Database Info

[Q] Can someone walk me through the steps on how to install CM7 on my Huawei Ascend?

Hello XDA fourm people! First of all, I want to say thank you to all the devs out there working hard to get us nice things on our phones
I am a noobie at flashing custom roms so I need a bit of help. I have a cricket Huawei Ascend running 2.1 update 1. I recently read about the CM7 rom that has been succesfully ported over to the ascend but I have no idea where to even start. My phone IS rooted using z4root, but i really want to install CM7.
I know you have to do a nandroid back up and then used clockwork mod? I have somewhat of an idea of what these things do, but I dont know how to use them or where to get them. Any help would be appreciated.
Lol and I know that some of you are looking at this rolling your eyes, but I'm just new and trying to get the hang of it.

prepaidandroid.org/index.php?title=CM7-Ascend
They make it where almost anyone can do this so if you have further questions feel free to ask as I have been bricking my phone and reflashing it back to normal since I bought it lol...also you might look into getting multiple custom ROMS at that same site as one is not really better than the other so you'll want to check out all of em at some point
Myself I have flashed Icarus 1.1 and CM7-Ascend-04052011 (also flashed the nightly release of this but just for a recovery reason which failed) I would suggest Icarus 1.1 if you want an extremely stable ROM that runs off the current system you have on your phone. CM7 is still a little unstable but I run it as an everyday driver because it uses 2.3.3 gingerbread and it also allows for system overclocking to 710mhz without the use of third party apps. Like I said though, test drive them all and have fun with it. Just make sure you make a factory back up and a back up directly after each launch of flashing just in case something does go wrong you can also go back to the bulky OS your running now ;-)

tony442 said:
prepaidandroid.org/index.php?title=CM7-Ascend
They make it where almost anyone can do this so if you have further questions feel free to ask as I have been bricking my phone and reflashing it back to normal since I bought it lol...also you might look into getting multiple custom ROMS at that same site as one is not really better than the other so you'll want to check out all of em at some point
Myself I have flashed Icarus 1.1 and CM7-Ascend-04052011 (also flashed the nightly release of this but just for a recovery reason which failed) I would suggest Icarus 1.1 if you want an extremely stable ROM that runs off the current system you have on your phone. CM7 is still a little unstable but I run it as an everyday driver because it uses 2.3.3 gingerbread and it also allows for system overclocking to 710mhz without the use of third party apps. Like I said though, test drive them all and have fun with it. Just make sure you make a factory back up and a back up directly after each launch of flashing just in case something does go wrong you can also go back to the bulky OS your running now ;-)
Click to expand...
Click to collapse
Thank you! I followed a thread that showed me how to flash CM7. It is buggy and unstable, but I love it! I've wanted to flash Icarus too, but i think Im going to play around with CM7 for a bit and see how it works out.

LinuxBozo experience of Ghostie.Napkinz

Just wanted to start off and say a BIG THANKS for LinuxBozo and his amazing infuse mod which lets us use the other samsung roms (JVQ restricted )
I have been experimenting ALOT with various roms and thought i would share some of which i have tested out so far, the only one which gave me some issues was Sensation 2.0 , seems like when you reboot, sometimes you get no netwrok, then reboot, and icons are missing, so its a question.
Obviously this isnt really an OFFICAL rom for the Infuse, but id like to know if anyone else has had nice experience or recommendations for use with this dude's rom.
Galaxy S I9000 ROMS
[ROM][07/07/2011] - Ryyu's EDB v1.3 [JVQ] -- New Improvements!
http://forum.xda-developers.com/showthread.php?t=1133395
[ROM] SpeedRom [JVQ][Fast & Stable] NEW NEW
http://forum.xda-developers.com/showthread.php?t=1189625
[ROM][19/7] GingerReal - V7.1.4 JVQ - Time to Downgrade - stability and speed
http://forum.xda-developers.com/showthread.php?t=1155623
[ROM] [22.07.2011] DarkyROM v10.2 ★ JVQ ★ What are you waiting for?
http://forum.xda-developers.com/showthread.php?t=814091
[ROM][02/08/2011] Tiramisu EVO 6.0/6.7 Summer Edition! JVP/JVQ BIG UPDATE OUT!
http://forum.xda-developers.com/showthread.php?t=1171476
Captivate Roms
[ROM][2.3.4][JVQ]Continuum v6.1 - v6.2 Beta Now Open!
http://forum.xda-developers.com/showthread.php?t=1136128
[ROM][2.3.4][JVQ][UPDATE: 7/31] DlevROM Version 4.2: Mods and Features Galore!
http://forum.xda-developers.com/showthread.php?t=1146176
{2.3.4 ROM} Mosaic VI {Team Phoenix}{7/30/2011}
http://forum.xda-developers.com/showthread.php?t=1061203
VIBRANT ROMS
[ROM] RevolutionRom JVQ Final Update 2 (2.3.4) 7.31.11 Definitely Fixed Bluetooth
http://forum.xda-developers.com/showthread.php?t=1192438

So this hack seems to be another way to get Gingerbread on your phone. Interesting.

I have been running Darky all day with no problems. Very fast and stable.
Sent from my GT-I9000 using XDA App

Just wanted to throw it out there I ran a JVP based ROM without issue for an hour or so. The only thing I had to do was add my APN settings back & all was well. Someone may need to test this a bit more but my experience went well.

Does the darky rom support HSPA+?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App

Auto-Android said:
Does the darky rom support HSPA+?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
Hellraiser uses the same Rogers RIL that Infused v2 does, so probably not. (RIL is one of the things that gets swapped out.)
It's often hard to tell for sure because many frameworks won't show HSPA+ even if the RIL/modem are operating in that mode. Hell, even our original Froyo ROMs were broken in that way - they displayed UMTS when in HSPA+ mode. (UMTS is plain vanilla 3G.)

GingerReal - V7.1.4 JVQ
Been running GingerReal V7.1.4 JVQ with Infusion GB kernel and I must say it's snappy. I have not had a single problem with anything. And from what I read Quadrant scores don't mean much, but I got a 3500 OC at 1.6. without Stagefright. I did'nt know Stagefright was til I Googled it. But my phone is very fast and I am very happy. Thanks Linux

Infiniti350GT said:
Just wanted to throw it out there I ran a JVP based ROM without issue for an hour or so. The only thing I had to do was add my APN settings back & all was well. Someone may need to test this a bit more but my experience went well.
Click to expand...
Click to collapse
Which ROM did you test for JVP , i might give it a whirl, i finally finished going through all those roms, The Vibrant rom wasnt very exciting, and seemed to lack the extended power menu drop down which has Reboot, recovery download mode and such, thats a big thing for me.
Darky was my favorite so far,I might try Sensation. If anyone wants to test out a couple JVP roms and try adding in the APN settings, lets see what comes up and post which rom you tested.
Thanks everyone for their input on this, im getting more interested now and i will be trying to use the Infusion Kernel with some of these roms and see if i get a performance boost.
Im not sure if its just me, but whenever i reboot ANY of those roms which are installed with Linux's software , it seems sometimes the icons on the app drawer l ike disappearing, then when i reboot, apps reappear, but the Network to ATT gets cut off, then i reboot again, and sometimes its normal..........Any ideas?

prasadudwadia said:
Which ROM did you test for JVP , i might give it a whirl, i finally finished going through all those roms, The Vibrant rom wasnt very exciting, and seemed to lack the extended power menu drop down which has Reboot, recovery download mode and such, thats a big thing for me.
Darky was my favorite so far,I might try Sensation. If anyone wants to test out a couple JVP roms and try adding in the APN settings, lets see what comes up and post which rom you tested.
Thanks everyone for their input on this, im getting more interested now and i will be trying to use the Infusion Kernel with some of these roms and see if i get a performance boost.
Im not sure if its just me, but whenever i reboot ANY of those roms which are installed with Linux's software , it seems sometimes the icons on the app drawer l ike disappearing, then when i reboot, apps reappear, but the Network to ATT gets cut off, then i reboot again, and sometimes its normal..........Any ideas?
Click to expand...
Click to collapse
BTW, the default behavior in Sensation is no extended power menu, but if you use the app "Theme Settings (included in the ROM) you can change this.
As to the other issues - that's a new one, I haven't seen it before.

prasadudwadia said:
Which ROM did you test for JVP , i might give it a whirl, i finally finished going through all those roms, The Vibrant rom wasnt very exciting, and seemed to lack the extended power menu drop down which has Reboot, recovery download mode and such, thats a big thing for me.
Darky was my favorite so far,I might try Sensation. If anyone wants to test out a couple JVP roms and try adding in the APN settings, lets see what comes up and post which rom you tested.
Thanks everyone for their input on this, im getting more interested now and i will be trying to use the Infusion Kernel with some of these roms and see if i get a performance boost.
Im not sure if its just me, but whenever i reboot ANY of those roms which are installed with Linux's software , it seems sometimes the icons on the app drawer l ike disappearing, then when i reboot, apps reappear, but the Network to ATT gets cut off, then i reboot again, and sometimes its normal..........Any ideas?
Click to expand...
Click to collapse
I ran Hawkish 4 http://forum.xda-developers.com/showthread.php?t=1032599
I chose it because I saw that the ROM included the background effect from the SGSII, which while I have the SGSII & this feature seems to throw my photos to the way over saturated side - its more appealing for home screen settings and every day use since everything just looked almost wet or gooey. But the setting didn't work I imagine a kernel conflict, but I'm sure this could be built into one of our ROMS later and I wouldn't mind helping out with putting it together.
Overall I thought this ROM was a little laggy for the phone, I'm sure there are others out there that could run MUCH better or smoother.
I find it funny that we get a stock phone and find it boring so we flash a brand new phone to something completely different within an hour and when the next phone comes out we want their stock stuff so we can see how it is on OUR phone...HAHAHA -addicted

Infiniti350GT said:
I ran Hawkish 4 http://forum.xda-developers.com/showthread.php?t=1032599
I chose it because I saw that the ROM included the background effect from the SGSII, which while I have the SGSII & this feature seems to throw my photos to the way over saturated side - its more appealing for home screen settings and every day use since everything just looked almost wet or gooey. But the setting didn't work I imagine a kernel conflict, but I'm sure this could be built into one of our ROMS later and I wouldn't mind helping out with putting it together.
Overall I thought this ROM was a little laggy for the phone, I'm sure there are others out there that could run MUCH better or smoother.
I find it funny that we get a stock phone and find it boring so we flash a brand new phone to something completely different within an hour and when the next phone comes out we want their stock stuff so we can see how it is on OUR phone...HAHAHA -addicted
Click to expand...
Click to collapse
I think those are controls for Voodoo Color which:
1) Is extremely difficult to implement on our device (significantly different screen)
2) Is not necessary on our device - our screen fixes most if not all of the problems VC was intended to fix.

Entropy512 said:
I think those are controls for Voodoo Color which:
1) Is extremely difficult to implement on our device (significantly different screen)
2) Is not necessary on our device - our screen fixes most if not all of the problems VC was intended to fix.
Click to expand...
Click to collapse
Yes sir, I believe you are exactly right. I normally don't like over saturation, but on a HUGE screen it looked great with some gooey gingerbread green stuff around it. My photography looked horrible especially HDR shots, worth it though. The colors on the SGSII and this phone are pretty different tho. But a lot to do with the same resolution on a smaller screen. The screen on the Infuse is a big (no pun) factor that held me to it rather than the SGSII

bigfau said:
Been running GingerReal V7.1.4 JVQ with Infusion GB kernel and I must say it's snappy. I have not had a single problem with anything. And from what I read Quadrant scores don't mean much, but I got a 3500 OC at 1.6. without Stagefright. I did'nt know Stagefright was til I Googled it. But my phone is very fast and I am very happy. Thanks Linux
Click to expand...
Click to collapse
i as well got the same results, but did you have a problem with the modem. mine would work for about 3 min and then i would no longer have network connection.
i had to change the modem to get it work really smooth, but yes this set is pretty good.

Infiniti350GT said:
Just wanted to throw it out there I ran a JVP based ROM without issue for an hour or so. The only thing I had to do was add my APN settings back & all was well. Someone may need to test this a bit more but my experience went well.
Click to expand...
Click to collapse
Man! I'm so upset. I flashed this ROM twice, but it would not boot. Did you flash from stock? I don't know what I did wrong.

tekgurl said:
Man! I'm so upset. I flashed this ROM twice, but it would not boot. Did you flash from stock? I don't know what I did wrong.
Click to expand...
Click to collapse
Okay heres me scenario, hope it helps understand.
1) started off with phone already rooted and such and previously had Infused V2.00 full., Downloaded a JVQ rom ( like Darky's ) , and then downloaded Linux Bozo's rom/mod ) Put both of the zips on the ROOT of the internal SD .
2) backup info and boot into Red recovery.( Shut off device, then hold Vol - and + while pressing power ), release power and continue holding both volume keys).
3) Perform the following
Wipe Data/Factory Reset, Wipe Cache partition, Wipe Dalvik Cache
Install zip from SD card and select the ROM you want to use
Do install from SD card again and this time select the Linux Bozo zip
4) Reboot and you will be in your rom after 10 minutes ( be patient, it takes time ). If you want better performance, install the Infuse GB Kernel. Get it here
http://forum.xda-developers.com/showthread.php?t=1212485
5) Enjoy the rom

prasadudwadia said:
Okay heres me scenario, hope it helps understand.
1) started off with phone already rooted and such and previously had Infused V2.00 full., Downloaded a JVQ rom ( like Darky's ) , and then downloaded Linux Bozo's rom/mod ) Put both of the zips on the ROOT of the internal SD .
2) backup info and boot into Red recovery.( Shut off device, then hold Vol - and + while pressing power ), release power and continue holding both volume keys).
3) Perform the following
Wipe Data/Factory Reset, Wipe Cache partition, Wipe Dalvik Cache
Install zip from SD card and select the ROM you want to use
Do install from SD card again and this time select the Linux Bozo zip
4) Reboot and you will be in your rom after 10 minutes ( be patient, it takes time ). If you want better performance, install the Infuse GB Kernel. Get it here
http://forum.xda-developers.com/showthread.php?t=1212485
5) Enjoy the rom
Click to expand...
Click to collapse
I've successfully flashed a JVQ Rom. I'm trying to figure out how Infiniti350 was able to flash a JVP Rom.

tekgurl said:
I've successfully flashed a JVQ Rom. I'm trying to figure out how Infiniti350 was able to flash a JVP Rom.
Click to expand...
Click to collapse
I just followed the exact instructions the OP posted up above. With 1 mishap, when I downloaded what I thought was the ROM....I only got the lock-screen (what happens when you read things way too fast & think you know what you did) which I already downloaded and flashed
I mounted the SD card while in recovery and pushed the file containing the ROM over to the phone - flashed it - flashed LinuzBozo's stuff - rebooted & things went well all I had to do was add APN's back.
I really like my current set up BUT I'll probably find something else, before I load the ROM I want I'll run this again with a JVP base and see how things go & defiantly let you guys know. Now I'm curious why it doesn't work for other people.

Infiniti350GT said:
I just followed the exact instructions the OP posted up above. With 1 mishap, when I downloaded what I thought was the ROM....I only got the lock-screen (what happens when you read things way too fast & think you know what you did) which I already downloaded and flashed
I mounted the SD card while in recovery and pushed the file containing the ROM over to the phone - flashed it - flashed LinuzBozo's stuff - rebooted & things went well all I had to do was add APN's back.
I really like my current set up BUT I'll probably find something else, before I load the ROM I want I'll run this again with a JVP base and see how things go & defiantly let you guys know. Now I'm curious why it doesn't work for other people.
Click to expand...
Click to collapse
I think sometimes people either have a bad flash or don't properly wipe data. Same reason lots of people randomly had problems with Infused. (I haven't tried JVP myself though.)

Well, i just finished wrapping up my favorite roms, and i keep jumping between the Sensation rom, and Darky's Rom .
BUT!
I always data wipe, clear cache, factory reset
Idk if this helps, but i saw theres a new Linuz BETA 6 , perhaps this might help problems that a few have been going through.
In closing, i really hope more ROMS designed for the Infuse come fast , i got a feeling with this new mod there will be many to come

Entropy512 said:
I think sometimes people either have a bad flash or don't properly wipe data. Same reason lots of people randomly had problems with Infused. (I haven't tried JVP myself though.)
Click to expand...
Click to collapse
This is a very good point. The data wipe is vital for the Infuse no matter what. I have tried it with and without the wipe & all sorts of very strange things go wrong at random. Market apps wont download - Errors when using data - Youtube errors - issues with email. Each time I did it different ones would act up too, never the same.
Full Wipe so far has fixed it without failure
*Edit - Full for me same as prasadudwadia said above - data, cache, and factory reset.

need help. experinced noob ;)

hey guys. Long story short, i had my first captivate for almost more than a year, rooted it and had all the fun with it. Then, the screen cracked, i used my insurance and got a new captivate. But, after 3 months of being super busy... I figured id rather just send the new (unrooted, uncracked) captivate back, get my refund, and go back to using my old captivate, that is already rooted has all my contacts and so on. Now....as i said its been quite a while, so i am definitely rusty. First question is that i remember that since i was rooted i was able to download apk files and install them onto my phone when it waas plugged into my pc. I definitely remember using a program and having to restart the phone and apply changes or something like that. But, i don't remember the name of the program nor how i am actually suppose to do it. Also if someone can point me in the right direction and tell me what update and what not i am supposed to be on. My captivate is just rooted with a lag fix i believe. Yet, its still really slow and laggy, even overclocked... So im hoping that the new updates will be more efficient; in being fast without taking up all my battery. in my "about phone" it reads:
firmware: 2.1 update 1
kernel version 2.6.29
[email protected]#voodoo_lagfix_3.0_v1.10
Build number: ECLAIR
sorry for being so ignorant. Its just that it has been a while, and i don't want to start off my current rooting experience on the wrong foot.

are you referring to "quickboot" for easy rebooting? you may also want to look into Autokiller memory to help kill the junk. I also used ryan's OCLF.
I like you ran a rooted captivate for the longest time. it worked decently but then I tried to go to Gingerbread. MISTAKE. it was laggy bad and very unstable (Used Cezar's ROM). I didnt like it. Flashed back to the 2.2 rom (supposedly stock) and it was terrible compared to how it was. lots of lag and just overall... YUCK.
so yesterday I got the guts to flash a custom rom. I was mad at the phone so I flipped thru several flavors and ended up putting the Phoenix Ultimate (JS7) on it. HOLY S**t Balls mom!!! it was super fast, extremely responsive and worked like a dream. took me a little while to do it, (I had to flash to 2.1 (you are there), root it, cyanogenmod, then Phoenix) but it is SOOOO worth it. super fast now. my wife is asking me to do hers...ugh...
also, all the animations, graphics and just in general. it feels like I got a brand new phone. I could not be happier

thanks for the reply. Haha sounds like you have an iphone status phone now that's what im shooting for; something fast and reliable. Im going to wait and see what the majority of people like on they're captivates. So i am waiting on standby until i know exactly what and how to do it. And no, the program i believe was only on my computer. i would plug in my phone, drop in the apk file.,remove the phone, and do that recovery mode reboot thing on my phone so that the application i just dropped in installs. Sorry if what im saying doesn't make sense like I've said its been a while -.-

the program you are thinking of is the sideload wonder machine
and yes you are on a very outdated version of android, 2.1 (eclair) there has been an official update to 2.2 (froyo) and also many leaks of 2.3.x(gingerbread) but nothing officially from at&t since froyo.
noone can really tell you what you will like best, you will have to do what the rest of us do and read, read, read, then read a bit more, flash a few to try and pick what you like the best....

thank you! it was SWM.
NOW
what is MIUI, cm7 and pinnacle? custom flashes or something? i am also running my current root with launcher pro. Most of everyone on this thread seem happy with their setup as far as smoothness,responsiveness, and battery life go, which is exactly what i want!

MIUI/CM7 are AOSP versions if 2.3.x,aka gingerbread. Pinnacle is a leaked version of Gingerbread, made for the captivate by Samsung.

so gingerbread is the way to go? or rather should i say 2.3.. how hard is it for me to upgrade to 2.3 i noticed that some apps aren't even available to me in the market on 2.1. but still i want the features that 2.3 has. Besides just updating to a version of gingerbread, what are the other common things people do for anti-lag/responsiveness, while still being conservative on the battery aspect.Thanks for all the help so far guys!!!

I wasn't pleased with the gingerbread as of yet. It will get better I'm sure of it. Try out one of the 2.2 based roms as they are the most stable at this point.
Sent from my Phoenix JS7 run Samsung Captivate

so what do i do? Just get one of the 2.2's that a developer on here made? that way it has pre made fixes and stuff like lagfix already in it correct? how do i go about installing that and from where?

This thread is the best start.
http://forum.xda-developers.com/showthread.php?t=887525
after looking that over, I followed this one:
http://forum.xda-developers.com/showthread.php?t=884364
and had chosen the Phoenix ROM.

thannks but im still comopletly clueless. What exactly is it that i have to do. I know where to find the .zip rom files, but what is a kernel to a ROM? I really dont get it. does the ROM include the build like 2.2 or 2.3 or what not?

just out of curiosity, do you have AT&T captivate or rogers?

what is Rogers?
Yes. I have AT&T samsung captivate

Rogers is a rom version. You are on stock but rooted. The second link has very easy step by step instructions. The rom u get will have all u need including the kernel and modems
1. Back up ur data with titanium backup. If u don't have it, check market.
2. Flash ur phone with Odin
3. One the flash is done to stock do a master clear with Odin (your phone is on, plugged in and USB debugging)
4. Install the root per directions
5. Copy clockwork and the rom. Of ur choice to ur internal zip
6. Install the clockwork recovery (you run it twice back to back)
7. Run the new rom install with clockwork
I. Phone boots to new rom.
First time it takes about an hour. MAKE SURE YOU READ THE DIRCTIONS IN MY PREVIOUS POST.
Sent from my SAMSUNG-SGH-I897 using XDA App

^^Rogers isn't a ROM version. It's a Canadian cell service provider...

thanks for clearing that up. Had no idea what Rogers was lol. Ok so, i guess i just download and install a ROM of my liking? that will also update me to froyo or 2.3 as well? any recommedations as for as ROMS go?

I stand corrected. The rom will upgrade you to what it is based on. The one I use is froyo based. There are gingerbread roms too. Mosaic seems to be a popular one as was Phoenix that I am running. Best advice.. go read those threads. Look at screenshots they have and the user feedback
Sent from my SAMSUNG-SGH-I897 using XDA App

Personally, I'm a huge fan of DesignGears' roms. I'd suggest you go with something like Cognition 5v2. Its 2.3.3, very stable, very fast, and, since you've only used stocks rom up 'til now, it'll be very familiar (minus all the bloatware). He's also got a step by step guide on how to install the rom. http://forum.xda-developers.com/showthread.php?t=1127578

i was trying to get to use that ROM^^ buuut i had to go to rooted 2.3 first. used this thread http://forum.xda-developers.com/showthread.php?t=1127249&page=31
then i hit a problem, i posted on that thread as well still waiting for a response. idk what happened to my phone...this is my post on that thread "ok so i did this and i hit a problem. I got up to the red fish, i turned off the phone to get it into download mode again. and i did, Placed the kernelKF1.tar file in the pda slot and hit start on odin my phone reboots and right after the AT&t logo my screen goes crazy. it looks as if my screen is tripping on acid... and it just keep looping att logo then that. What should i do? i need the files on my phone atleast its not completly bricked"

bump for a reply....

[Q] Error Reading SD card

So I'm looking to update my ROM. I was currently on Eaglesblood for about a year. Wanted to switch to Miui.
I downloaded the new ROM, put on my SD card and once I reboot in clockwork to flash the ROM it gives me this error.
States installing update...
assert failed: getprop("ro.product.device") ==......
E:error in /sdcard/miui_P990_3.5.24_......zip
Status 7
installation aborted.
Any help would be greatly appreciated.
Thanks

This phone is a P999 not a P990 and judging by the error you tried to install a P990 (O2X) ROM
Sent from my LG-P999

Lol i noticed that too. There are some good roms in the dev section. Take a look
http://forum.xda-developers.com/showthread.php?t=1696956
Here's a link for a Miui rom I myself have been thinking about flashing whenever it is i get tired of cm7 (although unlikely lol). Its even been integrated for 21y baseband in case you're one of the unlucky ones such as myself who use that baseband
-custom sig.

Very cool. Thanks for the help.
When I first flashed the phone I changed the ROMs quite often but after 6 months and a newborn a rarely touched it as the phone worked great.
Once again thanks for the quick help looking to get Miui back on it and see the if the bluetooth issue to a media device has been worked out.

Bluetooth on 21y baseband works with media. It does not work with call audio.
-custom sig.

Help unrooting

cliffs:
Got the phone from a friend of a friend.
It has the cyanogen mod on it (not sure which one)
Been using it for a few months and loved it, but now the phone is really acting weird, screen won't open/delayed etc
I would love to unroot this phone and just go back to regular stock that comes with the g2x but can't really find any good source to tell me how.
Am I screwed since I wasn't the one to root this phone?
Just figured out I have version: Cyanogenmod-7.2.0-p999
Add on:
I've tried to download the stock and I get this
Finding update package...
Opening update package...
Installing update...
Installation aborted.

Try a different cm7 rom
Sent from my LG-P999 using Tapatalk 2

In all honesty I would just flash the latest vanilla version of CM7 from get.cm. Its the most reliable ROM for this phone and way better than any stock firmware released by LG. There's tons of kernels you can flash also if you're into overclocking and undervolting like I am. However the stock cm kernel does the job.

ishoid large
I appreciate the suggestions, however it still does not relate to the more pressing problem of how I can not flash the rom. As pointed out in my first post, it comes up as
"Add on:
I've tried to download the stock and I get this
Finding update package...
Opening update package...
Installing update...
Installation aborted.
"

That sounds like a bad download.

TwitchyEye said:
That sounds like a bad download.
Click to expand...
Click to collapse
It was a pretty old link, is there a link to which rom I should download for stock?

out of curiosity...did you do a full wipe (factory data reset, both caches and format /system) before trying to flash the stock rom? I believe Buru, one of the dev's for the g2x has a stock rooted 2.3.4 rom available for download in the dev section. There's a few of them out there.
If all else fails you could always check out ROM for recovery here- http://forum.xda-developers.com/showthread.php?t=1248644&highlight=search+this+forum

Pain-N-Panic said:
out of curiosity...did you do a full wipe (factory data reset, both caches and format /system) before trying to flash the stock rom? I believe Buru, one of the dev's for the g2x has a stock rooted 2.3.4 rom available for download in the dev section. There's a few of them out there.
If all else fails you could always check out ROM for recovery here- http://forum.xda-developers.com/showthread.php?t=1248644&highlight=search+this+forum
Click to expand...
Click to collapse
I was literally about to send a post here about what you mentioned.
It appears I did have an old download.
I did indeed do a factory data reset, both caches and the delvik (forget how it's spelled) wipe.
I had then succesfully installed back to factory.
so far the only problem I notice is phone calls. it's like a broken TV + fax line noise that is very loud. Any Ideas?

What you need to do is flash the correct baseband fix from here http://forum.xda-developers.com/showthread.php?t=1776843

TwitchyEye said:
What you need to do is flash the correct baseband fix from here http://forum.xda-developers.com/showthread.php?t=1776843
Click to expand...
Click to collapse
You my friend are amazing!!!
Now basically every now and then both on wifi and slightly when not on wifi, I can hear myself echo.
Also for some reason, when I try to video skype someone, my video does not work.
Any suggestions?
so far, glad to have this phone working better than it did before!

The video thing is kinda weird. Which rom are you running? If you're trying to run anything above gingerbread there's tons of issues with video. Mainly that it doesn't work.
The echo thing I think i've seen people mention that but I'm not sure where. I can't remember whether or not it was resolved. All I can think of is some setting somewhere and something about dual mics... yeah. That's all I got. Maybe someone else will remember.

1 more thing if anyone can help. I know I've seen it some where, but I'm not able to use wifi to make calls/send text. I know there was something I had to download but can't find it again.