Related
So, I was attempting to change my font by using Font Installer. I selected the font I wanted, it goes to reboot like normal, but instead it freezes. So I wait a couple minutes, then I pulled the battery. Now my device is stuck at Motorola's boot screen.
So I'm searching around to see what I can do to fix this issue and get my device back up and running. And it looks like its going to be the FXZ.
Is a FXZ appropriate for this situation( I asked this because all of the other threads were for more complicated occasions than mine)? Or are there other options I can try before diving into it?
Thanks for any help....
If after several tries you still can't get past the Motorola boot screen then yes you need to flash the FXZ.
MACKSnare519 said:
So, I was attempting to change my font by using Font Installer. I selected the font I wanted, it goes to reboot like normal, but instead it freezes. So I wait a couple minutes, then I pulled the battery. Now my device is stuck at Motorola's boot screen.
So I'm searching around to see what I can do to fix this issue and get my device back up and running. And it looks like its going to be the FXZ.
Is a FXZ appropriate for this situation( I asked this because all of the other threads were for more complicated occasions than mine)? Or are there other options I can try before diving into it?
Thanks for any help....
Click to expand...
Click to collapse
If after several attempts, its a good idea the to flash the fix. Just make sure you have a good charge before you do so, and never unplug it while its flashing.
Ok, I just followed the directions on the stickied thread on how to do the FXZ. How do I know when its done? Because it seems like it just stopped without saying anything.
ETA: After pressing the power button, at the top of my phone screen it says (Flash Failure).
MACKSnare519 said:
Ok, I just followed the directions on the stickied thread on how to do the FXZ. How do I know when its done? Because it seems like it just stopped without saying anything.
Click to expand...
Click to collapse
It'll say "completed" or something when its done and your phone will reboot, show a loading screen, and then tell you to set up your Google account. If you're using RSD Lite then it will give you progress (ie 7/20) in the list of phones at the bottom. It will take maybe 5-7 minutes in all.
Sent from my MB865 using Tapatalk
macksnare519 said:
ok, i just followed the directions on the stickied thread on how to do the fxz. How do i know when its done? Because it seems like it just stopped without saying anything.
Eta: After pressing the power button, at the top of my phone screen it says (flash failure).
Click to expand...
Click to collapse
again i repeat do not unplug until your phone reboots!!!
---------- Post added at 05:21 PM ---------- Previous post was at 05:20 PM ----------
Are there any error messages?? Was your battery fully charged?
farshad525hou said:
again i repeat do not unplug until your phone reboots!!!
---------- Post added at 05:21 PM ---------- Previous post was at 05:20 PM ----------
Are there any error messages?? Was your battery fully charged?
Click to expand...
Click to collapse
Battery's fully charged, never unplugged and all 20 of the processes went through. But nothing happened. My device is still sitting in the Flash Mode.
MACKSnare519 said:
Battery's fully charged, never unplugged and all 20 of the processes went through. But nothing happened. My device is still sitting in the Flash Mode.
Click to expand...
Click to collapse
At this point I'm not sure really what to tell you. I would say don't try it again until you talk to someone like Jim, to see your options. I am sorry you have to hear this but there is a possibility you may have a hard-bricked phone. Shoot a pm to Jim and see what he says. I personally don't have any experiences with a failed fkz flash so I don't want to give you any bad advice.
Oh, wow... This is really depressing. Is 'Jim' his user name?
MACKSnare519 said:
Oh, wow... This is really depressing. Is 'Jim' his user name?
Click to expand...
Click to collapse
Heres a link to his profile: http://forum.xda-developers.com/member.php?u=747555
You can PM him from there.
Also, as I've said I have no experience with failed fkz flashes, so there might be a really easy way to get around this that I don't know so don't be depressed . He is one of the most experienced developers on the Atrix 2 Forums so if anyone can fix it it's him!
Make sure you are still in fastboot and then go ahead and unzip the FXZ to your desktop and let RSD find the file itself by using the 3 little dots next to the start button and try flashing it again. Sometimes RSD can be quirky, make sure to pay attention as the steps proceed to see if you are getting any errors. When it gets to step 20/20 if will reboot your phone itself and then flash the files upon reboot. Give it a moment and it shound say whether you've had success. Hopefully it will work for ya.
I greatly appreciate you all's help!
Sadly, I think this Atrix 2 is done (After attempting the help from Jim, as well as from the thread). I just ordered another one... smh
I'll still tinker with it, in hopes of getting lucky.
Is there in any profit with selling it for parts, or something?
About an hour ago I decided to plug my device up and give it a go one more time.
And what do you know? IT WORKS!!!! #HappyDance
I think what caused the FXZ to fail was something with the ports on my laptop, because sometimes it won't recognize devices that are plugged in (This happens on all four of my ports). After I finally got it to recognize my device, and followed the FXZ instructions, and it all worked out!
Again, I will like to thank you all for your help. Greatly appreciated!!
MACKSnare519 said:
About an hour ago I decided to plug my device up and give it a go one more time.
And what do you know? IT WORKS!!!! #HappyDance
I think what caused the FXZ to fail was something with the ports on my laptop, because sometimes it won't recognize devices that are plugged in (This happens on all four of my ports). After I finally got it to recognize my device, and followed the FXZ instructions, and it all worked out!
Again, I will like to thank you all for your help. Greatly appreciated!!
Click to expand...
Click to collapse
That's Great news!!! Congrats!!!
Ou
MACKSnare519 said:
About an hour ago I decided to plug my device up and give it a go one more time.
And what do you know? IT WORKS!!!! #HappyDance
I think what caused the FXZ to fail was something with the ports on my laptop, because sometimes it won't recognize devices that are plugged in (This happens on all four of my ports). After I finally got it to recognize my device, and followed the FXZ instructions, and it all worked out!
Again, I will like to thank you all for your help. Greatly appreciated!!
Click to expand...
Click to collapse
I see you're on more forums than the 5th my fellow Legion brother... Btw, A2 is an awesome phone.
NAB4 said:
Ou
I see you're on more forums than the 5th my fellow Legion brother... Btw, A2 is an awesome phone.
Click to expand...
Click to collapse
Yep, bro I'm all over the net. Lol
And yeah, great device. My first Android.
Sent from my Motorola ATRIX 2 using Tapatalk
MACKSnare519 said:
Yep, bro I'm all over the net. Lol
And yeah, great device. My first Android.
Sent from my Motorola ATRIX 2 using Tapatalk
Click to expand...
Click to collapse
Mines as well. I bought my wife the OG atrix and I was hooked. Btw, I'm ISS2 on the 5th currently...
So i'm looking for a little help.
A little while back I used this thread : [GUIDE] TF300T Unlock/Root/Flash for Factory JB Devices (newbie friendly)
To help me install this custom rom : [ROM][TF300]|Mar 28| Energy™ -.¸¸.·´¯ Official JB 4.2.1 Stock or Themed ¯´·.¸¸. -
onto my girlfriends TF300T tablet
and I have this : [RECOVERY][TF300T/TG] TWRP 2.5.0.0 Touch Recovery! [2013-4-9] on there as well
but I can't remember if this was part of the unlock/root/flash process or not, so i'm not sure if it used it during the process or if I added it shortly afterword
now its been while since I have done it but then the tablet started to restart randomly while she was using it.
so I figured no biggie maybe an app got messed up or something, and so I told her to back up her pics, exc she wanted off the unit
and I could look at reinstalling the apps or just taking the unit back to factory rom
about a week later it started to reboot more often randomly
and now it is to the point where it will not make it into the rom
now I can make it into the boot selection where I can choose RCK (for the TWRP), USB, or the other 2 options
and I know I can make it into the TWRP tool as well and it does not repeatedly boot from there, so i'm sure its a rom issue and not a hardware issue, but I could still be wrong
the unit is currently charging so I have not had a chance to try for the usb connection option or anything else yet
hopefully the usb option will work so I can try to recover the pics, exc before taking the unit back to factory
now in the process I know I have unlocked the unit, I believe I have done the min root but have not fully rooted the unit if that makes sense
so i'm just wondering if I will half to fully root (and how do I do that if I do since I can't make it into a rom)
how do I clear the rom that has gone bad
how do I install a factory rom (how do I tell which is the lastest rom, and which one is needed for my unit)
and then I should be good from there
if you need any more info please let me know and maybe some instructions on how to get to that info
in the process of putting the energy rom onto it, I spent a week of reading, researching, and figuring out which way would probably be the safest for me to do, plus the easiest for me to understand
now that it has been so long I have been reading and researching again, I just need that nudge that gets me in the right direction
i'm sure i'm not the only one that has had this issue with a rom, and i'm also sure there is a guide out there already that goes over how to put it back to a factory rom
just for some reason i'm either over looking it or not finding it
allusion said:
So i'm looking for a little help.
A little while back I used this thread : [GUIDE] TF300T Unlock/Root/Flash for Factory JB Devices (newbie friendly)
To help me install this custom rom : [ROM][TF300]|Mar 28| Energy™ -.¸¸.·´¯ Official JB 4.2.1 Stock or Themed ¯´·.¸¸. -
onto my girlfriends TF300T tablet
and I have this : [RECOVERY][TF300T/TG] TWRP 2.5.0.0 Touch Recovery! [2013-4-9] on there as well
but I can't remember if this was part of the unlock/root/flash process or not, so i'm not sure if it used it during the process or if I added it shortly afterword
now its been while since I have done it but then the tablet started to restart randomly while she was using it.
so I figured no biggie maybe an app got messed up or something, and so I told her to back up her pics, exc she wanted off the unit
and I could look at reinstalling the apps or just taking the unit back to factory rom
about a week later it started to reboot more often randomly
and now it is to the point where it will not make it into the rom
now I can make it into the boot selection where I can choose RCK (for the TWRP), USB, or the other 2 options
and I know I can make it into the TWRP tool as well and it does not repeatedly boot from there, so i'm sure its a rom issue and not a hardware issue, but I could still be wrong
the unit is currently charging so I have not had a chance to try for the usb connection option or anything else yet
hopefully the usb option will work so I can try to recover the pics, exc before taking the unit back to factory
now in the process I know I have unlocked the unit, I believe I have done the min root but have not fully rooted the unit if that makes sense
so i'm just wondering if I will half to fully root (and how do I do that if I do since I can't make it into a rom)
how do I clear the rom that has gone bad
how do I install a factory rom (how do I tell which is the lastest rom, and which one is needed for my unit)
and then I should be good from there
if you need any more info please let me know and maybe some instructions on how to get to that info
in the process of putting the energy rom onto it, I spent a week of reading, researching, and figuring out which way would probably be the safest for me to do, plus the easiest for me to understand
now that it has been so long I have been reading and researching again, I just need that nudge that gets me in the right direction
i'm sure i'm not the only one that has had this issue with a rom, and i'm also sure there is a guide out there already that goes over how to put it back to a factory rom
just for some reason i'm either over looking it or not finding it
Click to expand...
Click to collapse
Its very simple to return to stock. But first, do you have the tablets drivers installed on your pc?
---------- Post added at 06:16 AM ---------- Previous post was at 06:14 AM ----------
And do you have fastboot?
if you are talking about the android sdk tools
yes that is installed on my computer from the first time I did the tablet
and I went ahead and did the updates for it as well
and tried plugging the unit in with the fastboot and confirm it shows up in device manager
bump
hope you didn't forget about me crazynitro
allusion said:
bump
hope you didn't forget about me crazynitro
Click to expand...
Click to collapse
sorry, i got caught up with some school work. i could walk you through the process, if you want.
if you could please, any links, post, exc you want me to read ahead of time please post
anything you need me to verify or check on please let me know
gf starting to be up my butt about her tablet, lol
but yes any help is more then appreciated
allusion said:
if you could please, any links, post, exc you want me to read ahead of time please post
anything you need me to verify or check on please let me know
gf starting to be up my butt about her tablet, lol
but yes any help is more then appreciated
Click to expand...
Click to collapse
Lol okay. Theres actually a more simple way.
1. Download the latest asus firmware.
2. Extract the zip file
3. Flash it like a normal rom.
If you cant use this method then you'll have to use fastboot. Here's a link but if you need any help, just ask : http://www.androidauthority.com/transformer-pad-tf300t-restore-stock-firmware-108016/
how do I check the sku according to that guide if i'm not able to load into the android os
that only shows if you can load into the os
would the box have that?
or now looking at the options that I should assume its is a US sku lol
crazynitro said:
3. Flash it like a normal rom.
Click to expand...
Click to collapse
lol, and how do I do that using the twrp?
can't find any detailed instructions on using twrp on flashing a rom, especially the stock one
i'm sure there is a set of detailed instructions cause I swore I saw one once
but i'm not able to find it again
cause I thought besides using the install part there were things I had to clear as well for it to work
oh and yeah the download link for fastboot is no long working in the one guide you gave me to follow so not sure if I already have what it is talking about
allusion said:
lol, and how do I do that using the twrp?
can't find any detailed instructions on using twrp on flashing a rom, especially the stock one
i'm sure there is a set of detailed instructions cause I swore I saw one once
but i'm not able to find it again
cause I thought besides using the install part there were things I had to clear as well for it to work
oh and yeah the download link for fastboot is no long working in the one guide you gave me to follow so not sure if I already have what it is talking about
Click to expand...
Click to collapse
Its simple lol. When you download the firmware from asus, its usually in a .zip form. In it, there is another zip file. Copy that zip file onto your tablet and flash it with twrp.
crazynitro said:
Its simple lol. When you download the firmware from asus, its usually in a .zip form. In it, there is another zip file. Copy that zip file onto your tablet and flash it with twrp.
Click to expand...
Click to collapse
what about having to clear anything? I could of swore the instructions showed going to 2 or 3 spots for clearing data or info or something from the unit
allusion said:
what about having to clear anything? I could of swore the instructions showed going to 2 or 3 spots for clearing data or info or something from the unit
Click to expand...
Click to collapse
Yes. You have to do a factory reset first.
and how do I do that lol, and what happens when I don't do that first
is this tablet now dead since the step of doing the reset was not complete? cause now I can not access twrp and it just sits there with the asus logo and the swirling dots
when I try to access the usb option all I have is rck, android and wipe, rck just gives a failure shortly after trying
allusion said:
lol, and how do I do that using the twrp?
can't find any detailed instructions on using twrp on flashing a rom, especially the stock one
i'm sure there is a set of detailed instructions cause I swore I saw one once
but i'm not able to find it again
cause I thought besides using the install part there were things I had to clear as well for it to work
oh and yeah the download link for fastboot is no long working in the one guide you gave me to follow so not sure if I already have what it is talking about
Click to expand...
Click to collapse
If you want to use twrp, download the us stock firm ware. when you open it, you'll see a file that looks like this: "US_epad-user-10.6.1.15.3". copy that file onto your tablet and flash it like a normal rom. haha
For fastboot, if you have the android sdk, then you already have fastboot so you dont have to download fastboot again.
---------- Post added at 03:36 PM ---------- Previous post was at 03:32 PM ----------
allusion said:
is this tablet now dead since the step of doing the reset was not complete? cause now I can not access twrp and it just sits there with the asus logo and the swirling dots
when I try to access the usb option all I have is rck, android and wipe, rck just gives a failure shortly after trying
Click to expand...
Click to collapse
if you tried installing the newest firmware, you wont see the usb icon when you press power and volume+ it automatically enters fastboot. you dont have to select anything
---------- Post added at 03:39 PM ---------- Previous post was at 03:36 PM ----------
allusion said:
and how do I do that lol, and what happens when I don't do that first
Click to expand...
Click to collapse
if you cant enter twrp, then you dont have to worry about the factory reset you can flash the stock rom using fastboot.
Hi guys,
I'm a little new to posting on XDA itself, so I'm not quite sure if I'm in the right section, as I don't have my 10 posts yet. So apologies in advance. Move me where you need to.
Alrighty. I'm running 4.1.1 (stock firmware) and I've been getting notifications to update OTA since about a month ago. However, when I try to update, it stops in the middle of the update, restarts the phone, and gives me an error 402. Not quite sure what that means, though an old Verizon forums posts pointed to a corrupt file in the phone's software itself, preventing the update from happening. Aside from that, the phone's been a mite glitchy with home screen transitions, and it's eating up a bunch of my battery life (not going into deep sleep; overheating) when it hasn't done so in the past.
I don't want to give my phone back to Verizon and get a like-new one back, but that seems like it has been the only option I've been given. I've factory reset, cleared cache through recovery, and still no luck. The error 402 keeps happening when updating.
So my question lies here - What should I do? How can I fix this error? How can I update my phone? Or better yet, is there a ROM of the original ICS software (Day one of GS3 release on Verizon) that I can flash through Odin? Then I'd just log in with Google, and let the phone update for about three hours until I'm on current software, and it really wouldn't be susceptible to software corruption if I just let it update all the way through.
Anyone with a similar problem, or does anyone know what I should do?
Thanks, and hope you can help me with this.
buckoman said:
Hi guys,
I'm a little new to posting on XDA itself, so I'm not quite sure if I'm in the right section, as I don't have my 10 posts yet. So apologies in advance. Move me where you need to.
Alrighty. I'm running 4.1.1 (stock firmware) and I've been getting notifications to update OTA since about a month ago. However, when I try to update, it stops in the middle of the update, restarts the phone, and gives me an error 402. Not quite sure what that means, though an old Verizon forums posts pointed to a corrupt file in the phone's software itself, preventing the update from happening. Aside from that, the phone's been a mite glitchy with home screen transitions, and it's eating up a bunch of my battery life (not going into deep sleep; overheating) when it hasn't done so in the past.
I don't want to give my phone back to Verizon and get a like-new one back, but that seems like it has been the only option I've been given. I've factory reset, cleared cache through recovery, and still no luck. The error 402 keeps happening when updating.
So my question lies here - What should I do? How can I fix this error? How can I update my phone? Or better yet, is there a ROM of the original ICS software (Day one of GS3 release on Verizon) that I can flash through Odin? Then I'd just log in with Google, and let the phone update for about three hours until I'm on current software, and it really wouldn't be susceptible to software corruption if I just let it update all the way through.
Anyone with a similar problem, or does anyone know what I should do?
Thanks, and hope you can help me with this.
Click to expand...
Click to collapse
Maybe just root(; lol and flash clean Rom stock 4.1.2
Sent from my SCH-I535 using Tapatalk 4 Beta
I'd really like to avoid rooting at all costs. This phone's been great for me when it's unrooted, unlike my Droid2 which needed Liberty.
But other than that, any options that don't involve rooting?
buckoman said:
I'd really like to avoid rooting at all costs. This phone's been great for me when it's unrooted, unlike my Droid2 which needed Liberty.
But other than that, any options that don't involve rooting?
Click to expand...
Click to collapse
Not unless you can remove the update and try again. Verizon soft bricked you. Don't know if you can remove the update file from memory and try to download again without root. Get a file explorer and look for the file. Not sure of name as I have only taken one OTA over all the years and it worked. If want to Odin the full MB1 update image is on SamMobile. If Odin that don't have to worry about OTA and will have same thing.
prdog1 said:
Not unless you can remove the update and try again. Verizon soft bricked you.
Click to expand...
Click to collapse
Which is kind of what I'm asking. Is there a way to re-flash the software completely through Odin? Or just flash the 4.1.2 through Odin? I haven't really been able to find the image online, though. I'd be happy with any software version as long as it deleted and overwrote my current system files with fresh, non-corrupted ones so I could start over. Since backing up files isn't a problem, or even a concern since I could really care less about keeping my files intact at this point, what can I do?
buckoman said:
Which is kind of what I'm asking. Is there a way to re-flash the software completely through Odin? Or just flash the 4.1.2 through Odin? I haven't really been able to find the image online, though. I'd be happy with any software version as long as it deleted and overwrote my current system files with fresh, non-corrupted ones so I could start over. Since backing up files isn't a problem, or even a concern since I could really care less about keeping my files intact at this point, what can I do?
Click to expand...
Click to collapse
I was editing when you responded. The Full OTA Odin Image is on SamMobile. Just Odin that and you are done.
---------- Post added at 09:27 AM ---------- Previous post was at 09:25 AM ----------
Actually I have it here. Don't know which one is faster. Forgot I uploaded it to my server.
http://d-h.st/Xfe
prdog1 said:
I was editing when you responded. The Full OTA Odin Image is on SamMobile. Just Odin that and you are done.
---------- Post added at 09:27 AM ---------- Previous post was at 09:25 AM ----------
Actually I have it here. Don't know which one is faster. Forgot I uploaded it to my server.
http://d-h.st/Xfe
Click to expand...
Click to collapse
And just making sure, using Odin will completely wipe the phone, yes?
Hello all.
I rooted my Razr HD after the most recent update (prior to KitKat), so I'm rooted but not unlocked. In my ultimate wisdom, I completely removed (did not merely freeze) some bloatware apps, and only today am learning they are necessary to receive OTA updates.
A factory reset did not restore the apps.
Is it possible to get these bloatware apps back onto my device, or am I pretty much screwed?
If there is a way to restore them, am I screwed anyway due to having previously rooted my device and not having a way to flash a ROM?
My apologies if these questions are dumb; I've been looking for information regarding this for a couple hours and have come up empty so far.
Depending on what version you are currently on, you will need to get the correct FXZ image to fastboot onto your device to return it to stock.
Go here to fix you right up:
http://www.droidrzr.com/index.php/topic/45494-how-to-xt926-upgrade-to-kitkat-ota/
Sent from my Nexus 7 using Tapatalk
Thanks a lot for the advice and the links. The process seems to work ok up until it tries to flash system.img.ext4, at which point it returns the message "Phone returned FAIL.; phone connected". If I remove that one line from the XML file, everything else goes through with no issues, so that seems to be the last thing holding me back.
When I attempt to boot the phone, I receive the following:
No valid PIV block in SP for system
piv validation failed (system)
Fastboot Reason: Boot Failure
Click to expand...
Click to collapse
I will double-check some things and try one more thing before I declare myself stuck again.
Well, I'm glad I ran my double-checks because I would have wasted someone else's time otherwise. After updating to a slightly more recent version of RSD Lite, it got all the way through the reflash process.
My phone boots now. The stock apps are back. I'm letting all my apps update before I attempt the KitKat update, but I'm feeling confident about this. iBolski, I can't thank you enough, and I will love you forever.
A little help..
Thanks for posting this! However I'm running into an issue. I downloaded the latest firmware for my XT907 as well as the latest version on RSD Lite, but when I go to flash the stock image I get an error message that says "unknown fastboot command [getvar]. Any ideas??
Worked for me
Thank you iBolski. The process failed the first time I ran RSD Lite, but it worked the second time. I did not unplug the phone or take it out of Fast Boot mode before trying it the second time. This is very helpful.
froyton said:
Well, I'm glad I ran my double-checks because I would have wasted someone else's time otherwise. After updating to a slightly more recent version of RSD Lite, it got all the way through the reflash process.
My phone boots now. The stock apps are back. I'm letting all my apps update before I attempt the KitKat update, but I'm feeling confident about this. iBolski, I can't thank you enough, and I will love you forever.
Click to expand...
Click to collapse
Eustace2 said:
Thank you iBolski. The process failed the first time I ran RSD Lite, but it worked the second time. I did not unplug the phone or take it out of Fast Boot mode before trying it the second time. This is very helpful.
Click to expand...
Click to collapse
Glad it helped.
---------- Post added at 03:05 PM ---------- Previous post was at 03:00 PM ----------
moodaddy said:
Thanks for posting this! However I'm running into an issue. I downloaded the latest firmware for my XT907 as well as the latest version on RSD Lite, but when I go to flash the stock image I get an error message that says "unknown fastboot command [getvar]. Any ideas??
Click to expand...
Click to collapse
Go back to the following link and get the latest FXZ generator. SamuriHL has been updating it as people have been reporting issues:
http://www.droidrzr.com/index.php/topic/45349-rsd-script-generator/
He updated it yesterday to handle issues for your phone (XT907) and the XT926s as well. See if that fixes your issue. Otherwise, I'm not sure how else to help you.
Hey guys,
my asus transformer pas infinity which i own like two years now, has been just refusing to come on... it keeps on restarting and restarting . any way you guys can help me out?
Reser\/ed_TT said:
Hey guys,
my asus transformer pas infinity which i own like two years now, has been just refusing to come on... it keeps on restarting and restarting . any way you guys can help me out?
Click to expand...
Click to collapse
Are you running stock? Which version? Have you tried downloading the stock image from Asus and manually updating?
sbdags said:
Are you running stock? Which version? Have you tried downloading the stock image from Asus and manually updating?
Click to expand...
Click to collapse
um, im so going to sound like i know nothing about technology................................................................but yes its stock never rooted nor gave any issues like this before. version, im not sure is there a way i can find that out without having to turn it on? as thats kinda not possible
have not tried dowloading anything . i just factory reset it to see if that helps....
How did you factory reset? From the Settings menu and then it started to bootloop?
Or did you figure out how to get into the bootloader menu and used the Wipe Data option there?
If you did the latter already your last option (short of sending it in for repair) is to reflash the firmware.
Here's a step-by-step that I updated fairly recently: http://www.transformerforums.com/fo...e-firmware-tf700-tf701-tf300-tf101-tf201.html
anyway to find path?
if i cant get my tab on how do i know what sku to use?
trial and error?
Reser\/ed_TT said:
if i cant get my tab on how do i know what sku to use?
trial and error?
Click to expand...
Click to collapse
Hold down volume down and power when powering on and it will stop on the bootloader screen. It will tell you your current version and sku in the top left.
tab working
guys thank you soooo much, you just basically taught me about rooting my device along with the steps provided. hehe
but my infinty is back up n running as of last night.
again guys bless you all so much with all the desires you guys got.
humbly grateful.
Reserved,
Trinidad & Tobago
Still Bootlooping
Hey guys,
it did come on and work properly for a while, but after installing just a few apps, i held the power button and hit resart. and well it has not restarted since.
im unsure if i did something wrong on the initial root and install. i followed the instructions step by step. grr :crying:
so? is it advisable to go back into the bootloader menu, wipe data again, and try the install again?
NO!!!
Never wipe data from bootloader or Settings with a custom recovery installed!
Do it in recovery to your heart's content but nowhere else.
I don't have time to research your story right now and no idea what steps you followed, so I'm not giving any advice right now. Maybe someone else can, I'll be back tonight...