Related
To cut a long story short, i dropped my xda2 in the toilet at work!
so went home and claimed it on my house insurance and i now own a lovely spvm2000 but im left with this xda2 thats been down the pan, the thing switches on and it all appears to work fine except its black listed, obviously coz i claimed on insurance so i will open it up and sling the pcb in the bin, unless anyone wants some componets from that, but i shall not be selling the phone complete or the pcb seperate. so for sale i have everything else here is a list of what i can think of
fully working screen with no scratches
houseing(scratched but back cover is fine)
4 styli (3 in original o2 retail pckaging)
all the box with instruction and sw cd
leather case
aluminium case (scratched)
Genuine Battery
Cradle
thats all i can think of atm, if u want any of it just make me and offer, dont want much for the stuff as its just sitting there redundant now and not being used!
if u can think of anything else that came with the phone that ive not listed let me know and ill let u know if i got it!
mike
Before you throw the board away it will work in other countires, maybe somebody has a knackered motherboard in usa and could use a replacement.
well its still a blacklisted phone, i know it will work in america or other countries but its still illegal, i know it was my pohone that i flushed down the toilet but still illegal to sell it coz it blacklisted so ill just sling it and sell the other parts of the phone
slung it yet?
Hello, I'm interested in your tft display. mine got cracked, and I'm not about to pay the outrageous replacement pricing that the German T-mobile wants...
you'd save the day (month, etc.) if it's still around. By the way, I'd also be interested in the accessories like cradle, pouch belt clip, sync cable, etc. they seem to be designed to last 6 months, and if your belt clip croaks over here (Germany) the telekom suggest that you buy a new leather pouch, "which comes with a new belt clip" (***holes):evil:
all the best
mike
slung it yet?
Hello, I'm interested in your tft display. mine got cracked, and I'm not about to pay the outrageous replacement pricing that the German T-mobile wants...
you'd save the day (month, etc.) if it's still around. By the way, I'd also be interested in the accessories like cradle, pouch belt clip, sync cable, etc. they seem to be designed to last 6 months, and if your belt clip croaks over here (Germany) the telekom suggest that you buy a new leather pouch, "which comes with a new belt clip" (***holes):evil:
all the best
mike
Hello NeCrOpHiLiCaT
I see your post is some time ago but maybe I have some luck.
I need complete housing for xdaII,but maybe for precautions I'll buy some other parts or maybe all your xda2.just tell if is still available.
Still got the cradle?
Hi,
I am also interested in the cradle, do you still have it? Thank you.
Nick Lee
Hi I'm interested in you mainboard with speaker . Do you still have them?
Hey all, I just noticed that the official Powermat back battery door for the MT4GS is on sale at T-Mobile for ten bucks. You'll still need the actual Powermat charger, which goes for $20-30 online. The website also charges shipping and sales tax, FYI. But still a good price:
http://www.t-mobile.com/shop/addons/accessories/default.aspx?categorycode=898#tblId10
great find, is it only in black?
These are highly worth the money, it charges the phone much faster and is nice to not "plug" my phone in..
Got one for xmas and works amazing..
Sent from my myTouch_4G_Slide using Tapatalk
shady503403 said:
These are highly worth the money, it charges the phone much faster and is nice to not "plug" my phone in..
Got one for xmas and works amazing..
Sent from my myTouch_4G_Slide using Tapatalk
Click to expand...
Click to collapse
my battery door just **** the bed, so this is a godsend!
Case that fits?
I just got the PowerMat and battery door when I upgraded on Saturday. I love it, but I can't find a case that will fit over the slighty larger than normal battery door. Has anyone else had luck finding something that works?
Where's the best place to get a single position mat? Best price?
rorytmeadows said:
Where's the best place to get a single position mat? Best price?
Click to expand...
Click to collapse
I looked around Amazon a little bit and saw plenty of single-position mats for a particular device, usually including the receiver door for that device, for under $10. (You know, for a device that you don't have. ) Here is one example (for BlackBerry Bold 9700): http://www.amazon.com/Powermat-Position-Charging-BlackBerry-Receiver/dp/B00462QB4C
It looks like these mats have a custom indentation to hug the back of the device, so it's unlikely to be a perfect fit. Also, if you device doesn't fit into the indentation, it might not charge.
But ... cheap! Most of these are not Amazon Prime eligible, so it costs another few bucks for shipping.
---------- Post added at 10:48 AM ---------- Previous post was at 10:41 AM ----------
I'm sort of inspired by this thread to try hacking some powermat chargers for some other phones where the receiver is still expensive or there just isn't a receiver. If you search around, you can find some reports of folks who have done this with varying degrees of aesthetic sensibility in the results.
One idea, that I kind of like a lot, is to use the Palm Pre charging "Touchstone" as the transmitting mat. Because the Palm Pre was kind of a dud in the marketplace, the Touchstones are available for pretty cheap. Here's an example at Amazon for under $5, including shipping: http://www.amazon.com/Palm-Touchstone-Charging-Dock-Pre/dp/B002CMEIWK. One hitch with the Touchstone is that it uses a couple of magnetic thingies to activate it (and, I guess, hold the device in place). I'm sure one could deal with that somehow.
Thanks for the last post.
Alright, I'm totally confused. I took a look on Amazon earlier this week, but without confidence in the mat actually working with the device perfectly, I decided to check out what was in stores.
I go to Best Buy and couldn't find them. I asked an associate and they said that they no longer are carrying PowerMats because of the shorting out risk.
Ummmmmmm, okay....
I go to Radio Shack and the associate there starts talking to me about two different types and how one doesn't charge fully all the time and that kills your battery over time and the other involves walking around with a "puck" on your phone.
What the hell is everyone talking about??? I thought these were pretty good and I'm reading nothing but nice reviews online, with the exception of the expense. Frankly, at $10 plus shipping for the case, I no longer care about the expense.
Thoughts????
I don't know anything definitive about most of that. From poking around today, I've deduced a few things (none of which involved "shorting out" ).
Powermat and Duracell both made something that looked like roughly the same technology. Some time in the recent past, Powermat and Proctor and Gamble (who I guess own the Duracell brand?) formed a joint venture or some marketing agreement to make and sell "Duracell Powermat" devices.
The mention of a puck thing could mean either of two things. First, Powermat sells a "universal" receiver, which is a little block with the inductor coil inside it. You still have to connect it to your phone's charger port via mini/micro USB (or one of their other tips). Of course, you wouldn't have that on all the time, except when you are charging. Second, Duracell sells or used to sell a gadget that semi-permanently plugs into your USB port and then sticks to the back of your phone. The latter sounds like what the RS guy was talking about.
After a couple days out of town, I returned to find a bunch of packages of el cheapo Powermat stuff for experiments.
I got a single-position mat specially intended for iPhone 3G and 3GS from a 3rd party supplier on Amazon for $7.44 (and free shipping due to Amazon Prime). With the MT4GS Powermat receiver cover from T-Mobile, I can charge using this mat. It's not a perfect fit. The mat does have an indentation, but it's not for the iPhone. The included iPhone case has a rectangular hump on the back, and the indentation is for that hump. Still, by wiggling things a bit and placing the MT4GS off-center, it does charge. The MT4GS cover does not have that hump ... it's just slightly thicker than standard overall.
From the feel of things, there must be magnets that activate the mat. So, I had to fiddle with the placement of the phone to get the mat to turn on. Once it did, the charging light came on for the phone.
(I haven't taken any of this apart yet, so I'm speculating a little.)
On spec, I bought a Palm Pre Touchstone charging kit. They are pretty cool looking and are available pretty cheaply. (Mine cost less than $10, and I've now seen them for $4.) Alas, the kit include the charging dock (which I hope turns out to be compatible with Powermat) and a receiver cover for the Palm Pre (yawn), but it turns out that it wants to reuse the power cord from the original Palm Pre charger.
It looks like it's a mini USB connector (though it could be micro USB), but it fits into a pretty cramped tunnel in the charging dock. None of the USB cords I have on hand will fit all the way into that tunnel.
So, that's a bit of a bust, but I reckon I might buy a Palm Pre power supply since they are also pretty cheap. The looks of the Touchstone are so cool, I hope I can get it working with my MT4GS.
Anyone interested in one or two of these?
Sorry to Necro this thread but has anyone gotten this door to work with Qi chargers? I suppose it won't work out of the box but I can imagine switching out the coil with one for like a SGS3 or some such.
hi everyone ,i was looking for some opinions about the officil samsung cover s view,and how about an external portable battery for long travel,if anyone would have any suggestion or advices about,wait for you
I bought my GS4 last friday, I already ordered both the S view cover and a spare battery and charger both oem from samsung... Should receive everything friday... Look on youtube for S view cover review you will get a ton of different opinions. ..
Sent from my Ssamsung Galaxy s4
I bought an s cover view OEM (without the latch) from best buy for 12.99 because of their amazon matching. I got it in blue and have absolutely nothing bad to say. I have a ghost armored screen protector and the sliding to answer / end call works flawlessly still. Also case sort of keeps shut by itself. Where previous ones used to get worn out n move around or stay open, this is not the case anymore for this product.
Sent from my SGH-M919 using xda app-developers app
how about an usb power bank?
I've got this one:
http://www.amazon.co.uk/TeckNet®-Ex...id=1377034166&sr=1-1&keywords=tecknet+7000mah
charges the phone 2.5x times
I am looking to buy an official Samsung black, battery door. Is Samsung selling those yet? Has anyone bought one yet? I am not looking for the wireless charging battery door, just one that has the waterproof gasket on the door. If not, is Amazon or Best Buy selling official battery doors yet and has anyone purchased one yet?
Thank you, I appreciate the help.
Hi,
I'm in intrested in buying the wireless charging cover for the s5 but I don't now if it is worth it.
If someone had it could he give me some feedback? Thanks
There are severalI different charging covers @ the market.
I own the S charger cover EP-CG900IWE by Samsung and I don't want to miss it
What's wrong with just plugging it in?
doing wireless gives you flexibility , just put it on tap of wireless charging pad and will charge the phone
Bought mine maybe 6 months ago, it's an S-view wireless back cover combination from Samsung. I have to say it's great having this, I have 2 charging pads, one at the office and one at home; I just place my phone to the pad when I'm not using it and doing work, and at home I place it on the pad before going to bed so I don't have to worry about battery level anymore.
The only thing you should check out is it's losses(power), with 2 Amps of input, you might only get 700-1000 mA of output so charging will take twice as much time as it would if you use the stock charger that came with the phone.
MyMii said:
There are severalI different charging covers @ the market.
I own the S charger cover EP-CG900IWE by Samsung and I don't want to miss it
Click to expand...
Click to collapse
I wish I could find one for under $100... sigh
I'm not allowed to post links , otherwise - is your google not working
~ 23 €
From where? Only one ive found that is genuine is on amazon for 100
I don't really want the s view case...
I use genuine Samsung wireless charging back cover , from Amazon UK £28 with a Cheotech 3 coil charging pad, from Amazon UK £19
Anyone managed to find black cover with Qi? There are some on eBay from USA, but with sick prices (100$ and more). There is one on Amazon UK http://www.amazon.co.uk/Samsung-Charger-Cover-Galaxy-S5/dp/B00IN9HZ0S/ref=sr_1_10 but "Temporarily out of stock". I've even talked with Samsung customer service in Poland and they said they don't have it.
I have this chinese Qi coil that goes under back cover, but it's rubbish. It lifts the cover a bit, making gap around LEDs and ruining water resistance.
mietekxxx said:
Anyone managed to find black cover with Qi? There are some on eBay from USA, but with sick prices (100$ and more). There is one on Amazon UK http://www.amazon.co.uk/Samsung-Charger-Cover-Galaxy-S5/dp/B00IN9HZ0S/ref=sr_1_10 but "Temporarily out of stock". I've even talked with Samsung customer service in Poland and they said they don't have it.
I have this chinese Qi coil that goes under back cover, but it's rubbish. It lifts the cover a bit, making gap around LEDs and ruining water resistance.
Click to expand...
Click to collapse
I've got the same problem mate. I'm about ready to accept that fact that if I want Qi charging with good looks I'll have to buy an S-View cover
I've talked with support on Amazon UK. They told me it's really "temporarily" and if I buy it, they'll have it in few days. I'll try. If not - probably S-View + carpet knife to remove the front.
This may sound stupid but Ikea sells them, but only in white $15. I know sounds crazy right!
I've had the wireless charging cover + pad (not s-view version) and i say that i really enjoy the use of it -- very convenient.
Got a pad in the office, the bedroom and in the car!
Charges slower than cable obviously and the phone does warm up quite a bit, thankfully it will pause the charging if it gets too hot so no biggie on that
Rdk337 said:
This may sound stupid but Ikea sells them, but only in white $15. I know sounds crazy right!
Click to expand...
Click to collapse
Do yourself a favour and do not buy those.
They don't fit properly and I'm sure they don't even properly seal the back.
Tried one and immediately gave it back.
It was incredibly difficult for me to find one of those back covers as well (germany), but after days of searching trough various vendors that are supposed to are samsung resellers, I finally found an original S-charger cover for my white S5 on amazon for 30€.
Take a look:
Telefonide tarvikud | Maxfield - Samsung - PowerNeed - Grateq - Omega - Ansmann - Olloclip - Caterpillar - KSIX - Sony - Photopoint
I use an Easychee qi-Pad. Lifts the backcover a very very little bit.
In combination with an easychee t300 the best thing for my s5 i ever had.
Perfect charging through my silikon flip case.
For the easychee t300 (about 40$) theres a special tip.
I bought it via amazon. Its name is KOS-T30PC Charging Pad.
Its 100% the same pad. Cost 15$ via amazon.
Look its this one
Amazon US and Amazon UK now have them listed and "temporarily out of stock". I "bought" one on each site. If I ever receive one, I will cancel the other. Or accept it and sell it on eBay.
The UK one was 23 pounds. The one on Amazon US was only USD$22! And "Usually ships within 1 to 2 months."
http://www.amazon.com/gp/product/B00ITI24EK
We'll see...!
---------- Post added at 02:42 PM ---------- Previous post was at 02:40 PM ----------
For you that use the S-View cover, doesn't that front flap get super annoying? Don't you have to open it and fold it back every time you use the phone for anything, including talking on it?
That thing looks so annoying that for now I am just sticking with plugging a cable in whenever I need a charge - even though I already have Qi charging pads everywhere.
I'm using oem qi cover. It works perfectly and keeps the phone waterproof. Can't remember how much I paid for it but not more than $50.
Absolutely must have in the car. I'm using a QI charging car mount. For home - not that important but still very nice.