Database Info

Question about installing OTA

I was supposed to be part of the soak but for some reason my phone is invisible to the Moto update servers and they cannot push the update to me. I have the update file someone gave me a link to download. I have two questions about how to install it.
1. Since I am rooted can I just put it where Moto would have downloaded it to and then my phone will update it like it got the OTA?
or
2. If I install it off the SD card will it just do recovery first and then display injured android man, and then have to reselect the zip package again to finish instlling the update?
I would prefer method 1 if possible. If one of the devs or a knowledgeable person could respond I would appreciate it. I'll give Moto about six more hours to get this straightened out, otherwise I am tired of waiting to get my Atrix 2 onto ICS.

Hi. I don't suppose the end result would be different, whatever method you choose.

athani said:
Hi. I don't suppose the end result would be different, whatever method you choose.
Click to expand...
Click to collapse
Where does moto put the zip file so I can try putting it where the OTA would have downloaded to? Then when I go to check for update it should say an update is ready for installing. Do they put it in the cache directory? Someone who knows please let me know. Thanks.

athani said:
Hi. I don't suppose the end result would be different, whatever method you choose.
Click to expand...
Click to collapse
AFAICT this seems true, you I could run a leak#2/soak based ROM as a second system (first system too?) with boot menu manager by following the guides:
http://forum.xda-developers.com/showthread.php?t=1779968
http://forum.xda-developers.com/showthread.php?t=1882335

jboxer said:
Where does moto put the zip file so I can try putting it where the OTA would have downloaded to? Then when I go to check for update it should say an update is ready for installing. Do they put it in the cache directory? Someone who knows please let me know. Thanks.
Click to expand...
Click to collapse
Yes, it is /cache... but I think you also need the .crc file of the same name along with the actual .zip - not positive though. And, it can take a little while for it to recognize it - but I have done it that way, by putting it in the cache folder - also, it will disappear if you reboot.
But, you do know what you are doing, right? There is no fxz yet...
---------- Post added at 08:17 AM ---------- Previous post was at 08:12 AM ----------
Edit.. since it's the same files as leak#2.. for the .crc file, you could just make your own if you don't have it:
-Just create a new blank file with notepad++
-Add this as the first and only line (no blank lines after)
Code:
3114145323
-Then, save it as Blur_Version.55.13.25.MB865.ATT.en.US.crc

alteredlikeness said:
Yes, it is /cache... but I think you also need the .crc file of the same name along with the actual .zip - not positive though. And, it can take a little while for it to recognize it - but I have done it that way, by putting it in the cache folder - also, it will disappear if you reboot.
But, you do know what you are doing, right? There is no fxz yet...
---------- Post added at 08:17 AM ---------- Previous post was at 08:12 AM ----------
Edit.. since it's the same files as leak#2.. for the .crc file, you could just make your own if you don't have it:
-Just create a new blank file with notepad++
-Add this as the first and only line (no blank lines after)
Code:
3114145323
-Then, save it as Blur_Version.55.13.25.MB865.ATT.en.US.crc
Click to expand...
Click to collapse
Yes, I know what I am doing. I used to develop roms for LG P999 but have not played around with my Atrix much. LG does their OTA updates very differently and downloads them in pieces all over the place so no way to use the method I am suggesting for the Atrix. I don't care about being able to fxz back as I just want the phone on official ICS; but I do appreciate your caveat. Thanks for the reply.
If anyone has the .crc file please upload somewhere so I can grab it. Thanks.

jboxer said:
Yes, I know what I am doing. I used to develop roms for LG P999 but have not played around with my Atrix much. LG does their OTA updates very differently and downloads them in pieces all over the place so no way to use the method I am suggesting for the Atrix. I don't care about being able to fxz back as I just want the phone on official ICS; but I do appreciate your caveat. Thanks for the reply.
If anyone has the .crc file please upload somewhere so I can grab it. Thanks.
Click to expand...
Click to collapse
I know you know what you are doing.. just had to throw that in there..
Here's the .crc file from the last leak from 9/5/12... should be the same as the soak one: https://dl.dropbox.com/u/61960599/Leak_09.05.12/Blur_Version.55.13.25.MB865.ATT.en.US.crc

alteredlikeness said:
I know you know what you are doing.. just had to throw that in there..
Here's the .crc file from the last leak from 9/5/12... should be the same as the soak one: https://dl.dropbox.com/u/61960599/Leak_09.05.12/Blur_Version.55.13.25.MB865.ATT.en.US.crc
Click to expand...
Click to collapse
Thanks. I will give them a few hours to get to work and see if my phone is visible to the update servers now that I have done an FDR as they requested. If so, I will just let the OTA do its thing. If not I will manually update my phone.

Also I do not think you can be rooted to update the check will prevent you from updating, also you have to be as close as stock as you can..... Meaning all bloat must be unfroze.....
One more note there is a Q&A section now so try to post questions there.....

jboxer said:
I was supposed to be part of the soak but for some reason my phone is invisible to the Moto update servers and they cannot push the update to me. I have the update file someone gave me a link to download. I have two questions about how to install it.
1. Since I am rooted can I just put it where Moto would have downloaded it to and then my phone will update it like it got the OTA?
or
2. If I install it off the SD card will it just do recovery first and then display injured android man, and then have to reselect the zip package again to finish instlling the update?
I would prefer method 1 if possible. If one of the devs or a knowledgeable person could respond I would appreciate it. I'll give Moto about six more hours to get this straightened out, otherwise I am tired of waiting to get my Atrix 2 onto ICS.
Click to expand...
Click to collapse
Can you share the link of the update file?
Thanks

jboxer said:
Thanks. I will give them a few hours to get to work and see if my phone is visible to the update servers now that I have done an FDR as they requested. If so, I will just let the OTA do its thing. If not I will manually update my phone.
Click to expand...
Click to collapse
Could the fact that you're not in the US, are now unlocked and on another network have something with failure to get the OTA!?

You can be rooted. The update asserts only check for the original system files to make sure they have not been modified or deleted. It does not check for extra files like superuser.apk or busybox. Rooting is not a problem. I set superuser to OTA protect and it worked. After the update my ICS was still rooted without me having to root it.
For the person that wants the leak the OTA is leak # 2. It is exactly the same. Just find thread with download link for leak # 2 and you are good to go.

Would installing beats audio drivers using the app be considered tampering with system files? And would it prevent me from receiving a ota?
Sent from my MB865 using xda premium

athani said:
Could the fact that you're not in the US, are now unlocked and on another network have something with failure to get the OTA!?
Click to expand...
Click to collapse
No, they wanted people like that to make sure it worked. Just had to do an FDR and then was good to go. Got the OTA and on ICS now.

ramosquera said:
Can you share the link of the update file?
Thanks
Click to expand...
Click to collapse
The devs have confirmed that the soak test OTA is identical to ICS leak #2.

jboxer said:
No, they wanted people like that to make sure it worked. Just had to do an FDR and then was good to go. Got the OTA and on ICS now.
Click to expand...
Click to collapse
Sorrry but what mean FDR? because I'm in that situation: Im not in US and I have the phone unlocked, and I'm using it with other operator... Is just ended the soak test?... because the phone say me "Your phone is updated, Is not required a update in this moment" (Translated from Spanish) when I look in Settings -> About the phone -> Update, and I'm have the system version 55.13.25.MB865.ATT.en.US.

nelsonalfo said:
Sorrry but what mean FDR? because I'm in that situation: Im not in US and I have the phone unlocked, and I'm using it with other operator... Is just ended the soak test?... because the phone say me "Your phone is updated, Is not required a update in this moment" (Translated from Spanish) when I look in Settings -> About the phone -> Update, and I'm have the system version 55.13.25.MB865.ATT.en.US.
Click to expand...
Click to collapse
You have to be someone that was invited and filled out a survey about six weeks ago. If you are you need to go to the Motorola Private forum. Go see how others are requesting it (not allowed to really talk about it). FDR means Factory Data Reset and it is an option in Privacy in Settings. It erases all your user settings, app data and you are back to square one like when the phone came out of the box. For many people it was required to get what they wanted.
If you were not invited don't worry. Usually the official rollout of the OTA will come within a week of a soak test if no problems are found. It is the same as leak # 2 so just look on this forum and you can install that manually. The release is solid so I see no reason the OTA won't be going live to all AT&T Atrix 2 devices very soon.

nelsonalfo said:
Sorrry but what mean FDR? because I'm in that situation: Im not in US and I have the phone unlocked, and I'm using it with other operator... Is just ended the soak test?... because the phone say me "Your phone is updated, Is not required a update in this moment" (Translated from Spanish) when I look in Settings -> About the phone -> Update, and I'm have the system version 55.13.25.MB865.ATT.en.US.
Click to expand...
Click to collapse
I think he means Factory Data Reset.. found in settings>backup & reset (?) forgot where it was on GB, but it's in the settings.
Edit: Lol.. jboxer - I've been too slow a lot recently

alteredlikeness said:
I think he means Factory Data Reset.. found in settings>backup & reset (?) forgot where it was on GB, but it's in the settings.
Edit: Lol.. jboxer - I've been too slow a lot recently
Click to expand...
Click to collapse
I hated doing it but it was necessary for some reason. Before it my phone was invisible to the update servers. After it was and I got a push notification to begin the download. Loving ICS.

[Q] I535VRUCNC1 update

does anyone know what the new I535VRUCNC1 has to offer over the ML1 update?

esjames said:
does anyone know what the new I535VRUCNC1 has to offer over the ML1 update?
Click to expand...
Click to collapse
Literally one thing: http://www.verizonwireless.com/dam/support/pdf/system_update/galaxy_s3-4.30.14.pdf

Well, then. Thats a worthy update lol

esjames said:
Well, then. Thats a worthy update lol
Click to expand...
Click to collapse
by all means, if you're traveling to Canada then update away haha

Lmao wow. That's the most pitiful update ever. Seriously, couldn't they have waited until there was something more substantial and then included Canadian roaming in THAT update. As always though, Verizon is dumber than a bag of hammers...
Sent from my iPhone using Tapatalk

Might be worthwhile to extract the modem package and see if the SMS bug is rectified.

wow
i was so sure this was a KK upgrade. been looking around for how to retain root if you take it. thanks for the info!

Hey guys, I have a question about this update,
My friend has the S3 for whom I safe- rooted, debloated and whatnot. Now that this update came, my friend tried to update but to no avail. She is adamant about the fact that Verizon definitely has something important hidden in the update, despite me trying to tell her otherwise, and figured that she couldn't install the update because she was rooted.
Naturally, I fully unroot her entire phone, uninstall root-only apps, and try the update, but it doesn't work. When the phone reboots for installation, the installation bar loads for a bit,hangs, then just says "error" and does not update.
Anyone know what the problem could be? Normally I wouldn't care so much, but if Android 4.4 is actually coming to the S3 then I don't want her not to have it, and I can already tell it's not going to work if this update doesn't either.
Thank you so much in advance.

EddieK23 said:
Hey guys, I have a question about this update,
My friend has the S3 for whom I safe- rooted, debloated and whatnot. Now that this update came, my friend tried to update but to no avail. She is adamant about the fact that Verizon definitely has something important hidden in the update, despite me trying to tell her otherwise, and figured that she couldn't install the update because she was rooted.
Naturally, I fully unroot her entire phone, uninstall root-only apps, and try the update, but it doesn't work. When the phone reboots for installation, the installation bar loads for a bit,hangs, then just says "error" and does not update.
Anyone know what the problem could be? Normally I wouldn't care so much, but if Android 4.4 is actually coming to the S3 then I don't want her not to have it, and I can already tell it's not going to work if this update doesn't either.
Thank you so much in advance.
Click to expand...
Click to collapse
Some of the bloatware you removed likely had to be present on the phone in order for the update to take place. Unless you are sure someone is never going to go back to stock without flashing an ODIN tar image and wiping their phone clean, best to just freeze bloatware with Titanium Backup. That way you can just unfreeze it in order to go back to full stock. Unless you have a list of the bloatware you removed and can somehow sideload them back in, you will unfortunately have to flash her phone to full stock VRUCML1 and wipe it clean.

landshark68 said:
Some of the bloatware you removed likely had to be present on the phone in order for the update to take place. Unless you are sure someone is never going to go back to stock without flashing an ODIN tar image and wiping their phone clean, best to just freeze bloatware with Titanium Backup. That way you can just unfreeze it in order to go back to full stock. Unless you have a list of the bloatware you removed and can somehow sideload them back in, you will unfortunately have to flash her phone to full stock VRUCML1 and wipe it clean.
Click to expand...
Click to collapse
Ah, I see, next time I'm around her I'll re-root it and backup all her stuff with titanium backup, flash the VRUCML1 and factory reset, then restore everything and see if it works.
Strangely enough, when the same update for my Verizon Note 2 came out, I was able to update while rooted even though I unsinatalled theexact same system apps I did on her phone. How strange.
Nonetheless, thank you so much.

I have a question for you all. I took the OTA update for 4.3 when it came out but after that I rooted my gs3 Verizon phone again successfully. Now I also took this last update and now lost root on my phone. I tried to reroot the phone but it fails now. There error I get on safestrap is something about the addresses not being able to be found. Can anyone help me reroot my phone so my apps like titanium will work again?
Thanks

Joe R said:
I have a question for you all. I took the OTA update for 4.3 when it came out but after that I rooted my gs3 Verizon phone again successfully. Now I also took this last update and now lost root on my phone. I tried to reroot the phone but it fails now. There error I get on safestrap is something about the addresses not being able to be found. Can anyone help me reroot my phone so my apps like titanium will work again?
Thanks
Click to expand...
Click to collapse
U gotta Odin back to 4.3 ML1 .. The latest update unroots your fone. And can not be rooted.
Sent from my SCH-I535 using Tapatalk

Ok thanks. I will try to find an ML1 download.
Sent from my Samsung Galaxy S III using Tapatalk

Ok, since I'm not doing the update, how do I get rid of this nagging reminder popping up that I need to update?

pnuker said:
Ok, since I'm not doing the update, how do I get rid of this nagging reminder popping up that I need to update?
Click to expand...
Click to collapse
See here: http://forum.xda-developers.com/showthread.php?t=
Sent from my SCH-I535 using Tapatalk 4

Maintained root
twistedillutions said:
U gotta Odin back to 4.3 ML1 .. The latest update unroots your fone. And can not be rooted.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I was able to maintain root on the OTA update by having OTA Survival Mode checked on SuperSU.

SlimSnoopOS said:
See here: http://forum.xda-developers.com/showthread.php?t=
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Looks like the link is broken. I searched the forum and came up empty. Anyone know what the link should've been or how to disable this junk?

smalco44 said:
Looks like the link is broken. I searched the forum and came up empty. Anyone know what the link should've been or how to disable this junk?
Click to expand...
Click to collapse
Apparently I need a refresher on how to properly copy and paste Here's the link again: http://forum.xda-developers.com/showthread.php?p=52515244#post52515244

I have not yet updated to this new patch yet, am I still able to install saferoot as directed on the thread for it or do I need to do something special first?

[Q] Error with OTA update on Stock Android

So I'm running completely stock, never rooted Android 5.0 on my Nexus 5. I got the 5.0.1 update today and when I go to install, it gives me the dead android pic with "error". Anybody else having the same issue? Also, would me enabling developer options have anything to do with it?
P.S. Already cleared my cache partition and it's still giving me the error.

Oh sweet jesus, how many more threads like this we going to have.
You modified /system in some way. Read one of the million threads already here on the forum with similar problem.

beekay201 said:
Oh sweet jesus, how many more threads like this we going to have.
You modified /system in some way. Read one of the million threads already here on the forum with similar problem.
Click to expand...
Click to collapse
or just give it out so we noobs can easily be guided?

beekay201 said:
Oh sweet jesus, how many more threads like this we going to have.
You modified /system in some way. Read one of the million threads already here on the forum with similar problem.
Click to expand...
Click to collapse
Except, like I said, I didn't. I did not root or unlock the bootloader or play around with the phone at all, strictly for this reason. I didn't want to go through the struggle of factory resetting my device every now and then. The closest thing to "modifying" the phone was me unlocking developer settings and I was asking if that could have something to do with it.
Every other thread on the forums has to do with people rooting so no, it's not like one of the millions of other threads.

Describe more.

The best way to update is by flashing the factory image in fastboot, i don`t trust/hate OTA`s personaly

I updated from kitkat to Lollipop with no issues from the OTA update. That was really recent and I haven't changed anything having to do with the system since then. Yet the 5.0.1 update is giving me the error message.
I'm trying to avoid doing a factory reset as that was the main reason that I've kept the phone completely stock. I figured not rooting the phone would let me update in peace and, since it's a nexus, it's been enough to handle my needs without any customization.

kubus908 said:
I updated from kitkat to Lollipop with no issues from the OTA update. That was really recent and I haven't changed anything having to do with the system since then. Yet the 5.0.1 update is giving me the error message.
I'm trying to avoid doing a factory reset as that was the main reason that I've kept the phone completely stock. I figured not rooting the phone would let me update in peace and, since it's a nexus, it's been enough to handle my needs without any customization.
Click to expand...
Click to collapse
Is your bootloader unlocked? I don't know why the ota isn't working but something must have changed on your device
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
Is your bootloader unlocked? I don't know why the ota isn't working but something must have changed on your device
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Just double checked and nope, bootloader is locked. Yeah :/ I was trying to see if it's an issue with anybody else on completely stock devices. So far mine is a no go, even though the 5.0 update worked flawlessly. Why would the 5.0 update go through, yet the 5.0.1 believes the system has been modified..?

kubus908 said:
Just double checked and nope, bootloader is locked. Yeah :/ I was trying to see if it's an issue with anybody else on completely stock devices. So far mine is a no go, even though the 5.0 update worked flawlessly. Why would the 5.0 update go through, yet the 5.0.1 believes the system has been modified..?
Click to expand...
Click to collapse
Well, there's a way to get the ota but it is going to be tedious. It involves rooting with towelroot, then using bootunlocker from the play store. That'll allow you to unlock the bootloader without wiping your device. Then you'll need to flash the system, boot, and recovery image with fastboot from the 5.0 factory image. Then do the ota.
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
Well, there's a way to get the ota but it is going to be tedious. It involves rooting with towelroot, then using bootunlocker from the play store. That'll allow you to unlock the bootloader without wiping your device. Then you'll need to flash the system, boot, and recovery image with fastboot from the 5.0 factory image. Then do the ota.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
May as well skip the ota if you're going to go through this process.
---------- Post added at 07:06 PM ---------- Previous post was at 07:05 PM ----------
digitLIX said:
or just give it out so we noobs can easily be guided?
Click to expand...
Click to collapse
Or wait for the next time the question is asked.
Should be any minute now.

Thanks! I may just wait until the next update and see if there's a chance it'll work. Or I may just have to do a fresh new install which I am not looking forward to at all Lol. But thank you for your help!

Uhhhh, ok. So I'm not exactly sure what happened. I figured I'd give the OTA another try because why not...and it worked I noticed it downloaded a bigger file too, 30ish mb as opposed to the 13mb OTA that would give me an error. Not sure if I got sent a wrong update file or what, but if your issue comes close to what I experienced, just keep trying the OTA update. I'm also on T-Mobile (phone bought directly from T-Mobile) in case that makes any difference.

Help recovering files from an s3

Hey all! My friend has an s3. He is in a different state so I can't experiment on it quite yet.
He has a lot of files he needs to recover from the internal storage. He already has the sd data.
The issue is that the phone will not fully boot. It gets a little past the verizon logo and crashes.
He has tried wiping cache, and booting without the sdcard in.
What can we do to get those files for him?
Verizon said they can't use their diag machine since the device needs to fully power on for them to service it in that fashion.

Is it possible to flash the stock system partition without overwriting data via Odin?

Bump

tr4nqui1i7y said:
Hey all! My friend has an s3. He is in a different state so I can't experiment on it quite yet.
He has a lot of files he needs to recover from the internal storage. He already has the sd data.
The issue is that the phone will not fully boot. It gets a little past the verizon logo and crashes.
He has tried wiping cache, and booting without the sdcard in.
What can we do to get those files for him?
Verizon said they can't use their diag machine since the device needs to fully power on for them to service it in that fashion.
Click to expand...
Click to collapse
tr4nqui1i7y said:
Is it possible to flash the stock system partition without overwriting data via Odin?
Click to expand...
Click to collapse
Really kind of a tough situation.
Can he get into recovery mode? If so maybe he can pull data from it that way. There's a few ways to do it. It's hard to tell unless I see what the phone does when it boots.
Sorry for the late reply, hardly ever check these forums anymore.

BadUsername said:
Really kind of a tough situation.
Can he get into recovery mode? If so maybe he can pull data from it that way. There's a few ways to do it. It's hard to tell unless I see what the phone does when it boots.
Sorry for the late reply, hardly ever check these forums anymore.
Click to expand...
Click to collapse
I know he can get to stock recovery, because he's wiped cache that way. I don't believe that he is rooted or anything. I won't know for sure until I'm in person. The issue is that he thinks Verizon wants him to send the phone to them. He used a free upgrade. They sent him the replacement phone with a return box, so he's still not sure at the moment. And I haven't used an upgrade in about 4 years so I don't remember ever having to give back a device.

tr4nqui1i7y said:
I know he can get to stock recovery, because he's wiped cache that way. I don't believe that he is rooted or anything. I won't know for sure until I'm in person. The issue is that he thinks Verizon wants him to send the phone to them. He used a free upgrade. They sent him the replacement phone with a return box, so he's still not sure at the moment. And I haven't used an upgrade in about 4 years so I don't remember ever having to give back a device.
Click to expand...
Click to collapse
If he has USB debugging enabled be can use ADB to pull the SD card folder onto his computer in recovery mode.
Otherwise can't do much with stock recovery, if he's rooted you may be able to load TWRP from download mode and boot immediately into recovery mode.

BadUsername said:
If he has USB debugging enabled be can use ADB to pull the SD card folder onto his computer in recovery mode.
Otherwise can't do much with stock recovery, if he's rooted you may be able to load TWRP from download mode and boot immediately into recovery mode.
Click to expand...
Click to collapse
He's got the SD data. We're working on the /data/ partition now. I think it's mainly notes and pics if I'm not mistaken. I'm really hoping that he's rooted and just forgot or something.

We can make it into odin mode.

You don't need root.
Sent from my Nexus 6 using XDA-Developers Legacy app
---------- Post added at 06:00 AM ---------- Previous post was at 05:59 AM ----------
I can probably help you out.
Sent from my Nexus 6 using XDA-Developers Legacy app

whodisname said:
You don't need root.
Sent from my Nexus 6 using XDA-Developers Legacy app
---------- Post added at 06:00 AM ---------- Previous post was at 05:59 AM ----------
I can probably help you out.
Click to expand...
Click to collapse
I'm thinking of trying to flash stock via Odin to see if that will make it boot. Otherwise, it may have to go jtag route.

I am going to attempt to ODIN on it. Unfortunately I don't know what version of android he was on.
Which ODIN files would you recommend? Preferably one that won't need me to wipe the data partition. Also, please provide links if possible. I have found some stuff on my own, but a lot of links are dead.

tr4nqui1i7y said:
I am going to attempt to ODIN on it. Unfortunately I don't know what version of android he was on.
Which ODIN files would you recommend? Preferably one that won't need me to wipe the data partition. Also, please provide links if possible. I have found some stuff on my own, but a lot of links are dead.
Click to expand...
Click to collapse
Odin will wipe everything. Every .tar file I've come across essentially just return the phone to a completely stock state.
Wish I had old stuff but I don't. What have you found?

BadUsername said:
Odin will wipe everything. Every .tar file I've come across essentially just return the phone to a completely stock state.
Wish I had old stuff but I don't. What have you found?
Click to expand...
Click to collapse
Ah, I had found one that said it wasn't​ going to wipe data. I'll try to find the link again today. They were saying it was like doing an ota update and it would leave data in place.

tr4nqui1i7y said:
Ah, I had found one that said it wasn't​ going to wipe data. I'll try to find the link again today. They were saying it was like doing an ota update and it would leave data in place.
Click to expand...
Click to collapse
O wait I think I vaguely remember, but that we when the bootloader was unlocked, like 5 years ago.
Make sure you post the for here and I can try to help you, but if it's an older version it won't. You need to make sure the Odin file is the same or newer than your current bootloader.

@BadUsername I found this, which has the crappiest hosting servers I have ever seen. You can only download one file a day, so I need to keep changing my IP if I need more than one file from it. here
This is the no-wipe file i was referring to. I am just not sure if it is an android version that his device will accept. I am not sure if Odin allows you to go forward and backward. Here

tr4nqui1i7y said:
@BadUsername I found this, which has the crappiest hosting servers I have ever seen. You can only download one file a day, so I need to keep changing my IP if I need more than one file from it. here
This is the no-wipe file i was referring to. I am just not sure if it is an android version that his device will accept. I am not sure if Odin allows you to go forward and backward. Here
Click to expand...
Click to collapse
Just open up download mode and post what it says in the top left corner.
Also that file you posted first is the newest one, assuming it's legit it would work. That would for sure wipe everything.
Bottom one is old, probably won't work. Odin should just fail and not let you flash it. If it did work, it would fail at the bootloader stage and brick your phone anyway.

BadUsername said:
O wait I think I vaguely remember, but that we when the bootloader was unlocked, like 5 years ago.
Make sure you post the for here and I can try to help you, but if it's an older version it won't. You need to make sure the Odin file is the same or newer than your current bootloader.
Click to expand...
Click to collapse
That's what I was afraid of. I have no idea how updated he kept the device. And since I can only get into stock recovery and download mode I can't learn much about the device. I wish I could just adb in and grab the data partition off of it. Verizon is hounding him to send the device back or they will charge him $500 or something absurd. Which seems extra crazy since he has had that device since it was released. I thought for sure he would own it by now. Verizon has never asked me for a device back.
Have you found any helpful odin stuff out?

BadUsername said:
Just open up download mode and post what it says in the top left corner.
Click to expand...
Click to collapse
I won't be able to see the device until tonight. I will try to see if he is around the device now so he can let me know. His house has terrible reception and no wifi so I am trying to gather everything before the next time I go there.

@BadUsername Do you know if there is a list of odin files anywhere? This sub seems so disorganized imo. I can't find a helpful sticky or anything.

tr4nqui1i7y said:
I won't be able to see the device until tonight. I will try to see if he is around the device now so he can let me know. His house has terrible reception and no wifi so I am trying to gather everything before the next time I go there.
Click to expand...
Click to collapse
You can still pull nearly everything off the phone with adb from download mode if USB debugging was enabled, you can literally pull every partition and extract what you need.
You can load a very old version of cwm recovery through Odin and flash aroma file manager if you are rooted, if you can get into recovery. Then you can move whatever you want to an external SD card.
Other than that you're likely stuck.

Repair firmwares??

So im wondering if anyone has repair firmwares for the USA SM_G955U. i recently installed a U2QK4 update OTAusing ADB from the ATT section and everything went bad from there. I was told i may not be able to downgrade but thats not the problem. I CANT DO ANYTHING WITH MY PHONE NOW! IT HAS NO RECOVERY AT ALL IT JUST FLICKERS THE BLUE SCREEN WITH THE ANDROID AND A TEXT APPEARS OCCASIONALLY ON THE FLICKERING SCREEN WITH A WHOLE BUNCH OF FAILS. THERE IS NO UPLOAD MODE AT ALL. I CAN ONLY ACCESS DOWNLOAD MODE WHICH MAKES NO SENSE TO FLASH ANYTHING CAUSE NOTHING WORKS. THE ONLY THING THAT IS FLASHABLE ON NON-MODDED AND MODDED ODIN IS CP! I DONT EXACTLY UNDERSTOOD WHAT HAPPENED. EVERYTHING WAS OPERABLE AND THEN THE PHONE ENCRYPTED ITSELF,REBOOTED ANDA BLUE SCREEN WITH A CARD WAS FLASHING AND ALL WENT TO HELL. TRIED REBOOTING AND THATS WHERE IT ALL BEGAN! I HAVE NEVER EXPERIENCED THAT ON A PHONE BEFORE!
ITS BEEN DAYS SINCE THIS HAPPENED AND I WAS TOLD THE FIRMWARE WAS BEING UPDATED FROM THE OP AND STILL NOTHING! I DONT THINK PEOPLE SHOULD POST THINGS TO FLASH WITH JUST A WARNING ON HERE, THEY SHOULD TEST IT BEFORE POSTING BECAUSE PEOPLE LIKE ME GET CURIOUS AND WANT TO FLASH THINGS,BUT, THE POSTER DOESNT HAVE ANY IDEA WHAT IT DOES!NOT HIS FAULT AS I AM TO BLAME,
ILL SAY IT HERE AGAIN SO PEOPLE DONT THINK IM BLAMING ANYONE,
I I AM TO BLAME!!!!
OKAY, BUT, NOW I AM STUCK WITH A $950 PAPERWEIGHT! AND HONESTLY I WANTED TO BRICK IT, BUT, I THOUGHT WARRANTY OR INSURANCE WOULD COVER IT IN WHICH THEY WONT BECAUSE ATT IS GETTING CRAPPY WITH THEIR CUSTOMER SERVICE. IT SEEMS I HAVE BEEN LEFT IN THE DARK WITH NO CLUES OR HELP.
SORRY FOR CAPITAL LETTERS FORGOT TO TURN IT OFF AND AM NOT ABOUT TO RE-TYPE.
IF ANYONE KNOWS WHAT TO DO OR HOW TO FIX THIS PLEASE HELP.
(AND GETTING A NEW PHONE WONT HELP, SO THAT RESPONSE IS SHOT)
LOOKING FOR A FIX. THANKS IN ADVANCE

Please, don't SHOUT!

dalanik said:
Please, don't SHOUT!
Click to expand...
Click to collapse
Haha I didn't know text could be so loud shoot I even hurt my ears while I typed this hahaha

podagee said:
Haha I didn't know text could be so loud shoot I even hurt my ears while I typed this hahaha
Click to expand...
Click to collapse
Few things:
U2QK4? I don't think that's a model number for a firmware... We certainly haven't seen a U2 g955/0u firmware yet...
And sammobile has it as u1aqk3 for vzw so tmb should be u1qk4.
Can you double check what you flashed?

podagee said:
So im wondering if anyone has repair firmwares for the USA SM_G955U. i recently installed a U2QK4 update OTAusing ADB from the ATT section and everything went bad from there. I was told i may not be able to downgrade but thats not the problem. {screaming redacted }
Click to expand...
Click to collapse
1. A good, new odin that will flash an official package.
https://odindownload.com/download/Odin3_v3.12.3.zip
2.Not the latest firmware, but a solid base (which you can then use to OTA updated to the latest patches)
https://www.sammobile.com/firmwares/galaxy-s8/SM-G955U/ATT/download/G955USQU1AQC9/129108/
Download both, use the former to flash the latter. Let us know how it goes!
EDIT: AND IF IT DOESN'T WORK! Please attach a screenshot of Odin and a picture of your phone (if you can). It'll help us get you squared away.

partcyborg said:
Few things:
U2QK4? I don't think that's a model number for a firmware... We certainly haven't seen a U2 g955/0u firmware yet...
And sammobile has it as u1aqk3 for vzw so tmb should be u1qk4.
Can you double check what you flashed?
Click to expand...
Click to collapse
I'm pretty sure norbarb, the provider of the U2BQK4 firmware knew that it was for the N950(note 8) and posted it in his adb update thread. I bought a new motherboard and will not ever update from that person again because of what has happened. I am not bashing him I just don't want to go through this mess again. and so far I've gotten a bootloader's to flash by using the.elf files from a u2b file from the note 8. Still no recovery and stuck at the bootloader's screen. Can still get into download mode.
The quickest fix I know is for a new motherboard.
Thanks guys

podagee said:
I'm pretty sure norbarb, the provider of the U2BQK4 firmware knew that it was for the N950(note 8) and posted it in his adb update thread. I bought a new motherboard and will not ever update from that person again because of what has happened. I am not bashing him I just don't want to go through this mess again. and so far I've gotten a bootloader's to flash by using the.elf files from a u2b file from the note 8. Still no recovery and stuck at the bootloader's screen. Can still get into download mode.
The quickest fix I know is for a new motherboard.
Thanks guys
Click to expand...
Click to collapse
You wouldn't be able to flash n8 firmware on a s8. Secure boot / Knox would stop you

partcyborg said:
You wouldn't be able to flash n8 firmware on a s8. Secure boot / Knox would stop you
Click to expand...
Click to collapse
Well idk know ALL I KNOW IS HE PROVIDED A U2BQK4 FILE AND I CANT FIND IT ANYWHERE ELSE EXCEPT ON A NOTE 8 !

podagee said:
Well idk know ALL I KNOW IS HE PROVIDED A U2BQK4 FILE AND I CANT FIND IT ANYWHERE ELSE EXCEPT ON A NOTE 8 !
Click to expand...
Click to collapse
Lol no need to capslock everywhere. Just download and flash stock and it will be fine. You can get to download mode right?
---------- Post added at 10:50 PM ---------- Previous post was at 10:47 PM ----------
eregev said:
1. A good, new odin that will flash an official package.
https://odindownload.com/download/Odin3_v3.12.3.zip
2.Not the latest firmware, but a solid base (which you can then use to OTA updated to the latest patches)
https://www.sammobile.com/firmwares/galaxy-s8/SM-G955U/ATT/download/G955USQU1AQC9/129108/
Download both, use the former to flash the latter. Let us know how it goes!
EDIT: AND IF IT DOESN'T WORK! Please attach a screenshot of Odin and a picture of your phone (if you can). It'll help us get you squared away.
Click to expand...
Click to collapse
All due respect but aqc9 is ancient and full of bugs that will make your experience with your phone sub par. Just go to updato.com and download the latest version for your carrier and device. By default updato is slow but if you use a download manager it flies. I can get 3MB/s easily

i honestly dont think people read in these forums. But everyone surely knows everything.
I am starting to get annoyed with that. PLEASE READ CAREFULLY:
1. i have flashed a rom provided by norbarb in the AT&T forums(he took it down) G955USA1US2BQK4,
2. after installing that update, phone went haywire, encrypted and erased everything except download mode,
3. ABSOLUTELY NO RECOVERY AT ALL,
4. nothing will flash over, NOTHING!! phone error: SW REV ablFAILED 1>binary >2 ODIN error. FAIL(AUTH) and FAIL dismatch model in non-modded ODIN and modded odin.
5. i got a bootloader to flash using abl files from a U2b (meaning bootloader 2) from another file U2BQK5 provided from a third party pm.
6. stuck in a bootloop at bootloader screen,
7. STILL NOTHING FLASHES OVER.
8. EDL cable needed per eli, went ahead and ordered another motherboard.
IF ANYONE CARES OR DECIDES TO BADGER ABOUT REPAIR FIRMWARE, PLEASE CHECK OUT GSM FORUMS, THERE ARE OTHER FORUMS WITH USEFUL INFORMATION ABOUT REPAIR FIRMWARES.
thank you all for your help. i just went ahead and ordered another motherboard cause i found it easier and less stressful to deal with less people who do not read the OP.

partcyborg said:
Lol no need to capslock everywhere. Just download and flash stock and it will be fine. You can get to download mode right?
---------- Post added at 10:50 PM ---------- Previous post was at 10:47 PM ----------
All due respect but aqc9 is ancient and full of bugs that will make your experience with your phone sub par. Just go to updato.com and download the latest version for your carrier and device. By default updato is slow but if you use a download manager it flies. I can get 3MB/s easily
Click to expand...
Click to collapse
yes i can but nothing will flash

podagee said:
yes i can but nothing will flash
Click to expand...
Click to collapse
My friend. You keep saying you download stuff from PM or from other sources yet it doesn't seem like you have bothered to try any of the links I or others on here have posted for you. Especially trying the latest Odin can help with software mismatch errors.
---------- Post added at 05:44 AM ---------- Previous post was at 05:41 AM ----------
partcyborg said:
Lol no need to capslock everywhere. Just download and flash stock and it will be fine. You can get to download mode right?
---------- Post added at 10:50 PM ---------- Previous post was at 10:47 PM ----------
All due respect but aqc9 is ancient and full of bugs that will make your experience with your phone sub par. Just go to updato.com and download the latest version for your carrier and device. By default updato is slow but if you use a download manager it flies. I can get 3MB/s easily
Click to expand...
Click to collapse
No you're right it is ancient BUT it does have a direct update path straight to last month's security patch. And, maybe most importantly, OP could be using an older ODIN and hasn't tried the new one so I figured an older firmware has best shot at being compatible, he can OTA from there.

eregev said:
My friend. You keep saying you download stuff from PM or from other sources yet it doesn't seem like you have bothered to try any of the links I or others on here have posted for you. Especially trying the latest Odin can help with software mismatch errors.
---------- Post added at 05:44 AM ---------- Previous post was at 05:41 AM ----------
No you're right it is ancient BUT it does have a direct update path straight to last month's security patch. And, maybe most importantly, OP could be using an older ODIN and hasn't tried the new one so I figured an older firmware has best shot at being compatible, he can OTA from there.
Click to expand...
Click to collapse
hey bro, just to clarify with you i have flashed every file that there is from the links provided and from the forums i have about 8 copies of each file haha looks like i wont be running out soon. seems like the reason it crashed is the memory test that the rom i flashed inflated too much. i think it damaged my board which is okay i have another coming.

podagee said:
hey bro, just to clarify with you i have flashed every file that there is from the links provided and from the forums i have about 8 copies of each file haha looks like i wont be running out soon. seems like the reason it crashed is the memory test that the rom i flashed inflated too much. i think it damaged my board which is okay i have another coming.
Click to expand...
Click to collapse
Say what now? What made you think it was the memory test? What made you think it was the board or an actual hardware issue with the phone? A memory test can't 'inflate' anything much less can it damage your memory or the actual board.
I had a problem with my device from a badly restored backup where my modem would crash the machine to upload mode moments after booting on anything but a stock rom, and even that the radio didn't work and it would rebolt about 30 times to get to a state where it finished booting at all.
Needless to say I fixed it (I'm still here) but I essentially had to implement my own repair procedure and after about 30 hours total of working in it over two days I managed to get it working enough that I could get a rooted os booted and could then do another restore with a good backup.
If you problem sounds similar (iirc it was in the same general area) and it is then I'm afraid you wasted your money, as all you need is a restore of those partitions outside the rom part of your nvram.

partcyborg said:
Say what now? What made you think it was the memory test? What made you think it was the board or an actual hardware issue with the phone? A memory test can't 'inflate' anything much less can it damage your memory or the actual board.
I had a problem with my device from a badly restored backup where my modem would crash the machine to upload mode moments after booting on anything but a stock rom, and even that the radio didn't work and it would rebolt about 30 times to get to a state where it finished booting at all.
Needless to say I fixed it (I'm still here) but I essentially had to implement my own repair procedure and after about 30 hours total of working in it over two days I managed to get it working enough that I could get a rooted os booted and could then do another restore with a good backup.
If you problem sounds similar (iirc it was in the same general area) and it is then I'm afraid you wasted your money, as all you need is a restore of those partitions outside the rom part of your nvram.
Click to expand...
Click to collapse
I've been messaging with Eli and he said an EDL cable would fix the problem as it needs the deep flash. What would be your suggestion? I have been trying everything and I noticed somewhere saying windows 8 had problems with Odin software so I am currently installing a fresh copy of windows 10. Any suggestions would be appreciated

podagee said:
I've been messaging with Eli and he said an EDL cable would fix the problem as it needs the deep flash. What would be your suggestion? I have been trying everything and I noticed somewhere saying windows 8 had problems with Odin software so I am currently installing a fresh copy of windows 10. Any suggestions would be appreciated
Click to expand...
Click to collapse
Snapdragon right?

partcyborg said:
Snapdragon right?
Click to expand...
Click to collapse
Yes snapdragon G955U AT&T

podagee said:
I've been messaging with Eli and he said an EDL cable would fix the problem as it needs the deep flash. What would be your suggestion? I have been trying everything and I noticed somewhere saying windows 8 had problems with Odin software so I am currently installing a fresh copy of windows 10. Any suggestions would be appreciated
Click to expand...
Click to collapse
.
I thought windoze 10 was the "worst" because of the driver signing gotcha . This was true of me and my alibaba smart watch . For me, I had to resurrect an old h.d. with windoze 7 . . .

old_fart said:
.
I thought windoze 10 was the "worst" because of the driver signing gotcha . This was true of me and my alibaba smart watch . For me, I had to resurrect an old h.d. with windoze 7 . . .
Click to expand...
Click to collapse
Yeah windows 7 is the best but I kinda like the metro theme with 8 and 10, though 8 is bad........

partcyborg said:
Say what now? What made you think it was the memory test? What made you think it was the board or an actual hardware issue with the phone? A memory test can't 'inflate' anything much less can it damage your memory or the actual board.
I had a problem with my device from a badly restored backup where my modem would crash the machine to upload mode moments after booting on anything but a stock rom, and even that the radio didn't work and it would rebolt about 30 times to get to a state where it finished booting at all.
Needless to say I fixed it (I'm still here) but I essentially had to implement my own repair procedure and after about 30 hours total of working in it over two days I managed to get it working enough that I could get a rooted os booted and could then do another restore with a good backup.
If you problem sounds similar (iirc it was in the same general area) and it is then I'm afraid you wasted your money, as all you need is a restore of those partitions outside the rom part of your nvram.
Click to expand...
Click to collapse
still waiting on a reply from you