Database Info

[ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11)

This will flash the stock kernel, modem, system, dbdata and cache. There's no need for a pit since we do not have any other OS versions to flash yet that would re-partition your device.
Instructions:
1) Make sure the drivers for the Infuse 4G are installed.
2) Please unzip the .zip file.
3) Run Odin3 v1.81.exe (as administrator if you are on Windows 7)
4) Place your phone into download mode (pull battery, press and hold both Volume keys, put battery in and plug the USB cable in)
5) Make sure your phone shows up in Odin as COM##
5) Click the PDA button and choose the .tar.md5 file in the .zip.
6) Press Start.
7) After it completes, it will reboot your device and should boot up like normal. If it fails on flash see FAQ Question 4 below!
There is ALWAYS risk when flashing your device. Unfortunately, I will not be held responsible. Please use this as a means to get back to stock if something happens.
* DO NOT FLASH PIT (PIT not included).
* DO NOT CHECK ANYTHING IN ODIN EXCEPT "AUTO-REBOOT" AND "F. RESET TIME" (should be checked by default)
FAQ:
Question 1: Why does it have .md5 at the end?
Answer: Its in md5 format so in case your download is corrupted, you dont brick your phone.
Question 2: Can I rename it to just .tar and flash?
Answer: DO NOT rename it from md5 format. If it says the md5 sum is invalid, then it will not flash. Just re-download again and try again.
Question 3: Why does it give an error if i try to open in in 7zip/WinRAR/WinZip?
Answer: It should! Windows doesn't recognize when an md5sum is written to the end of a file. Don't panic!
Question 4: It passed the md5sum check, but failed writing on factoryfs. What do I do?!?
Answer: This is exactly what happened to me. Don't panic. Follow these steps exactly:
* Hold the power button to turn off.
* Make sure Odin is still open.
* Plug the USB cable in and hold the volume keys down at the same time. You will be on the screen with a "Phone ! PC" screen.
* Press Start on Odin.
* Once it completes, it will boot up into recovery. Don't worry about wiping cache or user data. Just choose "Reboot Device".
This flash takes quite a long period of time due to the size of the files. I'd say it took me 5 - 10 minutes for the flash to complete. Be patient! Afterwards it booted up with recovery, and chose Reboot Now.
Thanks:
* codeworkx - for the advice and assistance!
* beatblaster - First tester after a bad framework-res update.
* Realityfalse - Second tester
* dotsad - Third tester
* imnuts - Very Helpful advice and instructions for Odin installations!
* My Infuse - Fourth and final tester (thought I lost her for a minute there!)
Download Links:
UCKD5 Stock + Root + 3e Modded Recovery
UCKD5 100% Stock (no root, no 3e Modded Recovery)

What a life saver

I second that, up and running again
Sent from my SAMSUNG-SGH-I997 using XDA App

not working
sitting at Samsung boot screen for 20 minutes now! Cant get recovery. any ideas?
Tried re-flashing multiple times. downloaded from mirror. same thing. reboots after odin is successful then sits endlessly at Samsung boot logo.

rblankman said:
sitting at Samsung boot screen for 20 minutes now! Cant get recovery. any ideas?
Tried re-flashing multiple times. downloaded from mirror. same thing. reboots after odin is successful then sits endlessly at Samsung boot logo.
Click to expand...
Click to collapse
go into the thread from lost1 with the stock rom and find the pit.pit file in the "additional" download. try that with repartition selected.
http://forum.xda-developers.com/showthread.php?t=1084837

Though it's too late for me to try it myself, I'm sure this will be a great help to everyone! Thanks so much!
Sent from my SAMSUNG-SGH-I997 using XDA App

Dani897 said:
go into the thread from lost1 with the stock rom and find the pit.pit file in the "additional" download. try that with repartition selected.
http://forum.xda-developers.com/showthread.php?t=1084837
Click to expand...
Click to collapse
same thing what i have to do ?

well use the .tar file in this thread, put it in the pda slot in odin. put the phone in download mode and connect it to the computer. have auto reboot selected. and hit start.
if that doesnt work then try it again except put pit.pit in the pit slot and the .tar from this thread in the phone slot, select repartition, put phone in download mode, connect it to the computer and hit start.

Dani897 said:
well use the .tar file in this thread, put it in the pda slot in odin. put the phone in download mode and connect it to the computer. have auto reboot selected. and hit start.
if that doesnt work then try it again except put pit.pit in the pit slot and the .tar from this thread in the phone slot, select repartition, put phone in download mode, connect it to the computer and hit start.
Click to expand...
Click to collapse
did you fix your phone and work fine now or still his lock Bootloader ?

no it was someone else. i have fixed my captivate many time though. that would have normally been my next step if it didnt work the first time.

rblankman said:
sitting at Samsung boot screen for 20 minutes now! Cant get recovery. any ideas?
Tried re-flashing multiple times. downloaded from mirror. same thing. reboots after odin is successful then sits endlessly at Samsung boot logo.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I997 using XDA App
Can you wipe all user data and wipe cache from recovery (power phone off via power button or battery pull, hold both volune keys down, then hold power down until samsung appears on the screen and let go of ONLY power)? That should get you to boot.
This happened to beatblaster when we tested. Then he did the data wipes in recovery and booted up fine.

cant get recovery at all. tried all above. pit doesnt work

Thanks
Thanks for doing this, I am trying to learn how to dev on android and Ubuntu and was installing and also waiting for a way back before doing anything.

rblankman said:
cant get recovery at all. tried all above. pit doesnt work
Click to expand...
Click to collapse
Have you tried to wipe data and cache yet?

rblankman said:
cant get recovery at all. tried all above. pit doesnt work
Click to expand...
Click to collapse
Was your phone bricked before trying this? If so, how did you brick it?
Sent from my SAMSUNG-SGH-I997 using XDA App

wasnt bricked. wanted to try odin restore.

how can I clear data and cache without recovery? is there a way in ODIN?

rblankman said:
how can I clear data and cache without recovery? is there a way in ODIN?
Click to expand...
Click to collapse
TO get into recovery to wipe data and cache, unplug your phone from the USB cable then make sure the phone is powered off. While the device is powered off press and hold the 2 volume buttons then while holding those 2 volume buttons down press and hold the power button. That will get you into recovery. WHile in there, you can wipe user data and wipe cache. Give that a go.

understood. However, as I was able to successfuly get into recovery by that method before attempting the ODIN restore, It will not enter recovery after ODIN flashed the stock.

rblankman said:
understood. However, as I was able to successfuly get into recovery by that method before attempting the ODIN restore, It will not enter recovery after ODIN flashed the stock.
Click to expand...
Click to collapse
Whoa. The only thing I can recommend from here is to try to flash via ODIN again or take the brick back to the store and swap for new. Next time, I'd recommend not fixing anything unless it's broken

[Q] Infuse Bricked even after GTG method!

Hey guys so what happened was that I was trying to root my phone through Gingerbread and Odin (as my infuse is Rogers). But I forgot to put in a SD card so now my phone is stuck in reboot loop! I have tried everything you guys have mentioned online! I cleared the user data but no avail. I inserted a SD card, even put on the SGHI997 rom, inserted the folders voodoo and disable-lagfix and still didnt work. I tried unbricking it via GTG but instead my rogers is gone and now I have AT&T and still in a loop! HELP!

Did you look at this post to see if it helps.
http://forum.xda-developers.com/showthread.php?t=1205381

yup i did. It was the GTG process i mentioned that i tired before. the bootlooping has stopped but know is stuck on the samsung screen :S i left at the screen for 30 mins now still nothing. i cant even enter recovery mode anymore

u can not get into download mode??

yeah i still can

Were you able Odin back to stock?

not really, these are the results of odin:
GTG odin process: stuck at samsung screen. Cannot enter recovery mode.
Gingerbread process: goes to clockwordmod recovery (red txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
Rogers stock: goes to andriod recovery mode (blue txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
so no phone does not go back normal functioning self

sharkray said:
not really, these are the results of odin:
GTG odin process: stuck at samsung screen. Cannot enter recovery mode.
Gingerbread process: goes to clockwordmod recovery (red txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
Rogers stock: goes to andriod recovery mode (blue txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
so no phone does not go back normal functioning self
Click to expand...
Click to collapse
What Rom were using?
Try checking repartion when you use Odin.

Corvette Dave said:
What Rom were using?
Try checking repartion when you use Odin.
Click to expand...
Click to collapse
From recovery you should be able to get to download.
Try this link with the option to get root & 3e recovery.
http://forum.xda-developers.com/showthread.php?t=1092021
It sounds like you do not have modified 3e installed so it will check for sig?
from there if you install packages 2X you can get to CWM and flash what you will.....
EDIT: Sorry, I see you are able to get to CWM
can you not put a new rom on the SD and flash it? Or start over again with a fresh stock in case there was a glitch in the first install?

I am in the same situation and have the same problem too, i"ve looked lots of post and tried different method,,
even GTG's method it still in boot loop!!!!T^T
can anyone help

Corvette Dave said:
What Rom were using?
Try checking repartion when you use Odin.
Click to expand...
Click to collapse
Hey when you say rom is assume you mean pda kernal files that come with odin and such? Then those would be PDA_ROGERS_UXKG3.tar.md5, PDA_Infuse_Gingerbread.tar.md5, the files the come in GTG unbrick.
I have also did repartion, but it did nothing.
I you mean rom by the SGHI997 rom i tried that too
Edit: Okay so I have been searching online and discovered you need put the room onto the internal sd card. But i dont see how i can do that considering my phone goes to recovery mode straight away
SNadler said:
From recovery you should be able to get to download.
Try this link with the option to get root & 3e recovery.
http://forum.xda-developers.com/showthread.php?t=1092021
It sounds like you do not have modified 3e installed so it will check for sig?
from there if you install packages 2X you can get to CWM and flash what you will.....
EDIT: Sorry, I see you are able to get to CWM
can you not put a new rom on the SD and flash it? Or start over again with a fresh stock in case there was a glitch in the first install?
Click to expand...
Click to collapse
Okay so I have been searching online and discovered you need put the room onto the internal sd card. But i dont see how i can do that considering my phone goes to recovery mode straight away. Even using odin to flash a fresh stock gives same problem

I'd like to bring the UnBrickable mod to this platform which will allow us to flash bootloaders to UnBrickably modded devices.. and seriously mod the crap out of the firmware... If you decide to turn it in for repair, consider PMing me so I can do some reverse engineering on it and then you can turn it in for not being able to turn on
Your device likey requires a PIT flash just so you know.

sharkray said:
Okay so I have been searching online and discovered you need put the room onto the internal sd card. But i dont see how i can do that considering my phone goes to recovery mode straight away. Even using odin to flash a fresh stock gives same problem
Click to expand...
Click to collapse
In CWM (red) under "mounts and Storage, select "Mount USB". Of course you are connect to your computer when you do this and in windows an external drive should become available. Place the zip file on the root of that drive.
Once copied, disconnect from windows first then unmout in CWM. from here you can go directly to and install from zip.
Hope that makes sense.
6

hey i tired what you said. i did a few times nothing came. then on my 4th try the driver showed up on my computer but it said 'please insert drive.' i reset and tried again the drive didnt show up

Remove the sim card and try again. Also,you can always copy a rom to an sdcard and install that in your Infuse.
Cranky...

hey i tried what you said but same result. i cant put on rom on because they mass storage does not show on my pc :S after the odd time of resetting and entering recovery mode, it connects but it says 'insert drive'

follow this link,, i recoverd my infuse 4G using this rom!!!!!!!
THX GTG very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=1193927

AdamOutler said:
I'd like to bring the UnBrickable mod to this platform which will allow us to flash bootloaders to UnBrickably modded devices.. and seriously mod the crap out of the firmware... If you decide to turn it in for repair, consider PMing me so I can do some reverse engineering on it and then you can turn it in for not being able to turn on
Your device likey requires a PIT flash just so you know.
Click to expand...
Click to collapse
yes try a pit flash with repartition selected, it might fix it. theses types of bricks have been rare on the infuse and many people dont have experience with them. the available pit is packaged with the att ultimate unbrick but you should probably use it with the rogers odin firmware.

001100 said:
follow this link,, i recoverd my infuse 4G using this rom!!!!!!!
THX GTG very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=1193927
Click to expand...
Click to collapse
OMGGGGGGGGGGGGGG YOU ROCK!!!! DUDE! IT works fine and its rooted! Thank you so much!
And thank you everyone else for taking the time to help me out and which ever way you could! This forum is pretty awesome thanks guys!

sharkray said:
OMGGGGGGGGGGGGGG YOU ROCK!!!! DUDE! IT works fine and its rooted! Thank you so much!
And thank you everyone else for taking the time to help me out and which ever way you could! This forum is pretty awesome thanks guys!
Click to expand...
Click to collapse
Sorry it took so long. I'll try to get in touch with GTG to make sure that his unbrick threads are more clear as to which device they are appropriate for.
UCKD5/E3 unbricks will only work on AT&T Infuses
UXKG3 will only work on Rogers Infuses
Custom Gingerbread ROMs will work on both, but there are no Odin-flashable packages for these.

[Q] Stuck trying to CwM install Black test 1.6 rc1.zip ?

Was stock KJ6, rooted w/DooMLoRD_v3.
Didn't have "CwM Recovery" so used sgs-kernel-flasher-v1.6.2.apk and got on sms-T959V-KJ6-v0.1.0-unsigned-update.zip
Then used CwM to flash VahallaBlack.zip and I bricked.
Got back with Odin3 v1.7(stock+Voodoo-T959VKI3.tar)
Phone info shows my kernel still sms-T959V-KJ6-v0.1.0 after the factory/data reset.
Where to from here-I just get (E: can't install vahallablack.zip -bad)
I want to use CwM - I want to install the new Vahalla Black.

Download the KJ6 version from here:
http://forum.xda-developers.com/showthread.php?t=1358498
Then you'll have a stock rom with CWM, you should also try redownloading the valhalla zip file in case it was a bad download.

Oh no. It was up on that KJ6-beta2d and I did the following instructions on first boot-
But I suggest if you are using CWM to back up your sdcard and do a battery pull after you see the boot animation. Boot into recovery and repartition your sdcard to have >=2048M of ext2.
This will make sure you have no problems converting to ext4 from rfs and visa-versa.
It will not go back into recovery now. Only screen coming up is icons of "phone..triangle..computer" and will not connect via USB.
Guess I'm stuck again.........help.

If your in download mode then use this to flash stock KJ6 onto it.
http://forum.xda-developers.com/showthread.php?t=1358498

Yes, but now windows 7 doesn't recognise phone and drivers will not connect Odin and/or Heimdall

Download heimdall from here https://github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-suite-1.3.1-win32.zip
Go into the drivers folder
Run 'Zadig'
Click on options then list all usb devices
Drop the bar down and click "Samsung Usb Composite Device"
And then select 'Install driver'

After rebooting and trying again it connected but failed at installing factory FS. Now just stuck at that spot with no way out.....
I will try new driver you suggest.
Bib question- will 32 bit work? I'm 64 bit?

Heimdall One Click should then recognize your phone.

Nope, it shows up as an unknown device
It was recognising it before the factoryFS error caused me to disconnect during download mode (2)twice.

Do a battery pull and give it one last try.
If it doesn't work then I don't know what to tell you.

OK thanks. Been pulling the battery alot.

Hey SUCCESSFUL! Trying again and again etc finally paid off -again.
CwM Voodo LAgfix Rec v3.0.3.8x
KJ6-beta2d (I hope)phone info now
showing Kernel v:2.6.35.7-T959VUVKJ6-CL694130
Do I need verify this ?

Now on to my goal. Anything special I need from this point before I flash VahallaBlack ROM? Don't need to name it update.zip .....
black test 1.6 rc1.zip

Glad I can help all you need to do now is simply clear cache and dalvik cache and flash.

Bobrt said:
It will not go back into recovery now. Only screen coming up is icons of "phone..triangle..computer" and will not connect via USB.
Guess I'm stuck again.........help.
Click to expand...
Click to collapse
This is just another screen for download mode.
Bobrt said:
Nope, it shows up as an unknown device
It was recognising it before the factoryFS error caused me to disconnect during download mode (2)twice.
Click to expand...
Click to collapse
If you made it to the fail before you unplugged it your still ok. Next time Get into download mode by
1 pulling your battery
2 hold Vol up Vol down at the same time
3 plug in USB to computer and phone
4 re insert Battery and continue to hold the Vol buttons until your phone does something.
At this point if your phone does anything you are most likely in download mode and can recover. Just keep trying.
Edit: see you got it fixed persistence is sometimes key
Sent from my SGH-T959V using XDA App

FAILED FLASH but still running fine. Help w/flash please.
When I wipe Dalvik get cache wipe complete.
E:unknown volume for path [/sd-ext]
set UMMU
Then flash and it aborts with:
E:Can't open /sdcard/black test 1.6 rc1.zip(bad)
Happened before.....suggestions?

Bobrt said:
FAILED FLASH but still running fine. Help w/flash please.
When I wipe Dalvik get cache wipe complete.
E:unknown volume for path [/sd-ext]
set UMMU
Then flash and it aborts with:
E:Can't open /sdcard/black test 1.6 rc1.zip(bad)
Happened before.....suggestions?
Click to expand...
Click to collapse
Unknown path error is no big deal. If it can't open the zip you probably have a bad download. Go download it again.
Sent from my SGH-T959V using XDA App

This is the 3rd time I've downloaded it for this same reason and following this same suggestion. Can you think of anything else?
In the meantime I'm planning on flashing VahallaFinal
ps, everytime I open phone for sd-storage mode I get a windows message as follows:
Please insert the last disk of the multi-volume set and click ok to continue.

Bobrt said:
This is the 3rd time I've downloaded it for this same reason and following this same suggestion. Can you think of anything else?
In the meantime I'm planning on flashing VahallaFinal
Click to expand...
Click to collapse
That sucks. If your downloading it directly to your device try downloading it from a computer then transferring it to your sd card. Or vice versa. let me know how it goes
Sent from my SGH-T959V using XDA App

ok, will try OTA direct. Have tried via USB, and then microsd in adapter directly.

[Q] Bricked phone

Hi, I was on CM9 ALPHA8 and I flashed with odin 1.85 and 3.04 the latest I9003XWLF2_I9003XXLE4_I9003ITVLF2_ stock rom used as PDA, but each time I pressed Start it was stuck in setup connection..., then I plugged battery off and now my phone doesn't boot up, and I can't go in recovery/download mode, anyone help ? I tried the trick pressing the hard-reset button behind the phone with a pin but no success, even tried by removing battery, pressing the buttons for download mode and put battery back in, all it did was windows looking for the omap3630 drivers .
Each time I remove battery and put battery back in (with usb plugged) I heard the windows sound.
Thanks for your help...

Make sure phone drivers are installed on ur pc.
Or either kies is installed.
Sent from my GT-I9003 using xda premium

Have flash xxkpe than only xxle4
Sent from my GT-I9003 using Tapatalk 2

chongns said:
Have flash xxkpe than only xxle4
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
Can't flash anything without download mode...

adaba said:
Can't flash anything without download mode...
Click to expand...
Click to collapse
You must do following things
1. install latest kies & restart pc.
2. Use v1.83 odin version.
3. Check whether firmware file u have downloaded is correct or currupted. Its better to download it again.
4. check whether u are applying 3 combination button in correct manner or not to boot in download mode. Most of the time people do mistake in this step.

vishal24387 said:
You must do following things
1. install latest kies & restart pc.
2. Use v1.83 odin version.
3. Check whether firmware file u have downloaded is correct or currupted. Its better to download it again.
4. check whether u are applying 3 combination button in correct manner or not to boot in download mode. Most of the time people do mistake in this step.
Click to expand...
Click to collapse
I've flashed over 50 times and yes I know how to put it in download mode...
Anyone help?

jig usb its the solution force the download mode look in google

Stuck on System Recovery Screen

I bought a Samsung Galaxy S a week ago and now it seems bricked. Here is what happened:
1. I got it rooted yesterday using "SuperOneClick".
2. Then I installed "Basic with a Twist SGS4G KJ6 Kernel" on it. Since SGH 4G Wiki recommeded having the stock Gingerbread ROM flashed at least once prior to flashing any other Gingerbread ROMs, I downloaded " bhundven's Back to Stock Heimdall One-Click" and installed the latest Java and Visual c++ runtime.
3. According to "lumin30's Heimdall One-Click for Dummies", I downloaded "usbdeview-x64.zip" and tried to uninstall anything that has Samsung and Android related. However, some of them cannot be uninstalled by it and I had to move on. I put my phone in Download Mode and installed the "SAMSUNG USB Composite Device" drivers using Zadig. I got it flashed successfully and booted into the Gingerbread ROM.
4. Bad things happened when I tried to flash the bootloaders. It stuck at certain step for at least half an hour and I decided to pull the USB cable out.
5. I tried to flashed it again using the same approachdescribed above. I got into the download mode and flashed hte device. But during the reboot, it stuck on the System Recovery Screen, saying
Android system recovery <3e>
Samsung Recovery Utils
- for BML -
Enter: OK Key, Select: Vol UP / Vol Down
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
# Manual Mode#
6. I tried 2 different computers and all USB ports, and still it would eventually stick on the System Recovery Screen.
I am definitely a noob, and I don't see many posts discussing what I described above (one post suggested using Odin, but I am not sure where to find the right download link). I wonder whether there is a way to get my phone back working (simply jump out of the System Recovery Screen?) using Heimdall One-Click. Or I should try Odin instead?
Thanks!

Try it again with a different USB port, cable, computer, etc. Get into download mode by holding vol up and vol down while the phone is completely off and plugging in the USB cable. Then flash once without bootloaders, then when the phone begins to reboot (after the update completes in recovery mode), pull the battery, get back into download mode, then flash with bootloaders.
Sent from my SGH-T959V using xda app-developers app

Thank for the suggestions. I have tried 2 computers and 5 different USB ports so far.
I can always get into download mode and flash without bootloaders. After that the phone will reboot and stick on the System Recovery Screen I described above. I can never reach the next step--flash with bootloaders.
I wonder whether there is anything missing during the reboot process?
cpkelley94 said:
Try it again with a different USB port, cable, computer, etc. Get into download mode by holding vol up and vol down while the phone is completely off and plugging in the USB cable. Then flash once without bootloaders, then when the phone begins to reboot (after the update completes in recovery mode), pull the battery, get back into download mode, then flash with bootloaders.
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse

rockyhigh said:
Thank for the suggestions. I have tried 2 computers and 5 different USB ports so far.
I can always get into download mode and flash without bootloaders. After that the phone will reboot and stick on the System Recovery Screen I described above. I can never reach the next step--flash with bootloaders.
I wonder whether there is anything missing during the reboot process?
Click to expand...
Click to collapse
What happens when you try to flash bootloaders? It hangs?
Sent from my SGH-T959V using xda app-developers app

Yes, in the very beginning I successfully flashed the ROM and after reboot I got a fresh working phone. Then the device hung there when I try to flash bootloaders.
Now I can still flash the ROM but after reboot, it will stick at system recovery screen and won't work anymore.
cpkelley94 said:
What happens when you try to flash bootloaders? It hangs?
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse

Have you tried flashing bootloaders again? Pull the battery and get back into download mode.
Sent from my SGH-T959V using xda app-developers app

Stop. Remove the heimdall drivers using the usbreview. Reboot your computer.
Goto this guide and follow the instructions.
http://forum.xda-developers.com/showthread.php?t=1223765
umlaaat had a similar issue and what is happening is your usb ports are not playing nicely with heimdall.

cpkelley94 and eollie,
Thank you very much for the help. Now it is working again.
What I did was:
1. Uninstall all the Samsung related drivers using [usbdeview-x32.zip] according to lumin's step by step guide.
2. reinstall "SAMSUNG USB Composite Device" driver using Zadig according to lumin's step by step guide.
3. Flash with Bootloaders. However, I want to point out that in my previous tries, I couldn't select "Flash Bootloaders" without doing step 1 and 2.
It is so great that I can try some custom ROMS tonight.
eollie said:
Stop. Remove the heimdall drivers using the usbreview. Reboot your computer.
Goto this guide and follow the instructions.
http://forum.xda-developers.com/showthread.php?t=1223765
umlaaat had a similar issue and what is happening is your usb ports are not playing nicely with heimdall.
Click to expand...
Click to collapse