Database Info

[Q] Serendipity VII Infuse

I seem to be stuck in a loop after flashing Serendipity VII Infuse.
My infuse is at the home screen showing the clock, unlock slider and volume slider. Screens says (no Service). Top of screen is running a media scanner.
As soon as it finishes scanning the media, the screen goes blank, shows the Serendipity boot screen w/progress bar, then back to the home screen with the two sliders.
It does not reboot all the way to when it says Samsung.
I've reset and cleared the cache in the red cmw.
Any ideas?

same thing here.

You wouldn't happen to have a SIM password?

mine worked fine for a few hours. Then I rebooted.

MikeyMike01 said:
You wouldn't happen to have a SIM password?
Click to expand...
Click to collapse
Yup, but it never let me enter it.
I just ran odin to fix. I'll remove the sim password and retry.
Thanks.

That was it. Installed perfectly.
Thanks

not to hijack this thread, but if i'm coming from froyo, do i need to delete my recovery file before flashing your rom?

mine began after I installed a themed battery pack. sys wipe and re-install and all is well.

Car Dock Issues
So I flashed Serendipity VII yesterday from Infused V1, and let me start by saying it's awesome.
I am having an issue with the car dock, though. It actually worked fine the first time I used it, but now the sound won't redirect to the dock. It's not a huge deal because I can just plug the cable in directly to the headphone jack, but one of the great things about the car dock was that I didn't have to deal with the wires. Anyone have any ideas?

Where do we download it from? I see it in dev section but no links or instructions.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App

nash2000 said:
Where do we download it from? I see it in dev section but no links or instructions.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
Go to http://serendipityinfuse.weebly.com/ and click download at the top. Took me some time to figure it out too.

I am currently running Infused 1.6 with the Infusion 2.0 Core A kernel. I would like to move to the GB release of Serendipity VII, do I have to go back to stock or can I just flash the download through red CWM from the serendipityinfuse website over my current build and do a full wipe?
Will the download also include the kernel it needs to run?
I'm have seen some mixed information on the actual process for installation coming from custom roms and kernels. This is the first time I am going to be updating to GB.

rocketshipdog said:
I am currently running Infused 1.6 with the Infusion 2.0 Core A kernel. I would like to move to the GB release of Serendipity VII, do I have to go back to stock or can I just flash the download through red CWM from the serendipityinfuse website over my current build and do a full wipe?
Will the download also include the kernel it needs to run?
I'm have seen some mixed information on the actual process for installation coming from custom roms and kernels. This is the first time I am going to be updating to GB.
Click to expand...
Click to collapse
Backup your apps with TiBu, download Serendipity VII to sdcard, go to Red CWM, Full wipe, flash Serendipity VII, reboot, restore your apps only (NO SYSTEM DATA), Enjoy!
It really is an awesome ROM! I flashed it yesterday and love it!

Worked like a charm!
Sent from my SGH-I997 using XDA App

i feel like an idiot....but how do i get to red cwm? all im getting is green.

jeremy651 said:
i feel like an idiot....but how do i get to red cwm? all im getting is green.
Click to expand...
Click to collapse
Don't feel like an idiot, we're all learning over here in Q&A.
Turn the phone off and then hold the VOL + and - keys and the power key at the same time for about 10 seconds then release.
If you are not getting Red CWM then it may be because you do not have Voodoo Lagfix installed. Is your phone stock, have you ever installed any other ROMs? Mine started giving me red CWM after I installed the Infused 1.6 ROM.
Hopefully we can get some more advanced users in here to lend a hand, I would like to learn more about this process also.

im in here let me know whatcha need !

i used to have infused 2.1....or 2. something and i wanted serendipity. so i tried to install and nothing would happen. so i went back to stock and all kind of problems started. but im gonna give this a shot
---------- Post added at 03:12 PM ---------- Previous post was at 03:06 PM ----------
ok i held the keys and it sent me to a blue screen. if i press reinstall packages it then sends me to the green cwm screen. could someone let me know whats going on lol

i went back to stock using the unbrick method and now i cant download anything from the market. i hit install and the download bar pops up for a second and then dissappears. cant even install apps that i had before

does anyone know if you can restore all missing apps and data with serendipity. i somehow got it to flash and was jw. thanks

[EP3HA][Stock][ODIN] EP3HA Full & Debloated Deodexed (10/9/11)

I got a request earlier today to make deodexed versions of the EP3HA release, as I had made for the EP1W (http://forum.xda-developers.com/showthread.php?t=1260214) release. So here it is. These files are 7zip just like the original release from TBH. I tried .zip .rar and .7z and found the highest compression was with .7z so thats what I used.
There are absolutely no changes from the TBH release except that it is deodexed. It will delete all data and leave you stock rooted, including the recovery, so you will certainly want to follow up your ODIN flash with a flash of CWM 4.0.0.8, which is also attached.
EP3HA Full Deodexed
EP3HA Debloat Deodexed
CWM Recovery 4.0.0.8
In case you want to use the Debloated version, but there are still some apks that you want from the full version, here is a link with all of the original apks from the full version:
EP3HA Stock APKS
If you find this useful, please click the thanks button.

thanks an always can use a backup an for the work

thank you!!!

bahamaberry said:
thank you!!!
Click to expand...
Click to collapse
No problem. Also going to update the OP with a download for all of the apks from the original full version in case there are some people want to add to the debloat

Does this have the ugly brown color?

ForeverSupra said:
Does this have the ugly brown color?
Click to expand...
Click to collapse
Yes, that is the stock theme. However, because it is deodexed, you can either theme it yourself, or use a theme that is already out there.

stranula said:
Yes, that is the stock theme. However, because it is deodexed, you can either theme it yourself, or use a theme that is already out there.
Click to expand...
Click to collapse
Sorry for asking such a noob question ..but what is the difference using a deodexed version ?
Sent from my SCH-I510 using Tapatalk

gemro311 said:
Sorry for asking such a noob question ..but what is the difference using a deodexed version ?
Sent from my SCH-I510 using Tapatalk
Click to expand...
Click to collapse
Deodexed allows [easy] theme creation and install. It is possible to theme without deodexing, but its more difficult. Aside from that, no advantages that I know of. Some have claimed performance differences one way or the other, but I don't think there is any substantial difference.
If you are asking what is deodexing...http://www.addictivetips.com/mobile/what-is-odex-and-deodex-in-android-complete-guide/. Basically, for each apk there is an odex file, by deodexing you combine them into a single file.

How can I get EXT4 voodoo lagfix working? Tried the kernel but didn't do anything except for take away the boot sound. Other than that it works great, thanks!

THEhomelessONE said:
How can I get EXT4 voodoo lagfix working? Tried the kernel but didn't do anything except for take away the boot sound. Other than that it works great, thanks!
Click to expand...
Click to collapse
look for and download Imoseyons v3.0.0 kernel, flashes fine and it will convert you to ext4 no problems

Buzzing, popping crackling noise issue solved?
I've had issue with buzzing, popping crackling noise during a phone call running several different Gingerbread roms, until I encountered this one. I honestly don't know the reason or the cause of the buzzing noise running on other GB roms prior to this one.
I've been running the full deodexed version of this ROM for a few days now, and it has been running flawlessly, no more buzzing noise issue so far. I made sure I took cautious steps installing it. First, I installed the factory EE4 rom properly, back to stock, before I odin this rom. Then I installed Imnut's [8-17-11] Clockwork Mod Recovery (the orange version), and backed up everything. Then I installed imoseyon's GB kernel, v3.1.0, and backed up everything. I use GO Launcher EX (not a big fan of TW stock launcher).
I'll continue testing and will report if I run into the same issue.

hey stranula just a quick question, would it be possible for you or someone who knows how (if its not hard I could even learn myself) to make a CWM package of the debloated leak? I like to be 'bleeding edge' lol and run rom betas but its a pain in the ass to have to Odin back to stock every time to start over when I mess something up

anoninja118 said:
hey stranula just a quick question, would it be possible for you or someone who knows how (if its not hard I could even learn myself) to make a CWM package of the debloated leak? I like to be 'bleeding edge' lol and run rom betas but its a pain in the ass to have to Odin back to stock every time to start over when I mess something up
Click to expand...
Click to collapse
I tried before to do it, and I couldn't get it to work...I will try again in the next few days probably

stranula said:
I tried before to do it, and I couldn't get it to work...I will try again in the next few days probably
Click to expand...
Click to collapse
cool no problem if it doesn't happen, just it'd be super convenient for the small group of flashaholics like myself lol
blazing through on my 4G Droid Charge

So i went back to ee4 stock, then flashed this rom, i installed clockwork mod recovery via odin it said successful but how do i boot into recovery? I thought it was power volume up?? I cant get it to go into cwm to intall th voodo lagfix. I also cant download toast titatnium from the market. No search results. Any input?
EDIT: GOT IT TO BOOT INTO CWM......UP+HOME BUTTON+ POWER BUTTON. I STILL CANT GET TOAST FROM MARKET....SO WIERD.
Ted A said:
I've had issue with buzzing, popping crackling noise during a phone call running several different Gingerbread roms, until I encountered this one. I honestly don't know the reason or the cause of the buzzing noise running on other GB roms prior to this one.
I've been running the full deodexed version of this ROM for a few days now, and it has been running flawlessly, no more buzzing noise issue so far. I made sure I took cautious steps installing it. First, I installed the factory EE4 rom properly, back to stock, before I odin this rom. Then I installed Imnut's [8-17-11] Clockwork Mod Recovery (the orange version), and backed up everything. Then I installed imoseyon's GB kernel, v3.1.0, and backed up everything. I use GO Launcher EX (not a big fan of TW stock launcher).
I'll continue testing and will report if I run into the same issue.
Click to expand...
Click to collapse

killerapl said:
So i went back to ee4 stock, then flashed this rom, i installed clockwork mod recovery via odin it said successful but how do i boot into recovery? I thought it was power volume up?? I cant get it to go into cwm to intall th voodo lagfix. I also cant download toast titatnium from the market. No search results. Any input?
Click to expand...
Click to collapse
You can d/l Quick Boot from the market. QB lets you boot into recovery.
I think Titanium Backup is what you're looking for.

Yeah am an idiot. For some reason i thought the word toast was in there hahah. Yeah def dl quick boot. Thank you so much
Ted A said:
You can d/l Quick Boot from the market. QB lets you boot into recovery.
I think Titanium Backup is what you're looking for.
Click to expand...
Click to collapse

killerapl said:
Yeah am an idiot. For some reason i thought the word toast was in there hahah. Yeah def dl quick boot. Thank you so much
Click to expand...
Click to collapse
Lol. No prob. FYI, when I said I ran a backup, I was using CWM 4.0.1.4 to do an image backup of the whole system.
I hope that solves your buzzing issue. I'm still buzz-free so far.

Well I just made a couple phone calls and no buzzing or crackling. I hope it holds out. I didn't do the cwm backup. Do you think that's necessary to avoid the static noise?
Ted A said:
Lol. No prob. FYI, when I said I ran a backup, I was using CWM 4.0.1.4 to do an image backup of the whole system.
I hope that solves your buzzing issue. I'm still buzz-free so far.
Click to expand...
Click to collapse
Sent from my SCH-I510 using XDA App

killerapl said:
Well I just made a couple phone calls and no buzzing or crackling. I hope it holds out. I didn't do the cwm backup. Do you think that's necessary to avoid the static noise?
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
No, no effect to the static noise issue.
I just recently discovered this nifty tool (cwm backup) myself. The image backup/restore feature lets you backup your current system, as a whole, in case you want to restore it at later date. It stores it into a file in clockworkmod folder. Usually whenever I'm satisfied the way my system works, I'd back it up to the card. And if I want to try a different ROM, for example, I'd run a backup before flashing the new ROM, and if I feel like going back to my previous system, I can just restore it from the card. I may choose to backup the new system prior to doing that, just in case I want to flip back to it. The feature seems to be working well for me. YMMV.

Best CWM Gingerbread

Hey guys... I installed Dsexton rom: [rom] ICBINB KJ6 add on for airflips
I have some issues coming from text messages failing to send, EMAIL app gives me issues when sending emails via Swype keyboard.
Yahoo email wont send and stays stuck on Outgoing.
Im growing tired of it.... what rom does anyone recommend?

Valhalla or octane.
Sent from my SGH-T959V using xda premium

Lvnlegendinc said:
Hey guys... I installed Dsexton rom: [rom] ICBINB KJ6 add on for airflips
I have some issues coming from text messages failing to send, EMAIL app gives me issues when sending emails via Swype keyboard.
Yahoo email wont send and stays stuck on Outgoing.
Im growing tired of it.... what rom does anyone recommend?
Click to expand...
Click to collapse
I'm running the latest KJ6 leak, drhonk's KI1 kernel (with root, voodoo, cwm), with dsexton's Adrenaline Shot. I'm sure you'll get different answers from people, though.
Before you flashed, did you do a factory data reset, wipe caches, etc? I've flashed ROMs & had problems that were solved by doing the reset/cache wipes.

stephen_w said:
I'm running the latest KJ6 leak, drhonk's KI1 kernel (with root, voodoo, cwm), with dsexton's Adrenaline Shot. I'm sure you'll get different answers from people, though.
Before you flashed, did you do a factory data reset, wipe caches, etc? I've flashed ROMs & had problems that were solved by doing the reset/cache wipes.
Click to expand...
Click to collapse
i factory reset on the first rom, wiped cache and dalvik even battery.
Even repair permissions.
on updates i clear cace and dalvik....and it doesnt repair any issues.
I dont know if im doing something wrong..... I dont have access to a PC anymore to OdIn since im on a iMac.
I just grew frustrated and dont know what to do

Lvnlegendinc said:
i factory reset on the first rom, wiped cache and dalvik even battery.
Even repair permissions.
on updates i clear cace and dalvik....and it doesnt repair any issues.
I dont know if im doing something wrong..... I dont have access to a PC anymore to OdIn since im on a iMac.
I just grew frustrated and dont know what to do
Click to expand...
Click to collapse
I hear ya. I wish I had better advice. Exodian pointed out Valhalla and Octane. I never tried Valhalla but I had issues with Octane & the lock screen. Your mileage may vary, though
Good luck!

stephen_w said:
I hear ya. I wish I had better advice. Exodian pointed out Valhalla and Octane. I never tried Valhalla but I had issues with Octane & the lock screen. Your mileage may vary, though
Good luck!
Click to expand...
Click to collapse
Am I doing anything incorrectly?
What would u recommend? I factory reset and reinstall the rom?
and once their are updates what do I do
wipe cache on ext and wipe dalvik?

Lvnlegendinc said:
Am I doing anything incorrectly?
What would u recommend? I factory reset and reinstall the rom?
and once their are updates what do I do
wipe cache on ext and wipe dalvik?
Click to expand...
Click to collapse
I've only installed Octane via CWM. Past that, I've never installed a ROM that way. I'd follow Exodian's advice and give either Octane or Valhalla a shot. Both posts for the ROMs should have the proper method of installation.

Exodian said:
Valhalla or octane.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Which one do u prefer?

Lvnlegendinc said:
Which one do u prefer?
Click to expand...
Click to collapse
I don't have a preference of the two. I never tried Valhalla. I tried Octane for about a day until I realized I had issues with the lock screen not working all of the time.
From what I've read a lot of people enjoy both. My suggestion would be to try one, see how well you like it, try the other, test it, see which suits you better

stephen_w said:
I don't have a preference of the two. I never tried Valhalla. I tried Octane for about a day until I realized I had issues with the lock screen not working all of the time.
From what I've read a lot of people enjoy both. My suggestion would be to try one, see how well you like it, try the other, test it, see which suits you better
Click to expand...
Click to collapse
Ill try Valhalla and see how that goes..... thanks!!!

Lvnlegendinc said:
Ill try Valhalla and see how that goes..... thanks!!!
Click to expand...
Click to collapse
go with Valhalla, i tried them all, but Valhalla seems best for now. ICBINB was great but get laggy after a few days and needed reboot. Later ICBINB had issues here and there.
Valhalla with some build.prop and init.d tweaks runs great for me.
for init.d tweaks, find the "S98tweaks" file and change the freemem value. the last 3 is a little low as set and can cause low mem issues.
this is what i use
"2560,4096,6144,10240,12288,14336"
these build.prop helps
#makes calling out faster, less delay
ro.telephony.call_ring.delay=1000
#smoothertouch input. might already be 65 by default
windowsmgr.max_events_per_sec=65
#prox sensor tweak
mot.proximity.delay=75
#HW accelerate
debug.sf.hw=1
video.accelerate.hw=1
#for data link speed up
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
#enable JIT, just in case it's not by default
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
some of these build.prop settings may be redundant but doesnt hurt to have duplicates

stephen_w said:
I don't have a preference of the two. I never tried Valhalla. I tried Octane for about a day until I realized I had issues with the lock screen not working all of the time.
From what I've read a lot of people enjoy both. My suggestion would be to try one, see how well you like it, try the other, test it, see which suits you better
Click to expand...
Click to collapse
its not the roms fault lol magic locker can be special as it a addon

No Luck Upgrading to official GB

I've had absolutely no luck upgrading from KD1 to offiical GB.
I started off with the official KD1 (from Kies) that I have been running for months.
The only mods are root and CWM.Kies downloads the GB update (taking several minutes) then immediately comes up with the screen saying my phone could not be updated. It leaves the phone in download mode.
If I reboot I'm back to where I was.
Taking a suggestion in another thread, I cleared data and cache, and tried again.
Same result.
Taking another suggestion, I Odin'd another KD1 on top of my original. Same result.
Taking another suggestion, I Odin'd a KC1 on top hoping that Kies would upgrade me to official KD1 or GB. However, Kies took one look and said there was no upgrade.
I've Odin'd back to KD1, so after a lot of work I'm back to where I started.
Any ideas?

Flash ravers kj6 deodexed its the same rom http://forum.xda-developers.com/showthread.php?p=19455525
Sent from my SGH-T959V using xda premium

Stupid question,
Can I flash Raver's ROM directly from Bionix Frost or do I need to go back to a KD1 ROM?

mdrinkwine33 said:
Stupid question,
Can I flash Raver's ROM directly from Bionix Frost or do I need to go back to a KD1 ROM?
Click to expand...
Click to collapse
First you would need gingerbread bootloaders if you have them then flash away, if not you will need to odin kg4 for the bootloaders then drhonks kernel for root then flash kj6 from cwm.
Sent from my SGH-T959V using xda premium

cnote74 said:
Flash ravers kj6 deodexed its the same rom http://forum.xda-developers.com/showthread.php?p=19455525
Click to expand...
Click to collapse
I probably will, but I also would like to find out why I can't Kies the stock GB Rom. Obviously Kies doesn't like something it sees on the phone.
There is another issue I'm fighting at the same time. Until now I didn't have a data plan and just used wifi for data. I just got a data plan and haven't been able to get the phone to use it (just voice/text). I want to put the phone into a completely stock condition to try and eliminate variables, and possibly get T-mobile to help. I also feel that what ever Kies doesn't like might be a factor with the cell data issue.

Kies is potentially bad news for your phone if you've been on a custom ROM. If it doesn't work smoothly on the first try don't try and force it. What inevitably happens is that in a sudden rush to get it to work you start flashing one ROM after another (something you wouldn't normally do) and end up issues. There have been a bunch of posts about losing recovery and download modes as people start trying to flash back to froyo from GB. A buddy of mine just jacked his phone up so bad doing this...no recovery, no download, couldn't get it to adb boot on his Linux box. I finally got it into download mode with an adb/odin circus trick, hail Mary, and odined ravers hawk.zip to clean everything up. There is no way i want to go through that again, and there is no real logic in the way we fixed it, but it all started with a bad flash from kies. To any one reading this, USE THE CWM FLASHABLE THAT RAVER MADE IN THE DEV FORUM, take advantage of their knowledge and hard work and save yourself (and your sgs4g) some heartache.
Sent from my SGH-T959V using XDA App

Try this
Ravers's ODIN for stock KJ6

candler33w said:
Try this
Ravers's ODIN for stock KJ6
Click to expand...
Click to collapse
Thanks! This Odin rom worked for me. The earlier suggested recovery flash rom just got me into a booting loop.

kmandel said:
Thanks! This Odin rom worked for me. The earlier suggested recovery flash rom just got me into a booting loop.
Click to expand...
Click to collapse
thats probably due to you not disabling Voodoo...I did the same thing

is any one having an issue getting wi fi to work after installing dr honks kj1 kernel on ravers 2.3.6 official rom? , everything seems good linda says voodoo activated phone boots up and then i try to turn wifi on and the icon just shuts off and it wont pick up any wifi signal, i tried factory reset wiped the cache batt and dalvick tried it again and nothing!!! so i just had to resort to flashing back to 2.3.6 official rom for cwm and now just have blue and yellow stock recovery if any one can give a few pointers id really appreciate it if not well then just have to wait for all the good **** to come about PEACE

PANTERA56 said:
is any one having an issue getting wi fi to work after installing dr honks kj1 kernel on ravers 2.3.6 official rom? , everything seems good linda says voodoo activated phone boots up and then i try to turn wifi on and the icon just shuts off and it wont pick up any wifi signal, i tried factory reset wiped the cache batt and dalvick tried it again and nothing!!! so i just had to resort to flashing back to 2.3.6 official rom for cwm and now just have blue and yellow stock recovery if any one can give a few pointers id really appreciate it if not well then just have to wait for all the good **** to come about PEACE
Click to expand...
Click to collapse
I would use ODIN to reinstall Dr Honks KJ1. it will give you CWM and You should be OK. It might have just been a fluke on install the first time

Still no wifi "f.m.l"!!!
Everything works accept wifi reinstalled kj1 kernel frs, wiped down phone completley even used odin again to reinstall 2.3.6 official from ravers post and nothing ive done everything 2 or 3 times the sameway even tried different usb slot i used odin 1.85 i just dont get it anyone else got this problem

As ignorant as this sounds, I had the same problem once. I rebooted my wireless router & it started working again.
Sent from my SGH-T959V using XDA App

Tried resetting router and still no luck I give up

Is there security on the router? If so, what happens if you take it off (temporarily)?
Sent from my SGH-T959V using XDA App

[Q] help with infinity rom.....

i have been having issues using the infinity rom when multitasking. for example when i am using pandora thats all i can do. if i try browsing or anything while on pandora my phone freezes and restarts. and everytime i try to overclock it to 1.3ghz it freezes and restarts as well.. this is the process i am using to flash this rom.
1. coming from teawstock v1.4 (latest build), pb&j kernel, tweakstock is already ext4... right.. but thanks to imnuts, he provided the proper conversion tools needed in case i were to be RFS... lol, thanks buddy for this rom in advance. i have flashed everything available for this phone and your rom is by far my favorite... hahaha. i will post a screen capture of my quadrant standard to show you how much ive tweaked my ****.. lol. i think my last benchmark was around 2360...
2. data foctory reset/ wipe cache/ dalvik
3.mount system
4.flash rom/TSM parts, love the TSM parts by the way!!!!!
5. reboot phone.

Can you OC to that level on a different ROM? Your phone just may not be able to go that high.
Sent from my SCH-I510 using xda premium

I have the same problem. i love this rom but have a lot of freezing and rebooting. i see there is a updated infinity rom but have not tried it yet

YAH BABY
stebomurkn420 said:
i have been having issues using the infinity rom when multitasking. for example when i am using pandora thats all i can do. if i try browsing or anything while on pandora my phone freezes and restarts. and everytime i try to overclock it to 1.3ghz it freezes and restarts as well.. this is the process i am using to flash this rom.
1. coming from teawstock v1.4 (latest build), pb&j kernel, tweakstock is already ext4... right.. but thanks to imnuts, he provided the proper conversion tools needed in case i were to be RFS... lol, thanks buddy for this rom in advance. i have flashed everything available for this phone and your rom is by far my favorite... hahaha. i will post a screen capture of my quadrant standard to show you how much ive tweaked my ****.. lol. i think my last benchmark was around 2360...
2. data foctory reset/ wipe cache/ dalvik
3.mount system
4.flash rom/TSM parts, love the TSM parts by the way!!!!!
5. reboot phone.
Click to expand...
Click to collapse
@stebomurkn420 & @nailem
I guess I can't tell you to use the non-tsm rom then eh? I find TSM to be too buggy and cause more problems than extra goodies, plus theming can edit just about any part of your phone on any Rom, icons, statusbar, you name it.
Anyway whenever I flash a new rom I always revert back to stock with the charge.pit file to make absolutely sure that my partitions are set up correctly. A little more time consuming than just wiping data but I have never had an issue jumping from one Rom to the other.
To make sure I was back to ext4 since I was flashing from stock straight into InfinityRom, I flashed Imosey's kernel (which has lagfix) and autoconverted me to ext4, then once my phone booted with ext4 I just wiped and flashed PB&J kernel again. Nice and quick, flashing the kernels to get me to ext4 took all of about 3 minutes. Now I have InfinityRom, PB&J (w/ the awesome advanced sound tweaks), and no lag. If you wanna give it a shot I can help shoot you some links for all the files I mentioned.
Also be careful not to OC too high, there is a point of diminishing returns.

cliMACtic, yes that would be great. I found the updated infinity rom but have never returned my phone to stock. Links and a little instructions would help. Thank you

nailem said:
cliMACtic, yes that would be great. I found the updated infinity rom but have never returned my phone to stock. Links and a little instructions would help. Thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1560117
look for EP4D stock rom link.

thanks climaktik
thanks for your help buddy.. im going to flash through odin back to stock ep4d anyways to do the fp1 modem update that we had last night... then try to reflash infinity without tsm parts... and give that a go.. i tried gummy charge as well last night and was hving freezing issues... i have resorted back to tweakstock for the time being because of its stability.. lol.