Hi all,
Having a bit of a problem right now. I decided to take the jump and flash a custom ROM on my Thundebolt, and settled on GING3R3DTH3ORY V6.2 DKS Rom
In preparation for installing that I downloaded the new 627 radio. Went ahead and flashed it and then rebooted. After the phone launches I have no data or cell connectivity (I can connect to wifi for what that's worth).
Seeing problems I went ahead and tried the MR2.5 radio as well. Still no connectivity. Here are the pertinent entries in Software info:
Baseband Version: unknown
Build Number: 1.13.605.7 CL341545 release-keys
Software number: 1.13.605.7
PRI version: Not Ready
PRL version: Not Ready
ERI version: Not Ready
Running Adrenalyne's Control Freak 2.0 kernel (2.6.32.21)
Current ROM is rooted Stock.
I'd say perhaps it was a bad download, but two different kernels are having problems so I'm slightly concerned. MD5 of the downloaded file is correct.
Any help is appreciated!
Robert
I think 1.13.605.7 is the old radio. Where did you download the 627 MR2?
Was in the XDA thread for the ROM I'm planning to install:
[TH3ORYROM] [GB] GING3R3DTH3ORY V6.2 DreamKernel (DKS) [7/20/2011]
I went ahead and reflashed the radio from when I rooted the Stock ROM and it's working now. However, I'm at a quandry now and where I can get the updated radio from so I can flash the ROM.
Robert
jschecter said:
I think 1.13.605.7 is the old radio. Where did you download the 627 MR2?
Click to expand...
Click to collapse
I tried the link you sent me and the radio download might be bad b/c the md5 is "undefined" for me. Anyway, try this MD5 f38d27c32875778c9b586761d328a455 This is the file I used.
Let me know if it works for you.
EDIT: Baseband should say 1.39.00.0627r, 0.01.69.0625r if you have installed the OTA MR2 correctly.
So do I need to install MR2 before MR2.5? If so, that would be an issue as I went directly from the basic one to 627r.
Robert
jschecter said:
I tried the link you sent me and the radio download might be bad b/c the md5 is "undefined" for me. Anyway, try this MD5 f38d27c32875778c9b586761d328a455 This is the file I used.
Let me know if it works for you.
EDIT: Baseband should say 1.39.00.0627r, 0.01.69.0625r if you have installed the OTA MR2 correctly.
Click to expand...
Click to collapse
So the naming is kinda funny and don't let that trick you. MR2.5 is actually older than this one i just gave you (MR2 627). My link is the most recent thing Verizon has put out.
Just in case you're wondering, here's the story. A radio was leaked to xda and ppl started calling it MR2. A few weeks later another leak came out and ppl called it MR2.5. Verizon or HTC rejected both of these and finally released an official radio version 627 that got sent to every thunderbolt. Now people are calling this 627 one the real MR2.
Thank you soooo much for explaining that. Yes, I was totally confused about what was what.
I'll give the one you linked to a try later when I get home.
Robert
jschecter said:
So the naming is kinda funny and don't let that trick you. MR2.5 is actually older than this one i just gave you (MR2 627). My link is the most recent thing Verizon has put out.
Just in case you're wondering, here's the story. A radio was leaked to xda and ppl started calling it MR2. A few weeks later another leak came out and ppl called it MR2.5. Verizon or HTC rejected both of these and finally released an official radio version 627 that got sent to every thunderbolt. Now people are calling this 627 one the real MR2.
Click to expand...
Click to collapse
I just don't get it! It again returned me the unknown baseband and other notices just like the one I started the thread with using the file you sent me the link on.
MD5 checksum matched OK. I loaded it on my microSD card and named it the correct name. Powered phone off and then held vol down while powering back up.
It boots into the white HBOOT screen and gives me:
Parsing...[SD ZIP]
[1] MDM9K
[2]RADIO_VZ
Do you want to start update?
<VOL UP> Yes
<VOL DOWN> No
I select Yes and it starts the update, with a red progress bar along the upper right side while there's a pink Updating to the right of the items it is updating.
However, when the phone reboots there's no cell or data connection.
Sigh!!
Robert
Sounds like you put the radio on correctly. Have you already flashed the gingertheory rom in recovery?
I gave that a shot a little while ago. Looks like the rooted stock ROM couldn't handle the OTA radio as the Gingertheory gives me connectivity! STRANGENESS!! I actually ended up downloading the latest leaked radio by way of themikmik.com and Cingy51o, but I'm wondering now if the other stuff would've worked too.
Thanks for your help. Still playing around with the new ROM. Not sure I like the lock screen. May just flash to something else in a few days.
Robert
jschecter said:
Sounds like you put the radio on correctly. Have you already flashed the gingertheory rom in recovery?
Click to expand...
Click to collapse
Glad everything worked out for you
Question
I have tried a couple Rom's since rooting my TB. Got stuck a couple times in a boot loop. Do not know what went went wrong, but all has been good ever since... EXCEPT my LTE is weak and sometimes only 3g, couple times 1x. My radio is current and I have gone back to what I understand to my noob knowledge ROOTED MR2. My phone reads-
Android 2.2.1
Base 1.39.00.067r, 0.01.69.0625r
Kernal 2.6.32.21-g060a3a [email protected] #1
Build 1.70.605.0 CL343953 release keys
Software 1.70.605.0
Im still having these issues with my signal. I have read many threads and I thought well I use my LTE for everything... but i just looked only 12gb used and my cycle ends in a few days.. This because of possible throttle by VZW????? I called and asked them to read me in their contract where I as a valued customer would be throttled due to excessive LTE usage. She kinda chuckled and said there is no section and we do not restrict our customers unlike our competitors. I then asked about any know issues with TB's calling in from PHX. NONE
I'm a noob, but I know enough to play and have fun. Now.... Could I have fried something when it got stuck in the boot loop. The boot loop with white HTC screen occurred after a bad rom install on my part. It did it again when messing with DAS MAF settings. I was only able to get it back and running by HBOOT rooted RUU. any insight would help. Don't yell at me for being a NOOB if this problem is in another thread.. THANK YOU ALL... I live to learn new things and with everyone one here being so involved with their passions is AWSOME.. I need neighbors like YOU!
Couple things. First, I'd suggest a new thread as your issue isn't the same as mine and will probably be missed by most people.
Regarding speeds, it might be any of several issues. First is environment. Are the local towers actually upgraded to LTE already? I am in Albany, which is deep in the heart of the LTE San Francisco Bay Area. However, they're having issues with the city in upgrading towers so I bounce between 4g, 3g and 1x when sitting in my bedroom, but a few houses away I get awesome solid 4g!
If your ROM has the option to set which frequency to use (LTE Only vs CDMA/LTE, CDMA Only) try switching to LTE Only.
Did you cook your phone? Probably not. Most phones are a LOT more robust than people think they are. Boot into Clockwork Mod Recovery and wipe cache andbDalvik Cache to see if that's helps.
Good Luck!!
Robert
KonellAZ said:
I have tried a couple Rom's since rooting my TB. Got stuck a couple times in a boot loop. Do not know what went went wrong, but all has been good ever since... EXCEPT my LTE is weak and sometimes only 3g, couple times 1x. My radio is current and I have gone back to what I understand to my noob knowledge ROOTED MR2. My phone reads-
Android 2.2.1
Base 1.39.00.067r, 0.01.69.0625r
Kernal 2.6.32.21-g060a3a [email protected] #1
Build 1.70.605.0 CL343953 release keys
Software 1.70.605.0
Im still having these issues with my signal. I have read many threads and I thought well I use my LTE for everything... but i just looked only 12gb used and my cycle ends in a few days.. This because of possible throttle by VZW????? I called and asked them to read me in their contract where I as a valued customer would be throttled due to excessive LTE usage. She kinda chuckled and said there is no section and we do not restrict our customers unlike our competitors. I then asked about any know issues with TB's calling in from PHX. NONE
I'm a noob, but I know enough to play and have fun. Now.... Could I have fried something when it got stuck in the boot loop. The boot loop with white HTC screen occurred after a bad rom install on my part. It did it again when messing with DAS MAF settings. I was only able to get it back and running by HBOOT rooted RUU. any insight would help. Don't yell at me for being a NOOB if this problem is in another thread.. THANK YOU ALL... I live to learn new things and with everyone one here being so involved with their passions is AWSOME.. I need neighbors like YOU!
Click to expand...
Click to collapse
KonellAZ said:
I have tried a couple Rom's since rooting my TB. Got stuck a couple times in a boot loop. Do not know what went went wrong, but all has been good ever since... EXCEPT my LTE is weak and sometimes only 3g, couple times 1x. My radio is current and I have gone back to what I understand to my noob knowledge ROOTED MR2. My phone reads-
Android 2.2.1
Base 1.39.00.067r, 0.01.69.0625r
Kernal 2.6.32.21-g060a3a [email protected] #1
Build 1.70.605.0 CL343953 release keys
Software 1.70.605.0
Im still having these issues with my signal. I have read many threads and I thought well I use my LTE for everything... but i just looked only 12gb used and my cycle ends in a few days.. This because of possible throttle by VZW????? I called and asked them to read me in their contract where I as a valued customer would be throttled due to excessive LTE usage. She kinda chuckled and said there is no section and we do not restrict our customers unlike our competitors. I then asked about any know issues with TB's calling in from PHX. NONE
I'm a noob, but I know enough to play and have fun. Now.... Could I have fried something when it got stuck in the boot loop. The boot loop with white HTC screen occurred after a bad rom install on my part. It did it again when messing with DAS MAF settings. I was only able to get it back and running by HBOOT rooted RUU. any insight would help. Don't yell at me for being a NOOB if this problem is in another thread.. THANK YOU ALL... I live to learn new things and with everyone one here being so involved with their passions is AWSOME.. I need neighbors like YOU!
Click to expand...
Click to collapse
I've been having the same issue since rooting my TB. Were you able to find a fix?
Related
FIXED.
Go to my post to see what I did!
http://forum.xda-developers.com/showthread.php?p=14498494#post14498494
Ok... The amount of problems I have experienced going from SC Rom, SimpleClean or whatever it was, to Heinz57 is extremely ridiculous... I'm going to skip all that I've done and go straight to the problem. Heinz 57 requires me to have EC10 kernel and radio or whatever. Well being on SC I had EC01. The only thing I found was to go to stock to get EC10 kernel and radio. Well, the very first time I flashed a rom, I was a noob, and forgot to freaking backup my stock rom, so I lost my stock Cellular South rom. In trying to get CWM and all this crap fixed and working, I eventually got Heinz57 installed, but I didn't have Cell Data, you know, like the internet. I could make calls, text, blahblah, but no 3G or anything like that. Then it hit me, this happened when I installed some stock rom that was for U.S. Cellular or some bull, but when I read it, it was for my phone, which is Mesmerize, and it was EC10, and one of the posts in there said it would take everything, even the radio. Well apparently something went wrong, so I'm thinking, why not get the stock rom for US Cellular for 2.1 and then use Kies to upgrade to 2.2, well apparently that's all it did was upgrade it. Because my phone was still US Cellular. Basically I either need the stock rom for Cellular South (2.1 or 2.2). I GUESS? Will that fix my radio? Is there just a radio I can flash with Odin? I've tried some EC10 radio I found in the Facinate forum (For some reason everything in the Mesmerize forum points to the Facinate forum, whatever. Lol), but it didn't do anything. Maybe EC10 just won't work on my phone? Do I go back to EC01 then just say whatever and try installing Heinz on that? I don't know I'm so lost haha. Any help is appreciated. Thanks.
EDIT: Sorry, the radio I flashed was EC01, not EC10.
This one: http://forum.xda-developers.com/showthread.php?t=1029436
EDIT2: So with @davidbruington informing me that I have a Showcase, I tried installing the EB11 files and Radio. No change. Same thing.
CS Showcase should have originally came with DJ20 radio.. I too made the mistake of flashing a Fascinate radio trying to get my TXTs to work with Evil Fascinate rom "awesome ROM BTW". Well I got TXTs working and lost data. Afterwards I have flashed all the Showcase ROMS, even the one with EB11 which supposedly works with the Showcase and data is STILL broke. So something gets changed flashing to a fascinate/mesmarize radio and back. If I knew what to look for I'd open up CDMA workshop and change it back. Anyone have any ideas? I will also add that after flashing to EB11, *228 gives me a programming failure everytime I try.
Both of you are running radios not built for cell south. Go to irc and get help. And stop flashing odin files not for your phone if you don't know what you're doing. Roms don't include a radio, so flashing them isn't going to fix your problem.
Sent from my SCH-I500 using XDA App
Not to mention, if you have cell south then you have a showcase, not a mesmerize. Hopefully that'll help you in the future. They are different, even if just slightly.
Sent from my SCH-I500 using XDA App
This isn't my first goat roping.. I've been flashing phones since the early Nokia days. I'll tell you what there isn't though, I list of radios and what hardware/carrier they are good for. I have a T-Mobile HD2 and soon a G2X and at least in the HD2 thread they warn which radios are ONLY for the T-Mobile variant.. in a RADIO Sticky thread. Can you blame me.. EVERY one of these phones whether a Fascinate, Mesmerize.. or in this case a Showcase "branded as a Galaxy S" all have the hardware model number of SCH-i500! I only found the Mesmerize threads warning of problems AFTER I had convinced myself that the phone in my hand was a Fascinate after searching the model number on google, and the first stop was XDA Fascinate forums. I think XDA needs to invest in grouping the phones better as the list on the main page is growing out of control.. would also help in the confusion and problems such as what I have encountered.
It's not xda's fault you assumed that everything for a fascinate would work for a showcase. A little research would have yielded the obvious answer that no, they are not all the same. Why else would there be separate forums for them? And separate versions of roms for the mes/showcase? Because they are different. And the radios are not universal, which is why you no longer have data. Again, go to the mes irc and they can get you back on track with a showcase flash.
Sent from my SCH-I500 using XDA App
What I am getting at is that ALL of these SCH-i500 model phones shouldn't have their own main thread.. mesmerize, fascinate, galaxy s, showcase, etc etc.. just because carrier X has given them a unique branding name.. hell, I didnt even know this phone was a "Showcase", it says Galaxy S on the back of the cover.. if you look here under galaxy S it has a model of i9000! If the hardware is in fact identical, the main thread should be devoted to it.. such as HTCs code names. Yes.. assumptions are bad but I did do a good bit of research.. it was only until I F'd up and had to search for the problem I was having that even more searching revealed that the phone I had wasn't a fascinate. Now the problem at hand.. the phone isn't bricked, its just the radio flash has changed something.. and even flashing back to a compatible radio didn't change this certain thing back. If it could be changed it should be able to be changed back.
Black6spdZ said:
What I am getting at is that ALL of these SCH-i500 model phones shouldn't have their own main thread.. mesmerize, fascinate, galaxy s, showcase, etc etc.. just because carrier X has given them a unique branding name.. hell, I didnt even know this phone was a "Showcase", it says Galaxy S on the back of the cover.. if you look here under galaxy S it has a model of i9000! If the hardware is in fact identical, the main thread should be devoted to it.. such as HTCs code names. Yes.. assumptions are bad but I did do a good bit of research.. it was only until I F'd up and had to search for the problem I was having that even more searching revealed that the phone I had wasn't a fascinate. Now the problem at hand.. the phone isn't bricked, its just the radio flash has changed something.. and even flashing back to a compatible radio didn't change this certain thing back. If it could be changed it should be able to be changed back.
Click to expand...
Click to collapse
All galaxy s phones are not the same, which is exactly why they have separate forums. You have not flashed a radio that is compatible for your phone because, as I said, roms do NOT include the radio. There is not a standalone radio flash available for the showcase. Your only option to get this fixed is to go to the mes irc chat and get what you need there.
Sent from my SCH-I500 using XDA App
I've been to the mesmerized IRC channel and I have d/l the EB11 Showcase rom which in fact included the radio. It did not fix the data issue. Are you trying to say all SCH-I500 model phones are not the same hardware apart from differing software? Do they have different ram or flash ammounts? From everything I've seen they are identical: 1 GHz Hummingbird Cortex A8, 384 MB RAM, 512 MB ROM... difference ROM/software. As I've said before.. somehow flashing the fascinate radio "EC01" has changed some internal register and flashing back to the EB11 SC radio will not change the appropriate register back. I've seen much harder problems fixed by people of the XDA forum.. just not enough users with SC phones to warrant an investigation by the people who would know how to correct this particular problem.
Sent from my HD2 using XDA App
The hardware is probably identical except the actual wireless transceiver that is built for each carriers network. In some cases, you can use a different radio (the software that operates the transceiver) and it will work. But the problem with any software not written expressly for your device is not the device itself, rather the problem is that the software does not contain the proper id, settings, and configuration for your carrier. That is why everything on xda always carries with it the "at your own risk" disclaimer.
That being said, most of the folks in the irc are experienced devs, who would probably be glad to try and help you remedy the pickle you're in, if you asked nicely. If you go in there with a "this is your fault, fix it" sort of attitude, then you may be **** out of luck.
Do you have to brown nose them? No. But it couldn't hurt. They put up with a lot of **** here, and fortunately they keep providing us new and exciting software to experiment with. For free.
That's my two bits. Do what you will.
Sent from my SCH-I500 using XDA App
I have all the respect in the world for the development.. they make our phones more than just a communicating device but a fun gadget and hobby for some. I'm well aware of the risks for this hobby.. I've had my share of mistakes believe me. Its more a gripe about xda-dev forum than this device.. back when there were only a dozen phones on here it was hard to mistake them apart.. I bought an O2 xda II s because there wasn't a GSM phone like it at the time.. now we have literalle a hundred different model phones and now different branding of the same phone on different carriers.. organization here is critical.. almost overwhelming. My first search gave me a result.. but not exactly the correct information. Cellular south is not large enough to have their own device threads.. I've known that for a long time. The only info I had was it was called a galaxy s and had a model of sch-i500. My search of galaxy s landed a model of i9000.. I knew that was not correct so I figured CS just slapped the name galaxy s on another device.. marketing blah. My next search of the model landed the fascinate device which looked identical so I figured I had it.
Sent from my HTC HD2 using XDA App
Edited the OP
Well, now that we have berated you enough (Lol) lets see if we can help you remedy the situation. So calls and texts work, but no data. Is there a data icon? 3g or 1x?
If you can gain access to the hidden menu you may be able to learn a bit more about whats causing this. At one point my phone (for whatever reason) was stuck in 1x only. I opened the hiddenmenu and changed it to force evdo (3g) waited till it changed to 3g mode, and then switched it back to hybrid.
Sometimes tinkering makes a world of difference. Im not really sure what else to tell you from here... I'm no dev by any means.
Btw, some of the info in the hiddenmenu is generic. For example, I have uscc yet even on a stock rom some of the messaging configurations have crap related to vzw (verizon wireless). If you screw something up, a fresh reflash of the Odin package should set the hiddenmenu options back to default again.
Hopefully someone with more experience than me, who knows all about radios and the like, will step in and direct you further.
Edit: Btw, wolfstar, I'm sorry dude I didn't mean to hijack your thread. My dumb ass didn't pay close enough attention to realize that there's two people in this thread with similar problems...
Sent from my SCH-I500 using XDA App
davidbruington said:
-snip-
Click to expand...
Click to collapse
Not a problem, lol. I did get my problem fixed though. I'm not gonna lie, I have NO idea how, but I did.
To answer your question, no, I did not have 3G or 1x by my signal. Just the signal bar.
To answer how I fixed it, I wish I could tell you guys. I went to the IRC and someone pointed me to a stock ROM which I flashed, and it didn't work. That was an EB11 rom I do believe. Then I did some searching and apparently I found out that no one really has the full stock EB11 rom because the modem would never get fully flashed, and I was like, maybe that's my problem because I went from EC10, which was not supported for my device but for some reason still gave me signal to call people and what have you, to EB11. Well I was like, since there is no EB11 I'll go to the one below which is DJ20. When I did, it didn't work. I was so disappointed. Turned out the DJ20 rom didn't have the modem in it at all, because I check my About Phone menu and I still had EB11 for the baseband. Well I did the *228 just for the giggles, (NOTE: I have been doing the *228 every time I flashed a rom when trying to fix my issue, just to see if maybe it will fix something.) and let my phone reboot. When it turned back on, still no data. This was my last straw, because I had honestly run out of every option I had left. I set it down to think what else there could be to do, picked it back up and unlocked it and BAM, 3G. I have no idea how, or why, but somewhere in what I did it fixed it. Maybe when I went back down to DJ20 and did *228 it downloaded what little bit I was missing in the transition from DJ20 to EB11. It's my only hypothesis.
Thank you guys for all the help. I know you guys didn't have the answers but at least you tried.
ALSO. I did go through my settings with each flash, to make sure they were correct, and they were all on. So I know that my data was on in each flash.
I hope that maybe someone can use this little bit of info one day to either AVOID this or FIX it. Goodluck!
Glad you got it fixed! yeah I remember reading something about cell south demanding its packages removed or something? Apparently they are uberstingy. Anyway, good job and thanks for posting it here for others.
Sent from my SCH-I500 using XDA App
crap.. I could have sworn I too flashed back to a dj20 rom but maybe not. The roms contain APN settings correct? would anything BUT an original Showcase rom in theory not work? It doesnt make sense because even after flashing to the EB11 Showcase rom my data still did not work.. its almost like there is some NVRAM that stores APN settings that must be set by an original flash. Wolf,after you flashed EB11 did *228 give you a failure every time you tried it?
Black6spdZ said:
crap.. I could have sworn I too flashed back to a dj20 rom but maybe not. The roms contain APN settings correct? would anything BUT an original Showcase rom in theory not work? It doesnt make sense because even after flashing to the EB11 Showcase rom my data still did not work.. its almost like there is some NVRAM that stores APN settings that must be set by an original flash. Wolf,after you flashed EB11 did *228 give you a failure every time you tried it?
Click to expand...
Click to collapse
No, every time I did *228 it was always successful and it would reboot my phone, but even after it rebooted it was still the same. Check your About Phone and see if you have the EB11 Baseband, if you, try what I did and get the DJ20 ROM and do the *228.
I can gladly say that I still have 3G/1x with no problems.
I want to return to stock on my tmobile branded HTC sensation 4G. I have flashed the radio, eng s off, and CSL recovery.
I am going to give them a shot at fixing my reception issues before I destroy the phone and buy something else.
Did you have reception problems before flashing your radio or after? I think you should be fine with having a rom since HTC released their bootloader if its a big deal and your really worried just flash a stock rom on that bad boy and call it a day. Just my 2 cents new to the site so hopefully a vet will chime in here for help
Though I've never returned to stock on my phone, you just need to download one of the TMOUS RUUs in this thread:
[ROM][11 May] Shipped Pyramid ROM Collection
There are two listed for TMOUS (there was only one when last I checked the thread), but it supposedly doesn't matter which one you pick according to one of the posts later on in the thread.
They're big old files, but just run the .EXE and it ought to walk you through every necessary step to proceed properly.
Good luck, and let us know how it goes!
Thank you very much for the great responses.
Yes I had reception problems on all 3 sensation 4g's I've had my hands on. It's terrible. Side by side, on the same tower, it gets far lower reception than my old Motorola Cliq (piece of slow crap.)
It's ridiculously low and drops calls. It's so unreliable at my house that I have to use WiFi calling and take a drop if I get more than 30' from my extremely good wireless router. meh. crap.
To the other gentleman, than you very much. I figured it included the radio, but I was unsure about the bootloader/recovery. I will start there and then figure out if there is anything else I need to fix before I send it in. I don't want any more BS from them. I'm sure they are just going to send it back and say "nothing is wrong".
They have said that it is comparable to reception on their other models. If this is the case, this will be the VERY last HTC phone I ever own, and our company has just gotten to the point that I can invest in things such as this for business. If we only get 2 at a time, every 6 months or so, That is $10,000 in lost business in the next ten years, provided they are only $500 phones.
chisleu said:
Thank you very much for the great responses.
Yes I had reception problems on all 3 sensation 4g's I've had my hands on. It's terrible. Side by side, on the same tower, it gets far lower reception than my old Motorola Cliq (piece of slow crap.)
It's ridiculously low and drops calls. It's so unreliable at my house that I have to use WiFi calling and take a drop if I get more than 30' from my extremely good wireless router. meh. crap.
To the other gentleman, than you very much. I figured it included the radio, but I was unsure about the bootloader/recovery. I will start there and then figure out if there is anything else I need to fix before I send it in. I don't want any more BS from them. I'm sure they are just going to send it back and say "nothing is wrong".
They have said that it is comparable to reception on their other models. If this is the case, this will be the VERY last HTC phone I ever own, and our company has just gotten to the point that I can invest in things such as this for business. If we only get 2 at a time, every 6 months or so, That is $10,000 in lost business in the next ten years, provided they are only $500 phones.
Click to expand...
Click to collapse
If I may be so bold as to make a suggestion and ask a few questions....
1. Have you tried reverting to stock and see if you still have the same problems with reception?
2. Are you aware that the Sensation suffers from the grip of death?
3. Have you noticed performance with reception after flashing a new ROM in comparison to stock?
I think I may have some insight to the real problem but need this info first.
mystikal87 said:
If I may be so bold as to make a suggestion and ask a few questions....
Click to expand...
Click to collapse
Best 3 Stooges voice: "Sauwtainly"
mystikal87 said:
1. Have you tried reverting to stock and see if you still have the same problems with reception?
Click to expand...
Click to collapse
Yes, They (3 different phones) had this problem from day 1. Purchased from different places, at different times.
mystikal87 said:
2. Are you aware that the Sensation suffers from the grip of death?
Click to expand...
Click to collapse
Yes, but this isn't to what I refer. Holding the phone in a weird way to make the radios D/C isn't my problem so much as the design that allows this to happen in the first place is my problem. If I set the phone down, I get more bars than if I hold it normally. If this is the difference between 2-3 and 1-2, I can get dropped calls. My wifi range (max performance on) is 1/10th of my tablet and 1/20th of my laptop.
Even without touching the phone, just setting it on a wood counter top, it has less reception than my Motorola Cliq or Mytouch 4g, even when on the same tower. The cliq's reception does not change if I pick it up.
It's a bad design. If it is what HTC considers acceptable, then their phones aren't acceptable to me. It's cool. I'm not really that pissed about it. I just won't buy another. There are options.
mystikal87 said:
3. Have you noticed performance with reception after flashing a new ROM in comparison to stock?
Click to expand...
Click to collapse
No, I've found no increase in reception with any change I've made. I've flashed 5 different radios other than stock with no changes in this department.
I have heard people have speed changes, but I was not tracking that so I can't really respond to that.
mystikal87 said:
I think I may have some insight to the real problem but need this info first.
Click to expand...
Click to collapse
Hope you have some help.
I've already tried a new back. It did nothing. There simply aren't enough towers in my area (all edge towers anyway) to support a phone with such poor reception. My Cliq had no issues with dropped calls in many of the areas I drive through, but this sensation just can't make it down my parents road without dropping.
The reason I ask is that I think that the Radio-Interface-Layer (RIL) files must be screwing with your radio. The RILs are like drivers for your radio. Different radios work with different RILs depending on your location. Long-in-short-version, Since the Sensation is fairly new, we are still exploring what works best and therefore your mileage may vary.
You may want to check this thread
And check out your RIL version. To check to see what RIL you have run getprop "gsm.version.ril-impl" in Terminal Emulator or adb shell and it will print out the RIL version.
T-Mo users should utilize HTC-RIL 2.2.0159HMQ if not running 2.3.4 ROMS
2.3.4 ROMS require HTC-RIL 2.2.0169HMQ. The matching radio versions are included in the thread posted above.
Hope this helps.
If that fails, tonight, TMOUS released an OTA update. See if you can get it through Settings-> About Phone -> HTC Software updates.
The changes for the T-Mo update can be found here
Hope this helps!
EDIT : I am assuming that you have a T-Mobile Sensation 4G and not an unbranded HTC Sensation and that you current location is in fact Myrtle Beach, SC. But then again, I hate assumptions and I really should have asked >.< **having a simpson 'doh' moment here**
Change your cid to all ones and flash the stock ruu.exe and send it back to tmobile.
Sent from my HTC Sensation Z710e using XDA Premium App
charlieb620 said:
Change your cid to all ones and flash the stock ruu.exe and send it back to tmobile.
Sent from my HTC Sensation Z710e using XDA Premium App
Click to expand...
Click to collapse
I'm sending it to HTC, not tmobile.
I will play with the MILs right now (installing the tmo one)
I'm on stock RUU now, but it did not replace the PVT S-OFF and recovery crashes and requires a battery pull to reboot. It goes to a icon of a phone with a red triangle thingie on it.
EDIT: MIL's match.
EDIT: Texts from 10076200000 is tmobile related. WTF it does is WTF.
chisleu said:
I'm sending it to HTC, not tmobile.
I will play with the MILs right now (installing the tmo one)
I'm on stock RUU now, but it did not replace the PVT S-OFF and recovery crashes and requires a battery pull to reboot. It goes to a icon of a phone with a red triangle thingie on it.
EDIT: MIL's match.
EDIT: Texts from 10076200000 is tmobile related. WTF it does is WTF.
Click to expand...
Click to collapse
Could be trying to push the OTA update. Have you tried applying the OTA update?
iNFORMATION
I have personally reset my phone a couple of times using the tmo ruu and know that it sets your phone back to absolute stock, with no root and only being s-off. What this means is, if you wish to reroot then you are going to have to go back through the rooting process.
As far as the symbol that you are seeing when you try to do an ota update? The reason that you are seeing the phone with a red triangle is because your phone is being recognized as being rooted and once rooted htc will not allow an ota to your phone. You have to trick HTC into thinking that the phone is not rooted in order to get the ota, there is a thread in the forums for this. I do not remember which thread it is, however, I know that it works as I did it for all four of the HTC sensations that I own.
Hi,
Sorry I've been away for a few weeks. I used to follow these threads like a hawk but I just got too busy with a huge dev project that ate my life like they can sometimes do... I read through threads about rooting 1.85 and unlocking...But I'm just confused. Sorry if this is redundant but...
I'm currently on 1.74 (if I'm reading that right, 1.73.502.1 710RD ... oddly enough I tried to update but it didn't let me... assuming that annoying message I kept declining for days was the 1.85 update).
Now I could go to check for updates again but I'm not. I figured I better ask around and see what the best course of action is.
I rooted a while ago when it was first available. So I have root.
So that's where I'm at. Now, my question is what's the best course of action?
Am I not able to update OTA to 1.85? Because I already rooted?
If I can check for updates and get the update, will it remove my root?
The last post in the 1.85 root thread says that they may have fixed their servers to avoid rooting 1.85??
Can I just now unlock my phone and flash ROMs? and not worry about carrier updates?
Is there anything I'm missing with the 1.85 update? That I couldn't get elsewhere?
I may or may not flash a ROM. I just don't want to be prevented from doing so if I want. HTC's Sense is not crashing like it used to, so I have no major need to flash a ROM yet... Improved performance would be the only reason. Maybe some development reasons as well.
Opinions?
Thanks much. I appreciate the help.
crap this isnt under general is it...
tom_m said:
crap this isnt under general is it...
Click to expand...
Click to collapse
Haha no it's not. Also, it should be under Q&A.
You can go ahead and unlock and flash a custom rom. There's no need to get the OTA (which would most likely make you go through the rooting process again). Since your'e already rooted pre-1.85 you can flash a rom and guarantee that you'll retain your root status.
:laugh: Suffer the wrath of trolls.
Nah, I would download the 1.85 firmware update RUU [ran from your computer to install instead of OTA] and root [SOON] or root / unlock bootloader / install custom recovery then flash a new rom. First idea for a rom would be CleanROM. If all you want is root status, I would start there because It gives you basically a clean slate with bloatware removed and some minor tweaks I believe. Otherwise you could use CM9 or one of the few other roms that you may like. Personally I get the best performance out of KingCobra's rom. So idk :b
Gotta add my two sense for unlock and flashing Sick Sense. Very smooth.
Sent from my HTC One X using Tapatalk 2
Thanks guys, sorry again for misplacing this post.
I think I might browse the ROMs then. I didn't realize there were already so many options. I thought the 1.85 update may improve my issues with the signal being lost...I have to turn on airplane mode and off again to reconnect to their network despite the 4G (and sometimes LTE) icons showing up the whole time...But I'm just thinking I'm unfortunate in that my apartment has poor signal. Though my wife's iPhone works just fine...Oh well.
Thanks again. Time to check out some ROMs. I definitely don't want to grab some update and get locked out of it all.
my vote goes to scott standard clean rom! it has eqs, and a couple other little tweaks, that way u can add whatever u want!
tom_m said:
Thanks guys, sorry again for misplacing this post.
I think I might browse the ROMs then. I didn't realize there were already so many options. I thought the 1.85 update may improve my issues with the signal being lost...I have to turn on airplane mode and off again to reconnect to their network despite the 4G (and sometimes LTE) icons showing up the whole time...But I'm just thinking I'm unfortunate in that my apartment has poor signal. Though my wife's iPhone works just fine...Oh well.
Thanks again. Time to check out some ROMs. I definitely don't want to grab some update and get locked out of it all.
Click to expand...
Click to collapse
I have had the same issues with data and have had my phone swapped twice because of it and the 1.85 update nor any of the other radios has made any difference so I would just unlock the bootloader, flash a custom recovery and then rom of choice.
tom_m said:
Thanks guys, sorry again for misplacing this post.
I think I might browse the ROMs then. I didn't realize there were already so many options. I thought the 1.85 update may improve my issues with the signal being lost...I have to turn on airplane mode and off again to reconnect to their network despite the 4G (and sometimes LTE) icons showing up the whole time...But I'm just thinking I'm unfortunate in that my apartment has poor signal. Though my wife's iPhone works just fine...Oh well.
Thanks again. Time to check out some ROMs. I definitely don't want to grab some update and get locked out of it all.
Click to expand...
Click to collapse
There is a new radio that should fix that stuff. Lemme find it. Here ya go. the latest ATT at the bottom. ATT 2.09 (0.17a.32.09.24_2_10.91.32.19L http://forum.xda-developers.com/showthread.php?t=1694012
This should help wifi and mobile data. I also replaced a phone because of the mobile data issues. New phone did it also. Once i installed 1.88 ruu it was all fixed. You dont have to install the ruu now. Just pick your favorite custom rom and then flash this radio. The radio from 1.88 fixes it also but its from an asia ruu,. This new ATT radio is promising, i'd go with that.. Thank Designgears for that leak
Clean rom is good. Sick Sense as well as King Cobra. I'm rockin the new king cobra 1.2 and its pretty amazing. Any of these roms will be much much much better than stock. Tons of great mods, Speed and stability is great with all of them. You will think your CPU speed doubled..No lies! Install Titanium Backup (purchase it) and back up all of your apps. If you get the paid version, you can restore them all to your new rom 1 touch. The free version you have to do each app 1 at a time.
Edit. Of course you are rooted. But did you unlock the BL through HTC Dev also? If you mentioned it i must have missed it. If not you need to do that first.
nugzo said:
There is a new radio that should fix that stuff. Lemme find it. Here ya go. the latest ATT at the bottom. ATT 2.09 (0.17a.32.09.24_2_10.91.32.19L http://forum.xda-developers.com/showthread.php?t=1694012
This should help wifi and mobile data. I also replaced a phone because of the mobile data issues. New phone did it also. Once i installed 1.88 ruu it was all fixed. You dont have to install the ruu now. Just pick your favorite custom rom and then flash this radio. The radio from 1.88 fixes it also but its from an asia ruu,. This new ATT radio is promising, i'd go with that.. Thank Designgears for that leak
Clean rom is good. Sick Sense as well as King Cobra. I'm rockin the new king cobra 1.2 and its pretty amazing. Any of these roms will be much much much better than stock. Tons of great mods, Speed and stability is great with all of them. You will think your CPU speed doubled..No lies! Install Titanium Backup (purchase it) and back up all of your apps. If you get the paid version, you can restore them all to your new rom 1 touch. The free version you have to do each app 1 at a time.
Edit. Of course you are rooted. But did you unlock the BL through HTC Dev also? If you mentioned it i must have missed it. If not you need to do that first.
Click to expand...
Click to collapse
I still have data issues even with the leaked radios.
Tiffany84 said:
I still have data issues even with the leaked radios.
Click to expand...
Click to collapse
What kind of issues? :crying: the same as before? they completely went away for me.:fingers-crossed: Have you seen anybody else still having issues with 1.88 or newer? Maybe you actually have bad hardware..coincidences happen.. I'd swap again if the new radios are working for most others. You paid to much for that phone for it to be poopoo.
nugzo said:
What kind of issues? :crying: the same as before? they completely went away for me.:fingers-crossed: Have you seen anybody else still having issues with 1.88 or newer? Maybe you actually have bad hardware..coincidences happen.. I'd swap again if the new radios are working for most others. You paid to much for that phone for it to be poopoo.
Click to expand...
Click to collapse
Well, I've swapped it 3 times now. The first one I do not remember having that problem. Not saying it didn't but I can't remember. I returned it due to random reboots. Other than that the 1st one was flawless. Ever since then the phones I've received and have swapped have an issue where if I got into work where I have a hard time getting a signal the phone doesn't automatically re-connect when I go outside and have great signal. Even though it shows I have 4g and full bars if you look in the settings menu at mobile network it says turning on instead of connected and the only way to be able to make or receive phone calls or text messages is either toggle airplane mode or reboot the phone. Problem now is I'm past my thirty days so it would probably have to be done threw the warranty and not an in store swap.
First off i want to thank you guys for all the help i've received for my various phones over the years, usually there is a thead for anything i need but i cant find anything on revol wireless.
I recently flashed my 2 S3's from verizon to revol(which i believe is like cricket?) my phone was rooted stock 4.1.1 vrblk3 my girl's phone was not rooted. my phone was done first, at revol the used houdinisoft to flash, passed first time no problems, make calls have internet and they put a houdinimms app on for picture msg. it didn't seem to work so i removed it but now mms doesn't seem like it wants to work most of the time, but my phone (mostly) works...
After using the service for a few days and seeing coverage was ok we decided to flash her phone went to the store and there was a different person there(big shock, I know)but she didnt really know what she was doing i suspect, anyway she tried and tried and kept getting fail after fail, called tech support after an hour and a half my daughter was restless and hungry and we had other errands to run so we left the phone and came back later. when we got back she said she got it, and just had to do a system update to get the internet working, COOL! well another hour goes bye and she gives up and says i should come back monday when the manager is there... i was just wondering, is there a better way to flash to a different provider? i have ODIN im comfortable flashing roms been doing that for years! i know I need a good PRL list, but short of that im stuck any help would be GREATLY appreciated!
NickleWound said:
First off i want to thank you guys for all the help i've received for my various phones over the years, usually there is a thead for anything i need but i cant find anything on revol wireless.
I recently flashed my 2 S3's from verizon to revol(which i believe is like cricket?) my phone was rooted stock 4.1.1 vrblk3 my girl's phone was not rooted. my phone was done first, at revol the used houdinisoft to flash, passed first time no problems, make calls have internet and they put a houdinimms app on for picture msg. it didn't seem to work so i removed it but now mms doesn't seem like it wants to work most of the time, but my phone (mostly) works...
After using the service for a few days and seeing coverage was ok we decided to flash her phone went to the store and there was a different person there(big shock, I know)but she didnt really know what she was doing i suspect, anyway she tried and tried and kept getting fail after fail, called tech support after an hour and a half my daughter was restless and hungry and we had other errands to run so we left the phone and came back later. when we got back she said she got it, and just had to do a system update to get the internet working, COOL! well another hour goes bye and she gives up and says i should come back monday when the manager is there... i was just wondering, is there a better way to flash to a different provider? i have ODIN im comfortable flashing roms been doing that for years! i know I need a good PRL list, but short of that im stuck any help would be GREATLY appreciated!
Click to expand...
Click to collapse
Start here:
____________________________________________________________________
ALLINONE TORRENT (root and flash):
____________________________________________________________________
UPDATED TOOLKIT v.1.2:
http://z4cellforums.webs.com/apps/f...twork-toolkit-boost-revol-pageplus-ect-?next=
Removed rooting files!
Added:
QPST_2.7.422
Dfs tools 13.9.29.0
Qxdm 3.12.714 (same)
Cdma workshop Demo 3.9
Updated PRLs
OLD TOOL KIT!:
Allinone torrent Download (torrent): NEW ABOVE
Included's:
Root and unrooting file:
Samsung S3 Toolkit
Flashing Software:
QXDM 3.12 Build 714
QPST 2.7 Build 366
CDMA WORKSHOP 2.7 + Demo
DFS 4.3.1.0
Z4cell app (support us)
Okay lets start from the beginning.... about a year ago I switched to Verizon ONLY so that I can get 4g as they have the best 4g in my area. (Detroit). I loved it at first...smoking hot 4g almost everywhere I went. When my home internet went out I could tether to my phone... life was good. Sometimes when entering a building I would drop to 3g but my desk and PC are by a picture window so I always had 4g to tether with.
Then came that update a couple months ago.. don't remember the update number but it was the one that was pulled. Every since then I can only get 4g when I am in a prime area outdoors near a tower. This makes the phone almost worthless to me because I use it to play an online game and surf the internet at work, not to mention I no longer have a backup connection for my PC... without 4G I might as well be using a cheap flip phone. I have 3 S3's on my account and they all show this same behavior change.
I have tried changing the sim card.. flashing many different radios and am currently running Jelly Beans build 15 ROM to see if a different ROM might help. (I am rooted and unlocked) So far nothing has helped.. I have also tried having my SIM reprovisioned.
I ran across this thread http://forum.xda-developers.com/showthread.php?t=1530203 in the HTC forums discussing hardware antenna mods and even some success claimed and was wondering if anybody has experimented with this with the S3??? I have already had the phone apart looking for ideas but I am afraid this is out of my league without some assistance.
Also while sitting in the house I still get good reception based on DBM, currently at 82 as I type this with only a 3G signal and even drops to 1x on occasion, So what is the deal with being able to get 4g outdoors with a lesser signal while only 3G while indoors?? Toggling airplane mode and other tricks I have tried will not get me 4g indoors.
Now... if it came down to it can I give my current phones a try on AT&T to see if that helps anything? Also does anybody remember what radio firmware we where on before the OTA of death?? I may have missed a radio or two in my testing,
Any advice, opinions, suggestions... any input is appreciated. I am somewhat OCD so I will not rest until I resolve this issue or switch carriers.
Thanks in advance.
OK I don't know if I missed it but do you have a custom recovery ? If so flash a different radio and see which does your phone like . invisiblek has all in one packages that are easily flashable . charge your phone and don't interrupt the process . try md3 radio .
jmichaels1982 said:
OK I don't know if I missed it but do you have a custom recovery ? If so flash a different radio and see which does your phone like . invisiblek has all in one packages that are easily flashable . charge your phone and don't interrupt the process . try md3 radio .
Click to expand...
Click to collapse
Been down the list and installed them all last night... took me hours because I wanted to test each radio for a few min before trying the next. Just got off the phone with verizon and samsung 3 way call, samsung will repair the phones if I send them in, but I would be without phones for about 2 weeks,,, damn.
Update.. don't know if it will help but I filed an FCC complaint. Don't know how well it will work but Sprint bent over backwards over FCC complaints.
Which firmware package are you using. Mf1 was the one sent out to fix md3 or whatever that botched one was. Mb1 was the one before that I think. Just flash the mb1 firmware. You can also flash the mf1 firmware. Filing a FCC complaint is a bit extreme for something you can fix by flashing a new firmware package.
Sent from my GT-P5113 using xda premium
bbqsfire said:
Which firmware package are you using. Mf1 was the one sent out to fix md3 or whatever that botched one was. Mb1 was the one before that I think. Just flash the mb1 firmware. You can also flash the mf1 firmware. Filing a FCC complaint is a bit extreme for something you can fix by flashing a new firmware package.
Sent from my GT-P5113 using xda premium
Click to expand...
Click to collapse
I am currently using MB1 along with the associated rpms on the jelly beans rom. MF1 never solved anything for me, except reduce the overheating and battery life a little. All 3 of my phones are pretty much garbage now. From what I am hearing the bad update put some phones in a non repairable status.
A possibly unrelated issue is that my phones seem to be a different version than most.... I have watched many S3 teardown videos... and in every one a small screw was used to hold the sim card/sd card slot into place. My phone has no such screw nor a place to put one... the assembly just snaps into place and is held in by the surrounding hardware. I think I may have a very early release of the phones.. all 3 are 32 gig models and from what I understand they didn't sell very well on verizon, last time I checked they had quit even listing the 32 gig option.
I have tried to exhaust all options before complaining to the FCC. One thing I would like to play with some more is APN values but have had very little luck because it always reverts back to the same APN and if I try to force anything I get no data at all.
I am also willing to void the warranty one one phone by trying internal antenna mods but I cant do this alone and there seems to be nobody here that has tried it . At the very least the wifi antenna looks easy to mod... just spiral some copper wire around it and spay it with some kind of non conductive coating should help a little. and that ridiculous thermal pad to keep the cpu cool should be trashed and replaced with copper shims and quality thermal paste.
While there is not a lot of room inside for modding I think we could make some small changes that will help.
With the lack of phone hardware modding support on cell phones in general I will probably jump ship to a S4 since it comes in a 32 gig flavor..and I intend on trying an AT&T sim in the phone to see how it performs there.
My wifes phone that has never been modded/rooted/unlock and is on the latest update is much worse than mine... she is stuck in 1x mode most of the time and cant even download her voicemail without a long struggle.
We are in a prime LTE area so there is no excuse for this.
My Mf1 firmware actually gave me more bars and a faster connection. That is to bad it messed up your lte.
Sent from my GT-P5113 using xda premium