0.1.2 of this recovery: http://forum.xda-developers.com/showthread.php?t=1855686 Download the file in ICS, place it in the /sdcard/, flash from Recovery and see if it will let you. If you can see your microSD from recovery put it there. Then reboot and you should have a working recovery.
I have seen quite a few people try to use that wiki 6.0.1.3 and have no luck with mounting the /sdcard/
Click to expand...
Click to collapse
No such luck. Still not able to mount the /sdcard/ and it doesn't seem to recognise the microSD as far as I can see.
Might be a bad USB cable. I have seen a few users (myself included) where my cable would charge, and be recognized by the PC but it would not do APX or ADB. New cable fixed it for me, and most others.
frederuco said:
Might be a bad USB cable. I have seen a few users (myself included) where my cable would charge, and be recognized by the PC but it would not do APX or ADB. New cable fixed it for me, and most others.
Click to expand...
Click to collapse
It was working till right after I fell into this rut.
I used mine for ADB, 3 days later I tried it again and no dice. Thought it was the ROM I was on, tried another one, still no dice. Flashed back to stock rooted, still nothing.
New cable, viola!
htchd2fix said:
ok first mount usb
load your zip into internal sd card
unmount usb
factory reset from recovery
erase cache
erase dalvcache in advanced
install zip from internal sd card
Click to expand...
Click to collapse
I'm unable to mount/unmount USB, as in, it doesn't do anything at all. My laptop still doesn't recognise the tab.
frederuco said:
I used mine for ADB, 3 days later I tried it again and no dice. Thought it was the ROM I was on, tried another one, still no dice. Flashed back to stock rooted, still nothing.
New cable, viola!
Click to expand...
Click to collapse
Okay, done. I shall let you know in a couple of days.
Ordered a new cable online.
I have spent the last 3 days trying to upgrade my Tf101 with an up to the minute os but have bitten off more than I can chew. I spent the whole of the first day just trying to root it to no avail. Ok, no problem, sleep on it. Next morning tried a different method and " hey presto " I have done it.
So, next job is download " Titanium " and make back up to micro sd card, all done. I then followed " Frederuco's Guide and installed EasyFlasher with TWRP 2.3.6.0 and with a bit of fiddling and button pushing managed to load it and followed his guide right through to the second option " Custom Rom with custom recovery ". I had loaded KatKiss 4.4.2_019.zip along with the add on pack and the latest Gapps package. So far so good. Did full the full wipe/ factory reset, cache, davlick cache, system etc, more success, nearly there. Back to TWRP home screen an click INSTALL to start the flash............where is the micro sd..........? Check further.........micro sd not mounted......oh sugar.......
So now I'm screwed, I think I have bitten off more than I can chew. My little TF101 was working fine before I messed with it albeit a bit slow but it was working. Micro sd card slot was working fine up until now. I am not that PC literate if anyone can help me it needs to be in simple terms please, but I can follow instructions. My pc is running on win 7 32 bit. The Asus was totally stock on the last firmware that ended with .27
I do have a keyboard dock with it but has not been coupled to it through out this process.
Have I trashed my little Asus..?
I appreciate any thoughts even if it bad news. This is the first time I have ever attempted something like this, a total newbie.
Thanks,
Steve
Go to the "Mount" option in TWRP and mount the MicroSD ?
If I remember correctly, with the newer TWRP builds, you have to change between Internal and External SD using a dropdown on the Install page
Also, you need to have the micro SD installed on boot I believe. It is not auto mounted in TWRP.
*Detection* said:
Go to the "Mount" option in TWRP and mount the MicroSD ?
If I remember correctly, with the newer TWRP builds, you have to change between Internal and External SD using a dropdown on the Install page
Click to expand...
Click to collapse
Tried that, it says something like " unable to mount in the logs " Did it quite a few times.
Thanks for the reply
frederuco said:
Also, you need to have the micro SD installed on boot I believe. It is not auto mounted in TWRP.
Click to expand...
Click to collapse
I thought that and that could have been my first mistake as I had not got the files on it when the Guide told me me to install the rom to flash.
I then put the files on a inserted the card but obviously it still did not mount. I did try the " mounting option " in the program but as you can see I did not manage it. I will try again but I am not holding my breath...!
Thanks for your reply.
Steve
Tyr flashing a different version with Easyflasher
http://forum.xda-developers.com/showthread.php?t=1688012
Or
Download a different flashable TWRP zip - 2.3.2.3 is the latest official build
Connect PC > TF and boot into TWRP
Use adb to push version 2.3.2.3 to the TF internal sdcard
adb push twrp.zip /sdcard/
Then flash from internal sd
You could do the same with the ROM
ok, lost me there....what is ADB ?
Just use Easyflasher, it's easy and quick
ADB
http://www.geek.com/mobile/what-is-adb-and-how-do-i-use-it-1461697/
I'm still trying now, have Easyflsher open but am struggling with it.......I've done so much reading my brain is pickled...!
I have been trying to use ABD sideload but it is not loading........
I am still trying to sort my problem out.
I have downloaded fresh copy of EasyFlasher- 0.8.3b-STABLE_2.6.3.0 which I assume is the latest version?
I am able to get the TF101 into APX mode and load TWRP.
It would appear that the TF is not connecting to my win7 PC because of a driver issue. When I go to device manager the Android ATP device has a yellow triangle through it which I asume is the driver issue. It keeps trying to load a new deiver but ends up as " Failed "
The drivers that I am pointing it at are " Universal Naked Driver 0.72 which I thought where the ones required or perhaps I am doing something wrong...?
I assume if I can get this connected I can move forward.
Can anyone help me with this issue please. I tried till 02.30 this morning, I never figured that it was going to be this hard..!
Thanks in advance
Steve
trwp 6.3.2.0
i am the first homebrew said:
I am still trying to sort my problem out.
I have downloaded fresh copy of EasyFlasher- 0.8.3b-STABLE_2.6.3.0 which I assume is the latest version?
I am able to get the TF101 into APX mode and load TWRP.
It would appear that the TF is not connecting to my win7 PC because of a driver issue. When I go to device manager the Android ATP device has a yellow triangle through it which I asume is the driver issue. It keeps trying to load a new deiver but ends up as " Failed "
The drivers that I am pointing it at are " Universal Naked Driver 0.72 which I thought where the ones required or perhaps I am doing something wrong...?
I assume if I can get this connected I can move forward.
Can anyone help me with this issue please. I tried till 02.30 this morning, I never figured that it was going to be this hard..!
Thanks in advance
Steve
Click to expand...
Click to collapse
Hi, don't panic, you have already install TWRPP. At first be sure your microsd card is always on fat32 and get rom and googapps
If ok put your pad off and insert your sd in. Reboot on twrp. To see your sd card hit install, on the high of the screen you can see "choose a zip to install", above hit on "storage internal storage", a new screen will open, select micro sd, your rom and should be here. If you want to remake all wipe before flasing hit the back arrow in the hight right corner. Hit Wipe on the menu, select partitions to wipe, hit all except micro sd and external (of course). Install rom and gapps, wipe cache and dalvik cache, reboot. I try it this day on twrp 2.6.3.10, i don't remenber for 2.6.3.0, but the way is the same. Good luck
jh1969 said:
Hi, don't panic, you have already install TWRPP. At first be sure your microsd card is always on fat32 and get rom and googapps
If ok put your pad off and insert your sd in. Reboot on twrp. To see your sd card hit install, on the high of the screen you can see "choose a zip to install", above hit on "storage internal storage", a new screen will open, select micro sd, your rom and should be here. If you want to remake all wipe before flasing hit the back arrow in the hight right corner. Hit Wipe on the menu, select partitions to wipe, hit all except micro sd and external (of course). Install rom and gapps, wipe cache and dalvik cache, reboot. I try it this day on twrp 2.6.3.10, i don't remenber for 2.6.3.0, but the way is the same. Good luck
Click to expand...
Click to collapse
Thanks for the reply.
I had 3 hrs on it yesterday before your reply and got nowhere so decided to give it a break last night..!
I appreciate your help with this and will attempt to follow your instructions tonight after work. Are you saying that I should disregard the driver issue as you think I am connected to TWRP ok?
Thanks again
i am the first homebrew said:
Thanks for the reply.
I had 3 hrs on it yesterday before your reply and got nowhere so decided to give it a break last night..!
I appreciate your help with this and will attempt to follow your instructions tonight after work. Are you saying that I should disregard the driver issue as you think I am connected to TWRP ok?
Thanks again
Click to expand...
Click to collapse
Yes, that the way i try first, if you can boot on TWRP there'snt any reason to reflash it !
To jh1969
I followed your instuctions......perfect, I don't think I would have figured it without your help. My micro sd card was formatted in NTFS...! Did format to fat32 and things started to work. Started form the beginning again and now I have it working again....!
I did a back up using Titanium (Apps+data) to the micro sd before I screwed it all up, just got to figure out how to restore that then things will be a lot better. Any idea how I get Gmail back ?
Thanks again for your help.
Figured out my Gmail problem, found the app on the play store, not sure how I missed it the first time.
Could not figure out Titanium, did try loads of times to restore apps & data but no luck so another late night downloading all the apps one by one and getting them all going.
At least I now have my pad working again but still have some issues to sort out.
I cannot get the camera working, when I try to open it I get " Unfortunately, Gallery has stopped"........I get the response also when I try to open " Gallery "
I have not yet figured out a quick way to look at the Micro SD....on the stock TF101 rom there was an icon you could open up in the bottom left corner but of course that has gone now. Any ideas?
Overall I am very please the way it is performing now, it is much quicker than it was prior to this update so thanks to all for there time for all who have developed these software's/roms etc to enable people like me to enjoy my TF101 and extend its life further. I would like to increase it speed a bit more but I think I had better get any issues sorted before I attempt anything else. I have not put it in its dock yet so will try that later today.