I bought an Atrix locally. It has superuser since it was rooted, BUT the seller removed the SD card, so the root isn't working right now.
I tried to upgrade Superuserand I'm not allowed to do so... it says the following: "An error ocurred and su was not updated. A zip file (su-2.3.1-bin-signed.zip) has been placed on your sdcard, please reboot into recovery mode and flash it to update your su binary"
I already inserted my own SD card, but I don't know what to do in fear of bricking my new phone.
Any help would be GREATLY appreciated, thanks!!
Related
MZ601 Xoom on 3.1HC wifi + 3G rooted using Universal Xoom Root. Now wish to be able to use USB Host mode. Have followed the instructions in [ROM] Team Tiamat Xoom Rom 2.2.1 - Moray [18/9/11] including performing a factory reset (Wipe data/factory reset) from within recovery, and then selected "Install zip from sdcard" and selected the Tiamat zip file. The system reports that it is opening the file but then immediately aborts with the above message.
Assuming that the download was not successful I then downloaded again, went through the whole procedure again but came up with the same error. Hmmm this is a bit of a mystery.
So, is 2.2.0 a prerequisite of 2.2.1 and should I have tried to flash that first? Or could there be something else that this old fart is missing? I guess it must be the latter judging by all the success stories on here. Can somebody please help?
Irobbie.
irobbie said:
MZ601 Xoom on 3.1HC wifi + 3G rooted using Universal Xoom Root. Now wish to be able to use USB Host mode. Have followed the instructions in [ROM] Team Tiamat Xoom Rom 2.2.1 - Moray [18/9/11] including performing a factory reset (Wipe data/factory reset) from within recovery, and then selected "Install zip from sdcard" and selected the Tiamat zip file. The system reports that it is opening the file but then immediately aborts with the above message.
Assuming that the download was not successful I then downloaded again, went through the whole procedure again but came up with the same error. Hmmm this is a bit of a mystery.
So, is 2.2.0 a prerequisite of 2.2.1 and should I have tried to flash that first? Or could there be something else that this old fart is missing? I guess it must be the latter judging by all the success stories on here. Can somebody please help?
Irobbie.
Click to expand...
Click to collapse
So, just to clarify, you are rooted and attempting ti install the Moray Rom, and your Xoom is giving you an error that it can't access the sdcard to flash the Moray file.
My first question is, what version of CWM recovery are you using and is your Moray file on your external micro sdcard which is inserted in your Xoom?
It sounds like you are trying to flash from the Xoom's internal "sdcard" which doesn't work (unless you have the Rogue recovery installed).
Thanks for your reply.
Regarding the recovery mode version, in recovery mode my Xoom tells me "Clockwork Recovery V3.2.0.0 (solarnz-R4c-100611-1150).
Using "My Files", I have confirmed that the Zip file doesn't exist on the "Internal" storage, but does exist on the external SD card. This is where the Universal Xoom Root zip file sits and where it was installed from. The root zip file installed smoothly, and as far as I know I followed the exact same steps in trying to install the new rom. So I remain confused.
Once again thanks for your reply and any further help will be appreciated.
Irobbie
irobbie said:
Thanks for your reply.
Regarding the recovery mode version, in recovery mode my Xoom tells me "Clockwork Recovery V3.2.0.0 (solarnz-R4c-100611-1150).
Using "My Files", I have confirmed that the Zip file doesn't exist on the "Internal" storage, but does exist on the external SD card. This is where the Universal Xoom Root zip file sits and where it was installed from. The root zip file installed smoothly, and as far as I know I followed the exact same steps in trying to install the new rom. So I remain confused.
Once again thanks for your reply and any further help will be appreciated.
Irobbie
Click to expand...
Click to collapse
Ok, Sounds like you should be set regarding recovery. I'm pretty sure that you should be able to go right to Moray 2.2.1.
First, confirm that your sdcard is good and working properly by inserting it into a phone or a card reader. It could be as simple as a bad card. Also, you could redownload the file, but I think it's most likely your sdcard.
Thanks for getting back to me.
I replaced the SD card with another from my mp3 player and checked it out by loading up a song and playing it. No problems. So then I moved the zip file for the rom (which I had previously re-downloaded) over to the root of the sd card from my PC and proceeded through the steps again. Failed again. The message sequence reads:
--Installing: /sdcard/Tiamat-Xoom-rom-2.2.1-Moray.zip
Finding update package... (So its gone looking)
Opening update package... (And it is found?)
E:Can't open /sdcard/Tiamat-Xoom-Rom-2.2.1.Moray.zip
(bad)
Installation aborted
Hmmm. Just to check that the sd card is still viable, after reboot went back to "files", sdcard, music and selected a song and it played as normal. Also checked that the Tiamat rom zip file is on the card and yep, it is. So tomorrow morning I will download the zip file once again and retry. If you can think of anything else it will be much appreciated.
Irobbie.
If you can check to make sure the downloaded file is the right size that will be great. also make sure that you don't add another.zip file extension on the end, somehow. Some pcs are set up to hide file extensions and that's been a problem a few have encountered.
The mystery deepens! Well, for me at least.
Re: zip file extra extension, have show extensions switched on, and there is no extra extension.
So on to file size, it looks the same to me on each download so I went a bit further. I noticed the link to the file has a MD5sum check noted. So I downloaded an open source file "Sigma Informatics Checksum calculator", pointed it to the rom zip file and ran the check, and then cut and pasted the original number from the thread and got the calculator to do a check. Bingo - exactly the same!
So then copied the file from the Xoom back to the PC, ran the same checks and got different answer!
OK, I deleted the rom zip file from the Xoom, copied another over from the PC, then recopied it back to the PC to a different location, ran the check sum, got the correct answer, so now I knew I had a correct file on the Xoom.
Next, reran the installation of the Rom - failed again with the same results and messages as before.
Then copied the Rom zip file back to the PC to another location, ran the checksum and different answer popped out again. Well, could it be that the zip file is being corrupted during the install and that is why it fails? I've never heard of that sort of thing happening before but I suppose it is possible.
Your continued support is much appreciated.
It seems like I have heard of this happening, but why? What would cause that? Can you use a different method to copy the Rom file to the sd card? Using an adapter, and inserting the card directly into the sd slot of the pc? Download right onto the card?
Thanks for the reply and suggestions again.
To make absolutely sure I eliminated everything possible; I went out and bought a new micro sd card, and card reader with a micro sd card slot. Plugged it altogether into the pc and copied over a copy of the rom zip file.
Then did a checksum check on the file on the sd card and it was fine.
So, holding breath, puff, puff, puff, started the procedure all over again.
SUCCESS! It all went as smooth as silk! Thanks for your help and suggestions. But now I am left with a concern about where the problem really was - was it in the copying of the file onto the card through the Xoom, or was it, in fact, a bad card? I don't want to discard the card because it seems to be o.k. in every other respect so I think a little play around is in order. I think in all probability you are right in questioning the process I was using before, and recommending that the file be copied directly to the sd card.
But in the meantime I'm off to explore the new rom and in particular USB hosting.
Yes! I love success!
Enjoy.
hey guys and girls, hopefully you can help me out.
I'm using a t-mobile galaxy S, trying to flash a new rom after I rooted it. I followed the instructions, and I have CWM able to load. when I got into select the install from the SD card, I'm able to select the file (trying bionix frost), it tries to load it, but then comes back telling me 'Can't mount /sdcard' and any subsquent attempts to even browse for the install zip give me the same error. I can boot the phone into the rooted stock image, access anything on the SD card there fine, copy files to it, etc, but CWM will not install the ROM's or keep the /sdcard mounted.
anyone here run into this issue? I'm using CwM Voodoo lagfix Recovery 3.0.2.8x
It's been awhile since I flashed that ROM...
Did you change the mounts manually? Does the OP say to change mounts? Back then we had to change the mounts ourselves in CWM to UMMU.
I'm at work and just sending a quick reply..check the OP to see what your mounts should be
to clarify a bit, this isn't just on a specific ROM, this is for ANY rom I try, after I access any ZIP file through CWM, it unmounts the SD Card and won't let me get back to it unless I reboot, and the cycle repeats.
Ok. Sorry I can't help you with that. I'm still kinda new.
I'm sure you'll get the help you need soon especially with your last reply.
Good luck and sorry I couldn't be of help.
I'm backing up and will format my SD card to see if this is the problem, saw this fixed a couple of errors like this for other peeps.
So since I couldn't get CWM to install the rom, I used ODIN and flashed to gingerbread. that's installed and working (had it fail the first time, but the 2nd installed and was up inside 10 minutes)
Hello,
I rooted my tf101, all went well. Put clockworkmod recovery on it and still no problems. Now I wiped all partitions by mistake of my tf101. The only thing left is the recovery image (cwr) but if i try adb tool to push a file on the system it says the system is readonly. If i try nvflash tool is also says error onable to write and it disconnect the tf101.
Can any body help me, or do i have to put it back to repair
thanks Ernst
Well, if you have a microSD card, and a CWM that can read from it, you could just hook the card up to your PC (using a phone with microsd slot, or a cardreader, etc) and place the new image on the card.
Also, have you tried running 'adb root' to make sure ADB is running as root?
@Goatshocker
I tryed to insert a microSD card, but cwr does not recognize it, at least it does not appear in the menu structure.
Also tryed adb root, it sayed hat it is already in root.
ernst99999 said:
@Goatshocker
I tryed to insert a microSD card, but cwr does not recognize it, at least it does not appear in the menu structure.
Also tryed adb root, it sayed hat it is already in root.
Click to expand...
Click to collapse
If you are using cwm 5.5.0.4, go to the following link.
http://forum.xda-developers.com/showthread.php?p=23256536
@kokopopz
I have indeed version 5.5.04, have read the tread you mentioned, but no solution. My problem is that if i try to push a file to the TF than it says "read-only file-system". Tryed in cwr to fix permisions, but no help.
Problem stays the same.
@kokopopz Thanks for your link.
I Found the solution !!!! My TF is UNBricked. YES YES YES.
For the record: "adb push rom.zip /data/media/rom.zip" will do the trick, after that reboot to cwr and do install zip from sdcard.
My t-mobile one s has no os right now. I'm unable to run ruu because my hboot version is 1.14.004, I followed the instructions on how to mount the sd card but it still gave me the same error, I'm going to try to mount the sd card again right now but if that doesnt work then I'm all out of ideas. Any help would be appreciated.
Here is where im at now. The sticky didnt help me access my sdcard so im trying to adb push a rom onto my sdcard but it keeps giving me the eror that more than one device is attached, "adb devices" gives me the same 2 serial numbers but one is offline and the other is in recovery. If anyone can help me please do.
I fixed my previous issue, I'm still unable to push files onto the sdcard, im getting the cannot stat update.zip no such file or directory. I've completely run out of ideas can anyone please help me.
Hi everyone, I downloaded the Fantasy HD rom v11 from http://forum.xda-developers.com/showthread.php?t=2341030 and was very excited to start using it. After rooting my samsung s3 I9300 and installing clockworkmod recovery I copied the downloaded zip file to the my SD card, for some reason it would not copy and kept saying "the device has either stopped responding or has been disconnected". So i ended up putting my SD card into a card reader and copied it that way and it finally copied onto the card. I loaded up recovery mode, selected install from zip and when I click the rom it says something like installing...(bad) and just stops. Please can someone help me with this I dont understand what is going on. I thought maybe the download was corrupt so I redownloaded the file and still wont copy to the SD card although other files copy to it with no error msg. Any help will be very much appreciated
araujo3rd said:
Hi everyone, I downloaded the Fantasy HD rom v11 from http://forum.xda-developers.com/showthread.php?t=2341030 and was very excited to start using it. After rooting my samsung s3 I9300 and installing clockworkmod recovery I copied the downloaded zip file to the my SD card, for some reason it would not copy and kept saying "the device has either stopped responding or has been disconnected". So i ended up putting my SD card into a card reader and copied it that way and it finally copied onto the card. I loaded up recovery mode, selected install from zip and when I click the rom it says something like installing...(bad) and just stops. Please can someone help me with this I dont understand what is going on. I thought maybe the download was corrupt so I redownloaded the file and still wont copy to the SD card although other files copy to it with no error msg. Any help will be very much appreciated
Click to expand...
Click to collapse
can you please give us what cwm says when you try to flash it? all of it is essential.
Please download or check rom weathere the rom is complete.
If its all right then ask the rom developers,other than him none can help as he/they created it..
Sent from my A1 using xda premium
Hello,
Try a different sdcard.
Chears.
Sent from my GT-I9505 using Tapatalk 2
Problem In The Meta-inf aka. Mainfest
Change It
And Check If The Rom Is Complete