greetings!
Just recently i got a Motorola Defy, and to be honest the top power button seems a little wimpy.
i have downloaded two apps so far to circumvent the power key;
Tap Tap App and Fix Broken Power Button.
the following problems occur when attempting to power the phone down.
In Fix Broken Power Button the widget is completely inoperative.
in Tap Tap App the screen will flash dark, then immediately come to the lock screen.
i believe this has to do with the Defy's internal workings, and have seen other people have similar problems,
see http://forum.xda-developers.com/archive/index.php/t-1017269.html
is there hope for my phone?
thank you.
Related
As it is tweaked right now, pressing the rigth button is shutting the screen down, yet not locking the device, which is v. convenient.
However, sometimes I need to lock it, which right now is only accesible via start --> lock. So, what I am looking for is a way to lock the devide by pressing the right button twice (e.g. once only shuts it down, two locks it).
Can you help me?
If you leave it with the screen off for a while, it automatically locks..
tozzy said:
As it is tweaked right now, pressing the rigth button is shutting the screen down, yet not locking the device, which is v. convenient.
However, sometimes I need to lock it, which right now is only accesible via start --> lock. So, what I am looking for is a way to lock the devide by pressing the right button twice (e.g. once only shuts it down, two locks it).
Can you help me?
Click to expand...
Click to collapse
It sounds like you've got the known issue where the end-call button does not lock the device.
It SHOULD do that - there's a fault that stops it happening.
After doing Start, Lock, the lock button will then lock the screen, as well as turning it off.
If it doesn't then I suggest you have some software on your phone that has altered what the button does.
Use AEBPlus - keyboard remap program - it's free.
For every one button you can assign action for single, double, triple and long keypresses.
In your case assign "Lock" for double press on red phone button.
I hope that this can help you.
[★] said:
If you leave it with the screen off for a while, it automatically locks..
Click to expand...
Click to collapse
thats useful LMAO
johncmolyneux said:
It sounds like you've got the known issue where the end-call button does not lock the device.
It SHOULD do that - there's a fault that stops it happening.
After doing Start, Lock, the lock button will then lock the screen, as well as turning it off.
If it doesn't then I suggest you have some software on your phone that has altered what the button does.
Click to expand...
Click to collapse
Yeah I'm pretty sure it was some of BsB Tweaks' tweaks, dunno which tho, however I find it quite useful as it is. Will check out AEBplus, thx.
Hello people
New to android programming and I would like to create an app that runs when the power button is pressed (the phone will already be 'on' as such but the screen 'off')
so - one press of the power button to 'activate/show' the screen will make the app run (without requireing the user to unlock the screen please).
is this possible
how do I capture the 'power button press' event and then direct it to run *app xxx*
I thank you for your time in lookin at my question and I sincerely hope I can also one day help others (I have a fairly extensive history online of helping people with windows and hardware issues)
Hello,
I've been using my new note 2 for two weeks now.. and I like it so much
I also used sgs2 and 3 before.
I'm not new to android.. I flashed roms, know every single setting in the device, rooted my sgs2 and tried lots of apps to customize them.
Regarding my issue, I like to set my device to none screen security because I always manually lock it with a press on the lock screen button after I do whatever I want to do with it, and to unlock I always press Home button to get back to where I was immediately without the need to swipe the lock screen.
The problem is when I lock it and there is an app running and then press the home button the screen goes to home default screen and do not just unlock the screen and keep it there where I was last, this was not the case with my sgs2 or sgs3.
If I press the lock screen button instead it does what I want but I prefer to use home button because its much easier.
Its not a big issue but its annoying sometimes because sometimes I get popup notification windows while the phone is locked (whatsapp for example) and I press the home button to see it and instead of just turning on the screen to see the window it goes back to home screen and the popup is gone, or in cases where I'am writing an email or reading something and meanwhile talking to somebody, if the screen gets locked, If I press the home button everything is gone. So I have to switch tasks to open my activity again.
I don't know if this is a jellybean issue or hardware (homebutton).
I know its not a big deal but I would appreciate if somebody can help get around this
Sent from my GT-N7100 using xda premium
Hello all,
Recently the power button on my Nexus 5 has been acting really weird. Sometimes it works flawlessly, others it requires pressing it really hard to work. In order to prevent it to stop working indefinetely, I am looking for a way to remap my volume-up button so it can work as a power button. I don't need it to turn my phone on or to work in the recovery mode (from what I read, it seems to be impossible), only when Android is running.
I've already tried some workarounds:
1) Volume Unlock Power Button Fix app: I tried it, but it just allowed me to turn on my phone with volume but not turning off. Also, it drains a LOT of power.
2) Buttonremapper app: It would theoretically do exactly what I wanted, but did not work at all.
3) Editing generic.kl: I tried switching volume-up and power buttons codes in generic.kl, but also did not work. Maybe I need to modify another file?
3) Xposed Framework + Additions: The installation of Xposed went Ok, but after installing Additions module I got stucked in bootloop. I am running Android 5.1 stock, maybe this module is not yet compatible.
So, can anyone help me? Do I need to install a custom ROM?
PS: I live outside US, so no warranty for me. Otherwise I would just use it
Thanks in advance for any help!
Cheers,
Humberto
Hi folks,
Just a heads up for anyone who might be facing the same issue. I decided to change from stock to Cataclysm ROM due to some specific features (listed below). After the installation, here's what I did to work around this problem:
1) Enabled "Volume wake" and "Sleep button on status bar" in "Cataclysm Settings / Miscellaneous".
2) Enabled "Swipe to sleep" and resized NavBar to 115% in "Cataclysm Settings / Navigation bar options". -> This way I can swipe in NavBar at any time (except lockscreen) to turn off screen. I raised it a little to facilitate the swipe gesture.
3) Changed Lockscreen Dialer shortcut to ""Turn off Screen" app shortcut (just search for it in the play store) in "Cataclysm Settings / Lockscreen options" -> This allows me to just swipe right and turn off the screen when my security settings are disabled (which accounts for most of the time). I found it way faster than pressing sleep button in status bar, especially when I'm driving and I can't look at the screen. Plus, I don't really use the dialer function of my phone so often since the invention of Whatsapp ;P
I realize this is not the perfect solution, but I don't see a better way to deal with this power button malfunction problem (except from a hardware fix).
Hope this helps!
Cheers,
Humberto
PS: I am really enjoying Cataclysm. It's a very nice ROM, completely stable and with a lot of other interesting features aside from the ones mentioned above. I strongly encourage anyone to give it a try!
I'm facing the exact same problem but I really need to eliminate the power button or I will need a power button fix soon.
The solutions you found hthiengo are good if not needing to turn off (or worst: running out of battery, something that happens me sometimes). I'm in the situation that next time I hit power button I will need to replace the button, or throw the nexus away
I did installed the xposed additions for lollipop but it is not working, and the Cataclysm trick is not enough in this case
Ok, after some research I've found a temporary solution:
For the power button you can remap modifying the file gpio-keys.kl under system/usr/keylaout (i wonder why anyone could figure out thise before, no that difficult). I would like to map power button leeaving it useless but I've found it impossible to remap the power button (probably because the key number is not 116). I would have liked to see xposed additions to help me map the keys but is not functional at least for me.
If the phone runs out of battery I've found that if I plug the power cable by pressing both volume buttons at the same time, eventually it starts up with the bootloader so I can plug the pc cable and it will reboot sucessfully.
So despite the phone know is pretty disfunctional (not the best phone for a hurry without battery), I can still use it for some weeks before I plan buying a new one or something (or I find a place for reparing). Its a shame I could not find a better solution for example, ADT when powered off so I could just reboot it by using ADT reboot command while powered off.
And It would be really amazing if the volume up button could also power it on from the powered off state.
In my case the power button is broken, but sometimes it gets stuck and puts the phone in a reboot loop: To avoid pressing the power button accidentally I've made a hole in the protective case so its pretty difficult to access it.
That's all for now. If anyone can make it better I will be glad to hear him/her
hey guys, i noticed today that sometimes when i press the home button to wake the phone it doesnt react...when i press it again it works normally....this happened to me two times....did anyone see this?
That sounds like a hardware issue. The home button synthesize sensor must not be recognizing the pressure you are applying to the button. Did this happen after a software update?
I'm having the same issue with the home button being super spotty and straight not registering when I push the home button. This is super irritating. I constantly have to press the button and sit like an idiot while it does nothing, then press again.
LTE-X said:
That sounds like a hardware issue. The home button synthesize sensor must not be recognizing the pressure you are applying to the button. Did this happen after a software update?
Click to expand...
Click to collapse
i only noticed this today...and yes 2 days ago i have done an OTA update....
I have a Verizon version running 5.0.2
i tried now to see if this is happening when i am pressing the sides of the home button...and yes...it looks like sometimes i press the sides thats why it doesnt work....but the thing is my home button is a bit loose...so its easy to hit the sides...
I had the S4 and the Note 3. Never had a problem. If I press the button and it clicks it should work.
hajyihia said:
i only noticed this today...and yes 2 days ago i have done an OTA update....
Click to expand...
Click to collapse
Hmm that could be a number of things. It could be the hardware. It could be the update that you've installed that is causing wake lock on the device. Since your phone is covered by the one year limited warranty, I think you should contact Samsung and request an exchange/replacement. You can, however, try a factory reset to see if the wake lock problem goes away.
Ok I've been able to replicate the problem 100% if I choose. It is most definitely a hardware problem. If the home button is pressed on the left corner of the button it fully depresses and even clicks. But it doesn't register as so.
Definitely a hardware issue.
My phone had this issue as well where it wouldnt register soft clicks or off center taps and I would regularly get missed presses when using the phone (unless I pressed the button hard). I had verizon send me a replacement. The new phone just showed up, and the home button works almost perfectly. I can still get it to not register if I try really hard to push extremely lightly, on the very edge of the button with my finger nail, but its easily 100x better than the previous one.
The new button is also almost silent while the old one made kind of a cheap plastic click sound like it rattled slightly. It also feels like it requires a tad less force to press than the old button. The old button I could easily recreate the issue 100% of the time by just pressing lightly or pressing off center and it would regularly bother me while using the phone.
Buttons don't work
Front buttons stops working, then i reset phone they work some time and again stoped everything else work fine.
I have warratny but from shop they sadi that buttons working i don't now what to do pls for help.
Krizatata said:
Front buttons stops working, then i reset phone they work some time and again stoped everything else work fine.
I have warratny but from shop they sadi that buttons working i don't now what to do pls for help.
Click to expand...
Click to collapse
Here is a "solution" that has worked for me. My S6 is the Verizon variant, but I think these steps will work on any Service Provider.
Settings > Accessibility > Dexterity and interaction > Assistant menu
From here, toggle the switch to "ON". This will create a hovering circle with a window with four panes inside it. If you interactive with the hovering circle it will open a new window in which you have access to the back and recent apps buttons via an onscreen button.
Not sure what has disabled the hardware buttons, but this should give you access via onscreen software.
I know it's not a true fix, but a work around.
If someone finds a true fix, please post it! But in the meantime ...
I hope this helps!
Hello,
I had a S6 and after 4 days I noticed loose home button: it made noise the tap on it (not press). And also didn't registered clicks on the left side.
I exchange it for another and this one is almost perfect. I notice the left side of the butto to be a bit pressed. Anyway, I suspect a harware issue.
Lollipop 5.1.1
This video worked for my GS6
hajyihia said:
hey guys, i noticed today that sometimes when i press the home button to wake the phone it doesnt react...when i press it again it works normally....this happened to me two times....did anyone see this?
Click to expand...
Click to collapse
youtu.be/K-zLB7XMihE[/url]
My home button stopped working all together right after an update. How can I remove this issue? Every thing else works perfectly. Please help!
I have issues with my home button as well, it's "loose" and rattling. It has always been a bit loose but the last few months it has gotten worse and worse, it started to require more and more pressure to register the press (way beyond the pressure needed for it to *click*). As of now it does not even work at all, no matter how hard I try pressing it.
I've tried the assistant menu that's mentioned here in the thread but I just find the menu annoying. Instead I have learned to live with it for the time being, I just multitask to instagram or facebook and then spam the back button until I'm back at home.
100% hardware issue.
Apparently it's possible to replace the home button, and there are replacement home button to buy from ebay, but the replacement procedure is ridiculuos. The home button is basically the last thing you will demount from the phone when disassembling it.
I found a temporary fix by dabbing the home button with Isopropyl, this made it like new again. But two days later it's back to as it was before, or maybe even worse.
Annoying as hell, especially since this is a result of poor quality control from Samsung.
Update: Found a nice little app on play store called "button remapper" which lets me rebind the default system buttons without requiring root, i have rebinded the "recent apps" button to act as a home button instead, and a long press opens the regular "recent apps". Seems to be an alright workaround.
Just go to samsung shop,let them see,if no exchange or replace or fix, take their demo phones like s8 (2017) throw on to the floor and then take any phone u want, leave the s6 phone alone (make sure it is factory reseted).Ran away and shout #ALLAHUAKBAR!